Prodotti & Accessori - VRSvrsagenzia.it/wpsystem/wp-content/uploads/2015/12/Telwin...PRODOTTI /...

Gennaio - January

Prodotti & AccessoriProducts & Accessories

2016

PRODOTTI / PRODUCTS PAGINA/PAGE• SALDATRICI MMA / MMA WELDING MACHINES .......................................................................................................................... 3 ÷ 4• SALDATRICI MIG-MAG/FLUX / MIG-MAG/FLUX WELDING MACHINES .................................................................................................. 5• SALDATRICI TIG / TIG WELDING MACHINES ..................................................................................................................................... 6• SISTEMI DI TAGLIO AL PLASMA / PLASMA CUTTING SYSTEMS .......................................................................................................... 6• PUNTATRICI / SPOT WELDING MACHINES ....................................................................................................................................... 7• CARICABATTERIE E AVVIATORI / CHARGERS AND STARTERS ....................................................................................................... 7 ÷ 8

PRODOTTI & ACCESSORI / PRODUCTS & ACCESSORIES MOTOINVERTER 174 CE, MOTOINVERTER 204 CE ............................................................................................................................ 9 MOTOINVERTER 254 CE - 264D CE ............................................................................................................................................... 10 THUNDER 220 AC ....................................................................................................................................................................... 11 MASTERMIG 220/2 ..................................................................................................................................................................... 12 MASTERMIG 270/2 ..................................................................................................................................................................... 13 MASTERMIG 300 ......................................................................................................................................................................... 14 MASTERMIG 400 ......................................................................................................................................................................... 15 MASTERMIG 500 (AQUA) .............................................................................................................................................................. 16 SUPERMIG 380 ........................................................................................................................................................................... 17 SUPERMIG 480, SUPERMIG 580 (AQUA) ........................................................................................................................................ 18 TECHNOMIG 150 DUAL SYNERGIC ................................................................................................................................................ 19 TECHNOMIG 180 DUAL SYNERGIC ................................................................................................................................................ 20 TECHNOMIG 210 DUAL SYNERGIC ................................................................................................................................................ 21 TECHNOMIG 215 DUAL SYNERGIC ................................................................................................................................................ 22 TECHNOMIG 223 TREO SYNERGIC ................................................................................................................................................ 23 TECHNOMIG 225 PULSE ............................................................................................................................................................. 24 ELECTROMIG 220 SYNERGIC ........................................................................................................................................................ 25 ELECTROMIG 230 WAVE ............................................................................................................................................................... 26 ELECTROMIG 330 WAVE ............................................................................................................................................................... 27 SUPERIOR 400 CE VRD MIG PACK (AQUA) ..................................................................................................................................... 28 SUPERIOR 630 CE VRD MIG PACK (AQUA) ..................................................................................................................................... 29 INVERPULSE 320 MIG/TIG/MMA (AQUA) ....................................................................................................................................... 30 INVERPULSE 425 MIG/TIG/MMA (AQUA) ....................................................................................................................................... 31 INVERPULSE 625 MIG/TIG/MMA (AQUA) ....................................................................................................................................... 32 FORCE 170 TIG DC-LIFT ................................................................................................................................................................ 33 TECNICA 190 TIG DC-LIFT VRD ...................................................................................................................................................... 34 ADVANCE 227 MV/PFC TIG DC-LIFT VRD ....................................................................................................................................... 35 TECNICA TIG 160 DC-HF/LIFT ....................................................................................................................................................... 36 TECHNOLOGY TIG 185 DC-HF/LIFT ................................................................................................................................................ 37 TECHNOLOGY TIG 230 DC-HF/LIFT VRD ......................................................................................................................................... 38 TECHNOLOGY TIG 182 AC/DC-HF/LIFT .......................................................................................................................................... 39 TECHNOLOGY TIG 222 AC/DC-HF/LIFT VRD ................................................................................................................................... 40 SUPERIOR TIG 251 DC-HF/LIFT VRD .............................................................................................................................................. 41 SUPERIOR TIG 252 AC/DC-HF/LIFT VRD (AQUA) ............................................................................................................................. 42 SUPERIOR TIG 311 DC-HF/LIFT ..................................................................................................................................................... 43 SUPERIOR TIG 322 AC/DC-HF/LIFT (AQUA) ............................................................................................................................ 44 ÷ 45 SUPERIOR TIG 421 DC-HF/LIFT (AQUA) .................................................................................................................................. 46 ÷ 47 SUPERIOR TIG 422 AC/DC-HF/LIFT (AQUA) ............................................................................................................................ 48 ÷ 49 SUPERTIG 200 AC/DC-HF ............................................................................................................................................................. 50 SUPERTIG 280/1 AC/DC-HF/LIFT (AQUA) ....................................................................................................................................... 51 TECNICA PLASMA 31 ................................................................................................................................................................... 52 TECHNOLOGY PLASMA 41................................................................................................................................................ ............ 52 TECHNOLOGY PLASMA 54 KOMPRESSOR ...................................................................................................................................... 52 SUPERIOR PLASMA 60 HF ............................................................................................................................................................ 53 SUPERIOR PLASMA 90 HF ............................................................................................................................................................ 53 SUPERIOR PLASMA 160 .............................................................................................................................................................. 53 ENTERPRISE PLASMA 160 HF ....................................................................................................................................................... 54 SUPERPLASMA 83 HF .................................................................................................................................................................. 54 SUPERPLASMA 130 HF ................................................................................................................................................................ 54

• ACCESSORI CARICABATTERIE, KIT TIG / BATTERY CHARGERS ACCESSORIES, TIG KIT ....................................................................... 55• ACCESSORI MMA, CAVI, RIDUTTORI / MMA ACCESSORIES, CABLES, GAS REGULATORS, TIG PULSE, CLEANTECH ............................... 56• CONSUMABILI TIG / TIG CONSUMABLES ....................................................................................................................................... 57• ACCESSORI MIG-MAG / MIG-MAG ACCESSORIES ..................................................................................................................... 58÷60• CONSUMABILI MIG-MAG / MIG-MAG CONSUMABLES ................................................................................................................ 61÷64• CONSUMABILI PLASMA / PLASMA CONSUMABLES ....................................................................................................................... 65• CARRELLI, G.R.A., STRUMENTAZIONE, ACCESSORI SMART INDUCTOR 5000, PINZE TROLLEYS, WATER COOLING SYSTEMS, INSTRUMENTATION, ACCESSORIES FOR SMART INDUCTOR 5000, CLAMPS .......................... 66• ACCESSORI / ACCESSORIES STUDDER......................................................................................................................................... 67• ACCESSORI/ ACCESSORIES ALUCAR-ALUPSOTTER, PULLER STATION COMBO, STEEL STARTER, ALU STARTER STATION ..................... 68• PINZE, BRACCI ED ELETTRODI / CLAMPS, ARMS AND ELECTRODES .......................................................................................... 69÷70• MASCHERE, SCHERMI & COPERTE / HELMETS, SCREENS & BLANKETS, WELDWEAR ........................................................................ 71• TESTER, ELETTRODI, CAVI DI AVVIAMENTO, GUANTI / TESTERS, ELECTRODES, STARTING CABLES, GLOVES .......................................... 72• BLISTER ............................................................................................................................................................................... 73÷74• ACCESSORI SFUSI / BULK ACCESSORIES ..................................................................................................................................... 74

INDICE - INDEX

CATALOGO-LISTINO • CATALOGUE-PRICE LIST 01/2016 3

CODICECODE

MODELLOMODEL

ALIMENTAZIONEMAINS VOLTAGE

FASIPHASES €

PREZZI UNITARIESCLUSI DI I.V.A.UNIT PRICEWITHOUT V.A.T.

MMA WELDING

815872 FORCE 125 + acc. & valigetta cartone/acc. & cardboard carry case NEW 230V 1ph815873 FORCE 145 + acc. & valigetta cartone/acc. & cardboard carry case NEW 230V 1ph

815856 FORCE 145 + acc. & valigetta plastica/acc. & plastic carry case 230V 1ph 36/30

815853 FORCE 165 230V 1ph 84


815858 FORCE 195 230V 1ph 84


815861 FORCE 125 + acc. & maschera Tiger /acc. & Tiger mask 230V 1ph 32/24

815862 FORCE 145 + acc. & maschera Tiger /acc. & Tiger mask 230V 1ph 32/24

815863 FORCE 165 + acc. & maschera automatica/acc. & automatic mask 230V 1ph 32/24

816002 TECNICA 151/S 230V 1ph 76816202 TECNICA 151/S + acc. & valigetta plastica/acc. & plastic carry case 230V 1ph 36/30



816005 TECHNOLOGY 186 HD 230V 1ph 48/36816205 TECHNOLOGY 186 HD + acc. & val. ALU/acc. & ALU carry case 230V 1ph 30

816006 TECHNOLOGY 216 HD 230V 1ph 48/36816206 TECHNOLOGY 216 HD + acc. & val. ALU/acc. & ALU carry case 230V 1ph 30

816007 TECHNOLOGY 236 HD 230V 1ph 42816207 TECHNOLOGY 236 HD + acc. & val. ALU/acc. & ALU carry case 230V 1ph 30

816014 FORCE 170 TIG DC-LIFT 230V 1ph 84852044 FORCE 170 TIG DC-LIFT + ACX (MMA) 230V 1ph

816019 TECNICA 190 TIG DC-LIFT VRD 230V 1ph 76852045 TECNICA 190 TIG DC-LIFT VRD + ACX (MMA) 230V 1ph

816009 ADVANCE 187 MV/PFC 100V÷240V 1ph 42

852047 ADVANCE 187 MV/PFC + ACX 100V÷240V 1ph

816010 ADVANCE 227 MV/PFC TIG DC-LIFT VRD 100V÷240V 1ph 42

852048 ADVANCE 227 MV/PFC TIG DC-LIFT VRD + ACX (MMA) 100V÷240V 1ph

816011 FORCE 168 MPGE 230V 1ph 84816211 FORCE 168 MPGE + acc. & val. plastica/acc. & plastic carry case 230V 1ph 36/30

816012 TECNICA 188 MPGE 230V 1ph 76816212 TECNICA 188 MPGE+acc. & valigetta plastica/acc. & plastic carry 230V 1ph 36/30

816013 TECHNOLOGY 238 CE/MPGE 230V 1ph 42816213 TECHNOLOGY 238 CE/MPGE + acc. & val. ALU/acc. & ALU carry case 230V 1ph 30

816020 SUPERIOR 245 400V 3ph 42

816036 SUPERIOR 320 CE VRD (cellulosic) 230/400V 3ph 21/14



INVERTER SALDATRICI AD INVERTERINVERTER WELDING MACHINES

Q.TA’ / Q.TYPALLET

173,00224,00

242,00

240,00

291,00

293,00

347,00

181,00

250,00

337,00

296,00347,00

311,00362,00

365,00421,00

413,00490,00

459,00536,00

638,00714,00

332,00376,00

408,00463,00

485,00

539,00

740,00

794,00

268,00319,00

354,00408,00

676,00752,00

740,00

1.600,00

2.680,00

4.130,00

CODICECODE

MODELLOMODEL €


CATALOGO-LISTINO • CATALOGUE-PRICE LIST 01/20164

ELECTROMEC. MOTOSALDATRICI TRADIZIONALI - MOTORE BENZINA/DIESELTRADITIONAL ENGINE-DRIVEN WELDING MACHINES - PETROL/DIESEL ENGINE

(*) Non disponibile in Europa / Not for sale in Europe (**) Aumento del 10% per due tensioni speciali /10% increase for two special voltages

814097 QUALITY 280 AC/DC 230/400V 1ph/2ph 12

817019 EURARC 310 230/400V 1ph/2ph 12817016 EURARC 410 230/400V 1ph/2ph 6/3

817014 EURARC 322 52/76V (basico/basic) 230/400V 1ph/2ph 12817017 EURARC 422 52/73V (basico/basic) 230/400V 1ph/2ph 6/3817018 EURARC 522 52/71V (basico/basic) 230/400V 1ph/2ph 6/3

818002 LINEAR 280 230/400V 3ph 6/3

819020 LINEAR 340 230/400V 3ph 6/3

818007 LINEAR 300/S 230/400V 3ph 6/3

819090 ** LINEAR 430 HD NEW 230/400V 3ph 3

819055 ** LINEAR 530 HD 230/400V 3ph 3

819082 ** LINEAR 630 HD 230/400V 3ph 3

809039 MARTE 150 + accessori/accessories 230V 1ph 40/30814160 PRATICA 152 + accessori/accessories 230V 1ph 40/30

812015 PRATICA 182 + accessori/accessories NEW 230V 1ph 40/30

809200 MODERNA 150 + accessori/accessories 230V 1ph 40/30

814104 NORDICA 4.181 TURBO + accessori/accessories 230V 1ph 27/18

814023 NORDICA 4.181/R TURBO + accessori/accessories 230V 1ph 27/18

814105 NORDICA 4.185 TURBO + accessori/accessories 230/400V 1ph/2ph 27/18814175 NORDICA 4.220 TURBO + accessori/accessories 230/400V 1ph/2ph 27/18814176 NORDICA 4.280 TURBO + accessori/accessories 230/400V 1ph/2ph 27/18

814189 NORDIKA 1800 TURBO + accessori/accessories 230V 1ph 40/30814193 NORDIKA 2160 TURBO + accessori/accessories 230V 1ph 27/18

814180 NORDIKA 3200 TURBO + accessori/accessories 230/400V 1ph/2ph 18/12

812012 NORDIKA 3250 TURBO + accessori/accessories 230/400V 1ph/2ph 18/12

814178 ARTIKA 220 TURBO 230/400V 1ph/2ph 12

812011 ARTIKA 270 230/400V 1ph/2ph 12

MMA WELDING

ELECTROMEC.

ELECTROMEC.

ELECTROMEC.

ELECTROMEC.

SALDATRICI ELETTROMECCANICHE IN CORRENTE ALTERNATA (AC)ELECTROMECHANICAL WELDING MACHINES IN ALTERNATING CURRENT (AC)

SALDATRICE ELETTROMECCANICA VENTILATA IN CORRENTE ALTERNATA E CONTINUA (AC/DC)ELECTROMECHANICAL FAN-COOLED WELDING MACHINE IN ALTERNATING AND DIRECT CURRENT (AC/DC)

SALDATRICI ELETTROMECCANICHE VENTILATE IN CORRENTE ALTERNATA (AC)ELECTROMECHANICAL FAN-COOLED WELDING MACHINES IN ALTERNATING CURRENT (AC)

SALDATRICI ELETTROMECCANICHE VENTILATE IN CORRENTE CONTINUA (DC)ELECTROMECHANICAL FAN-COOLED WELDING MACHINES IN DIRECT CURRENT (DC)

NOTES

825001 THUNDER 220 AC motore HONDA / HONDA engine Benzina/Petrol 2825002 * THUNDER 304 CE motore KOHLER / KOHLER engine Benzina/Petrol NO EU825005 * THUNDER 304 CE motore HONDA / HONDA engine Benzina/Petrol NO EU

825003 * THUNDER 314D CE motore LOMBARDINI / LOMBARDINI engine Diesel NO EU


FASIPHASES


815791 MOTOINVERTER 174 CE motore HONDA / HONDA engine Benzina/Petrol 6815793 MOTOINVERTER 204 CE motore HONDA / HONDA engine Benzina/Petrol 4/2815975 MOTOINVERTER 254 CE motore HONDA / HONDA engine Benzina/Petrol 2

815980 MOTOINVERTER 264D CE motore LOMBARDINI / LOMBARDINI engine Diesel 2

204,00

265,00

296,00

280,00

314,00

546,00

344,00683,00

484,00893,00

1.423,00

970,00

1.200,00

1.046,00

1.560,00

2.800,00

3.260,00

102,00135,00

158,00

153,00

178,00

186,00

206,00250,00260,00

168,00

2.800,007.500,007.900,00

10.700,00

INVERTER MOTOSALDATRICI AD INVERTER - MOTORE BENZINA/DIESELINVERTER ENGINE-DRIVEN WELDING MACHINES - PETROL/DIESEL ENGINE

2.040,003.060,003.820,006.810,00

CODICECODE

MODELLOMODEL €



820081 BIMAX 105 no gas (fl ux) 230V 1ph 45820005 BIMAX 4.135 TURBO dual gas 230V 1ph 27/18821015 BIMAX 4.165 TURBO dual gas 230V 1ph 18/12821016 BIMAX 4.195 TURBO dual gas 230V 1ph 18/12821010 BIMAX 132 TURBO dual gas 230V 1ph 18/12821011 BIMAX 152 TURBO dual gas 230V 1ph 18/12821012 BIMAX 162 TURBO dual gas 230V 1ph 18/12821052 TELMIG 150/1 TURBO 230V 1ph 18/12821054 TELMIG 170/1 TURBO 230V 1ph 6/3821055 TELMIG 180/2 TURBO 230V 1ph 6/3821069 TELMIG 195/2 TURBO 230V/400V 1ph/2ph 6/3821056 TELMIG 200/2 TURBO 230V 1ph 6/3821070 TELMIG 251/2 TURBO 230V 1ph 6/3820099 TELMIG 281/2 TURBO 230V 1ph 6/3821060 TELMIG 203/2 TURBO 230/400V 3ph 6/3821061 TELMIG 250/2 TURBO 230/400V 3ph 6/3821064 MASTERMIG 220/2 230/400V 3ph 3821065 MASTERMIG 270/2 230/400V 3ph 3827003 MASTERMIG 300 (4 rulli/rolls) 230/400V 3ph 2827004 MASTERMIG 400 (4 rulli/rolls) 230/400V 3ph 2827007 MASTERMIG 500 (4 rulli/rolls) 230/400V 3ph 2822008 MASTERMIG 500 AQUA (4 rulli/rolls) 230/400V 3ph822043 SUPERMIG 380 (4 rulli/rolls) 230/400V 3ph822044 SUPERMIG 480 (4 rulli/rolls) 230/400V 3ph822045 SUPERMIG 580 (4 rulli/rolls) 230/400V 3ph

822046 SUPERMIG 480 AQUA (4 rulli/rolls) 230/400V 3ph822047 SUPERMIG 580 AQUA (4 rulli/rolls) 230/400V 3ph

820030 DIGITAL MIG 330 SYNERGIC (4 rulli/rolls) 230/400V 3ph 3

816050 TECHNOMIG 150 DUAL SYNERGIC 230V 1ph 18/12816051 TECHNOMIG 180 DUAL SYNERGIC 230V 1ph 18/12816054 TECHNOMIG 180 DUAL SYNERGIC EURO 230V 1ph 18/12816052 TECHNOMIG 210 DUAL SYNERGIC 230V 1ph 18/12816053 TECHNOMIG 215 DUAL SYNERGIC 230V 1ph 8/4852026 TECHNOMIG 225 PULSE MIG/TIG/MMA 230V 1ph816058 TECHNOMIG 223 TREO SYNERGIC 230V 1ph816120 TECHNOMIG 223 TREO SYNERGIC + SPOOL GUN M6 230V 1ph816059 ELECTROMIG 220 SYNERGIC 400V 3ph816060 ELECTROMIG 230 WAVE NEW 400V 3ph816061 ELECTROMIG 330 WAVE (4 rulli/rolls) NEW 400V 3ph816041 SUPERIOR 400 CE VRD - MIG PACK (4 rulli/rolls) 230÷400V 3ph816043 SUPERIOR 630 CE VRD - MIG PACK (4 rulli/rolls) 230÷400V 3ph816042 SUPERIOR 400 CE VRD - MIG PACK AQUA (4 rulli/rolls) 230÷400V 3ph816044 SUPERIOR 630 CE VRD - MIG PACK AQUA (4 rulli/rolls) 230÷400V 3ph815301 INVERPULSE 320 MIG/TIG/MMA (4 rulli/rolls) 400V 3ph815479 INVERPULSE 425 MIG/TIG/MMA (4 rulli/rolls) 400V 3ph815490 INVERPULSE 625 MIG/TIG/MMA (4 rulli/rolls) 400V 3ph

815336 INVERPULSE 320 MIG/TIG/MMA AQUA (4 rulli/rolls) 400V 3ph815488 INVERPULSE 425 MIG/TIG/MMA AQUA (4 rulli/rolls) 400V 3ph815500 INVERPULSE 625 MIG/TIG/MMA AQUA (4 rulli/rolls) 400V 3ph

MIG-MAG/ FLUX WELDING

ELECTROMEC. SALDATRICI ELETTROMECCANICHE A FILO MIG-MAGMIG-MAG ELECTROMECHANICAL WELDING MACHINES

INVERTER SALDATRICI INVERTER SINERGICHE A FILO MIG-MAG (GAS/FLUX)MIG-MAG (GAS/FLUX) SYNERGIC INVERTER WELDING MACHINES

DIGITAL SALDATRICE DIGITALE A FILO MIG-MAG (GAS)MIG-MAG (GAS) DIGITAL WELDING MACHINE



FASIPHASES

296,00408,00472,00586,00459,00500,00536,00515,00700,00790,00944,00990,00

1.148,001.330,001.230,001.330,001.500,001.760,002.300,002.700,003.300,004.500,002.800,004.080,005.600,00

5.360,006.900,00

2.450,00

612,00714,00790,00969,00

1.150,002.960,002.250,002.754,001.740,002.430,00

INFO 20164.200,005.760,005.360,006.900,005.100,008.400,009.950,00

6.900,009.560,00

11.250,00

CODICECODE

MODELLOMODEL €



816214 • FORCE 170 TIG DC-LIFT + acc. TIG & val. PLASTICA/PLASTIC carry case 230V 1ph 36/30816220 • TECNICA 190 TIG DC-LIFT VRD + acc. TIG/MMA & val. PLASTICA/PLASTIC carry case 230V 1ph 36/30852052 • ADVANCE 227 MV/PFC TIG DC-LIFT VRD + acc. TIG / TIG acc. 100÷240V 1ph815957 • TECNICA TIG 160 DC-HF/LIFT + acc. TIG & val. ALU / ALU carry case 230V 1ph 30815956 • TECHNOLOGY TIG 185 DC-HF/LIFT + acc. TIG & val. ALU / ALU carry case 230V 1ph 30/24852055 • TECHNOLOGY TIG 230 DC-HF/LIFT VRD + acc. TIG / TIG acc. NEW 230V 1ph852030 • TECHNOLOGY TIG 182 AC/DC-HF/LIFT + acc. TIG / TIG acc. 230V 1ph852054 • TECHNOLOGY TIG 222 AC/DC-HF/LIFT VRD + acc. TIG / TIG acc. 230V 1ph816116 • SUPERIOR TIG 251 DC-HF/LIFT VRD + acc. TIG / TIG acc. 400V 3ph816117 • SUPERIOR TIG 252 AC/DC-HF/LIFT VRD + acc. TIG / TIG acc. 400V 3ph816100 • SUPERIOR TIG 311 DC-HF/LIFT + acc. TIG / TIG acc. 400V 3ph816101 • SUPERIOR TIG 322 AC/DC-HF/LIFT + acc. TIG / TIG acc. 400V 3ph816103 • SUPERIOR TIG 421 DC-HF/LIFT + acc. TIG / TIG acc. 400V 3ph816105 • SUPERIOR TIG 422 AC/DC-HF/LIFT + acc. TIG / TIG acc. 400V 3ph816119 SUPERIOR TIG 252 AC/DC-HF/LIFT VRD AQUA

+ acc. tig + G.R.A. 4500/ tig acc. + G.R.A. 4500400V 3ph

816102 SUPERIOR TIG 322 AC/DC-HF/LIFT AQUA+ acc. tig + carrello + G.R.A. 4000/ tig acc. + trolley + G.R.A. 4000

400V 3ph

816104 SUPERIOR TIG 421 DC-HF/LIFT AQUA+ acc. tig + carrello + G.R.A. 4000/ tig acc. + trolley + G.R.A. 4000

400V 3ph

816106 SUPERIOR TIG 422 AC/DC-HF/LIFT AQUA+ acc. tig + carrello + G.R.A. 4000/ tig acc. + trolley + G.R.A. 4000

400V 3ph

816014 •• FORCE 170 TIG DC-LIFT 230V 1ph 84816019 •• TECNICA 190 TIG DC-LIFT VRD 230V 1ph 76816010 •• ADVANCE 227 MV/PFC TIG DC-LIFT VRD 100÷240V 1ph 42815189 •• TECNICA TIG 160 DC-HF/LIFT 230V 1ph 63815497 •• TECHNOLOGY TIG 185 DC-HF/LIFT 230V 1ph 36/24816040 •• TECHNOLOGY TIG 230 DC-HF/LIFT VRD NEW 230V 1ph 42/28

815332 •• TECHNOLOGY TIG 182 AC/DC-HF/LIFT 230V 1ph 42/28816033 •• TECHNOLOGY TIG 222 AC/DC-HF/LIFT VRD 230V 1ph 30/20816029 •• SUPERIOR TIG 251 DC-HF/LIFT VRD 400V 3ph 30/20816030 •• SUPERIOR TIG 252 AC/DC-HF/LIFT VRD 400V 3ph 21/14816015 •• SUPERIOR TIG 311 DC-HF/LIFT 400V 3ph 30/20816016 •• SUPERIOR TIG 322 AC/DC-HF/LIFT 400V 3ph 12/6816017 •• SUPERIOR TIG 421 DC-HF/LIFT 400V 3ph 12/6816018 •• SUPERIOR TIG 422 AC/DC-HF/LIFT 400V 3ph 12/6

832160 *** SUPERTIG 200 AC/DC-HF + acc. TIG / TIG acc. 400V 2ph 3832161 *** SUPERTIG 280/1 AC/DC-HF/LIFT + acc. TIG / TIG acc. 400V 2ph 3833017 *** SUPERTIG 280/1 AC/DC-HF/LIFT AQUA + acc. TIG / TIG acc. + G.R.A. 90 400V 2ph

850000 CLEANTECH 100 Sistema di pulizia TIG/MIG-inox / TIG/MIG-inox cleaning system 230V 1ph

815014 • TECNICA PLASMA 31 230V 1ph 40/30815493 • TECHNOLOGY PLASMA 41 230V 1ph 30815088 • TECHNOLOGY PLASMA 54 KOMPRESSOR 230V 1ph 21/14815506 • SUPERIOR PLASMA 60 HF 400V 3ph815518 • SUPERIOR PLASMA 90 HF 400V 3ph816174 • SUPERIOR PLASMA 160 230/400V 3ph

815870 • ENTERPRISE PLASMA 160 HF 230/400V 3ph 3

830511 • SUPERPLASMA 83 HF 230/400V 3ph 3830512 • SUPERPLASMA 130 HF 230/400V 3ph 3

(•) Completo di torcia, cavo e pinza di massa / Complete with torch, work cable and clamp (••) Solo generatore / Generator only

TIG WELDING

INVERTER

INVERTER

CHOPPER

ELECTROMEC

SALDATRICI INVERTER PER LA SALDATURA TIG DC, TIG AC/DCTIG DC, TIG AC/DC INVERTER WELDING MACHINES

SISTEMI AD INVERTER PER IL TAGLIO AL PLASMAINVERTER PLASMA CUTTING SYSTEMS

SISTEMA CHOPPER PER IL TAGLIO AL PLASMACHOPPER PLASMA CUTTING SYSTEM

SISTEMI ELETTROMECCANICI PER IL TAGLIO AL PLASMAELECTROMECHANICAL PLASMA CUTTING SYSTEMS

PLASMA CUTTING

(***) Su richiesta 230V con aumento del 10% / On request 230V with 10% increase


FASIPHASES


482,00600,00944,00

1.020,001.170,001.440,001.960,002.460,001.850,002.720,002.280,004.230,003.470,005.020,003.520,00

5.640,00

4.870,00

6.430,00

332,00 408,00740,00765,00905,00

1.150,00

1.730,002.190,001.580,002.450,002.000,003.950,003.190,004.740,00

2.300,003.520,004.390,00

410,00

970,001.020,001.326,00

2.450,003.650,005.600,00

2.730,003.650,00

5.760,00

CODICECODE

MODELLOMODEL €



Confezione da / In packages of (***) Su richiesta 230V con aumento del 10% / On request 230V with 10% increase

824039 *** PTE 18 400V 2ph 3824041 *** PTE 28 400V 2ph 3

823075 INVERSPOTTER 12000 + acc. + G.R.A + bilanciere/balancer 400V 3ph 1823076 INVERSPOTTER 13000 + acc. & carrello/acc. & trolley 400V 3ph823078 INVERSPOTTER 13500 SMART + acc. /acc. 400V 3ph 2823079 INVERSPOTTER 13500 SMART AQUA + acc. /acc. + G.R.A 400V 3ph 2823077 INVERSPOTTER 14000 AQUA + acc. + G.R.A / acc. + G.R.A 400V 3ph 1823093 INVERSPOTTER 14000 SMART AQUA + acc. + G.R.A / acc. + G.R.A. 400V 3ph 1

823015 MODULAR 20/TI 230V 1ph 30823016 DIGITAL MODULAR 230 230V 1ph 30823017 DIGITAL MODULAR 400 400V 2ph 30

SPOT WELDING

INVERTER

THYRISTORS

THYRISTORS

835012 SMART INDUCTOR 5000 TWISTER + accessorio/ accessories HEAT TWISTER 200V÷240V 1ph 18/12865011 SMART INDUCTOR 5000 CLASSIC + accessori/accessories

(heat twister, super remover, pad inductor)NEW 200V÷240V 1ph 18/12

865012 SMART INDUCTOR 5000 DELUXE + 6 accessori / 6 accessories (heat twister, super remover, metal releaser, pad inductor, wonder pen II, glass genius)

200V÷240V 1ph

828069 ALUCAR 5100 + accessori standard/ standard accessories 230V 1ph 30823049 ALUSPOTTER 6100 + accessori standard/ standard accessories 115/230V 1ph

828119 DIGITAL PULLER 5500 + accessori/accessories 400V 2ph828118 DIGITAL PULLER 5500 + accessori/accessories 230V 1ph823232 DIGITAL CAR SPOTTER 5500 + accessori/accessories 400V 2ph823219 DIGITAL CAR SPOTTER 5500 + accessori/accessories 230V 1ph823234 DIGITAL CAR SPOTTER 5500 TOUCH + accessori/accessories 400V 2ph823233 DIGITAL CAR SPOTTER 5500 TOUCH + accessori/accessories 230V 1ph823198 DIGITAL SPOTTER 7000 + acc. & carrello/acc. & trolley 400V 2ph823195 *** DIGITAL SPOTTER 9000 + accessori/accessories 400V 2ph 2823196 *** DIGITAL SPOTTER 9000 AQUA + accessori/accessories 400V 2ph 2

ELECTRONIC

ELECTRONIC

ELECTROMEC.

ELECTRONIC

GENERATORI ELETTROMECCANICI PER LA SALDATURA A SCARICA DI CONDENSATORIELECTROMECHANICAL POWER SOURCES FOR CAPACITOR DISCHARGE WELDING

SISTEMI INTELLIGENTI DI RIPARAZIONE E RIMOZIONE / REPAIR & REMOVE SMART SYSTEMS

SALDATRICI A RESISTENZA ELETTRONICHE CON MICROPROCESSOREMICROPROCESSOR CONTROLLED ELECTRONIC SPOT-WELDING MACHINES

SALDATRICI A RESISTENZA INVERTER CON MICROPROCESSOREMICROPROCESSOR CONTROLLED INVERTER SPOT-WELDING MACHINES

SALDATRICI A RESISTENZA PORTATILI / PORTABLE SPOT-WELDING MACHINES

SALDATRICI A RESISTENZA A COLONNA CONTROLLATE A TIRISTORI CON AZIONAMENTO A PEDALETHYRISTOR-CONTROLLED COLUMN SPOT WELDERS WITH PEDAL CONTROL

SALDATRICI A RESISTENZA A COLONNA CONTROLLATE A TIRISTORI CON AZIONAMENTO PNEUMATICOTHYRISTOR-CONTROLLED COLUMN SPOT WELDERS WITH PNEUMATIC CONTROL

NOTES

CHARGING

CHARGING

CARICABATTERIE CON CONTROLLO ELETTRONICO DELLA CORRENTE DI CARICA (TRONIC/PULSE-TRONIC)BATTERY CHARGERS WITH ELECTRONIC CONTROL OF CHARGING CURRENT (TRONIC/PULSE-TRONIC)

CARICABATTERIE ELETTRONICI MULTIFUNZIONE / MULTIFUNCTION ELECTRONIC BATTERY CHARGERS

824043 *** PCP 18 400V 2ph 3824045 *** PCP 28 400V 2ph 3

CHARGING & STARTING807587 PULSE 30 PFC 6/12/24V 230V 1ph 99/88807588 PULSE 50 PFC 6/12/24V 230V 1ph 99/88807585 DOCTOR CHARGE 30 PFC 6/12/24V 230V 1ph 99/88807586 DOCTOR CHARGE 50 PFC 6/12/24V 230V 1ph 99/88807590 DOCTOR CHARGE 130 NEW 12/24V 230V 1ph



FASIPHASES

807553 4 DEFENDER 8 6/12V 100÷240V 720807560 4 T-CHARGE 12 12V 230V 432807564 4 T-CHARGE 12 LITHIUM EDITION 12V 230V 432807563 2 T-CHARGE 20 BOOST 12/24V 230V 180807562 2 T-CHARGE 26 BOOST 12V 230V 180807027 6 NEVATRONIC 12 12V 230V 180807045 6 NEVATRONIC 24 12/24V 230V 180807540 AUTOTRONIC 25 BOOST 12/24V 230V 56/42

28,0077,0082,00

117,00150,00102,00117,00178,00

13.000,00 6.630,00

638,00816,00842,00

3.570,004.080,00

1.150,001.680,00

2.500,00

1.173,001.964,00

840,00890,00

1.220,001.275,001.220,001.275,002.400,003.060,004.600,00

4.440,005.100,00

250,00293,00320,00360,00638,00

A RICHIESTA / CONTACT US





CODICECODE

MODELLOMODEL €


Confezione da / In packages of (•••) Con temporizzatore / With timer

CHARGING & STARTING

NOTES

CHARGING

CHARGING

CHARGING

CHARGINGSTARTING

STARTING

CHARGING

POWERINVERTER

CHARGING

CHARGING

CARICABATTERIE PER CARICA NORMALE - CARICA RAPIDA (BOOST)BATTERY CHARGERS WITH SELECTOR FOR NORMAL OR QUICK (BOOST) CHARGE

CARICABATTERIE PER CARICA NORMALE - CARICA RAPIDA (BOOST)BATTERY CHARGERS - NORMAL OR QUICK (BOOST) CHARGE

CARICABATTERIE E AVVIATORI CON TEMPORIZZATORE E COMANDO A DISTANZABATTERY CHARGERS AND STARTERS WITH TIMER AND REMOTE CONTROL

CHARGINGSTARTING

CARICABATTERIE E AVVIATORI CON CONTROLLO ELETTRONICO DELLA CARICA (TRONIC / PULSE-TRONIC)BATTERY CHARGERS AND STARTERS WITH ELECTRONIC CHARGE CONTROL (TRONIC / PULSE-TRONIC)

CARICABATTERIE TRADIZIONALI / TRADITIONAL BATTERY CHARGERS

CARICABATTERIE PROFESSIONALE MULTITENSIONE / MULTIVOLTAGE PROFESSIONAL BATTERY CHARGER

CARICABATTERIE E AVVIATORI PROFESSIONALI / PROFESSIONAL BATTERY CHARGERS AND STARTERS

CONVERTITORI INVERTER 12V DC - 230V AC / POWER INVERTERS 12V DC - 230V AC

AVVIATORI A BATTERIA / BATTERY-POWERED STARTERS

CARICABATTERIE E MANTENITORI SOLARI / SOLAR TRICKLE CHARGERS



807576 ALASKA 150 START 12V 230V807577 ALASKA 200 START 12/24V 230V829327 DIGISTART 340 PULSE-TRONIC 12/24V 230V 18829033 STARTRONIC 330 6/12/24V 230V 18/12829034 STARTRONIC 530 6/12/24V 230V 18/12

807554 4 TOURING 11 NEW 6/12V 230V807555 4 TOURING 15 12/24V 230V807556 4 TOURING 18 12/24V 230V807022 6 NEVADA 10 12V 230V 180807023 6 NEVADA 11 6/ 12V 230V 180807025 6 NEVADA 14 12V 230V 180807026 6 NEVADA 15 12/24V 230V 180

807063 COMPUTER 48/2 PROF 6/12/24/36/48V 230V 18

807028 6 NEVABOOST 100 12V 230V 180807541 NEVABOOST 140 12V 230V 95/76

807542 ALPINE 13 12V 230V 95/76807544 ALPINE 15 12/24V 230V 95/76807545 ALPINE 18 BOOST 12/24V 230V 95/76807546 ALPINE 20 BOOST 12/24V 230V 56/42807547 ALPINE 30 BOOST 12/24V 230V 56/42807548 ALPINE 50 BOOST 12/24V 230V 36/27

807538 LEADER 150 START 12V 230V 56/42807539 LEADER 220 START 12/24V 230V 56/42807551 LEADER 400 START 12/24V 230V 36/27829390 SPRINTER 3000 START NEW 12/24V 230V829391 SPRINTER 4000 START NEW 12/24V 230V829392 SPRINTER 6000 START NEW 12/24V 230V829381 DYNAMIC 320 START 12/24V 230V 18829382 DYNAMIC 420 START 12/24V 230V 18829383 ••• DYNAMIC 520 START 12/24V 230V 9/6829384 ••• DYNAMIC 620 START 12/24V 230V 9/6

829385 ••• ENERGY 650 START 12/24V 230/400V 9/6829008 ••• ENERGY 1000 START 12/24V 230/400V 6/4829009 ••• ENERGY 1500 START 12/24V 230/400V 6/4

807583 2 SOLARA 1.5 12V807584 2 SOLARA 5.0 12V807581 2 SOLARA FLEXO 5.0 12V807582 2 SOLARA FLEXO 10.0 12V

829562 2 DRIVE MINI NEW 12V 230V829565 2 DRIVE 9000 12V 230V829566 2 DRIVE 13000 12V 230V829522 STARTZILLA 3024 NEW 12/24V 230V829567 FLASH START 700 NEW 12V829519 SPEED START 1212 NEW 12V 230V 78/52829518 PRO START 1712 12V 230V 45829520 PRO START 2012 12V 230V 39/26829517 PRO START 2824 12/24V 230V 39/26829570 START PLUS 4824 12/24V 230V 12829571 START PLUS 6824 12/24V 230V 6/3

829444 6 CONVERTER 310 USB 12V 230V - 300W 360829446 2 CONVERTER 500 12V 230V - 500W 108829447 CONVERTER 1000 12V 230V-1000W 96

107,00148,00480,00800,00970,00

148,00204,00245,00224,00290,00400,00306,00357,00438,00505,00

1.120,001.250,002.140,00

41,0051,0062,0056,0061,0071,0077,00

84,0094,00

107,00135,00178,00217,00

434,00

82,00140,00250,00

84,00153,00

122,00166,00200,00640,00306,00122,00224,00280,00400,00890,00

1.430,00

33,0076,00

100,00135,00


MOTOINVERTER 174 - 204 CEMOTOSALDATRICI INVERTER MMA E TIG DCMMA AND TIG DC ENGINE-DRIVEN WELDING MACHINES

801000 KIT SALDATURA MMA 10 MMQ 3+2M DX 25 MMA WELDING KIT 10 MMQ 3+2M DX 25 45,00

801096 KIT SALDATURA MMA 200A 16 MMQ 3+2M DX 25 MMA WELDING KIT 200A 16 MMQ 3+2M DX 25 55,00

801097 KIT SALDATURA TIG TIG WELDING KIT 190,00

815791 MOTOINVERTER 174 CE 2.040,00


802117 KIT RUOTE WHEELS KIT 72,00


802584 KIT ALIMENTAZIONE 230V AC 230V AC POWER SUPPLY KIT 410,00

802673 GUANTI PROFESSIONALI SALDATURA PROFESSIONAL WELDING GLOVES 10,00

802779 JAGUAR MASCHERA MMA-MIG/MAG-TIG JAGUAR MMA-MIG/MAG-TIG HELMET 84,00

802837 TRIBE MASCHERA MMA-MIG/MAG-TIG TRIBE MMA-MIG/MAG-TIG HELMET 48,00

802813 STREAM MASCHERA MMA-MIG/MAG-TIG STREAM MMA-MIG/MAG-TIG HELMET 64,00

802812 TIGER XL MASCHERA MMA-MIG/MAG-TIG TIGER XL MMA-MIG/MAG-TIG HELMET 19,00

TOTAL

MOTOINVERTER

Motosaldatrici a benzina (mod. 174: motore HONDA GX200 4 tempi, mod. 204: motore HONDA GX270) a tecnologia inverter con alternatore ad alta frequenza a magneti permanenti per la saldatura ad elettrodo MMA e TIG-DC con innesco a striscio. Flessibilità di impiego con i più svariati tipi di elettrodi: rutili, basici, cellulosici, inox, ghisa, ecc. Possono essere utilizzate inoltre come generatore in corrente continua (DC) per alimentare elettroutensili quali trapani, smerigliatrici, ecc. Solo motogeneratore, accessori di saldatura e kit ruote disponibili a richiesta.

Inverter technology, petrol, engine-driven welding machines ( mod. 174: 4 strokes, HONDA GX200 engine, mod. 204: 4 strokes, HONDA GX270) with high frequency permanent magnet alternator for MMA and TIG-DC welding with scratch striking. Flexibility of use with a wide range of electrodes: rutile, basic, cellulosic, stainless steel, cast iron etc. They can also be used as a direct current (DC) generators for powering electrical tools such as drills, sanders etc. Motorgenerator only, welding accessories and wheels kit available on request.

MOTOINVERTER 174 CE cod. 815791


Potenza Motor power 4,8 (6,5) kW(Hp) 6,6 (9) kW(Hp) Cilindrata motore Size 196 cm3 270 cm3

Capacità serbatoio / Consumo Tank Capacity / Fuel consumption 3,6 l /313 g/kWh 6 I /313kWh

Tensione / Potenza in DC DC Voltage / Power 230V 1ph / 1,8 kW 230V 1ph / 2,2 kW

Campo di regolazione Current Range 5÷160 A 5÷190 A Corrente in uscita Output current 130 A @ 30% 160 A @ 35%

90 A @ 60% 115 A @ 60%

MOTOINVERTER 174 CE

MOTOINVERTER 174 CE MOTOINVERTER 204 CE

MOTOINVERTER 204 CEHONDAHONDA

OPTIONAL WHEELS KITOPTION

MOD.174

MOD.174

MOD.204

MOD.204

MOD.204

MOTOINVERTER 174 CE MOTOINVERTER 204 CE

CODE DESCRIZIONE DESCRIPTION € Q.TY TOTAL €

KIT SALDATURA / WELDING KITS

ALTRI ACCESSORI / OTHER ACCESSORIES


LOMBARDINIHONDA

MOTOSALDATRICI INVERTER MMA E TIG DCMMA AND TIG DC ENGINE-DRIVEN WELDING MACHINES

Motosaldatrici a benzina, motore HONDA GX390 4 tempi (mod. 254CE)/ a diesel, motore LOMBARDINI a iniezione diretta (mod. 264D CE), a tecnologia inverter con alternatore ad alta frequenza a magneti permanenti per la saldatura ad elettrodo MMA e TIG-DC con innesco a striscio. Flessibilità di impiego con i più svariati tipi di elettrodi: rutili, basici, cellulosici, inox, ghisa, ecc. Possono essere utilizzate inoltre come generatori in corrente continua (DC) e corrente alternata (AC con kit optional) per alimentare elettro-utensili quali trapani, smerigliatrici, ecc. Solo motogeneratore, accessori di saldatura e kit ruote disponibili a richiesta.

Inverter technology, petrol engine-driven welding machines, 4 strokes, HONDA GX390 engine (mod. 254CE)/ diesel, engine-driven welding machine, LOMBARDINI engine with direct injection (mod. 264D CE), with high frequency permanent magnet alternator for MMA and TIG-DC welding with scratch striking. Flexibility of use with a wide range of electrodes: rutile, basic, cellulosic, stainless steel, cast iron, etc. They can also be used as a direct current (DC) and alternate current (AC with optional kit) generators for powering electrical tools such as drills, sanders etc. Motorgenerator only, welding accessories and wheels kit available on request.


MOTOINVERTER 264D CE cod. 815980

MOTOINVERTER 254 CE - 264D CEMOTOINVERTER

Potenza / Cilindrata motore Motor power / Size 8,2 (11) kW(Hp) / 389 cm3 8,1 (11) kW(Hp) / 442 cm3

Capacità serbatoio / Consumo Tank Capacity/Fuel consumption 6,1 l /313 g/kWh 5 l /250 g/kWh

Tensione / Potenza in DC DC Voltage / Power 230V 1ph / 3 kW 230V 1ph / 3 kW

Campo di regolazione Current Range 5÷230 A 5÷230 A Corrente in uscita Output current 200 A @ 30% / 130 A @ 60% 200 A @ 30% / 130 A @ 60%


815980 MOTOINVERTER 264D CE 6.810,00

801102 KIT SALDATURA MMA 250 A 25 MMQ 3+2 M DX25 MMA WELDING KIT 250 A 25 MMQ 3+2 M DX25 69,00


OPTIONAL WHEELS KIT

MOTOINVERTER 254 CE

MOTOINVERTER 254 CE MOTOINVERTER 264D CE

MOTOINVERTER 264D CE

MOTOINVERTER 254 CE M

MOTOINVERTER 254 CE MOTOINVERTER 264D CE





802494 KIT ALIMENTAZIONE 230V AC 230V AC POWER SUPPLY KIT 430,00





TOTAL


THUNDER 220 ACMOTOSALDATRICE IN CORRENTE ALTERNATA / CONTINUA ENGINE-DRIVEN WELDING MACHINE IN ALTERNATING/DIRECT CURRENT

825001 THUNDER 220 AC 2.800,00

801102 KIT SALDATURA MMA 250A 25 MMQ 3+2M DX 25 MMA WELDING KIT 250A 25 MMQ 3+2M DX 25 69,00

Motosaldatrice a benzina (motore HONDA GX390 4 tempi) per la saldatura ad elettrodo MMA in corrente alternata AC. Elettrodi utilizzabili:rutili. Può essere utilizzato come generatore di corrente AC monofase per alimentare tutti i tipi di elettroutensili (es. smerigliatrici, trapani, tassellatori, demolitori, etc.), compressori, sistemi di illuminazione al neon e ad incandescenza. Solo generatore, accessori di saldatura e kit ruote disponibili a richiesta.

Petrol engine-driven (4 strokes HONDA GX390 engine) welding machine for MMA electrode welding in AC alternating current. Usable electrodes: rutile. It can be used as an AC single-phase generator and AC single-phase generator for powering electric tools (eg: sanders, drills, dowel hole drills, demolishers), compressors, neon and incandescent lighting systems, etc. Generator only, welding accessories and wheels kit available on request.

cod. 825001

Potenza Motor power 8,2 (11) kW(Hp) Cilindrata motore Size 389 cm3

Capacità serbatoio / Consumo Tank Capacity / Fuel consumption 6,1 l /313 g/kWh

Tensione / Potenza in DC DC Voltage / Power 230V 1ph / 7 kW

Campo di regolazione Current Range 60÷200 A Corrente in uscita Output current 200 A @ 35% - 180 A @ 60%

OPTIONAL WHEELS KIT





802667 GUANTI PROFESSIONALI RINFORZATI PROFESSIONAL REINFORCED GLOVES 13,00




TOTAL

ELECTROMECHANICAL


821064 MASTERMIG 220/2 1.500,00

722119 RIDUTTORE PRESSIONE 2 MANOMETRI GAS REGULATOR 2 MANOMETERS 49,00

802037 KIT SALDATURA ACCIAIO INOX D. 0,8 MM STAINLESS STEEL WELDING KIT D. 0,8 MM 39,00

802766 KIT SALDATURA ALLUMINIO D. 1-1,2 MM ALUMINIUM WELDING KIT D. 1-1,2 MM 73,00

ADATTATORI BOMBOLA: VEDI PAG. 60 GAS ADAPTORS: SEE PAG. 60

802486 ADATTATORE BOBINA 200 MM COIL ADAPTOR 200 MM 14,00

802034 KIT CHIODATURA NAIL WELDING KIT 166,00

802035 KIT RINVENIMENTO PLATE TEMPERING KIT 15,00

980706 KIT SCHEDA CONTROLLO DOPPIO TIMER DOUBLE TIMER CONTROL PCB KIT 95,00

802627 KIT 5 PINZE DI SALDATURA PER AUTOMOTIVE KIT 5 WELDING CLAMPS FOR AUTOMOTIVE 125,00

802586 KIT 6 PINZE PER CARROZZERIA KIT 6 CLAMPS FOR CAR BODY SHOP 70,00




RULLINI: VEDI PAG. 62 FEED ROLLS: SEE PAG. 62TOTAL

SALDATRICE ELETTROMECCANICA MIG-MAGMIG-MAG ELECTROMECHANICAL WELDING MACHINE ELECTROMECHANICAL

MASTERMIG 220/2

Saldatrice a fi lo MIG-MAG/BRAZING. Flessibilità di impiego con diversi tipi di materiali quali acciaio, acciaio inox, acciai ad alta resistenza e alluminio.Completa di torcia 3 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.

MIG-MAG/BRAZING welding machine. Flexibility of use with a wide range of materials such as steel, stainless steel, high strength steels and aluminium.Complete with 3 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 821064

Potenza Assorbita Absorbed power 60%/max 4/6,5 kW

Tensione di rete Mains voltage (50/60 Hz) 230-400V 3ph

Campo di regolazione Current range 20÷220A

Corrente in uscita Output current 200A @ 30% / 140A @ 60%

ELECTROMECHA


TORCE / TORCHES

KIT SALDATURA & RIDUTTORI / WELDING KIT & GAS REGULATORS


742180 MT15 TORCIA MIG 3 M 220 A MT15 MIG TORCH 3 M 220 A 75,00




821065 MASTERMIG 270/2 1.760,00





802035 KIT RINVENIMENTO PLATE TEMPERING KIT 15,00








SALDATRICE ELETTROMECCANICA MIG-MAGMIG-MAG ELECTROMECHANICAL WELDING MACHINE

Saldatrice a fi lo MIG-MAG/BRAZING. Flessibilità di impiego con diversi tipi di materiali quali acciaio, acciaio inox, acciai ad alta resistenza e alluminio.

Completa di torcia 3 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.

MIG-MAG/BRAZING welding machine. Flexibility of use with a wide range of materials such as steel, stainless steel, high strength steels and aluminium. Complete with 3 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 821065

Potenza Assorbita Absorbed power 60%/max 5,5 / 9 kW




ELECTROMECHANICAL

MASTERMIG 270/2


TORCE / TORCHES







Saldatrice a fi lo MIG-MAG/FLUX/BRAZING, con trainafi lo asportabile a 4 rulli. Flessibilità di impiego con diversi tipi di materiali quali acciaio, acciaio inox, acciai ad alta resistenza e alluminio. Completa di torcia 3 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.

MIG-MAG/FLUX/BRAZING welding machine with a 4-roll removable wire feeder. Flexibility of use with a wide range of materials such as steel, stainless steel, high strength steels and aluminium. Complete with 3 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 827003

Potenza Assorbita Absorbed power 60%/max 6 / 11,5 kW




SALDATRICE ELETTROMECCANICA MIG-MAG/FLUXMIG-MAG/FLUX ELECTROMECHANICAL WELDING MACHINE ELECTROMECHANICAL

MASTERMIG 300

827003 MASTERMIG 300 2.300,00


802466 KIT SALDATURA FILO ANIMATO D. 1-1,6 MM FLUX CORED WIRE WELDING KIT D. 1-1,6 MM 60,00




802595 KIT COPRIBOBINA COIL COVER KIT 42,00

802292 KIT RUOTE TRAINAFILO WIRE FEEDER WHEELS KIT 21,00









TORCE & CAVI: NON RAFFREDDATI / TORCHES & CABLES: NOT COOLED

KIT SALDATURA & ADATTATORI GAS/ WELDING KITS & GAS ADAPTORS





802266 KIT CAVI COLLEGAMENTO 50 MMQ 4 M CONNECTING CABLES KIT 50 MMQ 4 M 240,00



Potenza Assorbita Absorbed power 60%/max 10 / 20 kW




SALDATRICE ELETTROMECCANICA MIG-MAG/FLUXMIG-MAG/FLUX ELECTROMECHANICAL WELDING MACHINE

Saldatrice a fi lo MIG-MAG/FLUX/BRAZING, con trainafi lo asportabile a 4 rulli. Flessibilità di impiego con diversi tipi di materiali quali acciaio, acciaio inox, acciai ad alta resistenza e alluminio.


MIG-MAG/FLUX/BRAZING welding machine with a 4-roll removable wire feeder. Flexibility of use with a wide range of materials such as steel, stainless steel, high strength steels and aluminium. Complete with 3 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 827004

ELECTROMECHANICAL

MASTERMIG 400

827004 MASTERMIG 400 2.700,00





























SALDATRICE ELETTROMECCANICA MIG-MAG/FLUXMIG-MAG/FLUX ELECTROMECHANICAL WELDING MACHINE

Saldatrice a fi lo MIG-MAG/FLUX/BRAZING con trainafi lo asportabile a 4 rulli. Flessibilità di impiego con diversi tipi di materiali quali acciaio, acciaio inox, acciai ad alta resistenza e alluminio.

MIG-MAG/FLUX/BRAZING welding machine with a 4-roll removable wire feeder. Flexibility of use with a wide range of materials such as steel, stainless steel, high strength steels and aluminium.

VERSIONE STANDARD / STANDARD VERSION: cod. 827007 Completa di torcia 3 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore

bombola IT. / Complete with 3 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

VERSIONE RAFFREDDATA AD ACQUA / WATER COOLED VERSION (AQUA): cod. 822008 Completa di torcia 3 m raffreddata ad acqua, cavo e pinza di massa, gruppo raffreddamento

ad acqua, riduttore di pressione 2 manometri, adattatore bombola IT. / Complete with 3 m water cooled torch, work clamp and cable, water cooling unit, 2-manometer gas regulator, IT gas bottle adaptor.

ELECTROMECHANICAL

MASTERMIG 500 (AQUA)

827007 MASTERMIG 500 3.300,00

822008 MASTERMIG 500 AQUA 4.500,00

722625 MT500 TORCIA MIG 3 M 500 A AQUA MT500 MIG TORCH 3 M 500 A AQUA 254,00

722683 MT500 TORCIA MIG 5 M 500 A AQUA MT500 MIG TORCH 5 M 500 A AQUA 310,00

802043 GRUPPO RAFFREDDAMENTO ACQUA GRA 90 230V WATER COOLING UNIT GRA 90 230V 640,00

722346 RIDUTTORE DI PRESSIONE 2 MANOMETRI GAS REGULATOR 2 MANOMETERS 84,00

802466 KIT SALDATURA FILO ANIMATO D.1-1,6 FLUX CORED WIRE WELDING KIT D. 1-1,6 MM 60,00

802273 KIT SALDATURA ALLUMINIO D.1-1,6 ALUMINIUM WELDING KIT D. 1-1,6 MM 145,00









802807 JAGUAR FIRE MASCHERA MMA-MIG/MAG-TIG JAGUAR FIRE MMA-MIG/MAG-TIG HELMET 100,00


RULLINI: VEDI PAG. 63/64 FEED ROLLS: SEE PAG. 63/64TOTAL

AQUA



TORCE/GRA: RAFFREDDATI AD ACQUA / TORCHES/GRA: WATER COOLED









Saldatrice a fi lo MIG-MAG/FLUX/BRAZING con trainafi lo separato a 4 rulli. Flessibilità di impiego con diversi tipi di materiali quali acciaio, acciaio inox, alluminio e leghe.


MIG-MAG/FLUX/BRAZING welding machine with a 4-roll separate wire feeder. Flexibility of use with a wide range of materials such as steel, stainless steel, aluminium and its alloys.

Complete with 3 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 822043






SUPERMIG 380

822043 SUPERMIG 380 2.800,00







802290 KIT BRACCIO MOBILE PORTA TORCIA TORCH HOLDER ADJUSTABLE ARM KIT 240,00



















Saldatrice a fi lo MIG-MAG/FLUX/BRAZING con trainafi lo separato a 4 rulli. Flessibilità di impiego con diversi tipi di materiali quali acciaio, acciaio inox, alluminio.

MIG-MAG/FLUX/BRAZING welding machine with a 4-roll separate wire feeder. Flexibility of use with a wide range of materials such as: steel, stainless steel and aluminium.

VERSIONE STANDARD / STANDARD VERSION: Completa di torcia 3 m, cavo e pinza di massa, riduttore di pressione 2 manometri,

adattatore bombola IT. / Complete with 3 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

SUPERMIG 480 cod. 822044 SUPERMIG 580 cod. 822045

VERSIONE RAFFREDDATA AD ACQUA / WATER COOLED VERSION (AQUA): Completa di torcia 3 m raffreddata ad acqua, cavo e pinza di massa, gruppo raffreddamento

ad acqua, riduttore di pressione 2 manometri, adattatore bombola IT. / Complete with 3 m water cooled torch, work clamp and cable, water cooling unit, 2-manometer gas regulator, IT gas bottle adaptor.

SUPERMIG 480 AQUA cod. 822046 SUPERMIG 580 AQUA cod. 822047

Potenza Assorbita Absorbed power 60%/max 11 / 19 kW 17 / 27 kW

Tensione di rete Mains voltage (50/60 Hz) 230-400V 3ph 230-400V 3ph

Campo di regolazione Current range 50÷420A 60÷550A

Corrente in uscita Output current 420A@25% / 300A@60% 550A@35%/420A@60%


SUPERMIG 480 - 580 (AQUA)

822044 SUPERMIG 480 4.080,00822046 SUPERMIG 480 AQUA 5.360,00822045 SUPERMIG 580 5.600,00822047 SUPERMIG 580 AQUA 6.900,00

722625 MT500 TORCIA MIG 3 M 500 A AQUA MT500 MIG TORCH 3 M 500 A AQUA 254,00722683 MT500 TORCIA MIG 5 M 500 A AQUA MT500 MIG TORCH 5 M 500 A AQUA 310,00802398 KIT CAVI COLLEGAMENTO 70 MMQ 4 M AQUA CONNECTING CABLES KIT 70 MMQ 4 M AQUA 370,00802399 KIT CAVI COLLEGAMENTO 70 MMQ 10 M AQUA CONNECTING CABLES KIT 70 MMQ 10 M AQUA 660,00802470 KIT CAVI COLLEGAMENTO 95 MMQ 30 M AQUA CONNECTING CABLES KIT 95 MMQ 30 M AQUA 2.300,00802109 GRUPPO RAFFREDDAMENTO ACQUA GRA 2500 230V WATER COOLING UNIT GRA 2500 230V 750,00

722346 RIDUTTORE PRESSIONE 2 MANOMETRI GAS REGULATOR 2 MANOMETERS 84,00802276 KIT SALDATURA FILO ANIMATO D. 1-2,4 MM FLUX CORED WIRE WELDING KIT D. 1-2,4 MM 114,00802273 KIT SALDATURA ALLUMINIO D. 1-1,6 MM (SUPERMIG 480) ALUMINIUM WELDING KIT D. 1-1,6 MM 145,00802409 KIT SALDATURA ALLUMINIO D. 1-1,6 MM (SUPERMIG 580) ALUMINIUM WELDING KIT D. 1-1,6 MM 186,00


802486 ADATTATORE BOBINA 200 MM COIL ADAPTOR 200 MM 14,00802598 KIT AMPEROMETRO-VOLTMETRO DIGITALE DIGITAL AMPERMETER-VOLTMETER KIT 90,00802595 KIT COPRIBOBINA COIL COVER KIT 42,00802290 KIT BRACCIO MOBILE PORTA TORCIA TORCH HOLDER ADJUSTABLE ARM KIT 240,00802292 KIT RUOTE TRAINAFILO WIRE FEEDER WHEELS KIT 21,00802673 GUANTI PROFESSIONALI SALDATURA PROFESSIONAL WELDING GLOVES 10,00802779 JAGUAR MASCHERA MMA-MIG/MAG-TIG JAGUAR MMA-MIG/MAG-TIG HELMET 84,00802936 VANTAGE RED XL MASCHERA MMA-MIG/MAG-TIG VANTAGE RED XL MMA-MIG/MAG-TIG HELMET 124,00


AQUA



TORCE, CAVI, GRA: RAFFREDDATI AD ACQUA / TORCHES, CABLES, GRA: WATER COOLED



742186 MT36 TORCIA MIG 3 M 400 A (SUPERMIG 480) MT36 MIG TORCH 3 M 400 A 160,00742187 MT36 TORCIA MIG 4 M 400 A (SUPERMIG 480) MT36 MIG TORCH 4 M 400 A 188,00742188 MT36 TORCIA MIG 5 M 400 A (SUPERMIG 480) MT36 MIG TORCH 5 M 400 A 228,00722798 MT40 TORCIA MIG 3 M 500 A (SUPERMIG 580) MT40 MIG TORCH 3 M 500 A 270,00722800 MT40 TORCIA MIG 5 M 500 A (SUPERMIG 580) MT40 MIG TORCH 5 M 500 A 390,00802348 KIT CAVI COLLEGAMENTO 70 MMQ 4 M CONNECTING CABLES KIT 70 MMQ 4 M 300,00802349 KIT CAVI COLLEGAMENTO 70 MMQ 10 M CONNECTING CABLES KIT 70 MMQ 10 M 590,00

SUPERMIG 480 SUPERMIG 580


TECHNOMIG 150 DUAL SYNERGIC

KIT GAS & KIT SALDATURA / GAS KITS & WELDING KITS


Saldatrice inverter a fi lo MIG-MAG/FLUX/BRAZING controllata a microprocessore. La rapida regolazione Sinergica dei parametri di saldatura (basta infatti impostare lo spessore del materiale e iniziare a saldare) rende il prodotto molto semplice da usare. Grande fl essibilità di utilizzo con diversi materiali saldati (acciaio, acciaio inox, alluminio) o saldobrasati (lamiere galvanizzate). Predisposta per la saldatura NO GAS/Flux, trasformabile in MIG-MAG con il kit optional. Completa di torcia, cavo e pinza di massa.

Microprocessor controlled, MIG-MAG/FLUX/BRAZING inverter wire welding machine. The fast Synergic regulation of the welding parameters (just set the material thickness and start welding) makes the product very easy to use. Great fl exibility of use thanks to the different materials it can weld (steel, stainless steel, aluminium) or braze weld (galvanized sheet). Fit for NO GAS/Flux welding, it can be transformed into MIG-MAG with the optional kit. Complete with torch, work clamp and cable.

cod. 816050

Potenza Assorbita Absorbed power 60%/max 1,2 / 2,8 kW

Tensione di rete Mains voltage (50/60 Hz) 230V 1ph



SALDATRICE AD INVERTER MIG-MAG/FLUXMIG-MAG/FLUX INVERTER WELDING MACHINE INVERTER

802032 KIT ATTACCO BOMBOLA A PERDERE CONNECTION KIT FOR THROWAWAY BOTTLE 33,00

802708 KIT ATTACCO BOMBOLA RICARICABILE CONNECTION KIT FOR REFILLABLE BOTTLE 52,00

802147 KIT SALDATURA ACCIAIO BOMBOLA A PERDERE STEEL WELDING KIT THROWAWAY BOTTLE 53,00

802148 KIT SALDATURA ACCIAIO BOMBOLA RICARICABILE STEEL WELDING KIT FOR REFILLABLE BOTTLE 72,00


802036 KIT SALDATURA ALLUMINIO D. 0,8 MM ALUMINIUM WELDING KIT D. 0,8 MM 50,00


803059 CARRELLO - ARCTIC TROLLEY - ARCTIC 196,00

803074 CARRELLO - AMERICA TROLLEY - AMERICA 120,00






MIG-MAGFLUX

&

816050 TECHNOMIG 150 DUAL SYNERGIC 612,00





816054 TECHNOMIG 180 DUAL SYNERGIC EURO 790,00







RULLINI: VEDI PAG. 61, 62 FEED ROLLS: SEE PAG. 61, 62 TOTAL


TORCE, KIT GAS & KIT SALDATURA / TORCHES, GAS KITS & WELDING KITS



742181 MT15 TORCIA MIG 4 M 220 A MT15 TORCH MIG 4 M 220 A 90,00


802708 KIT ATTACCO BOMBOLA RICARICABILE CONNECTION KIT FOR REFILLABLE BOTTLE 52,00

802147 KIT SALDATURA ACCIAIO BOMBOLA A PERDERE STEEL WELDING KIT THROWAWAY BOTTLE 53,00

802148 KIT SALDATURA ACCIAIO BOMBOLA RICARICABILE STEEL WELDING KIT FOR REFILLABLE BOTTLE 72,00


802036 KIT SALDATURA ALLUMINIO D. 0,8 MM ALUMINIUM WELDING KIT D. 0,8 MM 50,00

802115 KIT SALDATURA ALLUMINIO D. 0,8-1 MM ALUMINIUM WELDING KIT D. 0,8-1 MM 94,00


Saldatrice inverter a fi lo MIG-MAG/FLUX/BRAZING controllata a microprocessore. La rapida regolazione Sinergica dei parametri di saldatura (basta infatti impostare lo spessore del materiale e iniziare a saldare) rende il prodotto molto semplice da usare. Grande fl essibilità di utilizzo con diversi materiali saldati (acciaio, acciaio inox, alluminio) o saldobrasati (lamiere galvanizzate). Predisposta per la saldatura NO GAS/Flux, trasformabile in MIG-MAG con il kit optional. Completa di torcia, cavo e pinza di massa.

Microprocessor controlled, MIG-MAG/FLUX/BRAZING inverter wire welding machine. The fast Synergic regulation of the welding parameters (just set the material thickness and start welding) makes the product very easy to use. Great fl exibility of use thanks to the different materials it can weld (steel, stainless steel, aluminium) or braze weld (galvanized sheet). Fit for NO GAS/Flux welding, it can be transformed into MIG-MAG with the optional kit. Complete with torch, work clamp and cable.

TECHNOMIG 180 DUAL SYNERGIC cod. 816051

TECHNOMIG 180 DUAL SYNERGIC EURO cod. 816054






MIG-MAGFLUX

&










RULLINI: VEDI PAG. 62 FEED ROLLS: SEE PAG. 62 TOTAL





742181 MT15 TORCIA MIG 4 M 220 A MT15 TORCH MIG 4 M 220 A 90,00





Saldatrice inverter a fi lo MIG-MAG/FLUX/BRAZING controllata a microprocessore. La rapida regolazione Sinergica dei parametri di saldatura (tecnologia ONE TOUCH LCD SYNERGY) rende il prodotto molto semplice da usare. Grande fl essibilità di utilizzo con diversi materiali saldati (acciaio, acciaio inox, alluminio) o saldobrasati (lamiere galvanizzate). Completa di torcia 3 m, cavo e pinza di massa.

Microprocessor controlled, MIG-MAG/FLUX/BRAZING inverter wire welding machine. The fast Synergic regulation of the welding parameters (ONE TOUCH LCD SYNERGY technology) makes the product very easy to use. Great fl exibility of use thanks to the different materials it can weld (steel, stainless steel, aluminium) or braze weld (galvanized sheet). Complete with 3 m torch, work clamp and cable.

cod. 816052






MIG-MAGFLUX

&



Saldatrice inverter a fi lo multiprocesso MIG-MAG/FLUX/BRAZING/MMA/TIG-DC controllata a microprocessore. La rapida regolazione Sinergica dei parametri di saldatura (tecnologia ONE TOUCH LCD SYNERGY) rende il prodotto molto semplice da usare. Grande fl essibilità di utilizzo con diversi materiali saldati (acciaio, acciaio inox, alluminio) o saldobrasati (lamiere galvanizzate). Completa di torcia 3 m, cavo e pinza di massa.

Microprocessor controlled, MIG-MAG/FLUX/BRAZING/MMA/TIG-DC inverter multiprocess welding machine. The fast Synergic regulation of the welding parameters (ONE TOUCH LCD SYNERGY technology) makes the product very easy to use. Great fl exibility of use thanks to the different materials it can weld (steel, stainless steel, aluminium) or braze weld (galvanized sheet). Complete with 3 m torch, work clamp and cable.

cod. 816053

SALDATRICE AD INVERTER MIG-MAG/FLUX/MMA/ TIGMIG-MAG/FLUX/MMA/TIG INVERTER WELDING MACHINE INVERTER





816053 TECHNOMIG 215 DUAL SYNERGIC 1.150,00

803073 CARRELLO - EUROPA TROLLEY - EUROPA 200,00

803076 CARRELLO - NATIONAL TROLLEY - NATIONAL 360,00




802816 STREAM FLAME MASCHERA MMA-MIG/MAG-TIG STREAM FLAME MMA-MIG/MAG-TIG HELMET 73,00


MIG-MAGFLUX

&

TIG LIFTMULTIPROCESS

MIG - MMA - TIG







722563 ST9V TORCIA TIG 4 M 150 A ST9V TIG TORCH 4 M 150 A 94,00




713281 PINZA PORTAELETTRODO CAVO 16MMQ 3M DX25 ELECTRODE HOLDER CABLE 16MMQ 3M DX25 25,00



TECHNOMIG 223 TREO SYNERGIC

816058 TECHNOMIG 223 TREO SYNERGIC 2.250,00

816120 TECHNOMIG 223 TREO SYNERGIC + SPOOL GUN M6 2.754,00


802836 KIT SALDATURA ALLUMINIO D. 0,8 - 1 MM ALUMINIUM WELDING KIT D. 0,8 - 1 MM 108,00





803067 KIT SUPPORTO DOPPIA BOMBOLA TWO GASBOTTLE HOLDER KIT 140,00







Potenza Assorbita Absorbed power 60%/max 2,2 / 5kW





TORCE / TORCHES



802407 M6 SPOOL GUN M6 SPOOL GUN 440,00






Saldatrice inverter multiprocesso MIG-MAG/FLUX/BRAZING/MMA/ TIG DC-Lift controllata a microprocessore. E’ particolarmente indicata in carrozzeria e permette l’utilizzo immediato di tre diverse torce, due mig tradizionali ed una spool gun.

Microprocessor controlled MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift inverter multiprocess welding machine. It is particularly suitable for use in body shops and allows the immediate use of three different torch types: two traditional mig torches and one spool gun.

TECHNOMIG 223 TREO SYNERGIC cod. 816058

Completa di 2 torce MIG-MAG 3 m, cavo e pinza di massa. Complete with two, 3m MIG-MAG torches, work clamp and cable.

TECHNOMIG 223 TREO SYNERGIC + SPOOL GUN M6 cod. 816120 Completa di 2 torce MIG-MAG 3 m, SPOOL GUN, cavo e pinza di massa. Com plete with two, 3 m MIG-MAG torches, SPOOL GUN, work clamp and cable.

SALDATRICE AD INVERTER MIG-MAG/FLUX/MMA/ TIGMIG-MAG/FLUX/MMA/TIG INVERTER WELDING MACHINE INVERTER

TIG LIFT

MULTIPROCESSMIG - MMA - TIG

TECHNOMIG 223 TREO SYNERGIC + SPOOL GUN M6


Saldatrice inverter a fi lo multiprocesso MIG-MAG/PULSATO/FLUX/BRAZING/MMA/TIG-DC LIFT controllata a microprocessore. Il funzionamento SINERGICO assicura la rapida e facile impostazione dei programmi garantendo sempre un elevato controllo dell’arco e della qualità di saldatura. Particolarmente indicata per la saldatura di alluminio, lamiere zincate, acciai ad alta resistenza e acciaio inox.


Microprocessor controlled, MIG-MAG/PULSE/FLUX/BRAZING/ MMA/TIG-DC LIFT inverter multiprocess welding machine. The SYNERGIC function allows for a rapid and easy setting of the welding programmes and grants always a high control both of the arc and of the quality of the welding. Particularly suitable for welding aluminium, galvanised sheets, high strength steels, stainless steel. Complete with 3 m torch, work clamp and cable, 2-manometer gas regulator,IT gas bottle adaptor.

cod. 852026

SALDATRICE AD INVERTER MIG-MAG/FLUX/MMA/TIGMIG-MAG/FLUX/MMA/TIG INVERTER WELDING MACHINE INVERTER

TECHNOMIG 225 PULSE MIG-TIG-MMA

852026 TECHNOMIG 225 PULSE 2.960,00


802067 KIT ATTACCO BOMBOLA INDUSTRIALE INDUSTRIAL TYPE BOTTLE CONNECTION KIT 8,40




803051 CARRELLO TROLLEY 280,00

802479 KIT ADATTATORE BOBINA 15 KG COIL ADAPTOR KIT 15 KG 130,00

802219 COMANDO A DISTANZA MANUALE 1 POT. 1 POT. MANUAL REMOTE CONTROL 150,00






ActiveSynergy







TORCE NON RAFFREDDATE / NOT COOLED TORCHES









ELECTROMIG 220 SYNERGIC

816059 ELECTROMIG 220 SYNERGIC 1.740,00






803076 CARRELLO - NATIONAL TROLLEY - NATIONAL 360,00


















SALDATRICE AD INVERTER MIG-MAG/FLUX/MMA/TIGMIG-MAG/FLUX/MMA/TIG INVERTER WELDING MACHINE INVERTER

Saldatrice inverter a fi lo multiprocesso MIG-MAG/FLUX/BRAZING/MMA/TIG-DC controllata a microprocessore. La rapida regolazione Sinergica dei parametri di saldatura (tecnologia ONE TOUCH LCD SYNERGY) rende il prodotto molto semplice da usare. Grande fl essibilità di utilizzo con diversi materiali saldati (acciaio, acciaio inox, alluminio) o saldobrasati (lamiere galvanizzate). Completa di torcia 3 m, cavo e pinza di massa.

Microprocessor controlled, MIG-MAG/FLUX/BRAZING/MMA/TIG-DC inverter multiprocess welding machine. The fast Synergic regulation of the welding parameters (ONE TOUCH LCD SYNERGY technology) makes the product very easy to use. Great fl exibility of use thanks to the different materials it can weld (steel, stainless steel, aluminium) or braze weld (galvanized sheet). Complete with 3 m torch, work clamp and cable.

cod. 816059

TIG LIFT


MIG-MAGFLUX

&


ELECTROMIG 230 WAVE

Saldatrice inverter multiprocesso, con funzionamento continuo e pulsato, MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift controllata a microprocessore. Il sistema WAVE OS rende le operazioni di saldatura: personalizzabili in base all’esigenza dell’utilizzatore; tracciabili ed analizzabili, attraverso il salvataggio dei dati via USB; semplifi cate, grazie alla regolazione SINERGICA dei parametri.

Completa di torcia 3 m MIG-MAG, cavo e pinza di massa.

Microprocessor controlled, MIG-MAG (continuous, PULSE)/FLUX/BRAZING/MMA and TIG DC-Lift inverter welding machine. The WAVE OS system makes welding operations: customisable to suit customer-specifi c requirements; traceable and analysable, by saving data via USB; simplifi ed, thanks to SYNERGIC adjustment of parameters. Complete with 3 m MIG-MAG torch, work clamp and cable.

cod. 816060

816060 ELECTROMIG 230 WAVE 2.430,00






980559 KIT SCHEDA PUSH PULL PUSH PULL BOARD KIT 90,00
















ActiveSynergyTIG LIFT

SALDATRICE INVERTER MIG-MAG/FLUX/MMA/TIGMIG-MAG/FLUX/MMA/TIG INVERTER WELDING MACHINE INVERTER


ELECTROMIG 330 WAVE




Corrente in uscita Output current 300A @ 30% /210A @ 60%


Saldatrice inverter multiprocesso, con funzionamento continuo e pulsato, MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift controllata a microprocessore. Il sistema WAVE OS rende le operazioni di saldatura: personalizzabili in base all’esigenza dell’utilizzatore; tracciabili ed analizzabili, attraverso il salvataggio dei dati via USB; semplifi cate, grazie alla regolazione SINERGICA dei parametri.

Completa di torcia 3 m MIG-MAG, cavo e pinza di massa.

Microprocessor controlled, MIG-MAG (continuous, PULSE)/FLUX/BRAZING/MMA and TIG DC-Lift inverter welding machine. The WAVE OS system makes welding operations: customisable to suit customer-specifi c requirements; traceable and analysable, by saving data via USB; simplifi ed, thanks to SYNERGIC adjustment of parameters. Complete with 3 m MIG-MAG torch, work clamp and cable.

cod. 816061

816061 ELECTROMIG 330 WAVE INFO 2016






980559 KIT SCHEDA PUSH PULL PUSH PULL BOARD KIT 90,00



802936 VANTAGE RED XL MASCHERA MMA-MIG/MAG-TIG VANTAGE RED XL MMA-MIG/MAG-TIG HELMET 124,00









ActiveSynergyTIG LIFT

SALDATRICE INVERTER MIG-MAG/FLUX/MMA/TIGMIG-MAG/FLUX/MMA/TIG INVERTER WELDING MACHINE INVERTER


SUPERIOR 400 CE VRD - MIG PACK (AQUA)

816041 SUPERIOR 400 CE VRD MIG PACK 4.200,00816042 SUPERIOR 400 CE VRD MIG PACK AQUA 5.360,00

722625 MT500 TORCIA MIG 3 M 500 A AQUA MT500 MIG TORCH 3 M 500 A AQUA 254,00722683 MT500 TORCIA MIG 5 M 500 A AQUA MT500 MIG TORCH 5 M 500 A AQUA 310,00802398 KIT CAVI COLLEGAMENTO 70 MMQ 4 M AQUA CONNECTING CABLES KIT 70 MMQ 4 M AQUA 370,00802399 KIT CAVI COLLEGAMENTO 70 MMQ 10 M AQUA CONNECTING CABLES KIT 70 MMQ 10 M AQUA 660,00802470 KIT CAVI COLLEGAMENTO 95 MMQ 30 M AQUA CONNECTING CABLES KIT 95 MMQ 30 M AQUA 2.300,00

803076 CARRELLO - NATIONAL TROLLEY - NATIONAL 360,00802640 GRUPPO RAFFREDDAMENTO ACQUA GRA 4000 230V WATER COOLING UNIT GRA 4000 230V 820,00

Potenza Assorbita Absorbed power 60%/max 8/14 kW(400V) - 5/8 kW(230V)

Tensione di rete Mains voltage (50/60 Hz) 230÷400V 3ph

Campo di regolazione Current range 10÷350A (400V) - 10÷300A (230V)

Corrente in uscita Output current 330A @ 35%(400V)/ 250A @ 35% (230V)


TORCE & CAVI: NON RAFFREDDATI/ TORCHES & CABLES: NOT COOLED

TORCE & CAVI: RAFFREDDATI AD ACQUA/ TORCHES & CABLES: WATER COOLED

CARRELLI & GRUPPO DI RAFFREDDAMENTO / TROLLEYS & WATER COOLING UNIT

742186 MT36 TORCIA MIG 3 M 400 A MT36 MIG TORCH 3 M 400 A 160,00742187 MT36 TORCIA MIG 4 M 400 A MT36 MIG TORCH 4 M 400 A 188,00742188 MT36 TORCIA MIG 5 M 400 A MT36 MIG TORCH 5 M 400 A 228,00802472 KIT CAVI COLLEGAMENTO 50 MMQ 4 M CONNECTING CABLES KIT 50 MMQ 4 M 270,00802473 KIT CAVI COLLEGAMENTO 50 MMQ 10 M CONNECTING CABLES KIT 50 MMQ 10 M 500,00

722119 RIDUTTORE PRESSIONE 2 MANOMETRI GAS REGULATOR 2 MANOMETERS 49,00802273 KIT SALDATURA ALLUMINIO D. 1-1,6 MM ALUMINIUM WELDING KIT D. 1-1,6 MM 145,00802409 KIT SALDATURA ALLUMINIO D. 1-1,6 MM (AQUA) ALUMINIUM WELDING KIT D. 1-1,6 MM (AQUA) 186,00802466 KIT SALDATURA FILO ANIMATO D. 1-1,6 MM FLUX CORED WIRE WELDING KIT D. 1-1,6 MM 60,00802276 KIT SALDATURA FILO ANIMATO D. 1-2,4 MM (AQUA) FLUX CORED WIRE WELDING KIT D. 1-2,4 MM (AQUA) 114,00802666 KIT SCRICCATURA GOUGING KIT 220,00713282 PINZA PORTAELETTRODO CAVO 25MMQ 4M DX50 ELECTRODE HOLDER CABLE 25MMQ 4M DX50 40,00


KIT SALDATURA & RIDUTTORI / WELDING KITS & GAS REGULATORS


802595 KIT COPRIBOBINA COIL COVER KIT 42,00802486 ADATTATORE BOBINA 200 MM COIL ADAPTOR 200 MM 14,00980604 KIT CAVO ALIMENTAZIONE GRA GRA MAINS CABLE KIT 35,00802673 GUANTI PROFESSIONALI SALDATURA PROFESSIONAL WELDING GLOVES 10,00802936 VANTAGE RED XL MASCHERA MMA-MIG/MAG-TIG VANTAGE RED XL MMA-MIG/MAG-TIG HELMET 124,00


AQUA


Generatore inverter multiprocesso MIG-MAG/FLUX/MMA/TIG ad alta potenza adatto ad utilizzi gravosi in cantieri ed ambienti industriali. Salda in MIG-MAG tutti i tipi di acciai e derivati ed in MMA tutti i tipi di elettrodi fi no ad un diametro di 6mm.

High power MIG-MAG/FLUX/MMA/TIG multi-process inverter generator suitable for heavy duty use on worksites and industrial environments. MIG-MAG welding of all types of steels and steel by-products and MMA welding of all types of electrodes up to 6mm.

VERSIONE STANDARD / STANDARD VERSION: cod. 816041 Completo di trainafi lo, accessori di saldatura MIG-MAG e carrello. / Complete with wirefeeder,

MIG-MAG welding accessories and trolley.

VERSIONE RAFFREDDATA AD ACQUA / WATER COOLED VERSION (AQUA): cod. 816042 Completo di trainafi lo, accessori di saldatura MIG-MAG, carrello e gruppo raffreddamento ad

acqua G.R.A. 4000. / Complete with wirefeeder, MIG-MAG welding accessories, trolley and water cooling unit G.R.A. 4000.

GENERATORE INVERTER MIG-MAG/FLUX/MMA/TIGMIG-MAG/FLUX/MMA/TIG INVERTER GENERATOR INVERTER


SUPERIOR 630 CE VRD - MIG PACK (AQUA)

816043 SUPERIOR 630 CE VRD MIG PACK 5.760,00816044 SUPERIOR 630 CE VRD MIG PACK AQUA 6.900,00

722625 MT500 TORCIA MIG 3 M 500 A AQUA MT500 MIG TORCH 3 M 500 A AQUA 254,00722683 MT500 TORCIA MIG 5 M 500 A AQUA MT500 MIG TORCH 5 M 500 A AQUA 310,00802398 KIT CAVI COLLEGAMENTO 70 MMQ 4 M AQUA CONNECTING CABLES KIT 70 MMQ 4 M AQUA 370,00802399 KIT CAVI COLLEGAMENTO 70 MMQ 10 M AQUA CONNECTING CABLES KIT 70 MMQ 10 M AQUA 660,00802470 KIT CAVI COLLEGAMENTO 95 MMQ 30 M AQUA CONNECTING CABLES KIT 95 MMQ 30 M AQUA 2.300,00

803076 CARRELLO - NATIONAL TROLLEY - NATIONAL 360,00802497 GRUPPO RAFFREDDAMENTO ACQUA GRA 3000 230V WATER COOLING UNIT GRA 3000 230V 970,00

Potenza Assorbita Absorbed power 60%/max 13/23 kW(400V) - 10/16 kW(230V)

Tensione di rete Mains voltage (50/60 Hz) 230÷400V 3ph

Campo di regolazione Current range 10÷600A (400V) - 10÷450A (230V)

Corrente in uscita Output current 500A @ 35%(400V)/ 400A @ 35% (230V)




CARRELLI & GRUPPO DI RAFFREDDAMENTO / TROLLEYS & WATER COOLING UNIT

722798 MT40 TORCIA MIG 3 M 500 A MT40 MIG TORCH 3 M 500 A 270,00722800 MT40 TORCIA MIG 5 M 500 A MT40 MIG TORCH 5 M 500 A 390,00802348 KIT CAVI COLLEGAMENTO 70 MMQ 4 M CONNECTING CABLES KIT 70 MMQ 4 M 300,00802349 KIT CAVI COLLEGAMENTO 70 MMQ 10 M CONNECTING CABLES KIT 70 MMQ 10 M 590,00

722119 RIDUTTORE PRESSIONE 2 MANOMETRI GAS REGULATOR 2 MANOMETERS 49,00802409 KIT SALDATURA ALLUMINIO D. 1-1,6 MM ALUMINIUM WELDING KIT D. 1-1,6 MM 186,00802276 KIT SALDATURA FILO ANIMATO D. 1-2,4 MM (AQUA) FLUX CORED WIRE WELDING KIT D. 1-2,4 MM (AQUA) 114,00802666 KIT SCRICCATURA GOUGING KIT 220,00713282 PINZA PORTAELETTRODO CAVO 25MMQ 4M DX50 ELECTRODE HOLDER CABLE 25MMQ 4M DX50 40,00




802595 KIT COPRIBOBINA COIL COVER KIT 42,00802486 ADATTATORE BOBINA 200 MM COIL ADAPTOR 200 MM 14,00980604 KIT CAVO ALIMENTAZIONE GRA GRA MAINS CABLE KIT 35,00802673 GUANTI PROFESSIONALI SALDATURA PROFESSIONAL WELDING GLOVES 10,00802936 VANTAGE RED XL MASCHERA MMA-MIG/MAG-TIG VANTAGE RED XL MMA-MIG/MAG-TIG HELMET 124,00


AQUA


Generatore inverter multiprocesso MIG-MAG/FLUX/MMA/TIG ad alta potenza adatto ad utilizzi gravosi in cantieri ed ambienti industriali. Salda in MIG-MAG tutti i tipi di acciai e derivati ed in MMA tutti i tipi di elettrodi fi no ad un diametro di 8mm.

High power MIG-MAG/FLUX/MMA/TIG multi-process inverter generator suitable for heavy duty use on worksites and industrial environments. MIG-MAG welding of all types of steels and steel by-products and MMA welding of all types of electrodes up to 8mm.

VERSIONE STANDARD / STANDARD VERSION: cod. 816043 Completo di trainafi lo, accessori di saldatura MIG-MAG e carrello. / Complete with wirefeeder,

MIG-MAG welding accessories and trolley.

VERSIONE RAFFREDDATA AD ACQUA / WATER COOLED VERSION (AQUA): cod. 816044 Completo di trainafi lo, accessori di saldatura MIG-MAG, carrello e gruppo raffreddamento ad

acqua G.R.A. 3000. / Complete with wirefeeder, MIG-MAG welding accessories, trolley and water cooling unit G.R.A. 3000.

GENERATORE INVERTER MIG-MAG/FLUX/MMA/TIGMIG-MAG/FLUX/MMA/TIG INVERTER GENERATOR INVERTER


WATERCOOLEDVERSION

SALDATRICE INVERTER MIG-MAG/FLUX/MMA/TIGMIG-MAG/FLUX/MMA/TIG INVERTER WELDING MACHINE





Saldatrice inverter a fi lo MIG-MAG (continuo, PULSATO, doppio pulsato - PULSE ON PULSE), FLUX/ BRAZING/MMA/TIG-DC LIFT, controllata a microprocessore, con trainafi lo separato a 4 rulli. Flessibilità di impiego con diversi tipi di materiali quali acciaio, acciaio inox, acciai ad alta resistenza, lamiere zincate, alluminio e leghe. Controllo SINERGICO dei parametri di saldatura.

Microprocessor controlled, MIG-MAG (continuous, PULSE, double pulse - PULSE ON PULSE), FLUX/ BRAZING/MMA/TIG-DC LIFT inverter welding machine with separate 4-roll wire feeder. Flexibility of use with a wide range of materials such as steel, stainless steel, high strength steels, galvanized sheets, aluminium and its alloys. SYNERGIC control of welding parameters.



VERSIONE RAFFREDDATA AD ACQUA / WATER COOLED VERSION (AQUA): cod. 815336 Completa di torcia 3 m raffreddata ad acqua, cavo e pinza di massa, gruppo raffreddamento ad acqua

GRA 3000, riduttore di pressione 2 manometri, adattatore bombola IT, carrello. / Complete with 3 m water cooled torch, work clamp and cable, water cooling unit GRA 3000, 2-manometer gas regulator, IT gas bottle adaptor, trolley.

INVERPULSE 320 (AQUA) MIG-TIG-MMA

INVERTER


815301 INVERPULSE 320 5.100,00815336 INVERPULSE 320 AQUA 6.900,00

803071 CARRELLO - UNIVERSAL TROLLEY - UNIVERSAL 500,00802497 GRUPPO RAFFREDDAMENTO ACQUA GRA 3000 230V WATER COOLING UNIT GRA 3000 230V 970,00803055 KIT SUPPORTO DOPPIA BOMBOLA TWO GASBOTTLE HOLDER KIT 120,00

722346 RIDUTTORE PRESSIONE 2 MANOMETRI GAS REGULATOR 2 MANOMETERS 84,00802596 KIT SALDATURA ALLUMINIO D. 0,8-1,2 MM ALUMINIUM WELDING KIT D. 0,8-1,2 MM 140,00802409 KIT SALDATURA ALLUMINIO D. 1-1,6 MM AQUA ALUMINIUM WELDING KIT D. 1-1,6 MM AQUA 186,00802466 KIT SALDATURA FILO ANIMATO D. 1-1,6 MM FLUX CORED WIRE WELDING KIT D. 1-1,6 MM 60,00713282 PINZA PORTAELETTRODO CAVO 25MMQ 4M DX50 ELECTRODE HOLDER CABLE 25MMQ 4M DX50 40,00



TORCE RAFFREDDATE AD ACQUA / WATER COOLED TORCHES

CARRELLO & GRUPPO RAFFREDDAMENTO / TROLLEY & COOLING UNIT



802219 COMANDO A DISTANZA MANUALE 1 POT. 1 POT. MANUAL REMOTE CONTROL 150,00802336 COMANDO A DISTANZA MANUALE 2 POT. 2 POT. MANUAL REMOTE CONTROL 160,00980559 KIT SCHEDA PUSH PULL PUSH PULL BOARD KIT 90,00980604 KIT CAVO ALIMENTAZIONE GRA GRA MAINS CABLE KIT 35,00802673 GUANTI PROFESSIONALI SALDATURA PROFESSIONAL WELDING GLOVES 10,00802936 VANTAGE RED XL MASCHERA MMA-MIG/MAG-TIG VANTAGE RED XL MMA-MIG/MAG-TIG HELMET 124,00


722625 MT500 TORCIA MIG 3 M 500 A AQUA MT500 MIG TORCH 3 M 500 A AQUA 254,00722683 MT500 TORCIA MIG 5 M 500 A AQUA MT500 MIG TORCH 5 M 500 A AQUA 310,00742570 ST18A TORCIA TIG 4 M 350 A AQUA ST18A TIG TORCH 4 M 350 A AQUA 164,00742462 ST18A TORCIA TIG 4 M 350 A AQUA BLUE LINE ST18A TIG TORCH 4 M 350 A AQUA BLUE LINE 294,00742497 ST18A TORCIA TIG 8 M 350 A AQUA BLUE LINE ST18A TIG TORCH 8 M 350 A AQUA BLUE LINE 380,00

802407 M6 SPOOL GUN M6 SPOOL GUN 440,00742186 MT36 TORCIA MIG 3 M 400 A MT36 MIG TORCH 3 M 400 A 160,00742187 MT36 TORCIA MIG 4 M 400 A MT36 MIG TORCH 4 M 400 A 188,00742188 MT36 TORCIA MIG 5 M 400 A MT36 MIG TORCH 5 M 400 A 228,00742427 ST26 TORCIA TIG 4 M 220 A ST26 TIG TORCH 4 M 220 A 150,00742463 ST26 TORCIA TIG 4 M 220 A BLUE LINE ST26 TIG TORCH 4 M 220 A BLUE LINE 182,00742431 ST26 TORCIA TIG 8 M 220 A ST26 TIG TORCH 8 M 220 A 235,00742464 ST26 TORCIA TIG 8 M 220 A BLUE LINE ST26 TIG TORCH 8 M 220 A BLUE LINE 310,00

WATERCOOLEDVERSION

ActiveSynergy

AQUA





TORCE RAFFREDDATE AD ACQUA / WATER COOLED TORCHES






INVERTER


722625 MT500 TORCIA MIG 3 M 500 A AQUA MT500 MIG TORCH 3 M 500 A AQUA 254,00722683 MT500 TORCIA MIG 5 M 500 A AQUA MT500 MIG TORCH 5 M 500 A AQUA 310,00802398 KIT CAVI COLLEGAMENTO 70 MMQ 4 M AQUA CONNECTING CABLES KIT 70 MMQ 4 M AQUA 370,00802399 KIT CAVI COLLEGAMENTO 70 MMQ 10 M AQUA CONNECTING CABLES KIT 70 MMQ 10 M AQUA 660,00802470 KIT CAVI COLLEGAMENTO 95 MMQ 30 M AQUA CONNECTING CABLES KIT 95 MMQ 30 M AQUA 2.300,00742570 ST18A TORCIA TIG 4 M 350 A AQUA ST18A TIG TORCH 4 M 350 A AQUA 164,00742462 ST18A TORCIA TIG 4 M 350 A AQUA BLUE LINE ST18A TIG TORCH 4 M 350 A AQUA BLUE LINE 294,00742497 ST18A TORCIA TIG 8 M 350 A AQUA BLUE LINE ST18A TIG TORCH 8 M 350 A AQUA BLUE LINE 380,00

803071 CARRELLO - UNIVERSAL TROLLEY - UNIVERSAL 500,00802497 GRUPPO RAFFREDDAMENTO ACQUA GRA 3000 230V WATER COOLING UNIT GRA 3000 230V 970,00803055 KIT SUPPORTO DOPPIA BOMBOLA TWO GASBOTTLE HOLDER KIT 120,00

722346 RIDUTTORE PRESSIONE 2 MANOMETRI GAS REGULATOR 2 MANOMETERS 84,00802409 KIT SALDATURA ALLUMINIO D. 1-1,6 MM (AQUA) ALUMINIUM WELDING KIT D. 1-1,6 MM (AQUA) 186,00802276 KIT SALDATURA FILO ANIMATO D. 1-2,4 MM FLUX CORED WIRE WELDING KIT D. 1-2,4 MM 114,00713282 PINZA PORTAELETTRODO CAVO 25MMQ 4M DX50 ELECTRODE HOLDER CABLE 25MMQ 4M DX50 40,00






Saldatrice inverter a fi lo MIG-MAG (continuo, PULSATO, doppio pulsato - PULSE ON PULSE), FLUX/ BRAZING/MMA/TIG-DC LIFT, controllata a microprocessore, con trainafi lo separato a 4 rulli. Flessibilità di impiego con diversi tipi di materiali quali acciaio, acciaio inox, acciai ad alta resistenza, lamiere zincate, alluminio e leghe. Controllo SINERGICO dei parametri di saldatura.

Microprocessor controlled, MIG-MAG (continuous, PULSE, double pulse - PULSE ON PULSE), FLUX/ BRAZING/MMA/TIG-DC LIFT inverter welding machine with separate 4-roll wire feeder. Flexibility of use with a wide range of materials such as steel, stainless steel, high strength steels, galvanized sheets, aluminium and its alloys. SYNERGIC control of welding parameters.

VERSIONE STANDARD / STANDARD VERSION: cod. 815479 Completa di torcia 3 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola

IT, carrello. / Complete with 3 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor, trolley.



WATERCOOLEDVERSION

802219 COMANDO A DISTANZA MANUALE 1 POT. 1 POT. MANUAL REMOTE CONTROL 150,00802336 COMANDO A DISTANZA MANUALE 2 POT. 2 POT. MANUAL REMOTE CONTROL 160,00802017 COMANDO A DISTANZA A PEDALE FOOT REMOTE CONTROL 230,00802486 ADATTATORE BOBINA 200 MM COIL ADAPTOR 200 MM 14,00980559 KIT SCHEDA PUSH PULL PUSH PULL BOARD KIT 90,00980604 KIT CAVO ALIMENTAZIONE GRA GRA MAINS CABLE KIT 35,00802292 KIT RUOTE TRAINAFILO WIRE FEEDER WHEELS KIT 21,00802673 GUANTI PROFESSIONALI SALDATURA PROFESSIONAL WELDING GLOVES 10,00802936 VANTAGE RED XL MASCHERA MMA-MIG/MAG-TIG VANTAGE RED XL MMA-MIG/MAG-TIG HELMET 124,00


722798 MT40 TORCIA MIG 3 M 500 A MT40 MIG TORCH 3 M 500 A 270,00722800 MT40 TORCIA MIG 5 M 500 A MT40 MIG TORCH 5 M 500 A 390,00802348 KIT CAVI COLLEGAMENTO 70 MMQ 4 M CONNECTING CABLES KIT 70 MMQ 4 M 300,00802349 KIT CAVI COLLEGAMENTO 70 MMQ 10 M CONNECTING CABLES KIT 70 MMQ 10 M 590,00742427 ST26 TORCIA TIG 4 M 220 A ST26 TIG TORCH 4 M 220 A 150,00742463 ST26 TORCIA TIG 4 M 220 A BLUE LINE ST26 TIG TORCH 4 M 220 A BLUE LINE 182,00742431 ST26 TORCIA TIG 8 M 220 A ST26 TIG TORCH 8 M 220 A 235,00742464 ST26 TORCIA TIG 8 M 220 A BLUE LINE ST26 TIG TORCH 8 M 220A BLUE LINE 310,00

WATERCOOLEDVERSION

AQUA

ActiveSynergy


ROOT-MIG


WATERCOOLEDVERSION






Saldatrice inverter a fi lo MIG-MAG (continuo, PULSATO, doppio pulsato - PULSE ON PULSE), FLUX/BRAZING/MMA/TIG-DC LIFT, controllata a microprocessore, con trainafi lo separato a 4 rulli. Flessibilità di impiego con diversi tipi di materiali quali acciaio, acciaio inox, acciai ad alta resistenza, lamiere zincate, alluminio e leghe. Controllo SINERGICO dei parametri di saldatura.

Microprocessor controlled, MIG-MAG (continuous, PULSE, double pulse - PULSE ON PULSE), FLUX/BRAZING/MMA/TIG-DC LIFT inverter welding machine with separate 4-roll wire feeder. Flexibility of use with a wide range of materials such as steel, stainless steel, high strength steels, galvanized sheets, aluminium and its alloys. SYNERGIC control of welding parameters.

VERSIONE STANDARD / STANDARD VERSION: cod. 815490 Completa di torcia 3 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola

IT, carrello. / Complete with 3 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor, trolley.




INVERTER








722625 MT500 TORCIA MIG 3 M 500 A AQUA MT500 MIG TORCH 3 M 500 A AQUA 254,00722683 MT500 TORCIA MIG 5 M 500 A AQUA MT500 MIG TORCH 5 M 500 A AQUA 310,00802398 KIT CAVI COLLEGAMENTO 70 MMQ 4 M AQUA CONNECTING CABLES KIT 70 MMQ 4 M AQUA 370,00802399 KIT CAVI COLLEGAMENTO 70 MMQ 10 M AQUA CONNECTING CABLES KIT 70 MMQ 10 M AQUA 660,00802470 KIT CAVI COLLEGAMENTO 95 MMQ 30 M AQUA CONNECTING CABLES KIT 95 MMQ 30 M AQUA 2.300,00742570 ST18A TORCIA TIG 4 M 350 A AQUA ST18A TIG TORCH 4 M 350 A AQUA 164,00742462 ST18A TORCIA TIG 4 M 350 A AQUA BLUE LINE ST18A TIG TORCH 4 M 350 A AQUA BLUE LINE 294,00742497 ST18A TORCIA TIG 8 M 350 A AQUA BLUE LINE ST18A TIG TORCH 8 M 350 A AQUA BLUE LINE 380,00

803071 CARRELLO - UNIVERSAL TROLLEY - UNIVERSAL 500,00802497 GRUPPO RAFFREDDAMENTO ACQUA G.R.A. 3000 WATER COOLING UNIT G.R.A. 3000 230V 970,00803055 KIT SUPPORTO DOPPIA BOMBOLA TWO GASBOTTLE HOLDER KIT 120,00

722346 RIDUTTORE PRESSIONE 2 MANOMETRI GAS REGULATOR 2 MANOMETERS 84,00802409 KIT SALDATURA ALLUMINIO D. 1-1,6 MM (AQUA) ALUMINIUM WELDING KIT D. 1-1,6 MM (AQUA) 186,00802276 KIT SALDATURA FILO ANIMATO D. 1-2,4 MM FLUX CORED WIRE WELDING KIT D. 1-2,4 MM 114,00713282 PINZA PORTAELETTRODO CAVO 25MMQ 4M DX50 ELECTRODE HOLDER CABLE 25MMQ 4M DX50 40,00


802219 COMANDO A DISTANZA MANUALE 1 POT. 1 POT. MANUAL REMOTE CONTROL 150,00802336 COMANDO A DISTANZA MANUALE 2 POT. 2 POT. MANUAL REMOTE CONTROL 160,00802017 COMANDO A DISTANZA A PEDALE FOOT REMOTE CONTROL 230,00802486 ADATTATORE BOBINA 200 MM COIL ADAPTOR 200 MM 14,00980559 KIT SCHEDA PUSH PULL PUSH PULL BOARD KIT 90,00980604 KIT CAVO ALIMENTAZIONE GRA GRA MAINS CABLE KIT 35,00802292 KIT RUOTE TRAINAFILO WIRE FEEDER WHEELS KIT 21,00802673 GUANTI PROFESSIONALI SALDATURA PROFESSIONAL WELDING GLOVES 10,00802936 VANTAGE RED XL MASCHERA MMA-MIG/MAG-TIG VANTAGE RED XL MMA-MIG/MAG-TIG HELMET 124,00


722798 MT40 TORCIA MIG 3 M 500 A MT40 MIG TORCH 3 M 500 A 270,00722800 MT40 TORCIA MIG 5 M 500 A MT40 MIG TORCH 5 M 500 A 390,00802348 KIT CAVI COLLEGAMENTO 70 MMQ 4 M CONNECTING CABLES KIT 70 MMQ 4 M 300,00802349 KIT CAVI COLLEGAMENTO 70 MMQ 10 M CONNECTING CABLES KIT 70 MMQ 10 M 590,00742427 ST26 TORCIA TIG 4 M 220 A ST26 TIG TORCH 4 M 220 A 150,00742463 ST26 TORCIA TIG 4 M 220 A BLUE LINE ST26 TIG TORCH 4 M 220 A BLUE LINE 182,00742431 ST26 TORCIA TIG 8 M 220 A ST26 TIG TORCH 8 M 220 A 235,00742464 ST26 TORCIA TIG 8 M 220 A BLUE LINE ST26 TIG TORCH 8 M 220A BLUE LINE 310,00

AQUA

ActiveSynergy


ROOT-MIG

WATERCOOLEDVERSION

A

AcAAcAcASynSSynSynS

MULTIMIG -

ROO


Saldatrice inverter TIG con innesco LIFT ed MMA in corrente continua (DC). Impiego con diversi tipi di materiali quali acciaio, acciaio inox, titanio, rame, nichel e loro leghe. Completa di valigetta in plastica, torcia 4 m, cavo e pinza di massa, riduttore di pressione.

TIG LIFT striking and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys.Complete with plastic carry case, 4 m torch, work clamp and cable, gas regulator.

cod. 816214

Potenza Assorbita Absorbed power 4,1 kW



Corrente in uscita Output current 140 A @ 10%

SALDATRICE AD INVERTER TIG/MMATIG/MMA INVERTER WELDING MACHINE

TIG LIFT

FORCE 170 TIG DC-LIFTINVERTER

816014 SOLO GENERATORE / GENERATOR ONLY 332,00

816214 FORCE 170 TIG DC-LIFT + ACC. TIG & VAL. PLASTICA / + TIG ACC. & PLASTIC CARRY CASE 482,00


713058 CAVO 16 MMQ 2 M DX25 E PINZA DI MASSA CABLE 16 MMQ 2 M WORK CLAMP DX25 19,00



722120 RIDUTTORE PRESSIONE BOMBOLA PERDERE GAS REGULATOR THROWAWAY BOTTLE 25,00

722341 RIDUTTORE PRESSIONE BOMBOLA RICARICABILE GAS REGULATOR REFILLABLE BOTTLE 34,00


850000 CLEANTECH 100 CLEANTECH 100 410,00

802632 GUANTI PROFESSIONALI SALDATURA TIG PROFESSIONAL GLOVES TIG WELDING 25,00



TOTAL



MMA ADJUSTABLE• ARC FORCE• HOT-START

DIGITAL


KIT & TORCE / KIT & TORCHES

KIT GAS & RIDUTTORI / GAS KITS & GAS REGULATORS



Saldatrice inverter TIG con innesco LIFT ed MMA in corrente continua (DC). Impiego con diversi tipi di materiali quali acciaio, acciaio inox, titanio, rame, nichel e loro leghe. Completa di valigetta in plastica, torcia 4 m, cavo, pinza di massa e pinza portaelettrodo, riduttore di pressione.

TIG LIFT striking and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys.Complete with plastic carry case, 4 m torch, work clamp, cable and electrode holder, gas regulator.

cod. 816220




Corrente in uscita Output current 160A @ 20% / 110 A @ 60%

SALDATRICE INVERTER TIG/MMATIG/MMA INVERTER WELDING MACHINE

TIG LIFT

TECNICA 190 TIG DC-LIFT VRDINVERTER

MMA ADJUSTABLE• ARC FORCE• HOT-STARTDIGITAL


816220 TECNICA 190 TIG DC-LIFT VRD + ACC. TIG/MMA & VALIGETTA IN PLASTICA/PLASTIC CARRY CASE 600,00


713058 CAVO 16 MMQ 2 M PINZA DI MASSA DX25 CABLE 16 MMQ 2 M WORK CLAMP DX25 19,00



722120 RIDUTTORE PRESSIONE BOMBOLA PERDERE GAS REGULATOR THROWAWAY BOTTLE 25,00

722341 RIDUTTORE PRESSIONE BOMBOLA RICARICABILE GAS REGULATOR REFILLABLE BOTTLE 34,00






TOTAL








Saldatrice inverter TIG con innesco LIFT ed MMA in corrente continua (DC). Impiego con diversi tipi di materiali quali acciaio, acciaio inox, titanio, rame, nichel e loro leghe. Completa di torcia 4 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.

TIG LIFT striking and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys. Complete with 4 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 852052

Potenza Assorbita Absorbed power 60%/max 2,2 / 2,8 kW 3,7 / 5,9 kW

Tensione di rete Mains voltage (50/60 Hz) 100-120V 1ph 200-240V 1ph

Campo di regolazione Current range 10÷130 A 10÷200 A

Corrente in uscita Output current 130 A @ 40%* 200 A @ 30% 110 A @ 60% 135 A @ 60%

SALDATRICE INVERTER TIG/MMATIG/MMA INVERTER WELDING MACHINE INVERTER

ADVANCE 227 MV/PFC TIG DC-LIFT VRD

MMA ADJUSTABLE• ARC FORCE• HOT-START

DIGITALTIG LIFT


852052 ADVANCE 227 MV/PFC TIG DC-LIFT VRD + ACCESSORI TIG / + TIG ACCESSORIES 944,00










TOTAL



(*) Corrente in uscita max / Max output current 40°C=150A@30% fusibile/fuse 20A






Saldatrice inverter TIG (con innesco alta frequenza (HF) o LIFT) ed MMA in corrente continua (DC). Impiego con diversi tipi di materiali quali acciaio, acciaio inox, titanio, rame, nichel e loro leghe. Completa di valigetta in alluminio, torcia 4 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.

TIG (high frequency (HF) or LIFT striking) and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys. Complete with aluminium carry case, 4 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 815957






TECNICA TIG 160 DC-HF/LIFTINVERTER


815957 TECNICA TIG 160 DC-HF/LIFT + ACC. TIG & VALIGETTA ALLUMINIO / + TIG ACC. & ALUMINIUM CARRY CASE 1.020,00








802017 COMANDO A DISTANZA A PEDALE FOOT REMOTE CONTROL 230,00





TOTAL


742423 ST17 TORCIA TIG 4 M 180 A ST17 TIG TORCH 4 M 180 A 110,00

742460 ST17 TORCIA TIG 4 M 180 A BLUE LINE ST17 TIG TORCH 4 M 180 A BLUE LINE 136,00






Saldatrice inverter TIG (innesco alta frequenza (HF) o LIFT) ed MMA in corrente continua (DC). Impiego con diversi tipi di materiali quali acciaio, acciaio inox, titanio, rame, nichel e loro leghe.

Completa di valigetta in alluminio, torcia 4 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.

TIG (high frequency (HF) or LIFT striking) and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys.

Complete with aluminium carry case, 4 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 815956






TECHNOLOGY TIG 185 DC-HF/LIFTINVERTER


815956 TECHNOLOGY TIG 185 DC-HF/LIFT + ACC. TIG & VALIGETTA ALLUMINIO / ALUMINIUM CARRY CASE 1.170,00









802057 COMANDO A DISTANZA TIG PULSE MANUAL REMOTE CONTROL TIG PULSE 230,00





TOTAL









Saldatrice inverter TIG (innesco alta frequenza HF o LIFT), TIG PULSATO-PULSATO EASY ed MMA in corrente continua (DC), controllata a microprocessore. Impiego con diversi tipi di materiali quali acciaio inox, titanio, rame, nichel e loro leghe.


Microprocessor controlled, TIG (high frequency HF or LIFT striking), PULSE TIG-EASY PULSE and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys.

Complete with 4 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 852055






TECHNOLOGY TIG 230 DC-HF/LIFT VRDINVERTER

816040 SOLO GENERATORE / GENERATOR ONLY 1.150,00

852055 TECHNOLOGY TIG 230 DC-HF/LIFT VRD + ACCESSORI TIG / + TIG ACCESSORIES 1.440,00
















TOTAL


742614 ST26 TORCIA TIG 4 M 220 A 5P ST26 TIG TORCH 4 M 220 A 5P 155,00

742616 ST26 TORCIA TIG 8 M 5P ST26 TIG TORCH 8 M 5P 237,00

742618 ST26 TORCIA TIG 4 M 220 A GREEN LINE POT ST26 TIG TORCH 4 M 220 A GREEN LINE POT 264,00


802810 REMOTE DEVICE (PER TORCE GREEN LINE) REMOTE DEVICE (FOR GREEN LINE TORCHES) 100,00





Saldatrice inverter TIG (innesco alta frequenza (HF) o LIFT) TIG PULSATO ed MMA in corrente continua e alternata (AC/DC), controllata a microprocessore. Impiego con diversi tipi di materiali quali acciaio, acciaio inox, alluminio, titanio, rame, nichel, magnesio e loro leghe. Completa di torcia 4 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.

Microprocessor controlled, TIG (high frequency (HF) or LIFT striking), PULSE TIG and MMA inverter welding machine in direct and alternating current (AC/DC). Use with a wide range of materials such as steel, stainless steel, aluminium, titanium, copper, nickel, magnesium and their alloys. Complete with 4 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 852030






TECHNOLOGY TIG 182 AC/DC-HF/LIFTINVERTER


852030 TECHNOLOGY TIG 182 AC/DC-HF/LIFT + ACCESSORI TIG / + TIG ACCESSORIES 1.960,00













TOTAL



742460 ST17 TORCIA TIG 4 M 180 A BLUELINE ST17 TIG TORCH 4 M 180 A BLUELINE 136,00






Saldatrice inverter TIG (innesco alta frequenza (HF) o LIFT), TIG PULSATO ed MMA in corrente continua e alternata (AC/DC), controllata a microprocessore. Impiego con diversi tipi di materiali quali quali acciaio, acciaio inox, alluminio, titanio, rame, nichel, magnesio e loro leghe. Completa di torcia 4 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.

Microprocessor controlled, TIG (high frequency (HF) or LIFT striking), PULSE TIG and MMA inverter welding machine in direct and alternating current (AC/DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel, magnesium and their alloys. Complete with 4 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 852054






TECHNOLOGY TIG 222 AC/DC-HF/LIFT VRD


852054 TECHNOLOGY TIG 222 AC/DC-HF/LIFT VRD+ ACCESSORI TIG / + TIG ACCESSORIES 2.460,00














TOTAL












Saldatrice inverter TIG (innesco alta frequenza (HF) o LIFT), TIG PULSATO ed MMA in corrente continua (DC), controllata a microprocessore. Impiego con diversi tipi di materiali quali acciaio, acciaio inox, titanio, rame, nichel e loro leghe. Completa di torcia 4 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.

Microprocessor controlled, TIG, (high frequency (HF) or LIFT striking) PULSE TIG and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys. Complete with 4 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 816116






SUPERIOR TIG 251 DC-HF/LIFT VRD


816116 SUPERIOR TIG 251 DC-HF/LIFT VRD + ACCESSORI TIG / + TIG ACCESSORIES 1.850,00















TOTAL












Saldatrici inverter TIG (innesco alta frequenza (HF) o LIFT), TIG PULSATO ed MMA in corrente continua e alternata (AC/DC), controllate a microprocessore. Impiego con diversi tipi di materiali quali acciaio, acciaio inox, alluminio, titanio, rame, nichel, magnesio e loro leghe. Complete di torcia 4 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT, (mod. AQUA: gruppo raffreddamento ad acqua G.R.A. 4500).

Microprocessor controlled, TIG (high frequency (HF) or LIFT striking), PULSE TIG and MMA inverter welding machines in direct and alternating current (AC/DC). Use with a wide range of materials such as steel, stainless steel, aluminium, titanium, copper, nickel, magnesium and their alloys. Complete with 4 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor, (mod. AQUA: water cooling unit G.R.A. 4500).

cod. 816117 cod. 816119 AQUA VERSION





SALDATRICI INVERTER TIG/MMATIG/MMA INVERTER WELDING MACHINES INVERTER

SUPERIOR TIG 252 AC/DC-HF/LIFT VRD (AQUA)

AQUA


816117 SUPERIOR TIG 252 AC/DC-HF/LIFT VRD + ACCESSORI TIG / + TIG ACCESSORIES 2.720,00

816119 SUPERIOR TIG 252 AC/DC-HF/LIFT VRD AQUA 3.520,00

802788 KIT SALDATURA TIG TIG WELDING KIT 272,00742614 ST26 TORCIA TIG 4 M 220 A 5P ST26 TIG TORCH 4 M 220 A 5P 155,00742616 ST26 TORCIA TIG 8 M 5P ST26 TIG TORCH 8 M 5P 237,00742618 ST26 TORCIA TIG 4 M 220 A GREEN LINE POT ST26 TIG TORCH 4 M 220 A GREEN LINE POT 264,00742619 ST26 TORCIA TIG 8 M 220 A GREEN LINE POT ST26 TIG TORCH 8 M 220 A GREEN LINE POT 382,00802810 REMOTE DEVICE (PER TORCE GREEN LINE) REMOTE DEVICE (FOR GREEN LINE TORCHES ) 100,00


KIT & TORCE: NON RAFFREDDATI / KIT & TORCHES: NOT COOLED

802789 KIT SALDATURA TIG AQUA AQUA TIG WELDING KIT 286,00742615 ST18A TORCIA TIG 4 M 350 A AQUA 5P ST18A TIG TORCH 4 M 350 A AQUA 5P 166,00742617 ST18A TORCIA TIG 4 M 350 A AQUA GREEN POT ST18A TIG TORCH 4 M 350 A AQUA GREEN POT 370,00742620 ST18A TORCIA TIG 8 M 350 A AQUA GREEN POT ST18A TIG TORCH 8 M 350 A AQUA GREEN POT 456,00

803074 CARRELLO - AMERICA TROLLEY - AMERICA 120,00803059 CARRELLO - ARCTIC TROLLEY - ARCTIC 196,00802790 GRUPPO RAFFREDDAMENTO ACQUA GRA 4500 WATER COOLING UNIT GRA 4500 600,00

802067 KIT ATTACCO BOMBOLA INDUSTRIALE INDUSTRIAL TYPE BOTTLE CONNECTION KIT 8,40722119 RIDUTTORE PRESSIONE 2 MANOMETRI GAS REGULATOR 2 MANOMETERS 49,00

ADATTATORI BOMBOLA: VEDI PAG. 60 GAS ADAPTOR: SEE PAG. 60

850000 CLEANTECH 100 CLEANTECH 100 410,00713169 CAVO 25 MMQ 3 M PINZA DI MASSA DX50 CABLE 25 MMQ 3 M WORK CLAMP DX50 42,00802219 COMANDO A DISTANZA MANUALE 1 POT. 1 POT. MANUAL REMOTE CONTROL 150,00802336 COMANDO A DISTANZA MANUALE 2 POT. 2 POT. MANUAL REMOTE CONTROL 160,00802017 COMANDO A DISTANZA A PEDALE FOOT REMOTE CONTROL 230,00802632 GUANTI PROFESSIONALI SALDATURA TIG PROFESSIONAL GLOVES TIG WELDING 25,00802816 STREAM FLAME MASCHERA MMA-MIG/MAG-TIG STREAM FLAME MMA-MIG/MAG-TIG HELMET 73,00802837 TRIBE MASCHERA MMA-MIG/MAG-TIG TRIBE MMA-MIG/MAG-TIG HELMET 48,00


TOTAL

KIT & TORCE TIG: RAFFREDDATI AD ACQUA / KIT & TIG TORCHES: WATER COOLED

CARRELLI & GRUPPO RAFFREDDAMENTO / TROLLEYS & WATER COOLING UNIT

KIT GAS & RIDUTTORI/ GAS KITS & GAS REGULATORS



Saldatrice inverter TIG (innesco alta frequenza (HF) o LIFT) ed MMA in corrente continua (DC). Impiego con diversi tipi di materiali quali acciaio, acciaio inox, titanio, rame, nichel e loro leghe.


TIG (high frequency (HF) or LIFT striking) and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys. Complete with 4 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 816100






SUPERIOR TIG 311 DC-HF/LIFT


816100 SUPERIOR TIG 311 DC-HF/LIFT + ACCESSORI TIG / + TIG ACCESSORIES 2.280,00





803051 CARRELLO TROLLEY 280,00










TOTAL











Saldatrice inverter TIG (innesco alta frequenza (HF) o LIFT), TIG PULSATO ed MMA in corrente continua e alternata (AC/DC), controllata a microprocessore. Impiego con diversi tipi di materiali quali acciaio, acciaio inox, alluminio, titanio, rame, nichel, magnesio e loro leghe. Completa di torcia 4 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.


cod. 816101






SUPERIOR TIG 322 AC/DC-HF/LIFT


816101 SUPERIOR TIG 322 AC/DC-HF/LIFT + ACCESSORI TIG / + TIG ACCESSORIES 4.230,00

816102 SUPERIOR TIG 322 AC/DC-HF/LIFT AQUA 5.640,00

802637 KIT SALDATURA TIG AQUA AQUA TIG WELDING KIT 284,00

742570 ST18A TORCIA TIG 4 M 350 A AQUA ST18A TIG TORCH 4 M 350 A AQUA 164,00

742462 ST18A TORCIA TIG 4 M 350 A AQUA BLUE LINE ST18A TIG TORCH 4M 350A AQUA BLUE LINE 294,00



803072 CARRELLO - MONDIAL TROLLEY - MONDIAL 410,00



















TOTAL


KIT & TORCE TIG: NON RAFFREDDATI / KIT & TIG TORCHES: NOT COOLED






Saldatrice inverter TIG (innesco alta frequenza (HF) o LIFT), TIG PULSATO ed MMA in corrente continua e alternata (AC/DC), controllata a microprocessore. Impiego con diversi tipi di materiali quali acciaio, acciaio inox, alluminio, titanio, rame, nichel, magnesio e loro leghe. Completa di torcia 4 m raffreddata ad acqua, cavo e pinza di massa, gruppo raffreddamento ad acqua GRA 4000, riduttore di pressione 2 manometri, adattatore bombola IT, carrello.

Microprocessor controlled, TIG (high frequency (HF) or LIFT striking), PULSE TIG and MMA inverter welding machine in direct and alternating current (AC/DC). Use with a wide range of materials such as steel, stainless steel, aluminium, titanium, copper, nickel, magnesium and their alloys. Complete with 4 m water cooled torch, work clamp and cable, water cooling unit GRA 4000, 2-manometer gas regulator, IT gas bottle adaptor, trolley.

cod. 816102 AQUA VERSION

SALDATRICE INVERTER TIG/MMA RAFFREDDATA AD ACQUATIG/MMA WATER COOLED INVERTER WELDING MACHINE

Cod. 816016

Cod. 802637

TIG AQUA ACCESSORI / ACCESSORIES

GENERATORE / GENERATOR

G.R.A. 4000

CARRELLO TIG / TIG TROLLEY - MONDIAL

Cod. 802640

Cod. 803072

d. 816016

/

COMPLETE WITH

SUPERIOR TIG 322 AC/DC-HF/LIFT AQUA

AQUA


Saldatrice inverter TIG (innesco alta frequenza (HF) o LIFT), TIG PULSATO ed MMA in corrente continua (DC), controllata a microprocessore. Impiego con diversi tipi di materiali quali acciaio, acciaio inox, titanio, rame, nichel e loro leghe. Completa di torcia 4 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.

Microprocessor controlled, TIG, (high frequency (HF) or LIFT striking) PULSE TIG and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys. Complete with 4 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 816103






SUPERIOR TIG 421 DC-HF/LIFTINVERTER


816103 SUPERIOR TIG 421 DC-HF/LIFT + ACCESSORI TIG / + TIG ACCESSORIES 3.470,00

816104 SUPERIOR TIG 421 DC-HF/LIFT AQUA 4.870,00

























TOTAL








Saldatrice inverter TIG (innesco alta frequenza (HF) o LIFT), TIG PULSATO ed MMA in corrente continua (DC), controllata a microprocessore. Impiego con diversi tipi di materiali quali acciaio, acciaio inox, titanio, rame, nichel e loro leghe. Completa di torcia 4 m raffreddata ad acqua, cavo e pinza di massa, gruppo raffreddamento ad acqua GRA 4000, riduttore di pressione 2 manometri, adattatore bombola IT, carrello.

Microprocessor controlled, TIG, (high frequency (HF) or LIFT) PULSE TIG striking and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys. Complete with 4 m water cooled torch, work clamp and cable, water cooling unit GRA 4000, 2-manometer gas regulator, IT gas bottle adaptor, trolley.

cod. 816104 AQUA VERSION Cod. 816017

Cod. 802637

G.R.A. 4000

Cod. 802640

Cod. 803072

d. 816017

SALDATRICE INVERTER TIG/MMA RAFFREDDATA AD ACQUATIG/MMA WATER COOLED INVERTER WELDING MACHINE




COMPLETE WITH

SUPERIOR TIG 421 DC-HF/LIFT AQUA

AQUA







Saldatrice inverter TIG (innesco alta frequenza (HF) o LIFT), TIG PULSATO ed MMA in corrente continua e alternata (AC/DC), controllata a microprocessore. Impiego con diversi tipi di materiali quali acciaio, acciaio inox, alluminio, titanio, rame, nichel, magnesio e loro leghe. Completa di torcia 4 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.


cod. 816105

INVERTER

SUPERIOR TIG 422 AC/DC-HF/LIFT


816105 SUPERIOR TIG 422 AC/DC-HF/LIFT + ACCESSORI TIG / + TIG ACCESSORIES 5.020,00

816106 SUPERIOR TIG 422 AC/DC-HF/LIFT AQUA 6.430,00

























TOTAL








Cod. 816018

Cod. 802637

G.R.A. 4000

Cod. 802640

Cod. 803072

d. 816018

Saldatrice inverter TIG (innesco alta frequenza (HF) o LIFT), TIG PULSATO ed MMA in corrente continua e alternata (AC/DC), controllata a microprocessore. Impiego con diversi tipi di materiali quali acciaio, acciaio inox, alluminio, titanio, rame, nichel, magnesio e loro leghe. Completa di torcia 4 m raffreddata ad acqua, cavo e pinza di massa, gruppo raffreddamento ad acqua GRA 4000, riduttore di pressione 2 manometri, adattatore bombola IT, carrello.

Microprocessor controlled, TIG (high frequency (HF) or LIFT striking), PULSE TIG and MMA inverter welding machine in direct and alternating current (AC/DC). Use with a wide range of materials such as steel, stainless steel, aluminium, titanium, copper, nickel, magnesium and their alloys. Complete with 4 m water cooled torch, work clamp and cable, water cooling unit GRA 4000, 2-manometer gas regulator, IT gas bottle adaptor, trolley.

cod. 816106 AQUA VERSION

SALDATRICE INVERTER TIG/MMA RAFFREDDATA AD AQUATIG/MMA WATER COOLED INVERTER WELDING MACHINE




COMPLETE WITH

SUPERIOR TIG 422 AC/DC-HF/LIFT AQUA

AQUA


Saldatrice TIG (innesco alta frequenza HF) ed MMA in corrente continua ed alternata (AC/DC). Impiego con diversi tipi di materiali quali acciaio, acciaio inox, alluminio, titanio, rame, nichel, magnesio e loro leghe. Completa di torcia 4 m, cavo e pinza di massa, riduttore di pressione 2 manometri, adattatore bombola IT.

TIG (high frequency HF striking) and MMA inverter welding machine in direct and alternating current (AC/DC). Use with a wide range of materials such as steel, stainless steel, aluminium, titanium, copper, nickel, magnesium and their alloys.Complete with 4 m torch, work clamp and cable, 2-manometer gas regulator, IT gas bottle adaptor.

cod. 832160



Campo di regolazione Current range 30÷180A AC / 25÷150A DC

Corrente in uscita Output current 170A @ 15% / 75A @ 60% AC140A @ 25% / 80A @ 60% DC

SALDATRICE ELETTROMECCANICA TIG/MMATIG/MMA ELECTROMECHANICAL WELDING MACHINE ELECTROMECHANICAL

SUPERTIG 200 AC/DC-HF

832160 SUPERTIG 200 AC/DC-HF 2.300,00







TOTAL




TORCE TIG / TIG TORCHES







SALDATRICE A TIRISTORI TIG/MMATIG/MMA THYRISTORS WELDING MACHINE

Saldatrice a tiristori TIG (innesco alta frequenza (HF) o LIFT) ed MMA in corrente continua ed alternata (AC/DC). Impiego con diversi tipi di materiali quali acciaio, acciaio inox, alluminio, titanio, rame, nichel, magnesio e loro leghe.

Thyristor-controllled TIG (high frequency (HF) or LIFT striking) and MMA inverter welding machine in direct and alternating current (AC/DC). Use with a wide range of materials such as steel, stainless steel, aluminium, titanium, copper, nickel, magnesium and their alloys.



VERSIONE RAFFREDDATA AD ACQUA / WATER COOLED VERSION (AQUA): cod. 833017 Completa di torcia 4 m raffreddata ad acqua, cavo e pinza di massa, gruppo raffreddamento ad

acqua, riduttore di pressione 2 manometri, adattatore bombola IT. / Complete with 4 m water cooled torch, work clamp and cable, water cooling unit, 2-manometer gas regulator, IT gas bottle adaptor.



Campo di regolazione Current range 15÷250A AC / 15÷250A DC

Corrente in uscita Output current 250A @ 30% / 170A @ 60% AC250A @ 30% / 180A @ 60% DC

THYRISTORS

SUPERTIG 280/1 AC/DC-HF/LIFT (AQUA)

832161 SUPERTIG 280/1 AC/DC-HF/LIFT 3.520,00

833017 SUPERTIG 280/1 AC/DC-HF/LIFT AQUA 4.390,00




742426 ST18A TORCIA TIG 4 M 350 A AQUA ST18A TORCH 4 M 350 A AQUA 254,00

742462 ST18A TORCIA TIG 4 M 350 A AQUA BLUE LINE ST18A TIG TORCH 4 M 350 A AQUA BLUE LINE 294,00





802336 COMANDO A DISTANZA MANUALE 2 POT. 2POT. MANUAL REMOTE CONTROL 160,00







TOTAL

AQUA


ACCESSORI TIG: NON RAFFREDDATI / TIG ACCESSORIES: NOT COOLED

ACCESSORI TIG: RAFFREDDATI AD ACQUA / TIG ACCESSORIES: WATER COOLED




742463 ST26 TORCIA TIG 4 M 220 A BLUE LINE ST26 TIG TORCH 4 M 220 A BLUELINE 182,00


742464 ST26 TORCIA TIG 8 M 220 A BLUE LINE ST26 TIG TORCH 8 M 220 A BLUELINE 310,00


TECNICA PLASMA 31, TECHNOLOGY PLASMA 41 - 54K

INVERTER

Sistemi inverter di taglio al plasma ad aria compressa con innesco a contatto dell’arco pilota. Consentono il taglio veloce senza deformazione di tutti i materiali conduttori quali acciaio, acciaio inox, acciaio galvanizzato, alluminio, rame, ottone, ecc.

Completi di torcia 4 m, cavo e pinza di massa.

Inverter, compressed air plasma cutting systems, with contact striking of pilot arc. Allow a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass, etc.. Complete with 4 m torch work clamp and cable.

Potenza assorbita max Max absorbed power 2,8 kW 4 kW 4,5 kW

Tensione di rete Mains voltage (50/60 Hz) 230V 1ph 230V 1ph 230V 1ph

Spessore di taglio max Max cutting thickness 8 mm 12 mm 10 mm

Corrente in uscita Output current 25A @ 20% 35A @ 30% 35A @ 30%

SISTEMI INVERTER DI TAGLIO AL PLASMA / INVERTER PLASMA CUTTING SYSTEMS

TECNICA PLASMA 31 TECHNOLOGY PLASMA 41 TECHNOLOGY PLASMA 54K

DESCRIZIONE/ DESCRIPTION CODE € Q.TY CODE € Q.TY CODE € Q.TY TOTAL €

TECNICA PLASMA 31 815014 970,00

TECHNOLOGY PLASMA 41 815493 1.020,00

TECHNOLOGY PLASMA 54K 815088 1.326,00

TORCE / TORCHES 742237 272,00 742237 272,00 742381 272,00

UGELLI / NOZZLES 802423 13,00 802423 13,00 802423 13,00

ELETTRODI / ELECTRODES 802420 14,00 802420 14,00 802420 14,00

UGELLI PROLUNGATILONG NOZZLES 802429 16,80 802429 16,80

ELETTRODI PROLUNGATILONG ELECTRODES 802428 18,00 802428 18,00

PUNTALI TORCIATORCH SAFETY CAPS 802425 25,00 802425 25,00 802485 26,40

DIFFUSORI ISOLANTIINSULATING DIFFUSERS 802422 50,00 802422 50,00 802422 50,00

GUIDE MAGNETICHEMAGNETIC GUIDES 802143 20,00 802143 20,00 802143 20,00

UNITÀ CIRCOLARE DI TAGLIOCIRCULAR CUTTING UNITS 802214 55,00 802214 55,00 802214 55,00

TOTAL

TECNICA PLASMA 31 TECHNOLOGY PLASMA 41 TECHNOLOGY PLASMA 54K


SUPERIOR PLASMA 60 HF SUPERIOR PLASMA 90 HF SUPERIOR PLASMA 160


SUPERIOR PLASMA 60 HF 815506 2.450,00

SUPERIOR PLASMA 90 HF 815518 3.650,00

SUPERIOR PLASMA 160 816174 5.600,00

TORCE / TORCHES 6M 742040 294,00 722332 400,00 802867 600,00

TORCE / TORCHES 12M - - 722333 700,00 742635 600,00

TORCIA DRITTA/STRAIGHT TORCH 12M - - 722334 830,00 -

SCHERMO SCRICCATURA / GOUGING SHIELD - - - - 802928 80,00

UGELLI SCRICCATURA / GOUGING NOZZLES - - - - 802929 60,00

UGELLI / NOZZLES

802077 9,00 802119 16,50 802930 44,00

- - 802124 16,50 802931 44,00

- - - - 802932 44,00

ELETTRODI / ELECTRODES 802076 14,00 802122 16,00802898 33,00

- -

UGELLI PROLUNGATI / LONG NOZZLES 802079 13,00 802083 43,00 - -

ELETTRODI PROLUNGATI/LONG ELECTRODES 802078 16,00 802082 29,00 - -

PUNTALI TORCIA / TORCH SAFETY CAPS 802081 20,00 802126 58,20 802933 110,00

DISTANZIALI / SPACERS 802128 7,00 802127 10,00 802934 44,00

DIFFUSORI ISOLANTI/INSULATING DIFFUSERS 802080 22,00 802123 46,60 802899 46,00

DIFFUSORI OTTONE / BRASS DIFFUSORS - - 802121 21,00 - -

TUBETTO RAFFREDDAMENTO/COOLING PIPE - - - - 802897 25,00

ANELLI OR / OR RINGS - - 802120 4,60 - -

GUIDE MAGNETICHE / MAGNETIC GUIDES 802143 20,00 802143 20,00 - -

UNITA’ CIRCOLARE DI TAGLIO/CIRCULAR CUTTING UNITS 802218 182,00 802211 180,00 - -

TOTAL

SUPERIOR PLASMA 60 HF - 90 HF - 160

INVERTER

Sistemi inverter di taglio al plasma ad aria compressa, con innesco HF (mod.60,90) e a contatto (mod.160). Consentono il taglio veloce senza deformazione di tutti i materiali conduttori quali acciaio, acciaio inox, acciaio galvanizzato, alluminio, rame, ottone, ecc.


Inverter, compressed air plasma cutting systems with high frequency HF striking (mod.60,90) and contact striking (mod.160) of pilot arc. Allow a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass, etc. Complete with 6 m torch, work cable and clamp.

Potenza assorbita max Max absorbed power 7,5 kW 12 kW 25 kW

Tensione di rete Mains voltage (50/60 Hz) 400V 3ph 400V 3ph 230V/400V 3ph


Corrente in uscita Output current 60A @ 35% 90A @ 40% 150A @ 30% / 100 @ 30%


SUPERIOR PLASMA 60 HF SUPERIOR PLASMA 90 HF SUPERIOR PLASMA 160

PS TORCH


ENTERPRISE PLASMA 160 HF - SUPERPLASMA 83 - 130 HF

INVERTER

Sistemi di taglio al plasma ad aria compressa, con innesco HF dell’arco pilota. Consentono il taglio veloce senza deformazione di tutti i materiali conduttori quali acciaio, acciaio inox, acciaio galvanizzato, alluminio, rame, ottone, ecc.


Compressed air plasma cutting systems with high frequency HF striking of pilot arc. Allow a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass, etc.

Complete with 6 m torch, work cable and clamp.

Potenza assorbita max Max absorbed power 25 kW 11,5 kW 20 kW

Tensione di rete Mains voltage (50/60 Hz) 230V-400V 3ph 230V-400V 3ph 230V-400V 3ph


Corrente in uscita Output current 160 @ 40% 40A-70A @ 35% 115A @ 30%

ENTERPRISE PLASMA 160 HF SUPERPLASMA 83 HF SUPERPLASMA 130 HF


ENTERPRISE PLASMA 160 HF 815870 5.760,00

SUPERPLASMA 83 HF 830511 2.730,00

SUPERPLASMA 130 HF 830512 3.650,00

TORCE / TORCHES 6M 722332 400,00 722474 246,00 722332 400,00

TORCE / TORCHES 12M 722333 700,00 - - 722333 700,00

TORCIA DRITTA 12 MSTRAIGHT TORCH 722334 830,00 - - 722334 830,00

UGELLI / NOZZLES802119 16,50 802077 9,00 802119 16,50

802124 16,50 - - 802124 16,50

ELETTRODI / ELECTRODES 802122 16,00 802076 14,00 802122 16,00

UGELLI PROLUNGATILONG NOZZLES 802083 43,00 802079 13,00 802083 43,00

ELETTRODI PROLUNGATILONG ELECTRODES 802082 29,00 802078 16,00 802082 29,00

PUNTALI TORCIATORCH SAFETY CAPS 802126 58,20 802081 20,00 802126 58,20

DISTANZIALI / SPACERS 802127 10,00 802128 7,00 802127 10,00

DIFFUSORI ISOLANTIINSULATING DIFFUSERS 802123 46,60 802080 22,00 802123 46,60

DIFFUSORI OTTONE / BRASS DIFFUSOR 802121 21,00 - - 802121 21,00

ANELLI OR / OR RINGS 802120 4,60 - - 802120 4,60

GUIDE MAGNETICHEMAGNETIC GUIDES 802143 20,00 802143 20,00 802143 20,00

UNITÀ CIRCOLARE DI TAGLIOCIRCULAR CUTTING UNITS 802211 180,00 802218 182,00 802211 180,00

T TOTAL OTAL

ENTERPRISE PLASMA 160 HF SUPERPLASMA 130 HFSUPERPLASMA 83 HF

INVERTER


55CATALOGO-LISTINO • CATALOGUE-PRICE LIST 01/2016

FUSIBILI/FUSES

PREZZI UNITARIPREZZI UNITARIESCLUSI DI I.V.A.ESCLUSI DI I.V.A.

UNIT PRICESUNIT PRICESWITHOUT V.A.T.WITHOUT V.A.T.

cod. 432036 n. 1 adattatore per bombola/bottle adaptorcod. 123437 n. 1 cavo di massa +spina dinse/work cable 16mmq 3 m+dinse plug DX 25cod. 712030 n. 1 pinza di massa/ work clamp 250 Acod. 722119 n. 1 riduttore di pressione 2 manometri/2 manometers gas regulator cod. 722563 n. 1 ST9V torcia Tig/ Tig torch 4m 150A n. 1 elettrodo tungsteno ceriato+diffusore /cerium tungsten electrode + diffuser n. 1 ugello+pinza serra elettrodo / nozzle+electrode holder

KIT SALDATURA TIG/TIG WELDING KIT x Tecnica 171/S, 211/S, 188 MPGE, Advance 187 MV/PFC, Advance 227 Tig, Tecnica 190 Tig, Superior 245, Motoinverter 174 CE, 204 CE, 254 CE, 264D CE, Technology 186 HD, 216 HD, 236 HD, 238 CE/MPGE

cod. 801097€ 190,00

KIT SALDATURA TIG/TIG WELDING KIT x Force 170 Tig , Tecnica 151/S

cod. 432036 n. 1 adattatore per bombola/bottle adaptorcod. 123430 n. 1 cavo di massa +spina dinse/work cable 10mmq 3 m+dinse plug DX 25cod. 712030 n. 1 pinza di massa/ work clamp 250 Acod. 722341 n. 1 riduttore di pressione / gas regulator cod. 742565 n. 1 ST9V torcia Tig/ Tig torch 4m 140A n. 1 elettrodo tungsteno ceriato+diffusore /cerium tungsten electrode + diffuser n. 1 ugello+pinza serra elettrodo / nozzle+electrode holder

cod. 801113€ 138,00

cod. 432036 n. 1 adattatore per bombola/bottle adaptorcod. 123437 n. 1 cavo di massa +spina dinse/work cable 16mmq 3 m+dinse plug DX 25cod. 990701 n. 1 kit tubo gas+fascette/gas tube kit+hose ringcod. 712231 n. 1 pinza di massa/ work clamp 300 Acod. 722119 n. 1 riduttore di pressione 2 manometri/2 manometers gas regulator cod. 742423 n. 1 ST17 torcia Tig/ Tig torch 4m 180A n. 1 elettrodo tungsteno ceriato+diffusore / cerium tungsten electrode + diffuser n. 1 ugello+pinza serra elettrodo / nozzle+electrode holder

KIT SALDATURA TIG/TIG WELDING KIT x Tecnica Tig 160, Technology Tig 182, 185

cod. 802415€ 214,00

cod. 432036 n. 1 adattatore per bombola/bottle adaptor cod. 120133 n. 1 cavo di massa +spina dinse/work cable 25mmq 3 m+dinse plug DX 50cod. 990701 n. 1 kit tubo gas+fascette/gas tube kit+hose ringcod. 712231 n. 1 pinza di massa/ work clamp 300 Acod. 722119 n. 1 riduttore di pressione 2 manometri/2 manometers gas regulator cod. 742614 n. 1 ST26 torcia Tig/ Tig torch 4m 220A 5P n. 1 elettrodo tungsteno ceriato+diffusore / cerium tungsten electrode + diffuser n. 1 elettrodo tungsteno puro / pure tungsten electrode n. 1 ugello+pinza serra elettrodo / nozzle+electrode holder

cod. 432036 n. 1 adattatore per bombola/bottle adaptor cod. 120133 n. 1 cavo di massa +spina dinse/work cable 25mmq 3 m+dinse plug DX 50cod. 990701 n. 1 kit tubo gas+fascette/gas tube kit+hose ringcod. 712231 n. 1 pinza di massa/ work clamp 300 Acod. 722119 n. 1 riduttore di pressione 2 manometri/2 manometers gas regulator cod. 742427 n. 1 ST26 torcia Tig/ Tig torch 4m 220A n. 1 elettrodo tungsteno ceriato+diffusore / cerium tungsten electrode + diffuser n. 1 elettrodo tungsteno puro / pure tungsten electrode n. 1 ugello+pinza serra elettrodo / nozzle+electrode holder

cod. 432036 n. 1 adattatore per bombola/bottle adaptor cod. 120133 n. 1 cavo di massa +spina dinse/work cable 25mmq 3 m+dinse plug DX 50cod. 990701 n. 1 kit tubo gas+fascette/gas tube kit+hose ringcod. 712231 n. 1 pinza di massa/ work clamp 300 Acod. 722119 n. 1 riduttore di pressione 2 manometri/2 manometers gas regulator cod. 742615 n. 1 ST18A torcia Tig/ Tig torch 4m 350A 5P n. 1 elettrodo tungsteno ceriato+diffusore / cerium tungsten electrode + diffuser n. 1 elettrodo tungsteno puro / pure tungsten electrode n. 1 ugello+pinza serra elettrodo / nozzle+electrode holder

cod. 432036 n. 1 adattatore per bombola/bottle adaptor cod. 120133 n. 1 cavo di massa +spina dinse/work cable 25mmq 3 m+dinse plug DX 50cod. 990701 n. 1 kit tubo gas+fascette/gas tube kit+hose ringcod. 712231 n. 1 pinza di massa/ work clamp 300 Acod. 722119 n. 1 riduttore di pressione 2 manometri/2 manometers gas regulator cod. 742570 n. 1 ST18A torcia Tig/ Tig torch 4m 350A AQUA n. 1 elettrodo tungsteno ceriato+diffusore / cerium tungsten electrode + diffuser n. 1 elettrodo tungsteno puro / pure tungsten electrode n. 1 ugello+pinza serra elettrodo / nozzle+electrode holder

KIT SALDATURA TIG/TIG WELDING KIT x Technology Tig 222, 230, Superior Tig 251, 252

KIT SALDATURA TIG/TIG WELDING KIT x Superior Tig 311, 322, 421, 422

KIT SALDATURA TIG AQUA / AQUA TIG WELDING KIT x Superior Tig 252 AQUA

KIT SALDATURA TIG AQUA / AQUA TIG WELDING KIT x Superior Tig 322 AQUA, 421 AQUA, 422 AQUA

cod. 802788€ 272,00

cod. 802607€ 266,00

cod. 802789€ 286,00

cod. 802637€ 284,00

cod. 802859 - 5 A x Touring 11 cod. 802265 - 7,5 A x Nevada 10, 11, Alpine 13 cod. 802255 - 10 A x Nevada 15, Touring 15, Alpine 15 cod. 802256 - 15 A x Nevada 14, Nevaboost 100, Touring 18, Alpine 18, 30 cod. 802257 - 20 A x Alpine 20, Autotronic 25 cod. 802114 - 30 A x Nevaboost 140 cod. 802258 - 30 A x Computer 48/2, Leader 150, 220 cod. 802259 - 50 A x Alpine 50, Leader 400,Sprinter 3000, Dynamic 320, Digistart 340, Startronic 330 cod. 802260 - 80 A x Sprinter 4000, Dynamic 420, 520 cod. 802029 - 100 A x Sprinter 6000, Dynamic 620, Startronic 530 cod. 802131 - 100 A x Energy 650 cod. 802129 - 300 A x Energy 1000, 1500

KIT 10 pcs

KIT 10 pcs

2,70

2,702,702,702,702,707,00

7,007,007,50

13,0030,00

KIT 20 pcs

KITS & ACCESSORIESACCESSORI CARICABATTERIE/BATTERY CHARGERS ACCESSORIES

ACCESSORI TIG/TIG ACCESSORIES

COMPOSTO DA/CONTENTS:







56 CATALOGO-LISTINO • CATALOGUE-PRICE LIST 01/2016

cod. 801002 (16 mm2 3+2 m) x Nordika 3200, 3250cod. 801000 (10 mm2 3+2 m DX25) x Force 145, 165, 168 MPGE, 195, Tecnica 151/S, Motoinverter 174 CE, Force 170 Tigcod. 801096 (16 mm2 3+2 m DX25) x Advance 187 MV/PFC, 227, Artika 220, 270, Motoinverter 204 CE, Superior 245, Tecnica 171/S, 211/S, 188 MPGE, Technology 186 HD, 216 HD, Eurarc 310, Quality 280, Technomig 215 Dual Synergic, Technomig 223 Treo, Tecnica Tig 160, 190, Technology Tig 182, 185, Supertig 200 cod. 801102 (25 mm2 3+2 m DX25) x Eurarc 322, Technology 236 HD, 238 CE/MPGE, Thunder 220 AC, Motoinverter 254 CE, 264D CEcod. 801081 (25 mm2 4+3 m DX50) x Linear 280, Superior 320 CE, Eurarc 410, 422, Electromig 220, 230, 330 Technomig 225, Technology Tig 222, 230, Superior Tig 311, 251, 252, Supertig280/1cod. 801095 (35 mm2 4+3 m DX50) x Linear 340, 300/S, Thunder 304 CE, 314D CE, Superior Tig 322, Inverpulse 320 (AQUA)cod. 801093 (50 mm2 4+3 m DX50) x Eurarc 522, Linear 430 HD, Superior 400 CE VRD, Superior tig 421, 422, Superior 400 Mig Pack (AQUA)cod. 801106 (70 mm2 4+3 m DX70) x Linear 530 HD, 630 HD, Superior 630 CE VRD, Superior 630 Mig Pack (AQUA), Inverpulse 425, 625

cod. 802666 KIT SCRICCATURA x Linear 340, 300/S, 430 HD, 530 HD, 630 HD, Superior 400 CE, 630 CE GOUGING KIT Superior Mig Pack (AQUA)

KIT SALDATURA MMA - KIT SCRICCATURA /MMA WELDING KIT - GOUGING KIT (completi di: cavo e pinza di massa, cavo e pinza portaelettrodi, maschera, vetri e spazzola/complete with: work cable and clamp, electrode holder, mask, glass and brush)

PINZE PORTAELETTRODO CON CAVO /ELECTRODE HOLDERS WITH CABLE

KIT RUOTE / WHEELS KIT

45,00 45,00 55,00

69,00

110,00

138,00 171,00

234,00

220,00

KIT ALIMENTAZIONE AC/AC POWER SUPPLY KITScod. 802494 X Motoinverter 254 CE, 264D CE

cod. 802584x Motoinverter 204 CE

430,00

410,00

RIDUTTORI DI PRESSIONE • 2 MANOMETRI/GAS REGULATORS • 2 MANOMETERS

cod. 722341 x Force 170 Tig, Tecnica 151/S cod. 722119 x Tecnica 171/S, 211/S, 188 MPGE, Advance 187 MV/PFC, 227 Tig, Technology 186 HD, 216 HD, 236 HD, Technology 238 MPGE, Superior 245, 320, 400, 630, Motoinverter 174 CE, 204 CE, 254 CE, 264D CE, Tecnica Tig 160, Tecnica 190 Tig, Technology Tig 182, 185, 222, 230, Superior Tig, Supertig

6,00

11,00

4,20

2,20

34,00 49,00

CLEANTECH CONSUMABILI/CONSUMABLES

Liquido pulizia/cleaning liquid cod. 322905 3l € 27,00 Strisce fi bra vetro/fi berglass band cod. 980320 10 pcs € 30,00

REMOTE DEVICE

TAVOLA ROTANTE/TURNING TABLE

completo di piastra complete with base Ø 300 mm 230V - 50/60 Hz portata / capacity 10 kg

cod. 802331 € 1.140,00

ACCESSORI MMA/MMA ACCESSORIES

cod. 802810 € 100,00

x Superior Tig 251, 252, Technology Tig 222, 230

UNITA’ PER SALDATURA TIG A CORRENTE PULSATA /TIG PULSE CURRENT UNIT

230,00cod. 802057 x Technology Tig 185, Superior Tig 311, Supertig 280/1

cod. 802675€ 88,00

x Motoinverter 254 CE, 264D CE, Thunder 220 AC

cod. 802680€ 163,00

x Thunder 304 CE, Thunder 314D CE

cod. 802117€ 72,00

cod. 802490€ 78,00

x Motoinverter 174 CE x Motoinverter 204 CE

(completi di: cavo e

T.R. 300

cod. 722981 x ST9V

cod. 722982 x ST9V

cod. 722193x ST17, ST18A, ST26, ST26V

cod. 722192x ST17, ST18A, ST26, ST26V

CAPPUCCIO LUNGO / LONG CAP

CAPPUCCIO CORTO / SHORT CAP

CAVI CON PINZA DI MASSA CABLES WITH EARTH CLAMP

COMANDI A DISTANZA MANUALI/MANUAL REMOTE CONTROLS1 potenziometro/1 potentiometer (USO: Per regolare la corrente di saldatura/USE: To regulate welding current )

cod. 802219 150,00 x Tecnica Tig 160, Technology Tig 182, 185, 222, 230, Superior Tig, Superior 320, 400, 630, Technomig 225, Inverpulse, Supertig 280/12 potenziometri/2 potentiometers(USO: Per regolare la corrente ed il parametro più importante per il tipo di saldatura impostato in macchina / USE: To regulate welding current and the most important parameter according to the welding program set in the machine)

cod. 802336 160,00 x Tecnica Tig 160, Technology Tig 182, 185, 222, 230, Superior Tig, Supertig 280/1, Superior 320, 400, 630, Technomig 225, Inverpulse

COMANDI A DISTANZA A PEDALE/ FOOT REMOTE CONTROLScod. 802017 230,00x Tecnica Tig 160, Technology Tig 182, 185, 222, 230, Superior Tig, Supertig 280/1, Superior 320, 400, 630, Inverpulse 425, 625

cod. 802210 x Turning Table 250,00

cod. 713058 m 2 16 mm2 (DX25) x Force 170 Tig, Tecnica Tig 160, Tecnica 190 Tig, Technology Tig 182, 185, Advance 227 Tig, Supertig 200cod. 713169 m 3 25 mm2 (DX50) x Technology Tig 222, 230, Superior Tig 251, 252, Superior 320 CE, Supertig 280/1cod. 723031 m 3 50 mm2 (DX50) x Superiotig, Superior 400

cod. 713281 16 mm2 3m DX25 x Technomig 215 Dual Synergic, Technomig 223 Treo, Force Tig 170, 25,00 Tecnica Tig 160, 190, Advance 227, Technology Tig 185, 182, Supertig 200

cod. 713282 25 mm2 4m DX50 x Technomig 225 Pulse, Electromig 220, 230, 330, Superior 400, Mig Pack (Aqua), 40,00 Inverpulse 320, 425, 625, Technology Tig 222, 230, Superior Tig, Supertig 280/1

19,00

42,00

63,00

TIG TORCH

TIG TORCH

57CATALOGO-LISTINO • CATALOGUE-PRICE LIST 01/2016 57

TIG CONSUMABLES

TIG

CO

NSU

MA

BIL

I • T

IG C

ON

SU

MA

BLES

TIG CONSUMABLESPRODOTTIPRODUCTS

KIT cod. 801113

KIT cod. 801097

TECNICA TIG 160,TECHNOLOGYTIG 185, 182,SUPERTIG 200

TECHNOLOGY TIG 222, 230

TECHNOMIG225 PULSE, SUPERIOR 320, 400, 630 CE

SUPERIOR TIG 251, SUPERIOR TIG 252 (AQUA)

SUPERIOR TIG INVERPULSE SUPERTIG 280/1,

SUPERIOR TIG 322, 421, 422, INVERPULSE 320, 425, 625, SUPERTIG 280/1

ACCESSORIACCESSORIES

Torce Torches 4m DX25

ST9V 722563 € 94,00

(801097) 742565 € 63,00

(801113)

- - - - - -


-

ST17 742423 € 110,00

Blue line 742460 € 136,00

- - - - -

Torce Torches 4m DX50 - - -

ST26V 742058 € 130,00

- - -


- -

ST26 742614 € 155,00

Green line 742618 POT*

€ 264,00+ device 802810

-

ST26 742614 € 155,00


€ 264,00+ device 802810

ST26 742427 € 150,00Blue line 742463 € 182,00

-

Torce Torches

4m DX50 AQUA - - - -

ST18A 742615 € 166,00


€ 370,00+ device 802810

-

ST18 A 280/1

742426 € 254,00 322, 421,422, 320, 425, 625

742570 € 164,00Blue line

742462 € 294,00

Torce Torches8m DX50

- -

ST26 742616 € 237,00


€ 382,00+ device 802810

-

ST26 742616 € 237,00


€ 382,00+ device 802810

ST26 742431 € 235,00Blue line 742464 € 310,00

-

Torce - Torches8m DX50 AQUA

- - - -

ST18AGreen line

742620 POT*€ 456,00

+ device 802810

-ST18 A

Blue line 320 742497 € 380,00

Elettrodi tungsteno ceriato grigioGrey Cerium Tungsten Electrodes

Ø 1 802220€ 16,00

Ø 1,6 802222€ 28,00

Ø 1 802220 € 16,00Ø 1,6 802222 € 28,00Ø 2,4 802232 € 66,00

Ø 3,2 182, 222, 230 802233 € 115,00

Ø 1 802220 € 16,00

Ø 1,6 802222 € 28,00

Ø 2,4 802232 € 66,00

Ø 1 802220 € 16,00Ø 1,6 802222 € 28,00Ø 2,4 802232 € 66,00Ø 3,2 802233 € 115,00

Elettrodi tungsteno puro verdeGreen Pure Tungsten Electrodes -

182

Ø 1 802234 € 17,00Ø 1,6 802235 € 32,00Ø 2,4 802236 € 70,00

222

Ø 1 802234 € 17,00Ø 1,6 802235 € 32,00Ø 2,4 802236 € 70,00

Ø 3,2 802237 € 126,00Ø 4 802238 € 206,00

-

Ø 1 802234 € 17,00Ø 1,6 802235 € 32,00Ø 2,4 802236 € 70,00Ø 3,2 802237 € 126,00Ø 4 802238 € 206,00

Diffusori elettrodoElectrode Diffusers Ø 1 802226

€ 4,60Ø 1,6 802228

€ 4,60

Ø 1 802249 € 6,80Ø 1,6 802250 € 6,80Ø 2,4 802251 € 6,80

Ø 1 802249 € 6,80Ø 1,6 802250 € 6,80Ø 2,4 802251 € 6,80Ø 3,2 802252 € 6,80Ø 4 802253 € 6,80

Ø 1 802249 € 6,80Ø 1,6 802250 € 6,80Ø 2,4 802251 € 6,80

Ø 1 802249 € 6,80Ø 1,6 802250 € 6,80Ø 2,4 802251 € 6,80Ø 3,2 802252 € 6,80Ø 4 802253 € 6,80

Pinze serra elettrodoElectrode Holders

Ø 1 802223€ 2,20

Ø 1,6 802225€ 2,20

Ø 1 802239 € 3,20Ø 1,6 802240 € 3,20Ø 2,4 802241 € 3,20

Ø 1 802239 € 3,20Ø 1,6 802240 € 3,20Ø 2,4 802241 € 3,20Ø 3,2 802242 € 3,20Ø 4 802243 € 3,20

Ø 1 802239 € 3,20Ø 1,6 802240 € 3,20Ø 2,4 802241 € 3,20

Ø 1 802239 € 3,20Ø 1,6 802240 € 3,20Ø 2,4 802241 € 3,20Ø 3,2 802242 € 3,20Ø 4 802243 € 3,20

Ugelli ceramicoCeramic nozzles

N° 4 802229€ 6,00

N° 5 802230€ 6,00

N° 6 802231€ 6,00

N° 4 802244 € 8,00N° 6 802245 € 8,00N° 7 802246 € 8,00

N° 4 802244 € 8,00N° 6 802245 € 8,00N° 7 802246 € 8,00N° 8 802247 € 8,00

N° 4 802244 € 8,00N° 6 802245 € 8,00N° 7 802246 € 8,00

N° 4 802244 € 8,00N° 6 802245 € 8,00N° 7 802246 € 8,00N° 8 802247 € 8,00N° 10 802248 € 8,00

DC

AC

KIT 10 PCS

KIT 3 PCS

KIT 3 PCS

KIT 10 PCS

KIT 10 PCS

T cod. 8018000088000000088800000000088000000 0

IT cod. 8011

* POT = potenziometro corrente - current potentiometer * AQUA = raffreddata ad acqua / water cooled (p.64)

200/1

630 CE

VERSIONE AQUA/AQUA VERSION


KIT GAS - BOMBOLA A PERDERE / GAS KIT - THROWAWAY BOTTLE

COMPOSTO DA/CONTENTS:cod. 232059 n. 1 fascetta / hose ringcod. 990702 n. 1 kit tubo gas + raccordo / gas tube + connection kitcod. 722120 n. 1 riduttore di pressione / gas regulatorcod. 172462 n. 1 tubo gas 0,2 m / gas tube 0,2 m

KIT GAS - BOMBOLA RICARICABILE / GAS KIT - REFILLABLE BOTTLE

COMPOSTO DA/CONTENTS:cod. 432036 n. 1 adattatore per bombola / gas bottle adaptorcod. 990701 n. 1 kit tubo gas + raccordo + fascette / gas tube + connection + hose rings kitcod. 722341 n. 1 riduttore di pressione / gas regulator

cod. 802032€ 33,00

cod. 802708€ 52,00

KIT ATTACCO BOMBOLA TIPO INDUSTRIALE/INDUSTRIAL TYPE BOTTLE GAS CONNECTION KIT x Bimax, Telmig

COMPOSTO DA/CONTENTS:cod. 990701 n. 1 attacco rapido / connection n. 2 fascette / hose rings n. 1 tubo gas / gas tube

cod. 802067€ 8,40

KIT SALDATURA ACCIAIO/STEEL WELDING KIT BOMBOLA A PERDERE / THROWAWAY BOTTLE x Bimax 132, 152, 162, 4.135, 4.165, 4.195, Technomig 150, 180 (EURO) Dual Synergic, Electromig 220

COMPOSTO DA/CONTENTS:cod. 802132 n. 1 bobina fi lo acciaio / steel wire coil Ø 0,6 kg 0,8cod. 990702 n. 1 kit tubo gas + raccordo / gas tube + connection kitcod. 722019 n. 1 rullino traino / feed roll Ø 0,6÷0,8cod. 722120 n. 1 riduttore di pressione / gas regulatorcod. 722415 n. 10 tubetti di contatto / contact tips Ø 0,6cod. 172462 n. 1 tubo gas 0,2 m / gas tube 0,2 mcod. 722423 n. 2 ugelli conici / conical nozzles

cod. 802147€ 53,00

KIT SALDATURA ACCIAIO/STEEL WELDING KIT BOMBOLA RICARICABILE / REFILLABLE BOTTLE x Bimax 132, 152, 162, 4.135, 4.165, 4.195, Technomig 150, 180 (EURO) Dual Synergic, Electromig 220

COMPOSTO DA/CONTENTS:cod. 432036 n. 1 adattatore per bombola / gas bottle adaptorcod. 802132 n. 1 bobina fi lo acciaio / steel wire coil Ø 0,6 kg 0,8 cod. 990701 n. 1 kit tubo gas + raccordo + fascette / gas tube + connection + hose rings kitcod. 722019 n. 1 rullino traino / feed roll Ø 0,6÷0,8 cod. 722341 n. 1 riduttore di pressione / gas regulator cod. 722415 n. 10 tubetti di contatto / contact tips Ø 0,6cod. 722423 n. 2 ugelli conici / conical nozzles

cod. 802148€ 72,00

KIT SALDATURA ACCIAIO INOX/STAINLESS STEEL WELDING KIT Ø 0,8 mm x Bimax 132, 152, 162, 4.135, 4.165, 4.195, Telmig 150/1, 170/1, 180/2, 195/2, 200/2, 203/2, 250/2, 251/2, 281/2, Mastermig 220/2, Technomig Synergic, Electromig 220, Technomig 223 Treo Synergic

COMPOSTO DA/CONTENTS:cod. 802051 n. 1 bobina fi lo acciaio inox / stainless steel wire coil Ø 0,8 kg 0,5cod. 990703 n. 1 kit aspo / spindle kitcod. 722019 n. 1 rullino traino / feed roll Ø 0,6÷0,8cod. 722416 n. 10 tubetti di contatto / contact tips Ø 0,8 cod. 722423 n. 2 ugelli conici / conical nozzles

cod. 802037€ 39,00

KIT SALDATURA ALLUMINIO/ALUMINIUM WELDING KIT Ø 0,8 mm x Bimax 132, 152, 162, 4.135, 4.165, 4.195, Telmig 150/1, 170/1, 180/2, Technomig 150, 180 Dual Synergic

COMPOSTO DA/CONTENTS:cod. 802062 n. 1 bobina fi lo alluminio / aluminium wire coil Ø 0,8 kg 0,45cod. 990703 n. 1 kit aspo / spindle kitcod. 722019 n. 1 rullino traino / feed roll Ø 0,6÷0,8cod. 722556 n. 10 tubetti di contatto / contact tips Ø 0,8 ALcod. 722423 n. 2 ugelli conici / conical nozzles

cod. 802036€ 50,00

KIT SALDATURA ALLUMINIO/ALUMINIUM WELDING KIT Ø 0,8÷1 mm x Telmig 195/2, 200/2, 203/2, 250/2, 251/2, 281/2, Technomig 180 EURO, 210 Dual Synergic

COMPOSTO DA/CONTENTS:cod. 802062 n. 1 bobina fi lo alluminio / aluminium wire coil Ø 0,8 kg 0,45cod. 722516 n. 1 guaina guidafi lo / linercod. 990703 n. 1 kit aspo / spindle kitcod. 722629 n. 1 rullino traino / feed roll Ø 1 FE/ALcod. 722556 n. 5 tubetti di contatto / contact tips Ø 0,8 AL/FLUXcod. 722552 n. 5 tubetti di contatto / contact tips Ø 1 AL/FLUXcod. 722423 n. 2 ugelli conici / conical nozzles

cod. 802115€ 94,00

COMPOSTO DA/CONTENTS:cod. 722552 n. 3 tubetti di contatto / contact tips Ø 1 AL/FLUXcod. 722553 n. 3 tubetti di contatto / contact tips Ø 1,2 AL/FLUXcod. 722127 n. 1 rullino / feed roll Ø 1÷1,2 ALcod. 722516 n. 1 guaina guidafi lo / liner Ø 1÷1,2

COMPOSTO DA/CONTENTS:cod. 722556 n. 3 tubetti di contatto / contact tips Ø 0,8 AL/FLUXcod. 722552 n. 3 tubetti di contatto / contact tips Ø 1 AL/FLUXcod. 742090 n. 1 rullino / feed roll Ø 0,8÷1 ALcod. 742164 n. 1 guaina guidafi lo / liner Ø 1÷1,2

COMPOSTO DA/CONTENTS:cod. 722552 n. 3 tubetti di contatto / contact tips Ø 1 AL/FLUXcod. 722556 n. 3 tubetti di contatto / contact tips Ø 0,8 AL/FLUXcod. 742304 n. 2 rullino / feed roll Ø 0,8÷1 ALcod. 742164 n. 1 guaina guidafi lo / liner Ø 1÷1,2

KIT SALDATURA ALLUMINIO/ALUMINIUM WELDING KIT Ø 1÷1,2 mm x Mastermig 220/2, 270/2, Technomig 225 Pulse

KIT SALDATURA ALLUMINIO/ALUMINIUM WELDING KIT Ø 0,8÷1 mm x Technomig 215 Dual Synergic, Electromig 220 S ynergic, 230 Wave

KIT SALDATURA ALLUMINIO/ALUMINIUM WELDING KIT Ø 0,8÷1 mm x Technomig 223 Treo Synergic

cod. 802766€ 73,00

cod. 802817€ 94,00

cod. 802836€ 108,00

MIG-MAG ACCESSORIES


KIT SALDATURA FILO ANIMATO/FLUX CORED WIRE WELDING KIT Ø 1÷2,4 mm x Supermig 480 (AQUA), 580 (AQUA), Inverpulse 425 (AQUA), 625 (AQUA), Superior 400 Mig Pack AQUA, Superior 630 Mig Pack (AQUA)

KIT SALDATURA ALLUMINIO/ALUMINIUM WELDING KIT Ø 1÷1,6 mm x Supermig 580 (AQUA), Inverpulse 320 (AQUA), 425 (AQUA), 625 (AQUA), Superior 400 Mig Pack AQUA, Superior 630 Mig Pack (AQUA)

KIT SALDATURA FILO ANIMATO/FLUX CORED WIRE WELDING KIT Ø 1÷1,6 mm x Mastermig 300, 400, 500 (AQUA), Digital Mig 330, Supermig 380, Inverpulse 320 (AQUA), Superior 400 Mig Pack

KIT CHIODATURA/NAIL SPOT WELDING KIT x Telmig 150/1, 170/1, 180/2, 195/2, 200/2, 203/2, 250/2, 251/2, Mastermig 220/2, Technomig 180, 210, 215 Dual Synergic, Electromig 220

KIT SALDATURA ALLUMINIO/ALUMINIUM WELDING KIT Ø 1÷1,6 mm x Mastermig 300, 400, 500 (AQUA), Digital Mig 330, Supermig 380, 480 (AQUA), Superior 400 Mig Pack

COMPOSTO DA/CONTENTS:cod. 722290 n. 1 entrata guidafi lo / wire guide inlet cod. 722814 n. 1 guaina guidafi lo / liner Ø 1,6÷2cod. 722195 n. 2 rullini traino / feed rolls Ø 1,4÷2,4 cod. 722289 n. 2 rullini traino / feed rolls Ø 1÷1,6cod. 722769 n. 3 tubetti di contatto / contact tips Ø 1cod. 722770 n. 3 tubetti di contatto / contact tips Ø 1.2cod. 722771 n. 3 tubetti di contatto / contact tips Ø 1.6cod. 722772 n. 3 tubetti di contatto / contact tips Ø 2cod. 722773 n. 3 tubetti di contatto / contact tips Ø 2.4 cod. 722291 n. 1 tubetto entrata guidafi lo / wire guide inlet tip

cod. 802276€ 114,00

KIT RINVENIMENTO/PLATE TEMPERING KIT x Telmig 195/2, 200/2, 203/2, 250/2, 251/2, 281/2, Digital Mig 330, Mastermig 220/2, 270/2, Electromig 220

COMPOSTO DA /CONTENTS:cod. 712083 n. 10 elettrodi al carbone / carbon electrodescod. 722425 n. 1 dado serraelettrodo / electrode fi xing nutcod. 722442 n. 1 portaelettrodo / electrode holder

cod. 802035€ 15,00

COMPOSTO DA/CONTENTS:cod. 742164 n. 1 guaina guidafi lo / liner Ø 1÷1,2cod. 722597 n. 1 guaina guidafi lo / liner Ø 1.6÷2cod. 742162 n. 1 supporto tubetto contatto/ contact tip holdercod. 722167 n. 2 rullini traino / feed rolls Ø 1÷1,2 AL cod. 722169 n. 2 rullini traino / feed rolls Ø 1,2÷1,6 ALcod. 742159 n. 3 tubetto contatto / contact tips Ø 1cod. 742160 n. 3 tubetto contatto / contact tips Ø 1,2cod. 742161 n. 3 tubetto contatto / contact tips Ø 1,6

cod. 802409€ 186,00

KIT SALDATURA ALLUMINIO/ALUMINIUM WELDING KIT Ø 0,8÷1,2 mm x Inverpulse 320

COMPOSTO DA/CONTENTS:cod. 742164 n. 1 guaina guidafi lo / liner Ø 1÷1,2cod. 742304 n. 2 rullini traino / feed rolls Ø 0,8÷1 AL cod. 722169 n. 2 rullini traino / feed rolls Ø 1,2÷1,6 ALcod. 742466 n. 3 tubetto contatto / contact tips Ø 0,8cod. 742467 n. 3 tubetto contatto / contact tips Ø 1cod. 742468 n. 3 tubetto contatto / contact tips Ø 1,2

cod. 802596€ 140,00

COMPOSTO DA/CONTENTS:cod. 722795 n. 1 guaina guidafi lo / liner Ø 1,2÷1,6cod. 722289 n. 2 rullini traino / feed rolls Ø 1÷1,6 (con ingranaggi / with gear)cod. 722552 n. 3 tubetti di contatto / contact tips Ø 1 cod. 722553 n. 3 tubetti di contatto / contact tips Ø 1,2 cod. 722818 n. 3 tubetti di contatto / contact tips Ø 1,6

cod. 802466€ 60,00

COMPOSTO DA/CONTENTS:cod. 802293 n. 1 kit 100 chiodi /100 nails kit FE/CUcod. 722555 n. 1 estrattore / extractorcod. 722672 n. 2 ugelli puntatura / spot welding nozzles

cod. 802034€ 166,00

GRUPPO CAVI COLLEGAMENTO GENERATORE - TRAINO/CABLES FOR GENERATOR - WIRE FEEDER CONNECTIONcod. 802266 m 4 x Mastermig 300, 400, 500cod. 802267 m 10 x Mastermig 300, 400, 500cod. 802472 m 4 x Supermig 380, TX50 - Superior 400 CE VRD, Superior 400 Mig Pack (AQUA)cod. 802473 m 10 x Supermig 380, TX50 - Superior 400 CE VRD, Superior 400 Mig Pack (AQUA)cod. 802348 m 4 x Supermig 480, 580, Inverpulse 425, 625, Superior 630 CE VRD, Superior 630 Mig Pack, TX50cod. 802349 m 10 x Supermig 480, 580, Inverpulse 425, 625, Superior 630 CE VRD, Superior 630 Mig Pack, TX50cod. 802398 m 4 x Supermig 480 AQUA, 580 AQUA, Inverpulse 425 AQUA, 625 AQUA, Superior Mig Pack AQUAcod. 802399 m 10 x Supermig 480 AQUA, 580 AQUA, Inverpulse 425 AQUA, 625 AQUA, Superior Mig Pack AQUAcod. 802470 m 30 x Supermig 480 AQUA, 580 AQUA, Inverpulse 425 AQUA, 625 AQUA, Superior Mig Pack AQUA

240,00440,00270,00500,00300,00590,00370,00660,00

2.300,00

COMPOSTO DA/CONTENTS:cod. 722516 n. 1 guaina guidafi lo / liner Ø 1÷1,2 ALcod. 722597 n. 1 guaina guidafi lo / liner Ø 1,6÷2 cod. 722167 n. 2 rullini traino / feed rolls Ø 1÷1,2cod. 722169 n. 2 rullini traino / feed rolls Ø 1,2÷1,6cod. 722552 n. 3 tubetti di contatto / contact tips Ø 1 AL/FLUXcod. 722553 n. 3 tubetti di contatto / contact tips Ø 1,2 AL/FLUXcod. 722818 n. 3 tubetti di contatto / contact tips Ø 1,6 ALcod. 990097 n. 1 tubo gas / gas tube 3,3 m

cod. 802273€ 145,00

COMPOSTO DA/CONTENTS:cod. 722552 n. 3 tubetti di contatto / contact tips Ø 1 AL/FLUXcod. 722553 n. 3 tubetti di contatto / contact tips Ø 1,2 AL/FLUXcod. 722167 n. 1 rullino / feed roll Ø 1÷1,2 ALcod. 722516 n. 1 guaina guidafi lo / liner Ø 1÷1,2

KIT SALDATURA ALLUMINIO/ALUMINIUM WELDING KIT Ø 1÷1,2 mm x Electromig 330 Wave

cod. 802663€ 81,00


cod. 722120 € 25,00Riduttore ottone per bombole a perdereBrass gas regulator for throwaway bottles

cod. 722341 € 34,00Riduttore per bombole ricaricabiliGas regulator for refi llable bottles

cod. 722119 € 49,00x Technomig 225, Technomig 223 Treo, Electromig 220, 230, 330 Mastermig 220/2, 270/2, 300, Digital Mig 330, Superior Mig Pack (aqua)

cod. 722346 € 84,00 x Mastermig 400, 500,Supermig, Inverpulse

Riduttori per bombole ricaricabili 2 manometri /Gas regulators for refi llable bottles 2 manometers

Adattatore per bombola/Bottle adaptor

a) cod. 432102 ARGON/CO2 - GB-AU € 7,00

b) cod. 432036 ARGON/CO2 - ITA-USA € 7,70

c) cod. 432160 ARGON/CO2 - DK-N-NL-S-SF € 9,00

d) cod. 432700 ARGON/CO2 - RU-BY € 13,00

a) Bombole a perdere/Throwaway bottles cod. 802038 Bomb./Bottle CO2 L 1 € 23,00 cod. 802048 Bomb./Bottle ARGON /CO2 L 1 € 23,00 cod. 802050 Bomb./Bottle ARGON L 1 € 24,00

a b c d

a

a

b c d

kg 0,8

kg 3

kg 0,8

kg 5

Q.TA’ DI VENDITA PER MULTIPLI DI:Q.TY FOR SALES BY MULTIPLE OF: 2 pcs 6 pcs 12 pcs

Braccio mobile porta torcia Torch holder adjustable arm

x Supermig

x Inverpulse 320 AQUA, Inverpulse 425, 625

x Technomig 223 Treo S.

Kit supporto doppia bombola Two gasbottle holder kit

200mm

ADATTATORE BOBINA COIL ADAPTOR

TRAINO TX 50 WIREFEEDER TX 50

cod. 802486 € 14,00x Mastermig, Supermig, Superior Mig Pack Inverpulse 425, 625

cod. 806110 € 560,00x Superior 400, 630 CE VRD

Kit ruote trainafi lo Wire feeder wheels Kit

x Supermig, Inverpulse, Superior Mig Pack

Kit cavo alimentazione G.R.A. 3000Mains cable kit G.R.A 3000

x Inverpulse AQUA, Superior Mig Pack Aqua

kit amperometro - voltmetroAmpermeter - Voltmeter kitx Supermig 480, 580

kit scheda push pullPush pull board kitx Electromig 230, 330, Inverpulse

KIT PREDISPOSIZIONE BOBINA/COIL ADAPTOR KIT

15 KGcod. 802479€ 130,00x Technomig 225

cod. 802292 € 21,00

cod. 980604 € 35,00

cod. 802290 € 240,00

cod. 803055 € 120,00

cod. 803067 € 140,00

Centralina elettronica Electronic boxoptional “SPOT TIMER”x Mastermig

cod. 980706 € 95,00

cod. 802598€ 90,00

cod. 980559€ 90,00

Copri bobina per trainoWire feeder coil cover x Supermig, Superior Mig Pack Mastermig, Inverpulse

cod. 802595€ 42,00

ANTI STICK SPRAY(No silicone/No silicone)cod. 722000 € 5,30

a) Acciaio Inox - Stainless steel Ø 0,8 kg 0,5 cod. 802051 € 22,00 kg 1 cod. 802061 € 40,00 Alluminio - Aluminium Ø 0,8 kg 0,45 cod. 802062 € 25,00

Ø 1 kg 0,45 cod. 802064 € 23,00 b) Filo animato - Flux cored wire Ø 0,8 kg 0,8 cod. 802208 € 15,00 kg 3 cod. 802181 € 48,00 Ø 0,9 kg 0,8 cod. 802179 € 13,50 kg 3 cod. 802188 € 46,00 Ø 1,2 kg 0,8 cod. 802145 € 15,00 kg 3 cod. 802146 € 50,00 c) Acciaio - Steel Ø 0,6 kg 0,8 cod. 802132 € 7,70 kg 5 cod. 802395 € 38,00 Ø 0,8 kg 0,8 cod. 802133 € 6,60 kg 5 cod. 802396 € 33,00 kg 15 cod. 802682 € 84,00 Ø 1 kg 15 cod. 802683 € 79,00

Ø 1,2 kg 15 cod. 802684 € 73,00 d) Filo per brasatura - Brazing wire Cu Si3 Ø 0,8 kg 0,8 cod. 802495 € 64,00 Cu Al8 Ø 0,8 kg 0,8 cod. 802496 € 64,00 Cu Si3 Ø 0,8 kg 3 cod. 802434 € 218,00

GB/AU IT/USA RU/BYDK/N/NL/S/SF

RIDUTTORI DI PRESSIONE/GAS REGULATORS

ALTRI ACCESSORI/OTHER ACCESSORIES

BOBINE FILO / WIRE COILS ADATTATORI / ADAPTORS

BOMBOLE GAS / GAS BOTTLES

,


Q.T

A’ D

I VEN

DIT

A P

ER M

ULT

IPLI

DI

Q.T

Y FO

R S

ALE

S B

Y M

ULT

IPLE

OF

MIG

-MA

G C

ON

SU

MA

BIL

I • M

IG-M

AG

CO

NSU

MA

BLES

61

MIG-MAG CONSUMABLES

Q.T

A’ D

I VEN

DIT

A P

ER M

ULT

IPLI

DI

Q.T

Y FO

R S

ALE

S B

Y M

ULT

IPLE

OF

MIG-MAG CONSUMABLESPRODOTTIPRODUCTS

BIMAX 105BIMAX 4.135, 4.165,BIMAX 4.195 TURBO,BIMAX 132 TURBO

BIMAX 152, BIMAX 162 TURBO, TECHNOMIG 150 DUAL SYNERGIC

TELMIG 150/1 TECHNOMIG 180 DUAL SYNERGIC


TorceTorches TW120

2 m 742270€ 54,00

TW1602 m 4.135, 4.165, 132

742402 € 56,00

TW1802 m 4.195

742233 € 66,00

TW1602 m 742402

€ 56,00

TW1602 m 742901

€ 56,00

TW1802,5 m 742605

€ 74,00

Tubetti di contattoContact Tips

- Ø 0,6 722415 € 0,76Ø 0,8 722416 € 0,80

Ø 0,6 722415 € 0,76Ø 0,8 722416 € 0,80

Ø 0,6 722415 € 0,76Ø 0,8 722416 € 0,80

Ø 0,6 722415 € 0,76Ø 0,8 722416 € 0,80


Ø 0,8 722667€ 1,00

(x FLUX)

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50

Ø 1,2 4.165, 4.195 722553 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50Ø 1,2 722553 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50Ø 1,2 722553 € 1,50

Ugelli coniciConical Nozzles - 722423

€ 2,10 722423 € 2,10

722423 € 2,10

722423 € 2,10

Ugelli a testa fineThin Headed Nozzles - - T. 150 722151

€ 9,00 722151 € 9,00

722151€ 9,00

Ugelli cilindriciCylindrical Nozzles

722054€ 3,20

722149 € 2,60

722149€ 2,60

722149 € 2,60

722149€ 2,60

Ugelli puntatura chiodiRiveting Nozzles - - T. 150 722672

€ 25,00 722672€ 25,00

722672€ 25,00

Ugelli puntaturaSpot-welding Nozzles - - T. 150 722150

€ 9,00 722150 € 9,00

722150€ 9,00

Guaine guidafiloLiners Ø 0,6÷0,8

722077€ 2,30

Ø 0,6÷0,8 722077

€ 2,30

Ø 0,6÷0,8 722077

€ 2,30

Ø 0,6÷0,8 742412 € 2,00

Ø 0,6÷0,8 742422€ 3,00

LanceTorch Swan Necks 722810

€ 10,00 722078€ 9,00

722078€ 9,00

722078€ 9,00

722078€ 9,00

Molle Springs - 722319

€ 1,00 722319€ 1,00

722319€ 1,00

722319€ 1,00

RulliniFeed Rolls

-Ø 0,6÷0,9

722529€ 2,20

Ø 0,6÷0,9 722529

€ 2,20

Ø 0,6÷0,9 722019

€ 1,70

Ø 0,6÷0,9 722529€ 2,20

- Ø 1 4.165, 4.195 722629 € 5,50

Ø 1 722629 € 5,50

Ø 1 722629€ 5,50

Ø 1 722629€ 5,50

Ø 0,6÷0,9 722529 € 2,20

Ø 0,6÷0,9 722529 € 2,20

Ø 0,9÷1,2 4.165, 4.195 722626 € 2,40

Ø 0,6÷0,9 722529 € 2,20Ø 0,9÷1,2 152, 162 722626 € 2,40

-

Ø 0,6÷0,9 722529 € 2,20

Ø 0,9÷1,2 722626 € 2,40

Fe 3 m

Fe

Al

Flux

Steel

Al/Flux

LEGENDA

LanciaTorch swan neck

Supporto TubettoContact tip holder

Diffusore GasGas diffusor

Tubetto di contatto Contact tip

Ugello / Nozzle

Molla / Spring

1

2

3

4

5

6

1 2 3 4 5

1

1 6 3 4 5

6 4 5 1 3 2 4 5

1 6 3 4 5

ERGIC


Q.T

A’ D

I VEN

DIT

A P

ER M

ULT

IPLI

DI

Q.T

Y FO

R S

ALE

S B

Y M

ULT

IPLE

OF

MIG

-MA

G C

ON

SU

MA

BIL

I • M

IG-M

AG

CO

NSU

MA

BLES

62

MIG-MAG CONSUMABLESPRODOTTIPRODUCTS

TELMIG 170/1, 180/2 TELMIG 281 TELMIG 195/2, 200/2, 203/2, 250/2, 251/2 TURBO

MASTERMIG 220/2 TECHNOMIG 180 EURO, 210 DUAL SYNERGIC

TECHNOMIG 215 DUAL SYNERGIC, ELECTROMIG 220 SYNERGIC


TorceTorches TW180

2,5 m 742405 € 68,00MT25

3 m 742183 € 105,004 m 742184 € 125,00

MT153 m 742180 € 75,004 m 742181 € 90,00

MT153 m 742180 € 75,004 m 742181 € 90,005 m 742182 € 112,00

MT153 m 742180 € 75,004 m 742181 € 90,00

MT153 m 742180 € 75,004 m 742181 € 90,005 m 742182 € 112,00

Tubetti di contattoContact Tips Ø 0,6 722415 € 0,76

Ø 0,8 722416 € 0,80

Ø 0,6 722415 € 0,76Ø 0,8 722680 € 1,50Ø 1 722681 € 1,50

Ø 0,6 722415 € 0,76Ø 0,8 722416 € 0,80Ø 1 722705 € 0,86

Ø 0,6 722415 € 0,76Ø 0,8 722416 € 0,80Ø 1 722705 € 0,86

Ø 0,6 722415 € 0,76Ø 0,8 722416 € 0,80

Ø 1 210 722705 € 0,86

Ø 0,6 722415 € 0,76Ø 0,8 722416 € 0,80Ø 1 722705 € 0,86


Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50

Tubetti di contattoContact Tips - - - - Ø 1,2 722553

€ 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50Ø 1,2 722553 € 1,50

Ugelli coniciConical Nozzles

722423 € 2,10

722685€ 3,70

722423 € 2,10

722423 € 2,10

722423 € 2,10

722423 € 2,10

Ugelli a testa fineThin Headed Nozzles

722151 € 9,00

722686€ 8,60

722151 € 9,00

722151 € 9,00

722151 € 9,00

722151 € 9,00

Ugelli cilindriciCylindrical Nozzles 722149

€ 2,60 722684€ 5,50

722149 € 2,60

722149 € 2,60

722149 € 2,60

722149 € 2,60

Ugelli puntatura chiodiRiveting Nozzles

722672€ 25,00 - 722672

€ 25,00 722672€ 25,00

722672€ 25,00

722672€ 25,00

Ugelli puntaturaSpot-welding Nozzles

722150 € 9,00

722687€ 11,00

722150 € 9,00

722150 € 9,00

722150 € 9,00

722150 € 9,00

Guaine guidafiloLiners

Ø 0,6÷0,8 742413 € 2,00

Ø 0,6÷0,8 722437 € 7,70

Ø 1÷1,2 722689 € 7,70

Ø 0,6÷0,8 722437 € 7,70

Ø 1÷1,2 722689 € 7,70

Ø 0,6÷0,8 722437 € 7,70

Ø 1÷1,2 722689 € 7,70

Ø 0,6÷0,8 722437 € 7,70

Ø 1÷1,2 722689 € 7,70

Ø 0,6÷0,8 722437 € 7,70

Ø 1÷1,2 722689 € 7,70

-Ø 0,6÷0,8 722712

12,00Ø 1÷1,2 722766

€ 13,40

Ø 0,6÷0,8 722712 € 12,00

Ø 1÷1,2 722766 € 13,40

Ø 0,6÷0,8 722712 € 12,00

Ø 1÷1,2 722766 € 13,40

-

Ø 0,6÷0,8 722712 € 12,00

Ø 1÷1,2 722766 € 13,40

-Ø 1÷1,2

722516 € 40,00

Ø 1÷1,2 722516

€ 40,00

Ø 1÷1,2 722516

€ 40,00

Ø 1÷1,2 722516

€ 40,00

Ø 1÷1,2 722516

€ 40,00

LanceTorch Swan Necks 722078

€ 9,00 722696€ 35,00

722305 € 13,60CON DIFFUSORE GAS / SUPPORTO TUBETTO - WITH GAS DIFFUSOR/CONTACT TIP HOLDER

Diffusori gasGas diffusors - 722688

€ 4,00 - - -

Molle Springs

722319€ 1,00

722690€ 2,20

722319€ 1,00

722319€ 1,00

722319€ 1,00

722319€ 1,00

RulliniFeed Rolls Ø 0,6÷0,8

722019 € 1,70

Ø 0,6÷0,8 722019 € 1,70

Ø 1 722629 € 5,50

Ø 0,6÷0,8 722019 € 1,70

Ø 1 722629 € 5,50

Ø 0,6÷0,8 722112 € 12,00

Ø 1 ÷1,2 742054 € 12,00

Ø 0,6÷0,8 210 722019 € 1,70

Ø 0,6÷0,9 180 722529 € 2,20

Ø 0,6÷0,8 722112 € 12,00

Ø 1÷1,2 742054 € 12,00

Ø 1 722629 € 5,50

Ø 1 722629€ 5,50

Ø 1 722629 € 5,50

Ø 0,8÷1 742090 € 19,00

Ø 1÷1,2 722127 € 20,50

Ø 1 722629 € 5,50

Ø 0,8÷1 742090 € 19,00

- - - -

Ø 0,6÷0,9 722529 € 2,20

Ø 0,9÷1,2 722626 € 2,40

Ø 1÷1,6 722130 € 24,00

Fe 3 m

Fe 5 m

Al 3 m

Fe

Al

Flux

Steel

Al

Flux


Q.T

A’ D

I VEN

DIT

A P

ER M

ULT

IPLI

DI

Q.T

Y FO

R S

ALE

S B

Y M

ULT

IPLE

OF

MIG

-MA

G C

ON

SU

MA

BIL

I • M

IG-M

AG

CO

NSU

MA

BLES

63

MIG-MAG CONSUMABLES

Flux

PRODOTTIPRODUCTS

TECHNOMIG 223 TREO SYNERGIC

TECHNOMIG 225 MASTERMIG 270/2,DIGITAL MIG 330, MASTERMIG 300

ELECTROMIG 230, 330 MASTERMIG 400, MASTERMIG 500


TorceTorches

MT15 3 m 742650 € 78,00 3 m 742660 € 78,00 4 m 742181 € 90,00 5 m 742182 € 112,00

MT25 3 m 742183 € 105,00 4 m 742184 € 125,00 5 m 742185 € 140,00

MT25 3 m 742183 € 105,00 4 m 742184 € 125,00 5 m 742185 € 140,00

MT25 3 m 742183 € 105,00

MT363 m 742186 € 160,004 m 742187 € 188,005 m 742188 € 228,00

Tubetti di contattoContact Tips Ø 0,6 722415 € 0,76

Ø 0,8 722416 € 0,80Ø 1 722705 € 0,86

Ø 0,6 722415 € 0,76Ø 0,8 722680 € 1,50 Ø 1 722681 € 1,50

Ø 0,6 722415 € 0,76Ø 0,8 722680 € 1,50 Ø 1 722681 € 1,50Ø 1,2 722682 € 1,40

Ø 0,6 722415 € 0,76Ø 0,8 722680 € 1,50 Ø 1 722681 € 1,50

Ø 1,2 E.330 722682 € 1,40

Ø 0,6 722415 € 0,76Ø 0,8 722680 € 1,50Ø 1 722681 € 1,50Ø 1,2 722682 € 1,40Ø 1,6 722797 € 1,40


Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50Ø 1,2 722553 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50Ø 1,2 M.330, D.M. 330

722553 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50

Ø 1,2 E.330 722553 € 1,50

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50Ø 1,2 722553 € 1,50Ø 1,6 722818 € 1,60


Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50Ø 1,2 722553 € 1,50

Ø 0,8 722556* € 1,50Ø 1 722552* € 1,50Ø 1,2 722553* € 1,50

*NO M. 270/2, D.M. 330

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50Ø 1,2 722553 € 1,50


722423 € 2,10

722685€ 3,70

722685€ 3,70

722685€ 3,70

722792€ 8,20

Ugelli a testa fineThin Headed Nozzles

722151 €9,00

722686€ 8,60

722686€ 8,60

722686€ 8,60

722793 € 14,00

Ugelli cilindriciCylindrical Nozzles

722149 € 2,60

722684€ 5,50

722684€ 5,50

722684€ 5,50 -

Ugelli puntatura chiodiRiveting Nozzles

722672€ 25,00 - - - -

Ugelli puntaturaSpot-welding Nozzles

722150 € 9,00

722687€ 11,00

722687€ 11,00

722687€ 11,00

722794€ 22,00


Ø 0,6÷0,8 722437 € 7,70Ø 1÷1,2 722689 € 7,70

Ø 0,6÷0,8 722437 € 7,70Ø 1÷1,2 722689 € 7,70

Ø 0,6÷0,8 722437 € 7,70Ø 1÷1,2 722689 € 7,70

Ø 0,6÷0,8 722437 € 7,70Ø 1÷1,2 722689 € 7,70Ø 1,2÷1,6 722795 € 8,40

Ø 0,6÷0,8 722712 € 12,00Ø 1÷1,2 722766 € 13,40

Ø 0,6÷0,8 722712 € 12,00Ø 1÷1,2 722766 € 13,40

Ø 0,6÷0,8 722712 € 12,00Ø 1÷1,2 722766 € 13,40

Ø 0,6÷0,8 722712 € 12,00Ø 1÷1,2 722766 € 13,40Ø 1,2÷1,6 722796 € 11,00

Ø 1÷1,2 722516 € 40,00Ø 1÷1,2

722516 € 40,00Ø 1÷1,2

722516 € 40,00

Ø 1÷1,2 722516 € 40,00

Ø 1,2÷1,6 722597 € 33,00

LanceTorch Swan Necks

722305 € 13,60CON DIFFUSORE GAS SUPPORTO TUBETTO/WITH GAS DIFFUSOR-CONTACT TIP HOLDER

722696€ 35,00

722696€ 35,00

722696€ 35,00

722788€ 95,00

Molle Springs

722319€ 1,00

722690€ 2,20

722690€ 2,20

722690€ 2,20 -

Diffusori gasGas diffusors - 722688

€ 4,00 722688€ 4,00

722688€ 4,00

722791 € 3,70

Supporti tubettoContact Tip Holders - - - - 722789

€ 5,60

RulliniFeed Rolls

Ø 0,6÷0,8 722112 € 12,00

Ø 0,6÷0,8 722225 € 12,00

Ø 1÷1,2 742366 € 12,00

Ø 0,6÷0,8 722112 € 12,00

Ø 1÷1,2 742054 € 12,00

M.270/2 Ø 0,6÷0,8 722112 € 12,00Ø 1÷1,2 742054 € 12,00

M.300, D.M. 330 Ø 0,6÷0,8 722225 € 12,00Ø 1÷1,2 742366 € 12,00

E. 230 Ø 0,6÷0,8 722112 € 12,00Ø 1÷1,2 742054 € 12,00

E. 330 Ø 0,6÷0,8 722225 € 12,00Ø 1÷1,2 742366 € 12,00

Ø 0,6÷0,8 722225 € 12,00Ø 0,8÷1 722227 € 15,00Ø 1÷1,2 742366 € 12,00Ø 1,2÷1,6 722241 € 12,00

Ø 0,8÷1 742304 € 15,60

Ø 0,8÷1 742090 € 19,00

Ø 1÷1,2 722127 € 20,50

M.270/2 Ø 0,8÷1 742090 € 19,00

M.300, D.M. 330 Ø 0,8÷1 742304 € 15,60Ø 1÷1,2 722167 € 14,00

E. 230 Ø 0,8÷1 742090 € 19,00

E. 330 Ø 0,8÷1 742304 € 15,60Ø 1÷1,2 722167 € 14,00

Ø 0,8÷1 742304 € 15,60Ø 1÷1,2 722167 € 14,00Ø 1,2÷1,6 722169 € 14,00

Ø 1÷1,6 722289 € 18,00

Ø 1÷1,6 722130 € 24,00

Ø 1÷1,6 M.330 722289 € 18,00

Ø 1÷1,6 E. 230 722130 € 24,00 E. 330 722289 € 18,00

Ø 1÷1,6 722289 € 18,00Ø 1,4÷2,4 500 722195 € 18,30

Fe 3 m

Fe 5 m

Al 3 m

Fe

Al

Steel

Al

Flux

MASTERMI

MT25

RGIC


Q.T

A’ D

I VEN

DIT

A P

ER M

ULT

IPLI

DI

Q.T

Y FO

R S

ALE

S B

Y M

ULT

IPLE

OF

MIG

-MA

G C

ON

SU

MA

BIL

I • M

IG-M

AG

CO

NSU

MA

BLES

64

MIG-MAG CONSUMABLES

*AQUA = RAFFREDDATA AD ACQUA /WATER COOLED

PRODOTTIPRODUCTS

SUPERMIG 380, 480,SUPERIOR 400 MIG PACK

INVERPULSE 320 INVERPULSE 425, 625, SUPERIOR 630 MIG PACK, SUPERMIG 580

AQUA VERSION*INVERPULSE 320, 425, 625, MASTERMIG 500, SUPERMIG 480, 580, SUPERIOR MIG PACK

SPOOL GUN M6

SPOOL GUN K4ACCESSORI

ACCESSORIES

TorceTorches

MT363 m 742186 € 160,004 m 742187 € 188,005 m 742188 € 228,00

MT403 m 722798 € 270,005 m 722800 € 390,00

MT5003 m AQUA 722625 € 254,005 m AQUA 722683 € 310,00

M6 802407 € 440,00 K4 802630 € 320,00


Ø 0,6 722415 € 0,76Ø 0,8 722680 € 1,50Ø 1 722681 € 1,50Ø 1,2 722682 € 1,40Ø 1,6 722797 € 1,40 NO INV. 320

Ø 0,8 722581 € 2,00Ø 1 722582 € 2,00Ø 1,2 722583 € 2,00Ø 1,6 722587 € 2,00

M6Ø 0,6 722415 € 0,76Ø 0,8 722416 € 0,80


Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50Ø 1,2 722553 € 1,50Ø 1,6 722818 € 1,60

Ø 0,8 742466 € 1,70Ø 1 742467 € 1,70Ø 1,2 742468 € 1,80

Ø 1 742159 € 3,60Ø 1,2 742160 € 3,60Ø 1,6 742161 € 3,20 NO INV. 320Ø 2 722772 € 1,80 NO INV. 320

Ø 0,8 722556 € 1,50Ø 1 722552 € 1,50

Tubetti di contattoContact Tips Ø 1 722552 € 1,50

Ø 1,2 722553 € 1,50

Ø 1 722769 € 1,60Ø 1,2 722770 € 1,70Ø 1,6 722771 € 1,60Ø 2 722772 € 1,80

-


722792€ 8,20

722808€ 15,60

722585€ 8,20

722423€ 2,10

Ugelli cilincriciCylindrical Nozzles - 722809

€ 14,00 722595€ 7,70

722149€ 2,60

Ugelli a testa fineThin Headed Nozzles 722793

€ 14,00 - - 722151€ 9,00

Ugelli puntaturaSpot-welding Nozzles 722794

€ 22,00 - 722594€ 21,00

-


Ø 0,6÷0,8 722437 € 7,70Ø 1÷1,2 722689 € 7,70Ø 1,2÷1,6 722795 € 8,40

Ø 0,6÷0,8 722437 € 7,70Ø 1÷1,2 722689 € 7,70

Ø 1÷1,2 722689 € 7,70Ø 1,2÷1,6 722795 € 8,40

Ø 1÷1,2 722590 € 10,00Ø 1,2÷1,6 722588

€ 8,40 NO INV. 320-

Ø 0,6÷0,8 722712 € 12,00Ø 1÷1,2 722766 € 13,40Ø 1,2÷1,6 722796 € 11,00

Ø 0,6÷0,8 722712 € 12,00Ø 1÷1,2 722766 € 13,40

Ø 1÷1,2 722766 € 13,40Ø 1,2÷1,6 722796 € 11,00

Ø 1÷1,2 722780 € 11,00Ø 1,2÷1,6 722767

€ 11,00 NO INV. 320-

Ø 1÷1,2 722516 € 40,00Ø 1,2÷1,6 722597 € 33,00 Ø 1÷1,2 742164 € 61,00

Ø 1÷1,2 742164 € 61,00Ø 1,2÷1,6 722597 € 33,00

Ø 1÷1,2 742164 € 61,00Ø 1,2÷1,6 722597

€ 33,00 NO INV. 320-

LanceTorch Swan Necks

722788€ 95,00

722801€ 150,00

722708€ 100,00

M6 990662 € 41,00 K4 980942 € 26,50

Molle Springs

- - - 722319€ 1,00

Diffusori gasGas diffusors

722791 € 3,70

722802€ 5,20

722593€ 5,00

-

Supporti tubettoContact Tip Holders

722789 € 5,60

722807€ 12,00

722709€ 5,50

-

RulliniFeed Rolls

Ø 0,6÷0,8 722225 € 12,00Ø 0,8÷1 722227 € 15,00Ø 1÷1,2 742366 € 12,00Ø 1,2÷1,6 722241 € 12,00

Ø 0,6÷0,8 722225 € 12,00Ø 0,8÷1 722227 € 15,00Ø 1÷1,2 742366 € 12,00

Ø 0,6÷0,8 722225 € 12,00Ø 0,8÷1 722227 € 15,00Ø 1÷1,2 742366 € 12,00Ø 1,2÷1,6 722241 € 12,00 NO INV. 320

Ø 0,6÷0,8 M6 742191€ 11,00

Ø 0,8÷1 742304 € 15,60Ø 1÷1,2 722167 € 14,00Ø 1,2÷1,6 722169 € 14,00

Ø 0,8÷1 742304 € 15,60Ø 1÷1,2 722167 € 14,00

Ø 0,8÷1 742304 € 15,60Ø 1÷1,2 722167 € 14,00Ø 1,2÷1,6 722169 € 14,00 NO INV. 320

Ø 0,8÷1 M6 742193 € 8,60

Ø 0,8÷0,9 K4 742519€ 5,00

Ø 1÷1,2 K4 742520 €5,00

Ø 1÷1,6 722289 € 18,00Ø 1,4÷2,4 480, 500 722195 € 18,30

Ø 1÷1,6 722289 € 18,00Ø 1÷1,6 722289 € 18,00Ø 1,4÷2,4 722195 € 18,30 NO INV. 320

Fe

Al

Flux

Fe 3 m

Fe 5 m

Al 3 m

Steel

Al

Flux

K4

M6


Q.T

A’ D

I VEN

DIT

A P

ER M

ULT

IPLI

DI

Q.T

Y FO

R S

ALE

S B

Y M

ULT

IPLE

OF

PLA

SM

A C

ON

SU

MA

BIL

I • P

LA

SM

A C

ON

SU

MA

BLES

65

PLASMA CONSUMABLESPRODOTTIPRODUCTS

TECNICA PLASMA 31,TECHNOLOGY PLASMA 41

TECHNOLOGY PLASMA 54 K

SUPERIOR PLASMA 60, SUPERPLASMA 83 HF

SUPERIOR PLASMA 90, ENTERPRISE PLASMA 160, SUPERPLASMA 130 HF

SUPERIOR PLASMA 160


TorceTorches

4 m 742237€ 272,00

4 m 742381€ 272,00

6 m 60 742040 € 294,00

6 m 83 HF 722474 € 246,00

6 m 722332€ 400,00

12 m 722333€ 700,00

PS6 m 802867

€ 600,0012 m 742635

€ 600,00

TorceTorches - - - 12 m 722334

€ 830,00 -

Schermi scriccaturaGouging shields - - - - 802928

€ 80,00

Ugelli scriccaturaGouging nozzles - - - - 802929

€ 60,00

Ugelli Nozzles 802423

€ 13,00 802423€ 13,00

802077€ 9,00

Ø 1,3 802119 € 16,50

Ø 1,6 802124€ 16,50

80A 802930 € 44,00100A 802931 € 44,00120A 802932 € 44,00

ElettrodiElectrodes 802420

€ 14,00 802420€ 14,00

802076€ 14,00

802122€ 16,00

802898€ 33,00

Ugelli prolungati Long nozzles 802429

€ 16,80 - 802079€ 13,00

802083€ 43,00 -

Elettrodi prolungatiLong electrodes 802428

€ 18,00 - 802078€ 16,00

802082€ 29,00 -

Puntali Torcia

Torch Safety Caps 802425€ 25,00

802485€ 26,40

802081€ 20,00

802126€ 58,20

802933€ 110,00

DistanzialiSpacers

- - 802128€ 7,00

802127€ 10,00

802934€ 44,00

Diffusori isolantiInsulation Diffusors 802422

€ 50,00 802080€ 22,00

802123€ 46,60

802899€ 46,00

Diffusori ottoneBrass Diffusors - - - 802121

€ 21,00 -

Tubetti raffreddamentoCooling pipes

- - - - 802897€ 25,00

Anello OROR Ring - - - 802120

€ 4,60 -

Guide magneticheMagnetic guides 802143

€ 20,00 -

Unità circolari di taglioCircular cutting units

802214 € 55,00 - - -

- - 802218€ 182,00

802211€ 180,00 -

KIT 5 PCS

KIT 3 PCS

KIT 5 PCS

KIT 5 PCS

KIT 5 PCS

KIT 5 PCS

KIT 5 PCS

KIT 5 PCS

KIT 10 PCS

KIT 5 PCS

KIT 2 PCS


cod. 802043€ 640,00

cod. 802401€ 900,00

cod. 802402€ 580,00

cod. 802695€ 15,00

cod. 802109€ 750,00

cod. 802497€ 970,00

cod. 802640€ 820,00

cod. 802790€ 600,00

CARRELLI/TROLLEYS

G.R.A. WATER COOLING SYSTEMS AUTOTRANSFORMERS (3ph)

STRUMENTAZIONE / INSTRUMENTATION

PINZE DI SALDATURA PER AUTOMOTIVE / AUTOMOTIVE WELDING CLAMPS

ACCESSORI PER / ACCESSORIES FOR SMART INDUCTOR 5000

x PTE, PCP, Supertig 280/1, Mastermig 500 x Inverpulse,

Superior 630 Mig Packx Superior 400 Mig Pack,Superior Tig 322, 421, 422

x Superior Tig 252

G.R.A. 901 ph 230V

G.R.A. 25001 ph 230V

G.R.A. 30001 ph 230V

G.R.A. 40001 ph 230V

G.R.A. 40001 ph 230V

G.R.A. 45001 ph 230V

x Supermig 480,580

STRUMENTAZIONE PER OPERAZIONI DI ASSISTENZA E MANUTENZIONE INVERTERINSTRUMENTATION FOR ASSISTANCE AND MAINTENANCE WORK - INVERTER

cod. 802627 € 125,00 cod. 802586 € 70,00

kit 5 pinze per carrozzeria kit 5 clamps for car body shop

kit 6 pinze per carrozzeria kit 6 clamps for car body shopkit 6 i ikit 5 i i

1 ATT 150 (208V-230V 400V 15kVA) x Superior Tig 322, 421, 422

cod. 802685 € 560,00

2 ATT 300 (208V-230V 400V 27kVA) x Inverpulse 320, 425, 625

cod. 802681 € 760,00

OscilloscopioOscilloscope

AUTOTRASFORMATORIAUTOTRANSFORMERS

Leva / LeverHeat Twister

Consumabili per /Consumables for Heat Twister:

Super Remover

Ventosa Suction cup

Comando a distanza a pedale / Foot remote control

Kit Strisce Fibravetro Fiberglass bands kit

Pad Inductor

1pz/pccod. 321031

€ 4,00

cod. 801412 € 300,00

cod. 801400 € 290,00

cod. 801403 € 340,00

cod. 801402 € 230,00

Variac 1ph Jump Start Checkx Speed Start, Pro Start

cod. 802110 € 1.700,00 x Tecnica, Technology, Superior

cod. 802111 - 60A € 1.800,00 x Tecnica Plasma, Technology Plasma,

Superior Plasma 60 HF

Carico Statico / Dummy load

Metal Releaser

cod. 801401 € 240,00

cod 801401d 801401

aat Twister

cod. 801412€ 300,00

ction cupWonder Pen II

Prolunga/Extension

cod. 801420 € 290,00

cod. 801421€ 55,00 cod. 801406

€ 8,50cod. 981147

€ 44,00

Prolunga/Extension

/ Glass Genius

SPOT WELDING

10 pcs 25x50mmcod. 981161 € 76,0010 pcs 50x150mmcod. 981160 € 70,00

x Inverpulse320, 425, 625

x Superior Tig 322, 421, 422

x Superior 400, 630 Mig Pack, Technomig 215, Electromig 220

x Superior Tig 322, 421, 422, Technomig 215, Electromig 220

x Technomig 150, 180 (EURO), 210 Dual S., Superior Tig 251, 252, Tech. Tig 222, 230

x Technomig 150, 180 (EURO), 210 DS, Tech. Tig 222, 230,Superior Tig 251,252, Digital Puller, Digital Car Spotter, Digital Spotter 7000

x Superior 630 CE VRD

cod. 803071€ 500,00

cod. 803072€ 410,00

cod. 803076€ 360,00

cod. 803073€ 200,00

cod. 803059€ 196,00

cod. 803074€ 120,00

cod. 803064€ 160,00

cod. 803051€ 280,00

x Inverter professionali

Professional inverters

UNIVERSAL MONDIAL NATIONAL EUROPA ARCTIC CONTINENTALAMERICA

MAX20 l4m3

MAX20 l4m3

cod. 803002€ 160,00

x Alucar, Aluspotter, Digital Puller, Digital Car Spotter, Startronic, Smart Inductor

cod. 802€ 15 0

x Speed Start, Pro

Verticale/Vertical: kit 2 Twister 10V M8/M10 cod. 801413 € 48,00 kit 2 Twister 14V M12/M14 cod. 801414 € 50,00 kit 2 Twister 18V M16/M18 cod. 801415 € 52,00

Orrizzontale/Horizontal: kit 2 Twister 10H M8/M10 cod. 801416 € 52,00 kit 2 Twister 14H M12/M14 cod. 801417 € 55,00 kit 2 Twister 18H M16/M18 cod. 801418 € 55,00

/M10 48,00

/ote control

d 981147

AX0 lm3

KIT FILO PER TWISTER KIT WIRES FOR TWISTER 2 pz./pcscod. 801419 € 45,00


ACCESSORI PER STUDDER / STUDDER ACCESSORIES

cod. 802690 Dent Pulling boxcod. 802838 Dent Pulling consumables kitcod. 143593 Studder box cod. 143722 Studder ready boxcod. 981649 Studder gun cod. 981650 Studder gun touch cod. 713277 cavo e pinza di massa / work cable and clamp 95mm2 1,5 mcod. 482397 morsetto di massa / work terminalcod. 990354 kit fi ssaggio massa / work clamp fi xing kitcod. 722952 estrattore / extractorcod. 484244 leva / lever 210mmcod. 484635 leva / lever 410mmcod. 722953 mandrino per chiodi / mandrel for nails Ø 2-2,5cod. 722954 mandrino per rondelle speciali / mandrel for special washerscod. 722955 mandrino a gancio per rondelle / hookmandrel for washerscod. 722958 elettrodo perni fi lettati M4 e chiodi / threaded studs electrode M4 and nails Ø 2-2,5cod. 722959 elettrodo perni fi lettati / threaded studs electrode M5-M6cod. 742484 elettrodo per rondelle / electrode for washers Ø 8x16cod. 742541 elettrodo per rondelle asolate / electrode for washers Ø 8x16cod. 742485 elettrodo per puntatura / spot-welding electrodecod. 722963 elettrodo schiacciatura / squeezing electrodecod. 722964 elettrodo per rappezzatura / patching electrodicod. 742486 elettrodo per puntatura chiodi / spot-welding electrodecod. 802608 kit 5 elettrodi carbone / carbon electrodes 150 mmcod. 802728 kit 50 fi li ondulati / corrugated wires Ø 2 200mmcod. 802296 kit 100 rondelle speciali / special washers Fe-Cucod. 802295 kit 100 rondelle / washers Fe-Cu Ø 8x16cod. 802943 kit 50 rondelle asolate dritte / straight hook washers cod. 802944 kit 50 rondelle asolate piegate / bended hook washers cod. 802297 kit 100 ribattini lisci / plain rivets Fe-Cu Ø 3x3,2cod. 802298 kit 100 ribattini lisci / plain rivets Fe-Cu Ø 3x4,5cod. 802299 kit 100 ribattini / plain rivets Fe-Cu Ø 5x10cod. 802301 kit 100 ribattini fi lettati / threaded rivets Fe-Cu M5x18cod. 802300 kit 100 ribattini fi lettati / threaded rivets Fe-Cu M4x15cod. 802302 kit 100 ribattini autofi lettati / self-threaded rivets Fe-Cu Ø 5x12cod. 802303 kit 100 ribattini autofi lettati / self-threaded rivets Fe-Cu Ø 5x18cod. 802304 kit 100 ribattini autofi lettati / self-threaded rivets Fe-Cu Ø 5x25cod. 802293 kit 100 chiodi / nails Fe-Cu Ø 2x50cod. 802294 kit 100 chiodi / nails Fe-Cu Ø 2,5x50cod. 802339 kit 50 fi li ondulati / corrugated wires Ø 2 300mm

KIT RAPID SPOT

testa fi ne / thin headedcod. 802463 € 15,00

testa media / medium headedcod. 802464 € 15,00

KIT MAXI EXTRACTOR

cod. 802451 € 60,00

ELETTRODI /ELECTRODES (kit 5 pcs)

cod. 802461 € 28,00

Posizionatore per fi lo ondulatoPositioner for corrugated wirecod. 742087 € 32,00

Massa a puntarePointing masscod. 802462 € 8,20

64,0053,0075,0042,00

180,00188,0069,008,009,00

35,00

3,504,00

72,008,00

11,2018,0012,0013,0024,0010,007,00

30,0013,006,30

20,0034,005,50

14,0017,006,006,009,00

11,008,20

11,0011,0012,005,007,50

25,00

KIT MULTILEVER

PULL SYSTEM

TRACTION BAR

cod. 802442 € 410,00

cod. 802443€ 260,00

cod. 802657€ 540,00

prolunga leva/lever extensioncod. 742317 € 38,00

ELETTRODI/ELECTRODEScod. 802445 testa tonda /round headed (kit 5 pcs) € 58,00

cod. 802444 testa a punta / tip headed (kit 5 pcs) € 75,00

cod. 742331 per schiacciatura for squeezing € 8,00

EXTRACTOR

cod. 722952 € 35,00

ACCESSORI PER/ACCESSORIES FOR DIGITAL CAR PULLER/SPOTTER

TRACTION BAR cod

€

OPTIONAL BAR1,5m

cod. 802815 € 120,00

DENT PULLING CONSUMABLES KITcod. 802838

STUDDER BOXcod. 143593

STUDDER READY BOXcod. 143722

DENT PULLING BOXcod. 802690

DENT PULLING

70mmDISTANZIALESPACER cod. 981707€ 150,OO


cod. 143651 Aluspotter boxcod. 802839 Alurepair box M5-M6cod. 990773 cavo di puntatura con pistola / spot-welding cable with gun x Aluspottercod. 120541 cavo massa / work cable 25mm2 2 m cod. 712231 pinza di massa / work clamp 250cod. 722952 estrattore / extractor

cod. 484635 leva / lever 410mmcod. 742316 chiave a tubo / socket wrenchcod. 742269 elettrodo porta perni / studholder electrode M8cod. 802750 kit 100 perni fi lettati / threaded studs Al M3 x 12cod. 742312 elettrodo porta perni / studholder electrode M3 cod. 742313 elettrodo porta perni / studholder electrode M4cod. 742314 elettrodo porta perni / studholder electrode M5cod. 742315 elettrodo porta perni / studholder electrode M6cod. 802725 kit 100 perni fi lettati / threaded studs Al M8 x 20cod. 802751 kit 100 perni fi lettati / threaded studs Al M4 x 16cod. 802752 kit 100 perni fi lettati / threaded studs Al M5 x 20cod. 802753 kit 100 perni fi lettati / threaded studs Al M6 x 20cod. 802756 kit 100 perni lisci / studs Al Ø 5 x 16cod. 802757 kit 100 faston / faston Al Ø 6,3 x 0,8cod. 802759 kit 100 perni fi lettati / threaded studs Fe-Cu M5 x 16cod. 802761 kit 100 perni lisci /studs Fe-Cu Ø 5 x 16cod. 802829 kit 10 anelli con boccola / kit 10 rings with bush M4cod. 802830 kit 10 anelli con boccola / kit 10 rings with bush M5cod. 802831 kit 10 anelli con boccola / kit 10 rings with bush M6

200,00110,00180,0019,002,20

35,00

4,004,40

25,0013,4022,2022,4022,4022,4046,0016,0022,0024,0033,0033,0013,0016,0012,0012,0012,00

cod. 802599€ 120,00

cod. 802433€ 390,00

MULTIGANCI / MULTIHOOKS

COMPACT PULLER Completo di ganci / Complete with hooks

PULLING BAR GLUE

PULLER KIT

cod. 742481 € 12,00

cod. 742482 € 21,00

HOOKS

10 pinscod. 802696

€ 65,00

8 pinscod. 802691

€ 60,00

6 pinscod. 802692

€ 33,00

3 pinscod. 742283

€ 26,00

cod. 802660 € 320,00

Colla / Glue kit (kit 10 pcs):

cod. 802735 € 13,00

Ventose / Sucker kit (kit 10 pcs):

Ø 11 mm cod. 802641 € 36,00Ø 16 mm cod. 802642 € 37,00Ø 21 mm cod. 802643 € 38,00Ø 32 mm cod. 802644 € 41,00

Testina per ventosa / Sucker head M10 cod. 742528 € 49,00Adattatore / Adapter M10-M14 cod. 742529 € 4,40Cuneo per bolli / Wedge cod. 322956 € 22,00Spatola / Spatula cod. 322955 € 4,00

ACCESSORI PER / ACCESSORIES FOR ALUCAR & ALUSPOTTER PULLER & STARTER STATION

PULLER STATIONcod. 803095 € 514,00

kit 6 ganci / hooks

cod. 803507 € 17,00

STEEL STARTERSTATION

cod. 802854€ 550,00

Completa di / Complete with:803074 Trolley AMERICA802690 Dent Pulling Box802433 Pulling Bar

ALU STARTERSTATION

cod. 802853€ 250,00

Completa di / Complete with:803074 Trolley AMERICA802599 Compact Puller

PULLER STATION COMBO STEEL

GENERATOR NOT INCLUDED!

GENERATORS NOT INCLUDED!

GENERATORS NOT INCLUDED!

GENERATOR NOT INCLUDED!

cod. 802850€ 1.700,00

Completa di / Complete with:803095 Puller Station Trolley802442 Kit Multilever802443 Pull System802690 Dent Pulling Box802433 Pulling Bar

PU

PULLER STATION COMBO ALU & STEEL DELUXE

cod. 802851€ 2.100,00

Completa di / Complete with:803095 Puller station Trolley802657 Traction Bar802442 Kit Multilever802443 Pull System802461 Kit Rapid Spot802690 Dent Pulling Box802691 Multihooks 8 pins802692 Multihooks 6 pins802599 Compact Puller

PUCS

ALUSPOTTER BOXcod. 143651

ALUREPAIR BOX M5 - M6cod. 802839

ALUScod.

ALUcod

A

c

N

STE

GNO

OPTIONAL BAR1,5m

cod. 802815 € 120,00

70mmDISTANZIALESPACER cod. 981707€ 150,OO


PINZE PNEUMATICHE + CAVI/PNEUMATIC GUNS + CABLES

PINZE MANUALI + CAVI/MANUAL GUNS + CABLES

PINZA “C”/“C” GUNx Spotter 5500, 7000, 9000 (AQUA), Inverspotter 12000

cavi/cables: Ø 120 mm2

x Spotter 7000, 9000cavi/cables: Ø 150 mm2

x Spotter 9000 AQUAcavi/cables: 5 m x Inverspotter 14000

cod. 801041

€ 360,00

cod. 801048 € 720,00 cod. 801086 € 1.250,00 cod. 801063 € 3.000,00 cod. 801064 € 4.500,00

“C“ GUN

PINZA MANUALE/MANUAL GUNx Spotter 5500, 7000, 9000 (AQUA), Inverspotter 12000

cod. 801043

€ 620,00

PINZA DOPPIO PUNTODOUBLE SPOT GUNx Spotter 9000 (AQUA), Inverspotter 12000

cod. 801052

€ 830,00

cod. 803045€ 690,00

SERIE BRACCI COMPLETA/ARMS RANGE KIT

x pinza/gun 801048 Modular, Digital Modular

1

2

3

4

5

BRACCI ED ELETTRODI/ARMS AND ELECTRODES x cod. 801048 (Spotter 7000, 9000), x cod. 801086 (Spotter 9000 AQUA), x cod. 801063 (Inverspotter 13000), x DIGITAL MODULAR, MODULAR 20/TI

COPPIE BRACCI/ARMS PAIR

cod. 803151 XA1 coppia br. diritti con elettrodi / straight arm pair with electrodes L=120 mmcod. 803152 XA6 coppia br. diritti con elettrodi / straight arm pair with electrodes L=250 mmcod. 803156 XA9 coppia br. sagomati con elettrodi / shaped arm pair with electrodes L=500 mmcod. 803158 XA3 coppia br. diritti con elettrodi per profi li esterni / straight arm pair with electrodes for external profi lescod. 803159 XA5 coppia br. diritti con elettrodi per profi li interni / straight arm pair with electrodes for external profi lescod. 803150 XA2 coppia br. diritti con elettrodi inclinati / straight arm pair with bent electrodes L=120 mmcod. 803153 XA7 coppia br. diritti con elettrodi inclinati / straight arm pair with bent electrodes L=350 mmcod. 803154 XA8 coppia br. sagomati con elettrodi / shaped arm pair with electrodes L=350 mmcod. 803155 XA4 coppia br. con elettrodi a pinza / arm pair with clamp-electrodes L=120 mm

ELETTRODI/ELECTRODES

cod. 690050 elettrodo diritto / straight electrode L= 50 mmcod. 690049 elettrodo diritto / straight electrode L=100 mmcod. 690047 elettrodo diritto / straight electrode L=130 mmcod. 690048 elettrodo diritto / straight electrode L=195 mmcod. 690046 elettrodo diritto / straight electrode L=215 mmcod. 690052 elettrodo sagomato per profi li / shaped electrode for profi les cod. 690076 elettrodo sagomato per profi li / shaped electrode for profi les cod. 690051 elettrodo a pinza / clamp electrode

BRACCI SINGOLI/LOOSE ARMS

cod. 690044 braccio diritto / straight arm L= 85 mmcod. 690005 braccio diritto / straight arm L=120 mmcod. 690040 braccio diritto / straight arm L=120 mmcod. 690013 braccio diritto / straight arm L=250 mmcod. 690041 braccio diritto / straight arm L=350 mmcod. 690015 braccio diritto / straight arm L=500 mmcod. 690018 braccio sagomato / shaped arm L=500 mmcod. 690043 braccio prof. interni / arm for internal profi les L=140 mmcod. 690045 braccio prof. interni / arm for internal profi les L=100 mmcod. 690042 braccio sagomato / shaped arm L=350 mm

66,00130,00230,0082,00

164,0078,00

160,00160,0092,00

4,607,70

10,5015,0016,5014,5020,0016,00

24,0026,0030,0053,0066,0093,00

105,0077,0025,0072,00

cavi/cables: 5 m x Inverspotter 13000, 13500 Smart, 14000

“X“ GUN

COMPOSTA DA/CONTENTS:1-cod. 803152 XA6 L=250 mm2-cod. 803153 XA7 L=350 mm3-cod. 803155 XA4 L=120 mm4-cod. 803156 XA9 L=500 mm5-cod. 803158 XA3 L=120 mm

ACCESSORI PUNTATRICI/SPOT WELDING ACCESSORIES


BRACCI ED ELETTRODI/ARMS AND ELECTRODES x PTE 18, 28, PCP 18, 28

COPPIE BRACCI/ARMS PAIR €cod. 803100 XP1 L=350 mm 530,00cod. 803101 XP2 L=500 mm 660,00cod. 803102 XP3 L=700 mm 830,00

ELETTRODI/ELECTRODES €cod. 690035 dritto /straight 11,00cod. 690036 curvo / bent 22,00cod. 443020 porta elettrodo / electrode holder 50,00

BRACCI ED ELETTRODI/ARMS AND ELECTRODES x pinza manuale/manual gun cod. 801043 (Digital Car Spotter)

COPPIE BRACCI/ARMS PAIR cod. 803015 XD1 coppia bracci diritti con elettrodi L=120 mm straight arm pair with electrodes cod. 803017 XD2 coppia bracci diritti con elettrodi L=350 mm straight arm pair with electrodes cod. 803024 XD3 coppia bracci ricurvi con elettrodi L=500 mm a larga apertura / shaped arms with large opening electrodes

BRACCI SINGOLI/ LOOSE ARMScod. 690029 braccio dritto / straight arm L=120 mmcod. 690025 braccio dritto / straight arm L=350 mmcod. 690027 braccio ricurvo / bent arm L=500 mmcod. 690026 braccio diritto / straight arm L=500 mm

ELETTRODI/ELECTRODEScod. 690012 elettrodo diritto / straight electrode L=50 mmcod. 690028 elettrodo per profi li interni ed esterni L=125 mm electrode for internal and external profi lescod. 690007 elettrodo diritto / straight electrode L=195 mm

66,00

160,00

210,00

26,0073,00

100,0092,00

3,807,70

10,00

BRACCI ED ELETTRODI ARMS AND ELECTRODES

CAPS MAINTENANCE KIT (AQUA)

GREASE

CA1, CA2, CA3, CA4, CA5Inverspotter 13500 Smart (AQUA), 14000 Smart (AQUA)

x Inverspotter 13500 Smart

x Inverspotter 13500 Smart Aqua, Inverspotter 14000 Smart (Aqua)

CB1, CB2, CB3, CB4, CB5Inverspotter 13500 SmartCOPPIE BRACCI/ARMS PAIR €cod. 803169 CA1 L=95 mm 460,00cod. 803182 CB1 L=95 mm 290,00cod. 803170 CA2 L=95 mm 640,00cod. 803183 CB2 L=95 mm 580,00cod. 803171 CA3 L=300 mm 520,00cod. 803184 CB3 L=300 mm 460,00cod. 803172 CA4 L=550 mm 630,00cod. 803185 CB4 L=550 mm 580,00cod. 803181 CA5 L=42 mm 400,00cod. 803186 CB5 L=42 mm 350,00

ELETTRODI/ELECTRODES cod. 690130 dritto /straight 4,00 x CA1, CA2, CA3, CB3, CA4, CB4 cod. 690132 dritto /straight x CB1, CB2 5,00cod. 690166 sferico /round x CA5, CB5 33,00

BRACCI ED ELETTRODI/ARMS AND ELECTRODES x Inverspotter 12000

COPPIE BRACCI/ARMS PAIR €cod. 803157 XB1 L=120 mm 320,00cod. 803105 XB2 L=250 mm 826,00cod. 803166 XB3 L=250 mm 760,00cod. 803167 XB4 L=400 mm 810,00cod. 803168 XB5 L=400 mm 930,00

ELETTRODI/ELECTRODES cod. 442111 dritto /straight 11,50cod. 690120 dritto /straight (x XB2) 26,00

KIT ANELLO SUPPORTO PINZA GUN HOLDING RING KIT

KIT ANELLO 360 360 RING KIT

x Inverspotter 12000

x Inverspotter 13500 Smart (AQUA), 14000 Smart (AQUA)

x Inverspotter 13500 Smart (AQUA), 14000 Smart (AQUA)

ELETTRODI/ELECTRODES x pinza a “C“ “C“ gun cod. 801041

cod. 690055 elettrodo diritto straight electrode € 5,50

ELETTRODI/ELECTRODES x pinza a doppio punto double point gun cod. 801042

KIT PORTAELETTRODI/HOLDER KIT ELECTRODE (Lungo-corto / Long-short) x CA1, CB1 Invespotter 14000 Aqua, 14000 Smart Aqua

cod. 990378 coppia elettrodi punta fuoricentro pair of offset electrodes € 21,00

KIT BILANCIATORE E PALO LOAD BALANCER AND POLE KIT

x Inverspotter 13500, 14000 Smart (AQUA)cod. 802650 € 670,00

cod. 802811 € 770,00

cod. 802482 € 150,00

cod. 802694 € 155,00

cod. 802866 € 265,00

cod. 802832

€ 380,00

4000

KIT STUDDER GUN x Spotter 5500, 7000, 9000 (AQUA)

KIT STUDDER GUN TOUCH x Spotter 5500, 7000, 9000 (AQUA)

BRACCI ED ELETTRODI/ARMS AND ELECTRODEScod. 803173 XF1 coppia bracci diritti + elettrodi / straight arm pair + electrodes L=150 mmcod. 803177 XF2 coppia bracci diritti per bordi / straight arm pair for edges + eletrodes L=350 mmcod. 803176 XF3 coppia bracci diritti + elettrodi / straight arm pair + electrodes L=250 mmcod. 803174 XF4 coppia bracci diritti + elettrodi / straight arm pair + electrodes L=400 mmcod. 803175 XF5 coppia bracci sagomati + elettrodi / shaped arm pair + electrodes L=400 mmcod. 803178 XF6 coppia bracci sagomati + elettrodi / shaped arm pair + electrodes L=525 mm

580,001.030,00

780,00870,00

1.060,001.510,00

CMK cod. 802768 € 75,00

cod. 802767 € 72,00cod. 321132

€ 26,00

CMKA

AQUA

x Digital Spotter 9000

GUN 00,

ER H0,

KIT STUDDER x Inverspotter 13500 Smart (AQUA), 14000 Smart (AQUA)

cod. 802699

€ 500,00

cod. 802868€ 200,00

0 Smart Aqu

d 802868

tt 1cod. 802833

€ 390,00

0


VETRO INATTINICOADIACTINIC LENS

dim. 107x51 mm (x cod. 802545, 802818) cod. 802575 € 4,50dim. 98x75 mmcod. 802547 € 4,50dim. 110x90 mm (x cod. 802812)cod. 802581 € 5,00

SCHERMI / SCREENS COPERTE - GREMBIULE / BLANKETS - APRON

MASCHERE PROFESSIONALI / PROFESSIONAL HELMETS

MASCHERE & VETRI / MASKS & LENSES

UP TO 550°C

UP TO 1100°C

11

2 2

COPERTA ANTI-CALORE HEAT RESISTANT BLANKET

1 rossa - red 1420x2000mm cod. 802678 € 40,002 bianca - white 1530x1920

cod. 802679 € 112,00

1

UUPP TTOOO 111111

22

GREMBIULE PER SALDATURAWELDER’S APRON

cod. 802550 € 37,00

MASCHERAHAND SHIELD

cod. 802545 € 8,00

€ 180,00

€ 84,00

€ 55,00 € 48,00 € 19,00

€ 124,00

€ 73,00

€ 100,00

€ 64,00

€ 17,00

dim. 98x75 mmcod. 802548 € 4,50dim. 110x90 mmcod. 802580 € 4,50

1 KIT SCHERMO PROTETTIVO CON SUPPORTO PROTECTIVE SCREEN WITH SUPPORT KIT

rosso - red cod. 803508 € 136,00 verde - green cod. 803509 € 136,00

2 SCHERMO PROTETTIVO PROTECTIVE SCREEN

rosso - red 1740x1740mm cod. 802676 € 50,00 verde - green 1740x1740mm cod. 802677 € 50,00

dim. 110x90 mm (x Stream, Stream Flame, Tribe, Tribe Red, Tiger XL, Tiger)cod. 802655 € 5,80dim. 115x94 mm (x Jaguar, Jaguar Fire )cod. 802804 € 6,00dim. 134x114 mm (x Vantage Grey XXL, Vantage Red XL )cod. 802939 € 6,40dim. 102x47 mm (x Stream, Stream Flame, Tribe, Tribe Red )cod. 802834 € 5,50

PROTEZIONE VETRO GLASS PROTECTION (2 PZ/PCS)

Q.TA’ DI VENDITA PER MULTIPLI DI:

Q.TY FOR SALES BY MULTIPLE OF: 2 pcs 6 pcs 12 pcs blister10 pcs

cod. 802693 € 22,00

x Startzilla 3024 cod. 802950 € 14,00

cod. 802935€ 15,00

OBD II MEMORY SAVER CABLES

KIT ACCESSORI/ACCESSORIES KIT

JUMP START

VEHICLE’S PORT

OBD IICABLE

JUMP START

VEHICLE’S PORT

OBD IICABLE

VANTAGE GREY XXLCod. 802937

• automatic• variable: 4/5÷9/9÷13 DIN• double range• grinding mode• TIG from >5A• class: 1/1/1/2• 4 sensors• XXL view area

• automatic• variable: 4/5÷9/9÷13 DIN• double range• grinding mode• TIG from >5A• class: 1/1/1/2• 4 sensors• XL view area

VANTAGE RED XLCod. 802936

JAGUAR FIRECod. 802807

VANTAGCod

• a• • utomat• variable• double r• grinding

TIG f

• automat• variable:• double ra• grinding

VANTACod

• automatic• variable: 4/5÷9/9÷13 DIN• double range• grinding mode• TIG from >5A• class: 1/2/1/2

JACo

• automatic• variable: 4• double ran• grinding m• TIG from >• class: 1/2

JAGUARCod. 802779

• automatic• variable: 4/5÷9/9÷13 DIN• double range• grinding mode• TIG from >5A• class: 1/2/1/2

JAGUCod. 8

• automatic• variable: 4• double ran• grinding m

TIG f

STREAM FLAMECod. 802816

• automatic• variable: 4/9÷13 DIN• grinding mode• TIG from >5A• class: 1/1/1/2

STREAMCod. 8

• automatic• variable: 4/• grinding mod• TIG from >5A

• automatic• variable: 4/9÷13 DIN• grinding mode• TIG from >5A• class: 1/1/1/2

STREAMCod. 802813

• automatic• variable: 4• grinding m• TIG from >

STRCod. 8

• fix• 11 DIN• XL view area

• fix• 11 DIN

TIGERCod. 802818

TIGER XLCod. 802812

00

• fix• 11 DIN

TIGER XCod. 8028

,00000000

• fix• 11 DIN

TIGERCod. 802

• automatic• fix 11 DIN• TIG from >5A• class: 1/1/1/2

TRIBECod. 802837

• automatic• fix 11 DIN• TIG from

TRIBECod. 802

• automatic• fix 11 DIN• TIG from >5A• class: 1/1/1/2

TRIBE REDCod. 802814

• automatic• fix 11 DIN• TIG from

TRIBE RCod. 802


TESTER / TESTERS

ELETTRODI / ELECTRODES

RUTILI - RUTILE BASICI - BASIC

1- ACCIAIO - STEEL

2- ACCIAIO INOX - STAINLESS STEEL

3- ACCIAIO - STEEL

ACCIAIO - STEEL

TIG

RUTILI / RUTILE

Ø 2,5 mm 2,5kg (119pcs) cod. 802748 € 14,00

Ø 3,2 mm 5kg (137pcs) cod. 802765 € 25,00

6m cod. 802793 € 47,0010m cod. 802794 € 62,00

6m cod. 802945 INFO 201610m cod. 802946 INFO 2016

Ø 2 mm 2,5kg (227pcs) cod. 802737 € 12,00

Ø 2,5 mm 2,5kg (143pcs) cod. 802739 € 10,00

Ø 3,2 mm 4kg (125pcs) cod. 802749 € 14,50

BASICI / BASIC

cod. 802673€ 10,00

cod. 802840 € 16,00

cod. 803066 € 27,00

cod. 802667€ 13,00

cod. 802632€ 25,00

Kit 10 pcs - Ø 2,5 cod. 802621 € 6,50Kit 8 pcs - Ø 3,2 cod. 802622 € 7,00

Kit 10 pcs - Ø 2,5 cod. 802623 € 12,00Kit 8 pcs - Ø 3,2 cod. 802624 € 15,00

Kit 15 pcs - Ø 1,6 cod. 802616 € 4,00Kit 15 pcs - Ø 2 cod. 802617 € 4,00Kit 15 pcs - Ø 2,5 cod. 802618 € 4,40Kit 10 pcs - Ø 3,2 cod. 802619 € 4,50Kit 8 pcs - Ø 4 cod. 802620 € 5,00

Q.TA’ DI VENDITA PER MULTIPLI DI:

Q.TY FOR SALES BY MULTIPLE OF:

CAVI AVVIAMENTO / STARTING CABLES CAVI / CABLES

ARC PROTECTOR

GUANTI PROFESSIONALI PER SALDATURAPROFESSIONAL WELDING GLOVES

POWER LINE Supporto a muro Wall support

PRO LINE - PROFESSIONAL RANGE

3 m - Ø16 mm2 250A cod. 802746 € 20,003 m - Ø25 mm2 350A cod. 802747 € 30,003 m - Ø16 mm2 250A cod. 802698 € 30,00 electronic control

3 m - Ø16 mm2 350A cod. 802515 € 50,003 m - Ø25 mm2 550A cod. 802516 € 74,003 m - Ø35 mm2 800A cod. 802668 € 160,00

pcs) cod. 802748 € 14,00

1 32

P3

3

3

MADE IN ITALYMAD

ALTERNATOR TESTSTART SYSTEM TESTBATTERY START CAPABILITY

T125cod. 802780

€ 52,00

ALTERNATOR TEST

DV300cod. 802782

€ 16,00

BATTERY START CAPABILITY

DT400cod. 802605

€ 74,00

ALTERNATOR TESTSTART SYSTEM TEST

BTS350cod. 802783

€ 8,80


DTS700cod. 802665

€ 110,00

TY

BATTERY START CAPABILITYSUPPLIED IN PLASTIC CARRY CASE

INCLUDEDKIT 2 PCScod. 950046

€ 6,60

DTP800cod. 802606

€ 360,00

T200cod. 802517

€ 60,00


T500cod. 802781

€ 106,00

ELETTRODI CARBONE /CARBON ELECTRODES

Ø 8 mm 300mm (5pcs) cod. 802803 € 5,00Ø 10 mm 300mm (5pcs) cod. 802305 € 6,00

x Pulse 30,50, Doctor Charge 30, 50

SUPPORT

x Doctor Charge 30, 50

x Doctor Charge 130

co

2 pcs 8 pcs

8

4 pcs

4

6 pcs blister12 pcs10 pcs

8

8

8

4

5

INFO 201


PINZA PORTAELETTRODIELECTRODE HOLDERDALLAS 300300A Ø max 25 mm2 cod. 802609 € 5,00





MORSETTO DI MASSAEARTH CLAMPCOLORADO 150B150A Ø max 16 mm2 cod. 802532 € 2,20

cod. 803510€ 800,00

MORSETTO DI MASSAEARTH CLAMPTOLEDO 300300A Ø max 25 mm2

cod. 802533 € 3,00


cod. 802534 € 11,00


cod. 802535 € 18,00

MORSETTO DI MASSA ”C”EARTH CLAMP ”C”CORDOBA 500500A Ø max 70 mm2 cod. 802536 € 30,00

MARTELLINA CONMANICO IN LEGNOWOODEN CHIPPING HAMMER

cod. 802540 € 6,20

MARTELLINA CONMANICO IN FERROMETAL CHIPPING HAMMER

cod. 802543 € 7,00

ESCORIATORESLAG REMOVER

cod. 802541 € 4,80

SPAZZOLA METALLICAMETAL BRUSH

cod. 802542 € 6,60

1030 mm

2230

mm

560 mm

cod. 803506€ 42,00cod 80

DISPLAYER BANNER FLAGS

STAND

CAVO SALDATURA 10mWELDING CABLE 10mx 10 mm2

cod. 802574 € 28,00x 16 mm2

cod. 802560 € 48,00x 25 mm2

cod. 802561 € 76,00

ESPOSITORE PER BLISTER / DISPLAYER FOR BLISTERS


1. 2200x1000mm cod. 988956 € 100,00

2. 1100x500mm cod. 988957 € 25,00

500x2400 mmcod. 989331€ 110,00

600x2800 mmcod. 989332

€ 80,00


PINZE PORTAELETTRODI/ELECTRODE HOLDERS a. Dallas 300 cod. 712260 300 A Ø max 25 mm2 3,70

b. Dallas 400 cod. 712019 400 A Ø max 50 mm2 5,60

c. Dallas 600 cod. 712015 600 A Ø max 70 mm2 14,00

d

i

e

j

f

k

g

l

h

m

n o p q r

a b c

s t u v

PINZE POSITIVO/POSITIVE CLAMPS d. Colorado 40R cod. 712623 40 A 0,60

e. Colorado 60R cod. 712360 60 A 0,90

f. Colorado 150R cod. 712002 150 A Ø max 16 mm2 1,20

g. Arizona 70R cod. 712346 70 A 1,50

h. Arizona 150R cod. 712368 150 A 2,10

PINZE DI MASSA/EARTH CLAMPS i. Colorado 40B cod. 712624 40 A 0,60

j. Colorado 60B cod. 712361 60 A 0,90

k. Colorado 150B cod. 712001 150 A Ø max 16 mm2 1,20

l. Arizona 70B cod. 712347 70 A 1,50

m. Arizona 150B cod. 712369 150 A 2,10

MORSETTI DI MASSA/EARTH CLAMPS n. Toledo 250 cod. 712030 250 A Ø max 25 mm2 1,70

o. Toledo 300 cod. 712231 300 A Ø max 25 mm2 2,20 con lamella in rame / with copper blade

p. Toledo 400 cod. 712032 450 A Ø max 70 mm2 9,00

q. Toledo 600 cod. 712034 600 A Ø max 95 mm2 16,00

r. Cordoba 500 cod. 712209 500 A Ø max 70 mm2 26,00

MARTELLINE - SPAZZOLE/HAMMERS - BRUSHES

s. cod. 712139 Escoriatore-spazzola / Slag remover 1,30

t. cod. 712213 Spazzola metallica / Metal brush 3,30

u. cod. 712087 Martellina con manico in legno 2,80 Wooden chipping hammer

v. cod. 712214 Martellina con manico in ferro 3,20 Metal chipping hammer

ACCESSORI SFUSI / ACCESSORIES IN BULK

POSIZIONATORE MAGNETICOMAGNETIC HOLDER

cod. 802583 € 7,00

PINZA DI MASSAEARTH CLAMProsso/red (+)

COLORADO 40R 40A cod. 802527 € 1,50

COLORADO 60R 60A cod. 802529 € 2,00

COLORADO 150R 150A cod. 802531 € 2,20

PINZA DI MASSAEARTH CLAMPnero/black (-)

COLORADO 40B 40A cod. 802528 € 1,50

COLORADO 60B 60A cod. 802530 € 2,00

COLORADO 150B 150A cod. 802532 € 2,20

ESTRATTORE PER MORSETTI BATTERIE BATTERY TERMINALS EXTRACTOR

cod. 802521 € 5,00

GANCIO MAGNETICOMAGNETIC HOOK

cod. 802664 € 11,00

SPAZZOLA PERMORSETTI BATTERIABATTERY TERMINALS BRUSH

cod. 802522 € 4,00

PINZA DI SALDATURA MULTIUSOMULTIPURPOSE WELD PLIER

cod. 802582 € 14,00

CAPICORDA AD OCCHIELLO (2 PZ)

WIRE TERMINALSWITH EYELET (2 PCS)

25 mm2

cod. 802556 € 6,6050 mm2

cod. 802563 € 8,80

SPINOTTI DINSE MASCHIDINSE MALE PLUGS (2PZ /2 PCS)

25 mm2

cod. 802558 € 8,8050 mm2

cod. 802559 € 16,00


La merce viaggia a rischio e pericolo del committente e non si accettano reclami relativi alle forniture o ai prezzi esposti in fattura per errori di stampa, trascorsi 8 giorni dal ricevimento. Non si risponde dei ritardi di spedizione dovuti a cause di forza maggiore o a casi fortuiti. Eventuali ritardi di consegna non danno diritto ad indennizzi che non siano stati particolarmente stabiliti. La merce venduta rimane di proprietà dell’Azienda venditrice sino ad integrale pagamento e gli acconti pagati saranno trattenuti a rifusione di danni e spese. Scaduto il termine fi ssato per il pagamento, l’Azienda si ritiene autorizzata ad emettere tratta senza alcun preavviso. Ogni ritardo nel pagamento dà luogo alla decorrenza degli interessi. L’Azienda si riserva il diritto di modifi care prezzi o modelli in qualsiasi momento e senza che ciò implichi il diritto da parte della clientela ad alcun risarcimento. Per qualsiasi contestazione delle parti è competente il foro di Vicenza.

The goods travel at purchaser’s risk and the Seller does not accept any complaint regarding the supplies or the prices contained in the invoice, due to printing mistakes, logded later than 8 days after the delivery. The Seller will not be held liable for any delay due force majeure or fortuitous events. Any delay in the delivery does not give the right to refunds unless they were previously agreed upon. The sold goods remain property of the Seller until they have been fully paid, and any down-payment will be kept as compensation for damages and expenses. Once the payment term has expired, the Seller reserves the right to issue a draft without previous notice. Any delay in the payment will give rise to the start of interests accrual. The Seller reserves the right to change prices and models at any time and this will not give rise to any refund. The place of jurisdiction for the settlement of any controversy is Vicenza.

cod.

9894

00 -

I.P.

4.0

00

C

opyr

ight

by

Telw

in ©

2016 -

Tutt

i i d

iritt

i ris

erva

ti. A

ll rig

hts

rese

rved

.

TELWIN S.p.A.Via della Tecnica, 336030 VILLAVERLA (Vicenza) ItalyTel. +39 0445 858811 - Fax +39 0445 858800/801info: [email protected] - www.telwin.com

telwin.com

fi nd us: telwinspa

Date post:	29-May-2018
Category:	Documents
Upload:	lamnguyet
View:	219 times
Download:	0 times

Prodotti & Accessori - VRSvrsagenzia.it/wpsystem/wp-content/uploads/2015/12/Telwin...PRODOTTI /...

Documents