оборудование для бурения, сервиса и эксплуатации нефтегазовых скважин
PRODUCT CATALOGUEoil and gas well drilling, servicing and operating equipment
3Product ordering: +7 (351) 729-90-49 | [email protected]
CONTENTS
About the company 5
Christmas tree valves 6
АФ Christmas tree valves 6
АФК Christmas tree valves 8
АФКЭ Christmas tree valves 10
Equipment for hydraulic fracturing (ГРП) - equipment for coiled tubing 12
Frac valves for hydraulic fracturing (ГРП) 12
Valve block for hydraulic fracturing (ГРП) 14
Parallel slide gate valves for hydraulic fracturing (ГРП) 16
Wellhead strippers (ГУ) 18
Suspended spools 20
Counter flanges 21
Split heads 22
Flanged crosses 24
Flanged tees 25
Flanged lubricators 26
Rental, maintenance, spare parts 27
Isolation and control valves 28
ЗМС parallel slide gate valves 28
ЗМСГ hydraulically-operated parallel slide gate valves 30
ДРУ adjustable angle throttles 32
ДНУ non-adjustable angle throttles 34
Blowout prevention equipment 36
Choke manifolds 36
Kill manifolds 37
Blowing lines 38
Blowout prevention equipment rental 39
Wellhead and blowout prevention equipment components 40
Adapter spools 40
Wellhead crosses 41
Connector adapters 42
Elbows, tees, crosses 43
Supplementary oil and gas equipment 44
Subs, couplings 44
Flanges 46
Elbows, tees, crosses for tubing (НКТ) thread 47
O-rings, gaskets 48
ВПЭМ valve 50
Valves 50
Mud boxes 51
Dies and anvils for drilling tongs 52
Certificates 54
Contact details 55
5Product ordering: +7 (351) 729-90-49 | [email protected]
ABOUT THE COMPANYURALSPETSARMATURA is a production company specializing in the manufacture of wellhead equipment for oil and gas well drilling, servicing and operating.
Key figures and facts• Location: Russian Federation, Chelyabinsk• Year of foundation - 2014• Number of employees - more than 80 people• Production site – more than 2 000 m2
• Foreign CNC metalworking machines• Own design and engineering office• Modern methods of technical control of each production stage• Deliveries throughout Russia and CIS
Key focus areas• Christmas tree valves• Isolation and control valves• BOP equipment• Wellhead equipment for hydraulic fracturing and coiled tubing• Development and production of non-standard equipment according to the customer's technical requirements• Import substitution
Our values• Ability to find innovative solutions to complex technical problems• Customer-oriented approach• Team spirit• The shortest possible time to master new types of products
Guarantees• Technical – reliability and high quality of the supplied equipment• Legal – by virtue of the contract we are legally responsible for the fulfillment of our obligations and
terms of their fulfillment• Financial – we can consider special conditions of cooperation.
Our clients
vwww.uralsa74.ru6 7
АФ CHRISTMAS TREE VALVES
Christmas tree valves
Main technical parameters:• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Christmas tree valves can be manufactured according to GOST 13846-89 standard schemes or customer's individual schemes.
Equipment designation
Operating pressure NPS, mm
MPa psi Wellbore Side tracks Tubing head side tracks
АФ6 65/65х21
21 3000
6565
50, 65
АФ6 80/65х2180
АФ6 80/80х2180
АФ6 100/80х21100
АФ6 100/100х21 100
АФ6 65/65х35
35 5000
6565
АФ6 80/65х3580
АФ6 80/80х3580
АФ6 100/80х35100
АФ6 100/100х35 100
АФ6 65/65х70
70 10000
6565
АФ6 80/65х7080
АФ6 80/80х7080
АФ6 100/80х70100
АФ6 100/100х70 100
АФ6 65/65х105
105 15000
6565
АФ6 80/65х10580
АФ6 80/80х10580
АФ6 100/80х105100
АФ6 100/100х105 100
Designation example:
АФ 6.80/65х70 К1 Application:
Christmas tree valves are designed for oil and gas well sealing, suspension of well pipelines, well operation control andadjustment, carrying out necessary process operations, shutting the operating medium flow down.
Tubing (НКТ) is suspended using a tube holder.
Intermediate flange
Bush
Stop assembly
O-ring
Seal
Stop bush
Packing nut
Adjustable throttle*
Tree cap*ЗМС gate valve
Cross
Transition piece
Tube holder
Wellheadcross
Airvalve
Pressure controlvalve
Backing flange*
Transition piece
Pressure gauge
Tubing head
* Can be replaced with another type of product
Corrosion resistance category
Operating pressure, MPa
Side tracks NPS, mmWellbore NPS, mm
Design scheme according to GOST 13846-89
Christmas tree valves with pipe suspension in the tube holder
Product ordering: +7 (351) 729-90-49 | [email protected]
vwww.uralsa74.ru8 9
АФК CHRISTMAS TREE VALVES
Christmas tree valves
Application: Christmas tree valves are designed for oil and gas well sealing, suspension of well pipelines, well operation control and adjustment, carrying out necessary process operations, shutting the operating medium flow down.
Tubing (НКТ) is suspended using a transition piece.
Main technical parameters:• Motherbore NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Side track NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Tubing head NPS, mm (in): 52 (2 1/16), 65 (2 9/16);• Operating pressure, MPa (psi): 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Christmas tree valves can be manufactured according to GOST 13846-89 standard schemes or customer's individual schemes.
Designation example:
АФК 6.80/65х105 К1
Blind flange for the pressure gauge*
ЗМС gate valve
Cross
Adjustable throttle*
Backing flange*
Transition piece
Wellhead cross
Blind flange for the pressure gauge*
Pipe suspension thread
O-ring
Wellhead cross
Air valve Pressure control valve
Transition piece
* Can be replaced with another type of product
1 – sub to the tubing head; 2 – tee; 3 – shutoff device; 4 – pressure gauge with the shutoff and discharge device; 5 – throttle; 6 – counterflange; 7 – cross
1 – counterflange; 2 – shutoff device; 3 – cross; 4 – pressure gauge with the needle valve
Standard schemes of Christmas trees for tee and cross valves according to GOST 13846-89:
Standard schemes of tubing systems (tubing heads) for Christmas tree valves according to GOST 13846-89
Corrosion resistance category
Operating pressure, MPa
Side track NPS, mmWellbore NPS, mm
Design scheme according to GOST 13846-89
Christmas tree valves with pipe suspension in the transition piece
Pressure gauge
1
2
3
4
5 6
1 1 11 1
22
2
33
3
33
44
4
44
77
55
5
55
6
66 6
6
1
2
3
4
5 6
1 1 11 1
22
2
33
3
33
44
4
44
77
55
5
55
6
66 6
6
1234 4 3 2 11234 4 3 2 11234 4 3 2 11234 4 3 2 1
Product ordering: +7 (351) 729-90-49 | [email protected]
vwww.uralsa74.ru10 11
АФКЭ CHRISTMAS TREE VALVES
Christmas tree valves
Application:Christmas tree valves (with the cable gland) are designed for oil and gas well sealing, suspension of well pipelines, well operation control and adjustment, carrying out necessary process operations, shutting the operating medium flow down.
It features the cable gland to connect the electric submersible pump, which allows for the well operation intensification.
Tubing (НКТ) is suspended using a transition piece.
Main technical parameters:• Motherbore NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Side track NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Tubing head NPS, mm (in): 52 (2 1/16), 65 (2 9/16);• Operating pressure, MPa (psi): 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Christmas tree valves can be manufactured according to GOST 13846-89 standard schemes or customer's individual schemes.
Designation example:
АФКЭ 3.80/65х35 К1
Flange with the НКТ (tubing) thread
ЗМС gate valve
Tee Intermediate flange
Backing flange*
Positive choke*
Cable gland
Transition piece
Wellhead cross
Plug with the НКТ (tubing) thread
Transition piece
Cable gland
Pipe suspension thread
Air valve
Pressure control valve
O-ring
Wellhead cross
* Can be replaced with another type of product
Wellbore NPS, mm
Corrosion resistance category
Operating pressure, MPa
Side track NPS, mmDesign scheme according to GOST 13846-89
Cable gland
Christmas tree valves with pipe suspension in the transition piece
Pressure gauge
Product ordering: +7 (351) 729-90-49 | [email protected]
vwww.uralsa74.ru12 13Product ordering: +7 (351) 729-90-49 | [email protected]
Equipment for hydraulic fracturing (ГРП) - equipment for coiled tubing
Application:Frac valves are designed to seal the wellhead and annular space, suspend the tubing string and packer assembly, and ensure the process of pumping the operating fluids and mixtures used in hydraulic fracturing operations.
URALSPETSARMATURA designs and manufactures various types of frac valves for hydraulic fracturing (ГРП) according to the customer's technical requirements.
Advantages:• Valves are compact, simple in design and highly reliable. • Guaranteed performance in one operation – 1200 t of proppant.
Main technical parameters:• Operating medium: water, oil, oil products, alkalis, inhibited acid solutions, proppant,
cement and clay solutions;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Parameter name 65х70 80х70 100х70 65х105 80х105 100х105
Operating pressure, MPa, not more than 70 105
NPS, mm 65 80 100 65 80 100
Shutoff device ЗМС 65х70 ГРП ЗМС 80х70 ГРП ЗМС 100х70 ГРП ЗМС 65х105 ГРП ЗМС 80х105 ГРП ЗМС 100х105 ГРП
Pipeline suspension thread
НКТ 73 GOST 633-80
НКТ 89 GOST 633-80
НКТ 114 GOST 633-80
НКТ 73 GOST 633-80
НКТ 89 GOST 633-80
НКТ 114 GOST 633-80
Top flange connection dimensions
НКТ 73 GOST 633-80
НКТ 89 GOST 633-80
НКТ 114 GOST 633-80
НКТ 73 GOST 633-80
НКТ 89 GOST 633-80
НКТ 114 GOST 633-80
Bottom flange connection dimensions
180х21
180х35
Dimensions, mm (length x width x height) 775х500х1065 830х500х1210 865х500х1505 890х500х1040 800х500х1382 900х650х1600
Weight, kg, not more than 400 500 735 530 780 870
Guarantee period 1 year
Designation example:
АГРП. 80х70 К1
FRAC VALVES FOR HYDRAULIC FRACTURING (ГРП)
Counter flange*
ЗМС ГРП (hydraulic fracturing) gate valve
Adapter spool
Wellhead stripper
* Can be replaced with another type of product
Corrosion resistance category
Operating pressure, MPaNPS, mm
Hydraulic fracturing valves
vwww.uralsa74.ru14 15Product ordering: +7 (351) 729-90-49 | [email protected]
Equipment for hydraulic fracturing (ГРП) - equipment for coiled tubing
VALVE BLOCK FOR HYDRAULIC FRACTURING (ГРП) Application:Valve block for hydraulic fracturing (ГРП) is designed to seal the wellhead, suspend the tubing string and packer assembly, and ensure the process of pumping the operating fluids and mixtures used in hydraulic fracturing operations.
URALSPETSARMATURA designs and manufactures various types of valves for hydraulic fracturing (ГРП) according to the customer's technical requirements.
Advantages:• Valves are compact, simple in design and highly reliable. • Guaranteed performance in one operation – 1200 t of proppant.
Main technical parameters:• Operating medium: water, oil, oil products, alkalis, inhibited acid solutions, proppant,
cement and clay solutions;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Parameter name 65х70 80х70 100х70 65х105 80х105 100х105
Operating pressure, MPa, not more than 70 105
NPS, mm 65 80 100 65 80 100
Shutoff device ЗМС 65х70 ГРП ЗМС 80х70 ГРП ЗМС 100х70 ГРП ЗМС 65х105 ГРП ЗМС 80х105 ГРП ЗМС 100х105 ГРП
Pipeline suspension thread
НКТ 73 GOST 633-80
НКТ 89 GOST 633-80
НКТ 114 GOST 633-80
НКТ 73 GOST 633-80
НКТ 89 GOST 633-80
НКТ 114 GOST 633-80
Top flange connection dimensions
НКТ 73 GOST 633-80
НКТ 89 GOST 633-80
НКТ 114 GOST 633-80
НКТ 73 GOST 633-80
НКТ 89 GOST 633-80
НКТ 114 GOST 633-80
Bottom flange connection dimensions
180х21
180х35
Dimensions, mm (length x width x height) 775х500х815 830х500х960 865х500х1150 890х500х690 800х500х1025 900х650х1250
Weight, kg, not more than 250 350 545 320 570 660
Guarantee period 1 year
Designation example:
БГРП. 80х70 К1
Counter flange*
ЗМС ГРП (hydraulic fracturing) gate valve
Adapter spool
* Can be replaced with another type of product
Corrosion resistance category
Operating pressure, MPaNPS, mm
Hydraulic fracturing block
vwww.uralsa74.ru16 17Product ordering: +7 (351) 729-90-49 | [email protected]
PARALLEL SLIDE GATE VALVES FOR HYDRAULIC FRACTURING (ГРП)
Equipment for hydraulic fracturing (ГРП) - equipment for coiled tubing
Application:ЗМС ГРП (hydraulic fracturing) parallel slide gate valves are designed to be used as a part of wellhead configuration when carrying out hydraulic fracturing operations. They feature innovative technologies to reinforce the body and the "slide-seat" shutoff device, which increases the service life of isolation valves during the hydraulic fracturing (ГРП) operation.
Advantages:• Guaranteed gate valve performance in one operation is 1200 t of proppant;• Gate valve design ensures minimum proppant penetration into the body during the hydraulic fracturing (ГРП) operations;• Gate valve solid forged body ensures high reliability and convenient operation;• Gate valves are equipped with slide position indicator, which eliminates the possibility of proppant washout of
the shutoff device;• Usage of the two-stage reducer allows you to minimize the force on the handwheel when opening the gate valve.
L
�B
H
L
�B
H
L
�B
H
L
�B
H
W/o the reducer With the reducer
Main technical parameters:• Operating medium: water, oil, oil products, alkalis, inhibited acid solutions, proppant, cement
and clay solutions;• For ЗМС 80х105, 100х70 and 100х105 it is possible to install the two-stage reducer with the following reduction ratio:
1 stage – 4; 2 stage – 1;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Gate shutoff class – А according to GOST 9544 - 2005;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation NPS, mm
(in) Operating pressure,
MPa (psi) Overall dimensions
H L BЗМС-65х70 65 (2 9/16) 70 (10000) 775 565 500
ЗМС-65х105 65 (2 9/16) 105 (15000) 750 533 500
ЗМС-80х70 80 (3 1/8) 70 (10000) 830 620 500
ЗМС-80х105 80 (3 1/8) 105 (15000) 900 598 500
ЗМС-80х105 with the reducer 80 (3 1/8) 105 (15000) 1150 598 500
ЗМС-100х70 100 (4 1/16) 70 (10000) 950 670 645
ЗМС-100х70 with the reducer 100 (4 1/16) 70 (10000) 1200 670 645
ЗМС-100х105 100 (4 1/16) 105 (15000) 960 737 645
ЗМС-100х105 with the reducer 100 (4 1/16) 105 (15000) 1210 737 645
Designation example:
ЗМС 80х70 К1 ГРП
Corrosion resistance category
Hydraulic fracturing
Operating pressure, MPa
NPS, mm
Oil-filled steel gate valve
Flywheel
Reducer*
Pressure control valve
Solid forged body
Drain plug
Air valve
* Reducer is installed in agreement with the customer
vwww.uralsa74.ru18 19Product ordering: +7 (351) 729-90-49 | [email protected]
WELLHEAD STRIPPERS (ГУ) (WASHOUT STRAIGHT-THROUGH SPOOLS)
Equipment for hydraulic fracturing (ГРП) - equipment for coiled tubing
ГУ type 1 ГУ type 2
�211,1�317,5
�D1�211,1�317,5
D2
hh
H
�D1
9,5
13,5
�211,1�317,5
�D1�211,1�317,5
D2
hh
H
�D1
9,5
13,5
H
D1�211,1�317,5�D2
D1
�211,1�317,5
9,5
13,5
hh
H
D1�211,1�317,5�D2
D1
�211,1�317,5
9,5
13,5
hh
Type 1 Type 2
Threaded bush
Washer
Body
Packing nut
Application:Wellhead stripper is designed to seal the annular space at the wellhead when carrying out various process operations.
The wellhead stripper allows for axial movement of the pipe, its rotation, pulling the couplings through the sealing element under pressure from top to bottom and from bottom to top.
Main technical parameters:• Operating medium: water, oil, oil products, alkalis, inhibited acid solutions,
proppant, cement and clay solutions;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Main parametersГУ 180х21
НКТ 73ГУ 180х35
НКТ 73ГУ 180х21
НКТ 89ГУ 180х35
НКТ 89ГУ 180х21
НКТ 114ГУ 180х35
НКТ 114Maximum (operating) pressure on the sealing unit NP, MPa, not more than 21 35 21 35 21 35
Operating medium non-corrosive, K1, K2
Outside diameter D, mm 380 395 380 395 380 395
Height H, mmType 1 260
350260
350300
350Type 2 300 300 340
Full flange thickness h, mm 64 92 64 92 64 92
Diameter for the pushed-through coupling D1, mm
Type 1 94 112 136
Type 2 98 116 145
Number of holes for studs n 12
Diameter of holes for studs, mm 32/28* 39** 32/28* 39** 32/28* 39**
Diameter of sealed pipes, mm 73 89 114
Gasket groove width, mm 12 13,5 12 13,5 12 13,5
Gasket according to GOST 28919-91 П45 П46 П45 П46 П45 П46
* Special design of the bottom flange allows installing the stripper on flanges of 180x21 and 180x14 sizes in accordance with GOST 28919 with the use of appropriate mounting elements.
** Connection dimensions of the stripper's bottom flange of 180x35 allow it to be mounted on a string head with the 180x21 size, provided a special adapter pad and fastening elements are used.
Designation example:
ГУ-1 180х35.НКТ89 К1
Reinforcedlip-type seal
Rubberlip-type seal
Corrosion resistance category
Thread designation for the pulled-through pipe
Operating pressure, MPaNPS, mm
Stripper type
Wellhead stripper
vwww.uralsa74.ru20 21Product ordering: +7 (351) 729-90-49 | [email protected]
SUSPENDED SPOOLS COUNTER FLANGES
Equipment for hydraulic fracturing (ГРП) - equipment for coiled tubing
Application:Counter flanges are designed for threaded connection of the wellhead equipment to the process equipment.Flanges are manufactured with the НКТ, НКТВ, ACME and other thread types according to Russian and foreign standards.
Main technical parameters:• Flange NPS options, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16), 130 (5 1/8);• Operating pressure, MPa (psi): 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Operating medium: water, oil, oil products, alkalis, inhibited acid solutions, proppant,
cement and clay solutions;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation examples:
ФВР 80х70/НКТ89 К1
ФНР 65х105/БРС2 К1
Application:Suspended spools are the transition elements (in the wellhead configuration) between the flanges, made according to GOST 28919-91 or API 6A, and serve to suspend the tubing string.
Main technical parameters:• Top and bottom flange NPS options, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16),
156 (6 3/25), 180 (7 1/16), 230 (9), 280 (11), 350 (13 5/8), 425 (16 3/4), 540 (21 1/4);• Thread types for pipe suspension: НКТ (НКТВ) 60, 73, 89, 114;• Operating pressure, MPa (psi): 14 (2000), 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
КП 80х70/180х35.НКТ89 К1
Bottom flange NPS, mm
Corrosion resistance category
Designation of the thread cut in the spool
Operating pressure on the bottom flange, MPaOperating pressure on the top flange, MPa
Top flange NPS, mm
Suspended spool
Corrosion resistance category
Corrosion resistance category
Thread designation on the flange
Thread designation on the flange
Operating pressure, MPa
Operating pressure, MPa
NPS, mm
NPS, mm
Flange with the internal thread
Flange with the external thread
Top flange
Bottom flange
Pipe suspensionthread
Internal thread
Externalthread
vwww.uralsa74.ru22 23Product ordering: +7 (351) 729-90-49 | [email protected]
SPLIT HEADS
Equipment for hydraulic fracturing (ГРП) - equipment for coiled tubing
Type 1
Type 2
Application: Split heads help in carrying out operations with pumping units in the amount of up to 3 (type 1) or 6 (type 2) pieces. With fewer pumping units, the unused ports are sealed by means of plugs. URALSPETSARMATURA develops non-standard split heads according to the customer's technical requirements.
Main technical parameters:• Central flange NPS, mm (in): 80 (3 1/16), 100 (4 1/16), 130 (5 1/8);• Side flange NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Operating pressure, MPa (psi): 70 (10000), 105 (15000);• Operating medium: water, oil, oil products, alkalis, inhibited acid solutions, proppant,
cement and clay solutions;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
ГР-1 100/80х70 К1
Central flange
Central flange
Side flange
Side flange
Corrosion resistance category
Operating pressure, MPa
Side flange NPS
Split head type
Central flange NPS
Split head
vwww.uralsa74.ru24 25Product ordering: +7 (351) 729-90-49 | [email protected]
FLANGED CROSSES FLANGED TEES
Equipment for hydraulic fracturing (ГРП) - equipment for coiled tubing
Application:Flanged cross is designed for the connection of wellhead equipment having flanges made in accordance with GOST 28919-91 or API 6A. It is used mainly in the coiled tubing unit operation.
Main technical parameters:• Central flange NPS, mm (in): 80 (3 1/16), 100 (4 1/16), 130 (5 1/8);• Side flange NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Operating pressure, MPa (psi): 70 (10000), 105 (15000);• Operating medium: water, oil, oil products, alkalis, inhibited acid solutions, proppant,
cement and clay solutions;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
КФ 80/50х70 К1
Application: Flanged tee is designed for the connection of wellhead equipment having flanges made in accordance with GOST 28919-91 or API 6A. It is used mainly in the coiled tubing unit operation.
Main technical parameters:• Central flange NPS, mm (in): 80 (3 1/16), 100 (4 1/16), 130 (5 1/8);• Side flange NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Operating pressure, MPa (psi): 70 (10000), 105 (15000);• Operating medium: water, oil, oil products, alkalis, inhibited acid solutions, proppant,
cement and clay solutions;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
ТФ 65/50х105 К1
Central flange Central flange
Side flange Side flange
Corrosion resistance category
Operating pressure, MPa
Side flange NPS
Central flange NPS, mm
Flanged cross Corrosion resistance category
Operating pressure, MPa
Side flange NPS, mm
Central flange NPS, mm
Flanged tee
vwww.uralsa74.ru26 27Product ordering: +7 (351) 729-90-49 | [email protected]
FLANGED LUBRICATORS RENTAL, MAINTENANCE,SPARE PARTS
Equipment for hydraulic fracturing (ГРП) - equipment for coiled tubing
Application:All-metal flanged lubricator is designed for the connection of wellhead equipment having flanges made in accordance with GOST 28919-91 or API 6A. It is used mainly in the coiled tubing unit operation.
Advantages:• All-metal design that ensures high reliability when working at pressures of 70 and 105 MPa.
Main technical parameters:• NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16), 130 (5 1/8);• Operating pressure, MPa (psi): 70 (10000), 105 (15000);• Length, mm: 2000 (it is possible to manufacture all-metal lubricators with the length ranging from 500 to 2500 mm);• Operating medium: water, oil, oil products, alkalis, inhibited acid solutions,
proppant, cement and clay solutions;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
ЛФ 130х70 К1
Wellhead equipment rental We rent out the wellhead equipment for hydraulic fracturing (ГРП) and coiled tubing (ГНКТ):• Frac valves for hydraulic fracturing (ГРП), 70 and 105 MPa;• ЗМС ГРП (hydraulic fracturing) parallel slide gate valves, 70 and 105 MPa;• Wellhead strippers (washout straight-through spools);• Suspended spools;• All-metal flanged lubricators.
Wellhead equipment maintenance, inspection and repairWe carry out guarantee maintenance, inspection and repair of wellhead equipment for hydraulic fracturing (ГРП) that was manufactured by us or other domestic and foreign manufacturers.
Gate valve spare parts by foreign and Russian manufacturers
We produce spare parts to repair gate valves (70 and 105 MPa pressure), made by foreign and Russian manufacturers.
Equipment maintenance scheme:
Taking the equipment from the customer's warehouse
Pressure tests
Painting
Equipment delivery to the customer's warehouse
Carrying out the inspection and making the defect report
Replacement of components (repair)
Corrosion resistance category
Operating pressure, MPa NPS, mm
Flanged lubricator
vwww.uralsa74.ru28 29Product ordering : +7 (351) 729-90-49 | [email protected]
Isolation and control valves
ЗМС PARALLEL SLIDE GATE VALVES
L
H
B
L
H
B
L
H
B
L
H
B
W/o the reducer With the reducer
Designation NPS, mm
(in)Operating pressure
MPa (psi) Overall dimensions
H L BЗМС-50х35 50 (2 1/16) 35 (5000) 525 350 320
ЗМС-50х70 50 (2 1/16) 70 (10000) 700 520 400
ЗМС-50х105 50 (2 1/16) 105 (15000) 750 483 400
ЗМС-65х21ф 65 (2 9/16) 21 (3000) 535 350 320
ЗМС-65х21 65 (2 9/16) 21 (3000) 535 422 320
ЗМС-65х35ф 65 (2 9/16) 35 (5000) 535 350 320
ЗМС-65х35 65 (2 9/16) 35 (5000) 535 422 320
ЗМС-65х70 65 (2 9/16) 70 (10000) 775 565 500
ЗМС-65х105 65 (2 9/16) 105 (15000) 750 533 500
ЗМС-80х14 80 (3 1/8) 14 (2000) 740 359 400
ЗМС-80х21 80 (3 1/8) 21 (3000) 782 434 400
ЗМС-80х35 80 (3 1/8) 35 (5000) 782 473 400
ЗМС-80х70 80 (3 1/8) 70 (10000) 830 620 500
ЗМС-80х105* 80 (3 1/8) 105 (15000) 900 598 500
ЗМС-100х14 100 (4 1/16) 14 (2000) 810 435 500
ЗМС-100х21 100 (4 1/16) 21 (3000) 810 510 500
ЗМС-100х35 100 (4 1/16) 35 (5000) 930 549 500
ЗМС-100х70* 100 (4 1/16) 70 (10000) 1060 670 645
ЗМСР-100х105* 100 (4 1/16) 105 (15000) 1085 737 645
* These gate valves can be equipped with a single-stage reducer with the reduction ratio of 4.
Designation example:
ЗМС Р 80х70 К1
Application: Parallel slide gate valves with the metal-to-metal seal are designed for the shutdown of wellhead equipment, flow and injection wells. These valves are also used as part of BOP equipment.
Advantages:• Solid forged body ensures high reliability and minimum dimensions;• Gate shutoff is ensured by the constant seat compression;• Gate valves are equipped with the slide "open-closed" position indicator.
Main technical parameters:• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Gate shutoff class – А according to GOST 9544 - 2005;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Slide
Pressure controlvalve
Rod
Air valve
Seal pack
O-ring
Solid forged body
Flywheel
Seat
Drain plug
Shield
Corrosion resistance category
Operating pressure, MPa
NPS, mm
with the reducer
Oil-filled steel gate valve
vwww.uralsa74.ru30 31Product ordering: +7 (351) 729-90-49 | [email protected]
Isolation and control valves
L
H
�B
L
H
�B
Hydraulicactuator
• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature +120°С;• Gate shutoff class – А according to GOST 9544 - 2005;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation NPS, mm
(in)Operating pressure
MPa (psi) Overall dimensions
H L BЗМСГ-50х70 50 (2 1/16) 70 (10000) 1100 520 400
ЗМСГ-50х105 50 (2 1/16) 105 (15000) 1150 483 500
ЗМСГ-65х35ф 65 (2 9/16) 35 (5000) 930 350 320
ЗМСГ-65х70 65 (2 9/16) 70 (10000) 1170 565 500
ЗМСГ-65х105 65 (2 9/16) 105 (15000) 1150 533 500
ЗМСГ-80х35 80 (3 1/8) 35 (5000) 1195 473 400
ЗМСГ-80х70 80 (3 1/8) 70 (10000) 1235 620 500
ЗМСГ-80х105 80 (3 1/8) 105 (15000) 1300 598 500
ЗМСГ-100х35 100 (4 1/16) 35 (5000) 1350 549 500
ЗМСГ-100х70 100 (4 1/16) 70 (10000) 1470 670 645
ЗМСГ-100х105 100 (4 1/16) 105 (15000) 1505 737 645
Designation example:
ЗМСГ 100х35 К1
Application: Hydraulically-operated parallel slide gate valve is designed to ensure remote control of process systems and used for the shutdown of wellhead equipment; flow, oil and injection wells. These valves are also used as part of BOP equipment.
Main technical parameters:• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;
ЗМСГ HYDRAULICALLY-OPERATED PARALLEL SLIDE GATE VALVES
Slide
Lubrication valve
Rod
Air valve
Top seal pack
Bottom seal pack
Hand drive rod
O-ring
Solid forged body
Counter rod
Flywheel
Seat
Pressure controlvalve
Shield
Corrosion resistance category
Operating pressure, MPa
NPS, mm
hydraulically operated
Oil-filled steel gate valve
vwww.uralsa74.ru32 33Product ordering: +7 (351) 729-90-49 | [email protected]
Isolation and control valves
Main technical parameters:• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• УХЛ, ХЛ climatic category;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation NPS, mm
(in) Operating pressure
MPa (psi) Overall dimensions
H B a cДРУ-50х70 50 (2 1/16) 70 (10000) 640 320 225 230
ДРУ-50х105 50 (2 1/16) 105 (15000) 640 320 225 230
ДРУ-65х21ф 65 (2 9/16) 21 (3000) 640 320 215 230
ДРУ-65х35ф 65 (2 9/16) 35 (5000) 640 320 215 230
ДРУ-65х70 65 (2 9/16) 70 (10000) 690 320 225 278
ДРУ-65х105 65 (2 9/16) 105 (15000) 690 320 225 278
ДРУ-80х21 80 (3 1/8) 21 (3000) 690 320 225 278
ДРУ-80х35 80 (3 1/8) 35 (5000) 690 320 225 278
ДРУ-80х70 80 (3 1/8) 70 (10000) 690 320 225 278
ДРУ-80х105 80 (3 1/8) 105 (15000) 710 320 260 298
ДРУ-100х21 100 (4 1/16) 21 (3000) 710 320 260 298
ДРУ-100х35 100 (4 1/16) 35 (5000) 710 320 260 298
ДРУ-100х70 100 (4 1/16) 70 (10000) 710 500 260 298
ДРУ-100х105 100 (4 1/16) 105 (15000) 760 645 350 350
Designation example:
ДРУ 80х35 К1
H
a
c
�B
H
a
c
�B
Application: Adjustable angle throttle is used for smooth medium flow control based on measurement of radial space area between the needleand the seat when the tip is moving translationally due to flywheel rotation.
The throttle is used when fluid flow control in wellhead Christmas tree valves, blowout prevention equipment, main pipelines, pumping units is necessary.
Advantages:• All throttles are equipped with needle position indicators;• To extend life service, "seat-needle" throttle couple is made of ВК6 hard alloy.
ДРУ ADJUSTABLE ANGLE THROTTLES
Flywheel
Rod
Slide nut
Packing nut
Needle
Body
Position indicator
Seal pack
O-ring
Seat
Corrosion resistance category
Operating pressure, MPa NPS, mm
Adjustable angle throttle
vwww.uralsa74.ru34 35Product ordering: +7 (351) 729-90-49 | [email protected]
Isolation and control valves
ДНУ NON-ADJUSTABLE ANGLE THROTTLES
Designation NPS, mm (in)
Operating pressure MPa (psi)
Throttle type
Overall dimensionsH L a c
ДНУ-50х70 50 (2 1/16) 70 (10000)1 395 380 225 230
2 297 230 115 115
ДНУ-50х105 50 (2 1/16) 105 (15000)1 395 380 225 230
2 340 300 150 150
ДНУ-65х21ф 65 (2 9/16) 21 (3000)1 395 370 215 230
2 305 260 130 130
ДНУ-65х35ф 65 (2 9/16) 35 (5000)1 395 370 215 230
2 305 260 130 130
ДНУ-65х70 65 (2 9/16) 70 (10000)1 445 380 225 278
2 360 260 130 130
ДНУ-65х105 65 (2 9/16) 105 (15000)1 445 380 225 278
2 340 300 150 150
ДНУ-80х21 80 (3 1/8) 21 (3000)1 445 380 225 278
2 280 265 137,5 127,5
ДНУ-80х35 80 (3 1/8) 35 (5000)1 445 380 225 278
2 315 285 142,5 142,5
ДНУ-80х70 80 (3 1/8) 70 (10000)1 445 380 225 278
2 300 290 145 145
ДНУ-80х105 80 (3 1/8) 105 (15000)1 465 410 260 298
2 330 300 150 150
ДНУ-100х21 100 (4 1/16) 21 (3000)1 465 410 260 298
2 330 300 150 150
ДНУ-100х35 100 (4 1/16) 35 (5000)1 465 410 260 298
2 340 320 160 160
ДНУ-100х70 100 (4 1/16) 70 (10000)1 465 410 260 298
2 350 320 160 160
ДНУ-100х105 100 (4 1/16) 105 (15000)1 465 500 350 350
2 370 380 190 190
Designation example:
ДНУ-1 100х70 К1
à
ñ
Í
L
à
ñ
Í
L
H
a
c
L
H
a
c
L
Application:Non-adjustable angle throttle is used for stepwise control of oil and gas wells operation conditions.
It is used when stepwise flow rate control in wellhead Christmas tree valves, blowout prevention equipment, pipelines, pumping unit is necessary. Medium flow is controlled by replacement of choke inserts having different orifice sizes.
Advantages:• Throttle choke inserts may be replaced without device disassembly.
Main technical parameters:• Choke insert NPS is from 2 to 25 mm with 1 mm pitch;• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Type 1
Type 1
Type 2
Type 2
O-ring
Body
Choke insert
Corrosion resistance category
Operating pressure, MPa
NPS, mm
Throttle type (1, 2)
Non-adjustable angle throttle
vwww.uralsa74.ru36 37Product ordering: +7 (351) 729-90-49 | [email protected]
Blowout prevention equipment
CHOKE MANIFOLDS
Application: Choke manifold is a part of drilling manifold designed to provide solution circulation in oil and gas wells in the course of drilling and repair, to ensure safe work practices, to maintain required wellhead pressure, to prevent blowouts and spouter, to protect mineral resources and environment. URASPETSARMATURA Company designs and manufactures choke manifolds according to GOST 13862 "Blow-out preventer equipment" standard schemes and tailor-made customer's schemes.
Main technical parameters:• NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Operating pressure, MPa (psi): 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
БД-3 80х35 К1
KILL MANIFOLDS
Application: Kill manifold of drilling manifold is connected to drill pumps and used for injection of heavy-weight fluid to the wellhead through annular space (well kill operation). When necessary, kill manifold is used for draining of gas-cut drilling mud to degassing chamber of drill unit circulation system. URASPETSARMATURA designs and manufactures kill manifolds according to GOST 13862 "Blow-out preventer equipment" standard schemes and tailor-made customer's schemes.
Main technical parameters:• NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Operating pressure, MPa (psi): 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Operating medium temperature up to +120°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
БГ-3 65х70 К1Corrosion resistance category
Operating pressure, MPa
NPS, mm
Scheme number according to GOST 13865-90
Choke manifold Corrosion resistance category
Operating pressure, MPa
NPS, mm
Scheme number according to GOST 13862-90
Kill manifold
vwww.uralsa74.ru38 39Product ordering: +7 (351) 729-90-49 | [email protected]
Blowout prevention equipment
BLOWING LINES
Application: Blowing lines are designed for extraction of oil well fluid and gas to a safe distance from the wellhead during emergency spacing.
Blowing lines are manufactured in different modifications based on connection type:flange connections (through, threaded, welded), hub joints, quick-disconnecting joints.
Main technical parameters:• NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Operating pressure, MPa (psi): 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Blowing line length - from 1 to 10 m;• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
ЛВ 80/80х35-4 К1
BLOWOUT PREVENTION EQUIPMENT RENTAL
URALSPETSARMATURA Company rents out blowout prevention equipment to major workovers services, oil and gas producers and drilling operators: • Choke manifolds DN 65, 80, 100 mm, NP 35, 70, 105 MPa;• Kill manifolds DN 65, 80, 100 mm, NP 35, 70, 105 MPa; • Blowing lines DN 65, 80, 100 mm, NP 35, 70, 105 MPa; • ЗМСГ hydraulically operated gate valves DN 65, 80, 100 mm, NP 35, 70, 105 MPa;• ЗМС gear operated gate valves DN 65, 80, 100 mm, NP 35, 70, 105 MPa;• Adapter spools DN from 65 to 480 mm, NP 35, 70, 105 MPa.
Corrosion resistance category
Length, m
Operating pressure, MPa Flange 2 NPS, mm
Flange 1 NPS, mm
Blowing line
Flange 2
Flange 1
vwww.uralsa74.ru40 41Product ordering: +7 (351) 729-90-49 | [email protected]
Wellhead and blowout prevention equipment components
Type 1* Type 2
ADAPTER SPOOLS WELLHEAD CROSSES
Application:Adapter spools are designed for process equipment installation and flange size change. They are used as part of wellhead and blowout prevention equipment. These adapter spools are manufactured according to GOST 28919-91.
Main technical parameters:• Top and bottom flange NPS options, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16),
156 (6 3/25), 180 (7 1/16), 230 (9), 280 (11), 350 (13 5/8), 425 (16 3/4), 540 (21 1/4);• Operating pressure, MPa (psi): 14 (2000), 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Height up to 1200 mm;• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
КП 230х21/230х35 К1
Application:Wellhead crosses are designed to be used as part of wellhead and blowout prevention equipment. They are manufactured according to GOST 28919-91.
Main technical parameters:• Top and bottom flange NPS options, mm (in): 156 (6 3/25), 180 (7 1/16), 230 (9), 280 (11),
350 (13 5/8), 425 (16 3/4), 540 (21 1/4);• Side track NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Operating pressure, MPa (psi): 14 (2000), 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
КР 180/280/65х70 К1Corrosion resistance category
Bottom flange operating pressure, MPa
Bottom flange NPS, mm Top flange operating pressure, MPa
Top flange NPS, mm
Adapter spool Corrosion resistance category
Operating presure, mm
Side flange NPS, mm Bottom flange NPS, mm
Top flange NPS, mm
Wellhead cross
Top flange Top flange
Bottom flange
Bottom flange
Thread*
Side flange
* Bottom flange option is possible
vwww.uralsa74.ru42 43Product ordering: +7 (351) 729-90-49 | [email protected]
CONNECTOR ADAPTERS ELBOWS, TEES, CROSSES
Wellhead and blowout prevention equipment components
Elbow Tee Cross
Application:Connector adapters are designed for process equipment installation and flange size change. They are used as part of wellhead and blowout prevention equipment. These connector adapters are manufactured according to GOST 28919-91.
Main technical parameters:• Top and bottom flange NPS options, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16),
156 (6 3/25), 180 (7 1/16), 230 (9), 280 (11), 350 (13 5/8), 425 (16 3/4), 540 (21 1/4);• Operating pressure, MPa (psi): 14 (2000), 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
АП 65х70/180х21 К1
Application:Elbows, tees, crosses are fittings of wellhead and blowout prevention equipment enabling connection or disconnection of of medium flows at an angle of 90° in different directions. There are straight elbows, tees and crosses (with all sides having the same inside diameter), and reducing elbows, tees and crosses (with the sides having different inside diameter). They are manufactured according to GOST 28919-91.
Main technical parameters:• NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Operating pressure, MPa (psi): 14 (2000), 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Items may be manufactured with pressure gauge hole with К 1/2" or М20х1.5 thread;• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
К 80х70 К1Corrosion resistance category
Bottom flange operating pressure, MPa
Bottom flange NPS, mm Top flange operating pressure, MPa
Top flange NPS, mm
Connector adapter
Corrosion resistance category
Operating pressure, MPa
Connector type K - cross, T - tee, У - elbow
NPS, mm
Top flange
Bottom flange
vwww.uralsa74.ru44 45
М-Н sub
Supplementary oil and gas equipment
НКТ (tubing) coupling Н-Н sub
SUBS, COUPLINGS
Subs for tubing GOST 23979-80
Application:Subs are designed to connect tubing with different sizes between each other. They are also used for connection of underground equipment with tubing thread connection ends. Subs of the following types are manufactured: • П - transition (М-Н); • М - coupling; • Н - nipple.
Design features:Subs of all sizes of are manufactured according to GOST 23979-80. Subs are manufactured threaded according to the different standards: НКТ, R, G, foreign NPT and BSPT. Subs are manufactured with right and lest connection thread. The following types of subs are manufactured:• П - triangular threaded subs for connection of plain-end pipes and externally upset end pipes;• ПГ - buttress threaded subs for connection of plain-end gastight-high pipes;• ПБ - subs for connection of flush joint pipes and externally upset end pipes.
Strength groups: Д, К, Е, Л, М, Р * Subs may be manufactured according to the customer's technical requirements.
Drill - stem subs according to GOST 7360-82
Application:Subs are designed for connection of drill string components to each other as well as for connection of well-drilling tools thereto.Subs of all sizes of are manufactured according to GOST 7360-82.
Subs of the following types are manufactured: • П - transition;• М - coupling;• Н - nipple.
Strength groups: Д, К, Е, Л, М, Р * Subs may be manufactured according to the customer's technical requirements.
Tubing couplings as per GOST 633-80
Application:Couplings as per GOST 633-80 are used for quick and durable connection of casing and tubing. Coupling is a stab assembly of two pipe sections.
The parameters of the plain-end pipe couplings manufactured by our company are as follows:
NPS, mm Outside diameter D, mm Length L, mm Thread Weight, kg
40 56 96 НКТ 48 0,5
50 73 110 НКТ 60 1,3
62 89 132 НКТ 73 2,4
76 108 146 НКТ 89 3,6
89 120,6 150 НКТ 102 4,5
100 132 156 НКТ 114 5,1
The parameters of the upset end pipe couplings manufactured by our company are as follows:
NPS, mm Outside diameter D, mm Length L, mm Thread Weight, kg
40 63,5 100 НКВ 48 0,8
50 77,8 126 НКВ 60 1,5
62 93,2 134 НКВ 73 2,8
76 114,3 146 НКВ 89 4,2
89 127 154 НКВ 102 5
100 141,3 160 НКВ 114 6,3
Designation example:
П.М-М.НКТ89/НКТ73 К1Corrosion resistance category
Designation of output end thread Connector type: М-М – coupling-coupling, М-Н –coupling-nipple, Н-Н – nipple-nipple
Sub
Designation of input end thread
Product ordering: +7 (351) 729-90-49 | [email protected]
vwww.uralsa74.ru46 47
FLANGES
Application:Butt-welded and threaded steel tool flanges (NKT (tubing) thread as per GOST 633-80) are used as part of wellhead and blowout prevention equipment. They are manufactured according to GOST 28919-91.
Main technical parameters:• NPS, mm (in): 52 (2 1/16), 65 (2 9/16), 80 (3 1/16), 100 (4 1/16);• Operating pressure, MPa (psi): 14 (2000), 21 (3000), 35 (5000), 70 (10000), 105 (15000);• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
ФНКТ 65х35.НКТ73 К1
Application: Elbows, tees, and crosses are designed for connection of tubing used for oil and gas wells operation, installation of oil/gas pipeline, specifically, for pipeline turn and medium flow (water, oil, petroleum products, alkalies, inhibited acid solutions, cement slurries and clay muds) separation.
Connection thread as per GOST 633-80: НКТ 60, НКТ 73, НКТ 89, НКТ 114 There are two types of elbows, tees, and crosses: • coupling threaded (internal); • nipple threaded (external).
Main technical parameters:• Well conditions – oil, gas, natural gas liquid containing mechanical impurities up to 25 mg/l,
oil field water - up to 80% by volume;• Climatic category - УХЛ according to GOST 15150-69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Corrosion-resistant design: non-corrosive, corrosive К1 and К2.
Designation example:
К 65х105.МНКТ73 К1
ELBOWS, TEES, CROSSES FOR TUBING (НКТ) THREAD
Supplementary oil and gas equipment
Tubing flangeTubing (НКТ) tee
Tubing flangeTubing (НКТ) cross
Tool flangeTubing (НКТ) elbow
Corrosion resistance category
Designation of flange thread (for threaded flanges)
Operating pressure, MPa NPS, mm
Flange. C - welded, П - tool,
НКТ - threaded as per GOST 633-80, ТР - БРС threaded
Corrosion resistance category
Thread designation
Operating pressure, MPa Connector type: М – coupling, Н – nipple
K - cross, T - tee, У - elbow
NPS, mm
Product ordering: +7 (351) 729-90-49 | [email protected]
vwww.uralsa74.ru48 49Product ordering: +7 (351) 729-90-49 | [email protected]
GASKETS (O-RINGS)
Application: Gaskets (O-rings) are used for interflanged connection of wellhead and blowout prevention equipment components. Gaskets are manufactured according to GOST 28919-91.
Gasket designation Average diameter, D Height, h Width, b End face width, b1
П 23 82,5 16 11,1 7,7
П 24 95,2 16 11,1 7,7
П 26 101,6 16 11,1 7,7
П 27 107,9 16 11,1 7,7
П 31 123,8 16 11,1 7,7
П 35 136,5 16 11,1 7,7
П 37 149,2 16 11,1 7,7
П 39 161,9 16 11,1 7,7
П 45 211,1 16 11,1 7,7
П 46 211,1 18 12,7 8,7
П 49 269,9 16 11,1 7,7
П 50 269,9 21 15,9 10,5
П 53 323,8 16 11,1 7,7
П 54 323,8 21 15,9 10,5
П 57 381,0 16 11,1 7,7
П 65 469,9 16 11,1 7,7
П 66 469,9 21 15,9 10,5
П 73 584,2 18 12,7 8,7
П 74 584,2 24 19,0 12,3
Пф1 90 16 11,1 7,7
Пф2 92 18 9 8
Пф3 205 18 11,1 7,7
Пф4 228 16 11,1 7,7
Gasket designation
Outside diameter, D
End face outside diameter,
D1
Width,b
End face width, b1
Height, h
Bypass hole diameter, d
Rounding-off radius, R
БХ 152 84,7 83,2 10,2 8,8 10,2 1,6 1,0
БХ 153 100,9 99,3 11,4 9,8 11,4 1,6 1,0
БХ 154 116,8 115,1 12,4 10,6 12,4 1,6 1,2
БХ 155 148,0 145,9 14,2 12,2 14,2 1,6 1,2
БХ 156 237,9 235,3 18,6 16,0 18,6 3,2 1,6
БХ 157 294,5 291,5 21,0 18,0 21,0 3,2 2,0
БХ 158 352,0 348,8 23,1 19,9 23,1 3,2 2,0
БХ 159 426,7 423,1 25,7 22,1 25,7 3,2 2,5
БХ 160 402,6 399,2 13,7 10,4 23,8 3,2 2,0
БХ 162 475,5 473,5 14,2 12,2 14,2 1,6 1,2
БХ 163 556,1 551,9 17,37 13,1 30,1 3,0 3,0
БХ 164 570,5 556,3 24,58 20,3 30,1 3,0 3,0
БХ 165 624,7 620,2 18,5 14,0 32,0 3,2 3,0
БХ 166 640,0 635,5 26,1 21,6 32,0 3,2 3,0
БХ 167 759,4 754,3 13,1 8,0 35,9 1,6 3,2
БХ 168 765,2 760,2 16,0 11,0 35,9 1,6 3,2
Gasket material designation Steel grade, standard designation
Non-corrosive St 20 GOST 1050К1 12Х18Н9Т GOST 5632К3 10Х17Н13М3Т GOST 5632
h
b
�D
23�d
R
�D1
b1
h
b
�D
23�d
R
�D1
b1h
b
�D
R1,6
23�
b1
h
b
�D
R1,6
23�
b1
Supplementary oil and gas equipment
БХ gasket П gasket
vwww.uralsa74.ru50 51Product ordering: +7 (351) 729-90-49 | [email protected]
MUD BOXES (MUD BUCKETS)
Application: КГУ (114-16, 114-42, 114-45, 168-60) mud box (mud bucket) is used to prevent splashing, to collect and extract the liquids produced in the course of drilling process and workovers for NPS 60, 73 , 89, 102, 114 mm tubing to special tanks.
Main technical parameters:
КГУ-114-16 КГУ-114-42 КГУ-114-45 КГУ-168-60
Sealed pipes, mm 60-114 60-114 60-114 60-168
Mud box height H, mm 710 1250 1275 1400
Internal height, mm 540 1100 1130 1240
Inside diameter d, mm, 200 200 200 250
Width x length, mm 270 х 350 270 х 350 272 х 350 380 х 450
Volume, l 16 42 45 60
Stub pipe thread НКТ-60 НКТ-60 НКТ-60 «Ёрш» 75 Fluid operation pressure inside
the chamber, not more than, MPa 0,25 0,25 0,25 0,25
Wall thickness, mm 3 3 3 3
Weight, kg 18 22 24 44
Supplementary oil and gas equipment
ВПЭМ VALVE
VALVESAir valve Pressure control valve
Application:Straight-through pressure-gauge valve is designed to be used as shutoff device at valve bends and for pressure gauge connection. Pressure gauge can be safely replaced due to the bleed valve present in the straight-through valve. The valve can be manufactured internally and externally connection threaded.
Main technical parameters:• Climatic category – УХЛ according to GOST 15150–69;• Location environmental class - I according to GOST 15150–69;• Ambient air temperature from -60°С to +40°С;• Medium temperature up to +120°C.
Parameter name ВПЭМ 5×35 valve ВПЭМ 5×70 valve
Operating pressure, MPa 35 70
Connection thread Rс 1/2”; K 1/2”; М20×1.5
NPS, mm 5
Pressure control valve is designed for feeding of jointing paste to the internal cavities and assemblies of the item seal.
To prevent the medium from leaking through the valve, cap gate body equipped with cone-type band is provided.
Air valve is used to drain air fromthe equipment, to ensure completeness of lubricant fill-up.
vwww.uralsa74.ru52 53
DIES AND ANVILS FOR DRILLING TONGS
Supplementary oil and gas equipment
"Oil country" spider insert
Dies for ECKEL tongs
Die (anvil) for OIL COUNTRY-USA, ГКШ 1200, ГКШ 1500 hydraulic tongs
Nominal diameter of backed-up pipes, mm
Catalog No.Dimensions, mm. Steel
gradeL B b1 b2 b360 mm (2 3/8'') 65652-1 174 75 8,5 9 4,5
18 ХГТ 73 mm (2 7/8'') 65652-2 174 75 8,3 9 4,589 mm (3 1/2'') 65652-3 174 75 8,3 9 4,5
Nominal diameter of made-up and
uncoupled pipes, mm Catalog No.
Dimensions, mm SteelgradeL B h1 h2 b
60 mm (2 3/8'') 45293А 98 50 12,5 17,2 818 ХГТ
73 mm (2 7/8'') 45293В 98 50 12 16,9 8
Nominal diameter of made-up and uncoupled pipes, mm
Catalog No.Dimensions, mm. Steel
gradeA h a R60 mm ( 2 3/8'') 427 100 00 001 31,75 11,4 15 30,15
18 ХГТ
73 mm ( 2 7/8'') 427 100 00 002 31,75 11,5 15 36,5089 mm ( 3 1/2'') 427 100 00 003 31,75 11,4 15 44,4595 mm ( 3 3/4'') 427 100 00 004 31,75 11,26 15 47,60
104 mm ( 4 1/8 '') 427 100 00 005 25,40 8,9 10 52,4114 mm ( 4 1/2'') 427 100 00 147 25,40 9,9 10 ---
КМБ, КМБО, КМТ tongs die
Tongs gradeDimensions, mm Steel
gradeL B h b b1КМТ 80 25,4 10 8 8
18 ХГТ КМБ 76 30 12 8 10КМБО 137 30 12 8 10
Application: Pipe tong dies (anvils) and spider inserts (liners) are designed for slip-free coupling of pipe tongs jaws or spider slips with drill pipe, casing, or tubing surface. They have contoured surface for more intimate contact with pipe surface. They are consumable materials and shall be replaced as far as they become worn-out.
Nominal diameter of made-up and uncoupled pipes, mm
Catalog No.Dimensions, mm Steel
gradeL B h b b189 mm (3 1/2'') 45293С 98 25 10 8 9
18 ХГТ 95 mm (3 3/4'') 45293К 58 25 10 8 9
114 mm (4 1/2'') (with the groove) 45293D 37 25 10 8 9for the MS manual retaining device (with the groove) 45209 58 25 10 8 5
Product ordering: +7 (351) 729-90-49 | [email protected]
vwww.uralsa74.ru54 55
CERTIFICATES CONTACT DETAILS
E-mail: dir@uralsa74. ru Tel. +7 (351) 729-90-49
Andryushchenko Mikhail AndreyevichGeneral Director
Tel.: +7 (351) 729-90-49 ext. 102E-mail: [email protected]
Tel.: +7 (351) 729-90-49 ext. 112E-mail: [email protected]
454082, Chelyabinsk, 74 Troitskiy Trakt Str.
INN (personal tax reference number): 7451365960
Tel.: +7 (351) 729-90-49
Fax: +7 (351) 216-17-20
E-mail: info@uralsa74 ru
E-mail: andr. am@uralsa74. ruTel. +7 (351) 729-90-49 ext. 101Cell. +7 950-741-96-77
E-mail: kirill-andr@uralsa74. ruTel. +7 (351) 729-90-49 ext. 112
Andryushchenko Artyom MikhailovichDeputy General Director
Andryushchenko Kirill MikhailovichHead of Procurement Department
Sales Department:
Procurement Department:
Address:
Product ordering: +7 (351) 729-90-49 | [email protected]
Tel.: +7 (351) 729-90-49 | E-mail: [email protected]