PRODUCT CATALOG - Bremcobremco.co.uk/wp-content/uploads/2015/09/GRAY-CATO.pdf · innovative...

INNOVATIVE SOLUTIONS© SINCE 1952

GRAY MANUFACTURINGCompany, Inc. • St. Joseph, Missouri

PRODUCT CATALOGFACTORY DIRECT SALES & SERVICE



BUY FACTORY DIRECT GRAYUSA.COM

COMPANY, INC. • ST. JOSEPH, MISSOURI

• Over 50 Gray patents granted since 1921

• Third generation family owned business

• All Gray products are made in the U.S.A.

GRAY MANUFACTURING

2

GRAY MISSION STATEMENT:To design, manufacture, sell and service with pride, innovative,

high quality and reliable professional service equipment for the

automotive, truck and service vehicle industries.

CORPORATE VALUE STATEMENTS:• Exist to serve our customer

• Pride in our USA manufacturing, workmanship, and ingenuity

• Family owned, operated and oriented work environment

• Encourage and provide an environment, which fosters trust, teamwork and personal growth

• Involvement and leadership within our community

HOURS OF OPERATION

800.821.7320 • 816.233.7251 fax

Monday - Thursday 7:00am - 6:00pm, CSTFriday 7:00am - 5:00pm, CST

GRAY MANUFACTURING CO., INC.3501 S. Leonard Rd.

St. Joseph, Missouri 645303

INNOVATIVE SOLUTIONS® SINCE 1952

TABLE OF CONTENTS

Wireless Portable Lift System 6-9

Wheel Lift Systems 10-11

Heavy Duty Floor Service Jacks 12

Truck Service Lifts 13

Vehicle Support Stands 14-15

Truck Air Jack Stands 16

Portable Non-Skid Truck Ramps 17

Heavy Duty Shop Presses 18-19

Floor Cranes 20

Portable Air End Lift 21

Heavy Duty Transmission Jack 22

Heavy Duty High-Rise Transmission Jack 23

High-Rise Automotive Transmission Jack 24

Heavy Duty Component Jacks 25

Wheel Dollies 26

Tubeless Truck Tire System 27

Oil Filter Crushers 28

Air Powered Fluid Handlers 29

Heavy Duty Forklift Jacks 30

Heavy Duty Two/Four Post Lifts 31

3

LIFETIMEWARRANTYGray Manufacturing Company, Inc. warrants to

the original purchaser against non-conformities

in materials and workmanship for the life of the

product.

VALUE ADDEDPROTECTIONAll Gray Manufacturing Company, Inc. products

include an additional limited warranty period

protection against normal wear and tear.

INNOVATIVE SOLUTIONS® SINCE 1952GRAY MANUFACTURING

4 BUY FACTORY DIRECT GRAYUSA.COM

Along with designing and manufacturing the product, we also sell it factory direct to the person who actually uses it. Because of this, we know our customers better than anyone else. This customer relationship is what drives us to develop the best and most innovative products possible. Whether you need new equipment or OEM replacement parts, we have knowledgeable representatives ready to assist you.

We direct all resources toward making our customers’ jobs easier by providing reliable, innovative products. That’s what we’ve done in the past and that’s what we will continue to do. Anything we can do to keep a customer’s business up and running, we do. When our customers talk, we listen; these conversations have made us who we are today and we won’t forget that.

Our customer service and technical support begins, not ends, at the point of sale. Since 1952, we’ve backed our equipment with a commitment to quality service throughout the life of our products and beyond. That’s what you expect from an industry leader and that’s what we do. Whether you choose to repair it yourself or send it back to us, we are here to help.

Buy Factory Direct from Gray Manufacturing

We Exist to Serve our Customer

Unsurpassed Customer Service & Technical Support

FACTORY DIRECTSALES & SERVICE SINCE 1952

For customer service, technical support, or OEM replacement parts, please call our Customer Support Hotline – 800-821-7320

Service When Our Customers Need ItOur tradition of service is just for you, a Gray customer, and it begins, not ends, at the point of sale. For more than 50 years, we’ve backed up our equipment with a commitment to quality service throughout the life of our products. That’s what an industry leader does. Our equipment is built to last, but when you do need maintenance or repair, the process will be easy and economical.

If you choose to repair it yourself, a Gray service representative will guide you through each step. If you choose to send it to our factory, our service technicians will make the repairs quickly. We will provide an estimate and return your equipment in a timely manner. Either way, we’ll get you back to business as usual in record time.

Your business needs shorter downtimes. Our equipment features modular designs, making repairs easy, and since we manufacture all our own parts we will have what you need when you need it.

Service Your Way

We’re Here for You

Right here in the Heartland...for You, Our Customer

5800.821.7320 • 816.233.7251 fax

CUSTOMER SERVICE

Our product stays in our hands from concept to production because we have learned what our customers need. Our staff engineers design, oversee production and test all products so we can give our customers equipment that provide years of trouble-free performance.

PATENTED WIRELESS PORTABLE LIFT SYSTEM

Improve productivity and flexibilityWireless feature enables technicians to:• Get set-up FASTER… • Get the vehicle up FASTER… • Get the job done FASTER!

WIRELESS CONTROL SYSTEM:Each lifting unit comes complete with a control console capable of operating the entire lift system. The control console is programmed to exchange data on a dedicated wireless communication channel that is licensed to meet FCC and IC requirements by a third party independent testing laboratory. This proven and secure digital wireless system provides constant communication between the lifting units.

SELF CONTAINED DC POWER SOURCE PROVIDES GREATER SHOP FLEXIBILITY:• No high voltage requirements

• Eliminates the hidden up-front power installation costs

• Allows technicians to take the lifting system to the job

• No worries about interrupted power service

• A 110 volt on-board multi-stage charging system is built in to each unit. Simply plug in to an ordinary 110 outlet to recharge the power system. The charger is rated at an input of 120VAC 1Amp.

U.S. Patent numbers US Pat. 6,634,461 • 7,014,012 • 7,214,770

Canadian Patent number 2,406,340


PATENTED WIRELESS PORTABLE LIFT SYSTEM

FEATURES INCLUDE:• The Patented Gray Wireless Portable Lift System provides your technicians an average work height of 74 inches free- and–clear access under the vehicle. No cables to connect, navigate around, roll over or replace.

• 16 channel capable operating system

• Moving and aligning individual lift units is made easy by virtue of the precise balanced design, spring loaded wheel components and the versatile lift and steer handle design.

• The system maintains synchronization employing digital encoders to ensure maximum reliability.

• Integral holding valve provides precise control.

• ALI Certified.

• Automatic down stops.

• 12 volt Deep Cycle Absorbent Glass Mat battery(s).

7

Lift & Steer Handle 16 Channels Down Stops

F E A T U R E S

800.821.7320 • 816.233.7251 fax

PATENTED WIRELESSPORTABLE LIFT SYSTEM

U.S. Patent numbers US Pat. 6,634,461 • 7,014,012 • 7,214,770

Canadian Patent number 2,406,340

Available Hi-Rise accessories for use with the WPLS Vehicle Support Stands • Heavy Duty Transmission • Clutch Jack/Component Jack • Wheel Dolly • Fluid Handlers

CHOOSE FROM THREE ALI CERTIFIED MODELS

Use in sets of 2, 4, 6 or 8


SPECIFICATIONS Fleet Heavy Commercial Wide MilitaryCapacity 16,000 lbs 18,000 lbs 18,000 lbsAverage Work Height 74” 74” 74”Power 12 volt 24 volt 24 voltCharging Voltage 110v 110v 110vAverage Lift Cycles 12-14 18-22 18-22Handle Design Pallet Jack Pallet Jack Pallet JackCarriage Type Fixed Fixed AdjustableMin Tire Diameter (w/adapter) 14” 14” 15”Max Tire Diameter 24.5 24.5 16.00R20Configuration 2-4-6-8 2-4-6-8 2-4-6-8

Manufactured in USA • Specifications are subject to change without notice.

ELS-90ACB-24

AH-15OH-15

Light Kit

Available Hi-Rise accessories for use with the WPLS Vehicle Support Stands • Heavy Duty Transmission • Clutch Jack/Component Jack • Wheel Dolly • Fluid Handlers

9800.821.7320 • 816.233.7251 fax

Forklift Adapter

WDH-12

9-THR

HR-300 HTCJ-2000

U.S. Patent # D357,106 & 5,484,134

10

Lifts one end of a wide array of vehicles, fire or refuse trucks, heavy recreational vehicles or motor coaches. Wide, spring loaded base provides stable platform for secure lifting.

WHEEL LIFT SYSTEMS• Portable design eliminates the need for a dedicated bay• No more time wasted removing aerodynamics or ferrings from the vehicle• Perfect solution for shops with low ceilings• 100% Air Operated


SPECIFICATIONS WL-40 WL-30 WL-20Capacity per Set of Two 40,000 lbs 30,000 lbs 20,000 lbsMinimum Start Height Floor Level Floor Level Floor LevelMaximum Lift Height 30” 24” 24”Power Shop Air Shop Air Shop AirRequired Air Pressure 160 PSI 160 PSI 160 PSIStroke 30” 24” 24”Minimum Wheel Diameter [w/Adaptors] 14” 16” 16”Minimum Wheel Diameter [w/o Adapters] 21” 19 1/2” 19 1/2”Maximum Wheel Diameter 24 1/2” 24 1/2” 24 1/2”Overall Width 45” 41 9/16” 41 9/16”Overall Depth 44” 44 1/4” 44 1/4”Overall Height 63” 53 1/4” 53 1/4”Shipping Weight 1,965 lbs 1,500 lbs 1,000 lbs


11

F E A T U R E S

Built-in vehicle support stand feature allows complete open

access under the vehicle.

Small Wheel Adapters

WL-40 features:• Easily handles wheel sizes from 21” to 24.5”• Small Wheel Adapters Included to accommodate 14” to 21” wheels

WL-20 & WL-30 features:• Easily handles wheel sizes 19.5” to 24.5”• Optional small wheel adapters available to accommodate 16” to 19.5” wheels

Dual trigger control valve allows synchronized raising and lowering of vehicle.

800.821.7320 • 816.233.7251 fax

WL-4020 Ton Capacity



BUY FACTORY DIRECT GRAYUSA.COM12

FLOOR SERVICE JACKS• A low start height combined with a high lift height accommodates a variety of vehicles

• Heavy duty steel frame design stands up to the most vigorous shop use

• Manual pump feature included

• Large front wheels and long-life heavy duty rear swivel casters allows ease of portability and durability

3 Ton Manual/HydraulicPowered ModelAlso Available!

Gray Vehicle Support Stands shown in use (page 14).FSJ-120

6 Ton Capacity

FSJ-20010 Ton Capacity

HEAVY DUTY

SPECIFICATIONS FSJ-120 FSJ-200Max. Capacity 12,000 lbs 20,000 lbsMin. Start Height 4 3/4” 7”Max. Lift Height 23 1/4” 27”Power Air/Hydraulic/ManualRequired Air Pressure 90-175 PSI 90-175 PSIChassis Height 9 3/4” 10”Chassis Length 48” 53 1/2”Handle Length 47 3/4” 47”Overall Width 18 1/2” 21 7/8”Overall Length 95 1/4” 101 3/4”Overall Reach 87” 93”Front Caster Diameter 4 1/3” 5”Rear Swivel Caster Diameter 4” 4”Saddle Diameter 7 3/8” 8”Front Width Caster to Caster 16 7/8” 17 1/8”Rear Width Bracket to Bracket 19 7/8” 20 1/8”Shipping Weight 256 lbs. 410 lbs.

Manufactured in USASpecifications are subject to change without notice.

800.821.7320 • 816.233.7251 fax

TRUCK SERVICE LIFTSAIR/HYDRAULIC

13

TSL-50S50,000 lbs

Capacity

• Unique QuickLift® Feature - internal design raises the ram to the load at a quicker rate of speed• Low starting height of 8” allows for easy positioning and spotting underneath low profile vehicles• Air ram retract utilizes shop air to reset the ram back to minimum starting height • Field ready design makes it ideal for road service work

Black Armor Coating™Protects the ram from rust and corrosion to extend longevity of product

Anti-Corrosive SystemThe distinctive design of the internal system protects the hydraulic system to extend product life

Gray Vehicle Support Stands shown in use (page 15).

TSL-5050,000 lbs Capacity

TSL-50LP50,000 lbs Capacity

TSL-7070,000 lbs

Capacity

SPECIFICATIONS TSL-50Capacity 50,000 lbs.Minimum Start Height 8”Maximum Lift Height 21”Power Source Air/HydraulicRequired Air Pressure 90-200 PSIStroke 5 1/8”Extension Screw Adjustment 4 7/8”Frame Width 12”Frame Length 20”Wheel Diameter 8” Handle Length 53”Shipping Weight 124 lbs.


SPECIFICATIONS TSL-70Capacity 70,000 lbs.Lift Pad Start Height 9 1/4”Lift Pad Start Height with Adapter 11 7/8”Power Stroke 5 1/8”Screw Adjustment 5”Maximum Lift Height 22”Air Pressure Requirements 110-200 PSILength (Handle Horizontal) 71”Width at Wheels 14 1/4” Overall Height (Handle Vertical) 58 1/2”Weight 146 lbs.


SPECIFICATIONS TSL-50SCapacity 50,000 lbs.Minimum Start Height 8”Maximum Lift Height 21”Power Source Air/HydraulicRequired Air Pressure 90-200 PSIStroke 5 1/8”Extension Screw Adjustment 4 7/8”Frame Width 12”Frame Length 20”Wheel Diameter 8” Handle Length 23”Shipping Weight 124 lbs.


SPECIFICATIONS TSL-50LPCapacity 50,000 lbsMaximum Air Pressure 200 PSIStarting Height 8 9/16”Starting Height w/Short Lift Pad Extension 11”Starting Height w/Tall Lift Pad Extension 13 11/16”Starting Height w/Short & Tall Lift Pad Extensions 16”Lifting Height 13 5/8”Lifting Height w/Short Lift Pad Extension 16 3/16”Lifting Height w/Tall Lift Pad Extension 18 13/16”Lifting Height w/Short & Tall Lift Pad Extensions 21 1/8”Stroke 5 1/8”Weight 120 lbsLift Pad Diameter 3 1/2”


14

Sold in PairsDesigned for use on forklifts,

but versatile enough for any job.

Sold in Pairs - A strong addition to any shop.

Gray Vehicle Support Stands

with Model FSJ-200.

All models feature the following:• Tabbed bottom to provide superior stability• Pin hole design provides multiple height positions

VEHICLE SUPPORT STANDS

7-TF

10-TF

7-THF

ALL Vehicle Support Stands

NOW Meet 2011 P.A.L.D

Standards

10-THF


SPECIFICATIONS 7-TF 7-THFCapacity (Each) 15,435 lbs 15,435 lbsMinimum Start Height 91/2” 12”Maximum Lift Height 16” 20”Adjustment Increments 1” 1”Shipping Weight per Pair 32 lbs 38 lbs


SPECIFICATIONS 10-TF 10-THFCapacity (Each) 20,000 lbs 20,000 lbsMinimum Start Height 20” 30”Maximum Lift Height 32” 52”Adjustment Increments 1” 1”Shipping Weight per Pair 70 lbs 158 lbs


15

Sold Individually

Sold in Pairs - Hefty capacity great for loaded trailers.

Model 9-THR High-Rise vehicle support stands working with Gray’s Patented Wireless Portable Lift System

High-Rise Vehicle Support StandThe easily adjustable Gray 9-THR High-RiseVehicle Support Stand features:• Gas-spring assisted lift post• 51/2” lift pad screw adjustable range• Heavy duty urethane wheels• ETL Listed

Features include:• Air assisted stand post positioning

• Dual retention pin system

• Removable handle

• Built-in wheels for ease of portability

Gray Vehicle Support Stands with Model TSL-50

35-T

9-THR

35-TH

25-THF25-TF

800.821.7320 • 816.233.7251 fax

SPECIFICATIONS 25-TF 25-THFCapacity (Each) 50,000 lbs 50,000 lbsMinimum Start Height 12” 20”Maximum Lift Height 20” 32”Adjustment Increments 11/2” 11/2”Shipping Weight per Pair 62 lbs 112 lbs


SPECIFICATIONS 9-THRCapacity (Each) 18,000 lbsMinimum Start Height 483/4”Maximum Lift Height 84”Adjustment Increments 23/4”Screw Extension 51/2”Shipping Weight 145 lbs

Manufactured in USASpecifications are subject to change

without notice.

SPECIFICATIONS 35-T 35-THCapacity 35 tons 35 tonsStart height 201/4” 319/16”Maximum height 323/4” 553/8”Post adjustment 1” increments 1” incrementsSupport pad diameter 5” 5”Weight 136 lbs 194 lbsSupport post weight 50 lbs 70 lbsBase foot print 13” x 13” 151/2” x 151/2”Overall foot print 13” x 173/8” 151/2” x 193/4”


TRUCK AIR JACK STANDS

TAJS-200010 Ton Capacity

• The perfect solution for spring work!

• Built-in vehicle support stand feature

• 100% Air Operated

Removable handle along with two wheels allows ease in spotting and portability

TAJS-300015 Ton Capacity

Easy-to-use air rocker valve that provides smooth and precise raising and lowering control

Optional air valvetee connectoravailable


SPECIFICATIONS TAJS-2000 TAJS-3000Capacity 20,000 lbs 30,000 lbsMin. Start Height 17 1/2” 17 5/8”Max. Lift Height w/extension 52 1/2” 52 1/4”Max. Lift Height w/o extension 37 1/2” 37 1/4”Cylinder Bore 12” 14”Required Air Pressure 200 PSI 200 PSIOverall Length w/o Handle 19” 25 1/2”Overall Length w/ Handle 48” 58 1/2”Wheel Diameter 5” 5”Stroke 10” 10”Inside Saddle Width 4 1/2” 4 3/4”Overall Saddle Width 5 1/4” 5 1/2”Extension Tubes Square SquareHandle Length 29” 36 1/2”Shipping Weight 138 lbs. 230 lbs.


TRUCK RAMPS PORTABLE NON-SKID

• Skid proof design utilizes a bonded 2-ply rubber matting to secure ramp to the floor

• Low clearance design accommodates low profile vehicles

• Easily maneuvered with long retractable T-handle and two wheels

• Handles Super Single tires

PTRW-2015” Width (Sold in Pairs)

800.821.7320 • 816.233.7251 fax 17

SPECIFICATIONS PTRW-20Capacity (Each) 20,000 lbsOverall Length 51”Overall Height 9”Overall Width 181/2”Tread Width 15”Handle Length 341/2”Wheel Diameter 5”Shipping (per pair) 340 lbs


without notice.

18

HEAVY DUTY SHOP PRESSES4-Way mountableair/hydraulic pump

Side-to-Side ramadjustments withlocking capabilities.

Safety Guards Available

Hand operated air valve is connected to a 54” air hose.

Air PoweredRam Retract

SP-7575 Ton Capacity


19

Accessory Kit:153/4” V-Blocks & 2” Diameter Push Adapters

Combines Speed & Precision

• SpeedDesigned to accelerate the ram to the load

• PrecisionInternal power system designed to eliminate ram over travel

• Power SourceManual or Air/Hydraulic models available

BSP-1010 Ton Capacity



800.821.7320 • 816.233.7251 fax

SPECIFICATIONS SP-75Capacity 75 TonsPower Source Air/HydraulicStroke 131/8”Horizontal Ram Travel 32”Throat Width 50”Inside Throat Depth 8”Outside Throat Depth 14”Required Air Pressure 120-200 PSIBolster Adj. Increments 6”Vertical Throat Minimum 91/2”Vertical Throat Maximum 391/2”Overall Depth 44”Overall Width 78”Overall Height 85”Floor Space Dimensions 62” x 44”Shipping Weight per Pair 1,845 lbs


without notice.

SPECIFICATIONS BSP-10Capacity 20,000 lbsCylinder Stroke 10”Weight 130 lbsOverall Foot Print 251/8”x 71/8”


without notice.

SPECIFICATIONS SP-25Capacity 50,000 lbsCylinder Stroke 61/4”Weight 510 lbsAdjustments 41/4” IncrementsOverall Foot Print 401/2”x 703/8”


without notice.

SPECIFICATIONS SP-10Capacity 20,000 lbsCylinder Stroke 10”Weight 180 lbsAdjustments 6” IncrementsOverall Foot Print 251/8”x 28”


without notice.

Models Shown with Optional Guards

20

FLOOR CRANES

LL-60006,000 lb. Capacity

SC-4404,400 lb. Capacity

• Folds for compact storage

• Legs adjust for clearance

• Manual or Air/Hydraulic

SC-2202,200 lb. Capacity


SPECIFICATIONS SC-220 SC-440Capacity (retracted) 2,200 lbs 4,400 lbsCapacity (center) 1,900 lbs 3,800 lbsCapacity (extended) 1,650 lbs 3,300 lbsMax. Boom Height (retracted) 114” 119”Max. Boom Height (extended) 125” 130”Overall Boom Height (horizontal) 83” 84”Boom Reach (retracted) 33” 35 3/4”Boom Reach (extended) 48” 50 3/4”Overall Length 82” 82”Min. Throat Width 22” 22”Leg Length (inside) 55” 55”Inside Leg Width (3 positions) 22” 22’ 36” 36” 50” 50”Leg Height 8 1/8” 8 1/8”Wheel Diameter 6” 6”


SPECIFICATIONS LL-6000Capacity 6,000 lbsWeight 74 lbsSpread 30” - 46”Adjustment Increments 4”Overall Height 15 3/8”Overall Width 5”Tilt Adjustment 30˚ MaximumChain Grade 80


without notice.

21

AIR END LIFTPORTABLE

• 30” Power Stroke • 100% Air Operated

• 10 Ton Capacity

Large pneumatic wheels enable easy maneuvering

Adjustable lifting saddles can easily be raised and extended to a variety of positions

Gray Vehicle Support Stands shown in use (page 14)

Large sturdy base stabilizes the load

KL-20KwikLift®

10 Ton Capacity

800.821.7320 • 816.233.7251 fax

SPECIFICATIONS KL-20Capacity 20,000 lbsStroke 30”Minimum Start Height 14”Maximum Lift Height 50”Power AirRequired Air Pressure 200 PSIForward Reach (CL to CL) 17”Overall Length 43”Overall Width 37”Overall Height 65”Saddle Spread 32” - 43”Shipping 755 lbs


without notice.

22

TRANSMISSION JACKHEAVY DUTY

• Heavy duty casters stand up to the rigorous shop use

• Large head plate accommodates a variety of different size components

• Narrow frame provides excellent balance without occupying excessive floor space

• Optional adapters available (see page 23)

Four adjustable quick ratcheting brackets

Fore/Aft tilt adjustments

Easily cradles bulky awkward components

Air/Hydraulic Powered Model Also Available!

MM-2000SManual/Hydraulic Powered


SPECIFICATIONS MM-2000S & MM-2000A/HSCapacity 2,206 lbs.Minimum Start Height 8”Maximum Lift Height 34”Power Manual/Hydraulic or Air/HydraulicRequired Air Pressure 90-200 PSIPower (Ram) Travel 26”Head Plate Dimension 11 1/2” x 17”Tilt Forward 10˚Tilt Rear 10˚Tilt Side to Side 10˚ Overall Width 28 1/4”Overall Length 44 1/2”Handle Length 24 1/4”Caster Diameter 4”Shipping Weight 305 lbs.


23

HEAVY DUTY HIGH-RISETRANSMISSION JACK

• Low 30” start height allows for maneuvering under low obstructions

• 2-stage design: 1st stage 100% air operated for speed; 2nd stage air/hydraulic for precise control

• Lockable/steerable casters provide ease when maneuvering throughout the shop

• Large head plate accommodates a variety of different size components

Optional Adapters for 2000 series transmission jacks:

Retractabletow handle

FR Series Eaton® Fuller® Roadranger® Transmission Adapter

Clutch AdapterAlso available: Flywheel Adapter and Break Drum Adapter

Differential Adapter

Truck Component Handling System included

Head rotates 360˚, fore and aft tilt, locking capability and four adjustable quick ratcheting brackets

HTCJ-20002,206 lbs Capacity

800.821.7320 • 816.233.7251 fax

SPECIFICATIONS HTCJ-2000Capacity 2,206 lbs.Minimum Start Height 30”Maximum Lift Height 72”Air Stage Stroke 16”Air/Hydraulic Stroke 26”Power 1st Stage - Air 2nd Stage - Air/HydraulicRequired Air Pressure 110 PSIHead Plate Dimensions 11 1/2”x17”Head Rotation 360˚Tilt Forward 10˚Tilt Rear 10˚Tilt Side to Side 10˚Overall Width 42”Overall Height 34 1/2” Overall Length 49 5/16” Handle Length 44 1/2”Caster Diameter 8”Shipping Weight 670 lbs.


HTJ-10001,000 lb. Capacity

• 2-stage design: 1st stage 100% air operated for speed; 2nd stage hydraulic for precise control

• Swivel casters make for easy maneuverability

• Nylon Speed-Strap™ quickly and conveniently secures the load

• Heavy duty acme threaded screws provide greater bearing surface for easier tilt adjustments

All-Purpose Adapter KitEnables removal of

transmission and transfer case as one unit and

allows for easy removal of front wheel drive

transaxles.

#45 Adapter 4 ratcheting adapters stabilize irregular-

shaped transmission pans allowing one-person removal

and installation.

Northstar® Adapter for 4T80E Units stabilizes the pre-2000 model transmissions with only one mechanic by connecting to the side of the transmission in the provided bolt hole pattern.

#90 AdapterDesigned for the vehicles where the exhaust passes next to the transmission pan prohibiting easy transmission removal.

Rated #1 by theProfessional R&D

Technicians

Optional 2”height adapter

Four quick ratchetingbrackets

Easy grip crank knobs

TRANSMISSION JACKHIGH-RISE AUTOMOTIVE


SPECIFICATIONS HTJ-1000Capacity 1,000 lbsMinimum Start Height 341/2”Maximum Lift Height 72”Power 1st Stage - Air 2nd Stage - HydraulicHead Plate Dimensions 111/2”x111/2”Overall Width 41”Overall Length 41”Swivel Caster Diameter 4”Required Air Pressure 90 to 160 PSITilt Forward 40˚Tilt Rear 20˚Tilt Side 10˚Shipping 125 lbs


without notice.

• Head rotates 360˚ allowing flexibility and convenience during installation and removal of clutches

• Hydraulic power system provides precise adjustment

• Swivel casters permit easy movement

• Fold back feature allows technician to remove jack from Flywheel Adapter

Battery Tray

• Foot pedal controls allow hands-free operation

• 2-stage design: 1st stage 100% air operated for speed; 2nd stage hydraulic for precise control

TCJ-500300 lb Capacity

Floor Model

HR-300300 lb CapacityHigh Rise Model

Optional Adapters Available:• 1-3/4” Spline for 1” or .983” hub pilot sizes• Flywheel adapter

Model TCJ-500 only• 12” height extension adapter • Brake Drum Hub adapter

U.S. Patent # 6,189,864,B1

800.821.7320 • 816.233.7251 fax 25

SPECIFICATIONS TCJ-500Capacity 300 lbs.Minimum Start Height 15”Maximum Lift Height 39”Overall Width 22”Overall Length 41”Supplied Spline Shaft 2”Swivel Caster Diameter 3”Head Rotation 360˚Shipping Weight 134 lbs.


without notice.

SPECIFICATIONS HR-300Capacity 300 lbs.Minimum Start Height 40”Maximum Lift Height 80 1/2”Power 1st Stage - Air 2nd Stage - HydraulicHead Rotation 360˚Width 41”Length 41”Supplied Spline Shaft 2”4 Swivel Casters 4”Required Air Pressure 100-160 PSIShipping Weight 105 lbs.


without notice.

COMPONENT JACKSHEAVY DUTY

26

• Offset column allows for open work space when removing wheel assemblies

• 3 swivel casters provide great portability when moving wheel assemblies throughout the shop

• Combines fore/aft with side-to-side tilting adjustments

• Air assisted hydraulic power system

Optional smallwheel adapter

Removableparts tray

Both Models Feature:

Flexible design works with both super single and dual wheel assemblies

Handles a variety of tire and wheel assemblies including truck, aircraft, ground support and farm equipment applications

Internal bearings provide smooth rotation of the arms for aligning wheel assemblies to hubs

WD-150S1,500 lb. Capacity

Floor Model

WDH-121,200 lb. CapacityHigh Rise Model


WHEEL DOLLIES

SPECIFICATIONS WD-150SCapacity 1,500 lbsMaximum Lift Height 8”Power HydraulicLift Arm Spread 24”Forward Tilt 2˚Rear Tilt 5˚Overall Length 39”Overall Width 36”Overall Height 30”Chain Length 72”Shipping 120 lbs


without notice.

SPECIFICATIONS WDH-12Capacity 1,200 lbsMaximum Lift Height 51”Power Air Assist/HydraulicLift Arm Spread 24”Forward Tilt 4˚Rear Tilt 4˚Side to Side Tilt +/-2.875Overall Length 521/4”Overall Width 421/2”Overall Height 1233/8”Chain Length 72”Shipping 455 lbs


without notice.

27

• Simple operator controls from one central location

• Incorporates a bead loosening system with mount/demount capabilities

• Eliminates bead damage and easily handles difficult dual beaded steel radials

• Unique lift table eliminates lifting of tire assembly

• Non-slip rim lock system ensures positive rim locking

Designed with a protection system that guards against damage to aluminum rims

The rim and tireassembly is automaticallyraised and loweredinto position by a push of a lever

Tools included with the machine:•Bead Lifting Prybar•Mount/Demount Tool •Bead Retention Tool

Two optional adaptors for super single tires - the top tool is for dedicated use

and the bottom is for occasional use

800.821.7320 • 816.233.7251 fax

TRUCK TIRE SYSTEMHEAVY DUTY TUBELESS

2100

SPECIFICATIONS 2100Power 2HP 220 Single PhaseMaximum Wheel Diameter 19 1/2”Maximum Wheel Diameter 24 1/2”Maximum Outside Tire Diameter 48”Maximum Wheel Width 15”Rotational Torque 3,483 ft. lbs. @ 1,500 PSIFoot Print Dimensions 70” x 71 1/2”Shipping Weight 1,350 lbs.


without notice.

OIL FILTER CRUSHERSHEAVY DUTY QUICKPAC® SPIN-ON

Both Models Feature:• Accommodates up to 4 automotive spin-on oil filters• Interlocking feature prevents door from opening until the ram is fully retracted• Removable catch basin allows crusher to be cleaned periodically• 100% air operated • Mounting stand included and no complicated set-up or installation required

Extracts up to 95% of used oil from the filter

“It’s a crushing machine!”Kevin Adamson • Used Parts Manager

4 State Trucks • Joplin, Missouri

QP-160Truck ModelCrushes filtersup to 16’ tall

QP-50Automotive Model

Crushes filtersup to 9” tall


SPECIFICATIONS QP-50 QP-160Overall Height 691/2” 851/2”Overall Width 15” 201/2”Overall Depth 163/4” 163/4”Shipping Weight 242 lbs 282 lbs

CRUSHING CHAMBERHeight 9” 161/4”Width 8” 10”Depth 8” 8”Air Inlet 1/4 Female npt 1/4 Female nptAir Pressure 100 to 160 PSI 100 to 200 PSICatch Basin Connection 3/4 Female npt 3/4 Female npt

STAND DIMENSIONSOverall Width 29” 29”Overall Depth 23” 27”Overall Height 57” 61”

CRUSHING FORCE BY AIR PRESSURECrushing Force Air Pressure Required12,000 lbs/6 tons 112 PSI14,000 lbs/7 tons 129 PSI16,000 lbs/8 tons 147 PSI18,000 lbs/9 tons 165 PSI20,000 lbs/10 tons 183 PSI22,000 lbs/11 tons 200 PSI


FLUID HANDLERSPORTABLE AIR POWERED

Both Models Feature:• 3 swivel casters to provide easy portability

• Welded body construction

• Air pressurized system, no pump to wear out, uses shop air

• Factory set air regulator and “pop-off” valve

• Low profile design of 9”

Controlled fluidflow valve

Manual valve creates an air tight seal to evacuate the fluid

Shown with optional height adapter

AH-15Anti-Freeze Handler™

OH-15Oil Handler™

29800.821.7320 • 816.233.7251 fax

SPECIFICATIONS OH-15 & AH-15Capacity 15 gallonsOverall Height 9”Overall Diameter 30”Catch Pan Diameter 24”Catch Pan Depth 27/16”Drain Hose Length 120”Drain Hose Diameter 3/4” (I.D.)Drain Shut-Off 3/4”Swivel Caster Diameter 3”Regulator 12 PSIPop Off Valve 15 PSIWeight 90 lbs


without notice.

FORKLIFT JACKSHEAVY DUTY

• Low Starting Height of 21/4”

• The industry leader for nearly 40 years!

Hold-to-Run™ Release Knob provides slower descent rate with precise operator control

Two-Position Lift Pad easily adjusts to handle flat or edged surfaces

Use with Model 7-TF Vehicle Support Stands (see page 14)

Air/Hydraulic Powered Models Now Available

Forklift using WPLSand Forklift Adaptors

FLJ-7707 Metric Ton Capacity

FLJ-4004 Ton Capacity


SPECIFICATIONS FLJ-400C FLJ-400 A/H FLJ-770B FLJ-770 A/HCapacity 8,000 lbs 8,000 lbs 15,442 lbs 15,442 lbsMaximum Lift Height 16” 16” 16” 16”Power Hydraulic Air/Hydraulic Hydraulic Air/HydraulicRequired Air Pressure N/A 155 PSI N/A 155 PSIReach (Raised Position) 7” 7” 7” 7”(Distance from Hydraulic Cylinder to Lift Pad)Width 8” 8” 10” 10”Starting Pad Height (Lift Arm Notch) 2 1/4” 2 1/4” 2 1/4” 2 1/4”Starting Pad Height (Serrated Lift Pad) 2 1/2” 2 1/2” 2 1/2” 2 1/2”Shipping Weight 68 lbs 71 lbs 93 lbs 98 lbs


TWO / FOUR POST LIFTSHEAVY DUTY QUICKLIFT®

QL-11011,000 lb. CapacityAsymmetric Design

Certified by UL Laboratories to meet ANSI/ALI-ALCTV-2006

• Great for Preventative Maintenance

• Surface Mounted No Excavating Required!

• Other Models Available. Call for details!

ROLLING BRIDGEJACKS AVAILABLE

Single point, pneumatic locking mechanism & simultaneous lock

release from one location

QL-300A QUICKLIFT®

30,000 lb. Capacity 68” Maximum Lift Height

800.821.7320 • 816.233.7251 fax 31

SPECIFICATIONS QL-1500A QL-110Capacity 15,000 lbs 11,000 lbsMaximum Lift Height 73 3/4” 73 3/4”Overall Height 14’ 6” 11’ 9 1/2”Shut Off Height 13’ 11” 11’ 3”Overall Width 153 1/2” 138 1/2”Inside Column Width 10’ 6” 9’ 7”Drive Thru Width 9’ 5 1/4” 8’Reach (Front Arm Max.) 62” 45 1/8”Reach (Rear Arm Max.) 62” 62”Minimum Pad Height 4 3/4” 4 3/4”Motor 2 HP 2HPVoltage, Single Phase 208V-230V 208V-230VAmps 30 Amps 30 AmpsSpeed of Rise 80 Seconds 50 SecondsCeiling Height Required 14’ 8” 12’ 1 1/2”First Locking Height 16 1/2” 16 1/2”Last Locking Height 72 1/2” 72 1/2”Locking Increments 4” 4”Bay Width 165 1/2” 150 1/2”Dist. In Front of Lift 10’ 8’Dist. In Rear of Lift 15’ 12’


SPECIFICATIONS QL-300Capacity 30,000 lbsMaximum Wheel Base 290”Maximum Lift Height 68”Overall Length 29’ 7 1/2”Overall Width 12’ 5 1/2”Overall Height 92”Inside Columns 132 1/2”Between Columns 293 3/4”Runway Width 24”Runway Height 9”Width Between Runways 54” - 75”Motor 5 HPVoltage 208-230 VoltsSpeed of Rise 105 SecondsAmps 30 AmpsMinimum Bay Size 15’ 6” x 35’


without notice.

©Gray Manufacturing Company, Inc. • Printed in USA (June 2011)Specifications subject to change without notice.



BUY FACTORY DIRECT

GRAYUSA.COM800.821.7320 • 816.233.7251 faxGRAY MANUFACTURING • 3501 S. Leonard Rd. • St. Joseph, MO 64503

GRAY MISSION STATEMENT:To des ign, manufacture, se l l and service with pride innovative, h i g h q u a l i t y a n d r e l i a b l e professional service equipment for the automotive, truck and service vehicle industries.

CORPORATE VALUE STATEMENTS:• Exist to serve our customer

• Pride in our USA manufacturing, workmanship and ingenuity

• Family owned, operated and oriented work environment

• Encourage and provide an environment, which fosters trust, teamwork and personal growth

• Involvement and leadership within our community

Date post:	15-May-2018
Category:	Documents
Upload:	trankiet
View:	221 times
Download:	2 times

PRODUCT CATALOG - Bremcobremco.co.uk/wp-content/uploads/2015/09/GRAY-CATO.pdf · innovative...

Documents