1Product Catalogue 2017
Edition 1
OUR REPUTATION IS BUILT ON OUR QUALITY
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 2
Welcome to the range.
A comprehensive LED lighting and LED driver range to better enable our customers to identify and assist their users in locating the best solution.
We design and manufacture unique LED lighting products of a high quality; bringing several advantages to lighting applications including energy savings, reduced maintenance and an overall reduction in the cost of ownership when compared with more traditional incandescent and halogen bulbs.
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors. Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 2
3
Contents
What’s New 4-5
LED Light Bars 6-11
LED Flexible Strip 12-24
LED Tubes 26-27
LED Power & Control 28-65
Commercial LED Lighting 66-79
Industrial LED Lighting 80-91
Outdoor LED Lighting 92-104
Lighting Accessories 106-123
General Information 124-126
Product Catalogue 2017 Edition 1 4
WHAT’S NEW!Our 2017 Edition 1 PowerLed catalogue introduces a collection of new innovative products to enhance our extensive range in LED Power and Lighting.
Slimline, 450mm, 5W AC input LED Lightstick suitable for cabinet and display lighting in a variety of applications. Can be easily connected up to 10M with its range of accessories. Available in 2700 ~ 2900K (Warm White) & 6000~6500K (Cool White).
Designed for architectural bespoke lighting, LINEO IP67, 10M, 50W, Kit provides a continuous seamless bright light with the capability of bending to a tight 12cm diameter. Available in 5700K (Cool White) and 2700K (Warm White). Perfect for interior and exterior accent or feature LED lighting.
Ideal for outdoor environments this 40W wall pack light offers 3400 lumens with an IP65 rating. Designed with a robust die cast aluminium and ABS plastic case with an opal diffuser.
Designed for wet areas and high moisture applications, our new range of ICON connection boxes and cable joiners allow for safe and reliable termination for both power and control cables in high moisture environments.
Offering up to 4000 lumens and a 120° beam angle the TYRO is an ideal luminaire for both commercial and industrial installations. This LED Batten is energy saving, efficient and is available in several sizes.
AC LIGHTSTICK
PAGE 10
PAGE 20
PAGE 114
PAGE 101
PAGE 88
ICON Waterproof Connectors
control cables in high moisture environments.
GENESIS3L
LINEO IP67 10M Kit
BERM LED Wall Pack
www.powerled.uk.com 0118 9408703
PAGE 88
TYRO LED Slim Batten
Offering up to 22980 Lumens, a 5 year warranty, and our ultra efficient LED driver technology; this new IP65 family of GENESIS3L linear highbays come with aluminium housing and a choice of an emergency option. The GENESIS3L of 80 ~ 200W are ideal for commercial and industrial installations.
PAGE 86
5
REVO IP is a quality IP65 and IK08 rated vapour proof luminaire with Lumen packages up to 10800Lm. Quick, efficient installation of these stylish luminaires is possible by using our fast fix brackets.
A range of IP54 rated LED LOWBAYs offering up to 20,000 lumens of light which can make them suitable for installation in warehouse and commercial buildings with up to 12 metre ceilings. Our range of LOWBAY luminaires can also be configured for day light harvesting and DALI control.
Our new IP65 floodlight the BLADE offers several outputs of 150W ~ 300W and a lumen range of 16000lm ~ 32200lm to suit many applications. Suitable for outdoor lighting.
A complete range of aluminium profiles to complement our extensive selection of LED flexible Strip.
PAGE 81
PAGE 90
PAGE 100
BLADE LED Floodlight
LOWBAY High Lumen High Lumen
LED Flexible Strip Extrusions
A complete range of aluminium profiles to complement our extensive selection of LED flexible Strip.
LED Flexible Strip Extrusions
PAGE 121
IP is a quality IP65 and IK08 rated vapour proof luminaire with Lumen packages up to 10800Lm. Quick, efficient installation of these stylish luminaires is possible by using our fast fix brackets.
PAGE 90
REVO-IP LED Light Batten
Our new IP65 floodlight the offers several outputs of
300W and a lumen 32200lm
Suitable for outdoor lighting.
LED Floodlight
Product Catalogue 2017 Edition 1 6
We offer a range of both AC and DC powered LED light bars which are suitable for cabinet, display and accent lighting. These versatile units offer quick, flexible and easy connections and a balanced light output across each fitting.
We offer a range of both AC and DC powered LED CONNECT
AC LIGHTSTICK
LED Light Bars
www.powerled.uk.com 0118 9408703
7
CONNECT LED LIGHT BAR SPECIFICATION
Part Code CON210 CON210W CON310 CON310W CON510 CON510WLumen Output 280lm 225lm 420lm 350lm 620lm 520lmInput Voltage 24VDC 24VDC 24VDC 24VDC 24VDC 24VDCCurrent 125mA 125mA 200mA 200mA 350mA 350mAPower 3W 3W 4.8W 4.8W 8.4W 8.4WPower Consumption 3.2W 3.2W 5W 5W 9W 9WLED Type 3528 3528 3528 3528 3528 3528 LED Qty 30 30 48 48 84 84Light Length 200mm 200mm 300mm 300mm 500mm 500mmWeight 62g 62g 94g 94g 155g 155gBeam Angle 120° 120° 120° 120° 120° 120°IP IP44 IP44 IP44 IP44 IP44 IP44CCT 5600 - 7000K 2800 - 3200K 5600 - 7000K 2800 - 3200K 5600 - 7000K 2800 - 3200KDimensions 223.6 x 30 x 12.3mm 323.6 x 30 x 12.3mm 523.6 x 30 x 12.3mm
12.3mm
223.6mm
205.6mm
323.6mm
305.6mm
523.6mm
505.6mm
CON510
CON310
CON210
Connect Mechanical
Product Features• Slimline bar suitable for cabinet lighting, display and accent lighting etc.
• Easy installation, multiple configurations
• Simple and safe low voltage on/off control
• Reverse polarity protected
• Simple link up capability, allowing up to 4 metres of lighting from 1 driver
• Rugged aluminium extrusion with easy fit mounting points
• Suitable for 24VDC vehicle applications
• Constant power technology, ensures balanced light output across each fitting
CONNECT LED Light Bar
RATED
IP449 WATTS5 WATTS3 WATTS BEAM ANGLE
120° BEAM30
LEDS PER/M
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 8
CONNECT CONNECTIONS
Part Code F90 F180 S180 PS1 SW1 CLC-1 CON-PIRStyle Corner Straight Cable Cable Switch Connector Cable PIR SensorMax Current 3A 3A 3A 3A 3A 3A 5AAngle 90° Flexible Flexible Flexible Weight 17g 6g 7g Dimensions 80mm 500mm 1500mm
All connector dimensions are 3.5∅mm O/D x 1.35∅mm I/D x 11mm long
30mm
12m
m
2-DC 3.5 x 1.35mm
4.6
12.3
11m
m
24mm
12.3
16mm
24m
m
37.5mm
30m
m
12.3
34m
m
30m
m
49mm
500mm
155mm
1562mm
10
+-
30m
m
30m
m
45mm
65mm
30mm
12m
m
2-DC 3.5 x 1.35mm
4.6
12.3
11m
m
24mm
12.3
16mm
24m
m
37.5mm
30m
m
12.3
34m
m
30m
m
49mm
500mm
155mm
1562mm
10
+-
30m
m
30m
m
45mm
65mm
30mm
12m
m
2-DC 3.5 x 1.35mm
4.6
12.3
11m
m
24mm
12.3
16mm
24m
m
37.5mm
30m
m
12.3
34m
m
30m
m
49mm
500mm
155mm
1562mm
10
+-
30m
m
30m
m
45mm
65mm
30mm
12m
m
2-DC 3.5 x 1.35mm
4.6
12.3
11m
m
24mm
12.3
16mm
24m
m
37.5mm
30m
m
12.3
34m
m
30m
m
49mm
500mm
155mm
1562mm
10
+-
30m
m
30m
m
45mm
65mm
SW1 CON-PIR
F90 F180F90
Connectors
F180
-/+180 120
90
60
30-30
-60
-90
-120
0
100
200
300
293.2cm
586.4cm
879.6cm
1172.8cm
1m
2m
3m
4m
48.48lx
12.12lx
5.39lx
3.03lx
-/+180 120
90
60
30-30
-60
-90
-120
0
100
200
300
293.2cm
586.4cm
879.6cm
1172.8cm
1m
2m
3m
4m
48.48lx
12.12lx
5.39lx
3.03lx
30mm12
mm
2-DC 3.5 x 1.35mm
4.6
12.3
11m
m
24mm
12.3
16mm
24m
m
37.5mm
30m
m
12.3
34m
m
30m
m
49mm
500mm
155mm
1562mm
10
+-
30m
m
30m
m
45mm
65mm
Connect Connections
SUGGESTED LED DRIVERSMaximum single run 4 metres when using standard PS1 input cable and F180 connections.
CLC-1 Extender cable Connector
The CLC-1 extender cable can easily be connected to either extend between LED light bars or even for input cable use. Simply use between 2 x S180 cables or a combination of a S180 cable and a PS1 input cable.
Part Code PSU001 PSU002 PSU003 PSU004 Metres Powered 1.2mtr 2.1mtr 3mtr 4mtr
PS1 CLC-1S180
Connect Luminance Distribution
9
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 10
Part Code LS450W LS450C Lumen Output 320lm 450lmInput Voltage 100~240V 100~240VPower 5W 5WLED Qty 24 24CCT 2700~2900K 6000~6500K Dimensions 450 x 30 x 25mm 450 x 30 x 25mm
Quick & easy connections
AC LIGHTSTICK LED LIGHT BAR SPECIFICATION RATED
IP41
Product Features• Easy connection and installation
• Available in 2700~2900K and 6000~6500K
• Aluminium anodised case
• 30,000 hours life
• Install at 45° or 90° angles using included mounting clips
• 2 years warranty
• Seamless Connecting
5 WATTS
BEAM24
LEDS PER/M
25m
m30
mm
450mm
AC LIGHTSTICK LED Light Bar
Our slimline AC input LED lightstick is suitable for cabinet and display lighting; easily connected in series up to10 metres.
AC Lightstick Mechanical
AC LIGHTSTICK ACCESSORIES
IP41Protected from granular foreignbodies >1mm.Protected against vertically dripping water.
IP RATINGS EXPLAINED
Included Accessories:2 x 90° Plastic mounting clips2 x 45° Plastic mounting clips10 x screws
Part Code LSAC1.5M LSC150MM LSC1M LSSWStyle 1.5M AC Input Cable Short Interconnect Cable Long Interconnect Cable Input SwitchDimensions 1500mm 150mm 1000mm -
LSAC1.5M LSC150MM LSC1M
Mounting Clips
90°
Mounting Clips
90°45°
LSSW
11
RATED
IP41
Product Features• Easy connection and installation
• Available in 2700~2900K and 6000~6500K
• Aluminium anodised case
• 30,000 hours life
• Install at 45° or 90° angles using included mounting clips
• 2 years warranty
• Seamless Connecting
Connect Connections
-/+180 120
90
60
30-30
-60
-90
-120
0
60
30
120
90
150
541.49cm
1082.97cm
1624.46cm
2165.94cm
2m
4m
6m
8m
8.837, 27.711lx2.209, 6.928lx
0.9819, 3.079lx
0.5523, 1.732lx
2707.43cm10m 0.3535, 1.1081lx
-/+180 120
90
60
30-30
-60
-90
-120
0
60
30
120
90
150
548.57cm
1097.13cm
1645.70cm
2194.27cm
2m
4m
6m
8m
8.626, 26.90lx2.157, 6.726lx
0.9584, 2.989lx
0.5391, 1.681lx
2742.83cm10m 0.3450, 1.076lx
-/+180 120
90
60
30-30
-60
-90
-120
0
60
30
120
90
150
541.49cm
1082.97cm
1624.46cm
2165.94cm
2m
4m
6m
8m
8.837, 27.711lx2.209, 6.928lx
0.9819, 3.079lx
0.5523, 1.732lx
2707.43cm10m 0.3535, 1.1081lx
-/+180 120
90
60
30-30
-60
-90
-120
0
60
30
120
90
150
548.57cm
1097.13cm
1645.70cm
2194.27cm
2m
4m
6m
8m
8.626, 26.90lx2.157, 6.726lx
0.9584, 2.989lx
0.5391, 1.681lx
2742.83cm10m 0.3450, 1.076lx
AC Lightstick 2700 Luminance Distribution
AC Lightstick 6000 Luminance Distribution
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 12
LED Flexible StripLow power, high output
Our LED Flexible Strip offering has been developed to provide options in light colour and intensity, as well as ingress protection, to make suitable for a wide array of installations. Built using precise LED binning and supplied in cuttable reels these strips are a flexible and reliable solution to many lighting needs.
LED Flexible Strip
pic
LED Flexible Strip
LED Flexible Strip
pic
ECO
ACCENT
NAUTILUS
LINEO LINE 10M Kit
DIGITAL RGB Strip
Product Catalogue 2017 Edition 1 12 www.powerled.uk.com 0118 9408703
13
LED FLEXIBLE STRIP - ECO - 30 LEDS PER METRE
Features• Energy Saving • Compact Strip with SMD LED technology• IP20 Rated • Available in Cool White, Warm White and Super Warm White • High Reliability & Efficiency • 30 LEDs per metre • Cuttable every 100mm• 120° beam angle
LED Flexible Strip - ECO 5m Flexible LED Strip
Part Code F0-11-35-1-30-F8-20 D0-11-35-1-30-F8-20 B5-11-35-1-30-F8-20Lumen Output 190lm 160lm 140lmInput Voltage 12Vdc 12Vdc 12VdcPower per metre 2.4W 2.4W 2.4WCuttable Length 100mm 100mm 100mmLED Qty 30 per mtr 30 per mtr 30 per mtrBeam Angle 120° 120° 120°IP IP20 IP20 IP20CCT 5900 - 6100K 3900 - 4100K 2400 - 2600K Width Dimensions 8mm 8mm 8mm
CuttingPoint
100mm
5M - Also available in other lengths
8mm
CuttingPoint
Designed in England
RoHS
++
--++
--+
-+
-
2.2mm
30 LEDs Per Metre Mechanical
RATED
IP20100MM2.4 WATTS/M BEAM ANGLE
120° BEAM30
LEDS PER/M
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 14
Features• Energy Saving • Compact Strip with SMD LED technology• IP20 Rated • Driver included - PCV1212• Available in Cool White, Warm White and Super Warm White • High Reliability & Efficiency • 30 LEDs per metre • Cuttable every 100mm• 120° beam angle
LED Flexible Strip - ECO 2m Flexible LED Strip Light Kit
Part Code ECO2MPC ECO2MPW ECO2MPS Lumen Output 190lm 160lm 140lmInput Voltage 12Vdc 12Vdc 12VdcPower per metre 2.4W 2.4W 2.4WCuttable Length 100mm 100mm 100mmLED Qty 30 per mtr 30 per mtr 30 per mtrBeam Angle 120° 120° 120°IP IP20 IP20 IP20CCT 5900 ~ 6100K 3900 ~ 4100K 2400 ~ 2600KCCT Nominal 6000K 4000K 2500K Width Dimensions 8mm 8mm 8mm
ECO 2M FLEXIBLE LED STRIP LIGHT KIT
Part Code PCV1212Input Voltage 220V ~ 240VACInput Frequency 47/63 Hz Power Factor 0.80Power 12WVoltage 12VdcCurrent Range 0 ~ 1.0AEfficiency 80%Connections Screw terminal on I/P & O/PWeight 0.06gDimensions 98 x 39 x 22mm
PCV1212 DRIVER
CuttingPoint
100mm
5M - Also available in other lengths
8mm
CuttingPoint
Designed in England
RoHS
++
--++
--+
-+
-
2.2mm
30 LEDs Per Metre Mechanical
RATED
RATED
IP20
IP20
2.4 WATTS/M 100MMBEAM ANGLE
120° BEAM30
LEDS PER/M
15
Features• Our IP65 option is encapsulated in a UV stable polyurethane coating, ensuring that it will not discolour over time as well as providing a scratch resistant finish, for a longer life.
• Epistar LEDs
• 10mm PCB for excellent heat management
• 50,000 hours working life
• Precise LED binning enables consistent colour temperature from batch to batch
• Easy installation
• Multiple applications for commercial and residential environments
• High grade 3M VHB ultra adhesive backing Strip
• T.C point for accurate thermal management
Our standard range of LED Flexible Tape, at 60 LEDs per metre (30 LEDs for Low Power RGB), ACCENT is available in 5 metre reels of low and high power variants. Ingress protection levels of IP20 or IP65 are available in colours of cool white, warm white, RGB, red, green & blue.
LED Flexible Strip - ACCENT
WHITE LED FLEXIBLE STRIP - ACCENT - LOW POWER
Part Code F10-C3528-12-60 F10-W3528-12-60Lumen Output 380lm 320lmInput Voltage 12Vdc 12VdcPower per metre 4.8W 4.8W Cuttable Length 50mm 50mmLED Qty 60 per mtr 60 per mtrBeam Angle 120° 120°IP IP20/65 IP20/65CCT 6000K 3000KWidth Dimensions 10mm 10mm
LED Flexible Strip IP rating part codesie: F10-W3528-12-60-20 ~ IP20 F10-W3528-12-60-65 ~ IP65
CuttingPoint
50mm
5M Also available in other lengths
10mm
CuttingPoint
++
--
Designed in England ++
- -
2.2mm
RoHS
+
-+
-
~
60 LEDs Per Metre Mechanical
RATED
IP65RATED
IP204.8 WATTS/M 50MMBEAM ANGLE
120° BEAM60
LEDS PER/M
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 16
WHITE LED FLEXIBLE STRIP - ACCENT - HIGH POWER
CuttingPoint
100mm
5M Also available in other lengths
10mm
CuttingPoint
++
--
Designed in England ++
- -
2.2mm
RoHS
+
-+
-
~
60 LEDs Per Metre Mechanical
Part Code F10-C5050-24-60 F10-W5050-24-60Lumen Output 1200lm 1100lmInput Voltage 24Vdc 24VdcPower per metre 14.4W 14.4W Cuttable Length 100mm 100mmLED Qty 60 per mtr 60 per mtrBeam Angle 120° 120°IP IP20/65 IP20/65CCT 6000K 3000KWidth Dimensions 10mm 10mm
IP20 rated ~ No protection from water.
IP65 rated ~ Limited ingress of dust, not in sufficient quantity to interfere with operation. Not designed for immersion or sitting in water. Protected from water projected from a nozzle against the enclo sure from any direction. Any product used outside and exposed to potential repeated water ingress should be IP67 rated for ongoing protection.
LED Flexible Strip IP rating part codes
ie: F10-W5050-24-60-20 ~ IP20 F10-W5050-24-60-65 ~ IP65
IP RATINGS EXPLAINED
RATED
IP65
RATED
IP65
RATED
IP65
RATED
RATED
RATED
IP20
IP20
IP20COLOUR LED FLEXIBLE STRIP - ACCENT - LOW POWER
Part Code F10-R3528-12-60 F10-G3528-12-60 F10-B3528-12-60Lumen Output 90lm 180lm 60lmInput Voltage 12Vdc 12Vdc 12VdcPower per metre 4.8W 4.8W 4.8WCuttable Length 50mm 50mm 50mmWave Length 620nm 520nm 470nmLED Qty 60 per mtr 60 per mtr 60 per mtrBeam Angle 120° 120° 120°IP IP20/65 IP20/65 IP20/65Colour Red Green Blue Width Dimensions 10mm 10mm 10mm
LED Flexible Strip IP rating part codes
ie: F10-R3528-12-60-20 ~ IP20 F10-R3528-12-60-65 ~ IP65
CuttingPoint
50mm
5M Also available in other lengths
10mm
CuttingPoint
++
--
Designed in England ++
- -
2.2mm
RoHS
+
-+
-
~
60 LEDs Per Metre Mechanical
14.4 WATTS/M
4.8 WATTS/M 50MMBEAM ANGLE
120° BEAM60
LEDS PER/M
100MMBEAM ANGLE
120° BEAM60
LEDS PER/M
Part Code F10-RGB5050-12-30Lumen Output 250lmInput Voltage 12VdcPower per metre 7.2W Cuttable Length 100mmLED Qty 30 per mtrBeam Angle 120°IP IP20/IP65Colour RGB Width Dimensions 10mm
RGB LED FLEXIBLE STRIP - ACCENT - LOW POWER
CuttingPoint
100mm
5M Also available in other lengths
10mm
CuttingPoint
Designed in England
2.2mm
RoHS
R
B
G
R
B
G
R
B
G
~
30 LEDs Per Metre Mechanical
RGB LED FLEXIBLE STRIP - ACCENT - HIGH POWER
CuttingPoint
100mm
5M Also available in other lengths
10mm
CuttingPoint
Designed in England
2.2mm
RoHS
R
B
G
R
B
G
R
B
G
~
60 LEDs Per Metre Mechanical
Power Repeaters, Colour Controllers and Drivers information can be found from page 53.
Part Code F10-RGB5050-24-60Lumen Output 500lmInput Voltage 24VdcPower per metre 14.4W Cuttable Length 100mmLED Qty 60 per mtrBeam Angle 120°IP IP20/IP65Colour RGB Width Dimensions 10mm
LED Flexible Strip IP rating part codes
ie: F10-RGB5050-24-60-20 ~ IP20 F10-RGB5050-24-60-65 ~ IP65
17
LED Flexible Strip IP rating part codes
ie: F10-RGB5050-12-30-20 ~ IP20 F10-RGB5050-12-30-65 ~ IP65
RATED
IP65RATED
IP20
RATED
IP65RATED
IP207.2 WATTS/M
14.4 WATTS/M
100MMBEAM ANGLE
120° BEAM30
LEDS PER/M
100MMBEAM ANGLE
120° BEAM60
LEDS PER/M
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 18
LED Flexible Strip - NAUTILUS
The ultra Slimline NAUTILUS range is ideally suited to accent and back lighting, the RGB version is perfect for coloured lighting projects.
OEMSPECIAL ORDER PRODUCT
** Black and Clear finishes are available as a special order.
• Custom lengths built to customer specification ready for installation
• Consistent illumination along the entire length with no colour variation.
• UV resistant and flame retardant PVC materials
• High illumination
• Very flexible - White: 3cm bending diameter - RGB: 5cm bending diameter
• Automated production, high reliability & long warranty
• Commercial IP Rated Connectors
• External applications where IP67 is required • Long Life
Features
19
Part Code NTS-IP67-5700K-W NTS-IP67-2700K-WLumen Output 900lm 900lmInput Voltage 24Vdc 24VdcPower per metre 12W 12WCuttable Length 100mm 100mmLED Qty 60 per mtr 60 per mtrBeam Angle 150° 150°IP IP67 IP67PCB Fitting Colour White WhiteCCT 5700K 2700KWidth Dimensions 13.5mm Tape / 18mm Connector 13.5mm Tape / 18mm Connector
WHITE LED FLEXIBLE STRIP - NAUTILUS - WHITE
Part Code NTS-IP67-RGB RGB Red RGB Green RGB BlueLumen Output 75lm 185lm 40lm Input Voltage 24Vdc 24Vdc 24VdcPower per metre 4W 4W 4WCuttable Length 100mm 100mm 100mmLED Qty 60 per mtr 60 per mtr 60 per mtrBeam Angle 150° 150° 150°IP IP67 IP67 IP67Colour Red Green BluePCB Fitting Colour White White White Wave Length 620 ~ 630nm 520 ~ 530nm 460 ~ 470nmWidth Dimensions 15.5mm Tape / 20mm Connector 15.5mm Tape / 20mm Connector 15.5mm Tape / 20mm Connector
RGB LED FLEXIBLE STRIP - NAUTILUS - RGB
100mm
CuttingPoint
W
10.5mm
Bespoke lengths up to 10M
CuttingPoint
60 LEDs Per Metre Mechanical
Input Connection Middle Connector End Cap Joining Connector
Well designed, high quality connectors are used to enhance your bespoke architectural lighting project.
White Clear** Black**
Innovative connectors
3300K, 3500K, 4000K, 5000K & 6500Kavailable on request.
RATED
IP67
RATED
IP674 WATTS/M
12 WATTS/M 100MMBEAM ANGLE
150° BEAM60
LEDS PER/M
100MMBEAM ANGLE
150° BEAM60
LEDS PER/M
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 20
LINEO LINE 10M KIT
LINEO LINE 10M Kit Mechanical
Part Code LIN-5700-IP67-KIT LIN-2700-IP67-KITLumen Output 110lm 110lmInput Voltage 24Vdc 24VdcPower per metre 4.5W 4.5WCuttable length 83.3mm 83.3mmLED Qty 72 per mtr 72 per mtrIP IP67 IP67Beam Angle 160° 160°CCT 5700K 2700KDimensions 18 x 9mm 18 x 9mm
9mm
18mm
10M 300mm
Top elevation
Side elevation
9mm
18mm
Features• Built ready for installation
• Seamless bright light with new design of connectors
• Flat profile for crisp feature light interior design
• Continuous length of 10 metres
LED Flexible Strip - LINEO LINE 10M Kit
Designed for architectural bespoke lighting, LINEO IP67, 10M, 45W, Kit provides a continuous seamless bright light with the capability of bending to a tight 9cm diameter. Perfect for your interior feature LED lighting.
RATED
IP674.5 WATTS/M 83.3MMBEAM ANGLE
160° BEAM72
LEDS PER/M
21
• Bespoke LED strips
• Custom lengths and IP ratings
• Connectors, Extrusions and Diffusers
• Thermal management and testing
Professional products and bespoke design services
Commercial grade LED Strip
Our extensive range of LED Flexible Strip can be incorporated into bespoke and custom LED lighting solutions suited to your individual requirements. Whatever colour, size or type of light fitting you require; we can work with you to deliver the solution you wish to accomplish.
Our sales team can discuss with you your LED lighting project giving you advice, design ideas and technical solutions to see your project through to fruition.
LED lighting solutions are
designed and planned to your
requirements.
Call our Lighting Technical Support Team to discuss your project requirements on 0118 9408703
• Bespoke LED strips
• Custom lengt
• Connectors, Extr
• Thermal
Commercial grade LED Strip
21
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 22
Features• Optional high grade 3M adhesive backing for easy installation standard on IP20 Strip
• Available in IP20, IP65 & IP67 ratings
• 50,000 hours working life
• Multiple applications for commercial and residential environments
• Precise LED binning enables consistent colour temperature from batch to batch
A new innovative range of RGB-W and digital RGB Flexible Strip that will bring a colourful feature to any room. Suitable for connection to one of our RF digital controllers.
LED Flexible Strip - RGB-W and Digital RGB Strip
23
LED FLEXIBLE STRIP - RGBD
Part Code F10-RGBD-12-48Voltage 12VDCPower Consumption 11.2W per mtrLED Qty 48 per mtrAddressing Range 3 LEDs AddressableMaximum Cascading Length 50MColour RGBIP IP20/65/67IP Finish IP67 ~ glue filled / IP65 ~ Polyurethane coatingBack Adhesive VHB 3M adhesive Tape on IP20 as standardWorking Temperature -30°C ~ +70°CDimensions 5000 x 15.4 x 6.3mm
170mm
180mm180mm
15.4
mm
6.3m
m
5M
Dynamic Mode 99 modesDynamic Speed Levels 10 levelsStatic Colour 29 ColoursStatic Colour Brightness 10 Levels
FUNCTIONS LED DIMMER UNIT
Power Connection 5.5mm DC female jackStrip Connection 4-Pin SM type connector on both ends
LED Flexible Strip IP rating part codesie: F10-RGBD-12-48-20 ~ IP20 F10-RGBD-12-48-65 ~ IP65 F10-RGBD-12-48-67 ~ IP67
LED Flexible Strip - Digital RGBD Strip
RATED
IP65RATED
IP67RATED
IP20
Digital RGB LED Flexible Strip Mechanical
11.2 WATTS/M
BEAM48
LEDS PER/M
Features• Dynamic colour chasing modes
• Cascading connectors
• High quality UV stable polyurethane coating enables non discolouration and is scratch resistant for longer life
• High grade thick 3M adhesive backing for easy installation
• 50,000 hours working life
• Multiple applications for commercial and residential environments
• Precise LED binning section enables 100% consistent colour temperature from batch to batch
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 24
LED Flexible Strip - RGB-W Strip
LED FLEXIBLE STRIP - RGB-W
Part Code F10-RGBW-12-60Voltage 12VDCPower Consumption 9.6W per mtrLED Qty 30 per mtr (30 x RGB & 30 x white)Cut Points 100mmPCB Width 15mm (end) 13mm (narrowest point)White & RGB Colour mixing Parallel in lineIP IP20/65/67IP Finish IP67 ~ glue filled / IP65 ~ Polyurethane coatingFPC Material 35um rolled copper fpcBack Adhesive VHB 3M adhesive Tape on IP20 as standardWorking Temperature -30°C ~ +70°CStrip Connector 5-Pin SM type connector on both ends ~ Simple trouble free connectionDimensions 5000 x 15 x 6.3mm
5M
100mm 115mm
15mm
13mm (narrowest point)
BB
6.3mm
GGRR
WW+12V+12V
BB
GGRR
WW+12V+12V
CuttingPoint
CuttingPoint
RGB-W 30 LEDs Per Metre Mechanical
LED Flexible Strip IP rating part codesie: F10-RGB-W-12-60-20 ~ IP20 F10-RGB-W-12-60-65 ~ IP65 F10-RGB-W-12-60-67 ~ IP67
RATED
IP67RATED
IP65RATED
IP209.6 WATTS/M
BEAM30
LEDS PER/M
Features• Even LED RGB colour and white lighting
• Glue filled silicon tube for IP67 version
• Optional high grade thick VHB 3M adhesive backing tape can be supplied
• 30 LEDs per mtr (30 x RGB & 30 x white)
• Available in IP20, IP65 & IP67 ratings
• 50,000 hours working life
• Multiple applications for commercial and residential environments
• Precise LED binning enables 100% consistent colour temperature from batch to batch
25
Point of sale products• Dump bins
• Free standing display units
• Banners, posters, leaflets and brochures
• Wall mount displays
• Counter top folders
Several of our most popular product ranges are available to purchase via eye catching in-store point of sale displays. Look out for these displays at your local wholesaler to assist with your purchase.
In-store Point of Sale Merchandising
Ask us about our point of sale options.
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 26
Product Features• A comprehensive range of energy saving T8 TUBES in lengths of 2, 4 and 5 ft.
• High lumen output
• High CRI >85%
• Rotatable end-cap for easy positioning to gain optimum Lumen output
• Instant on with no flicker
• Energy consumption 50% lower than fluorescent lamps
• High reliability
• Extended warranty for approved applications
• Onboard LED Driver ensuring easy installation
LED Tubes - T8 TUBE
Our range of LED T8 replacement LED tubes are energy efficient with long lifetime and low maintenance, they offer excellent colour rendering and a high Lumen output throughout their lifetime.Available with opaque or clear lenses, in lengths of 2, 4 and 5 feet.
27
LED TUBES - T8 TUBE
LED TUBES - T8 TUBE
Part Code 2FTR10W30 2FTR10N40 2FTR10C65 4FTR20W30 4FTR20N40 4FTR20C65 Lumen Output 900lm 950lm 1000lm 1900lm 1950lm 2000lm Power 10W 10W 10W 20W 20W 20W Power Factor 0.95 0.95 0.95 0.95 0.95 0.95Fitting Colour White White White White White White Beam Angle 200° 200° 200° 200° 200° 200° IP IP20 IP20 IP20 IP20 IP20 IP20CRI >80% >80% >80% >80% >80% >80%CCT 3000K 4000K 6500K 3000K 4000K 6500KDimensions 588.5 x 27mm 588.5 x 27mm 588.5 x 27mm 1198 x 27mm 1198 x 27mm 1198 x 27mm
Part Code 5FTR25W30 5FTR25N40 5FTR25C65 Lumen Output 2400lm 2450lm 2500lmPower 25W 25W 25WPower Factor 0.95 0.95 0.95Fitting Colour White White White Beam Angle 200° 200° 200°IP IP20 IP20 IP20 CRI >80% >80% >80%CCT 3000K 4000K 6500KDimensions 1498 x 27mm 1498 x 27mm 1498 x 27mm
27mm ∅
27mm ∅
27mm ∅
1498mm
1198mm
588.5mm
T8 2ft
T8 4ft
T8 5ft
T8 TUBE Mechanical
T8 2ft
T8 4ft
T8 5ft
RATED
IP20
RATED
IP20
10 WATTS
25 WATTS
BEAM ANGLE
BEAM ANGLE
200°
200°
LED Power & ControlConstant Current & Constant VoltageYou have your LED lights, now you need the LED Drivers to power them!
PowerLed offer a range of LED power supplies, for both indoor and outdoor installations, to suit your requirements. LED drivers are power supplies, but with a difference; they offer some of the same features as a standard power supply, such as power factor correction, high efficiency, compact size and isolated or non-isolated design, but they have their own unique advantages too.
PowerLed’s LED drivers have been specifically designed for a wide range of LED applications. All our drivers are CE approved as well as meeting stringent safety certification as detailed by UK European and International safety agencies, offering a warranty of up to 5 years* ensures that the PowerLed range of drivers are a safe and reliable choice. (*driver model dependent).
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 28
CONSTANT VOLTAGE
CONSTANT CURRENT
IP RATED DRIVERS
DIMMING DRIVERS
LED CONTROLLERS
POWER REPEATERS
DIMMER KITS
LINEAR LED DRIVERS FOR DISPLAY
29
PCV12 SERIES - 12W LED DRIVERS
PCV20 SERIES - 20W LED DRIVERS
Part Code PCV1212Input Voltage 220 ~ 240VACInput Frequency 47/63Hz Power Factor 0.8Power 12WVoltage 12VdcCurrent Range 0 ~ 1.0AEfficiency 80%Connections Screw terminal on I/P & O/PWeight 60g Dimensions L 98 x W 39 x H 22mm
Part Code PCV1220 PCV2420Input Voltage 220 ~ 240VAC 220 ~ 240VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.8 0.8Power 20W 20WVoltage 12Vdc 24VdcCurrent Range 0 ~ 1.7A 0 ~ 0.83AEfficiency 82% 84% Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 100g 100gDimensions L 130 x W 44 x H 28mm L 130 x W 44 x H 28mm
LED Power & Control - Constant Voltage
W
L
HPCV12 12W Series Driver Mechanical
PCV20 Series 20W Driver Mechanical
H
L
W
RATED
IP20
RATED
IP20
12 WATTS
20 WATTS
Part Code PCV1250 PCV2450Input Voltage 100 ~ 240VAC 100 ~ 240VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 50W 48WVoltage 12Vdc 24VdcCurrent Range 0 ~ 4.2A 0 ~ 2AEfficiency 82% 84%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 300g 300gDimensions L 184 x W 61 x H 32mm L 184 x W 61 x H 32mm
Part Code PCV1236 PCV2436Input Voltage 100 ~ 240VAC 100 ~ 240VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 36W 36WVoltage 12Vdc 24VdcCurrent Range 0 ~ 3A 0 ~ 1.5AEfficiency 82% 84%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 130g 130gDimensions L 166 x W 52 x H 24mm L 166 x W 52 x H 24mm
PCV36 SERIES - 36W LED DRIVERS
PCV50 SERIES - 50W LED DRIVERS
L
WH
PCV36 & PCV50 Series 36W & 50W Drivers Mechanical
w terminal on I/P & O/P
84 x W 61 x H 32mm
RATED
IP20
RATED
IP20
Product Catalogue 2017 Edition 1 30 www.powerled.uk.com 0118 9408703
w terminal on I/P & O/P
36 WATTS
48 WATTS
31
L
WH
Part Code PCV1260 PCV2460Input Voltage 100 ~ 240VAC 100 ~ 240VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 60W 60WVoltage 12Vdc 24VdcCurrent Range 0 ~ 5A 0 ~ 2.5AEfficiency 87% 87%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 300g 300gDimensions L 158 x W 61 x H 36mm L 158 x W 61 x H 36mm
Part Code PCV2475Input Voltage 100 ~ 240VACInput Frequency 47/63HzPower Factor 0.95Power 75WVoltage 24VdcCurrent Range 0 ~ 3.15AEfficiency 85%Connections Screw terminal on I/P & O/PWeight 300gDimensions L 184 x W 61 x H 32mm
PCV60 SERIES - 60W LED DRIVERS
PCV75 SERIES - 75W LED DRIVERS
PCV60 Series 60W Driver Mechanical
PCV75 Series 75W Driver Mechanical
W
L
H
RATED
IP20
RATED
IP20ERP STAGE 2 INDICATOR
75 WATTS
60 WATTS LATCH OFF
Part Code PCV12100 PCV24100Input Voltage 100 ~ 240VAC 100 ~ 240VACInput Frequency 47/63Hz 47/63HzPower Factor 0.95 0.95Power 100W 100WVoltage 12Vdc 24VdcCurrent Range 0 ~ 8.33A 0 ~ 4.16AEfficiency 87% 87%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 400g 400gDimensions L 158 x W 61 x H 36mm L 158 x W 61 x H 36mm
Part Code PCV12150 PCV24150Input Voltage 100 ~ 240VAC 100 ~ 240VACInput Frequency 47/63Hz 47/63HzPower Factor 0.95 0.95Power 150W 150WVoltage 12Vdc 24VdcCurrent Range 0 ~ 12.5A 0 ~ 6.25AEfficiency 87% 87%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 750g 750gDimensions L 216 x W 74 x H 42mm L 216 x W 74 x H 42mm
PCV100 SERIES - 100W LED DRIVERS
PCV150 SERIES - 150W LED DRIVERS
PCV100 & PCV150 Series 100W & 150W Drivers Mechanical
W
L
H
RATED
IP20
RATED
IP20
LATCH OFF
LATCH OFF
ERP STAGE 2
ERP STAGE 2
32Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703
100 WATTS
150 WATTS
INDICATOR
INDICATOR
Part Code PCV1236E PCV2436EInput Voltage 100 ~ 240VAC 100 ~ 240VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 36W 36WVoltage 12Vdc 24VdcCurrent Range 0 ~ 3A 0 ~ 1.5AEfficiency 82% 84%Connections (input) 300mm UL SVT 3C 18AWG 300mm UL SVT 3C 18AWGConnections (output) 300mm UL SVT 2C 18AWG 300mm UL SVT 2C 18AWGWeight 480g 480gDimensions L 169 x W 55 x H 30mm L 169 x W 55 x H 30mm
Part Code PCV1275E PCV2475EInput Voltage 100 ~ 240VAC 100 ~ 240VACInput Frequency 47/63Hz 47/63Hz Power factor 0.95 0.95Power 75W 75WVoltage 12Vdc 24VdcCurrent Range 0 ~ 6.25A 0 ~ 3.15AEfficiency 85% 85%Connections (input) 300mm UL SVT 3C 18AWG 300mm UL SVT 3C 18AWGConnections (output) 300mm UL SVT 2C 18AWG 300mm UL SVT 2C 18AWGWeight 780g 780g Dimensions L 186 x W 64 x H 39mm L 186 x W 64 x H 39mm
PCV36E SERIES - 36W IP67 LED DRIVERS
PCV75E SERIES - 75W IP67 LED DRIVERS
L
WH
PCV36E & PCV75E Series 36W & 75W Drivers Mechanical
LED Power & Control - Constant Voltage IP67 Rated
RATED
IP67
RATED
IP67
33
75 WATTS
36 WATTS
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 34
Part Code PCV12100E PCV24100EInput Voltage 220 ~ 240VAC 220 ~ 240VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 100W 100WVoltage 12Vdc 24VdcCurrent Range 0 ~ 8.4A 0 ~ 4.2AEfficiency 90% 90%Connections (input) 300mm UL SVT 3C 18AWG 300mm UL SVT 3C 18AWGConnections (output) 300mm UL SVT 2C 18AWG 300mm UL SVT 2C 18AWGWeight 780g 780gDimensions L 191 x W 70 x H 40mm L 191 x W 70 x H 40mm
Part Code PCV12150E PCV24150EInput Voltage 100 ~ 240VAC 100 ~ 240VACInput Frequency 47/63Hz 47/63HzPower Factor 0.95 0.95Power 150W 150WVoltage 12Vdc 24VdcCurrent Range 0 ~ 12.5A 0 ~ 6.3AEfficiency 91% 93%Connections (input) 300mm UL SVT 3C 18AWG 300mm UL SVT 3C 18AWGConnections (output) 300mm UL 2517 2C 14AWG 300mm UL 2517 2C 14AWGWeight 1000g 1000g Dimensions L 223 x W 70 x H 40mm L 223 x W 70 x H 40mm
PCV100E SERIES - 100W IP67 LED DRIVERS
PCV150E SERIES - 150W IP67 LED DRIVERS
L
WH
PCV100E & PCV150E Series 100W & 150W Drivers Mechanical
RATED
IP67
RATED
IP67
100 WATTS
150 WATTS
35
L
WH
PCV100E & PCV150E Series 100W & 150W Drivers Mechanical
Part Code PCV12200E PCV24200EInput Voltage 220 ~ 240VAC 220 ~ 240VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 200W 200WVoltage 12Vdc 24VdcCurrent Range 0 ~ 16.8A 0 ~ 8.4AEfficiency 91% 93%Connections (input) 300mm UL SVT 3C 18AWG 300mm UL SVT 3C 18AWGConnections (output) 300mm UL 2517 2C 14AWG 300mm UL 2517 2C 14AWGWeight 1000g 1000g Dimensions L 249 x W 70 x H 40mm L 249 x W 70 x H 40mm
Part Code PCV12240E PCV24240EInput Voltage 100 ~ 240VAC 100 ~ 240VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 192W 240WVoltage 12Vdc 24VdcCurrent Range 0 ~ 16A 0 ~ 10AEfficiency 91% 93%Connections (input) 300mm UL SVT 3C 18AWG 300mm UL SVT 3C 18AWGConnections (output) 300mm UL 2517 2C 14AWG 300mm UL 2517 2C 14AWGWeight 1100g 1100g Dimensions L 249 x W 70 x H 40mm L 249 x W 70 x H 40mm
PCV200E SERIES - 200W IP67 LED DRIVERS
PCV240E SERIES - 240W IP67 LED DRIVERS
RATED
IP67
RATED
IP67
200 WATTS
200 WATTS192 WATTS
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 36
PCC4 SERIES - 4W LED DRIVERS
Part Code PCC2604 PCC3504 PCC5004 PCC7004
Input Voltage 100 ~ 240VAC 100 ~ 240VAC 100 ~ 240VAC 100 ~ 240VAC
Input Frequency 47/63Hz 47/63Hz 47/63Hz 47/63Hz
Power Factor 0.4 0.4 0.4 0.4
Power 4W 4W 4W 4W
Voltage Range 2 ~ 15Vdc 2 ~ 12Vdc 2 ~ 8Vdc 2 ~ 6Vdc
Current Range 260mA 350mA 500mA 700mA
Weight 24g 24g 24g 24g
Dimensions L 38 x W 27 x H 21mm L 38 x W 27 x H 21mm L 38 x W 27 x H 21mm L 38 x W 27 x H 21mm
LED Power & Control - Constant Current
W
L
H
PCC4 Series 4W Driver Mechanical
RATED
IP65
Product Features• 4W to 200W Models available• Multiple form factors• All types of dimming• Fixed and selectable output options• Overload, short circuit and over voltage protections
The PowerLed range of constant current drivers are available in many form factors and IP ratings. Designed to operate and improve the reliability of LED lighting applications.
4 WATTS
37
PCC12 SERIES - 12W LED DRIVERSPart Code PCC35012 PCC50012 PCC70012 PCC105012Input Voltage 220 ~ 240VAC 220 ~ 240VAC 220 ~ 240VAC 220 ~ 240VACInput Frequency 47/63Hz 47/63Hz 47/63Hz 47/63Hz Power Factor 0.80 0.80 0.80 0.80Power 12W 12W 12W 12WVoltage Range 2 ~ 34Vdc 2 ~ 24Vdc 2 ~ 17Vdc 2 ~ 12VdcCurrent Range 350mA 500mA 700mA 1050mAEfficiency 81% 82% 81% 80%Connections Screw Terminal on I/P & O/P Screw Terminal on I/P & O/P Screw Terminal on I/P & O/P Screw Terminal on I/P & O/P Weight 60g 60g 60g 60g Dimensions L 98 x W 39 x H 22mm L 98 x W 39 x H 22mm L 98 x W 39 x H 22mm L 98 x W 39 x H 22mm
L
WH
PCC12 Series 12W Driver Mechanical
PCC20 SERIES - 20W LED DRIVERS
Part Code PCC35020 PCC50020 PCC70020 PCC105020Input Voltage 220 ~ 240VAC 220 ~ 240VAC 220 ~ 240VAC 220 ~ 240VACInput Frequency 47/63Hz 47/63Hz 47/63Hz 47/63Hz Power Factor 0.80 0.80 0.80 0.80Power 20W 20W 20W 20WVoltage Range 2 ~ 58Vdc 2 ~ 40Vdc 2 ~ 29Vdc 2 ~ 19VdcCurrent Range 350mA 500mA 700mA 1050mAEfficiency 82% 84% 83% 82%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/P Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 100g 100g 100g 100g Dimensions L 113 x W 44 x H 28mm L 113 x W44 x H 28mm L 113 x W44 x H 28mm L 113 x W 44 x H 28mm
W
L
H
PCC20 Series 20W Driver Mechanical
RATED
IP20
RATED
IP2020 WATTS
12 WATTS
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 38
PCC60 SERIES - 60W LED DRIVERSPart Code PCC105060 PCC140060Input Voltage 100 ~ 240VAC 100 ~ 240VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 60W 60WVoltage Range 35 ~ 57Vdc 26 ~ 43VdcCurrent Range 1050mA 1400mAEfficiency 85% 85%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/P Weight 300g 300gDimensions L 184 x W 61 x H 32mm L 184 x W 61 x H 32mm
RATED
IP20
PCC40 SERIES - 40W LED DRIVERSPart Code PCC70040 PCC105040 PCC140040Input Voltage 100 ~ 240VAC 100 ~ 240VAC 100 ~ 240VACInput Frequency 47/63Hz 47/63Hz 47/63Hz Power Factor 0.95 0.95 0.95Power 40W 40W 40WVoltage Range 2 ~ 57Vdc 2 ~ 38Vdc 2 ~ 28VdcCurrent Range 700mA 1050mA 1400mAEfficiency 87% 87% 85%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 190g 190g 190gDimensions L 166 x W 52 x H 24mm L 166 x W 52 x H 24mm L 166 x W 52 x H 24mm
W
L
HW
L
H
PCC60 Series 60W Driver Mechanical
PCC40 Series 40W Driver Mechanical
RATED
IP2040 WATTS
60 WATTS
39
RATED
IP67DIMMABLE
Part Code PEC-V01C-PD PEC-V01G-PDDimming Function 1 ~ 10V, PWM or resistive dimming 1 ~ 10V, PWM or resistive dimmingInput Voltage 90 ~ 305VAC 90 ~ 305VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 16W 16WVoltage 12Vdc 24VdcCurrent Range 0 ~ 1.34A 0 ~ 0.67AEfficiency 83% 84.5%Connections (input) 300mm SJTW 2C 18AWG 300mm SJTW 2C 18AWGConnections (output) 300mm SJTW 4C 18AWG 300mm SJTW 4C 18AWGWeight 210g 210g Dimensions L 148 x W 40 x H 32mm L 148 x W 40 x H 32mm
PEC-V01-PD SERIES - 16W IP67 LED DRIVERS
The PowerLed range of IP67 Drivers are designed to
operate and improve the reliability of LED lighting
applications. Offering an input mains capability of up
to 305VAC a power factor of 0.97; and efficiency figures of greater than 80%, these
high reliability drivers are a suitable choice
for many outdoor installations.
Product Features• 16W to 320W models available• High Efficiency• Built in 1-10Vdc, PWM signal, resistive, triac & DALI dimming options available• High PFC >0.9• Over load, short circuit and over voltage protections• SELV Equivalent• Cooling by free air convection• Class II output• Long life and high reliability
LED Power & Control - Constant Voltage Dimming IP67 Rated
L
HW
PEC-V01-PD & PEC-V02-PD Mechanical
16 WATTS
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 40
Outdoor LED drivers designed by PowerLed, to operate and improve the
reliability of LED lighting applications outdoors. These outdoor LED drivers have
IP67 waterproof ratings so that they are resistant to ingress from water to the level of low pressure jets and totally protected
against dust; making them ideal for the majority of outdoor lighting solutions.
Part Code PEC-V02C-PD PEC-V02G-PDDimming Function 1 ~ 10V, PWM or resistive dimming 1 ~ 10V, PWM or resistive dimmingInput Voltage 90 ~ 305VAC 90 ~ 305VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 25W 25WVoltage 12Vdc 24VdcCurrent Range 0 ~ 2.1A 0 ~ 1.05AEfficiency 84% 85.5%Connections (input) 300mm SJTW 2C 18AWG 300mm SJTW 2C 18AWGConnections (output) 300mm SJTW 4C 18AWG 300mm SJTW 4C 18AWGWeight 360g 360g Dimensions L 148 x W 40 x H 32mm L 148 x W 40 x H 32mm
PEC-V02-PD SERIES - 25W IP67 LED DRIVERS
L
HW
PEC-V01-PD & PEC-V02-PD Mechanical
RATED
IP6725 WATTS DIMMABLE
41
Part Code PEC-V04C-PD PEC-V04G-PDDimming Function 1 ~ 10V, PWM or resistive dimming 1 ~ 10V, PWM or resistive dimmingInput Voltage 90 ~ 305VAC 90 ~ 305VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 40W 40WVoltage 12Vdc 24VdcCurrent Range 0 ~ 3.34A 0 ~ 1.67AEfficiency 84% 87%Connections (input) 300mm SJTW 2C 18AWG 300mm SJTW 2C 18AWGConnections (output) 300mm 2464 2C 14AWG & 22AWG 300mm 2464 2C 14AWG & 22AWGWeight 450g 450g Dimensions L 162.5 x W 43.5 x H 32mm L 162.5 x W 43.5 x H 32mm
Part Code PEC-V06C-PD PEC-V06G-PDDimming Function 1 ~ 10V, PWM or resistive dimming 1 ~ 10V, PWM or resistive dimmingInput Voltage 90 ~ 305VAC 90 ~ 305VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 60W 60WVoltage 12Vdc 24VdcCurrent Range 0 ~ 5A 0 ~ 2.5AEfficiency 86% 89%Connections (input) 300mm SJTW 2C 18AWG 300mm SJTW 2C 18AWGConnections (output) 300mm 2464 2C 14AWG & 22AWG 300mm 2464 2C 14AWG & 22AWGWeight 450g 450g Dimensions L 162.5 x W 43.5 x H 32mm L 162.5 x W 43.5 x H 32mm
PEC-V04-PD SERIES - 40W IP67 LED DRIVERS
PEC-V06-PD SERIES - 60W IP67 LED DRIVERSS
L
HW
PEC-V04-PD & PEC-V06-PD Mechanical
, PWM or resistive dimming
, PWM or resistive dimming
RATED
IP67
RATED
IP67
40 WATTS
60 WATTS
DIMMABLE
DIMMABLE
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 42
Part Code MWH-V12C-BP MWH-V12G-BPDimming Function 1 ~ 10V, PWM or resistive dimming 1 ~ 10V, PWM or resistive dimmingInput Voltage 90 ~ 305VAC 90 ~ 305VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 120W 120WVoltage 12Vdc 24VdcCurrent Range 0 ~ 10A 0 ~ 5AEfficiency 92% 93%Connections (input) 300mm SJTW 3C 18AWG 300mm SJTW 3C 18AWGConnections (output) 300mm SJTW 2C 14AWG & 18AWG 300mm SJTW 2C 14AWG & 18AWGWeight 1120g 1120g Dimensions L 220 x W 68 x H 38.8mm L 220 x W 68 x H 38.8mm
Part Code MWH-V24C-BP MWH-V24G-BPDimming Function 1 ~ 10V, PWM or resistive dimming 1 ~ 10V, PWM or resistive dimmingInput Voltage 90 ~ 305VAC 90 ~ 305VACInput Frequency 47/63Hz 47/63Hz Power Factor 0.95 0.95Power 192W 240WVoltage 12Vdc 24VdcCurrent Range 0 ~ 16A 0 ~ 10AEfficiency 90% 93%Connections (input) 300mm SJTW 3C 18AWG 300mm SJTW 3C 18AWGConnections (output) 300mm SJTW 2C 14AWG & 18AWG 300mm SJTW 2C 14AWG & 18AWGWeight 1300g 1300gDimensions L 244.2 x W 68 x H 38.8mm L 244.2 x W 68 x H 38.8mm
MWH-V12-BP SERIES - 120W IP67 LED DRIVERS
MWH-V24-BP SERIES - 240W IP67 LED DRIVERS
MWH-V12-BP Series 120W Driver Mechanical
HW
L
RATED
IP67
RATED
IP67
, PWM or resistive dimming
, PWM or resistive dimming
120 WATTS
240 WATTS192 WATTS
DIMMABLE
DIMMABLE
43
LED Power & Control - Constant Voltage Triac Drivers
UVC25TD - 25W CONSTANT VOLTAGE TRIAC DRIVER
Part Code UVC1225TD UVC2425TD Dimming Function Mains dimmable Mains dimmableInput Voltage 220 ~ 240VAC 220 ~ 240VACInput Frequency 50/60Hz 50/60HzPower Factor 0.95 0.95Power 25W 25WVoltage 12Vdc 24VdcCurrent Range 0 ~ 2.08A 0 ~ 1.04AEfficiency 80% 80%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 110g 110g Dimensions L 122 x W 52 x H 30mm L 122 x W 52 x H 30mm
RATED
IP44
UVC25TD Constant Voltage Triac Dimmer Mechanical
L
HW
25 WATTS
Key Features
• Fully isolated• Short circuit, over current and over voltage protection up to 80% efficiency• Fire resistant plastic cover• Compatible with leading and trailing edge dimmers• 10 ~ 100% Dimming load and dimming range• Push terminals for easy installation• IP44 design for indoor use• 2 year warranty
w terminal on I/P & O/P
DIMMABLE
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 44
UVC50TD - 50W CONSTANT VOLTAGE TRIAC DRIVERS
Part Code UVC1250TD UVC2450TDDimming Function Mains dimmable Mains dimmableInput Voltage 220 ~ 240VAC 220 ~ 240VACInput Frequency 50/60Hz 50/60Hz Power Factor 0.95 0.95Power 50W 50WVoltage 12Vdc 24VdcCurrent Range 0 ~ 4.16A 0 ~ 2.08AEfficiency 80% 80%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 200g 200gDimensions L 166 x W 52 x H 24mm L 166 x W 52 x H 24mm
UVC50TD Constant Voltage Triac Dimmer Mechanical
L
HW
RATED
IP4450 WATTS DIMMABLE
45
PCV80TD - 80W CONSTANT VOLTAGE TRIAC DRIVERS
Part Code PCV1280TD PCV2480TDDimming Function Mains dimmable Mains dimmableInput Voltage 180 ~ 240VAC 180 ~ 240VACInput Frequency 50/60Hz 50/60Hz Power Factor 0.95 0.95Power 66W 80WVoltage 12Vdc 24VdcCurrent Range 0 ~ 5.5A 0 ~ 3.3AEfficiency 80% 80%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 503g 503g Dimensions L 190 x W 65 x H 29mm L 190 x W 65 x H 29mm
RATED
IP20
PCV80TD Constant Voltage Triac Dimmer Mechanical
29m
m
190mm
65m
m
60% ~ 100% load to ensure smooth and stable dimming.60~100%
80 WATTS66 WATTS DIMMABLE
DIMMABLE
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 46
PCC9TD SERIES - 9W CONSTANT CURRENT TRIAC DRIVER
Part Code PCC35009TDDimming Function Trailing Edge DimmableInput Voltage 220 ~ 240VACInput Frequency 50/60Hz Power Factor 0.95Power 9WVoltage Range 6 ~ 26VdcCurrent Range 350mA Efficiency 80%Connections Screw terminal on I/P & O/PWeight 70gDimensions L 130 x W 44 x H 28mm
PCC9TD Series 9W Driver Mechanical
WH
L
PCC12TD Series 12W Driver Mechanical
PCC12TD SERIES - 12W CONSTANT CURRENT TRIAC DRIVERS
Part Code PCC35012TD PCC50012TD PCC70012TD PCC105012TDDimming Function Trailing Edge Dimmable Trailing Edge Dimmable Trailing Edge Dimmable Trailing Edge DimmableInput Voltage 220 ~ 240VAC 220 ~ 240VAC 220 ~ 240VAC 220 ~ 240VACInput Frequency 47/63Hz 47/63Hz 47/63Hz 47/63Hz Power Factor 0.95 0.95 0.95 0.95Power 12W 12W 12W 12WVoltage Range 12 ~ 35Vdc 8 ~ 24Vdc 5 ~ 18Vdc 3 ~ 12VdcCurrent Range 350mA 500mA 700mA 1050mAEfficiency 80% 80% 78% 76%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/P Screw terminal on I/P & O/P Screw terminal on I/P & O/P Weight 70g 70g 70g 70g Dimensions L 98 x W 39 x H 22mm L 98 x W 39 x H 22mm L 98 x W 39 x H 22mm L 98 x W 39 x H 22mm
LED Power & Control - Constant Current Dimming
RATED
IP20
RATED
IP20
H
L
W
9 WATTS
12 WATTS
DIMMABLE
DIMMABLE
47
Part Code PCC50030TD PCC70036TD PCC105036TDDimming Function Trailing Edge Dimmable Leading & Trailing Edge Dimmable Leading & Trailing Edge Dimmable Input Voltage 220 ~ 240VAC 220 ~ 240VAC 220 ~ 240VACInput Frequency 47/63Hz 47/63Hz 47/63Hz Power Factor 0.90 0.95 0.95Power 30W 36W 36WVoltage Range 30 ~ 56Vdc 28 ~ 56Vdc 19 ~ 38VdcCurrent Range 500mA 700mA 1050mAEfficiency 85% 89% 88%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 100g 100g 100g Dimensions L 166 x W 52 x H 24mm L 166 x W 52 x H 24mm L 166 x W 52 x H 24mm
PCC36TD SERIES - 36W CONSTANT CURRENT TRIAC DRIVERS
PCC18TD SERIES - 18W CONSTANT CURRENT TRIAC DRIVERS
Part Code PCC35018TD PCC50018TD PCC70018TD PCC105018TDDimming Function Leading or Trailing Edge DimmableInput Voltage 220 ~ 240VAC 220 ~ 240VAC 220 ~ 240VAC 220 ~ 240VACInput Frequency 47/63Hz 47/63Hz 47/63Hz 47/63Hz Power Factor 0.95 0.95 0.95 0.95Power 18W 18W 18W 18WVoltage Range 26 ~ 52Vdc 18 ~ 36Vdc 13 ~ 26Vdc 9 ~ 18VdcCurrent Range 350mA 500mA 700mA 1050mAEfficiency 82% 80% 78% 76%Connections Screw terminal on I/P & O/P Screw terminal on I/P & O/P Screw terminal on I/P & O/P Screw terminal on I/P & O/PWeight 150g 150g 150g 150g Dimensions L 130 x W 44 x H 28mm L 130 x W 44 x H 28mm L 130 x W 44 x H 28mm L 130 x W 44 x H 28mm
H
L
W
L
HW
PCC18TD Series 18W Driver Mechanical
PCC36TD Series 36W Driver Mechanical
RATED
IP20
RATED
IP20
18 WATTS
36 WATTS30 WATTS
DIMMABLE
DIMMABLE
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 48
2 IN 1 DIMMING CONSTANT CURRENT LED DRIVERSPart Code CV25 CV40 CV60Dimming Function 0 ~ 10Vdc or 10V PWM signal 0 ~ 10Vdc or 10V PWM signal 0 ~ 10Vdc or 10V PWM signalInput Voltage 180V ~ 277VAC 180 ~ 295VAC 180 ~ 295VACInput Frequency 47/63Hz 47/63Hz 47/63Hz Power Factor 0.94 0.98 0.98Power 25W 42W 60.3WVoltage Range 6 ~ 54Vdc 2 ~ 100Vdc 2 ~ 90VdcCurrent Range 350 ~ 1050mA* 350 ~ 1050mA* 500 ~ 1400mA*Efficiency 86% 91% 92%Weight 240g 240g 240g Dimensions L 105 x W 68 x H 23mm L 123.5 x W 81.5 x H 23mm L 123.5 x W 81.5 x H 23mm
W
L
H
CV25 & DAL125 Mechanical
*Selectable via dip switch
2 IN 1 DIMMING CONSTANT RATED
IP2060.3 WATTS42 WATTS25 WATTS DIMMABLE
49
DALI/PUSHDIM DIMMING CONSTANT CURRENT LED DRIVERSPart Code DAL125 DAL140 DAL160Dimming Function Dali interface or push dimming Dali interface or push dimming Dali interface or push dimmingInput Voltage 180V ~ 277VAC 180 ~ 295VAC 180 ~ 295VACInput Frequency 47/63 Hz 47/63Hz 47/63Hz Power Factor 0.94 0.98 0.98Power 25W 42W 60.3WVoltage Range 6 ~ 54Vdc 2 ~ 100Vdc 2 ~ 90VdcCurrent Range 350 ~ 1050mA* 350 ~ 1050mA* 500 ~ 1400mA*Efficiency 86% 90.5% 91.5%Weight 240g 240g 240g Dimensions L 105 x W 68 x H 23mm L 123.5 x W 81.5 x H 23mm L 123.5 x W 81.5 x H 23mm
WH
L
CV40, CV60 & DAL140, DAL160 Mechanical
DALI is a trademark or registered trademark of ZVEI -
Zentralverband Elektrotechnik - und Elektronikindustrie.
*Selectable via dip switch
RATED
IP2060.3 WATTS42 WATTS25 WATTS DIMMABLE
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 50
Product Features• Comprehensive range of controllers suitable for indoor LED lighting
• Intelligent dimmers capable of RGB colour adjustment
• DALI, DMX, 1-10V, PUSH and Constant voltage controllers available
• 0-100% dimming range via logarithmic characteristics, perfect for human vision
• 256 levels of grey scales with smooth dimming control
• Power repeater available for increased lengths of LED Strip
• Can be used in conjunction with all PowerLed CV drivers
DALI SERIES CONTROLLER
DAL1DIM1 & DAL1DIM4 Mechanical
Part Code DAL1DIM1 DAL1DIM4 DAL1DIM1-8A DAL1DIM4-8A DAL1DIM1PInput Voltage 12 ~ 36VDC 12 ~ 36VDC 12 ~ 36VDC 12 ~ 36VDC 12 ~ 36VDCMax Load Current 4 x 5A 4 x 5A 4 x 8A 4 x 8A 4 x 5A Rated Power 4 x (60-180)W 4 x (60-180)W 4 x (96-288)W 4 x (96-288W) 4 x (60-180)WLoad Regulation ±0.4% ±0.4% ±0.4% ±0.4% ±0.4%Addresses 1 4 1 4 1TA -20°C ~ +50°C -20°C ~ +50°C -20°C ~ +50°C -20°C ~ +50°C -20°C ~ +50°CTC +75°C +75°C +75°C +75°C +75°C Additional Functions - - - - Push DimmerDimensions 160 x 45 x 18mm 160 x 45 x 18mm 178 x 46 x 18mm 168 x 58 x 28mm 176 x 46 x 18mm
RATED
IP20
LED Power & Control - LED Controllers
DAL1DIM4-8A Mechanical DAL1DIM4-8A Mechanical
160mm
45m
m18
mm
168mm
58m
m28
mm
178mm
46m
m18
mm
51
160mm
45m
m18
mm
DAL1DIM1P Mechanical
RATED
IP201~10V SERIES CONTROLLERPart Code CVDIM1 CVDIM4 Input voltage 12 ~ 36VDC 12 ~ 36VDC Max load current 4 x 5A 4 x 5A Max output power 4 x (60 ~ 180)W 4 x (60 ~ 180)WSignal channel 1CH 1 ~ 10V input 4CH 1 ~ 10V input 4CH PWM Output 4CH PWM Output Load type Regular LED Regular LED (0.04 ~ 0.1W) (0.04 ~ 0.1W)Dimming 1 ~ 10V 1 ~ 10VTa -20 ~ +50°C -20 ~ +50°C Tc +75°C +75°C Dimensions 178 x 45 x 19mm 178 x 45 x 19mm
178mm
45m
m19
mm
Input1-10V
1
Power SupplyInput 12-36VDCL
N110-240V
23
4
CVDIM4
1-10V Control Unit 1-10V Control Unit 1-10V Control Unit 1-10V Control Unitcomomcomom
k coukukkkkk
.ck.c..ccukukukukukuuukk0V Control Unit 1-10V Controll Unit 1-10V CoC ntrol Unit
Designed in England
RoHS YY Y Y
Input1-10V
1
Power SupplyInput 12-36VDCL
N110-240V1-10V Control Unit
CVDIM1
Designed in England
RoHS YY Y Y
CVDIM1 & CVDIM4 Mechanical
High quality constant voltage 1-10V dimming interface, 4 x 5A channels offer smooth balanced dimming in conjunction with a 1-10V dimmer.
These units allow you to easily add multiple lengths of LED strip to dimmer switches. Use CVDIM1 to control via a single dimmer or control each 5A channel independently using CVDIM4. Power to the LED lengths is achieved by adding a suitable LED diver for the combined power of the LED Load.
Each channel cannot exceed 5A for both CVDIM1 & CVDIM4.
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 52
DMX SERIES CONTROLLER
Part Code DMXDIM Input voltage 12 ~ 36VDC Max load current 3/4/5 x 5A Max output power 3/4/5 x (60 ~ 180)WLoad type Regular LED (0.04 ~ 0.1W)Ta -20 ~ +50°C Tc +75°CAddress Visable Address Dimensions 160 x 57 x 21mm
160mm
57m
m21
mm
160mm
45m
m18
mm
DMXDIM Mechanical
PRDIM Mechanical
LED POWER REPEATER
Part Code PRDIM Input voltage 12 ~ 36VDC Max load current 3/4 x 5A Max output power 3/4 x (60 ~ 180)WLoad type Regular LED (0.04 ~ 0.1W) Ta -20 ~ +50°C Tc +75°C Address PWM Control Dimensions 160 x 45 x 18mm
PRDIM is compatible with the DAL1DIM1, DAL1DIM4, DAL1DIM1P, CVDIM1 & CVDIM4. PRDIM is NOT compatible with the DMXDIM.
RATED
IP20
RATED
IP20
RATED
RGBRF-RC2 CHARGEABLE
LED Power & Control -RGB Colour Controllers & Power Repeaters
RGBRF-RC2 & RGBRF-3x5A RF wireless LED remote controller
Voltage 3.6Vdc min or 4.5VdcOperation Frequency 434MHz/868MHz (chargeable via USB cable)
RGBRF-3X5AVoltage 12-36VdcMax Load Current 3 x 5ARated Power 3 x (60-180)WLoad Type 0.04 ~ 0.1W LEDOperation Frequency 434MHz/868MHzTemperature Range -20°C ~ +50°CTC +75°CRemarks Constant Voltage
114.2mm
7.5
40.8
mm
178mm
47mm
20m
m
RGBRF-RC2 & RGBRF-3x5A Mechanical
Product Features• Suitable for dimming
• Suitable for indoor LED lighting
• User-friendly interface, easy and simple operation
• Highly sensitive and stable touch colour wheel, fast & precise colour control.
• Control for 2 independent zones
• 1 colour changing mode
• Adjustable speed control with 8 levels, quickest speed is 4 S, slowest speed is 256 S.
• Can be operated with power repeaters
53
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 54
Product Features• Suitable for indoor LED lighting
• User-friendly interface, easy and simple operation
• Control up to 6 zones & set 6 scenes at each zone
• 10 Pre-set changing modes, with pause function
• Capable of RGB colour adjustment
• Press button RGBW controller
• Can achieve Red/Green/ Blue/White colour directly
• Synchronization function to ensure consistent pattern changes
• Enables dimming of brightness of each R, G, B, W channels, in order to mix millions of colours
• Three-channel / Four-channel
RGBRF-RC1 & RGBRF-4x5ARF wireless remote control compatible with RGBRF-4x5A or RGBWIFI-4x5A receiver.
RGBRF-RC1Voltage 3.6Vdc min or 4.5Vdc (if using Alkaline Batteries)Operation Frequency 434MHz/868MHzPower 3pcs AAA (1.5V) batteries (Batteries not included)
RGBRF-4X5AVoltage 12-36VdcMax Load Current 3/4/5 x 5ARated Power 3/4 x (60-180)WLoad Type 0.04 ~ 0.1WTemperature Range -20°C ~ +50°CTC +75°CRemarks Constant Voltage
140mm 17
48m
m
RGBRF-RC1 & RGBRF-4x5A Mechanical
178mm
57m
m21
mm
55
Smart Phone iOS & Android Compatible
••
Product Features• Suitable for indoor LED lighting
• User-friendly interface, easy and simple operation
• Control up to 4 zones & set 4 scenes at each zone
• 10 Pre-set changing modes, with pause function
• Capable of RGB colour adjustment
• Press button RGBW controller
• Can achieve Red/Green/Blue/ White colour directly
• Synchronization function to ensure consistent pattern changes
• Able to control the brightness of each R, G, B, W channels, in order to mix millions of colours
• Three-channel/Four-channel
RGBRF-WM RF wireless wall mounted LED controller compatible with RGBRF-4x5A or RGBWIFI-4x5A Receiver
RGBRF-WM
RGBWIFI-4X5A
Part Code RGBRF-WM Voltage 100 ~ 240VAC Operation Frequency 434MHz/888MHz
Part Code RGBWIFI-4x5AVoltage 12 ~ 36VdcMax Load Current 4 x 5A Rated Power 4 x (60-180)WLoad Type 0.04 ~ 0.1WTemperature Range -20°C ~ +50°C
88m
m
88mm 29.1
RGBRF-WM & RGBWIFI-4x5A Mechanical
178mm
57m
m21
mm
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 56
Product Features• Remote Single Colour LED Dimming Controllers
• Multiple levels of light brightness adjustment with short-cut fixed settings
• Ultra slim design
• Easy to pair dimmer unit with more controllers
• Auto memory recall function
• 15 metre transmission distance
• Status Indicator Light
LED Dimmer Unit Mechanical
LED DIMMER UNITPower Connection AWG16 Red / Black CableLED Connection AWG16 Red / Black CableWeight 19gDimensions 87 x 21 x 8.5mmCable Length 150mm
PROFESSIONAL RF WIRELESS REMOTE SINGLE COLOUR LED CONTROLLER DIMMING KIT
Part Code SCC206Voltage 5 ~ 24VDCRated Output Current 15ARemote Type RF wireless card remote controllerOperation Frequency 433.92MhzRemote Control Battery CR2025 3V Cell BatteryTransmission Power <10dBMTransmission Distance >15 metresRemote Control Pairing Can be paired with up to 3 controllersPWM Control 256 levelsPWM Frequency 500Hz-8KHz adjustable (1Khz default)Components & PCB SMD parts / Double sided FR-4 pcbProtection Over Temperature Reverse PolarityWorking Temperature -30 ~ 80°CWeight 16gDimensions 86 x 40 x 6.5mm
Dynamic Mode 8 ModesDynamic Speed Levels 10 LevelsBrightness Levels 10 LevelsShortcut Brightness Levels 4 Levels
FUNCTIONS
BRIGHT
BRIGHT
-+
100%
50%10%
25%
LED D
imm
er
86mm
87mm
21mm
8.5
150mm 150mm
40mm
6.5
LED
5-24V
MO
DE+
SPEED+
MO
DE-
SPEED-
LED Power & Control -Single Colour Controllers & Dimmer Kits
57
Product Features• Remote RGB LED Dimming Controllers
• Multiple levels of brightness adjustment with short cuts to fixed settings
• Ultra slim design
• Easy to pair dimmer unit with more controllers
• Auto memory recall function
• 15 metre transmission distance
• Wide range inputs
• Suitable for 12VDC & 24VDC LED Strip
MINI RF WIRELESS REMOTE SINGLE COLOUR LED CONTROLLER DIMMING KIT
Part Code SCD107WVoltage 5 ~ 24VDCRated Output Current 5ARemote Type RF wireless card remote controllerOperation Frequency 433.92MhzRemote Control Battery CR2025 3V Cell BatteryTransmission Power <10dBMTransmission Distance >15 metresRemote Control Pairing Can be paired with up to 3 controllersPWM Control 64 levelsPWM Frequency 1.65KhzComponents & PCB SMD Parts / Double sided FR-4 pcbProtection Over Temperature Reverse PolarityWorking Temperature -30 ~ 70°CWeight 16gDimensions 86 x 40 x 6.5mm
Brightness Levels 64 LevelsShortcut Brightness Levels 6 Levels
LED Dimmer Unit Mechanical
FUNCTIONS
LED DIMMER UNITPower Connection AWG16 Red / Black CableLED Connection AWG16 Red / Black CableWeight 7gDimensions 45 x 13 x 6mmCable Length 110mm
BRIGHT
BRIGHT
-+
100%80%
60%
10%20%
40%
LED D
imm
er
86mm
6.5
45mm110mm 110mm
13mm
40mm
LED DimmerWith RF Remote ControlRated Output Current 5A
LED
5-24V
6
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 58
Product Features• Remote RGB LED Dimming Controllers
• RGB White can be used independently
• RGB static colour selection with 6 direct selection buttons
• Ultra slim design
• Easy to pair dimmer unit with more controllers
• Over temperature, overload and short circuit protections
• RGBW 4 channel output
PROFESSIONAL RF WIRELESS RGBW LED CONTROLLER KIT
Part Code RGB18Voltage 6 ~ 24VDCRated Output Current 4A + 3x2.5ARemote Type RF wireless card remote controllerOperation Frequency 433.92MhzRemote Control Battery CR2025 3V Cell BatteryTransmission Power <10dBMTransmission Distance >15 metresRemote Control Pairing Can be paired with up to 3 controllersZones 3 (When using RGB-RP Slave)PWM Control 256 levelsPWM Frequency 500KHz-8KHz Adjustable (512Kz Default)Components & PCB SMD parts / 4-layer FR-4 pcbWorking Temperature -30 ~ 80°CWeight 27gDimensions 113 x 52 x 5mm
Dynamic Mode 34 modesDynamic Speed Levels 10 levelsStatic Colour 30 ColoursBrightness Levels 5 Levels for RGB, 10 Levels for White
FUNCTIONS
113mm
52mm
5
WHITE
ONLY
WHITE
OFF
WHITE
COLOURCOLOUR+COLOUR-
MO
DE-
SPEED-
SPEEDM
ODE
++
87mm115mm 115mm
RGBW
LED
6-24V
8.521m
m
LED Dimmer Unit Mechanical
LED DIMMER UNITPower Connection AWG16 Red / Black CableLED Connection AWG18 Flat CableWeight 20gDimensions 87 x 21 x 8.5mmCable Length 115mm
85mm100mm 100mm
RGBW
LED
6-24V
8.5
21m
m
RGB-RP Mechanical
RGB-RP
To be used with RGB18 only.
Part Code RGB-RPVoltage 6 ~ 24VDCRated Output Current White 4A + RGB 3x2.5A ChannelsOutput channels 4Temperature -30 ~ 80°CWeight 62gDimensions 85 x 21 x 8.5mm
59
Product Features• Designed for extending quantity of RGB LED strip lengths that can be used together
• Provides channel outputs
• Easy installation
• Use with one RGB controller to control multiple connections
• To be used with RGB18 only
• RGBW 4 channel output
• Ultra slim design
87mm120mm 120mm
RGB LED
6-24V
8.521m
m
122mm
35mm
9
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 60
Product Features• Remote RGB LED Dimming Controllers
• Bluetooth compatible
• Supported by iOS or Android device
• Ultra slim design
• Easy RGB Colour and Dynamic Settings
• Flicker Free Adjustable
• 10 metre transmission distance
RF WIRELESS SMART PHONE RGB LED CONTROLLER KIT
Part Code RGBW328WVoltage 6 ~ 24VDCRated Output Current 3 x 5ASmartphone Connection iOS or Android deviceSmartphone App Name ColorEasy 3 PlusSmartphone Distance >10MRF Remote Distance >15M for hand held ~ >8M from wall switchOperation Remote frequency 433.92MHzRemote Control Battery CR2025 3V Cell BatteryBluetooth Control Distance >10mRemote Control Pairing Can be paired with up to 5 controllersPWM Control 256 levelsPWM Frequency 512-8Khz adjustableComponents & PCB SMD parts / 4-layer FR-4 pcbWorking Temperature -30 ~ 80°CWeight 29gDimensions 122 x 35 x 9mm
Dynamic Mode 42 modesDynamic Speed Levels 100 levelsStatic Colour 16 Colours
FUNCTIONS
LED DIMMER UNITConnection method Bluetooth V2.1/4.0 Class 2Power Connection AWG16 Red / Black CableLED Connection AWG18 Flat CableWeight 20gDimensions 87 x 21 x 8.5mmCable Length 115mm
RF Wireless Smart Phone RGB LED Controller Mechanical
Smart Phone iOS & Android Compatible
••
61
FUNCTIONS
Product Features• Ultra slim design
• Over temperature, overload and short
circuit protections
• 15 metre transmission distance
• Auto Recall Function
• Easy ‘Plug and Play’ technology
• Wide 5 ~ 24VDC input range
• Reverse polarity protection
• Small compact design
TOUCH KEY CONSTANT VOLTAGE DIMMING CONTROLLER
Part Code PD2021Voltage 5 ~ 24VDCRated Output Current 8AControl Mode Single press key button ~ Press On/Off, press and hold for dimmingPWM Control 256 levelsPWM Frequency 1KhzComponents & PCB SMD parts / Double sided FR-4 pcbWorking Temperature -30 ~ 70°CPower Connection AWG 18 Red / Black cableLED Connection AWG 18 Red / Black cableKey Connection AWG 22 White cableCable Length 150mmWeight 9gDimensions 46 x 12 x 5mm
Brightness Levels 256 Levels
FUNCTIONS
Touch Key Constant Voltage Dimming Controller Mechanical
Mini Touch Key Constant Voltage Dimming Controller Mechanical
46mm150mm 110mm
LED DimmerPress Key Control / Full Protection
Rated Output Current 8A
LED
5-24V
512mm
MINI TOUCH KEY CONSTANT VOLTAGE DIMMING CONTROLLER
Part Code PDMINIVoltage 5 ~ 24VDCRated Output Current 5AControl Mode Three press buttonsPWM Control 256 levelsPWM Frequency 1KhzComponents & PCB SMD parts / Double sided FR-4 pcbWorking Temperature -30 ~ 70°CPower Connection AWG 18 Red / Black cableLED Connection AWG 18 Red / Black cableCable Length 110mmDimensions 33 x 12 x 5mm
Dynamic Mode 7 ModesDynamic Speed Levels 10 LevelsBrightness Adjustment Up/DownMax Brightness Shortcut YesOn/Off Operation Yes
33mm110mm 110mm
MO
DE
SPEED
LIGH
T
LED
5-24V
512m
m✹
Power & Control
Linear LED drivers for displayA range of low profile, compact LED drivers suitable for incorporating into Lightbox signage, Edgelit, modular sign boxes and canvas covered display applications.
Offering power factor correction, high efficiency, TUV safety approval, and up to 60 watts of regulated DC Power.
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 62
Product Features• Low profile linear design
• High efficiency, power factor corrected design
• Constant voltage
• Ideal for use in linear applications or where space is limited
• Built in PFC
• Plastic and metal case options
• Short circuit protected
• IP20 & IP62 variants
UTR-30
UTR-30U
UTR-60
PCV60E
PCCX2E
63
UTR-30 - SINGLE OUTPUT CONSTANT VOLTAGE DRIVER
UTR-30-U - SINGLE OUTPUT CONSTANT VOLTAGE DRIVER
Part Code UTR12-30 UTR24-30Input Voltage 180 ~ 240VAC 180 ~ 240VACInput Frequency 47 ~ 63Hz 47 ~ 63Hz Power Factor 0.90 0.90Power 30W 30WVoltage 12Vdc 24VdcCurrent Range 2.5A 1.25AEfficiency 85% 85%Connections Screw terminal on I/P & O/PWeight 0.24Kg Dimensions 251 x 30 x 16.7mm
Part Code UTR12-30-U UTR24-30-UInput Voltage 90 ~ 264VAC 90 ~ 264VACInput Frequency 47 ~ 63Hz 47 ~ 63Hz Power Factor 0.90 0.90Power 30W 30WVoltage 12Vdc 24VdcCurrent Range 2.5A 1.25AEfficiency 83% 83%Connections Cables on I/P & O/PWeight 0.13Kg Dimensions 193.4 x 28.3 x 19mm
30m
m
30m
m16
.7251mm
193.4mm
28.3
19
UTR-30 - Mechanical
UTR-30-U Mechanical
RATED
IP20
RATED
IP62
40VAC
30 WATTS
30 WATTS
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 64
UTR-60 - SINGLE OUTPUT CONSTANT VOLTAGE DRIVER
PCV60E - CONSTANT VOLTAGE DRIVER
Part Code UTR12-60 UTR24-60Input Voltage 180 ~ 264VAC 180 ~ 264VACInput Frequency 47 ~ 63Hz 47 ~ 63Hz Power Factor 0.90 0.90Power 60W 60WVoltage 12Vdc 24VdcCurrent Range 0 ~ 5A 0 ~ 2.5AEfficiency 88% 85%Connections Terminals on I/P & O/P Terminals on I/P & O/PWeight 24g 24g Dimensions 304.6 x 30 x 16.7mm 304.6 x 30 x 16.7mm
Part Code PCV1260E PCV2460EInput Voltage 100 ~ 240VAC 100 ~ 240VACInput Frequency 47 ~ 63Hz 47 ~ 63Hz Power Factor 0.95 0.95Power 60W 60WVoltage 12Vdc 24VdcCurrent Range 0 ~ 5.0A 0 ~ 2.5AEfficiency 86% 87%Connections Cable on I/P & O/P Cable on I/P & O/PWeight 450g 450g Dimensions 240 x 30 x 28mm 240 x 30 x 28mm
304.6mm
16.7
30m
m
240mm
30m
m28
mm
UTR-60 Mechanical
PCV60E Mechanical
minals on I/P & O/P
Cable on I/P & O/P
RATED
IP20
RATED
IP67
60 WATTS
60 WATTS
65
Part Code PCC35035x2E PCC50050x2E PCC70070x2EInput Voltage 220 ~ 240VAC 220 ~ 240VAC 220 ~ 240VACInput Frequency 47 ~ 63Hz 47 ~ 63Hz 47 ~ 63HzPower Factor 0.98 0.98 0.98Power 60W 60W 60WVoltage 25 ~ 50Vdc 25 ~ 50Vdc 25 ~ 50VdcCurrent Range 2 x 350mA 2 x 500mA 2 x 700mAEfficiency 91% 91% 92%Connections Terminals on I/P & O/P Terminals on I/P & O/P Terminals on I/P & O/PWeight 150g 150g 150g Dimensions 285 x 30 x 28mm 285 x 30 x 28mm 285 x 30 x 28mm
PCCX2E - CONSTANT CURRENT LED 2 CHANNEL DRIVER RATED
IP65
28m
m30
mm
285mm
PCCx2E Series Mechanical
60 WATTS
LED Light Tiles and Recessed LightsPowerLed offer a range of indoor lights, from the popular wide-angled light distributed L2 tile lights; the ZEN & MINIZ range of recessed ceiling lights; to the FRZ-10 fire rated downlight.
Commercial LED Lighting
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 66
L2
ZEN
MINIZ
FRZ-10
67
Product Features• Designed in England
• Wide-angled light distribution design
• 10-100% corridor function option
• Fitted with an optical diffuser plate reducing glare and achieving equal light
• High CRI (≥80) ensures greater colour definition
• High efficiency LED driver from with stable output ensuring maximum product life
• Superior backlit LED technology
• 88lm/W product
• Seamless in situ design
• Taiwan LED technology
• CE/RoHS compliant
• Driver approved to EN61347-12-13, EN61347-11
• Standard unit fitted with fire proof driver enclosure
Part Code L2C L2N Luminous Flux 3740 3470Input Voltage 115 ~ 230VAC 115 ~ 230VACPower 36W 36WPower Factor 0.9 0.9CRI ≥80 ≥80Input Frequency 47 ~ 63Hz 47 ~ 63HzEfficacy 88lm/W 88lm/WCCT (K) 5000K 4000KDimensions L595 x W595 x H98mm L595 x W595 x H98mm
595mm
98595mm
104
601mm
ECA Compliant
L2 FUNCTIONS
Part Code CCT(K) FunctionalityL2C-1-10V 5000K 1-10V dimmingL2C-DAL1 5000K DALI dimmingL2C-DSI 5000K Digital Serial InterfaceL2C-TD 5000K Triac DimmingL2C-CF 5000K Corridor FunctionL2N-1-10V 4000K 1-10V dimmingL2N-DAL1 4000K DALI dimmingL2N-DSI 4000K Digital Serial InterfaceL2N-TD 4000K Triac DimmingL2N-CF 4000K Corridor Function
Commercial LED Lighting - L2 36W high power energy saving LED light tile
36 WATTS RATED34703740LUMENSLUMENS
IP44
L2 Mechanical
Optional Features:
• Emergency Light Tile Kit: EMPACK2T & EP3KIT
• L2 surface mounting accessory
• PIR700 sensor
• All types of dimming and control available
L595 x W595 x H98mm
L2 Luminance Distribution
L2 LED LIGHT TILE SPECIFICATION
wwwwwwwwwwww2.38m
4.77m
7.15m
9.53m
11.92m
1m
2m
3m
4m
5m
1390lx
348lx
155lx
87lx
56lx
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 68
DALI is a trademark or registered trademark of ZVEI - Zentralverband Elektrotechnik - und Elektronikindustrie.
L2 SERIES SAFETY
L2 EMERGENCY LIGHT TILE L2 CORRIDOR FUNCTION
The L2 series complies with a wide variety of safety requirements including; EN61347-1, EN61347-2-13, EN60598-1,EN60598-2-2, EN62471. Confirmed to comply with the requirements set out by the Enhanced Capital Allowance Scheme, for energy saving technologies and has been tested in accordance with BS EN13032-1:2004, IES LM-79-08 & DD IEC/PAS, 62722-2-1:2011. For evaluation regarding the directive, the following specifications have been met:
• The above LED lighting units use electronic control gear that comply with BS EN 61347-2-13:2006, for DC or AC supplied led modules / BS EN 62384:2006 (as amended), for DC or AC supplied LED modules.
• Lighting units installed indoors comply with the glare and angular exclusion zone recommendations in paragraph 94 of HSG 38 (1997), “Lighting at work!” (ISBN: 9780717612321).
EMPACK2T is a 2W constant current non-maintained LED emergency light system designed to be fitted to the L2 Series of LED light tiles. Capable of providing 3 hours of emergency lighting when fully charged; with charge status LED, the L2 has a test switch with self test function and intelligent automatic charging function.
With sufficient natural light, the sensor switches the light on automatically when motion is detected. After the designated ‘ON-time’ has lapsed, the lamp dims to a preset dimming level if no further motion is detected. The ‘ON-time’ can be set from 30s to 30 mins using the remote control.
The L2 Bezel is a white powder coated chassis for the backlit L2 tile allowing installation in applications requiring surface mounting. This UK manufactured bezel is an affordable surface mount solution, available in any colour to suit any architectural requirement and is simple and quick to install.
L2 SURFACE MOUNTING ACCESSORY
LED Emergency Light packs EMPACK2, EMPACK2T, EP3KIT, EP10 and other lighting accessories can be found from page 108.
See Lighting Accessories - page 113 for more details.
EMPACK2T Kit
L2 LED Tile is available for special order with the following dimming drivers:
• Triac dimming• DALI dimming• Push switch dimming• 3-in-1 dimming (0-10V, Resistive and PWM)• DMX• DSI
DIMMABLE L2 TILE LIGHT OPTIONS
L2 Options
EMERGENCY
E
69
Product Features• Bright lumen output, low glare• High efficiency LED chip and reflector system• Quick connect external dimmable driver included, compatible with leading edge & trailing edge mains dimmers• Energy savings of 85% & low maintenance costs• Anodised aluminium heat sink• Long life - 50k hours• 90° & 100° beam angles• Insulation spacer frame ~ Low heat generation
The ZEN4 and ZEN5 feature insulation spacer frame units, ensuring in service heat dissipation is maintained. The shallow ZEN7 and ZEN8 are ideally suited to office, corridor or communal spaces, even at high levels.
Each ZEN is complete with a mains dimmable driver, compatible with both leading and trailing edge dimmers. Heat resistant sleeving, quick connect connectors (between driver and ZEN module) as well as easy terminal connections are just a few of the features.
Commercial LED Lighting - ZEN Dimmable recessed downlights
This ZEN range is mains dimmable.
Quick and easy connector
OPTIONAL EMERGENCY PACK
Optional emergency pack, EP3KIT, is also available for use with the ZEN Series, if you would like to make the downlights operate as emergency lighting as well.
The EP3KIT Emergency Pack can be found in Accessories on Page 110.
DIMMABLE
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 70
Part Code ZEN4 11W3K-W ZEN4 11W4K-W ZEN4 11W3K-SN ZEN4 11W4K-SNFitting Colour White White Satin Nickel Satin NickelDriver AC Input 220 ~ 240V 220 ~ 240V 220 ~ 240V 220 ~ 240VLumen Output 850lm 900lm 850lm 900lmInput Voltage 31Vdc 31Vdc 31Vdc 31VdcInput Current 350mA 350mA 350mA 350mAPower 11W 11W 11W 11WCRI 80 80 80 80Colour 3000K 4000K 3000K 4000KBeam Angle 90° 90° 90° 90°Working Temperature -30°C ~ +40°C -30°C ~ +40°C -30°C ~ +40°C -30°C ~ +40°CDimensions ∅ 120 x 103mm ∅ 120 x 103mm ∅ 120 x 103mm ∅ 120 x 103mm
120m
m
94mm
103m
m
150m
m
120mm
103m
m
Part Code ZEN5 16W3K-W ZEN5 16W4K-W ZEN5 16W3K-SN ZEN5 16W4K-SNFitting Colour White White Satin Nickel Satin NickelDriver AC Input 220 ~ 240V 220 ~ 240V 220 ~ 240V 220 ~ 240VLumen Output 1200lm 1350lm 1200lm 1350lmInput Voltage 46Vdc 46Vdc 46Vdc 46VdcInput Current 350mA 350mA 350mA 350mAPower 16W 16W 16W 16WCRI 80 80 80 80Colour 3000K 4000K 3000K 4000KBeam Angle 100° 100° 100° 100°Working Temperature -20°C ~ +40°C -20°C ~ +40°C -20°C ~ +40°C -20°C ~ +40°CDimensions ∅ 150 x 103mm ∅ 150 x 103mm ∅ 150 x 103mm ∅ 150 x 103mm
Satin Nickle White
ZEN4 LED LIGHT SPECIFICATION
ZEN5 LED LIGHT SPECIFICATION
11 WATTS
16 WATTS
∅ 100mm
∅ 125mm
RATED
RATED
850
1200
900
1350
LUMENS
LUMENS
LUMENS
LUMENS
IP44
IP44
ZEN5 MechanicalZEN4 Mechanical
BEAM ANGLE
BEAM ANGLE
90°
100°
DIMMABLE
DIMMABLE
∅
∅
PLUG & PLAY
PLUG & PLAY
Part Code ZEN7 22W3K-W ZEN7 22W4K-W ZEN7 22W3K-SN ZEN7 22W4K-SNFitting Colour White White Satin Nickel Satin NickelDriver AC Input 220 ~ 240V 220 ~ 240V 220 ~ 240V 220 ~ 240VLumen Output 1900lm 2000lm 1900lm 2000lmInput Voltage 32Vdc 32Vdc 32Vdc 32VdcInput Current 700mA 700mA 700mA 700mAPower 22W 22W 22W 22WCRI 80 80 80 80Colour 3000K 4000K 3000K 4000KBeam Angle 100° 100° 100° 100°Working Temperature -30°C ~ +40°C -30°C ~ +40°C -30°C ~ +40°C -30°C ~ +40°CDimensions ∅ 195 x 70mm ∅ 195 x 70mm ∅ 195 x 70mm ∅ 195 x 70mm
Part Code ZEN8 35W3K-W ZEN8 35W4K-W ZEN8 35W3K-SN ZEN8 35W4K-SNFitting Colour White White Satin Nickel Satin NickelDriver AC Input 220 ~ 240V 220 ~ 240V 220 ~ 240V 220 ~ 240VLumen Output 2900lm 3000lm 2900lm 3000lmInput Voltage 50Vdc 50Vdc 50Vdc 50VdcInput Current 700mA 700mA 700mA 700mAPower 35W 35W 35W 35WCRI 80 80 80 80Colour 3000K 4000K 3000K 4000KBeam Angle 100° 100° 100° 100°Working Temperature -30°C ~ +40°C -30°C ~ +40°C -30°C ~ +40°C -30°C ~ +40°CDimensions ∅ 225 x 70mm ∅ 225 x 70mm ∅ 225 x 70mm ∅ 225 x 70mm
195m
m
148mm
70m
m
225m
m
176mm
70m
m
ZEN7 LED LIGHT SPECIFICATION
ZEN8 LED LIGHT SPECIFICATION
22 WATTS RATED
1900 2000LUMENS LUMENS
IP44
ZEN8 MechanicalZEN7 Mechanical
35 WATTS RATED
2900 3000LUMENS LUMENS
IP44
71
∅ 170mm BEAM ANGLE
100°
DIMMABLE
∅ 195mm BEAM ANGLE
100°
DIMMABLE
PLUG & PLAY
PLUG & PLAY
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 72
Flux out: 504.1 lm
1m 160.4, 373.31x 198.83cm
2m 40.11, 93.321x 397.66cm
3m 17.83, 41.471x 596.48cm
4m 10.03, 23.331x 795.31cm
5m 6.418, 14.931x 994.14cm
E ave, Emax Angle: 88.39deg Diameter
-/+180 120
90
60
300-30
-60
-90
-120
0
80
160
240
320
400
Average Beam Angle (50%): 90.1 Deg
3000/4000
Height
Average Beam Angle (50%): 99.3 Deg
Flux out: 1256lm
1m 281.4, 768.21x 234.59cm
2m 70.36, 192.01x 469.18cm
3m 31.27, 85.351x 703.77cm
4m 17.59, 48.011x 938.36cm
5m 11.26, 30.731x 1172.95cm
Height E ave, Emax Angle: 99.10deg Diameter
-/+180 120
90
60
300-30
-60
-90
-120
0
160
320
480
640
800
3000k/4000k
-/+180 120
90
60
300-30
-60
-90
-120
0
100
200
300
400
500
Average Beam Angle (50%): 90.1 Deg
Flux out: 638.8 lm
1m 189.6,456.11x 205.46cm
2m 47.40,114.01x 410.92cm
3m 21.0750.6811x 616.38cm
4m 11.858.511x 821.84cm
5m 7.585,18.251x 1027.30cm
Height E ave, Emax Angle: 100.91deg Diameter
3000k/4000k
300
Flux out: 2017lm
1m 436.2, 12021x 242.24cm
2m 109.0, 300.51x 484.74cm
3m 48.47, 133.61x 726.71cm
4m 27.26, 75.121x 968.95cm
5m 17.45, 48.081x 1211.18cm
Height E ave, Emax Angle: 100.91deg Diameter
-/+180 120
90
60
300-30
-60
-90
-120
0
Average Beam Angle (50%): 100.9 Deg
600
900
1200
1500
ZEN4 Luminance Distribution
ZEN7 Luminance Distribution
ZEN5 Luminance Distribution
ZEN8 Luminance Distribution
ZEN RANGE LUMINANCE DISTRIBUTION
73
90m
m
56m
m
Average Beam Angle (50%): 83.7 Deg
Flux out: 313.8lm
1m 132.2, 273.2lx 171.07cm
2m 33.05, 68.30lx 342.14cm
3m 14.69, 30.36lx 513.21cm
4m 8.262, 17.08lx 684.29cm
5m 5.288, 10.93lx 855.36cm
Height E ave, Emax Angle: 81.08 deg Diameter
-/+180 120
90
60
300-30
-60
-90
-120
0
60
120
180
240
300
MINIZ3 Luminance Distribution
Part Code MINIZ3-7W3K-W MINIZ3-7W4K-WFitting Colour White WhiteDriver AC Input 220 ~ 240V 220 ~ 240VPower 7W 7WLumen Output 550lm 550lmIP IP44 IP44CRI 82 82Colour 3000K 4000KBeam Angle 90° 90°Working Temperature -30°C ~ +40°C -30°C ~ +40°CWeight 120g 120gDimensions ∅ 90 x 56mm ∅ 90 x 56mm
Product Features• Bright lumen output, low glare
• High efficiency LED chip and reflector system
• Suitable for operation with leading edge & trailing edge mains dimmers
• Energy savings of 85% & low maintenance costs
• Built in LED driver for easier termination.
• Long life - 50k hours
• 90° beam angle
MINIZ3 Mechanical
Commercial LED Lighting - MINIZ3 Recessed dimmable downlight
MINIZ3 LED LIGHT SPECIFICATION RATED
550LUMENS
IP44
w
Commercial LED Lighting - MINIZ3 Recessed dimmable downlight
The MINIZ downlight range of 7W and
9W LEDs offer up to 750Lm, suitable for operation with most leading and trailing
edge dimmers.
CERTIFIEDCERTIFIED7 WATTS ∅ 70mm BEAM ANGLE
90°
DIMMABLE
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 74
Optional clip on satin nickel trim is available for the MINIZ4.
110m
m
63m
m
Part Code MINIZ4-9W3K-W MINIZ4-9W4K-WFitting Colour White WhiteDriver AC Input 220 ~ 240V 220 ~ 240VPower 9W 9WLumen Output 750lm 750lmIP IP44 IP44CRI 82 82Colour 3000K 4000KBeam Angle 90° 90°Working Temperature -30°C ~ +40°C -30°C ~ +40°CWeight 135g 135gDimensions ∅ 110 x 63mm ∅ 110 x 63mm
Average Beam Angle (50%): 88.0 Deg
Flux out: 449.5lm
1m 158.9, 351.1x 188.91cm
2m 39.72, 87.77x 377.82cm
3m 17.65, 39.01x 566.73cm
4m 9.930, 21.94x 755.65cm
5m 6.355, 14.04x 944.56cm
Height E ave, Emax Angle: 86.73 deg Diameter
-/+180 120
90
60
300-30
-60
-90
-120
0
80
160
240
320
400
MINIZ4 LED LIGHT SPECIFICATION
MINIZ4 Luminance DistributionMINIZ4 Mechanical
Product Features• Bright lumen output, low glare
• High efficiency LED chip and reflector system
• Suitable for operation with leading edge & trailing edge mains dimmers
• Energy savings of 85% & low maintenance costs
• Built in LED driver for easier termination
• Long life - 50k hours
• 90° beam angle
9 WATTS RATEDCERTIFIEDCERTIFIED
750LUMENS
IP44
Commercial LED Lighting - MINIZ4 Recessed dimmable downlight
∅ 92mm BEAM ANGLE
90°
DIMMABLE
FRZ-10 FIRE RATED LED LIGHT SPECIFICATION
75
Commercial LED Lighting - FRZ-10 Fire rated LED downlight
Product Features• Mains dimmable PowerLed driver
(leading and trailing edge)• Fully fire rated 90 minutes• Selectable CCT 3000K, 4000K & 6000K• Interchangeable bezel colours (sold separately)• 60° beam angle - use less fittings• IP65 rated as standard • 5 years RTB warranty
This 10W fire rated LED Downlight is fire rated to 90 minutes, IP65 Waterproof, very low power consumption, CCT selectable LED COB inside.
Part Code FRZ-10Fitting Colour WhiteMaterial Aluminium Alloy & Polycarbonate Drive AC Input 220 ~ 240V 50/60HzDimming Leading and Trailing Edge Mains DimmablePower 10WLumen Output 800lmBeam Angle 60°LED Chip COBCRI 80Weight 380gDimensions Ø 87 x 80mm
FRZ10 Luminance DistributionFRZ-10 Mechanical
Average Beam Angle (45%) 54° Deg
Flux out: 313.8lm
1m 407.01lx 110.86cm
1.5m 180.89lx 166.29cm
2m 101.75lx 221.72cm
2.5m 65.12lx 277.15cm
3m 45.22lx 332.59cm
Height E ave, Emax Angle: 58.0 deg Diameter
-/+180 120
90
60
300-30
-60
-90
-120
0
194
388
582
775
969
87mm
90m
m
87m
m
SELECTABLE COLOUR TEMPERATURES
This FRZ-10 is fully fire rated to 90 minutes, IP65 Waterproof, very low power consumption, available dimmable or nondimmable.
Colour (K) 2700 - 3200K Warm White 4000 - 4500K Neutral White 6000 - 6500K Cool White Lumen Output 800lm CRI 80
10 WATTS RATEDFIRE RATED CCT SELECTABLE
800LUMENS
IP653IN1
Polished Chrome Bezel
(Bezels old separately)
Satin Nickel Bezel
Brass Bezel White Bezel
DIMMABLE∅ 65mm BEAM ANGLE
60°
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 76
CD350 Mechanical
400
200
100
300
0
0 30-30
-90
-60
90
60
-/+180-120 120
1m 128.9, 488.11x 320.37cm
2m 32.122.01x 640.74cm
3m 14.32, 54.231x 961.11cm
4m 8.057, 30.501x 1281.48cm
5m 5.156, 19.521x 1601.85cm
Height E ave, Emax Angle: 116.05deg Diameter
Commercial LED Lighting - OYSTER Bulkhead Lights
OYSTER BULKHEAD LIGHT WITH EMERGENCY PACK - CD350
Part Code CD350 30K CD350 40K CD350 65KFitting Colour White White WhiteInput Voltage 220-240V 220-240V 220-240V Power 22W 22W 22WLumen Output 1350lm 1400lm 1500lmColour 3000K 4000K 6500KWorking Temperature -30°C ~ +40°C -30°C ~ +40°C -30°C ~ +40°CCRI 80 80 80Beam Angle 120° 120° 120°Weight 1400g 1400g 1400gDimensions ∅ 355 x 115mm ∅ 355 x 115mm ∅ 355 x 115mm
355m
m11
5mm
This deeper based OYSTER CD350 comes installed with a three hour, 3W maintained emergency pack including a self test switch.
Product Features• Instant start with no flickering
• Super bright high lumen light
• Corridor function available
• Can be used with PIR700 sensor
• Metal base for superior heat dissipation
• Emergency pack can be fitted as an option
• Energy savings of up to 85% & low maintenance costs
• Long life - average 30k hours
• High performance frosted diffuser
CD350 Luminance Distribution
RATED
IP5422 WATTS BEAM ANGLE
120°
77
TRIO Magnetic LED Light Kit has been designed as a quick and easy to install lighting solution; suitable for cabinets, decorative lighting and general task lighting; use it for display or show case lighting. A range of ultra low profile designs, available in square or round fittings in white, black or silver finish, powered by our ultra slim universal input LED driver.
These 3000K or 6000K light colour Magnetic LED Lights have a clean, diffused 120° beam angle.
Commercial LED Lighting - TRIO Magnetic LED Light Kits
Product Features• Fast fit plug and play design
• Magnetic attachment allows quick, simple fixing, even to glass
• High lumen output, low power
• 3 different finishes in 2 different style fittings
• 3000K or 6000K variants available in all types
• Suitable for cabinets, decorative lighting and general task lighting; use it for display or showcase lighting
• 120° Beam Angle and ‘spot free’ diffused light
Product Features• Instant start with no flickering
• Super bright high lumen light
• Corridor function available
• Can be used with PIR700 sensor
• Metal base for superior heat dissipation
• Emergency pack can be fitted as an option
• Energy savings of up to 85% & low maintenance costs
• Long life - average 30k hours
• High performance frosted diffuser
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 78
TRIO 3W LED MAGNETIC ROUND LIGHT KIT
Part Code TRIO-3RW30K TRIO-3RB30K TRIO-3RS30K TRIO-3RW60K TRIO-3RB60K TRIO-3RS60KFitting Colour White Black Silver White Black SilverDriver AC Input 115 ~ 230V 115 ~ 230V 115 ~ 230V 115 ~ 230V 115 ~ 230V 115 ~ 230VInput Current 330mA 330mA 330mA 330mA 330mA 330mAInput Voltage 12Vdc 12Vdc 12Vdc 12Vdc 12Vdc 12VdcPower 3W x 3 3W x 3 3W x 3 3W x 3 3W x 3 3W x 3Lumen Output 270lm 270lm 270lm 300lm 300lm 300lmColour 3000K 3000K 3000K 6000K 6000K 6000KBeam Angle 120° 120° 120° 120° 120° 120°CRI 80 80 80 80 80 80Weight 65g 65g 65g 65g 65g 65gDimensions ∅ 70 x 11mm ∅ 70 x 11mm ∅ 70 x 11mm ∅ 70 x 11mm ∅ 70 x 11mm ∅ 70 x 11mm
DRIVER TRIO1212
LIGHT
70mm
127mm
49m
m
13mm
Easy quick Connectors
Distributor Cable1000mm
1200mmLight Cables
LIGHT
LIGHT
11mm
Magnetic back Easy AC connection Quick Connections
TRIO Magnetic Round Light Kit Mechanical
Commercial LED Lighting - TRIO Magnetic LED Light Kits
RATED
IP44PLUG & PLAYMAGNETIC3 WATTS
MAGNETIC PLUG & P
BEAM ANGLE
120°
79
TRIO TRIAC DIMMING SERIES
Magnetic back Easy AC connection Quick Connections
LIGHT
70mm
127mm
49m
m
13mm
11mm
70m
m
DRIVER TRIO1212
Easy quick Connectors
Distributor Cable1000mm
1200mmLight Cables
LIGHT
LIGHT
TRIO Magnetic Square Light Kit Mechanical
3W TRIO-TD Series LED Magnetic Round Light Kit
TRIO-3RW30K-TD White ~ 3000KTRIO-3RB30K-TD Black ~ 3000KTRIO-3RS30K-TD Silver ~ 3000KTRIO-3RW60K-TD White ~ 6000KTRIO-3RB60K-TD Black ~ 6000KTRIO-3RS60K-TD Silver ~ 6000K
TRIO-3SW30K-TD White ~ 3000KTRIO-3SB30K-TD Black ~ 3000KTRIO-3SS30K-TD Silver ~ 3000KTRIO-3SW60K-TD White ~ 6000KTRIO-3SB60K-TD Black ~ 6000KTRIO-3SS60K-TD Silver ~ 6000K
3W TRIO-TD Series LED Magnetic Square Light Kit
TRIAC Dimmable TRIOs arealso available, provided with a specific TRIAC Dimming LED driver.
TRIO 3W LED MAGNETIC SQUARE LIGHT KIT
Part Code TRIO-3SW30K TRIO-3SB30K TRIO-3SS30K TRIO-3SW60K TRIO-3SB60K TRIO-3SS60KFitting Colour White Black Silver White Black SilverDriver AC Input 115 ~ 230V 115 ~ 230V 115 ~ 230V 115 ~ 230V 115 ~ 230V 115 ~ 230VInput Current 330mA 330mA 330mA 330mA 330mA 330mAInput Voltage 12Vdc 12Vdc 12Vdc 12Vdc 12Vdc 12VdcPower 3W x 3 3W x 3 3W x 3 3W x 3 3W x 3 3W x 3Lumen Output 270lm 270lm 270lm 300lm 300lm 300lmColour 3000K 3000K 3000K 6000K 6000K 6000KBeam Angle 120° 120° 120° 120° 120° 120°CRI 80 80 80 80 80 80Weight 65g 65g 65g 65g 65g 65gDimensions 70 x 70 x 11mm 70 x 70 x 11mm 70 x 70 x 11mm 70 x 70 x 11mm 70 x 70 x 11mm 70 x 70 x 11mm
Part Code Part Code
RATED
IP44PLUG & PLAYMAGNETIC3 WATTS
UG & PLAY
BEAM ANGLE
120°
TRIAC Dimming LED driver.
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 80
INDUSTRIAL LED LIGHTING
LOWBAY
GENESIS2 & GENESIS3L
TYRO
REVO-IP
INDUSTRIAL LED LIGHTING
Product Features• Extensive range of dimming and intelligent control functions available
• High efficiency power factor corrected Luminaire range
• Lenses available for different lighting schemes (GENESIS Range)
• Emergency /standby lighting options
• IP20/IP54/IP65+ versions available
• High reliability
• Extended warranty options available
• CE RoHS & WEEE certified
Our extensive range of industrial LED lighting options, suited to a large range of Industrial, Commercial and Educational applications. From external area lighting through to office and classroom lighting; our range of LED fixtures provide energy efficient solutions to a number of lighting requirements, offering a realistic opportunity to reduce energy bills without reducing or sacrificing lighting performance.
Industrial LED Lighting
81
Product Features• IP20/IP54 rated LED Lowbay range
• Sleek, lightweight powder coated sheet steel enclosure complete with mounting hooks
• Alanod high grade reflective aluminium reflector
• 10 ~ 100% Occupancy Function Options
• MTBF in excess of 50,000 hours
• PC transparent diffuser ~ optional opaque anti-glare diffuser
• High efficiency using Philips LumiLEDS LED chip and reflector system
Our LOWBAY range provides a viablereplacement to conventional LOWBAY light fittings; offering “instant start” and a flicker free operation. Easy to install and maintenance free with energy savings of up to 85%.
LOWBAY SLIM LED LOW BAY LIGHT
Part Code LOWBAY 8050K LOWBAY 12050K LOWBAY 120+ IP54 LOWBAY 180+ IP54Fitting Colour White White White WhiteLumen Output 6400lm 9600lm 13840lm 20160lm Input Voltage 220 ~ 240Vdc 220 ~ 240Vdc 220 ~ 240Vdc 220 ~ 240Vdc Power 77W 120W 120W 180WWorking Temperature -20°C ~ +35°C -20°C ~ +35°C -20°C ~ +35°C -20°C ~ +35°CCRI 80 80 80 80IP IP20 IP20 IP54 IP54Beam Angle 95° 95° 95° 95°Colour 5000K 5000K 5000K 5000KWeight 5300g 5800g 7980g 7980gDimensions 750 x 330 x 90mm 750 x 330 x 90mm 800 x 330 x 90mm 800 x 330 x 90mm
330m
m
750mm
90
550mm
90 95
330m
m
750mm25 25
LOWBAY 8050K & 12050K Mechanical
LOWBAY 120+ IP54 & 180+ IP54 Mechanical
Industrial LED Lighting - LOWBAY
RATED
IP20RATED
IP54180 WATTS120 WATTS77 WATTS BEAM ANGLE
95°
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 82
Industrial LED Lighting - LOWBAY Optional Features
The LOWBAY range is available with a motion sensor switch as an optional extra. The motion sensor detects movement to turn on and turns off after apre-selected hold-time, when there is no further movement. A daylight sensor is also incorporated to switch off the light when there is sufficient natural light.
Featuring the innovative Daylight Harvesting Sensor and CorridorFunction with our LOWBAY range, controlling your application has become even easier. With the corridor function built in, it is automatically enabled with no additional commissioning effort required. Including a remote to control your functions for dimming and luminous output, users may choose between using pre-set lighting profiles for everyday use, or programming of custom light levels and sequences individually.
LOWBAY Microwave Sensors ~ MS
LOWBAY Microwave Sensors ~ DH & CFLight does not switch on until presence is detected.
The lights will switch on when movement is detected from any direction.
rosnesrosnesrosnes sevalssevalssevalssevals
After the stand-by period, the whole group of lights will switch off automatically.
rosnesrosnesrosnes sevalssevalssevalssevals
rosnesrosnesrosnes sevalssevalssevalssevals
Light will switch on when movement is detected and/or if natural light is insufficient. The sensor will adjust brightness levels according to natural light while the room is occupied.
Daylight Harvesting
Light will switch off if natural light is sufficient; and then also dim to the selected minimum level when the room isn’t occupied, switching off when the selected standby period has passed.
Corridor Function
Microwave On/Off Sensor
Daylight harvesting and corridor function sensor
Microwave On/Off Sensor
Available VariantsLOWBAY 12050K-DH & LOWBAY 8050K-DH Daylight Harvesting
LOWBAY 12050K-CF & LOWBAY 8050K-CF Corridor Function
LOWBAY 12050K-MS & LOWBAY 8050K-MS Microwave On/Off Sensor
LOWBAY 1250K-EP10 & LOWBAY 8050K-EP10 10W 3Hr Emergency Light ConversionEP10CU ~ Emergency Kit
83
Optional Dali or 1~10V dimming.
The GENESIS2, IP65 Highbay range offers Lumen packages up to 37500Lm.
Easy single point mounting for ease of installation combined with
110° light distribution for simple retrofit in
existing installs.
GENESIS2 LED HIGHBAY
GENESIS2 Mechanical
Part Code GEN2-16500 GEN2-22500 GEN2-37500Fitting Colour Black Black BlackLumen Output 16500lm 22500lm 37500lmInput Voltage 220-240V 220-240V 220-240VPower 150W 200W 300WIP IP65 IP65 IP65CRI >82 >82 >82Efficacy 110lm/W 112lm/W 125lm/WWorking Temperature -35°C ~ +50°C 35°C ~ +50°C 35°C ~ +50°CBeam Angle 110° 110° 110°Colour 5000K 5000K 5000KWeight 5.41kg 5.8Kg 6.5KgDimensions 320 x 268mm 320 x 278mm 320 x 297mm
�320mm
268/
278/
297m
m
Industrial LED Lighting -GENESIS2
RATED
IP65
Product Features• IP65 rated LED Highbay Luminaire
• High system efficacy >110lm/W
• Instant start with no flickering
• Energy saving & low maintenance costs
• Long life ~ up to 50k hours
• Adjustable bracket
• Passive cooling for optimum thermal management
• 5 years warranty
• High efficiency using Philips LumiLEDS LED chip and reflector system
300 WATTS200 WATTS150 WATTS BEAM ANGLE
110°
DIMMABLE
DIMMABLE
GEN2-16500 Luminance Distribution
Optional Aluminium 90° Cover and Wire Guard
GEN2-22500 Luminance Distribution GEN2-37500 Luminance Distribution
Average Beam Angle (50%): 113.5 Deg
Flux out: 18031lm
1m 2420,8286lx 305.45cm
2m 151.3,517.0lx 1221.81cm
3m 37.82,129.5lx 2443.61cm
4m 16.81,57.54lx 3665.42cm
5m 9.455,32.37lx 4887.23cm
Height E ave, Emax Angle: 113.57 deg Diameter
-/+180 120
90
60
300-30
-60
-90
-120
0
1700
3400
5100
6800
8500
Average Beam Angle (50%): 112.5 Deg
Flux out: 12241lm
1m 1707,5721lx 298.30cm
2m 106.7,357.5lx 1193.20cm
3m 26.67,89.38lx 2386.40cm
4m 11.85,39.73lx 3579.60cm
5m 6.668,22.35lx 4772.80cm
Height E ave, Emax Angle: 112.32 deg Diameter
-/+180 120
90
60
300-30
-60
-90
-120
0
1200
2400
3600
4800
6000
Average Beam Angle (50%): 112.7 Deg
Flux out: 25360lm
1m 3536,11817lx 299.32cm
2m 884.1,2954lx 598.63cm
3m 392.9,1313lx 897.95cm
4m 221.0,738.6lx 1197.27cm
5m 141.5,472.7lx 1496.59cm
Height E ave, Emax Angle: 112.50 deg Diameter
-/+180 120
90
60
300-30
-60
-90
-120
0
3000
6000
9000
12000
15000
GENESIS2 LUMINANCE DISTRIBUTION
Aluminium Reflector
84 www.powerled.uk.com 0118 9408703 Product Catalogue 2017 Edition 1
85
GENESIS2 Optional Features
The GENESIS2 is available with a motion sensor switch as an optional extra. The motion sensor detects movement to turn on and turns off after a pre-selected hold-time, when there is no further movement. A daylight sensor is also incorporated to switch off the light when there is sufficient natural light.
Featuring the innovative Daylight Harvesting Sensor and CorridorFunction with our GENESIS2 range, controlling your application has become even easier. With the corridor function built in, it is automatically enabled with no additional commissioning effort required. Including a remote to control your functions for dimming and luminous output, users may choose between using pre-set lighting profiles for everyday use, or programming of custom light levels and sequences individually.
GENESIS2 Microwave Sensors ~ MS GENESIS2 Microwave Sensors ~ DH & CF
Light does not switch on until presence is detected.
The lights will switch on when movement is detected from any direction.
rosnesrosnesrosnes sevalssevalssevalssevals
After the stand-by period, the whole group of lights will switch off automatically.
rosnesrosnesrosnes sevalssevalssevalssevals
rosnesrosnesrosnes sevalssevalssevalssevals
Light will switch on when movement is detected and/or if natural light is insufficient. The sensor will adjust brightness levels according to natural light while the room is occupied.
Day Light Harvesting
Light will switch off if natural light is sufficient; and then also dim to the selected minimum level when the room isn’t occupied, switching off when the selected standby period has passed.
Corridor Function
Microwave On/Off SensorDaylight harvesting and corridor function sensor
AVAILABLE VARIANTS
GEN2-xxxx-DH Microwave Daylight Harvesting
GEN2-xxxx-CF Microwave Corridor Function
GEN2-xxxx-MS Microwave On/Off Sensor
GEN2-xxxx-EP10 10W 3Hr Emergency Light Conversion
EP10CU ~ Emergency Battery
XXXX = Lumens Example: GEN3L-23000-40x70-EP10
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 86
Product Features• Aluminium housing & Powder coated finish
• Instant start with no flickering
• Energy saving & low maintenance costs
• Luminous flux efficiency >110lm/W
• Long life ~ up to 50k hours
• Optional DALI, 1-10V dimmable LED driver
• Greater energy saving with optional microwave sensors
• Optional emergency pack
• High efficiency using Philips LumiLEDS LED chip
Suitable for installation in IP65 environments subject to moisture and dust, the GENESIS3L with aluminium housing, powder coated grey finish and polycarbonate lens, this series offers long operating lifetime with up to 23000 lumens and 80 ~ 200W power. Optional DALI 1 ~ 10V dimmable LED driver can be provided.
Industrial LED Lighting - GENESIS3L
GENESIS3L Mechanical
L
W
H
Product Features with
GENESIS3L LED HIGHBAYPart Code GEN3L-9400 GEN3L-14400 GEN3L-18300 GEN3L-23000Fitting Colour Grey Grey Grey GreyLumen Output 9420lm 14390lm 18360lm 22980lmLumens per circuit watt (±5%) 116lm/W 119lm/W 110lm/W 115lm/WInput Voltage 220-240V 220-240V 220-240V 220-240VPower frequency 50/60Hz 50/60Hz 50/60Hz 50/60HzPower Consumption 81W 121W 167W 200WCRI >82 >82 >82 >82IP IP65 IP65 IP65 IP65Working Temperature -20°C ~ +40°C -20°C ~ +40°C -20°C ~ +40°C -20°C ~ +40°CBeam Angles 90°/30°x70°/40°x130° 90°/30°x70°/40°x130° 90°/30°x70°/40°x130° 90°/30°x70°/40°x130°Colour 5000K 5000K 5000K 5000KWeight 4.1kg 5.2Kg 6.6Kg 7.8KgDimensions L627 x W126 x H97mm L923 x W126 x H97mm L1220 x W126 xH97mm L1516 x W126 x H97mm
RATED
IP65200 WATTS167 WATTS121 WATTS80 WATTS BEAM ANGLE 30° x 70° 40° x 130°
90°
Optional Dali or 1~10V dimming.
DIMMABLE
87
Lens Variants
90° 30°x 70° 40°x 130°
Microwave On/Off Sensor Daylight harvesting and corridor function sensor
GEN3L-xxxx-YY-DA DALi Dimming (not available on the 121W version)
GEN3L-xxxx-YY-1-10V 1~10V Dimming
GEN3L-xxxx-YY-MS Microwave On/Off Sensor
GEN3L-xxxx-YY-CF Microwave Corridor Function
GEN3L-xxxxYY-DH Microwave Daylight Harvesting
GEN3L-xxxx-YY-EM 3HR Emergency Light Conversion (External Fitting - Non IP Rated) (not available for 81W version)
XXXX = Lumens YY = Lens Example: GEN3L-23000-40x70-EP10
The GENESIS3L is available with a motion sensor switch as an optional extra. The motion sensor detects movement to turn on and turns off after a pre-selected hold-time, when there is no further movement. A daylight sensor is also incorporated to switch off the light when there is sufficient natural light.
GENESIS3L Microwave Sensors ~ DH & CF
Light does not switch on until presence is detected.
The lights will switch on when movement is detected from any direction.
rosnesrosnesrosnes sevalssevalssevalssevals
After the stand-by period, the whole group of lights will switch off automatically.
rosnesrosnesrosnes sevalssevalssevalssevals
rosnesrosnesrosnes sevalssevalssevalssevals
Day Light HarvestingDay Light Harvesting
GENESIS3L Optional Features
Featuring the innovative Daylight Harvesting Sensor and Corridor Function with our GENESIS3L range, controlling your application has become even easier. With the corridor function built in, it is automatically enabled with no additional commissioning effort required. Including a remote to control your functions for dimming and luminous output, users may choose between using pre-set lighting profiles for everyday use, or programming of custom light levels and sequences individually.
GENESIS3L Microwave Sensors ~ MS
Day Light Harvesting
Corridor Function
Light will switch on when movement is detected and/or if natural light is insufficient. The sensor will adjust brightness levels according to natural light while the room is occupied.
Light will switch off if natural light is sufficient; and then also dim to the selected minimum level when the room isn’t occupied, switching off when the selected standby period has passed.
AVAILABLE VARIANTS
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 88
Product Features• 120° light distribution
• Up to 120lm/W
• Ultra robust compact design
• IP20 ingress protected
• Excellent optical design
• Long service life
• Uses less power than flourescent alternatives
• Easy fix brackets for faster installation
TYRO LED BATTEN LIGHT
Part Code TYRO2-1250-4K TYRO4-2250-4K TYRO5-3750-4K TYRO6-4000-4KLumen Output 1250lm 2250lm 3750lm 4000lmPower 10W 18W 30W 32WPower Factor >0.95 >0.95 >0.95 >0.95CRI >80 >80 >80 >80Working Temperature -15°C ~ +50°C -15°C ~ +50°C -15°C ~ +50°C -15°C ~ +50°CBeam Angle 120° 120° 120° 120°Colour 4000K 4000K 4000K 4000KWeight 0.5Kg 0.88Kg 1.08Kg 1.18KgDimensions 600 x 50 x 55mm 1200 x 50 x 55mm 1500 x 50 x 55mm 1800 x 50 x 55mm
EMERGENCY OPTIONS
TYRO4-2250-4K-EM Emergency
TYRO5-3750-4K-EM Emergency
TYRO6-4000-4K-EM Emergency
TYRO2-1250-4K ~ Emergency not available
RATED
IP20
TYRO is a RoHS compliant LED Batten offering energy saving, efficiency and quality light in several sizes.
Industrial LED Lighting - TYRO LED Slim Batten
Product Features• 120° light distribution
• Up to 120lm/W
ndustrial LED Lightingndustrial LED Lightingndustrial LED Lightingndustrial LED Lightingndustrial LED Lighting - TYRO - TYRO - TYRO - TYRO - TYRO LED Slim BattenLED Slim BattenLED Slim Batten
NEW!
10-32 WATTS
1250-4000LUMENS
EEMERGENCYBEAM ANGLE
120°
89
TYRO Mechanical
TYRO Luminance Distribution
LED Lighting Energy Savings CalculatorSwitching from standard incandescent or energy saving bulbs to LED lighting can save on your energy usage and in turn energy costs.
Use our LED lighting energy saving calculator which can be found on our website:
www.powerled.uk.com/about/led-energy-savings-calculator
Enter your own values into the grey boxes and select the corresponding PowerLed product to calculate the energy savings you could make by switching.
600mm
55
R18
50 55
1500mm
1200mm
1800mm
Average Beam Angle (50%): 107.0 Deg
1m 174.9, 550.0lx 277.78cm
2m 43.74, 137.5lx 555.56cm
3m 19.44, 61.11lx 833.35cm
4m 10.93, 34.38lx 1111.13cm
5m 6.998, 22.00lx 1388.91cm
Height E ave, Emax Angle: 107.08deg Diameter
-/+180 120
90
60
300-30
-60
-90
-120
0
200
400
600
800
1000
£
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 90
The IP65 rated REVO-IP LED Batten Light is suitable for shops, warehouses, stores, corridors, garages and workshop amenity areas. It’s ultra robust and compact design has a 120° beam angle giving up to 6850 lumens.
REVO-IP LED Batten Light
Industrial LED Lighting - REVO-IP LED Batten Light
Product Features
Light is suitable for shops, warehouses,
robust and compact design has a 120° s.
• 120° Light distribution
• Up to 118Lm/W
• Ultra robust aluminium design
• IP65 Ingress protected
• Excellent optical design
• Long service life
• Uses less power than fluorescent alternatives
• 3 hour emergency option available
• Easy fix brackets for faster installation
E
RATED
IP6522-60 WATTS
Part Code RV2-IP-2600-4K RV4-IP-4625-4K RV5-IP-6850-4K Fitting Colour Aluminium & Grey Aluminium & Grey Aluminium & GreyLumen Output 2600lm 4625lm 6850lmInput Voltage 90 ~ 277VAC 90 ~ 277VAC 90 ~ 277VAC Power 22W 40W 60W Power Factor >0.95 >0.95 >0.95CRI >80% >80% >80% Beam Angle 120° 120° 120°Impact Protection IK10 IK10 IK10 Working Temperature -15 ~ +50°C -15 ~ +50°C -15 ~ +50°C Colour 4000K 4000K 4000KDimensions 600 x 85 x 74mm 1200 x 85 x 74mm 1500 x 85 x 74mm
2600-6850LUMENS EMERGENCY
E
RV2-IP-2600-4K-EM Emergency
RV4-IP-4625-4K-EM Emergency
RV5-IP-6850-4K-EM Emergency
EMERGENCY OPTIONS
PROTECTION
IK10 IMPACT
BEAM ANGLE
120°
91
600mm 85mm
74m
m
1200mm
1500mm
REVO-IP LED Batten Light Mechancial
REVO-IP Luminance Distribution
Average Beam Angle (1 1/20): 115.9° Deg
-/+180 120
90
60
300-30
-60
-90
-120
0
120
240
360
480
600
1m 174.9, 550.0lx 277.78cm
2m 43.74, 137.5lx 555.56cm
3m 19.44, 61.11lx 833.35cm
4m 10.93, 34.38lx 1111.13cm
5m 6.998, 22.00lx 1388.91cm
Height E ave, Emax Angle: 108.49deg Diameter4000k
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 92
Product Features• Suitable for security & general outdoor lighting applications
• Industrial design embedding user convenience and flexibility
• Ideal to fit at high-level with ease of installation & low maintenance fit and forget applications
• Cast metal casing with high grained anodised paint finish; environmentally protected against UV
• Quality, long life Epistar LEDs & polished reflector for maximum light output
• Designed to provide long product life cycle and high energy saving capabilities
• Proven provider of switch-mode power supplies to support in-house LED driver technology for the FLEX
• FLEX is offered with optional external PIR available with motion detector & automatic day/night sensor functionality
• 50k hours life time
FLEX
BLADE
BERM
STREET & PATHFINDER
Our versatile range of outdoor LED lights are suitable for many external applications. Starting with our robust LED FLEX floodlight which can be used for architectural, security, commercial and industrial environments. Our range includes the FLEX and BLADE LED floodlight, STREET and PATHFINDER and a new addition the BERM LED wall pack. All of which are ideal for outdoor applications as they are energy saving, provide improved quality of light, and have a longer lifespan than conventional lighting technologies, therefore providing considerable savings in maintenance costs.
Outdoor LED Lighting
93
Part Code FLEX-10C FLEX-10W FLEX-30C FLEX-30WLumen Output 750lm 750lm 2250lm 2250lmInput Voltage 100 ~ 240VAC 100 ~ 240VAC 100 ~ 240VAC 100 ~ 240VACInput Frequency 50/60Hz 50/60Hz 50/60Hz 50/60HzPower Consumption 10W 10W 30W 30WPower Factor >0.90 >0.90 >0.90 >0.90CRI 70 70 70 70Efficacy 75lm/W 75lm/W 75lm/W 75lm/W IP IP65 IP65 IP65 IP65Beam Angle 90° 90° 90° 90°Colour 5000 ~ 6500K 3000 ~ 3500K 5000 ~ 6500K 3000 ~ 3500K Dimensions 167 x 143 x 53mm 167 x 143 x 53mm 247 x 202 x 74mm 247 x 202 x 74mm
FLEX 10W & 30W FLOODLIGHTS
193m
m
Ø 7.30mm
16m
m
167m
m
270º Transition
149mm
143mm
53mm
276m
m
Ø13mm
25m
m
247m
m
270º Transition
204mm
202mm
74mm
FLEX 10 Mechanical FLEX 30 Mechanical
30 WATTS10 WATTS RATED
750 2250LUMENS LUMENS
IP65
Outdoor LED Lighting - FLEX LED Floodlight
This range of FLEX LED floodlights is suitable for use in domestic, commercial and industrial lighting applications including security lighting, general exterior lighting and high level, low maintenance fit and forget applications.
93
LED floodlights is suitable for use in domestic, commercial and industrial lighting applications including security lighting, general exterior lighting and high level, low maintenance fit and forget applications.
BEAM ANGLE
90°
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 94
Part Code FLEX-50C FLEX-50W FLEX-80CS FLEX-80WSLumen Output 3750lm 3750lm 6500lm 6500lmInput Voltage 100 ~ 240VAC 100 ~ 240VAC 90 ~ 305VAC 90 ~ 305VACInput Frequency 50/60Hz 50/60Hz 47/63Hz 47/63HzPower Consumption 50W 50W 80W 80WPower Factor >0.90 >0.90 >0.92 >0.92CRI 70 70 80 80Efficacy 75lm/W 75lm/W 81lm/W 81lm/W IP IP65 IP65 IP65 IP65Beam Angle 90° 90° 90° 90°Colour 5000 ~ 6500K 3000 ~ 3500K 6000 ~ 7000K 2900 ~ 3200K Dimensions 287 x 232 x 80mm 287 x 232 x 80mm 332 x 358 x 104mm 332 x 358 x 104mm
FLEX 50W & 80W FLOODLIGHTS
With FLEX, you’re investing in a new level of build quality, world class components and reliability. These products have been precision engineered to deliver the lowest cost and highest efficiency solution you can demand as a real professional.
318m
m
Ø 13mm
25m
m
287m
m
270º Transition
236mm
232mm
80mm
405m
m
Ø11mm
38m
m
358m
m
270º Transition
304mm
332mm
104mm
FLEX 50 Mechanical FLEX 80 Mechanical
80 WATTS50 WATTS RATED
3750 6500LUMENS LUMENS
IP65BEAM ANGLE
90°
Part Code FLEX-100C FLEX-100W FLEX-120C FLEX-120WLumen Output 7700lm 7700lm 9240lm 9240lmInput Voltage 90 ~ 264VAC 90 ~ 264VAC 90 ~ 264VAC 90 ~ 264VACInput Frequency 47/63Hz 47/63Hz 47/63Hz 47/63HzPower Consumption 100W 100W 120W 120WPower Factor >0.98 >0.98 >0.98 >0.98CRI 80 80 80 80Efficacy 77lm/W 77lm/W 77lm/W 77lm/W IP IP65 IP65 IP65 IP65Beam Angle 90° 90° 90° 90°Colour 6000 ~ 7000K 2900 ~ 3200K 6000 ~ 7000K 2900 ~ 3200K Dimensions 420 x 420 x 130mm 420 x 420 x 130mm 420 x 420 x 130mm 420 x 420 x 130mm
FLEX 100W & 120W FLOODLIGHTS
480m
m
Ø13mm
43m
m
420m
m
270º Transition
360mm
420mm
130mm
FLEX 100 & FLEX 120 Mechanical
Integral Dusk to Dawn option available
Approved external PIR available (PIR700)
Special colour powder coat finishes
Optional Features Key
120 WATTS100 WATTS RATED
7700 9240LUMENS LUMENS
IP65
95
PIR700 Sensorfor LEDlighting
FLEX ACCESSORY
See page 107 for more information.
BEAM ANGLE
90°
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 96
Part Code FLEX-200C FLEX-200W FLEX-240C FLEX-240WLumen Output 18000lm 18000lm 20500lm 20500lmInput Voltage 180 ~ 265VAC 180 ~ 265VAC 90 ~ 305VAC 90 ~ 305VACInput Frequency 47/63Hz 47/63Hz 47/63Hz 47/63HzPower 200W 200W 240W 240WPower Factor >0.96 >0.96 >0.97 >0.97CRI 80 80 80 80Efficacy >85lm/W >85lm/W >83lm/W >83lm/W IP IP65 IP65 IP65 IP65Beam Angle 120° 120° 120° 120°Colour 6000 ~ 7000K 2900 ~ 3200K 6000 ~ 7000K 3000 ~ 4000K Dimensions 515 x 467 x 150mm 515 x 467 x 150mm 515 x 467 x 150mm 515 x 467 x 150mm
FLEX 200W & 240W FLOODLIGHTS
620m
m
Ø15mm
60m
m
515m
m
270º Transition
480mm
467mm
150mm
FLEX 200 & FLEX 240
This FLEX LED Floodlight is also available with shatterproof clear polycarbonate and perspex lenses for applications where our standard glass version would not be suitable, such as food or crop storage; and are available for 30W, 50W, 80W, 100W, 120W, 200W & 240W Flex floodlights.
Optional Lenses
240 WATTS200 WATTS RATED
1800 20500LUMENS LUMENS
IP65BEAM ANGLE
120°
97
418.96cm
837.92cm
1256.88cm
1675.85cm
2094.81cm
2m
4m
6m
8m
10m
34.93,73.681lx
8.732, 18.421lx
3.881, 8.1871lx
2.183, 4.6051lx
1.397, 2.9471lx
ww467.44cm
934.89
1402.33cm
1869.77cm
2337.22cm
2m
4m
6m
8m
10m
167.6,397.41lx
41.91, 99.361lx
18.63, 44.161lx
10.48, 24.841lx
6.706, 15.901lx
455.41cm
910.81cm
1366.22cm
1821.62cm
2277.03cm
2m
4m
6m
8m
10m
90.94,210.11lx
22.74, 52.521lx
10.10, 23.341lx
3.638, 8.4031lx
5.684, 13.131lx
ww208.50cm
416.99cm
625.49cm
833.98cm
1042.48cm
1m
2m
3m
4m
5m
1291,3003lx
322.9, 750.8lx
143.5, 333.7lx
80.71, 187.7lx
51.66, 120.1lx
ww188.02cm
376.04cm
564.07cm
752.09cm
940.11cm
1m
2m
3m
4m
5m
1625, 35761lx
406.3, 893.9lx
180.6, 397.3lx
65.02, 143.0lx
101.6, 223lx
ww380cm
760cm
1141cm
1521cm
1901cm
2m
4m
6m
8m
10m
2207.2lx
551.8lx
245.2lx
137.9lx
88.3lx
ww184.21cm
368.42cm
552.076cm
736.85cm
921.06cm
1m
2m
3m
4m
5m
1625, 35761lx
470.8, 1030lx
209.2, 457.6lx
117.7, 257.4lx
75,33, 164.7lx
ww368cm
735cm
1103cm
1471cm
1838cm
2m
4m
6m
8m
10m
2569.8lx
642.5lx
285.5lx
160.6lx
102.8lx
FLEX 10W FLEX 50WFLEX 30W
FLEX 80W FLEX 100W
FLEX 200W
FLEX 120W
FLEX 240W
FLEX FLOODLIGHT LUMINANCE DISTRIBUTION
Integral Dusk to Dawn option available
Approved external PIR available (PIR700)
Special colour powder coat finishes
Optional Features Key
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 98
Optional Product Features• Integral Dusk to Dawn sensor
• Shatterproof polycarbonate lens for applications such as food stores where glass is unsuitable (Lighting BSI/IEC 61549 Standard)
• The LED ready PIR700 outdoor sensor will compliment your Flex floodlight installation.
FLEX Floodlight Optional Features
DD Suffix - Integral Dusk to Dawn Sensor
This optional Dusk to Dawn sensor will ensure your FLEX floodlight automatically switches on at dusk and off again at dawn; lighting your outdoor space only during the hours of need.
PCL Suffix - Optional Lens
CLEAR POLYCARBONATE LENS
COLOURED PERSPEX LENS
The FLEX LED Floodlight is available with shatterproof clear polycarbonate lens for applications where our standard glass version would not be suitable, such as food or crop storage; and are available for 30W, 50W, 80W, 100W, 120W, 200W & 240W Flex floodlights.
These coloured perspex lenses offer a constant trans-lucent colour and are available for 30W, 50W, 80W, 100W, 120W, 200W & 240W Flex floodlights.
Clear Polycarbonate LensPCL00 Clear Polycarbonate 00=30W, 50W, 80W, 100W, 120W, 200W & 240W
Coloured Perspex LensPCL00-B Blue Perspex 00=30W, 50W, 80W, 100W, 120W, 200W & 240WPCL00-G Green Perspex 00=30W, 50W, 80W, 100W, 120W, 200W & 240WPCL00R Red Perspex 00=30W, 50W, 80W, 100W, 120W, 200W & 240W
These coloured perspex lenses offer a constant translucent colour and are available for 30W, 50W, 80W, 100W, 120W, 200W & 240W Flex floodlights.
Coloured Perspex Lens
99
PIR700 Sensorfor LEDlighting
Special Colour Powder Coat FinishesThe FLEX range is also available in a range of colour powder coat finishes; and are available for the 30W, 50W, 80W, 100W, 120W, 200W & 240W.
Our custom colour paint service is available across almost all sizes of the FLEX floodlight range and now allows you to match or compliment your environment without compromise. Simply choose your choice of pantone or RAL colour and we will do the rest without any noticeable delay in delivery.
RAL 9016M Traffic White RAL 7016M Anthracite Grey RAL 6005M Moss GreenBS 08 B 29M Vandyke Brown
Other special colours are available on request.
FLEX Floodlight Optional Features
Our custom colour paint service is available across almost all sizes of the FLEX floodlight range and now
AVAILABLE COLOURS
FLEX ACCESSORY
See page 107 for more information.
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 100
BLADE 150 - 300W FLOODLIGHTS
Part Code BLADE150-16000 BLADE200-23000 BLADE240-26500 BLADE300-32200Fitting Colour Black Black Black BlackLumen Output 16000lm 23400lm 26500lm 32200lmInput Voltage 220 ~ 240V 220 ~ 240V 220 ~ 240V 220 ~ 240VPower 150W 200W 240W 300WPower Factor >0.95 >0.95 >0.95 >0.95Output Power 2400mA +60Vdc 3200mA +60Vdc 3600mA +60Vdc 5950mA +60VdcCRI >80 >80 >80 >80Efficacy (lm/W) 106lm/W 117lm/W 110lm/W 107lm/WIP IP65 IP65 IP65 IP65Beam Angle 110° 110° 110° 110°Colour 4750 ~ 5250K 4750 ~ 5250K 4750 ~ 5250K 4750 ~ 5250KWeight 7.5kg 7.8Kg 7.8Kg 8.9KgDimensions 411 x 319 x 90mm 411 x 319 x 90mm 411 x 319 x 90mm 411 x 319 x 90mm
Product Features• High quality SMD LED array
• Custom case for effective heat dissipation
• In house LED driver technology
• Rugged design
• IP65
• 5 years warranty
• Using Philips LUMILEDS LED chip
RATED
16000 2650023400 32200LUMENS LUMENSLUMENS LUMENS
IP65
Outdoor LED Lighting -BLADE LED Floodlight
BLADE Mechanical BLADE Luminance Distribution
Ø 12.5mm
38m
m
180º Transition
319mm
348mm
152mm
411m
m
471m
m
90mm
Average Beam Angle (50%): 110.8° Deg
-/+180 120
90
60
300-30
-60
-90
-120
0
3600
1800
5400
7200
9000
Flux out: 17939lm
1m 2800, 8738lx 284.62cm
2m 699.9, 2185lx 569.25cm
3m 311.1, 970.9lx 853.87cm
4m 175.0, 546.1lx 1138.49cm
5m 112.0, 349.5lx 1423.11cm
Height E ave, Emax Angle: 109.81 deg Diameter
BLADE LED floodlights are RoHS compliant, professional lighting products incorporating several outputs and sizes to suit many applications.
150-300 WATTS BEAM ANGLE
110°
101
3400LUMENS
Ideal for outdoor environments this 40W wall pack light offers 3400 lumens with an IP65 rating. Designed with a robust die cast aluminium and ABS plastic case with an opal diffuser.
BERM SPECIFICATIONPart Code BERM40-4KInput Voltage 90 ~ 277VACLumen Output 3400lmPower 40WPower Factor >0.95Working Temperature -15°C ~ +50°CCRI 80IP IP65Beam Angle 120°Colour 4000KWeight 2.7KgDimensions 265 x 308 x 182mm
Product Features• Die Cast Aluminium & ABS Plastic
• Photo Cell Incorporated
• IP65
• Energy Efficient
• 3400lm output through opal diffuser
265mm
308m
m
182mm
C0/180, 145.7 Deg
Flux out: 1256lm
1m 197.2, 569.1lx 272.05cm
2m 49.29, 142.3lx 544.11cm
3m 21.91, 63.23lx 816.16cm
4m 12.32, 35.57lx 1088.21cm
5m 7.886, 22.76lx 1360.26cm
Height E ave, Emax Angle: 107.36deg Diameter
-/+180 120
90
60
300-30
-60
-90
-120
150
300
450
750
3000k/4000k/5000K/6000K
600
C90/270, 107.4 Deg
0
Outdoor LED Lighting - BERM LED Wall Pack
BERM Mechanical BERM Luminance Distribution
40 WATTS RATED
IP65BEAM ANGLE
120°
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 102
Product Features• Energy saving, low maintenance
• IP65 Rated for external applications
• System design integrating power, driver and LED light modules
• LED life of 50K hours
• Easy installation & low maintenance
• 80% cost saving compared to incandescent bulbs pathfinder series
LED STREET lights offering high quality LED power solutions enable significant energy and carbon reductions.
Outdoor LED Lighting - STREET & PATHFINDER
103
Part Code STREET90 STREET140 STREET200Lumen Output 8100lm 12600lm 18000lmInput Voltage 120 ~ 277VAC 120 ~ 277VAC 120 ~ 277VACPower 90W 140W 200WPower Factor 0.95 0.95 0.95 LED Input Current 350mA 350mA 350mAEfficacy 90lm/W 90lm/W 180lm/WCRI 70 70 90IP IP65 IP65 IP65Colour 5000K 5000K 5000KOperating Temperature -20 ~ +50°C -20 ~ +50°C -20 ~ +50°CDimensions 709 x 313 x 115mm 877 x 313 x 115mm 1045 x 313 x 115mm
STREET HIGH LUMEN STREET LIGHTING FIXTURE
1045mm
115
313mm
877mm
115
709mm
115
STREET Light
STREET200STREET90 STREET140
100
300
400
500
600
700
0
200
100
300
400
500
600
700
0
200
100
300
400
500
600
700
0
200
STREET90 STREET140 STREET200
STREET Luminance Distribution
18000126008100LUMENSLUMENSLUMENS90-200 WATTS RATED
IP65
Part Code PATHFINDER30 PATHFINDER70Lumen Output 3300lm 7700lmInput Voltage 220 ~ 240VAC 220 ~ 240VACPower 30W 70WPower Factor 0.9 0.9Efficacy 110lm/W 110lm/W CRI 70 70IP IP65 IP65Colour 5000K 5000KOperating Temperature -40 ~ +50°C -40 ~ +50°CDimensions 465 x 222 x 122mm 465 x 222 x 122mm
PATHFINDER High Lumen Street Lighting Fixture
390mm
222m
m
222m
m
214m
m122m
m
465mm
PATHFINDER30 ~ PATHFINDER70
Outdoor LED Lighting - PATHFINDER
100
300
400
500
200
0
100
300
400
500
0
200
PATHFINDER30 PATHFINDER70
PATHFINDER Luminance Distribution
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 104
77003300LUMENSLUMENS70 WATTS30 WATTS RATED
IP65
105
Evolution of Light
All things have to move on; FLEX has served us well over the last 6 years but the needs of our customers and the high power floodlight market have evolved and so has our offering.
BLADE, developed to fulfil the evolving requirements of the 150W to 300W LED floodlight market, has an easier to fit small light weight cast aluminium case that is IK08 impact tested for robustness. The light output has also been improved by incorporating an LED array for higher lumen output, higher efficacy, better thermal characteristics and generally improved photometrics. All of these attributes lead to BLADE offering an increased 5 year warranty.
Lighting Accessories
PIR700
EMPACK2T Kit
EMPACK2 Emergency Kit
EP3KIT
EP10 Emergency Components
L2 Bezel
ICON Waterproof Connectors
Solderless Connectors for LED StripProduct Catalogue 2017 Edition 1
www.powerled.uk.com 0118 9408703 106
To further ensure the quality of your install we have developed a range of accessories for use with our LED fixtures, from LED strip solderless connectors, waterproof connectors and junction boxes to emergency lighting kits for our luminaires.
107
Product Features• Designed for LED loads of up to 300W
• 180° coverage with up to 12 metres detection
• Adjustable time delay
• Adjustable ambient light level
• Prismatic lens ensures high sensitivity for accurate motion detection
• Automatically adjusts to temperature changes keeping sensitivity and coverage consistent
• Built in surge protection
• IP44 rated; suitable for interior or exterior use
Lighting Accessories - PIR700 Wall Mount Outdoor PIR Sensor
PIR700 WALL MOUNT OUTDOOR PIR SENSOR
Part Code PIR700B PIR700WFitting Colour Black WhiteInput Voltage 220 ~ 240VAC, 50Hz 220 ~ 240VAC, 50HzMaximum Wattage 0~300 watt LED load, 300 Watt CFL, 1200 Filament 0~300 watt LED load, 300 Watt CFL, 1200 FilamentSensing Technology Passive Infrared (PIR) Passive Infrared (PIR)Time Delay Setting 10 seconds ( +/-3) to 7 minutes (+/-2 Mins) 10 seconds ( +/-3) to 7 minutes (+/-2 Mins) Mounting Wall WallLight Level Setting 3 ~ 2000 lux 3 ~ 2000 luxEnvironment IP44 rated, -20°C to +40°C IP44 rated, -20°C to +40°CCoverage 180°, up to 12m (<24°C) 180°, up to 12m (<24°C) Recommended Mounting Height 1.8 ~ 2.50M 1.8 ~ 2.50M Sensors Infrared pyroelectric detectors Infrared pyroelectric detectorsLens Design prismatic prismaticDetection speed 0.6 ~ 1.5m/s 0.6 ~ 1.5m/sDetection Range 0 ~ 12 metres 0 ~ 12 metresDimensions 72.7 x 104 x 82.5mm 72.7 x 104 x 82.5mm
PIR700 Sensors can be used with the FLEX Floodlights - page 93.
The PIR700 external motion sensor from PowerLed is a PIR sensor specifically suited to the control of LED lighting technology. With its advanced lighting control circuits, PIR700 ensures that LED floodlights are controlled safely and reliably.
Double sensor technology utilises heat sensing and movement detection meaning it is suitable for both pedestrian and vehicular monitoring. Our special lens design means that over 300 sensor zones are continuously monitored. Throughout the design, special focus has been placed on eliminating nuisance tripping and false illumination, common problems associated with lower quality PIRs. The PIR700 is ideally suited to vertical mounting, while the IP44 enclosure ensures trouble free operation in some external and all internal environments.
has been placed on eliminating nuisance
0-300 WATTS RATED
IP44SENSITIVITY 180° RANGE 12M DETECTION
82.5
mm
104.0mm
72.7mm
PIR-700 Mechanical
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 108
Product Features• Designed to be fitted with the L2 Series
• 3 hours of emergency lighting
• LED charge status display
• Test switch with self test function
• Intelligent automatic recharging function
• Ceiling mount LED module
Lighting Accessories -EMPACK2T Kit
LED emergency light pack designed to provide 3 hours of emergency lighting when fully charged.
EMPACK2T 2W Non-Maintained LED Emergency Lighting Kit
BATTERY ~ EMBATT2
LED LAMP
DRIVERPart Code EMDRIVER2Input Voltage 220 ~ 240VACInput Frequency 50 ~ 60HzInput Current 30mAInput Power 2WOperating Temperature -25°C to +50°CMax. Case Temperature 70°CInput Connections AC CableOutput Connections Push fit connectorsDimensions 115 x 50 x 30mm
Battery Type Ni-CdBattery Voltage 4.8VBattery Capacity 1.5AhCharge Current 230mARecharge Time 12HrsWeight 190gDimensions 88 x 45 x 23mm
LED Current 600mALED Power 1.8WLED Colour 6500KLumen 180lmCRI 72MTBF 30,000K hours full load 25°CWeight 40gDimensions 105 x 40 x 10mmLED Fixing Adhesive Pad
50m
m
1100mm
30m
m
90mm
115mm
86±1 200±5
RED (+)UL:3135AWG#18
6 MDLEX-5557-2P+
BLACK (-)
45.5±1
23.5mm
EMDRIVER2
EMBATT2
EMPACK2T is a 2W constant current non-maintained LED emergency light system designed to be fitted with the L2 series of LED light tiles. Capable of providing 3 hours of emergency lighting when fully charged; with charge status LED, the L2 has a test switch with self test function and intelligent automatic charging function. The unit allows for a fit and forget application. Kit includes a power supply, battery pack, 3 x interconnecting cables, green test switch PCB and LED lamp PCB.
2 WATTSEMERGENCY
E
109
Product Features• Constant Current mode
• 3 hour emergency operation
• LED charge status display
• Test switch with self test function
• Intelligent automatic recharging function
• Complete with AC cable
• Easy Installation
• Ceiling mount LED module
EMPACK2 is a 2W constant current non-maintained LED emergency light system capable of providing 3 hours of emergency lighting when fully charged. Kit includes a power supply, battery pack, 300mm connecting wire and 1 LED Lamp.
Lighting Accessories - EMPACK2 Emergency Kit
EMPACK2 2W Non-Maintained LED Emergency Lighting Kit
BATTERY ~ EMBATT1.5AH
LED LAMP ~ EM2W
Part Code EMDRIVER2Input Voltage 220 ~ 240VACInput Frequency 50 ~ 60HzInput Current 30mAInput Power 2WOperating Temperature -25°C to +50°CMax. Case Temperature 70°CInput Connections AC CableOutput Connections Push fit connectorsDimensions 115 x 50 x 30mm
Battery Type Ni-CdBattery Voltage 4.8VBattery Capacity 1.5AhCharge Current 230mARecharge Time 12HrsWeight 190gDimensions 88 x 45 x 23mm
LED Current 600mALED Power 1.8WLED Colour 6500KLumen 180lmCRI 72MTBF 30,000K hours full load 25°CWeight 40gDimensions 100 x 25mmLED Fixing Centre 90mm
50m
m
1100mm
30m
m
90mm
115mm
86±1 200±5
RED (+)UL:3135AWG#18
6 MDLEX-5557-2P+
BLACK (-)
45.5±1
23.5mm
EMDRIVER2
EMBATT1.5AH
100mm
25m
m
90mm
LED LAMP ~ EM2W
Suitable for applications in hotels, restaurants, offices, schools, hospitals and supermarkets.
DRIVER 2 WATTSEMERGENCY
E
www.powerled.uk.com 0118 9408703 110
EP3KIT
The EP3 Emergency lighting kit is suitable for led luminaries requiring up to 400mA or with a maximum forward voltage of 60Vdc. Supplied with an integral no maintenance Ni-Cad battery, the complete assembly is designed to replace the existing LED driver and convert any suitable light fitting into an emergency light.
Part Code EP3KITVoltage 220 ~ 240VACFrequency 50 ~ 60 HzPower 4WCurrent 40mAPower Factor 0.5Charge Current (Typ.) 200mARecharge Hours 20hrs EM LED Current 400 ~ 40mA EM LED Voltage 6 ~ 60V (2-20 LEDs)EM LED Power 3.0WAmbient Temperature -25 ~ +50°CMax Casing Temperature 70°CBattery Type Ni-Cd 3.6V 4AhWeight 184g
Lighting Accessories - EP3KIT
Product Features• Intelligent automatic recharging function
• Automatic output current adjustment
• Constant current operation
• Wide 6-60V LED voltage range
• 3 hour emergency operation
• LED charge status display
• Deep discharge protection
• Test switch with self-test function
• Built-in compact design
• Suitable for LED luminaire with external driver
• Non-maintained LED emergency kit
• 3hr battery included in EP3 kit
Product Catalogue 2017 Edition 1
EMERGENCY
E
148 ± 2 250 ± 10
BLACK (-)
8 JST-VH-2P-RED (+)
UL:3135AWG#18
166 +2 -1.5
29.5 ±1 D-C 3000Mah 3.6V 24
188 ± 3
EP3 Emergency Battery
EP3KIT Wiring
AC to Luminaire Driver
CD-100-2MP
Black CableBlack Cable
Black Cable
Test Switch
Black+Red CableBlack+Red Cable
Black Cable
Battery Pack
E130H-2Male Connector
E030H-2Female Connector
2622-H-02 Male Connector 2621-H-02 Female Connector
CD-100/4FP Female Connector CD-100/4MP Male Connector
Switched andPermanantAC Input
EP3CU
CD-100-2FP
DC from Luminaire Driver
End User Connections
To Luminaire
LED IndicatorSwitched andPermanantAC Input
111
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 112
Lighting Accessories - EP10 Emergency Components
EP10CU
Part Code EP10CUVoltage 100 ~ 277VACFrequency 50 ~ 60 HzPower 5WCurrent 40mAPower Factor 0.5Charge Current (Typ.) 300mARecharge Hours 20hrs EM LED Current 500~80mA EM LED Voltage 6~60VEM LED Power 10WAmbient Temperature -25 ~ +50°CMax Casing Temperature 70°CBattery Type Ni-Cd 9.6V 4000 mAH (not included)Weight 184g
172mm
30m
m30
mm
172mm
2.25mm2.
25m
m
Our 10W EP10 components are suitable for LED luminaires with an external driver. Maintaining power during any mains failure, our innovative EP10CU and EP10BATT will take over and provide power for a three hour emergency operation in a constant current mode. With a built in compact design, the emergency battery incorporates a test switch with self test and an intelligent automatic recharging function. Status can be seen visually via an LED charge status display.
EP10CU
innovative EP10CU and EP10BATT will take over and provide power
function. Status can be seen visually via an LED charge status display.
EMERGENCY
E
113
Lighting Accessories - The L2 Bezel
110
20
20
613
613
50
5
The L2 Bezel is a white powder coated steel chassis for the backlit L2 tile allowing the LED tile to be installed in applications requiring surface mounting. This UK manufactured bezel is an affordable surface mount solution, available in any colour to suit any architectural requirement and is simple and quick to install.
L2 Bezel - LSMK1
The L2 Bezel is designed for easy surface mounting of the L2 Light Tile as on page 67.
Recommended battery - EP10BATT
EP10BATT
280mm
60mm
260mm
EP10BATT
Status Indication LEDTest Switch
TypeGreen LED Mounting hole 7mmMounting hole 6.5mm
400mm 400mm
EP10CU Test Switch
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 114
Product Features• Designed for use in areas requiring high ingress protection
• IP68 at 2 bar
• Wire Cable Specification ~ ∅ 5mm (min) / ∅ 14mm (max)
• Termination: Screw fitting
• 3 years warranty
ICON WATERPROOF JUNCTION BOX ~ WITH TERMINAL BLOCK 5 POLESPart Code ICON-BOXFitting Colour Black/ClearHousing Polyamide PA66, UL94-V0Sealing Gasket SiliconContact Copper, Nickel PlatedTechnical 250V, PTI 250, T85Dimensions 72 x 63 x 36mm (overall length ~ 130mm)
ICON-BOX
RATED
IP68
Lighting Accessories - ICON Waterproof Connectors
Designed for terminating LED connections; our range of IP68 ICON waterproof connectors enable easy, effective installation of LED lighting in areas requiring high ingress protection levels such as environments prone to moisture.
NEW!
ICON-BOX
72m
m36
mm
27m
m32
.5m
m
63mm
115
ICON WATERPROOF CONNECTOR ~ 3 WAY 3 ~ 5 POLE
ICON WATERPROOF CONNECTOR ~ 2 WAY
Part Code ICON-TEEFitting Colour BlackHousing Polyamide PA66, UL94-V0Sealing Gasket SiliconContact Copper, Nickel PlatedTechnical 250 ~ 450V, PTI 250, T85Dimensions 116.5 x 90mm
Part Code ICON-THRU ICON-THRU-3Fitting Colour Black BlackHousing Polyamide PA66, UL94-V0 Polyamide PA66, UL94-V0Sealing Gasket Silicon SiliconContact Copper, Nickel Plated Copper, Nickel PlatedTechnical 450V, PTI 250, T85 450V, PTI 250, T85Blocks 5 Pole 3 Pole Dimensions 116.5 x 32.5mm 81 x 24mm
32.5mm27
mm
116.5mm
116.5mm
27mm
90mm
ICON-THRU
ICON-THRU-3
ICON-THRU
81mm
24mm
ICON-THRU-3
ICON-THRU
ICON-TEE
RATED
RATED
IP68
IP68
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 116
Product Features• Quick, clean and easy way to join and terminate LED Flexible Strip
• Suitable for use with 8mm & 10mm PCBs
• Ideal for IP20 rated ; also suitable for IP65* Strip where PV coating has been removed from solder joints
• Tail cable, joining connector or wire connector for multiple configuration options
• Suitable for 3528, 5050 & 2835 single colour LED Strip
*To maintain IP65 water proof-ing, adequate sealing should be applied around the connections.
8W8-2 & 10W10-2 Wire to Wire Connectors
8C-2 & 10C-2 Joining Connectors
8C8-2 & 10C10-2 Tail Connectors
Lighting Accessories -Solderless Connectors for LED Strip
A wide variety of reliable, high-quality, solderless connectors to give you easy solutions for connecting LED Flexible Strips, or terminating cut ends. Connecting your LED Flexible Strip is now quick and easy without the need to solder.
117
8C-2 & 10C-2 SOLDERLESS JOINING CONNECTORS
8C8-2 & 10C10-2 SOLDERLESS TAIL CONNECTORS
Part Code 8C-2 10C-2Description 8mm pcb
joiningconnector 5 pcs per pack
10mm pcb joiningconnector 5 pcs per pack
8mm pcb tailconnector5 pcs per pack
10mm pcb tailconnector5 pcs per pack
8C-2 & 10C-2 Joining Connectors
8C8-2 & 10C10-2 Tail Connectors
Part Code 8C8-2 10C10-2Description
Designed in England ++
- - RoHS
+
-RoHS-RoHS
+
-
145mm
8mm/10mm4.6mm
Designed in England Designed in England+ +
--RoHSRoHS
+
-+
-
10C-2 Connector8C-2 Connector8mm 4.6mm 4.6mm10mm
++
- -+
-+
-
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 118
88-MP & 1010-MP SOLDERLESS CONNECTOR MULTI-PACKS
8W8-2 & 10W10-2 SOLDERLESS WIRE TO WIRE CONNECTORS
8mm pcb multi pack (3pcs)1 x each piece8mm connectors
10mm pcb multi pack (3pcs)1 x each piece10mm connectors
8W8-2 & 10W10-2 Wire to Wire Connectors
88-MP & 1010-MP Connector multi pack
Part Code 8W8-2 10W10-2Description
Part Code 88-MP 1010-MP
8mm pcb wire to wirejoiningconnector5 pcs per pack
10mm pcb wire to wirejoining connector5 pcs per pack
145mm
+ +
--RoHS
++
- - RoHS
8mm/10mm4.6mm
8C8-2 & 10C10-2 PCB Tail Connector (x 1 piece)
8C-2 & 10C-2 PCB Joining Connector (x 1 piece)
8W8-2 & 10W10-2 PCB Wire to wire Connector (x 1 piece)
119
CL1-P Clear Plastic Fixing Clips
Lighting Accessories -VHB Double Sided Adhesive Tape
Lighting Accessories -Clear Plastic Fixing Clips
Ideal for use with metal, glass, plastic, MDF and prepared timber. The double sided VHB acrylic foam tape provides strong, effective adhesion when installing your LED Flexible Strip. With a long term heat resistance up to 100°C, it also has excellent UV light resistance.
Clear plastic fixing clips are idealfor fitting 10mm LED Strip.
VHB DOUBLE SIDED ADHESIVE TAPE
Part Code VHB5MTape Colour WhiteRelease Tape Red Polyethylene FilmAdhesive Type Acrylic Foam180° Peel Adhesion to Steel 4.0kg/25mmTensile Strength 8kg/cm2Test Conditions 23°C ± 2/65% Relative HumidityHeat Resistance Short term 160°C100g static hanging weight for 10000 mins. Long term 100°CShelf Life 12 monthsThickness (ASTM D-1000) 0.4mmOperating Temperature 0°C ~ 40°CDimensions 5000 x 10mm
15mm
28mm
12mm
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 120
Are you aware of the different ways you can keep up to date with our communications?
Follow us on Facebook for informative articles on LED lighting and chances to win prizes.
Visit our website for:
Online catalogue, product listings, company news, insight on our research and development program, case studies and installations, legislation, information centre and support.
Keeping you informed
Follow us on Twitter@PowerLEDuk
Visit us atPowerLED.uk.com
Follow us on Facebook@PowerLEDUK
Follow us atPowerLed (UK) Ltd
www
121
Product Features• Each pack contains: 1metre Aluminium extrusion, 1 clear diffuser, 1 x opal diffuser, 4 x end caps, 6 x mounting clips
• Easily transportable 1 metre lengths
• High quality anodised aluminium
• Added thermal management of LEDs
• Clear & Opal diffuser in every pack for added choice
• Link them together to create endless installation ideas
• Steel clips for secure installation
EXT 1
EXT 5
EXT 9
EXT 2
EXT 6
EXT 10
EXT 3
EXT 7
EXT 11
EXT 4
EXT 8
Full OEM datasheet available on request.
Lighting Accessories -Extrusions
SURFACE MOUNTED FLEXIBLE STRIP EXTRUSION - EXT1
Part Code EXT1 What’s included: 1 Metre Aluminium Extrusion 1 x Clear Diffuser 1 x Opal Diffuser 4 x End Caps 6 x Mounting ClipsDimensions 1000 x 17.3 x 7mm
7mm
17.3mm
12.5mm
A versatile range of aluminium profiles packed in easy formats to enhance LED installations. Choose from surface and recessed mounts to angled profiles.
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 122
RECESSED MOUNTED FLEXIBLE STRIP EXTRUSION - EXT3
CORNER MOUNTED FLEXIBLE STRIP EXTRUSION - EXT4
RECESSED MOUNTED FLEXIBLE STRIP EXTRUSION - EXT5
CORNER MOUNTED FLEXIBLE STRIP EXTRUSION - EXT6
Part Code EXT3 What’s included: 1 Metre Aluminium Extrusion
1 x Clear Diffuser1 x Opal Diffuser4 x End Caps6 x Mounting Clips
Dimensions 1000 x 17.3 x 7mm
Part Code EXT4 What’s included: 1 Metre Aluminium Extrusion
1 x Clear Diffuser1 x Opal Diffuser4 x End Caps6 x Mounting Clips
Dimensions 1000 x 19 x 19mm
Part Code EXT5 What’s included: 1 Metre Aluminium Extrusion
1 x Clear Diffuser1 x Opal Diffuser4 x End Caps6 x Mounting Clips
Dimensions 1000 x 17.3 x 14.5mm
Part Code EXT6 What’s included: 1 Metre Aluminium Extrusion
1 x Clear Diffuser1 x Opal Diffuser4 x End Caps6 x Mounting Clips
Dimensions 1000 x 16 x 16mm
SURFACE MOUNTED FLEXIBLE STRIP EXTRUSION - EXT2
Part Code EXT2 What’s included: 1 Metre Aluminium Extrusion
1 x Clear Diffuser1 x Opal Diffuser4 x End Caps6 x Mounting Clips
Dimensions 1000 x 17.3 x 14.5mm
14.5
mm
17.3mm
12.5mm
7mm
17.3mm
12.5mm
19mm
11.2mm
19mm
19mm19mm
14.5
mm
17.3mm
25mm
12.5mm
16mm
10.75mm
9.55mm
17.2mm
SURFACE MOUNTED FLEXIBLE STRIP EXTRUSION - EXT8
RECESSED MOUNTED FLEXIBLE STRIP EXTRUSION - EXT9
RECESSED MOUNTED FLEXIBLE STRIP EXTRUSION - EXT10
RECESSED MOUNTED FLEXIBLE STRIP EXTRUSION - EXT11
Part Code EXT8 What’s included: 1 Metre Aluminium Extrusion 1 x Clear Diffuser 1 x Opal Diffuser 4 x End Caps 6 x Mounting ClipsDimensions 1000 x 56.7 x 8.47mm
Part Code EXT9 What’s included: 1 Metre Aluminium Extrusion 1 x Clear Diffuser 1 x Opal Diffuser
Dimensions 1000 x 21.3 x 25.9mm
Part Code EXT10 What’s included: 1 Metre Aluminium Extrusion 1 x Clear Diffuser 1 x Opal Diffuser 4 x End Caps 6 x Mounting ClipsDimensions 1000 x 55 x 75mm
Part Code EXT11 What’s included: 1 Metre Aluminium Extrusion 1 x Clear Diffuser 1 x Opal Diffuser 4 x End Caps 6 x Mounting ClipsDimensions 1000 x 55 x 32mm
SURFACE MOUNTED FLEXIBLE STRIP EXTRUSION - EXT7
Part Code EXT7 What’s included: 1 Metre Aluminium Extrusion 1 x Clear Diffuser 1 x Opal Diffuser 4 x End Caps 6 x Mounting ClipsDimensions 1000 x 29.7 x 29.7mm
29.7mm
20.55
mm
17.1mm
12.4mm
8.47
mm
56.7mm
25.9
mm
12.5mm
14.5mm
3mm
21.3mm
75m
m
29.41mm
55mm
51.6mm
36.3
5mm
32m
m
55mm
44mm
Note: This extrusion does not have end caps or clips.
123
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 124
• LDT or IES files available
• In house Lighting design service
• Compliance documentation
• Life and reliability data
• Failure analysis
• ROI information
• Custom/Bespoke ability
Professional products and services
PowerLed offer a professional service with lighting design assistance built into our service at no extra cost. We offer IES data for all our lighting products; these IES files contain photometric data suitable for lighting design applications like IES Viewer, Photometric Viewer, Relux and others. Our experts are available to assist with your lighting design, using our data, helping you select the most appropriate options and achieve the most effective lighting solutions available.
Quality management and CE certification: PowerLed operates to a Quality Management System that is BS-EN-ISO 9001:2008 certified; the Group has been certified since August 1997 and our aim is total customer satisfaction and continuous improvement.
We don’t just quote CE; we ensure our products meet the required European Directives and are suitable for movement within the EEA. We hold the required declarations to back up our markings and to support you should you need to qualify your end equipment.
PowerLed is committed to the excellence of its customer support, from the moment of initial enquiry and through the total life of its products. This is reflected in the enthusiasm and knowledge of both our sales and support teams, who will go all out to assist you via email, phone or fax as appropriate. With access to your account and pricing information, they can respond immediately to any questions concerning your pricing, stock holdings or account status. Our pledge of ‘total life’ service has driven the growth of our loyal, long-term customer base.
In house Lighting Design service
General Information
As a Group we are able to supply ECA compliance certification. The Enhanced Capital Allowance (ECA) is a government scheme encouraging businesses to invest in energy saving solutions that help reduce carbon emissions that contribute to climate change. Some energy efficient lighting products are eligible for full tax relief. Tax relief can be claimed on the purchase and installation costs of specific types of LED lighting and lighting controls.
125
IP20 rated ~ Protection from finger sized objects. (less than 12.5mm). No protection from water.
IP41 rated ~ Protected from granular foreign bodies >1mm. Protected against vertically dripping water.
IP44 rated ~ Protected from granular foreign bodies >1mm. Protected from water splashing against the enclosure from any direction.
IP65 rated ~ Limited ingress of dust, not in sufficient quantity to interfere with operation. Not designed for immersion or sitting in water. Protected from water projected from a nozzle against the enclosure from any direction.
IP67 rated ~ Limited ingress of dust, not in sufficient quantity to interfere with operation. Protected from ingress of water when enclosure immersed in water, in defined conditions of pressure and time, down to 1 metre.
IP68 rated ~ Same level of protection as defined for IP67; however enclosure can be immersed in water in defined conditions of pressure and time, beyond 1 metre.
IP Ratings explainedIP ratings refer to the level of protection a product has against solid objects,dust and contact with water. This is relevant to the enclosure, not anyconnections made from it. It is identified by a code of the letters IP followedby two digits.
The first digit indicates the level of protection that the enclosure providesagainst access to hazardous parts and ingress of solid foreign objects.The second digit indicates the level of protection that the enclosure providesagainst ingress of water.
• Similar to choosing wallpaper and paint, LED’s can vary from batch to batch PowerLed use a tight binning process to ensure consistency in LED colouring. If you are using several Strips in one installation, ensure they are chosen from the same lot and tone identifier.
• What is LED Binning? Binning, also known as selective assembly, is a process carried out to ensure high quality and consistency in regards to the performance and output of products. LED binning ensures the best performance and output of LED light and colour. It involves grouping LED’s together to maintain a tighter control of possible variations in output performance. The final product is assembled from selecting required components, or in this case, from the appropriate bins to meet specifications as closely as possible.
1. Add up the watts/metre to get a total power. (e.g a 3m length at 4.8W/m is 14.4W total)2. Choose the power. (e.g a driver is needed with a minimum of 14.4W but larger units are okay too so don’t worry if the next size up seems too powerful)3. Pick from the stand and take your purchase to the counter.
LED Flexible Strip - Want to calculate the driver needed for odd lengths?
• EN61347-2-13 on LED Drivers EN61347-2-13 relates to particular safety requirements for electronic control gear for LED modules. For use on DC power supplies up to 250V and 1000V for AC power supplies at 50~60Hz and with an output frequency which can deviate from the power supply frequency associated with LED modules.
Protection against over heating of LED driver. The figure is the absolute maximum temperature the device can reach during use.
Suitable for direct mounting on normally flammable surfaces, such as wood (>2mm).
Based on VDE0710-14, can be installed inside wooden cabinet. The minimum clearance is defined.
Limited power source.
Safety extra low voltage.
Full load operation up to 40˚C ambient with surface temperature of case <80˚C
RATED
RATED
RATED
RATED
RATED
RATED
IP65
IP44
IP41
IP20
IP67
IP68
tc: 80°Cta: 40°C
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 126
Sales Support
SupportBy Phone
Distributors
On Line
General Information - Symbol Keys
IP Rating
Cuttable Length ~ Length between cutting points
Amount of LEDs per Metre
Magnetic Product
Quick Connect ~ Plug & Play
Impact Protection
Cutting Measurement ~ Recessed LightsBeam Angle
PIR Detection Range
PIR Detection Distance
Lumens
ERP ~ Stage 2
Emergency
Latch Off Protection
Dusk to Dawn ~ Day to Night
Dimmable Product
If you would like to speak to our Sales team directly for advice or pricing, please call one of our experts on 0118 9408703. Fax: 0118 9812002
Our offices are open Monday to Friday, 8:45am – 5.30pm GMT.
We offer professional technical support for any questions you may have about your chosen products.
• One of our Technical Sales team can visit you at your workplace at your convenience.
• UK sales & technical phone support
• Datasheets Visit our website where you will find downloadable datasheets and technical support data at: www.powerled.uk.com
Call our Sales team on 0118 9408703 for advice and pricingwhen purchasing your products.
We have a network of authorised distributors, call us on 0118 9408703 to find out your nearest.
Visit our website to make any enquiries and to view our full product range at www.powerled.uk.com
LED Indicator Light
Power
ERP STAGE 2
16 WATTS
RATED
1350LUMENS
IP44
12M DETECTION
PROTECTION
IK10 IMPACT
PLUG & PLAY
MAGNETIC LATCH OFF
∅ 125MM
SENSITIVITY
180° RANGE
DIMMABLE
BEAM24
LEDS PER/MBEAM ANGLE
110°
INDICATOR
100MM
EMERGENCY
E
Notes
FLEX LED Floodlights Range ~ page 93
127
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 128
Notes
GENESIS3L IP65 rated Highbay ~ page 86GENESIS3L IP65 rated Highbay page 86
129
1. Interpretation1.1 In these Sale Conditions:“Buyer” means the entity which accepts a quotation of the Seller for the sale of the Goods or whose order for the Goods is accepted by the Seller.“Goods” means the Goods (including any instalment of the Goods or any parts for them (unless expressly stated otherwise)) which the Seller is to supply in accordance with these Sale Conditions.“Seller” means Sunpower Technology LLP a limited liability partnership registered in England and Wales under number 0C354995.“Sale Conditions” means the standard terms and conditions of sale set out in this document and (unless the context otherwise requires) includes any special terms and conditions agreed in writing between the Buyer and the Seller.“Contract” means the contract for the purchase and sale of the Goods.“Writing” includes e-mail, fax and comparable means of communication.1.2 Any reference in these Sale Conditions to any provision of a statute shall be construed as a reference to that provision as amended re-enacted or extended at the relevant time.1.3 The headings in these Sale Conditions are for convenience only and shall not affect their interpretation.
2. Basis of the sale2.1 The Seller shall sell and the Buyer shall purchase the Goods in accordance with any written quotation of the Seller which is accepted by the Buyer or any written order of the Buyer which is accepted by the Seller subject in either case to these Sale Conditions which shall govern the Contract to the exclusion of any other terms and conditions subject to which any such quotation is accepted or purported to be accepted or any such order is made or purported to be made by the Buyer.2.2 No variation to these Sale Conditions shall be binding unless agreed in Writing between the authorised representatives of the Buyer and the Seller.2.3 The use of the Goods is entirely at the Buyer’s own risk.2.4 Any typographical clerical or other error or omission in any sales literature quotation price list acceptance of offer invoice or other document or information issued by the Seller shall be subject to correction without any liability on the part of the Seller.2.5 If the sale of the Goods is subject to any “Special Conditions” not contained in these Sale Conditions but notified by the Seller the Buyer in writing, then such Special Conditions will be considered part of the Contract and shall be read alongside and incorporated within these Sale Conditions.
3. Orders and specifications3.1 No order submitted by the Buyer shall be deemed to be accepted by the Seller unless and until confirmed in Writing by the Seller’s authorised representative.3.2 The Buyer shall be responsible to the Seller for ensuring the accuracy of the terms of any order (including any applicable specification) submitted by the Buyer and for giving the Seller any necessary information relating to the Goods within a sufficient time to enable the Seller to perform the Contract in accordance with its terms.3.3 The quantity, quality and description of and any specification for the Goods shall be those set out in the Seller’s quotation (if accepted by the Buyer) or the Buyer’s order (if accepted by the Seller).3.4 If the Goods are to be manufactured or any process is to be applied to the Goods by the Seller in accordance with a specification submitted by the Buyer, the Buyer shall indemnify the Seller against all loss, damages, costs, and expenses awarded against or incurred or paid or agreed to be paid by the Seller which results from the Seller’s use of the Buyer’s specification to include any settlement of any claim for infringement of any patent, copyright, design, trade mark, or other industrial or intellectual property or other rights of any other person.3.5 The Seller reserves the right to make any changes in the specification of the Goods which are required to conform with any applicable statutory or EC requirements or where the Goods are to be supplied to the Seller’s specification which do not materially affect their quality or performance.3.6 No order which has been accepted by the Seller may be cancelled by the Buyer except with the agreement in Writing of the Seller and on terms that the Buyer shall indemnify the Seller in full against all loss (including loss of profit) costs (including the cost of all labour and materials used and reserved) damages charges and expenses incurred by the Seller as a resultof cancellation.
4. Price of the Goods4.1 The price of the Goods shall be the Seller’s quoted price or where no price has been quoted (or a quoted price is no longer valid) the price listed in the Seller’s published price list current at the date of acceptance of the order. Where the Goods are supplied for export from the United Kingdom the Seller’s
General Information - Terms & Conditions of Salepublished export price list shall apply. All prices quoted are valid for 30 days only or until earlier acceptance by the Buyer to the Seller.4.2 The Seller reserves the right by giving notice to the Buyer at any time before delivery to increase the price of the Goods to reflect any increase in the cost to the Seller which is due to any factor beyond the control of the Seller (such as without limitation any foreign exchange fluctuation currency regulation alteration of duties significant increase in the costs of labour materials or other costs of manufacture) any change in delivery dates quantities or specifications for the Goods which is requested by the Buyer or any delay caused by any instructions of the Buyer or failure of the Buyer to give the Seller adequate written information or instructions.4.3 Except as otherwise stated under the terms of any quotation or in any price list of the Seller and unless otherwise agreed in Writing between the Buyer and the Seller all prices are given by the Seller on an ex works basis and where the Seller agrees to deliver the Goods otherwise than at the Seller’s premises the Buyer shall be liable to pay the Seller’s charges for transport, packaging and insurance.4.4 The price is exclusive of any applicable value added tax, which the Buyer shall be additionally liable to pay to the Seller.
5. Terms of payment5.1 Subject to any special terms agreed in Writing between the Buyer and the Seller the Seller shall be entitled to invoice the Buyer for the price of the Goods on or at any time after delivery of the Goods unless the Goods are to be collected by the Buyer or the Buyer wrongfully fails to take delivery of the Goods in which event the Seller shall be entitled to invoice the Buyer for the price at any time after the Seller has notified the Buyer that the Goods are ready for collection or (as the case may be) the Seller has tendered delivery of the Goods.5.2 The Buyer shall pay the price of the Goods (less any discount to which the Buyer is entitled but without any other deduction) within 30 days of end of month and the Seller shall be entitled to recover the price notwithstanding that delivery may not have taken place and the property in the Goods has not passed to the Buyer. The time of payment of the price shall be of the essence of the Contract. Receipts for payment will be issued only upon request.5.3 If the Buyer fails to make any payment on the due date then without prejudice to any other right or remedy available Goods to be delivered at the Seller’s premises at the time when the Seller notifies the Buyer that the Goods are available for collection or:5.3.1 cancel the contract or suspend any further deliveries to the Buyer;5.3.2 appropriate any payment made by the Buyer to such of the Goods (or the goods supplied under any other contract between the Buyer and the Seller) as the Seller may think fit (notwithstanding any purported appropriation by the Buyer); and5.3.3 charge the Buyer interest (both before and after any judgement) on the amount unpaid at the rate of 4 per cent per annum above National Westminster Bank plc base rate from time to time until payment in full is made (a part of a month being treated as a full month for the purpose of calculating interest).
6. Delivery6.1 Delivery of the Goods shall be made by the Buyer collecting the Goods at the Seller’s premises at any time after the Seller has notified the Buyer that the Goods are ready for collection or if some other place for delivery is agreed by the Seller by the Seller delivering the Goods to that place.6.2 Any dates quoted for delivery of the Goods are approximate only and the Seller shall not be liable for any delay in delivery of the Goods howsoever caused. Time for delivery shall not be of the essence unless previously agreed by the Seller in writing. The Goods may be delivered by the Seller in advance of the quoted delivery date upon giving reasonable notice to the Buyer.6.3 Where the Goods are to be delivered in instalments each delivery shall constitute a separate contract and failure by the Seller to deliver any one or more of the instalments in accordance with these Sale Conditions or any claim by the Buyer in respect of any one or more instalments shall not entitle the Buyer to treat the Contract as a whole as repudiated.6.4 Subject always to the limitations of liability in clause 8, if the Seller fails to deliver the Goods (or any instalment) for any reason other than any cause beyond the Seller’s reasonable control or the Buyer’s fault and the Seller is accordingly liable to the Buyer the Seller’s liability shall be limited to the excess (if any) of the cost to the Buyer (in the cheapest available market) of similar Goods to replace those not delivered over the price of the Goods.6.5 If the Buyer fails to take delivery of the Goods or fails to give the Seller adequate delivery instructions at the time stated for delivery (otherwise than by reason of any cause beyond the Buyer’s reasonable control or by reason of the Seller’s fault) then without prejudice to any other right or remedy available to the Seller, the Seller may (in its absolute discretion):6.5.1 store the Goods until actual delivery and charge the Buyer for the reasonable costs (including insurance) of storage; or
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 130
6.5.2 sell the Goods at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Buyer for the excess over the price under the Contract or charge the Buyer for any shortfall below the price under the Contract.
7. Risk and Title7.1 Risk of damage to or loss of the Goods shall pass to the Buyer at the time of delivery to the Buyer of the Goods or if the Buyer wrongfully fails to take delivery of the Goods the time when the Seller has tendered delivery of the Goods.7.2 Notwithstanding delivery and the passing of risk in the Goods or any other provision of these Sale Conditions, title in the Goods shall not pass to the Buyer until the Seller has received in cash or cleared funds payment in full of the price of the Goods and all other Goods agreed to be sold by the Seller to the Buyer for which payment is then due.7.3 Until such time as the title in the Goods passes to the Buyer, the Buyer shall hold the Goods as the Seller’s fiduciary agent and bailee and shall keep the Goods separate from those of the Buyer and third parties and properly stored protected and insured and identified as the Seller’s property but, shall be entitled to resell or use the Goods in the ordinary course of its business.7.4 Until such time as title in the Goods passes to the Buyer (and provided the Goods are still in existence and have not been resold) the Seller shall be entitled at any time to require the Buyer to deliver up the Goods to the Seller and if the Buyer fails to do so forthwith to enter upon any premises of the Buyer or any third party where the Goods are stored and repossess the Goods.7.5 The Buyer shall not be entitled to pledge or in any way charge by way of security for any indebtedness any of the Goods which remain the property of the Seller but if the Buyer does so all moneys owing by the Buyer to the Seller shall (without prejudice to any other right or remedy of the Seller) forthwith become due and payable.
8. Warranties and liability8.1 Subject to the conditions set out below the Seller warrants that the Goods will correspond substantially with their specification at the time of delivery and will be free from material defects in material and workmanship for a period of twelve months from the date of their initial use or twelve months from delivery, whichever is the first to expire.8.2 All products are to be returned to point of sale by the Buyer at their cost unless specific agreement is in place with the seller to the contrary.8.3 The above warranty at clause 8.1 is given by the Seller subject to the following conditions:8.3.1 the Seller shall be under no liability under this Contract or otherwise in respect of any defect in the Goods arising from any drawing, design or specification supplied by the Buyer;8.3.2 the Seller shall be under no liability under this Contract or otherwise in respect of any defect in the Goods arising from fair wear and tear, wilful damage, negligence, abnormal working conditions of the Buyer, failure to follow the Seller’s instructions (whether oral or in writing) to the extent the same relates to the misuse or alteration or repair of the Goods by the Buyer without the Seller’s prior written approval;8.3.3 the Seller shall be under no liability under the above warranty (or any other warranty condition or guarantee) if the total price for the Goods has not been paid by the due date for payment;8.3.4 the above warranty does not extend to parts materials or equipment not manufactured by the Seller in respect of which the Buyer shall only be entitled to the benefit of any such warranty or guarantee as is given by the manufacturer to the Seller.8.4 Subject as expressly provided in these Sale Conditions all warranties, representations, conditions and other terms implied by statute or common law are excluded to the fullest extent permitted by law. Accordingly, to the extent permitted by law, the Seller does not warrant that the Goods will be of satisfactory quality, fit for purpose or appropriate for any particular use or application (regardless of any specification provided by the Buyer).8.5 Where the Goods are sold under a consumer transaction (as defined by the Consumer Transactions (Restrictions on Statements) Order 1976) the statutory rights of the Buyer are not affected by these Sale Conditions.8.6 Any claim by the Buyer which is based on any defect in the quality or condition of the Goods or their failure to correspond with specification shall (whether or not delivery is refused by the Buyer) be notified to the Seller within 7 days from the date of delivery or (where the defect or failure was not apparent on reasonable inspection) within a reasonable time after discovery of the defect or failure. If delivery is not refused and the Buyer does not notify the Seller accordingly the Buyer shall not be entitled to reject the Goods and the Seller shall have no liability for such defect or failure and the Buyer shall be bound to pay the price as if the Goods has been delivered in accordance with the Contract.
8.7 Where any valid claim in respect of any of the Goods which is based on any defect in the quality or condition of the Goods or their failure to meet specification is notified to the Seller in accordance with these Sale Conditions the Seller shall be entitled to replace the Goods (or the part in question) free of charge or at the Seller’s sole discretion refund to the Buyer the price of the Goods (or a proportionate part of the price) but the Seller shall have no further liability to the Buyer.8.8 Except in respect of death or personal injury caused by the Seller’s negligence the Buyer hereby undertakes to indemnify and hold harmless the Seller from and against any and all such losses costs liabilities and expenses including special or consequential loss or damages arising out of and in connection with any and all liabilities and obligations of the Seller expressly or impliedly assumed by the Buyer and any and all actions suits proceedings claims demands assessments and judgments in respect of any of the liabilities and obligations referred to in this Contract8.9 The Seller shall not be liable to the Buyer or be deemed to be in breach of the Contract by reason of any delay in performing or any failure to perform any of the Seller’s obligations in relation to the Goods if the delay or failure was due to any cause beyond the Seller’s reasonable control including any Force Majeure Circumstance as defined in Clause.
9. Indemnity9.1 Subject to clauses 9.2, 9.3, 9.4 and 9.5, if any claim is made against the Buyer that the Goods infringe or that their use or resale infringes any patent, copyright, design, trade mark, or other industrial or intellectual property or other rights of any other third party, then unless such claim arises as a result of either (a) the use of the Goods by the Buyer other than in the form supplied at delivery; or (b) use of any drawing, design or specification supplied to the Seller by the Buyer, the Seller shall indemnify the Buyer against all loss, damages, costs and expenses awarded against the Buyer in connection with such claim or paid or agreed to be paid by the Buyer in settlement of the claim provided that:9.1.1 the Seller is given full control of any proceedings or negotiations in connection with any such claim;9.1.2 the Buyer shall give the Seller all reasonable assistance for the purposes of any such proceedings or negotiations;9.1.3 except pursuant to a final award the Buyer shall not pay or accept any such claim or compromise any such proceedings without the consent of the Seller (which shall not be unreasonably withheld);9.1.4 the Buyer shall do nothing which would or might vitiate any policy of insurance or insurance cover which the Buyer may have in relation to such infringement and this indemnity shall not apply to the extent that the Buyer recovers any sums under any such policy or cover (which the Buyer shall use its best endeavours to do);9.1.5 the Seller shall be entitled to the benefit of and the Buyer shall accordingly account to the Seller for all damages and costs (if any) awarded in favour of the Buyer which are payable by or agreed with the consent of the Buyer (which consent shall not be unreasonably withheld) to be paid by any other party in respect of any such claim; and9.1.6 without prejudice to any duty of the Buyer at common law the Seller shall be entitled to require the Buyer to take such steps as the Seller may reasonably require to mitigate or reduce any such loss damages costs or expenses for which the Seller is liable to indemnify the Buyer under this clause.9.2 For the avoidance of doubt, the indemnity at clause 9.1 shall not apply in circumstances where the Buyer installs or applies the Goods as part of another product or uses the Goods in anyway with another product other than in the form supplied at time the Goods were delivered to the Buyer.9.3 Subject to clause 9.4, the Seller shall not have any liability whatsoever in contract, tort (including negligence), breach of statutory duty or otherwise for any: indirect; economic; incidental; special; exemplary; or consequential loss or damage; loss of profit opportunity, anticipated profit, anticipated revenue, business and/or goodwill, suffered by the Buyer in relation to this Contract even if the Buyer has been advised of the possibility of such damages or losses.9.4 Nothing in these Sale Conditions excludes or limits the Seller’s liability for:9.4.1 death or personal injury arising out of the negligence or breach of statutory duty of the Seller or its authorised representatives;9.4.2 deliberate personal repudiatory breach of the Contract by the Seller; or9.4.3 fraud or anything else that may be excluded or limited by law.9.5 Subject to clause 9.4, the Seller’s aggregate liability whatsoever arising in contract, tort (including negligence), breach of statutory duty or otherwise shall not exceed the greater of:9.5.1 the amount of the fees received by the Buyer for the Goods at the date such action or claim arises; or 9.5.2 £5,000.
Terms & Conditions of Sale continued
131
Our catalogue is printed on paper sourced from certified sustainable forests with vegetable-based soya inks.
10. Insolvency of Buyer10.1 This clause applies if:10.1.1 the Buyer makes any voluntary arrangement with its creditors or (being an individual or firm) becomes bankrupt or (being a company) becomes subject to an administration order or goes into liquidation (otherwise than for the purposes of amalgamation or reconstruction) or10.1.2 an encumbrance takes possession or a receiver is appointed of any of the property or assets of the Buyer or10.1.3 the Buyer ceases or threatens to cease to carry on business or10.1.4 the Seller reasonably apprehends that any of the events mentioned above is about to occur in relation to the Buyer and notifies the Buyer accordingly.10.2 If this clause applies then without prejudice to any other right or remedy available to the Seller the Seller shall be entitled to cancel the Contract or suspend any further deliveries under the Contract without any liability to the Buyer and if the Goods have been delivered but not paid for the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary.
11. Force Majeure11.1 The Seller shall not be liable to the Buyer for any loss or damage which may be suffered by the Buyer as a direct or indirect result of the supply of the Goods by the Seller being prevented hindered delayed or rendered uneconomic by reason of any Force Majeure Circumstances.11.2 this condition “Force Majeure Circumstances” shall mean any Act of God, riot, strike, lock out, trade dispute or labour disturbance; accident, break down of plant or machinery, fire, flood, difficulty or increased expense in obtaining workmen materials or transport or other circumstances whatsoever outside the reasonable control of the Seller affecting the provision of the Goods or of raw materials therefore by the Seller’s normal source of supply or the manufacture of the goods by the Seller’s normal means or the delivery of the Goods by the Seller’s normal route or means of delivery.11.3 If due to Force Majeure Circumstances the Seller has insufficient stock to meet all its commitments the Seller may apportion available stocks between its customers at its sole discretion.
12. General12.1 Any notice required or permitted to be given by either party to the other under these Sale Conditions shall be in Writing addressed to that other party at its registered office or principal place of business or such other address as may at the relevant time have been notified pursuant to this provision to the party giving the notice.12.2 No waiver by the Seller of any breach of the Contract by the Buyer shall be considered as a waiver of any subsequent breach of the same or any other provision.12.3 If any provision of these Sale Conditions is held by any competent authority to be invalid or unenforceable in whole or in part the validity of the other provisions of these Sale Conditions and the remainder of the provision in question shall not be affected thereby.12.4 Other than instructions from the Seller relating to the storage of the Goods and/or otherwise as set out in clause 8.3 or any Special Conditions (if relevant), these Sale Conditions constitute the sole and entire understanding of the Seller and Buyer in relation to the subject matter of the Contract and supersede all previous agreements, representations and arrangements between the Seller and the Buyer (either oral or written) with regard to the subject matter of the Contract. The Seller and Buyer confirm that they have not entered into the Contract on the basis of any representations that are not expressly incorporated in the Contract. The Seller and Buyer irrevocably and unconditionally waives any rights they may have to claim damages and/or to rescind the Contract for any misrepresentation in relation to the subject matter of this Contract whether or not contained in this Contract or for breach of warranty not contained in this Contract unless such misrepresentation or warranty was made fraudulently. This Contract may only be amended or supplemented in writing and signed by an authorised representative of both the Seller and the Buyer.12.5 The Contract shall be governed by and construed in accordance with the laws of England, and the parties hereby agree to submit to the non-exclusive jurisdiction of the English Courts.
128
Product Catalogue 2017 Edition 1 www.powerled.uk.com 0118 9408703 132
Engineered to perform.
With 20 years of electronics expertise and over seven years in lighting and luminaires, we are proud to offer UK quality control and support, backed by lean, high-tech manufacturing techniques, ensuring our products deliver excellence every time.
We achieve high reliability, professional LED fixtures based on our own technology platform of the LED driver and deliver an end product without compromise, supported by UK stock, project support and after sales, with factories and systems accredited to ISO9001.
If we do not already have a stock product to offer from our extensive range, we can design custom luminaires to fit specific space envelopes, designs, budgets or performances with total peace of mind that whole life support is assured. Call PowerLed today to find out more about products designed to last.
Orion House, Calleva Park, Aldermaston, Berkshire RG7 8SN.www.PowerLed.uk.com Tel: 0118 9408703 ISO 9001:2008