PRODUCT CATALOGUE
Metrica Interior has provided transformation to properties
for more than 15 years.
The strong performance of Qatar’s economy and the expected boom in construction to meet the country’s major events, rose the need for a cutting edge Architectural and Interiors company that can support this growth with innovative high quality products and services. With the acquisition of Metrica in Germany, GSSG has been transforming Al Bateel Interiors into the leading Architectural and Interiors company in Qatar, with international standards and exposure. The combination of 330 years experience in Germany with more than 15 years of experience in Qatar resulted in a new company: Metrica Interior.
Driven by strong vision, the company setup it’s first factory in 1998. This ambitious beginning has evolved to a successful state-of-the-art factory with the ability to deliver large scale projects. As envisaged in Qatar National Vision 2030, and to strike a balance between economical growth and protection of the environment, we have received FSC (Forest Stewardship Council) certification. This ensures that timber, used to deliver our high quality products, are procured from sustainable forests.
Our passionate team of specialists strive to achieve our customer’s needs for high quality interiors by combining craftsmanship and the latest technology.
Introduction
At Metrica, we design and produce exceptional internal doors and frames. We have a very wide range which includes real wood veneers, high quality reproduction laminates and paint finishes.
Our timber interior doors and frames are completely pre-finished and pre-hung so that it can be assembled and installed in few hours. We also produce apartment entrance doors, sliding doors and glazed doors.
Our range of doors includes both traditional and contemporary designs to suit any preference or budget. We supply full door sets as well as door leafs. We can produce any quantity and any size, within a short lead time.
Metrica’s internal doors and frames are high quality, functional, aesthetically pleasing and cost effective.
Standard Doors
IntroductionHalspan 3-layer particle board has been designed for use in the fabrication of solid core doors. A complex combination of chemical and engineering development has resulted in the superior quality and strength of Halspan high performance timber door blanks. Produced on one of the world’s most advanced CPS systems to ensure continuity of quality for the product. It is this expertise that sets Halspan above other door constructions.
Halspan door blanks have been ready tested for use in the manufacture of fire doors. By using Halspan in the construction of flush or panelled doors, Halspan’s pre-test programme readily enables the inclusion of fire doors of the same style and finish as the standard, non-fire door specification.
These high standards, applied in making Halspan door blanks, also apply to Halspan’s technical support. Literature and advice provide a continuity of quality right through, from manufacture to installation.
A Greener AlternativeFor some time now it has been known that the formaldehyde type resins typically used to glue/bond timber building and panel products, such as plywood, MDF, chipboard and wood laminate, carry health risks. Although inert when fully cured, Phenol Formaldehyde for instance is hazardous to use; so much so that you need a licence to import it in some countries. Urea and Melamine Formaldehyde, meanwhile, continue to give off emissions even after they’re cured, leading to sickness and headaches.
This has led to a demand for ‘no added formaldehyde’ products (‘no added’ rather than ‘free from’ since a small amount of formaldehyde is naturally present in wood) and for ways of assessing environmental performance. In the UK, BREEAM (Building Research Establishment Environmental Assessment Method) sets the standard, while in the US it’s LEED (Leadership in Energy and Environmental Design). Developed in response to these concerns, Halspan Prima Plus – With No Added Formaldehyde – is produced to the same exacting standards as our regular Prima, but uses Polyurethane instead of the more traditional Urea Formaldehyde binder. A ‘greener’ alternative, Halspan Prima Plus minimizes formaldehyde emissions and improves indoor air quality, complying with both BREEAM and LEED environmental standards.
Fire-Rated DoorsHalspan BS 476 Firedoors
Solid Wood Lippling with FR intumescent Seal
FR Core Material
Decorative Facing ( Veneer/ HPL/ Paint)
Halspan FD30
Char
acte
risa
tion
Doo
r Fr
ames
Doo
r se
t Con
figur
atio
nsFe
atur
es
Prima
MDF
Softwood
Hardwood
LSASD
LSASD+OP
ULSASD
ULSASD+OP
DASD
DASD+OP
LSADD
ULSADD
DADD
LSADD+OP
DADD+OP
Glazing Area
Panel Effect
Feature Grooves
Paint Finish
Veneer
HPL
PVC
Average Density
Average Weight
Acoustic Performance
Mechanical (Duty Grade)
Optima Prima Optima Prima Prima
Halspan FD60 Halspan FD90 Halspan FD120
44mm Fire Rated 30 minutes BS476 pt 22
54mm Fire Rated 60 minutes BS476 pt 22
64mm Fire Rated 90 minutes BS476 pt 22
64mm Fire Rated 120 minutes BS476 pt 22
1.29m² 1.29m² 0.82m² 0.82m² 0.56m² 0.54m²
27.7 kg m²
Tested
Severe Severe
Tested
27.2 kg m²
630kg m³±10%
40 kg m²
Tested
Severe
630kg m³±10%
45.5 kg m²
710kg m³±10%620kg m³±10%
34 kg m²
Tested
Severe Severe
Tested
34 kg m²
650kg m³±10% 620kg m³±10%
Technical Data
Note: Halspan prima plus available for 30min & 60min ratings.
Technical Data
Halspan UL 10C Fire DoorsHalspan BS 476 Fire doors
Halspan 45 Halspan 60 Halspan 90
44.5mm thk fire doors
Stiles & Rails
North Amarican codes (NFPA 252, ANSI UL10(c), UBC 7-2 & CAN4 S104
Made from gypsum, organic fibers, fiberglass and inert binders.
1.364m² 0.364m² 0.364m²
18.3 kg / m²
1263-1378 kg / m³
32-34 kg / m²
481kg / m³
18.3 kg / m²
1263-1378 kg / m³
32-34 kg / m²
481kg / m³
18.3 kg / m²
1263-1378 kg / m³
32-34 kg / m²
481kg / m³
Composite Mineral Core Product
LSASD
DADD
Over Panel
Glazing Area
Panel Effect
Feature Grooves
Paint Finish
Veneer
HPL
PVC
Core Density
Core Weight
Stiles & Rails Density
Stiles & Rails Weight
Char
acte
risa
tion
Doo
r Fr
ames
Doo
r se
t Con
figur
atio
nsFe
atur
es
IntroductionNorth American codes (NFPA 252, ANSI UL10(c), UBC 7-2 & CAN4 S104) are component based codes for a range of standard door set items from the door leaf and frame to the hardware installed in a variety of uses, standard doors, double egress doors and emergency exit doors. Each component is tested and then given a code category A – E, derived from the openings in the type of separating elements in which they are designed to be used (See NFPA 80 and the details below) thus allowing a greater freedom for interchangeability.
Optional: -
Vision Glass Louvers
Warmsprings20min
Warmsprings45min
Warmsprings60min
Warmsprings90min
44.5mm thk fire doors
Stiles & Rails
North Amarican codes (NFPA 252, ANSI UL10(c), UBC 7-2 & CAN4 S104
Branded Mineral Door Core.
Tectonite, Solid Wood, MDF or Hard Wood
LSASD
DADD
Over Panel
Glazing Area
Panel Effect
Feature Grooves
Paint Finish
Veneer
HPL
PVC
Char
acte
risa
tion
Doo
r Fr
ames
Doo
r se
t Con
figur
atio
nsFe
atur
es
Technical Data
Warm SpringsIntroductionWarm Springs Composite Products, a Native American-owned manufacturer based in Central Oregon, has for years supplied its Tectonite-based fire-rated door components to door manufacturers for high-rise commercial and industrial construction projects the world over. A unique amalgam of diatomaceous earth, fiberglass, recycled newspaper, and other ingredients, Tectonite was first developed and tested internally by Warm Springs Composite Products in 1993. The resulting material has since been tested and certified by five different testing agencies to achieve fire ratings from 20 minutes to 120 minutes. Widely known in the industry, Tectonite is the basis for WSCP’s line of value-added fire-rated door components.Tectonite characteristics:• Lightest of comparable products on the market• Superb screw holding• Excellent bonding with a variety of adhesives• Less heat transfer than comparable products• Low cost
TestingTectonite is certified (UBC 7-2, 90 min.) as a component for fire-rated doors in all openings up to and including 8-foot by 9-foot pairs with all applicable hardware. Five certifying agencies have successfully tested Tectonite components for fire endurance ratings.
Optional: -
Vision Glass Louvers
With perfection and style, Metrica Interior makes your individual living dream come true, be it extravagant residences, office premises, luxury shops or exclusive hotels. Our excellent team is fully focused on delivering perfect results within defined schedules and budgets. We use carefully selected materials sourced from all corners of the world. Unique room concepts are brought to life with our first-class and profound expertise originating from the yacht interior outfitting.
Metrica Interior manages the entire project for you. We deploy a highly professional project management team who make sure your schedule and budget are strictly adhered to, meaning we can ensure that nothing stands in the way of your dream project. We deliver nothing less than the best in each phase of the project. We take your requests and wishes seriously and are not satisfied until you are.
Customised Products
TIMBER DOORS &FLUSH DOORS
FIRE DOORS & ACOUSTIC DOORS
KITCHEN CABINETS & WARDROBES
CEILING & WALL CLADDING
HANDRAILS & SKIRTING
CARVING &ORNAMENTAL WORK
COUNTERS
OFFICE FURNITURE
This scheme has been designed to allow the manufacturer to provide quality assurance to the fire doors to meet the standards of ameriacn ANSI UL10c & British BS 476 part 22.
Forest Stewardship Council (FSC) is a global organization which developed a system of forest certification and product labelling that allows consumers to identify wood and wood-based products from well managed forests.
This system is to demonstrate our capability and allows for continuous improvement in quality management systems and processes which in turn improve the reliability of operations to meet customers’ satisfaction.
AWI the Architectural woodwork Institute system is promoting the value of architectural woodwork and provides industry education to achieve the highest quality level.
This system is used to help the organizations to protect the environment, to prevent pollution, and to improve their environmental performance with minimal wastage.
This system is used to provide better health & safety conditions and factors that affect the wellbeing of employees, temporary workers, contractor personnel, visitors and any other person in the factory.
Certification
• KHALIFA SPORTS CITY Counters and Ticketing Booths
• DOHA CONVENTION CENTER Wall Cladding, Ceiling and Doors
• ASPIRE TOWER Fire and Acoustic Doors, Cabinets and Timber Flooring
• GEORGETOWN UNIVERSITY Doors and Cladding
• NEW DOHA INTERNATIONAL AIRPORT, PASSENGER TERMINAL Doors and Cladding
• QATAR UNIVERSITY STUDENT HOUSING Fire Rated and Non Fire Rated Doors
• HAMAD MEDICAL CITY Counters and Nurse Stations
• DOHA WOMEN’S CLUB Wall Cladding and Doors
• TORNADO TOWERS Doors and Cladding
• FIVEMOSQUESatdifferentlocations External and Internal Doors
• SOUQ WAQIF HOTEL Doors, Cladding, Wardrobes, Kitchens and Bed Headers
• VIVA BAHRIYA - THE PEARL Doors
• NAJMA HOTEL APARTMENTS Doors, Wardrobes, Vanity Units, Bed Headers, TV Consoles, Ceiling
and Wall Cladding
• AL MAHA SCHOOL Counters and Cabinet
Some of the company’s major projects include:
We also offer complete turnkey solutions for offices, hospitals, hotels, schools, and high-end villas and yachts.
Our Projects
ô`````£````b - á`````MhódG ,92987 :Ü.¢U
P.O. Box: 92987, Doha - QatarEmail: [email protected]
+974 4415 1999 :∞``JÉ`g
Tel.: +974 4415 1999+974 4411 4847 :¢ù``cÉa
Fax: +974 4411 4847Metrica® Interior W.L.L.
.Ω.Ω.P á«Ñ°ûÿG ∫ɪYCÓd ®ÉµjÎe