2017

PRODUCT CATALOGUE RENSSI® TOOLS 2017

CHAIN KNOCKERSBRUSHESCUTTERSCENTERING AXELSSANPAPERHOLDERSADAPTERS & ACCESSORIESPRESSADJUSTABLE CLUTCHINVERSION DRUMSDRUM HEADSRENSSI® MACHINECABLESCABLE BALLBEARINGS

How to Buy Chain Knockers

Chain Knockers

How to Buy Brushes

Brushes

Cutters

Centering Axels

Cable Connectors

Sandpaper Holders & Sandpapers

Overshot Pipe Cutter

How to Buy Adapters & Accessories

Adapters & Accessories

How to Buy Equipment

Press

Adjustable Clutch

Inversion Drums

Drum Heads

Renssi® Machine

How to Buy Cables

Cables

Cable Covers & Rotating Cables

Cable Ballbearings

Metric Allen Key Set

4-5

6-9

10-11

12-13

14-15

16-17

16-17

18

19

20-21

22-23

24-25

26

27

28-29

30-31

32-33

34-35

36-37

38

39

39

PRODUCT CATEGORIES

4

How to Buy Chain KnockersRenssi is a revolutionary, mechanically rotated tool for sewer cleaning and pipeline renovations.

Depending on the size of the tool, it has one to three chains with solid carbide inserts brazed on the chainlinks. Because of the inserts, which make the tool so special, the pipe is cleaned out of rust and dirt very effectively.There are two different types of connections to the rotating wire. The wire can be put through the tool and tightened using allen screws or it can be connected using t-slot connectors.

RS-(16)-10 50-(/2)-DR

®

Tool's identificationEvery tool has it’s own code which is used when ordering. Renssi has codes RS, RS-T, RSM, RH, RD, RA, SR, RT, RP, RP-T, RID, DH, CLT, TC, RC and RCC. Chain knockers are found under codes RS, RS-T and RSM.

Cable size Ø 1 = 8mm2 = 10mm 3 = 12mm

(Diameter Ø)ONLY included in RS-T series!Defines the adapter diameter for RS-T series.

5

RS-(16)-10 50-(/2)-DRFeatures of ChainsChain knockers has usually three chains but we have also few models with two chains and even with one chain. They are marked up with /2 or -1–codes.4T stands for 4mm chain and tips.

Information of ToolDR stands for drill head

feature. You can open up for

example a lateral connection

with it.

Pipe size ØTools are designed to match the pipe size. Right size chain knocker cleans the pipe gently without harming the surfaces of the pipe.

6

CHAIN KNOCKERS

Product code

RS-1050/2

RS-1050

RS-1075/2

RS-1075

RS-1100

RS-1125

RS-1150

RS-1200

Pipe Ø (mm)

35-50 mm

35-50 mm

50-75 mm

50-75 mm

75-100 mm

100-125 mm

125-150 mm

150-200 mm

RS 1000 SERIES 8mm cable connection

Product code

RS-2050/2

RS-2050

RS-2075/2

RS-2075

RS-2100

RS-2125

RS-2150

RS-2200

Pipe Ø (mm)

35-50 mm

35-50 mm

50-75 mm

50-75 mm

75-100 mm

100-125 mm

125-150 mm

150-200 mm

RS 2000 SERIES 10mm cable connection

Product code

RS-3050/2

RS-3050

RS-3075

RS-3100

RS-3125

RS-3150

RS-3200

Pipe Ø (mm)

35-50 mm

35-50 mm

50-75 mm

75-100 mm

100-125 mm

125-150 mm

150-200 mm

RS 3000 SERIES 12mm cable connection

TOOLS FOR CABLES

RS-2200

RS-3125

REGULAR HEAD

RS-1125

6

7

Pipe Ø (mm)

35-50 mm

50-75 mm

75-100 mm

100-125 mm

125-150 mm

150-200 mm

Pipe Ø (mm)

35-50 mm

35-50 mm

50-75 mm

75-100 mm

100-125 mm

125-150 mm

150-200 mm

Pipe Ø (mm)

35-50 mm

35-50 mm

50-75 mm

75-100 mm

100-125 mm

125-150 mm

150-200 mm

CHAIN KNOCKERS

Product code

RS-1050/2-DR

RS-1050-DR

RS-1075-DR

RS-1100-DR

RS-1125-DR

RS-1150-DR

RS-1200-DR

Product code

RS-2050/2-DR

RS-2050-DR

RS-2075-DR

RS-2100-DR

RS-2125-DR

RS-2150-DR

RS-2200-DR

Product code

RS-3050-DR

RS-3075-DR

RS-3100-DR

RS-3125-DR

RS-3150-DR

RS-3200-DR

DRILL HEAD TOOLS FOR CABLES

RS-1100-DR

RS-2150-DR

RS-3150-DR

7

DRILL HEAD

RS 1000 SERIES 8mm cable connection

RS 2000 SERIES 10mm cable connection

RS 3000 SERIES 12mm cable connection

8

Pipe Ø (mm)

35 mm

35 mm

35-50 mm

35-50 mm

30 mm

30 mm

35-50 mm

MINI RENSSI TOOLS

Product code

RSM-1035-1

RSM-1035-2

RSM-1050-1

RSM-1050-2

RSM-2030-1

RSM-2030-2

RSM-2050-2

RSM SERIES

Pipe Ø (mm)

50-75 mm

75-100 mm

100-125 mm

125-150 mm

150-200 mm

Product code

RS-T-16-50

RS-T-16-75

RS-T-16-100

RS-T-16-125

RS-T-16-150

RS-T-16-200

RS-T 16 SERIES T-slide connectors

T-SLIDE SERIES

Product code

RS-T-20-75

RS-T-20-100

RS-T-20-125

RS-T-20-150

RS-T-20-200

RS-T 20 SERIES T-slide connectors

Pipe Ø (mm)

50 mm

50-75 mm

75-100 mm

100-125 mm

125-150 mm

150-200 mm

RSM-1035-1

9

Pipe Ø (mm)

75-100 mm

100-125 mm

125-150 mm

150-200 mm

Product code

RS-2100-4T

RS-2125-4T

RS-2150-4T

RS-2200-4T

RS 2000-4T SERIES 10mm cable connection

TOOLS FOR CABLES WITH 4mm CHAIN & TIPS

Pipe Ø (mm)

75-100 mm

100-125 mm

125-150 mm

150-200 mm

Product code

RS-3100-4T

RS-3125-4T

RS-3150-4T

RS-3200-4T

RS 3000-4T SERIES 12mm cable connection

Product code

RS-T-16-100-4T

RS-T-16-150-4T

RS-T-16-200-4T

T-SLIDE SERIES WITH 4mm CHAIN & TIPS

Pipe Ø (mm)

75-100 mm

125-150 mm

150-200 mm

Product code

RS-T-20-100-4T

RS-T-20-150-4T

RS-T-20-200-4T

Pipe Ø (mm)

75-100 mm

125-150 mm

150-200 mm

RS-T 16 SERIES T-slide connectors

RS-T 20 SERIES T-slide connectors

RS-T-20-125

RS-2150-4T

RSM-1050-2

10

RH-1050-40-07

How to Buy BrushesBrushes have quite many different ways of use.

Brushes are good for example to clean plastic pipes, where the use of the chain knocker is too heavy. Brushes are also suitable for spreading the paste in the spraylining method and also to center different kinds of tools in the pipe, like drills etc.

High-quality strings are made of nylon. We have also NYLON/STEEL brushes which are especially designed for cleaning plastic pipes.

Tool's identificationEvery tool has its own code which is used when ordering. Renssi has codes RS, RS-T, RSM, RH, RD, RA, SR, RT, RP, RP-T, RID, DH, CLT, TC, RC and RCC. Brushes are found under code RH.

Cable size Ø 0 = 6mm1 = 8mm 2 = 10mm3 = 12mm

Brush’s Diameter Ø Tools are designed to match the pipe size. Right size brush cleans the pipe gently without harming the surfaces of the plastic pipe.

11

RH-1050-40-07Length of the HubDefines the length of the hub in millimeters.

Information of the ToolThis defines the thickness of the nylon string. 07 stands for 0,7 mm string etc. You can choose from 0,3 - 0,5- 0,7 - 0,9 (mm).

NS stands for NYLON/STEEL brush which is designed for a bit heavier cleaning and also for grinding the surface of the plastic pipe before spraylining. NS brushes are only available with one size strings.

We can also make a custom brush regarding to customer’s needs.

12

BRUSHES

Product code

RH-1040-14-03

RH-1045-14-03

RH-1050-14-03

RH-1050-20-03

RH-1075-20-05

RH-1075-20-07

RH-1100-20-05

RH-1100-20-07

RH-1125-29-05

RH-1125-29-07

RH-1150-29-05

RH-1150-29-07

RH-1160-40-07

RH-1175-29-05

RH-1175-40-07

RH-1200-40-07

Diameter Ø

Ø 40 mm

Ø 45 mm

Ø 50 mm

Ø 50 mm

Ø 75 mm

Ø 75 mm

Ø 100 mm

Ø 100 mm

Ø 125 mm

Ø 125 mm

Ø 150 mm

Ø 150 mm

Ø 160 mm

Ø 175 mm

Ø 175 mm

Ø 200 mm

Hub length

14 mm

14 mm

14 mm

20 mm

20 mm

20 mm

20 mm

20 mm

29 mm

29 mm

29 mm

29 mm

40 mm

29 mm

40 mm

40 mm

NYLON BRUSHES Center hole of the hub 8mm

BRUSH STOCKLIST

Product code

RH-1075-24-NS

RH-1105-24-NS

RH-1130-24-NS

RH-1155-29-NS

RH-1175-29-NS

RH-1205-29-NS

Diameter Ø

Ø 75 mm

Ø 105 mm

Ø 130 mm

Ø 155 mm

Ø 175 mm

Ø 205 mm

Hub length

24 mm

24 mm

24 mm

29 mm

29 mm

29 mm

NYLON/STEEL BRUSHES Center hole of the hub of 8mm

If you are seeking A CUSTOM BRUSH

designed to your needs, you can order them from us. Our minimum custom brush

order is 10 brushes.

INFO

13

SECURING RING for Brushes

Product code

SR-20-006

SR-20-008

SR-20-010

SR-20-012

Product

for 6mm cable

for 8mm cable

for 10mm cable

for 12mm cable

The securing ring is used to prevent a drop of the brush from the cable during the cleaning.

13

14

®

RLC-100

RLC-150

RLC-075

CUTTERSProduct code

RLC-050

RLC-075

RLC-100

RLC-150

Diameter Ø

50mm

75mm

100mm

150mm

Cable size Ø

for 50mm pipe

for 75mm pipe

for 100mm pipe

for 150mm pipe

CUTTERS for Branch connections

14

15

RCD-100

RD-008

RLC-050

Product code

RD-008

RD-010

RD-012

Cable size Ø

for 8mm cable

for 10mm cable

for 12mm cable

CABLE TIP DRILL

Product code

RCD-050

RCD-100

RCD-I-050

RCD-I-100

Information

Ø 50mm, 5 inserts

Ø 100mm, 5 inserts

50mm - 5 inserts and screws

100mm - 5 inserts and screws

COLLAPSE LINE DRILL

Includes sleeves for 8mm, 10mm and 12mm cables.

Cutters are used in different operations of relining process.

For example RLC-100 is used to open the lateral connection

in 100 mm pipe.

CUTTER INFO

RLC-075

15

16

Cable connectors can connect centering axel

or another cable to your cable.

INFO

Product code

RCA-050

RCA-075

RCA-100

RCA-150

Cable size Ø

for 50mm pipe

for 75mm pipe

for 100mm pipe

for 150mm pipe

Centering Axels are used to centralize different Renssi® Tools to get the best result for your job.

Suitable tools are for example RCD and RLC tools. Centering Axel has high quality ballbearings inside to make it

rotate well.

INFO

Product code

CC-050

CC-100

CC-150

CC-008

CC-010

CC-012

CC-014-010

CC-014-012

Information

for 50mm centering axel /Ø 14mm

for 100mm centering axel/Ø 14mm

for 150mm centering axel/Ø 14mm

for 8 mm cable

for 10 mm cable

for 12mm cable

for 10mm cable to connect centering axel

for 12mm cable to connect centering axel

RCA-150

ROC-100 + RCA-050 + CC-050

CABLE CONNECTORS

CENTERING AXELS

16

CUTTER ASSEMBLY

17

RCA-050 RCA-075

17

CC-050 CC-100 CC-008 CC-010 CC-012 CC-150

18

RSP-40-110 and RSP-20-55

SANDPAPER HOLDER

Product code

RSP-20-55

RSP-40-110

Product size Ø

55mm wide, 4 papers, Ø 20mm

110 mm wide, 4 papers, Ø 40mm*

SANDPAPER HOLDERS

SANDPAPERS

* Includes sleeves for 8mm, 10mm and 12mm cables.

Product code

SPB-2-3

SPB-2-4

SPB-2-6

SPB-4-4

SPB-4-6

Product size

50mm width x 75mm length

50mm width x 100mm length

50mm width x 150mm length

100mm width x 100mm length

100mm width x 150mm length

If you overshoot a liner in 4” pipe, you can easily cut off the excess liner with our Overshot Pipe Cutter.

INFO

18

19

Product code

ROC-100

Product size Ø

for 100mm pipe

OVERSHOT PIPE CUTTER

RSP is a sandpaper grinder, with four sandpapers attached to it’s body. After

cutting a lateral, you can finish the job with it. Use this with different size sandpapers,

to match the pipe you are working with.

INFO 19

20

How to Buy AdaptersIn this category you can find adapters to connect Renssi® Tools with your gear. There are also available many kinds of other accessories which you can use with your Renssi® Tools. With the definition code, you can easily define what kind of and which size adapter you need.

RA-16-00 1-008-IXT-slide femaleT-slide maleEndbit of cable6mm hole8mm hole10mm holeRotator shaft12mm hole8mm pom shaft10mm pom shaft12mm pom shaft16mm pom shaftM14 thread maleShackle, stainless steelM10 thread femaleG¼ thread maleG¼ thread female

Adapter from001 002 003 006008 010011 012P08P10P12 P16 033 060 065 070 071

Connector series size ØDefines the diameter of the adapter.

Tool's identificationEvery tool has its own code which is used when ordering. Renssi has codes RS, RS-T, RSM, RH, RD, RA, SR, RT, RP, RP-T, RID, DH, CLT, TC, RC and RCC. Adapters and accessories are found under code RA and SR.

21

RA-16-00 1-008-IXInformation of ToolIX means that the adapter is fully made of stainless steel. This feature makes it extra strong.

T-slide femaleT-slide maleEndbit of cable6mm hole8mm hole10mm holeRotator shaft12mm hole8mm pom shaft10mm pom shaft12mm pom shaft16mm pom shaftM14 thread maleShackle, stainless steelM10 thread femaleG¼ thread maleG¼ thread female

Adapter to001 002 003 006008 010011 012P08P10P12 P16 033 060 065 070 071

22

Product

T-slide, female, 8mm cable

T-slide, female, 10mm cable

T-slide, male, 8mm cable

T-slide, male, 10mm cable

8mm cable, ½" UNF thread male

T-slide, female, 10mm cable

T-slide, female, 12mm cable

T-slide, male, 10mm cable

T-slide, male, 12mm cable

T-slide from 16mm to 20mm

M14 thread male, rotator shaft

Product code

RA-16-001-008

RA-16-001-010

RA-16-002-008

RA-16-002-010

RA-16-008-021

RA-20-001-010

RA-20-001-012

RA-20-002-010

RA-20-002-012

RA-20-001/16-002

RA-24-033-011

CONNECTORS 16-20-24mm

RA-16-001-060-IX

RA-16-002-008

RA-20-012-011

Product code

RA-080-010-IX

RA-080-012-IX

Product

for 10mm cable, Ø 8mm shaft inox

for 12mm cable, Ø 8mm shaft inox

BRUSH ADAPTERS

Product code

RA-014

RA-015

Product

T-Slide opener key 4mm

T-Slide opener key 5mm

ACCESSORIES

22

Product code

RA-16-002-011

RA-16-008-011

RA-16-010-011

RA-20-002-011

RA-20-012-011

ROTATOR SHAFTS

Product

T-slide, male, rotator shaft

8mm cable, rotator shaft

10mm cable, rotator shaft

T-slide, male rotator shaft

12mm cable, rotator shaft, male

RA-20-001-/16-002

ADAPTERS & ACCESSORIES

23

RA-016

23

RA-20-070-P08

Packers

PP-D30-720-08

PP-D40-720-10

PP-D60-720-10

Information

assembly, Ø30mm, length 720mm, 8mm

assembly, Ø40mm, length 720mm, 10mm

assembly, Ø60mm, length 720mm, 10mm

Product code

RA-010

RA-016

Information

10mm pom axle, length 1,5m

16mm pom axle, length 1,5m

PUSH RODS

Push rods for T-slide with male and female ends.

Push rods are manufactured by customer’s needs. Minimum order is 5 pcs.

Push rod connectors

RA-20-001-P16-IX

RA-20-002-P16-IX

RA-20-070-P08

RA-20-070-P10

RA-20-070-P16

RA-20-071-P10

RA-16-001-060-M4-IX

RA-16-001-060-M5-IX

RA-20-001-060-M6-IX

Information

T-slide, female, 16mm pom shaft inox

T-slide, male, 16mm pom shaft inox

G¼ male, 8mm pom shaft

G¼ male, 10mm pom shaft

G¼ male, 16mm pom shaft

G¼ female, 10mm pom shaft

T-slide, female, shackle M4 aisi 316

T-slide, female, shackle M5 aisi 316

T-slide, female, shackle M6 aisi 316

Middle bars

PP-VT-500-8

PP-VT-500-10

PP-VT-720-8

PP-VT-720-10

Information

length 500mm, Ø 8mm

length 500mm, Ø 10mm

length 720mm, Ø 8mm

length 720mm, Ø 10mm

Packer heads

PP-D30-AL

PP-D40-AL

PP-D60-AL

APC-1/4

APP-1/4

Information

packer head Ø 30mm, aluminium

packer head Ø 40mm, aluminium

packer head Ø 60mm, aluminium

air pressure connector, accessory

air pressure plug G¼, accessory

PP-D40-720-10

ADAPTERS & ACCESSORIES

24

How to Buy EquipmentRenssi® Equipment includes all tools you’ll need for relining pipes. We have presses, inversion drums, a machine and a clutch.

There are multiple sizes of inversion drum and press models which make them suitable for various types and sizes of pipes. Smaller models, Renssi® Machine and the clutch are designed to use for cleaning and relining pipelines of an appartment. Large models can be used for relining larger complexes of many appartments. Drum heads help you to use right size liner for the pipe. All products are made of quality materials and we are constantly developing each model to be more efficient and accurate for your convenience. cleaning plastic pipes.

RP CLT RID RCMTool's identificationEvery tool has it’s own code which is used when ordering. Equipment are found under codes RP, CLT, RID and RCM. Accessories for the equipment are found under codeC CAT, CRS, RID and DH.

25

RP CLT RID RCMCAT CRS DH

Accessories of the EquipmentAccessories of the equipment are sold separately. Accessories’ main goal is to make working with tool more efficient. Clutch spare parts and drum heads of inversion drums ease the use and give multiple choices to working.

26

PRESS

Product code

RP-325

RP-475

Information

325 mm wide, up to Ø 200mm liner

475 mm wide, up to Ø 300mm liner

RENSSI® PRESS

If you need a metric steel measure, you can order it separately.

RP-325

Epoxy spreads smoothly on the liner with Renssi® Press. Smoothly spread epoxy on the surfaces of the liner ables successful relining, which repairs

pipe’s surface damages and protects the pipe being damaged for a long time.

INFO

26

27

ADJUSTABLE CLUTCH

CLT-001

The clutch is used as an accessory for a drill when rotating a cable with a chain

knocker on it. The clutch prevents the cable

of breaking down and also personal injuries, if the tool

gets stuck in the pipe while rotating.

INFO

CAT-set

27

CRS-011

Product code

CLT-001

Information

Clutch for a drill

ADJUSTABLE CLUTCH and Spare parts

Includes sleeves for 8mm, 10mm and 12mm cables. Includes also clutch keys and a clutch rotator sleeve. The drill is sold separately.

* Includes sleeves for 8mm, 10mm and 12mm cables.

Spare parts

CLT-25-002-S

CLT-25-006-S

CLT-25-014

CAT-44

CAT-001

CAT-set

CRS-011

T-slide 16mm adapter, male

Adapter for 6mm cable

Adapter for 14mm cable*

Clutch adjusting tool

Hexagonal clutch adjusting tool

CAT-44 + CAT-001 set

Clutch rotator sleeve

28

RID-400

Inversion Drums are used in the pipe relining. Pneumatic features of the inversion drum shoot the liner smoothly into a pipe which is important in achieving a successful result.

INFO

INVERSION DRUMS28

Inversion Drum Model RID-400 is a hybrid, which means that you can attach this model into an accesory bracket RID-400-BR by removing it from its cart. This ability is not

available in other models.

RID-400 INFO

29

RID-800

INVERSION DRUMS

Information

Ø 200 mm

Ø 300 mm

Ø 400 mm

Ø 600 mm

Ø 800 mm

Product code

RID-200

RID-300

RID-400

RID-600

RID-800

INVERSION DRUMS29

Accessory

RID-400-BR

Information

bracket to RID-400

RID-400 + RID-400-BR

RID-400-BR ATTACHMENT

30

Information

for Ø 50mm liner

for Ø 70mm liner

for Ø 100mm liner

for Ø 150mm liner

Product code

DH-6S-50

DH-6S-70

DH-6S-100

DH-6S-150

DRUM HEADS with 6” thread attachment

This product is not available in our stock. We will start production after receiving the order.

Information

4” Storz adapter / thread

6” Storz adapter / thread

Product code

DH-4S

DH-6S

DRUM HEAD Storz adapters

DRUM HEADS

DH-4S

Information

for Ø 50mm liner

for Ø 70mm liner

for Ø 100mm liner

Product code

DH-4S-50

DH-4S-70

DH-4S-100

DRUM HEADS with 4” thread attachment

30

Custom drum heads can be manufactured by customer’s needs. Minimum order is 15 pcs.

CUSTOM DRUM HEADS

DH-4S COLLECTION

DH-6S + DH-6S-100

31

DH-6S

DH-6Z/R2-150

31

DRUMHEAD ATTACHED

Drum Head is an accessory of the inversion drum.

It ables a versatile use of drums in relining.

INFO

32

RENSSI MACHINE

Product code

RCM-10

RCM-20

RCM-35

Information

cleaning unit with 10m of Ø 10mm cable

RENSSI® MACHINE

RENSSI® Machine comes with Bosch 21-2-RCT drill, Renssi CLT-001 clutch and 10 meters of 10mm cable.

You can connect Renssi® chainscrapers, brushes and cutters to this machine, depending on your current job.

INFO

33

RENSSI MACHINERCM-10

34

How to Buy CablesThere are two types of cables that we are offering to ourcustomer; Cross Layer and Spring Layer cable. There are a few differences between cables and you are welcome to ask more about their features from us.You have an option to choose ready-to-use TC- and TS- cables, which includes a cover, cable and T-slide adapters and/or a sleeve, or you can also order cables and covers separately. All you need to know is the length and diameter of the cable and you are ready to choose the cable of your needs.

TC-2001,5Cable size Ø 1 / 008 = 8mm 2 / 010 = 10mm3 / 012 = 12mm

004 = 4mm

005 = 5mm

006 = 6mm

Tool’s identificationEvery tool has it’s own code which is used when ordering. Cables are found under codes TC, TS, RC and RCC. Cable accessories are found under code CCB.TC is a ready-to-use cable with a ballbearing and female/male t-slide ends.

Cable length (m)Cable’s length is determinated after its size value. 001,5 = 1,5 m

35

TS-2001,5Cable size Ø 1 / 008 = 8mm 2 / 010 = 10mm3 / 012 = 12mm

004 = 4mm

005 = 5mm

006 = 6mm

Tool’s identificationEvery tool has it’s own code which is used when ordering. Cables are found under codes TC, TS, RC and RCC. Cable accessories are found under code CCB.TS is a ready to use cable with a ballbearing and a sleeve head.

Cable length (m)Cable’s length is determinated after its size value. 001,5 = 1,5 m

36

T-SLIDE ADAPTERS AND A BALLBEARING INCLUDED IN TC CABLES

Product code

TC-1001

TC-1002

TC-1003

TC-1005

TC-1006

TC-1008

TC-1010

TC-1015

TC-1020

TC 1000 SERIES 8mm cable / adapters 16mm

Length (m)

1 m

2 m

3 m

5 m

6 m

8 m

10 m

15 m

20 m

We sell ready-to-use T-cables and cables and covers separately for customer's needs. TC-cables includes a cover, a cable, a ballbearing and T-slide adapters.We use Cross Layer Cable in TC Cables.

TC CABLES

Product code

TC-2001

TC-2002

TC-2003

TC-2005

TC-2006

TC-2008

TC-2010

TC-2015

TC-2020

TC 2000 SERIES 10mm cable / adapters 16mm

Length (m)

1 m

2 m

3 m

5 m

6 m

8 m

10 m

15 m

20 m

Product code

TC-3001

TC-3002

TC-3003

TC-3005

TC-3006

TC-3008

TC-3010

TC-3015

TC-3020

TC 3000 SERIES 12mm cable / adapters 20mm

Length (m)

1 m

2 m

3 m

5 m

6 m

8 m

10 m

15 m

20 m

36

37

Product code

TS-1001

TS-1002

TS-1003

TS-1005

TS-1006

TS-1008

TS-1010

TS-1015

TS-1020

TS 1000 SERIES 8mm cable

Length (m)

1 m

2 m

3 m

5 m

6 m

8 m

10 m

15 m

20 m

Product code

TS-2001

TS-2002

TS-2003

TS-2005

TS-2006

TS-2008

TS-2010

TS-2015

TS-2020

TS 2000 SERIES 10mm cable

Length (m)

1 m

2 m

3 m

5 m

6 m

8 m

10 m

15 m

20 m

Product code

TS-3001

TS-3002

TS-3003

TS-3005

TS-3006

TS-3008

TS-3010

TS-3015

TS-3020

TS 3000 SERIES 12mm cable

Length (m)

1 m

2 m

3 m

5 m

6 m

8 m

10 m

15 m

20 m

We sell ready-to-use T-cables and cables and covers separately for customer's needs. TS-cables includes a cover, a cable, a ballbearing and a steel sleeve.We use Cross Layer Cable in TS Cables.

TS CABLES

A BALLBEARING AND A STEEL SLEEVE INCLUDED IN TS CABLES

37

38

COVERS ROTATING CABLES

CABLE

1.

2.

CABLES FOR EFFECTIVE USE:1. Cross Layer Cable2. Spring Layer Cable

INFO

38

Product code

RCC-06/08-N

RCC-08/10-N

RCC-10/12,5-N

RCC-12,5/15-N

RCC -13,5/16-N

Information

for 4mm cable

for 6mm cable

for 8mm cable

for 10mm cable

for 12mm cable

Product code

RC-004-1

RC-006-1

RC-008-1

RC-008-2

RC-010-1

RC-010-2

RC-012-1

RC-012-2

Diameter Ø

Ø 4mm

Ø 6mm

Ø 8mm

Ø 8mm

Ø 10mm

Ø 10mm

Ø 12mm

Ø 12mm

39

BALLBEARINGS

Product size

8mm cable / 12mm cover

10mm cable / 15mm cover

12mm cable / 16mm cover

12mm cable / 20mm cover

tool for CB-D8/ -D10/ -D12

tool for CBP-12

CABLE COVER BALLBEARINGS

Product code

CB-D8

CB-D10

CB-D12

CBP-D12

CBT-20

CBT-24

BALLBEARING KEYS CBT-20 and CBT-24

ROTATING CABLES

METRIC ALLEN KEYS

Product code

RAK-set

Metric Allen Keys for Renssi® Tools. Includes 2.0, 2.5, 3.0, 4.0 , 5.0, 6.0 allen keys.

Product code

six metric allen keys set

METRIC ALLEN KEYS

39

40

Prices EXW our stock. All rights reserved.Printed out on January 2017

CONTACT

Renssi Finland Oyaddr. Lautamiehenkatu 1,20780 Kaarina FINLANDe-mail. info@renssi.comwww.renssi.com

ARE YOU READY TO BUY RENSSI TOOLS?