Product Data Sheets Effective: August 21, 2013
Summit Industrial Products
9010 CR 2120 ~ Tyler, TX 75707 P.O. Box 131369 ~ Tyler, TX 775713
Phone: 903.534.8021 Toll Free: 800.749.5823 ~ Fax: 800.749.1375
www.klsummit.comwww.sublimedescaler.com [email protected]
http://distributors.klsummit.com
Prod
uct D
ata
Shee
tN
OT
E: T
he in
form
atio
n in
this
pub
licat
ion
is th
e re
sult
of c
aref
ul te
stin
g in
our
labo
rato
ries,
com
plem
ente
d by
sel
ecte
d lit
erat
ure.
It d
oes
not i
n an
y w
ay c
onst
itute
a g
uara
ntee
, nor
doe
s it
serv
e as
a li
cens
e to
ope
rate
any
pat
ent.
Due
to w
idel
yva
ryin
g co
nditi
ons
of p
rodu
ct u
se, w
hich
are
bey
ond
our c
ontro
l, it
is s
trong
ly re
com
men
ded
that
the
prod
uct b
e te
sted
for s
uita
bilit
y. P
rodu
ct ty
pica
l pro
perti
es in
this
pub
licat
ion
are
curr
ent a
s of
May
13,
200
2.
P.O
. Box
131
359
• Tyl
er, T
exas
757
13, P
hone
903
.534
.802
1 • F
ax 9
03.5
81.4
376
May
13,
200
2
ALIMEXA WATER SCALE SOLVENT SAFE FOR ALUMINUM
Alimex is a water-based chemical formulated to safely clean lime scale and corrosionfrom water-wetted surfaces. It contains wetting agents, corrosion inhibitors anddegreasing compounds to help penetrate and carry away the scale and corrosion. Thisproduct is specifically designed to be used on equipment that contains aluminum thatcannot be safely cleaned with other scale removing compounds.
When used as directed, Alimex is non-corrosive and will not affect the following met-als: aluminum, stainless steel, carbon steel, brass, admiralty metal, copper, iron, lead,PVC plastic, polyethylene, rubber, leather, and most other materials found in water-wetted equipment. Alimex is not recommended for zinc, galvanized steel, or alloys ofmagnesium.
This product is non-toxic, non-corrosive, and non-flammable when used as directed.It is biodegradable and can be safely put to the sewer in the spent condition.
Alimex has a built-in indicator which changes color when the solution is 95+ percentspent. When the solution begins to turn blue, it should be added to or changed if theequipment is not clean.
DIRECTIONSAlimex is designed to be used at ambient temperatures above 35ºF. It is most effec-tive when circulated through the equipment to be cleaned. When possible, circulationshould be up-flow. Alimex can also be used by filling the equipment to be cleaned andallowing it to set until the scale disappears. When cleaning exposed surfaces (such asfin fan coolers), Alimex should be periodically sprayed on the surface until the scaledisappears. In all cases, fresh water should be used to rinse the clean surface free ofAlimex. The cleaning operation normally takes two to six hours. The equipmentshould be vented at all times since carbon dioxide (CO2) gas evolves during the disas-sociation of lime scale.
When the cleaning process is complete, the system should be completely drained andflushed with fresh water.
PHYSICAL PROPERTIESSpecific Gravity 1.162Freezing Point 28.4ºFBoiling Point 208ºFFlash Point NoneTemperature of Reaction Negligible
Recommended operating pressure is atmospheric and recommended operatingtemperature range is:Minimum 40ºFOptimum 80ºFMaximum 140ºF
WATER SCALE SOLVENT
Page 1 of 2
METHOD OF APPLICATION
Alimex solution is most effectively used by circulating it through the equipment to be cleaned.When possible, circulation should be up flow. The equipment should be vented at all timessince carbon dioxide (CO2) gas is liberated from the disassociation of the lime scale.
ALIMEX PUMP AND HOSE HOOK-UP
Page 2 of 2
Prod
uct D
ata
Shee
tN
OT
E: T
he in
form
atio
n in
this
pub
licat
ion
is th
e re
sult
of c
aref
ul te
stin
g in
our
labo
rato
ries,
com
plem
ente
d by
sel
ecte
d lit
erat
ure.
It d
oes
not i
n an
y w
ay c
onst
itute
a g
uara
ntee
, nor
doe
s it
serv
e as
a li
cens
e to
ope
rate
any
pat
ent.
Due
to w
idel
yva
ryin
g co
nditi
ons
of p
rodu
ct u
se, w
hich
are
bey
ond
our c
ontro
l, it
is s
trong
ly re
com
men
ded
that
the
prod
uct b
e te
sted
for s
uita
bilit
y. P
rodu
ct ty
pica
l pro
perti
es in
this
pub
licat
ion
are
curr
ent a
s of
May
13,
200
2.
P.O
. Box
131
359
• Tyl
er, C
R 2
120,
Tex
as 7
5713
, Pho
ne 9
03.5
34.8
021
• Fax
903
.581
.437
6SYNTHETIC AIR COMPRESSOR
AU-46 Silicone Based Fluid
AU-46 is a silicone-based fluid designed for use in rotaryscrew compressors. AU-46 does not break downunder normal operating temperatures and pressures therebyeliminating carbon deposits, sludge and varnish formations.The system stays clean of lubricant by-products resulting inlower maintenance costs. The high viscosity index insuresa minimum change in viscosity over the compressor'stemperature range. AU-46 has excellent water separation,corrosion protection and lubricity characteristics.
Physical PropertiesPRODUCTS AU-46
Appearance Clear, water-white fluid
Viscosity @ -28°C, cSt 214@ 25°C, cSt 50.8 @ 40°C, cSt 37.9@ 100°C, cSt 15.5
Viscosity Index 422Specific Gravity 0.97 Density lbs/gal 8.08Flash Point, °F (°C) 480 (249)Fire Point, °F (°C) 550 (288)Pour Point, °F (°C) -65 (-54)Autoignition Temperature, °F (°C) 800 (427)
May
13,
200
2
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, T
exas
75713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Septe
mber
5,
2012
SYNTHETIC BARRIER FLUIDS
BARRIER FLUID E Summit Barrier Fluid E is formulated from the highest quality syn-thetic base stocks and fortified with additives to provide anon-reactive, oxidatively stable fluid for seal service over anextremely wide temperature range. This fluid has an excellent lowtemperature fluidity and high temperature stability property as wellas the ability to efficiently transfer heat, and keep the seal face cool.Summit Barrier Fluid E does not contain components that areknown catalyst poisons, and are compatible with most commonlyused seal materials
This lubricant is NSF Registered and meets USDA 1998 (H1) guide-lines (lubricants with incidental food contact) for use in food plants.Summit is an ISO 21469 certified facility. Do not add directly to food.
Physical PropertiesBARRIER FLUID E
Viscosity
@ 40°C, cSt 31.0
@ 100°C, cSt 5.9
Specific Gravity 0.825
Flash Point, ºF (ºC) 455 (235)
Pour Point, ºF (ºC) -78 (-61)
Copper Strip Corrosion 1A
Emulsion Tendency 40/40/0 (10)
NSF Registered H1
ISO 21469 Yes
Kosher Yes
Halal Yes
CFIA Yes
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
Viscosity
@ 40°C, cSt 5.1 16.9 30.5 46.0 66.0
@ 100°C, cSt 1.7 3.9 5.9 7.8 10.0
Pour Point, ºF (ºC) -103(-75) -99(-73) -78(-61) -42(-41) -71(-57)
Flash Point, ºF (ºC) 305(152) 425(219) 460(238) 495(257) 510(266)
Specific Gravity 0.798 0.820 0.827 0.833 0.835
Copper Strip Corrosion 1A 1A 1A 1A 1A
Emulsion Tendency 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0(10) (10) (10) (10) (10)
NSF Registered H1 H1 H1 H1 H1
ISO 21469 Yes Pending Pending Pending Pending
Kosher Yes Yes Yes Yes Yes
Halal Yes Yes Yes Yes Yes
CFIA Yes Yes Yes Yes Yes
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, T
exas
75713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Septe
mber
5,
2012
SYNTHETIC BARRIER FLUIDS
BARRIER FLUID SERIES Summit Barrier Fluid Series lubricants are formulated from thehighest quality synthetic base stocks and fortified with additives toprovide a non-reactive, oxidatively stable fluid for seal serviceover an extremely wide temperature range. These fluids haveexcellent low temperature fluidity and high temperature stabilityproperties as well as the ability to efficiently transfer heat, andkeep the seal face cool. Summit’s Barrier Fluid Series lubricantsdo not contain components that are known catalyst poisons, andare compatible with most commonly used seal materials. BarrierFluid 5 is environmentally safe and readily biodegradable accord-ing to OECD 301B.
Barrier Fluid Series products are NSF Registered and meet USDA1998 (H1) guidelines (lubricants with incidental food contact) for usein food plants. Do not add directly to food. Summit is an ISO 21469certified facility.
Physical PropertiesBARRIER FLUIDS 5 17 30 46 68
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es, co
mple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itu
te a
guar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y v
aryin
g
condit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120, T
exas
75713, P
hone
903.5
34.8
021 •
Fax
903.5
81.4
376
PUMP/VACUUM PUMP
CentriPump PPO SeriesSummit CentriPump PPO Series lubricants are a blend of premiumsynthetic and petroleum base fluids specially designed for centrifugalpump applications. The CentriPump PPO Series offers superiorrust and corrosion properties, oxidation life and anti-wear protection.They are exceptional at controlling sludge and deposits which resultsin lower operating temperatures and extended oil drain intervals.
CentriPump PPO Series lubricants are compatible with commonlyused seal and gasket materials.
PRODUCTS PPO-32 PPO-46 PPO-68 PPO-100
ISO Grade 32 46 68 100
Viscosity
@ 40°C, cSt 29.6 45.9 64.4 101.2
@100°C, cSt 5.12 6.8 8.6 11.2
@100°F, SUS 153 237 329 505
@210°F, SUS 43.4 48.6 54.2 63.7
Viscosity Index 105 101 105 96
Flash Point, °F (°C) 450(232) 470(243) 485(252) 515(268)
Pour Point, °F (°C) -35(-37) -36(-38) -29(-34) -31(-35)
Emulsion Tendency 40/40/0 40/40/0 40/40/0 40/40/0
(10 mins) (15 mins) (15 mins) (15 mins)
RPVOT, Avg. Min. 1948 2094 2094 2094
Four Ball Wear Test, 0.51 0.45 0.65 0.55
Mm 1200 rpm,167°F,
40 kg
Physical Properties
August
6,
2013
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es, co
mple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itu
te a
guar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y v
aryin
g
condit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120, T
exas
75713, P
hone
903.5
34.8
021 •
Fax
903.5
81.4
376
PRODUCTS SPO-32 SPO-46 SPO-68 SPO-100
ISO Grade 32 46 68 100
Viscosity
@ 40°C, cSt 32.0 43.2 64.0 96.6
@100°C, cSt 5.80 7.34 10.0 13.2
@100°F, SUS 163 220 339 482
@210°F, SUS 45.7 50.4 59.6 69.8
Viscosity Index 130 134 138 134
Flash Point, °F (°C) 505(263) 525(273) 515(268) 540(282)
Pour Point, °F (°C) -60(-51) -40(-40) -44(-42) -45(-43)
Emulsion Tendency 40/40/0 40/40/0 40/40/0 40/40/0
(10 mins) (10 mins) (15 mins) (10 mins)
RPVOT, Avg. Min. 2740 2710 2548 2940
Four Ball Wear Test, 0.47 0.42 0.41 0.47
Mm 1200 rpm,167°F,
40 kg
Physical Properties
August
6,
2013
PUMP/VACUUM PUMP
CentriPump SPO SeriesSummit CentriPump SPO Series lubricants are manufactured fromthe highest quality PAO (polyalphaolefin) base stocks and advancedadditive technology. CentriPump SPO Series lubricants are recom-mended for centrifugal pumps and present many advantages overpetroleum-based lubricants as well as other popular synthetic basedproducts. The CentriPump SPO Series offers superior oxidation lifeand excellent wear protection. In addition, they have low pourpoints, high viscosity indices and excellent water demulsibility.
CentriPump SPO Series lubricants are compatible with commonlyused seal materials and equipment designed for use with petroleumoils.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
May 1
3,
2002
PREMIUM SYNTHETIC BLEND OVEN CONVEYOR
CO-150 Tenter Chain OilSummit CO-150 chain oil is a unique blend of the highestquality petroleum oil available today and selected syntheticbase stocks. This blend contains an additive systemformulated to meet the demanding requirements for a tenterchain lubricant.
The formulation of Summit CO-150 incorporates an additivesystem that provides the following benefits to tenter chains:
1. Excellent anti-wear properties to prolong chain life
2. A viscosity for spraying the lubricant onto the chain
3. High temperature capabilities
4. Cleaning of the chain as it operates
5. Anti-oxidants to reduce gumming and thickening
6. Water insoluble
7. Adheres to the chain
8. Penetration
Physical PropertiesCharacteristic Typical Performance
Viscosity
@ 100°F, cSt 111.2
@ 210°F, cSt 13.7
@ 100°F, SUS 515
@ 210°F, SUS 72.5
Viscosity Index 132
Flash Point, °F (ºC) 475 (246)
Fire Point, °F (ºC) 515 (268)
Pour Point, °F (ºC) -10 (-23)
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Novem
ber
4,
2010
Physical PropertiesCharacteristic Typical Performance
Base Oil Ester
Color Yellow-orange, transparent
Specific Gravity 20°C 0.912
Refractive Index 1.488
Service Temp. Range, °C -30 to 250
Flash Point, ºF (°C) 446 (230)
Pour Point, ºF (°C) -31 (-35)
Kinematic Viscosity
@ 20°C, cSt 800
@ 40°C, cSt 260
@ 100°C, cSt 30
Viscosity Index 150
Evaporation Loss
1°K/min, (% weight loss)
120°C 0.3
160°C 0.9
200°C 3.3
240°C 10.9
Four Ball Test Machine
welding load, (N) 2400
wear scar
1 hour at 150 N, (mm) 0.2
1 hour at 400 N, (mm) 0.3
NSF Registered H2
CO-250 High Temp Chain OilSummit CO-250 was specifically developed for high temperatureroller chains operating at temperatures in excess of 200ºC.CO-250 should be used for the chains, steel belts and heatedpress platens found in continuous particle board and woodlaminate machinery.
SYNTHETIC OVEN CONVEYOR CHAIN LUBRICANT
FEATURE BENEFIT
Special synthetic base oil Prevents residue build-up.
High temperature stability Offers effective lubrication at
high temperatures.
Low evaporation rate Minimizes oil consumption.
High wear protection Increases chain life.
Good spreadability Enables oil to penetrate extremely
narrow gaps at the lubrication point.
METHOD OF APPLICATION: Automatic lubrication systems are recommended.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y v
aryin
g
condit
ions
of
pro
du
ct u
se,
whic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Octo
ber
14,
2010
SYNTHETIC BLEND OVEN CONVEYOR CHAIN OIL
CO-400 High Temp Chain OilSummit CO-400 High Temperature Chain Oil is a uniqueformulation of special ester base stocks and the latest additivetechnology. CO-400 has an exceptionally high smoke pointand is capable of penetrating and removing carbonaceousdeposits and inhibiting the formation of solid buildup. It iseffective over a broad temperature range and results in lowerpower consumption under varying load conditions.
APPLICATIONS:
Summit CO-400 High Temperature Chain Oil is recommended for
use in the following applications:
•High Temperature Process Ovens •Drying Operations
•Can and Fibre Board Lines •Glass Fibre Ovens
•Extrusion Paint Lines •Multi-Purpose E.P. Gears
•Tenter Frames
•Open Bearings and many other Roller Chain Operations requiring
a lubricant with excellent heat stability
Physical PropertiesCharacteristic Typical Performance
ISO Grade 150
Viscosity
@ 100°F, cSt 154.8
@ 210ºF, cSt 19.05
@ 100°F, SUS 717
@ 210ºF, SUS 94.48
Viscosity Index 150
Pour Point, °F (ºC) -60 (-51)
Flash Point, °F (ºC) 575 (302)
Specific Gravity 0.911
Density, lbs/gal 7.59
NSF Registered H2
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Novem
ber
4,
2010
Characteristic Typical Performance
Base Oil Ester
Color Light Brown, Clear
Specific Gravity 0.95
Service Temp. Range, (°F) 32(°F) - 480(°F)
Flash Point, °F (ºC) >536 (280)
Pour Point, °F (ºC) -31 (-34)
Kinematic Viscosity
@ 20°C, cSt 300
@ 40°C, cSt 95
@ 100°C, cSt 12
Viscosity Index 118
EVAPORATION LOSS
1°K/min, (% weight loss)
120°C 0.2
140°C 0.2
160°C 0.5
180°C 0.5
200°C 1.8
220°C 2.8
240°C 4.8
260°C 13.1
NSF Registered H2
SYNTHETIC OVEN CONVEYOR CHAIN LUBRICANT
CO-95 High Temp Chain OilSummit CO-95 High Temperature Chain Lubricant wasdeveloped specifically for the conveyor chains used in fiber-glass, rockwool, and gypsum ovens. It is a proven qualityhigh temperature roller chain lubricant.
Method of Application:Automatic lubrication systems are recommended.
Feature BenefitSynthetic oil Prevents residue build-up.
High temperature stability Offers effective lubrication at
high temperatures.
Low evaporation rate Reduced lubricant consumption.
High wear protection Increased chain life.
High flash point Reduces oven fire likelihood.
Physical Properties
Viscosity:
@ 40°C, cSt 86
@ 100°C, cSt 8.5
@ 100°F, SUS 454
@ 210°F, SUS 54.9
Viscosity Index 55
Pour Point, °F (°C) -29 (-33)
Flash Point, °F (°C) 444 (229)
Autoignition Point, °F (°C) 790 (421)
Copper Corrosion 1AProd
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f Ja
nuar
y 2
7,
2011.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC COMPRESSOR
DSL®-100SSummit DSL®-100S is formulated from diester base stocks andemploys state-of-the-art additive technology to provide an out-standing lubricant for high pressure compressors.
Summit DSL®-100S is an excellent lubricant for the followingapplications: • High pressure Seismic compressors• Reciprocating compressor cylinders• Low and High temperature lubrication• General lubrication
Summit DSL®-100S can be used as a flushing oil where the com-pressor needs to be flushed while running under load. It does notcontain polymers commonly used as thickeners in ester based oils.
Physical Properties
January
27,
2011
PRODUCT DSL®-100S
SPECIAL NOTE: Summit DSL® lubricants are not compatible with almost all
elastomers used in compressors and pumps including the paint used in crankcases.
Consult the Material Compatibility Guide for specific recommendations.
Pro
du
ct
Data
Sh
ee
tN
ot
e:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f Ju
ne
19,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Octo
be
r 1
3,
20
10
ISO Viscosity Grade 220
Viscosity:
@ 40°C, cSt 227
@ 100°C, cSt 27.5
@ 100°F, SUS 1450
@ 210°F, SUS 133.9
Viscosity Index 131
Specific Gravity 0.912
Density lbs/gal 7.605
Pour Point, °F (°C) -38 (-39)
Flash Point, °F (°C) 510 (266)
Autoignition Point,
°F (°C) 790 (421)
Copper Corrosion 1A
Special Note: Summit DSl®1220 lubricant is not compatible
with some elastomers used in compressors and pumps includingsome paint used in crankcases. Consult the MaterialCompatibility Guide for specific recommendations.
SYNTHETIC AIR COMPRESSOR
DSL®-1220Summit DSL
®-1220 is formulated from the best diester base
stocks available and employs state-of-the-art additive technology
to provide an outstanding lubricant
Summit DSL®-1220 is an excellent lubricant for the following
applications:
• Reciprocating compressor cylinders
• Low and High temperature lubrication
• General lubrication
Physical PropertiesPRODUCTS DSL®-1220
Prod
uct D
ata
Shee
t DSL®
SERIES LubricantsSummit DSL ® synthet ic lubricants are unique combinations of quality diester basestocks and the latest additive technology.
Summit provides a wide range of DSL® lubricants that cover applications for rotary vane,
rotary screw, and all ages and design types of reciprocating
compressors.
Summit DSL® lubricants are especially noted for the following benefits:•Low temperature fluidity
•Better thermal conductivity-reduces operating temperature
•Reduced friction – approximately 20% lower coefficient of friction.
•High temperature thermal stability will not disassociate under thermal stress.
•Greater resistance to mechanical stress will not shear under heavy loads or extreme stress.
•Reduced metal-to-metal wear-polar properties provided better metal wetting
•Better demulsibility characteristics-moisture separates readily, providing better rust and
corrosion protection.
•More energy efficiency.
These lubricants are designed for use in the crankcase and as a cylinder lubricant. They are
compatible with almost all elastomers used in compressors and pumps, including paint used
in crankcases.
COMPATIBILITY:
The following materials are compatible for use with DSL® lubricants:
Epoxy Paint, Celcon, Viton®, High Nitrile Rubber (Buna N, NBR-greater than 36%
Acrylonitrile), Medium Nitrile Rubber (Buna N, NBR 30-36% Acrylonitrile), Teflon®, Oil
Resistant Alkyd, and Nylon.
SYNTHETIC AIR COMPRESSOR
Summit DSL®-32 is recommended foruse in the following applications:
Centrifugal CompressorsCertain rotary screw & vane com-
pressorsLow temperature lubricationHigh temperature lubricationGeneral lubrication for applications
requiring an ISO 32 lubricant
Summit DSL®-68 is recommended foruse in the following applications:
Rotary screw and vane compressorsBall and roller bearingsLow temperature lubricationHigh temperature lubricationMist lubrication systemsGeneral lubrication for applications
requiring an ISO 68 lubricant
Summit DSL®-100 is recommended foruse in the following applications:
Reciprocating compressorsRotary vane compressorsBall and roller bearingsLow temperature lubricationHigh temperature lubricationGeneral lubrication for applications
requiring an ISO 100 lubricant
Summit DSL®-125 and DSL®-150 arerecommended for the following applica-tions:
Reciprocating compressorsRotary vane compressorsBall and roller bearingsLow temperature lubricationHigh temperature lubricationGeneral lubrication for applications
requiring an ISO 150 lubricant
Page 1 of 2
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f Ju
ne
28,
2007.
P.O
. B
ox 1
31359 •
Tyle
r, T
exas
75713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
ISO
Vis
cosity G
rade
32
46
68
100
125
150
Vis
cosity:
@ 4
0°C
, cS
t
30.5
42.0
64.0
97.0
125
154
@ 1
00°C
, cS
t
4.9
05.7
48.3
010.8
13.3
15.5
Vis
cosity I
ndex
73
66
97
94
103
101
Specific
Gra
vity
0.9
41
0.9
65
0.9
64
0.9
61
0.9
57
0.9
56
Density lbs/g
al
7.8
37
8.0
37
8.0
37
8.0
08
7.9
75
7.9
62
Pour
Poin
t, °
F(°
C)
-65 (
-54)
-65 (
-54)
-40 (
-40)
-30 (
-34)
-38 (
-39)
-30 (
-34)
Fla
sh P
oin
t, °
F(°
C)
490 (
254)
475 (
246)
490 (
254)
495 (
257)
495 (
257)
505 (
263)
Auto
ignitio
n P
oin
t ,°F
(°C
)765 (
407)
720 (
373)
765
(407)
780
(416)
785
(418)
785
(418)
Copper
Corr
osio
n
1A
1A
1A
1A
1A
1A
*DS
L®125 f
alls
betw
een t
he I
SO
-100 a
nd I
SO
150 v
iscosity r
ange.
DS
L®1220 A
vaila
ble
upon r
equest
SYNTHETIC AIR COMPRESSOR
DSL®
SERIES (Diester)
PR
OD
UC
TS
DS
L®-3
2D
SL
®-4
6D
SL
®-6
8D
SL
®-1
00
DS
L®-1
25
DS
L®-1
50
DS
L®
SE
RIE
S (
Die
ste
r) P
hy
sic
al
Pro
pe
rtie
s
SPECIAL NOTE: Summit DSL® lubricants are not compatiblewith some elastomers used in compressors and pumps includingsome paint used in crankcases. Consult the Material CompatibilityGuide for specific recommendations.
June 2
8.
2007
Pro
du
ct
Data
Sh
ee
tN
ot
e:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f O
ctober
14,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC PROCESS GAS COMPRESSOR
DSL®-100XM Summit DSL
®-100XM is formulated from the best diester base
stocks available and employ state of the art additive technology toprovide outstanding lubricants. DSL
®-100XM is approved by
U.O.P. for hydrogen compressor service associated with theircatalytic processes. Please consult your Summit distributor foradditional information.
Summit DSl®-100XM is recommended for use in the following
applications: centrifugal compressors, reciprocating compressors,
rotary screw compressors, vane compressors, air tools, ball and
roller bearings, mist, and low temperature lubrication.
Physical Properties
Octo
ber
14,
2010
ISO Viscosity Grade 100
Viscosity:
@ 40°C, cSt 98.5
@ 100°C, cSt 10.9
@ 100°F, SUS 514
@ 210°F, SUS 63.5
Viscosity Index 94
Specific Gravity 0.9610
Density lbs/gal 8.008
Pour Point, °F (°C) -30 (-34)
Flash Point, °F (°C) 465 (241)
Autoignition Point, °F (°C) 780 (416)
Copper Corrosion 1A
Conradson Carbon 0.02
Rust Pass
Special Note: Summit DSl® lubricants are not compatible with almost all
elastomers used in compressors and pumps including the paint used in crankcases.
Consult the Material Compatibility Guide for specific recommendations.
PRODUCTS DSL®-100XM
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f N
ovem
ber
14,
2007.
P.O
. B
ox 1
31359 •
Tyle
r, T
exas
75713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Novem
ber
14,
2007
BIODEGRADABLE TRACTOR HYDRAULIC OIL
ENVIROTECH® ALL-TRACEnviroTech® All-Trac is an environmentally responsible universal lubricantfor farm equipment, off-highway machinery, and industrial tractors. Thismultifunctional biobased fluid is designed for equipment requiring onelubricant for the transmission, final drive, wet brakes and hydraulic systems.It meets or exceeds the performance requirements of all major brands offarm tractors and other farm equipment that utilize a common fluid reservoir.EnviroTech® All-Trac is formulated with special friction modifiers toensure proper operation of wet brakes and transmission clutch packs. Thevegetable based formulation provides superior oxidation resistance,excellent wear protection, protects against rust and corrosion, and hasexceptional anti-foam characteristics. EnviroTech® All-Trac meets orexceeds the requirements for ATD Allison C-4, Caterpillar TO-2 and isrecommended for use where the equipment manufacturer specifies thefollowing:
CASE INTERNATIONAL
JIC-145/MS-1210
JIC-185/MS-1204
MS-1205, MS-1127,
MS1129-A, M1135, M1141
DEUTZ-ALLIS
FIAT-HESSTON
FORD
M2C134-D
M2C86-C, M2C86-B
FORD
M2C41-B, M2C48-B
M2C53-A, M2C134-A
M2C134-B, M2C134-C
JOHN DEERE
J20C, J14A
Quatrol™
J20D
Hygard
KUBOTA
LANDINI
MASSEY-FERGUSON
MS-1205, MS-1127,
MS1129-A, M1135, M1141
STEIGER
FORD
VERSATILE
WHITE FARM
Q-1826
Q-1705, Q-1766, Q-1802
Physical PropertiesENVIROTECH® ALL-TRAC
Viscosity
@40°C, cSt 47.8
@100°C, cSt 10.26
Brookfield Viscosity
@-20°C 1650
@-35°C 11,150
Viscosity Index 210
Flash Point, °F, (°C) 484 (251)
Stable Pour Point, °F, (°C) -38 (-39)
Biodegradation Classification, ultimate
ASTM D 5864 PW1
Classified as ultimately biodegradable (Pw1) and non-toxic, EnviroTech®All-Trac is ideal for equipment operating in environmentally sensitiveareas.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f N
ovem
ber
3,
2009.
P.O
. B
ox 1
31359 •
Tyle
r, T
exas
75713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Novem
ber
3,
2009
BIOBASED HIGH TEMP CHAIN LUBRICANT
Shelf Life: Product shelf life is 3 years from the date of manufacture, after which
the product should be recertified prior to use.
ENVIROTECH® CO FG Series EnviroTech® CO FG Series chain lubricants are a specially developed,food grade chain lubricants blended from biobased oils and fortified withsynthetic food grade white graphite. This unique high temperature formulalubricates at operating temperatures exceeding 1000ºC and meets U.S.D.A.1998 (H1) guidelines for applications where incidental food contact is possible.It does not contain VOCs and will out-perform other lubricants containing molyb-denum disulfide, black graphite, or Teflon®. In addition, EnviroTech® COFG contains a natural self-cleaning property which cleans the buildup onchains attributable to the use of inferior chain lubricants. This superiorchain lubricant provides excellent protection against wear, rust, oxidation,and corrosion.
APPLICATIONS: Use EnviroTech® CO FG Series for chains exposed to highservice temperatures which exceed those recommended for conventional lubri-cants. This product is ideal for oven chains used in plants which produce bread,cookies, cakes and other baked food products. It is also suitable for can makingwhere decorative coatings are being cured or applied. EnviroTech® CO FG canalso be used in non-food grade high temperature applications.
Physical PropertiesEnviroTech® CO-68 FG CO-150 FG
ISO Grade 68 150
Viscosity (ASTM D-445)
@40ºC 67.5 147.1 cSt
@100ºC 12.5 24.9 cSt
Viscosity Index (ASTM D-2270) 187 203
Flash Point (ASTM D-92) 590ºF /310ºC 595ºF /313ºC
Fire Point (ASTM D-92) 635ºF /335ºC 640ºF/338ºC
Pour Point (ASTM D-97) -18.4ºF/-28ºC -13ºF/-25ºC
Rust Prevention (ASTM D-665) Pass Pass
4 Ball Wear (ASTM D-2266) 0.40 0.40
4 Ball Weld (ASTM D-2783) 160 kg 160 kg
NSF Registered H1 H1
SPECIAL INSTRUCTIONS:Because of the high concentration of white graphite in this chain oil, it needs agitation before use to insure even distribution of the solid lubricant. The whitegraphite has proven to stay in suspension for up to two weeks after being introducedinto a capillary tube supplying lubricant to an applicator.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
du
ct t
ypic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f M
ay 6
, 2009.
P.O
. B
ox 1
31359 •
Tyle
r, T
exas
75713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
May 6
, 2009
BIODEGRADABLE EP GEAR LUBRICANT
ENVIROTECH®
EP GEAR OIL SERIESEnviroTech® EP Gear Oils are environmentally responsible lubricantsdesigned for the protection of gears and bearings in systems where hightemperature and/or extreme pressure conditions exist. It is a vegetablebased formulation recommended for lubricating spur, helical, bevel, andworm gear configurations. These biobased lubricants are intended forheavy-duty applications subject to heavy loading or shock loading.EnviroTech® EP Gear Oils meet or exceed the following performancerequirements:
• U.S. Steel 224• AGMA 9005/250.04• DIN 51517, Part 3• David Brown DB S1.53.101• Cincinnati Machine E.P.
Classified as ultimately biodegradable (Pw1) and non-toxic, EnviroTech®
EP Gear Oils are ideal for equipment operating in environmentally sensitiveareas.
Physical PropertiesEnviroTech® EP-150 EP-220 EP-320 EP-460
ISO Grade, Approximate 150 220 320 460
AGMA #, Approximate 4 EP 5 EP 6 EP 7 EP
Specific Gravity 0.900 0.903 0.900 0.908
Viscosity
@40°C, cSt 131 166 252 382
@100°C, cSt 20 24.1 34 49
Viscosity Index 175 177 182 194
Pour Point °F(°C) -8(-22) -4(-20) 0(-18) 10(-12)
Flash Point °F(°C) (550)288 536(280) 536(280) 536(280)
Copper Corrosion 1A 1A 1A 1A
Rust Test Pass Pass Pass Pass
Timken OK, lbs 70 70 70 70
Four-Ball Wear 0.3 0.3 0.3 0.3
Four-Ball EP Weld Point (kg) 250 250 250 250
Four-Ball EP Load Wear Index 47.86 47.86 47.86 47.86
FZG Test 12 12 12 12
Biodegradation
Classification, ultimate ultimate inherent inherent
ASTM D 5864 PW1 PW1
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f N
ovem
ber
24,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Novem
ber
24,
2010
BIODEGRADABLE FOOD GRADE PENETRATING OIL
ENVIROTECH® FGPL Summit EnviroTech® FGPL is a biobased food grade penetrating
lubricant formulated for use in the food processing industry. This
biodegradable formulation is odorless and tasteless. It is fast
acting and rapidly penetrates corrosion or carbon residue on equip-
ment. It is suitable for use on all metals and alloys. Summit FGPL
can be used on food processing equipment as a protective anti rust
film, as a release agent on gaskets or seals of tank closures and as
a lubricant for machine parts in locations where the potential for
exposure to food exists.
Physical PropertiesEnviroTech® FGPL
Specific Gravity @ 60ºF .88
Viscosity @40ºC 14
Pour Point, ºF(ºC) -13 (-25)
Flash Point, ºF(ºC) 295 (146)
Copper Corrosion Prevention 1A
Rust Prevention
Distilled Water Pass-Clean
Synthetic Sea Water Pass-Clean
Four Ball Wear .40 mm
NSF Registered H1
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
ISO Grade 32 46 68
Specific Gravity 0.875 0.877 0.888
Viscosity
@ 40°C, cSt 31.3 43.5 64.6
@ 100°C, cSt 6.80 9.80 12.73
Viscosity Index 185 220 201
Flash Point, °F (°C) 460 (238) 470 (243) 485 (252)
Fire Point, °F (°C) 505 (263) 510 (266) 520 (271)
Pour Point, °F (°C) -40 (-40) -35 (-37) -30 (-34)
FZG Gear Test, 12 12 12DIN 51354
4-Ball Wear, 0.38 0.35 0.34ASTM D 4172, mm
Biodegradadation ultimate ultimate ultimateClassification,
ASTM D 5864 PW1 PW1 PW1
Emulsion Tendency 40/40/0 40/40/0 40/40/0
ASTM D1401 (10) (10) (10)
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f N
ovem
ber
16,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Novem
ber
16,
2010
Prod
uct D
ata
Shee
t BIODEGRADABLE HYDRAULIC OIL
EnviroTech® H SeriesEnviroTech® hydraulic oils are premium environmentally responsible
hydraulic fluids designed to provide exceptional performance in hydraulicand circulation systems. These vegetable based formulations have been engi-neered to meet or exceed the performance requirements of most hydraulicpump and system manufacturers, while satisfying the rigorous criteria forbiodegradability and toxicity. They offer the anti-wear and film strengthcharacteristics necessary for hydraulic systems operating under high loadand high pressure. EnviroTech® hydraulic oils are inhibited for excellentprotection against rust and corrosion. In addition to their excellent per-formance capability, EnviroTech® hydraulic oils satisfy the requirements forultimate biodegradability and non-toxicity making them an excellent choicefor hydraulic and circulation systems operating in environmentally sensitiveareas. Base oils and additives in these products pass and exceed the acutetoxicity (LC-50) criteria adopted by the U.S. Fish and Wildlife Serviceand the U.S. EPA.EnviroTech® meets the definition of a biobased lubricant as outlined in
section 9001 of The Farm Security and Rural Investment Act (FSRIA) of2002 (Public Law 107-171/ HR 2642) and qualifies for preferred pro-curement by U.S. Federal Agencies as set forth in FSRIA section 9002
Physical PropertiesEnviroTech® H-68H-46H-32
EnviroTech® H Series lubricants do not produce an iridescent appearance
(sheen) on the surface of the water when tested in accordance with the U.S.
Coast Guard Static Sheen Test.
Prod
uct D
ata
Shee
tN
OT
E: T
he in
form
atio
n in
this
pub
licat
ion
is th
e re
sult
of c
aref
ul te
stin
g in
our
labo
rato
ries,
com
plem
ente
d by
sel
ecte
d lit
erat
ure.
It d
oes
not i
n an
y w
ay c
onst
itute
a g
uara
ntee
, nor
doe
s it
serv
e as
a li
cens
e to
ope
rate
any
pat
ent.
Due
to w
idel
yva
ryin
g co
nditi
ons
of p
rodu
ct u
se, w
hich
are
bey
ond
our c
ontro
l, it
is s
trong
ly re
com
men
ded
that
the
prod
uct b
e te
sted
for s
uita
bilit
y. P
rodu
ct ty
pica
l pro
perti
es in
this
pub
licat
ion
are
curr
ent a
s of
Jan
uary
4, 2
005
P.O
. Box
131
359
• Tyl
er, T
exas
757
13, P
hone
903
.534
.802
1 • F
ax 9
03.5
81.4
376
SYNTHETIC AIR COMPRESSOR
FF SERIESSummit FF Series lubricants are formulated from the best diester
base stocks available and employs state-of-the-art additive tech-
nology to provide outstanding high temperature performance in
reciprocating air compressors.
FF-100 and FF-150 are excellent lubricants for the following
applications:
• Reciprocating compressor cylinders used in fire flood operations
and other environments sensitive to combustion.
• Low and High temperature lubrication
• General lubrication
Physical PropertiesPRODUCTS FF-100 FF-150
ISO Viscosity Grade 100 150
Density lbs/gal 7.94 7.89
Viscosity @ 40°C, cSt 100 148@ 100°C, cSt 9.8 15.3@ 100°F, SUS 525 772@ 210°F, SUS 59.2 80.5
Viscosity Index 69 105
Rust - D665 B Pass Pass
Flash Point, °F(°C) 520(271) 520(271)
Autoignition Point, °F(°C) > 800(427) > 800(427)
Copper Corrosion - D130 1A 1A
Janu
ary
4, 2
005
SPECIAL NOTE: Summit FF Series lubricants are not compatible with some elastomers used in compressors and pumpsincluding some paint used in crankcases. Consult the MaterialsCompatibility Guide for specific recommendations.
FG Elite-32 is designed for use in rotary screw compressors and applications
requiring an ISO-32 lubricant. FG Elite-46 & FG Elite-68 are designed for use in
rotary screw compressors and other applications requiring an ISO-46 or ISO-68
lubricant. FG Elite-100 is designed for use in reciprocating compressors and other
applications requiring an ISO-100 lubricant. FG Elite-150 is designed for general
lubrication and reciprocating compressors requiring an ISO-150 lubricant.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
ISO Viscosity Grade 32 46 68 100 150
Viscosity
@ 40°C, cSt 33.0 45.5 67.1 103.0 148.0
@ 100°C, cSt 5.9 7.5 10.1 14.0 18.5
Viscosity Index 124 130 136 137 140
Flash Point, ºF (ºC) 460(238) 505(263) 500(260) 510(266) 530(277)
Pour Point, ºF (ºC) -74(-59) -40(-40) -42(-41) -44(-42) -51(-46)
4-BallWear (mm scar) 0.4 0.4 0.4 0.4 0.4
Water Separation 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0(ml oil/ml water/ml emulsion) (10) (10) (10) (10) (10)
Rust Pass Pass Pass Pass Pass
Copper Corrosion 1A 1A 1A 1A 1A
NSF Registered H1 H1 H1 H1 H1
ISO 21469 Pending Pending Pending Pending Pending
Kosher Approved Yes Yes Yes Yes Yes
Halal Certified Yes Yes Yes Yes Yes
CFIA Accepted Yes Yes Yes Yes Yes
SYNTHETIC AIR COMPRESSOR
FG ELITE SERIES (FOOD GRADE)
Summit FG Elite Series lubricants are specially designed for rotaryscrew, vane and reciprocating air compressors used in the food serviceindustry. These lubricants use 100% multisynthetic base oils incombination with performance driven additives to offer extendedlubricant life. Field tests have shown these lubricants will lastbetween 8,000 and 10,000 hours depending on operating conditions.In addition, this innovative chemistry offers increased solvency,which significantly reduces deposit and sludge formation. SummitFG Elite Series lubricants offer superior protection against rust,wear and corrosion.
Summit FG Elite Series lubricants meet USDA 1998 (H1) guide-lines (lubricants with incidental food contact) and are manufac-tured in an ISO 21469 certified facility. FG Elite Series lubricantshave the same software compatibility as Summit SH® Series lubri-cants.
April 10,
2013
FG Elite Series 32 46 68 100 150
Shelf Life: Product shelf life is 3 years from the date of manufacture, after which the
product should be recertified prior to use.
Physical Properties
FG-100 is designed for use in rotary screw compressors and applications
requiring an ISO-32 lubricant. FG-200 & FG-250 are designed for use in rotary
screw compressors and other applications requiring an ISO-46 or ISO-68
lubricant. FG-300 is designed for use in reciprocating compressors and other
applications requiring an ISO-100 lubricant. FG-500 is designed for general
lubrication and reciprocating compressors requiring an ISO-150 lubricant.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
ISO Grade 32 46 68 100 150
Viscosity
@ 40°C, cSt 29.6 46.7 69.1 96.2 149.7
@ 100°C, cSt 5.64 7.68 10.49 13.13 19.08
@ 100°F, SUS 152 235 355 494 764
@ 210°F, SUS 45.1 51.9 62.0 71.4 96.8
Viscosity Index 133 132 139 135 145
Specific Gravity 0.827 0.834 0.837 0.841 0.845
Density lbs/gal 6.886 6.944 6.973 7.002 7.037
Flash Point, ºF (ºC) 490(254) 530(277) 510(266) 535(279) 515(268)
Pour Point, ºF (ºC) -60(-51) -71(-57) -65(-54) -60(-51) -40(-40)
Autoignition Point,ºF (ºC) 730(388) 745(396) 750(399) 760(404) 770(410)
Emulsion Tendency 40/40/0(10) 40/40/0(5) 40/40/0(10) 40/40/0 (5) 43/37/0(10)
NSF Registered H1, HT1 H1 H1 H1 H1
ISO 21469 Yes Yes Yes Yes Yes
Kosher Yes Yes Yes Yes Yes
Halal Yes Yes - Yes Yes
CFIA Yes Yes Yes Yes Yes
SYNTHETIC AIR COMPRESSOR
FG SERIES (FOOD GRADE)The Summit FG Series lubricants are specially designed for rotaryscrew, vane and reciprocating compressors being used in the foodservice industry. These fully synthetic lubricants are NSF Registeredand meet USDA 1998 (H1) guidelines (lubricants with incidental foodcontact). Summit FG Series lubricants are Kosher/Halal certified andCFIA accepted. Summit is an ISO 21469 certified facility.
The FG Series lubricants are formulated from the highest quality
synthesized hydrocarbon fluids available. The special additive system
is blended with the synthetic base-fluid to provide extended lubricant life
and to protect against wear, rust and corrosion. FG Series lubricants
have the same software compatibility as Summit SH® Series lubricants.
Physical Properties
Marc
h 9
, 2012
FG SERIES FG-100 FG-200 FG-250 FG-300 FG-500
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
Specific Gravity .967
Viscosity:
@ 40°C, cSt 38
@ 100°C, cSt 5.4
Viscosity Index 62
Pour Point, °F (°C) -43.6 (-42)
Flash Point, °F (°C) 435 (224)
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f M
ay 1
3,
2002.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC SYSTEM FLUSH
Flushing OilSummit Flushing Oil is a diester based product designed forflushing lubricant circulating systems. It has excellentdetergency, dispersancy, and biodegradability properties.
Physical Properties
May 1
3,
2002
PRODUCT Flushing Oil
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
NATURAL GAS ENGINES
GEO PS GAS ENGINE OIL SERIES
Summit Gas Engine Oils are manufactured from a blend ofsynthetic and petroleum base stocks. They are recommendedfor service in two-cycle and four-cycle gas engines, naturallyaspirated and turbo-charged. GEO PS-130 and GEO PS-140are low ash. They have an excellent gas engine oil additivepackage containing anti-wear agents, oxidation inhibitors anddetergent -dispersants.
PRODUCTS GEO PS-130 GEO PS-140
SAE Grade 30 40
Viscosity
@ 40°C, cSt 96.0 119.2
@ 100°C, cSt 11.1 13.5
Viscosity Index 101 110
Flash Point, °F (°C) 450 (232) 540 (282)
Pour Point, °F (°C) -25 (-32) -42 (-41)
Foaming Tendency
Seq I NIL NIL
Seq II NIL NIL
Seq III NIL NIL
Copper Corrosion 1A 1A
Sulfated Ash, % wt. .45 .50
TBN, mg /KOH/g 5.10 5.50
Physical Properties
July
24,
2013
Customer Benefits:
Reduced oil consumptionSuperior lubrication at all temperaturesLonger engine lifeFaster starting in cold weather conditions
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
NATURAL GAS ENGINES
GEO SH GAS ENGINE OIL SERIES
Summit GEO SH Gas Engine Oils are 100% full synthetic, PAO EsterFormulations for 2-cycle and 4 cycle lean burn and stoichiometric natural gasengines. Summit GEO SH-130 and GEO SH-140 are low ash with excellentTBN retention to combat oil degradation and provide protection in high tem-perature acidic environments. GEO SH Series was developed with field testedrobust detergent/dispersant additive technology, balanced to keep pistons cleanand low valve recession while minimizing spark plug fouling. Summit GEO SHSeries Oils are recommended for four-stroke, high speed natural gas engineswhere Group II base products deteriorate prematurely or overheat under severecontinuous high temperature operation.
The end user benefits for Summit GEO SH Series include:
• Maximum Maintenance Flexibility
• Engine Uptime & Maximum Heat Release
• Excellent Fuel Efficiency & HP Improvement (BHP-hr)
• Cleaner Engine Operation & Prevents Ring Sticking
• Extended Drains Beyond Group II Based GEOs
• Excellent Low Temperature Pour and Cranking
• High Flash/High Fire Points
• NSCR Catalyst Compatible
• Bright Stock Free
Recommended for high speed, four stroke engines:Caterpillar, MWM(Deutz), Dresser-Rand (I, II & III), GE Jenbacher, Superior,Wartsila, Waukesha and Worthington
PRODUCTS GEO SH-130 GEO SH-140
SAE Grade 30 40Viscosity
@ 40°C, cSt 78.0 94.2
@ 100°C, cSt 12.1 13.5
Viscosity Index 151 144
Flash Point, °F (°C) 485 (252) 550 (288)
Pour Point, °F (°C) -40 (-40) -53 (-47)
Foaming Tendency
Seq I NIL NIL
Seq II NIL NIL
Seq III NIL NIL
Copper Corrosion 1A 1A
Sulfated Ash, % wt. .50 .50
TBN 5.50 5.50
Physical Properties
July
24,2
013
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f M
ay 1
3,
2002.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC GAS ENGINES
GEO SH GAS ENGINE OIL SERIES
Summit Synthetic Gas Engine Oils are recommendedfor service in two or four cycle gas engines, naturallyaspirated and turbo-charged. Summit GEO SH-30 andGEO SH-40 are ashless and have an excellent gasengine additive package containing anti-wear agents,oxidation inhibitors and detergent-dispersants.
PRODUCTS GEO SH-30 GEO SH-40
SAE Grade 30 40
Viscosity
@ 40°C, cSt 78.0 100.0
@ 100°C, cSt 12.1 14.6
Viscosity Index 151 155
Flash Point, °F (°C) 480 (249) 490 (254)
Pour Point, °F (°C) -40 (-40) -30 (-34)
Foaming Tendency
Seq I NIL NIL
Seq II NIL NIL
Seq III NIL NIL
Copper Corrosion 1A 1A
Sufated Ash, % wt. NIL NIL
Physical Properties
May 1
3,
2004
Customer Benefits:
Reduced oil consumptionSuperior lubrication at all temperaturesLonger engine lifeFaster starting in cold weather conditions
ISO Grade 15 22 32 46 68 100
Viscosity
@ 40°C, cSt 15.4 22.3 32.0 42.0 68.0 97.2
@ 100°C, cSt 3.41 4.30 5.38 6.41 8.76 11.14
@ 100°F, SUS 84.1 116.7 165.4 216.0 352.0 505.0
@ 210°F, SUS 37.8 40.7 44.3 47.7 55.8 64.4
Viscosity Index 91 96 101 101 101 100
Specific Gravity 0.860 0.860 0.865 0.868 0.870 0.873
Flash Point, ºF 415 405 445 445 450 445
(ºC) (213) (207) (230) (230) (232) (230)
Fire Point, ºF 430 440 475 475 480 475
(ºC) (221) (227) (246) (246) (249) (246)
Pour Point, ºF -6 0 3 5 -4 -6
(ºC) (-21) (-18) (-16) (-15) (-20) (-21)
Emulsion 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0
Tendency 10 Mins 10 Mins 10 Mins 10 Mins 10 Mins 10 Mins
NSF Registered H1 H1 H1 H1 H1 H1
ISO 21469 - Yes Yes Yes Yes Yes
Kosher Yes Yes Yes Yes Yes Yes
Halal Yes Yes Yes Yes Yes Yes
CFIA Yes Yes Yes Yes Yes YesProd
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Marc
h 9
, 2012
PREMIUM WHITE OIL HYDRAULIC
HYPAR FG SERIES Summit HyPar FG Series hydraulic oils are formulated specially forhydraulic systems operating in the food service, beverage, andpackaging industry. These premium white oil lubricants are NSFRegistered and meet USDA 1998 (H1) guidelines (lubricants with inci-dental food contact). HyPar FG Series lubricants are Kosher certifiedand CFIA accepted. Summit is an ISO 21469 certified facility.
HyPar FG Series lubricants are fortified with oxidationinhibitors, corrosion inhibitors, as well as anti-wear additives toenhance the superior qualities offered by the Food Grade base stock.They are extended life lubricants and have the same excellent compat-ibility as the Summit HyPar Series hydraulic oils.
Physical PropertiesHYPAR FG FG-15 FG-22 FG-32 FG-46 FG-68 FG-100
HyPar FG-32, FG-46 & FG-68 lubricants do not produce an iridescent
appearance (sheen) on the surface of the water when tested in
accordance with the U.S. Coast Guard Static Sheen Test.
Percent By Weight Phosphorous.....0.0695 Sulfur.....0.047
Shelf Life: Product shelf life is 3 years from the date of manufacture,
after which the product should be recertified prior to use.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f N
ovem
ber
16,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Novem
ber
16,
2010 ISO Grade 22 32 46 68 100
Specific
Gravity 0.858 0.860 0.864 0.869 0.874
Viscosity
@ 40°C, cSt 22.0 33.0 45.2 69.0 100
@ 100°C, cSt 4.27 5.47 6.67 8.67 11.5
@ 100°F, SUS 115 171 240 357 542
@ 210°F, SUS 40.6 44.6 48.6 55.4 65.7
Viscosity Index 97 100 95 97 97
Flash Point, ºF 400 425 445 475 510
(ºC) (204) (218) (229) (246) (266)
Fire Point, ºF 430 450 475 515 550
(ºC) (221) (232) (246) (268) (288)
Pour Point, ºF -33 -35 -35 -35 -35
(ºC) (-36) (-37) (-37) (-37) (-37)
PREMIUM SYNTHETIC BLEND HYDRAULIC
HYPAR SERIES Summit HyPar ashless hydraulic oils are formulated to meetthe requirements of all types of hydraulic systems. HyParoils are rust and oxidation inhibited to protect againstrust, wear and the formation of sludge. They are compatible withseal materials normally used in hydraulic systems.
Summit HyPar ashless hydraulic oils contain additivesnecessary to meet requirements for Denison HF-O, Vickersindustrial and mobile applications and Cincinnati MilacronP-68, P-69 and P-70 specifications.
Physical PropertiesPRODUCTS 22 32 46 68 100
Percent By Weight Phosphorous 0.053
Sulfur 0.111
Nitrogen 0.018
HyPar 32, 46 & 68 do not produce an iridescent appearance (sheen)
on the surface of the water when tested in accordance with the U.S.
Coast Guard Static Sheen Test.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
May 1
3,
2002
SYNTHETIC HYDRAULIC
HYSYN-22 Summit HySyn-22 ashless hydraulic oil is formulated fromthe highest quality synthetic hydrocarbons to meet therequirements of all types of hydraulic systems. HySyn 22 isrust and oxidation inhibited and protects against the formationof sludge. It is compatible with seal materials normally used inhydraulic systems.
HySyn-22 was specifically developed for low temperaturehydraulic applications and is approved by BucyrusInternational, Inc. as a hydraulic oil in their (Bucyrus-Erie)39R, 49R, and 59R Blast Hole Drills.
Summit HySyn-22 is primarily recommended for extend-ed fluid and component life in extreme cold temperatureapplications. Included in these recommendations are appli-cations in mobile and stationary hydraulic systems utilizingpiston, vane and gear pumps operating over a wide rangeof pressures and temperatures.
Physical PropertiesPRODUCT HYSYN-22
ISO Grade 22
Specific Gravity 0.821
Viscosity
@ 40°C, cSt 20.8
@ 100°C, cSt 4.48
@ -40°C, cSt 3298
Brookfield Viscosity @ -40°C, cP 3340
Viscosity Index 130
Flash Point, °F (ºC) 425 (218)
Fire Point, °F (ºC) 475 (246)
Pour Point, °F (ºC) -85 (-65)
Demulsibility 40/40/0 (5 mins.)
Hydrolytic Stability, 200°F, 48 hrs.
Cu Wt. Loss, mg/cm2 0.1
Viscosity Change, % 1.31
TAN Change, mg KOH -0.08
TAN H2O, mg KOH 0.43
Insolubles, % 0.00
ISO Grade 15 22 32 46 68 100
Viscosity
@ 40°C, cSt 15.0 21.7 30.7 46.8 68.4 99.3
@ 100°C, cSt 3.58 4.56 5.80 7.79 10.4 13.9
@ 100°F, SUS 82 113 157 238 350 510
@ 210°F, SUS 38.3 41.6 45.7 52.3 61.5 74.9
Viscosity Index 122 127 134 135 139 141
Flash Point, ºF 385 450 460 490 505 515(ºC) (196) (232) (238) (254) (263) (268)
Fire Point, ºF 440 495 525 565 565 585(ºC) (227) (257) (274) (296) (296) (307)
Pour Point, ºF -103 -94 -81 -71 -65 -60
(ºC) (-75) (-70) (-63) (-57) (-54) (-51)
Emulsion 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0
Tendency 10 Mins 10 Mins 10 Mins 10 Mins 10 Mins 10 Mins
Specific Gravity 0.816 0.821 0.830 0.834 0.838 0.841
NSF Registered H1 H1 H1 H1 H1 H1
ISO 21469 Yes - Yes Yes Yes Yes
Kosher Approved Yes Yes Yes Yes Yes Yes
Halal Certified Yes Yes Yes Yes Yes Yes
CFIA Accepted Yes Pending Yes Yes Yes Yes
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
`.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Marc
h 9
, 2012
SYNTHETIC HYDRAULIC
HYSYN FG SERIESSummit HySyn FG Series hydraulic oils are formulated specially forhydraulic systems operating in the food service, beverage, and pack-aging industry. These fully synthetic lubricants are NSF Registeredand meet USDA 1998 (H-1) guidelines (lubricants with incidental foodcontact). HySyn FG Series lubricants are Kosher/Halal certified andpending CFIA approval. Summit is an ISO 21469 certified facility.
HySyn FG lubricants are fortified with oxidation inhibitors,
corrosion inhibitors, as well as anti-wear additives to enhance the supe-
rior qualities offered by the synthetic hydrocarbon base stock. They
are extended life lubricants and have the same excellent software
compatibility as the Summit HySyn Series hydraulic oils.
Physical PropertiesHYSYN FG FG-15 FG-22 FG-32 FG-46 FG-68 FG-100
Percent By Weight Phosphorous 0.0695 Sulfur 0.047
Shelf Life: Product shelf life is 3 years from the date of manufacture, after whichthe product should be recertified prior to use.
HySyn FG-46 does not produce an iridescent appearance (sheen) on the surface ofthe water when tested in accordance with the U.S. Coast Guard Static Sheen Test.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
du
ct t
ypic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f M
ay 1
3,
2002.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Febru
ary
15,
2008
HYSYN FR SERIESHySyn FR Series fluids are based on high quality synthet-ic, organic, esters and carefully selected additives achieveexcellent hydraulic fluid performance. They provide a lubri-cation level equal to premium anti-wear hydraulic oils withviscosity grades of 46 and 68. HySyn FR fluids are fire-resistant with self-extinguishing properties. They are factorymutual certified, non-irritating, biodegradable, non toxic toaquatic life and contain no hazardous ingredients. HySynFR Series fluids are not water soluble and can be removedfrom collector systems by standard skimming techniques.
PRODUCTS HYSYN FR-46 HYSYN FR-68
Appearance Yellow to Amber fluid Yellow to Amber fluid
Kinematic viscosity
at 40°C 46 mm2/s or cSt 68 mm2/s or cSt
at 100°C 10 mm2/s or cSt 14 mm2/s or cSt
Viscosity index 220 215
Density at 15°C 0.90 g/cm3 0.91 g/cm3
Acid number 2.0 mg KOH/g 1.5 mg KOH/g
Pour point <-20°C (<-4°F) <-20°C (<-4°F)
Foam test 50-0 ml 50-0 ml
Corrosion protection Pass Pass
Flash point 302°C (575°F) 302°C (575°F)
Fire point 360°C (680°F) 350°C (662°F)
Auto ignition 450°C (842°F) 450°C (842°F)
Fire resistance -
Factory Mutual Pass Pass
Pump test - < 5 mg wear <5mg wear
ASTM D2882
Gear lubrication > 12 FZG load stage > 12 FZG load stage
Demulsibility 41-39-0 (15) 42-38-0 (30)
ml-ml-ml (min.) ml-ml-ml (min.)
Physical Properties
SYNTHETIC FIRE RESISTANT HYDRAULIC
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f M
ay 3
, 2011.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
May 3
, 2011
ISO Grade 15 32 46 68 100
Specific Gravity 0.8195 0.852 0.856 0.863 0.868
Viscosity
@ 40°C, cSt 15.5 32.0 43.5 64.1 95.0
@ 100°C, cSt 3.63 5.80 7.25 9.60 12.7
@ 100°F, SUS 84.6 163 223 329 491
@ 210°F, SUS 38.5 45.7 50.4 58.7 70.6
Viscosity Index 118 125 128 131 130
Flash Point, ºF 405 465 470 480 490(ºC) (207) (241) (243) (249) (254)
FZG Load Stage - >11 >11 >11 >11
Fire Point, ºF 430 495 505 515 525(ºC) (221) (257) (263) (268) (274)
Pour Point, ºF -85 -60 -55 -40 - 30
(ºC) (-65) (-51) (-48) (-40) (-34)
SYNTHETIC HYDRAULIC
HYSYN SERIES Summit HySyn ashless hydraulic oils are formulated from thehighest quality synthetic hydrocarbons to meet the requirementsof all types of hydraulic systems. HySyn oils are rust and oxi-dation inhibited to protect against rust, wear and the formationof sludge. They are compatible with seal materials normallyused in hydraulic systems.
Summit HySyn ashless hydraulic oils contain additives neces-
sary to meet requirements for Denison HF-O, Vickers industrial
and mobile applications and Cincinnati Milacron P-68, P-69 and
P-70 specifications.
Physical PropertiesPRODUCTS 15 32 46 68 100
Percent By Weight Phosphorous 0.053
Sulfur 0.111
Nitrogen 0.018
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
ISO Grade 68 100
Viscosity
@ 40°C, cSt 69.4 99.3
@ 100°C, cSt 10.8 13.9
@ 100°F, SUS 353 510
@ 210°F, SUS 63 75
Viscosity Index 146 142
Pour Point, °F (°C) -40 (-40) -40 (-40)
Density, g/ml, 60°F 0.8371 0.8381
100°F 0.8235 0.8264
185°F 0.7931 0.7958
Flash Point, °F (°C) 510 (266) 530 (277)
Fire Point, °F (°C) 570 (299) 580 (304)
Vapor Pressure, mmHg (torr)
100°F 0.0001 0.0001
200°F 0.0004 0.0003
300°F 0.0015 0.0013
Molecular Weight 765 895
SYNTHETIC NATURAL GAS COMPRESSOR
LCG SeriesSummit LCG Series are specially formulated compressor lubricants designed to be inertto reactive and corrosive gases encountered in landfills, refineries, EOR and chemicalprocess plants. LCG Series is based on 100 % pure synthetic PAO. It’s extremely lowvapor pressure results in minimal carryover past the separator. It does not contain sulfuror other impurities associated with petroleum based products that might react with theacids, chlorinated compounds or sour gases found in various applications. PAOs arefully saturated compounds and do not contain the alkenes or aromatics found in group I,II or even the group III mineral oils touted as being "pure." LCG Series is ester free andnot subject to hydrolysis issues encountered with most esters when used in acidic envi-ronments. LCG Series is suitable for use in certain chloride containing environmentswhere the use of mineral oil, esters or synthetic polyglycols (PAGs) are not permitted.Lubricants that are reactive with a gas stream may form by-products that are harmful toequipment or the environment. Solids may form and cause fouling or plugging issues incertain applications. Summit LCG Series will protect oil wetted parts against the corrosive effects of commonacids and water. It is engineered with superior technology to inhibit the effects of sourgases such as hydrogen sulfide or carbon dioxide on metal surfaces found within the oilwetted parts of a compressor.Summit LCG Series is designed to result in longer fluid and equipment life for rotatingcompressors in corrosive and reactive environments. Please consult with a SummitIndustrial Products lubrication expert about the suitability of LCG Series in these typesof applications.
THERMAL CHARACTERISTICS:
Specific Heat Thermal Conductivity
Cal/g-ºC BTU hr -1 ft-1 F-1
167ºF = 0.544 @100ºF = 0.089
212ºC = 0.565 @200ºF = 0.088
@300ºF = 0.087
Physical PropertiesPRODUCTS LCG-68 LCG-100
May 1
1,
2011
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f M
ay 1
3,
2002.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
May 1
3,
2002
SYNTHETIC BLEND AIR TOOLS
LUBEAIRSummit Lubeair air line lubricants are high-quality lubricantsspecially formulated for the most demanding air tool applications.There are two grades, Lubeair-32 and Lubeair-68, to handle bothsmall and large heavy-duty applications.
•Lubeair-32 is for small drills, grinders, vibrators, wrenches,
screwdrivers, air nailers and staplers, air cylinders, motors, valves
and chucks.
•Lubeair-68 is for large drills, grinders, vibrators, hand-held tools
and jack hammers.
Lubeair lubricants are a special blend of hydrogenated paraffin basestocks with very low pour points. Special additives have beenblended with the base stock to enhance its physical properties andprovide the following benefits:
•Emulsification of the moisture in the compressed air to prevent rust.
•Tough extreme pressure properties to protect tools from seizure and wear
and provide good adherence to wet working surfaces.
•Resistance to oxidation to prevent lost time due to gumming & varnishing.
•Proper atomization for good lubrication and optimum control of fogging.
Physical Properties
PRODUCTS LUBEAIR-32 LUBEAIR-68
ISO Grade 32 68
Viscosity
@ 40ºC, cSt 31.93 69.40
@ 100ºC, cSt 5.37 8.88
@ 100ºF, SUS 165 359
@ 210ºF, SUS 44.3 56.2
Viscosity Index 101 101
Pour Point, ºF (ºC) -5 (-21) 0 (-18)
Flash Point, ºF (ºC) 430 (221) 430 (221)
Four Ball Wear Test, mm 0.70 0.65
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
April 2,
2013
FOOD GRADE AIR TOOLS
LUBEAIR FG-22Summit Lubeair FG-22 air line lubricant is formulated specifi-cally for pneumatic tools used in the food service, beverage,and packaging industries. This lubricant is NSF Registered andmeets U.S.D.A. 1998 (H1) guidelines (lubricants with possibleincidental food contact). Summit is an ISO 21469 Certifiedfacility.
Lubeair FG-22 is fortified with a special additive packagewhich gives it excellent oxidation stability and low temperaturefluidity. It also contains an emulsifier for superior performancein high moisture environments
Physical Properties
PRODUCTS LUBEAIR FG-22
ISO Grade 22
Viscosity
@ 40ºC, cSt 22.30
@ 100ºC, cSt 4.30
Specific Gravity 0.860
Viscosity Index 96
Pour Point, ºF (ºC) 5 (-15)
Flash Point, ºF (ºC) 405 (207)
Fire Point, ºF (ºC) 440 (227)
Four Ball Wear Test, mm 0.54
Foaming:Seq. I, II, III 0/0
Copper Strip Corrosion 1A
Rust Pass
NSF Registered H1
CFIA Accepted Yes
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC AIR COMPRESSOR
LUBRICANT COOLANT Summit Lubricant Coolant is formulated from the bestdiester base stocks available and employs state of theart addi t ive technology to provide an outstandinglubricant and coolant. Lubricant Coolant is an excellentlubricant for the applications listed below. Please consultyour Summit representative for additional information.
PRODUCT LUBRICANT COOLANT
ISO Grade 68
Viscosity:
@ 40°C, cSt 65.0
@ 100°C, cSt 8.35
@ 100°F, SUS 336
@ 210°F, SUS 54.2
Viscosity Index 97
Specific Gravity 0.9640
Color Blue
Density, lbs/gal 8.037
Pour Point, °F (°C) -40 (-40)
Flash Point, °F (°C) 460 (238)
Autoignition Point, °F (°C) 765 (407)
Copper Corrosion, 3 hrs/100°C 1A
Conradson Carbon, % Residue 0.02
Recommended Applications:Rotary screw and vane compressors
Ball and roller bearings
Low temperature lubrication
High temperature lubrication
SPECIAL NOTE: Lubricant Coolant is not compatible with some elastomers used in compressors and pumps including the paint used in crankcases. Consult the Material Compatibility Guide for specific recommendations.
Physical Properties
Septe
mber
4,
2012
Prod
uct D
ata
Shee
tN
OT
E: T
he in
form
atio
n in
this
pub
licat
ion
is th
e re
sult
of c
aref
ul te
stin
g in
our
labo
rato
ries,
com
plem
ente
d by
sel
ecte
d lit
erat
ure.
It d
oes
not i
n an
y w
ay c
onst
itute
a g
uara
ntee
, nor
doe
s it
serv
e as
a li
cens
e to
ope
rate
any
pat
ent.
Due
to w
idel
yva
ryin
g co
nditi
ons
of p
rodu
ct u
se, w
hich
are
bey
ond
our c
ontro
l, it
is s
trong
ly re
com
men
ded
that
the
prod
uct b
e te
sted
for s
uita
bilit
y. P
rodu
ct ty
pica
l pro
perti
es in
this
pub
licat
ion
are
curr
ent a
s of
May
13,
200
2.
P.O
. Box
131
359
• Tyl
er, T
exas
757
13, P
hone
903
.534
.802
1 • F
ax 9
03.5
81.4
376
May
13,
200
2DESCALER
MORCON-10Tough on Concrete & Mineral Deposits
Cement in its various forms, is one of the primary construction materials of themodern world. It is used in things we see and use every day. We drive on it, weconstruct buildings with it, we dam rivers with it, and we even make boats withit. Cement is a very versatile material.
Removes cement and concrete
MORCON-10 ...CAN:
We also get it in a lot of places we don’t want it to be. Morcon-10 was devel-oped to remove cement and other calcium materials (lime-scale, barnacles, mus-sels) from places where they may cause a problem.
Morcon-10 is a hydrochloric acid solution that contains corrosion inhibitors,detergents, wetting agents and degreasing compounds. It is designed to penetrateencrusted scale, cement and barnacles and quickly remove them from the sur-face.
• Remove cement and concrete from trucks, building forms, concrete mixers,pumps, and all sorts of construction equipment.
• Clean excess mortar from bricks, tile and concrete blocks.
• Remove barnacles from propellers, skegs, rudders, and hulls of sea going ves-sels.
• Remove barnacles and mussels from pipe, screens, pumps, and exchangers inpower plants.
• Remove rust and stains from floors and process equipment.
MORCON-10 ...WILL:
• Reduce maintenance costs and improve appearance of equipment.
• Reduce operating costs by eliminating pressure drop andfrictional drag.
• Not harm most paints and metals including brass and cop-per when used as directed.
• Improve thermal efficiency by improving heat transfer coef-ficient.
Removes dime-scale, barnacles, & mussel a
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f J
anuar
y 2
7,
2011.
P.O
. B
ox 1
31359 •
Tyle
r, T
exas
75713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC NATURAL GAS COMPRESSOR
NGL SeriesThe lubricant problems generally encountered with the compression of natural gasand CO2 are related to the reaction of the gas stream with the lubricant. Theseinclude:• Solubility of gas in the lubricant causes reduced lubricant viscosity resulting in
cylinder scoring and high wear rates. Compensating for this with a higher viscosity lubricant can cause handling problems at lower temperatures.
• Absorption of lubricant into the gas stream results in high lubricant usage rates and a depletion of protective lubricant film in the cylinder.
• Condensed hydrocarbon liquids in the cylinder area can "wash" the lubricant from the cylinder walls causing severe mechanical damage.
• The carryover from increased lubricant feed rates or use of heavily compounded oils to compensate for hydrocarbon and CO2 dilution and wash-out can damage the well formation and plug CO2 injectors.
• Gases such as CO2 and H2S may be corrosive to compressor components. NGLprotects against the corrosive effect of these gases to compressor components while maintaining lubricating properties.
Summit NGL Series polyalkylene glycol lubricants were formulated to
combat these problems associated with high pressure reciprocating compres-
sors pumping natural gas, carbon dioxide, or process gases. NGL Series
lubricants are extremely resistant to hydrocarbon and CO2 dilution and
absorption of the gas stream components. Any lubricant carryover will not
impair the well formation as it is compatible with well-bore treatment fluids
and soluble in water. The result is a lubricant maintaining the proper viscosi-
ty for wear protection, resisting wash-out and carryover, and posing no threat of
damage to the well formation or CO2 injectors.
The extremely high viscosity index of the NGL Series lubricants allows
protection over a broad temperature range. The low pour point provides all-
season ease of handling even in very cold climates. The use of pressurized and
heated tanks as well as heat traced lines can be eliminated.
Summit NGL Series can offer these same advantages when com-
pressing a number of other difficult gases including hydrogen, helium and
nitrogen. Please contact your Summit representative with your specific
gas application.
PRODUCT NGL-444 NGL-555 NGL-777 NGL-888
ISO Grade - 100 150 220
Viscosity:
@ 40°C, cSt 79 105 150 209
@ 100°C, cSt 16.0 20.5 28.8 38.5
@ 100°F, SUS 397 113 753 1052
@ 210°F, SUS 83.5 21.0 140.0 185.0
Viscosity Index 218 222 233 236
Pour Point, °F (°C) -55(-48) -56(-49) -44(-42) -44(-42)
Flash Point, °F (°C) 450 (232) 505 (263) 500 (261) 515 (268)
Density, g/mL, 60ºF 1.0426 1.0455 1.0517 1.0531
g/mL,100ºF 1.0247 1.0281 1.0338 1.0352
g/mL,185ºF 0.9865 0.9910 0.9957 0.9973
Physical Properties
January
27,
2011
ISO Viscosity Grade 220
Viscosity:
@ 40°C, cSt 216
@ 100°C, cSt 27.1
@ 100°F, SUS 1114
@ 210°F, SUS 133
Viscosity Index 160
Specific Gravity 0.873
Density
@ 60°F, g/mL 0.872
@ 185°F, g/mL 0.821
Pour Point, °F (ºC) -22(-30)
Flash Point, °F (ºC) 470(243)
Four Ball Wear Test, mm 0.52
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f A
ugust
11,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC BLEND
NGP 220 Natural Gas Compressor
When a synthetic oil is not needed, Summit’s NGP 220 of highly refined petroleumbased lubricants are formulated to provide some of the same benefits provided byhydrocarbon based synthetics such as PAO and PIB. The additive technology usedin the NGP Series enable them to far outperform other mineral oil based lubricants.Some of the benefits are:• The high viscosity index (V.I.) of NGP 220 is comparable to a synthetic PAO and
means a significant increase in operating temperature range over most mineralbased oils. It also means a lower viscosity grade NGP 220 product may be used in place of a higher viscosity mineral oil with a lower viscosity index. This can mean lower temperature flow limits and may eliminate the need for heated, pressurized day tanks and heat traced lines. It can also mean better lubricant filmstrength at higher cylinder and packing temperatures on reciprocating compressors.
• The pour point of the NGP 220 approaches that of a synthetic PAO and may be asmuch as 25 ºF lower than some mineral based oils. The lower limit may eliminate noflow shutdowns on cold days or the need for special tank and line heaters.
• NGP 220 is made from highly purified petroleum oils that only contain traceamounts of sulfur and other impurities found in group I mineral oils. Impurities common to many mineral oil base stocks can react with components of the gas stream to form by-products harmful to the compressor system.
• NGP 220 is formulated to inhibit against the corrosive effects of wet CO2 and H2S often found in gas compressor applications.
• NGP 220 is tailor made for gas compressor applications. It is not simply an R&Ooil developed for general purpose lubrication put into gas compressor service.Both synthetics and petroleum based oils have their place in gas compressorapplications. Consult with Summit’s Gas Compressor Specialist to find out whichproduct is right for your application.
August
11,
2010
Thermal Characteristics:Specific Heat Thermal Conductivity
BTU/lbm - °F BTU/hr - ft2 and °F/inch140°F = 0.476 0°F = 0.94160°F = 0.485 200°F = 0.88180°F = 0.494 400°F = 0.83
PRODUCTS NGP-220
Physical Properties
ISO Viscosity Grade 32 68 100 150
Viscosity:
@ 40°C, cSt 32 67 95 150
@ 100°C, cSt 5.4 10 13.1 18.6
@ 100°F, SUS 165 343 488 774
@ 210°F, SUS 44 61 72 95
Viscosity Index 103 137 136 140
Specific Gravity 0.868 0.870 0.872 0.873
Density
@ 60°F, g/mL 0.867 0.868 0.871 0.872
@ 185°F, g/mL 0.823 0.824 0.827 0.831
Pour Point, °F (ºC) -27(-33) -27(-33) -25(-32) -25(-32)
Flash Point, °F (ºC) 440(227) 470(243) 465(241) 480(249)
Four Ball Wear Test, mm 0.60 0.51 0.56 0.58
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f A
ugust
6,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC BLEND
NGP SERIES Natural Gas Compressor
When a synthetic oil is not needed, Summit’s NGP Series of highly refined petroleumbased lubricants are formulated to provide some of the same benefits provided byhydrocarbon based synthetics such as PAO and PIB. The additive technology usedin the NGP Series enable them to far outperform other mineral oil based lubricants.Some of the benefits are:• The high viscosity index (V.I.) of NGP is comparable to a synthetic PAO and means
a significant increase in operating temperature range over most mineral basedoils. It also means a lower viscosity grade NGP product may be used in place ofa higher viscosity mineral oil with a lower viscosity index. This can mean lower temperature flow limits and may eliminate the need for heated, pressurized daytanks and heat traced lines. It can also mean better lubricant film strength at highercylinder and packing temperatures on reciprocating compressors.
• The pour point of the NGP Series approaches that of a synthetic PAO and may beas much as 25 ºF lower than some mineral based oils. The lower limit may eliminateno flow shutdowns on cold days or the need for special tank and line heaters.
• NGP is made from highly purified petroleum oils that only contain trace amountsof sulfur and other impurities found in group I mineral oils. Impurities common tomany mineral oil base stocks can react with components of the gas stream to formby-products harmful to the compressor system.
• NGP Series is formulated to inhibit against the corrosive effects of wet CO2 and H2S often found in gas compressor applications.
• NGP is tailor made for gas compressor applications. It is not simply an R&O oildeveloped for general purpose lubrication put into gas compressor service.
Both synthetics and petroleum based oils have their place in gas compressorapplications. Consult with Summit’s Gas Compressor Specialist to find out whichproduct is right for your application.
August
6,
2010
Thermal Characteristics:Specific Heat Thermal Conductivity
BTU/lbm - °F BTU/hr - ft2 and °F/inch140°F = 0.476 0°F = 0.94160°F = 0.485 200°F = 0.88180°F = 0.494 400°F = 0.83
PRODUCTS NGP-32 NGP-68 NGP-100 NGP-150
Physical Properties
Prod
uct D
ata
Shee
tN
OT
E: T
he in
form
atio
n in
this
pub
licat
ion
is th
e re
sult
of c
aref
ul te
stin
g in
our
labo
rato
ries,
com
plem
ente
d by
sel
ecte
d lit
erat
ure.
It d
oes
not i
n an
y w
ay c
onst
itute
a g
uara
ntee
, nor
doe
s it
serv
e as
a li
cens
e to
ope
rate
any
pat
ent.
Due
to w
idel
yva
ryin
g co
nditi
ons
of p
rodu
ct u
se, w
hich
are
bey
ond
our c
ontro
l, it
is s
trong
ly re
com
men
ded
that
the
prod
uct b
e te
sted
for s
uita
bilit
y. P
rodu
ct ty
pica
l pro
perti
es in
this
pub
licat
ion
are
curr
ent a
s of
Jun
e 21
, 200
7.
P.O
. Box
131
359
• Tyl
er, C
R 2
120,
Tex
as 7
5713
, Pho
ne 9
03.5
34.8
021
• Fax
903
.581
.437
6
ISO Grade 68 100 150 220
Specific Gravity 0.869 0.889 0.891 0.891
Viscosity @ 40°C, cSt 62.7 95.5 140.5 192.0 @ 100°C, cSt 10.10 13.9 18.50 22.40 @ 100°F, SUS 320 491 718 990@ 210°F, SUS 60.4 75.2 94.3 111.4
Viscosity Index 147 148 148 141
Pour Point, °F (°C) -55 (-48) -44 (-42) -49 (-45) -49 (-45)
Flash Point, °F (°C) 475 (246) 500 (260) 515 (268) 525 (274)
Autoignition, °F (°C) 750 (399) 760 (404) 760 (404) 765 (407)
Emulsion Tendency 40/38/2 40/38/2 40/37/3 40/37/3(10 mins.) (10 mins.) (10 mins.) (10 mins.)
Four Ball Wear, mm 0.55 0.50 0.45 0.40
SYNTHETIC NATURAL GAS COMPRESSOR
NGSH SERIESThe Summit NGSH Series of lubricants is formulated fromthe highest quality synthetic hydrocarbon base stocks.NGSH lubricants are extended life fluids with specialadditives to protect equipment from wear, rust and hydro-gen sulfide corrosion. These fluids are designed for rotaryscrew and reciprocating compressors in natural gas serv-ice. The NGSH Series lubricants have low pour points,high viscosity indices and excellent water demulsibility.Consult your Summit distributor or application engi-neer for assistance in choosing the proper fluid for yourapplication.
Physical Properties
Summit NGSH Series lubricants are compatible with commonlyused seal materials and equipment designed for use with petroleumoils.
PRODUCTS NGSH-68 NGSH-100 NGSH-150 NGSH-220
June
21,
200
7
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC REFRIGERATION LUBRICANTS
PGI SERIESSummit PGI synthetic lubricants were designed for use inthe compression of propane in refrigeration or unloadingservice. Available in three grades for rotary screw andreciprocating compressors, PGI is especially suitable forwet gas situations. Due to the varying make-up of gasesand operating temperatures, please contact your Summitrepresentative for specific product recommendations.
Physical Properties
PRODUCTS PGI-68 PGI-100 PGI-150
Viscosity Grade 68 100 150
Viscosity
@ 40°C, cSt 69 102 156
@ 100°C, cSt 12.7 18.0 26.2
@ 100°F, SUS 349 519 788
@ 210°F, SUS 70.2 92.2 128.1
Viscosity Index 186 195 205
Pour Point, °F (ºC) -54(-48) -49(-45) -44(-42)
Flash Point,°F (ºC) 480(249) 485(252) 495(257)
Density,g/ml, 60°F 0.992 0.996 1.000
100°F 0.954 0.958 0.961
Thermal Characteristics:
Specific Heat Thermal ConductivityCal/g-ºC BTU/Hr/(Ft ºF)
60ºC = 0.48 100ºF = 0.095
80ºC = 0.49 200ºF = 0.090
100ºC = 0.51
Febru
ary
21,
2012
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
ISO Grade 100 -
Viscosity
@ 40°C, cSt 89.5 114
@ 100°C, cSt 11.70 17.4
@ 100°F, SUS 460 584
@ 210°F, SUS 66.0 89.4
Viscosity Index 121 168
Pour Point, °F (°C) -44 (-42) 10 (-12)
Density, g/ml, 60°F 1.153 1.141
100°F 1.116 1.125
Flash Point, °F (°C) 560 (293) 510 (266)
SYNTHETIC NATURAL GAS COMPRESSOR
PGS-2 & PGS-3Summit PGS-2 & PGS-3 synthetic lubricants are polyglycol-basedproducts for use in rotary screw gas compressors requiring thehighest level of resistance to hydrocarbon dilution. Extreme conditionsdemand the unique properties of these fluids. These products whencompared to petroleum-based lubricants provide better wearprotection, reduced sludge and reduced deposit formation to ensureenhanced performance.
When used in rotary compressors with high concentrations of hexaneand heavier hydrocarbon vapors, the resistance to thinning byhydrocarbon dilution allows PGS-2 & PGS-3 to maintain the properoperating viscosity, extending drain intervals and parts life.Because of the varying make-up of gases and operating temperatures,please contact your Summit representative for specific productrecommendations.
As PGS-2 & PGS-3 lubricants are incompatible with petroleumoils, care should be taken to make sure they are not mixed.
Physical PropertiesPRODUCTS
Applications:
• Natural Gas Compressors • Process Gas Compressors
PGS-2
Septe
mber
13,
2012
PGS-3
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f M
arch
24,
2009.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
ISO Grade 68 100 150
Viscosity
@ 40°C, cSt 68 100 148
@ 100°C, cSt 14.8 19.4 27.8
@ 100°F, SUS 340 501 746
@ 210°F, SUS 78.2 97.8 135
Viscosity Index 230 218 227
Pour Point, °F (°C) -60 (-51) -49 (-45) -49 (-45)
Density, g/ml, 60°F 1.0413 1.0441 1.0484100°F 1.0243 1.0276 1.0321185°F 0.9852 0.9902 0.9939
Flash Point, °F (°C) 495 (257) 500 (260) 505 (263)
SYNTHETIC NATURAL GAS COMPRESSOR
PGS SERIESSummit PGS synthetic lubricants are polyglycol-basedproducts for use in natural gas rotary screw compressors.The resistance to thinning out by hydrocarbon dilutionallows PGS to maintain the proper operating viscosity,extending drain intervals and parts life. This unique blendis specifically additive treated with rust and corrosioninhibitors, oxidation control agents, anti-wear compounds,and hydrogen sulfide inhibitors. Contact your Summit repre-sentative for specific product recommendations.
As the PGS lubricants are incompatible with petroleum oils,care should be taken to make sure the two are not mixed.
Thermal Characteristics:
Specific Heat Thermal ConductivityCal/g-ºC BTU/Hr/(Ft ºF)
60ºC = 0.48 100ºF = 0.095
80ºC = 0.49 200ºF = 0.090
100ºC = 0.51
Physical PropertiesPRODUCTS PGS-150PGS-100PGS-68
Marc
h 2
4,
2009
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f Ja
nuar
y 1
9,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
ISO Grade 32 46 68 100 150
Viscosity
@ 40ºC, cSt 29.6 45.8 63.6 97.1 145.1
@ 100ºC, cSt 5.12 6.68 8.31 10.97 14.31
@ 100ºF, SUS 153 237 329 505 760
@ 210ºF, SUS 43.4 48.6 54.2 63.7 76.7
Viscosity Index 100 97 99 97 96
Pour Point, ºF -33 -33 -27 -27 -27
(ºC) (-36) (-36) (-33) (-33) (-33)
Flash Point, ºF 440 460 480 500 505
(ºC) (227) (238) (249) (260) (263)
Emulsion 40/40/0 40/40/0 42/38/0 41/39/0 43/37/0
Tendency (15 mins.) (15 mins.) (20 mins.) (15 mins.) (10 mins.)
Four Ball Wear 0.54 0.60 0.50 0.50 0.61
Test,
mm1200 rpm,
167ºF, 40 kg
PREMIUM SYNTHETIC BLEND
PS SERIES Air Compressor
Summit PS Series premium synthetic blend lubricants area blend of synthetic and petroleum base fluids speciallydesigned for compressor applications and are useful inmulti-purpose applications. The lighter grades are alsowell suited for gas and steam turbine applications. The PSSeries is manufactured using the highest quality basestocks, additive treated with rust and corrosion inhibitors,oxidation control agents, anti-wear compounds and defoa-mants and is exceptional at controlling sludge and deposits.Please contact your Summit representative for specificproduct recommendations.
Physical Properties
PRODUCTS PS-100 PS-150 PS-200 PS-300 PS-400
July
15.
2013
Page 1 of 2
Prod
uct D
ata
Shee
t Summit PS SERIES Air Compressor
Summit PS SERIES APPLICATIONS
Summit PS-100
is recommended for use in the following applications:
Rotary screw and centrifugal compressors
Low temperature lubrication
High temperature lubrication
Turbine lubrication
Vacuum Pumps
General lubrication for applications requiring an ISO 32 lubricant
Summit PS-150
is recommended for use in the following applications:
Rotary screw and centrifugal compressors
Ball and roller bearings
Low temperature lubrication
High temperature lubrication
Turbine lubrication
Vacuum Pumps
Mist lubrication systems
General lubrication for application requiring an ISO 46 lubricant
Summit PS-200
is recommended for use in the following applications:
Rotary screw and vane compressors
Ball and roller bearings
Low temperature lubrication
High temperature lubrication
Turbine lubrication
Vacuum Pumps
General lubrication for applications requiring an ISO 68 lubricant
Summit PS-300
is recommended for use in the following applications:
Reciprocating and rotary vane compressors
Ball and roller bearings
Low temperature lubrication
High temperature lubrication
Vacuum Pumps
General lubrication for applications requiring an ISO 100 lubricant
Summit PS-400 is recommended for use in the
following applications:
Reciprocating and rotary vane compressors
Ball and roller bearings
Low temperature lubrication
High temperature lubrication
General lubrication for applications requiring an ISO 150 lubricant
Page 2 of 2
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f Ju
ne
21,
2007.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
June 2
1,
2007
Physical Properties
PRODUCT PSV-22
ISO Grade 22
Viscosity
@ 40°C, cSt 20.9
@ 100°C, cSt 4.19
@ 100°F, SUS 109.6
@ 210°F, SUS 40.4
Viscosity Index 103
Pour Point, °F (°C) -27 (-33)
Flash Point, °F (°C) 380 (193)
Emulsion Tendency 40/38/2
(10 mins)
Copper Corrosion 1A
PREMIUM SYNTHETIC BLEND
PSV-22 VACUUM PUMP OIL
Summit PSV-22 is formulated from a vacuum distilledultra-pure paraffinic hydrocarbon base stock to provide anextremely low vapor pressure vacuum pump lubricant. Thisnon-foaming fluid has excellent water separation and pro-vides protection against wear, rust and corrosion. PSV-22is an extended life lubricant designed to function in recircu-lating systems such as liquid ring vacuum pumps which aresubject to severe temperature and environmental condi-tions.
Summit PSV-22 is compatible with commonly used seal andgasket materials.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC REFRIGERATION COMPRESSOR
RAB SERIESSummit RAB Series refrigeration oils are alkylate basedand formulated for use in reciprocating, rotary, andcentrifugal refrigeration compressors using ammonia, R12,R22, R114 and R502. These products are extremely stableat high compression temperatures while providing excellentlow temperature properties at evaporator temperaturesbelow -50°F. Other performance benefits include excellentsolubility with refrigerants, good compatibility withconstruction materials, extended service life, and reduceddeposit formations in high and low temperature areas.
Physical Properties
August
2,
2012
PRODUCTS RAB-32 RAB-68
Pour Point, °F (ºC) -49 (-45) -31 (-35)
Viscosity,
@ 40°C, cSt 33 55
@ 100°F, SUS 150 288
Flash Point, °F (ºC) 347 (175) 363 (184)
Floc Point, °F, (ºC) max -85 (-65) -67 (-55)
Specific Gravity 0.8600 0.8515
Dielectric Strength,KV 40 40
TAN, mgKOH/g 0.01 0.01
Water, ppm 30 30
NSF Registered H2 H2
Compatible with conventional mineral oil and most construction materials
including Viton®, Neoprene®, and Buna-N.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
.
P.O
. B
ox 1
31359 •
Tyle
r, T
exas
75713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Marc
h 9
, 2012
SYNTHETIC REFRIGERATION COMPRESSOR
RHB SERIESThe RHB Series is formulated from an AB-Alkylbenzene synthetic blend and designed tofunction under the stringent requirements of CFCs-Chlorofluorocarbon, HCFCs-Hydrochlorofluorocarbon refrigerants like R11, R12, R13, R22, R113, R114, R123, R124,R401a, R401b, R402a, R402b, R403b, R406a, R408a, R409a, R500, R502, R503; & R717(NH3 aka ammonia) DX and liquid overfeed industrial refrigeration systems. Besides itsinherent inertness, improved system efficiency and higher productivity, the performanceadvantages of the RHB Series versus naphthenic oils include:
(1) Partial miscibility and solubility with CFCs, HCFCs and ammonia for improved oil return to the compressor;
(2) Superior system cleanliness and lubricity to reduce component wear and corrosion; (3) Superior chemical and thermal stability; (4) Lower foaming tendency; and(5) Extended oil drain capability. RHB Series is well-suited for both rotary screw and reciprocating compressors in ammoniaservice. It is guaranteed to function with evaporators operating down to –40˚C. RHBSeries is compatible with all types of seals and O-rings used in ammonia compressorsincluding Neoprene (chloroprene), Buna-N and NBR. RHB Series is also 100% compatiblewith naphthenic and paraffinic mineral oils, as well as PAO and AB synthetic oils, whichallows top-off over these other oils and eliminates the need for system flushesand excessive evaporator maintenance. As with all specialty lubricants, indoor storageand immediate closing of original containers after use is strongly recommendedto avoid particulate and moisture contamination.
PRODUCTS RHB-32 RHB-46 RHB-68 RHB-100
Physical Properties
ISO Grade 32 46 68 100
Viscosity
@ 40ºC, cSt 32.2 43.8 67.8 100.6
@ 100ºC, cSt 5.4 6.3 8.4 10.6
Viscosity Index 99 88 93 86
Density, lb/gal 7.379 7.227 7.253 7.256
Pour Point, ºF (ºC) -56(-49) -54(-48) -51(-46) -44(-42)
Flash Point, ºF (ºC) 435(224) 465(241) 470(243) 480(249)
Fire Point, ºF (ºC) 475(246) 490(254) 505(263) 510(266)
Specific Gravity,60ºF 0.886 0.868 0.871 0.871
NSF Registered H2 H2 H2 H2
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
April 10,
2013
REFRIGERATION COMPRESSOR
RHT FG-68Summit RHT FG-68 is a highly refined,hydrotreated ammoniacompressor lubricant, specially designed to function under the stringentrequirements of closed-loop ammonia refrigeration systems in thefood service industry. Besides providing value added benefits in theareas of improved system efficiency and higher productivity, theperformance advantages of Summit RHT FG-68 versus naphthenicoils include:
• NSF Registered H1 and meets USDA 1998 (H1) guidelines (lubricants with incidental food contact)
• Lower wax content versus the “essentially” or “virtually”wax free oils marketed by competitors
• Reduced oil carryover• Superior cleanliness• Superior chemical and thermal stability• Enhanced wear protection• Lower foaming tendency• Extended oil drain interval capability• Less oil make-up
Summit RHT FG-68 is exceptionally well suited for rotary screwand reciprocating compressors in ammonia service. It is compatible with naphthenic and other hydrotreated paraffinic-basedcompressor oils for ammonia service, as well as PAO and alkylbenzene-based products. It is compatible with all seal elastomers commonlyused in these systems including Buna-N, NBR and Neoprene.
Physical PropertiesPRODUCTS RHT FG-68
ISO Grade 68
Viscosity @ 40ºC, cSt 67.97@ 100ºC, cSt 8.66
Viscosity Index 98
Specific Gravity, 60ºF 0.8760
Density, lb/gal @ 60ºF 7.2953
Pour Point, ºF (ºC) -42 (-41)
Flash Point, ºF (ºC) 470 (243)
Fire Point, ºF (ºC) 505 (263)
NSF Registered H1
Kosher Approved Yes
Halal Certified Yes
Shelf Life: Product shelf life is 3 years from the date of manufacture,
after which the product should be recertified prior to use.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
July
18,
2012
REFRIGERATION COMPRESSOR
RHT SeriesSummit RHT Series Performance Plus oils are a highly refined,hydrotreated ammonia compressor lubricants, specially designedto function under the stringent requirements of closed-loopammonia refrigeration systems. Besides providing value-added benefits in the areas of improved system ef f ic iencyand higher product iv i ty, the performance advantages ofSummit RHT Series oils versus naphthenic oils include:
• Lower wax content versus the “essentially” or “virtually” wax free oils marketed by competitors
• Reduced oil carryover• Superior cleanliness• Superior chemical and thermal stability• Enhanced wear protection• Lower foaming tendency• Extended oil drain interval capability• Less oil make-up
Summit RHT Series Performance Plus oils are exceptionallywell suited for rotary screw and reciprocating compressorsin ammonia service. They are compatible with naphthenicand other hydrotreated paraffinic-based compressor oils forammonia service, as well as PAO and alkylbenzene-basedproducts. They are compatible with all seal elastomers commonlyused in these systems including Buna-N, NBR and Neoprene.
Physical Properties
ISO Grade 32 46 68 100
Specific Gravity, 60°F 0.8621 0.8671 0.8670 0.8752
Viscosity
@ 40°C, cSt 31.18 42.55 70 100.94
@ 100°C, cSt 5.32 6.44 8.8 11.26
Viscosity Index 103 100 98 97
Flash Point, °F (ºC) 455(229) 460(238) 475(246) 515(268)
Pour Point, °F (ºC) -53(-47) -49(-45) -45(-43) -40(-40)
NSF Registered H2 H2 H2 H2
PRODUCTS RHT-32 RHT-46 RHT-68 RHT-100
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC REFRIGERATION COMPRESSOR
RPA SERIESSummit RPA Series is a synthesized hydrocarbon-alkylate100% full-synthetic formulation for reciprocating, rotary,and centrifugal refrigeration compressor applications usingany of several refrigerants including ammonia (R717),R12, R13, R22, R113, R114, R123, R401A, R401B, R402B,R409A, R500, R502 and R503.
Summit RPA Series is not compatible with R134A and mostHFCs. This product is extremely stable at higher compressiontemperatures while providing excellent low temperatureproperties at low evaporator temperatures. Performanceand cost benefits include:
• Reduced oil carryover and accumulation in the evaporator• Reduced oil consumption- Up to 70% less vs. mineral oils• Reduced deposit formation & low foaming tendency• Excellent seal, paint & plastic compatibility• Extended lubricant service life- Up to 5 times longer vs.
mineral oils• Chemically stable in the presence of normal levels of water & air• Extended lubricant service life vs.mineral oils
Physical PropertiesPRODUCTS RPA-32 RPA-46 RPA-68 RPA-100
ISO Grade 32 46 68 100
Viscosity
@ 0ºC, cSt 314 497 887 1776
@ 40ºC, cSt 31.3 43.6 61.8 91.5
@ 100ºC, cSt 5.45 6.47 8.89 10.48
Viscosity Index 109 97 119 96
Specific Gravity 0.8480 0.8500 0.8405 0.8570
Flash Point, ºF (ºC) 380(193) 395(202) 465(241) 375(191)
Pour Point, ºF (ºC) -49(-45) -33(-36) -65(-54) -22(-30)
Four Ball Wear, mm 0.66 0.53 0.85 0.66
TAN <0.1 <0.1 <0.1 <0.1
NSF Registered H2 H2 H2 H2
Marc
h 9
2012
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, T
exas
75713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
January
17,
2013
SYNTHETIC REFRIGERATION COMPRESSOR
RPE SERIESSummit's RPE Series is fully synthetic lubricants designed foruse in refrigeration compressors using R-134A and otherHFCs as the refrigerant. They have excellent chemical andthermal stability as well as superior lubricity characteristicswith steel and aluminum. They are miscible with all HFCs,HCFCs, CFCs and blends. They were specificallydeveloped for HFC refrigerants.
Physical Properties
ISO Grade 32 46 68 100 170
Viscosity
@ 40ºC, cSt 33 45.1 68.5 98.4 171.53
@ 100ºC, cSt 5.8 7.22 9.5 12.3 16.49
Viscosity Index 118 121 117 118 100
Specific Gravity 0.977 0.977 0.980 0.9745 0.9763
Density, lb/gal 8.14 8.14 8.16 8.12 8.13
Flash Point,
ºF (ºC) 471(244) 493(256) 520(271) 514(268) 585(307)
Fire Point,
ºF (ºC) 511(266) 530(276) 565(296) 550(287) 630(332)
Pour Point,
ºF (ºC) -58(-50) -31(-35) -35(-37) -15(-26) -27(-33)
PRODUCTS RPE-32 RPE-46 RPE-68 RPE-100 RPE-170
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
PRODUCTS
SYNTHETIC REFRIGERATION COMPRESSOR
R SERIESSummit R Series synthetic hydrocarbon refrigeration lubri-cants are designed to function under severe service conditions.These fluids have a very high viscosity index, contain no paraffinand are compatible with various fluorinated refrigerants,ammonia, methyl chloride and carbon dioxide. The Summit RSeries is completely miscible with petroleum-based fluids.
These fully synthetic lubricants are NSF Registered and meetUSDA 1998 (H1) guidelines (lubricants with incidental foodcontact). Summit R Series lubricants are Kosher/Halal certifiedand CFIA approved. Summit is an ISO 21469 certified facility.
R-100, R150 & R200 are designed to operate in rotary compressors
R-300 is designed to operate in reciprocating compressors
R-100 R-200 R-300
Physical Properties
May 1
3,
2011
R-150
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
ISO Grade 32 46 68 100
Specific Gravity 0.8274 0.8323 0.8357 0.8386
Viscosity
@ 40°C, cSt 31.0 45.8 63.3 95
@ 100°C, cSt 5.9 7.80 10.0 13.9
Viscosity Index 135 136 143 149
Pour Point, °F (ºC) -87 (-66) -78 (-61) -54 (-48) -60 (-51)
Flash Point, °F (ºC) 485 (252) 510 (266) 525 (274) 540 (282)
Fire Point, °F (ºC) 520 (271) 530 (277) 540 (282) 555 (291)
NSF Registered H1 H1 H1 H1
ISO 21469 Yes Yes Yes Yes
Kosher Yes Yes Yes Yes
Halal Yes Yes Yes Yes
CFIA Yes Yes Yes Yes
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
April 24,
2012
SYNTHETIC BLOWER LUBRICANTS
SBL FOOD GRADE SERIESSummit SBL Food Grade Series synthetic lubricants are formu-lated to provide maximum lubrication protection and service for allpositive displacement blowers including Roots, Gardner-Denver,Sutorbilt and Duroflow. Advantages over petroleum lubricantsinclude extended lubricant life (up to 4,000 hours with oil analysis),reduced operating temperatures, better corrosion protection,enhanced low and high temperature lubricating properties, longerblower life with reduced wear, and lower maintenance costs. TheSBL synthetic lubricants exceed the specification requirements forall of the major manufacturers of positive displacement blowersand are compatible with most commonly used seal materials.
These fully synthetic lubricants are NSF Registered and meetUSDA 1998 (H1) guidelines (lubricants with incidental foodcontact). Summit is an ISO 21469 certified facility.
Physical PropertiesSBL Food Grade SBL-100F SBL-150F SBL-220F SBL-320F
ISO Grade 100 150 220 320
Viscosity
@ 40°C, cSt 99.3 150 213 320
@ 100°C, cSt 13.9 19.1 26.4 33
@ 100°F, SUS 510 773 1098 1658
@ 210°F, SUS 74.9 96.9 130 161
Viscosity Index 141 145 158 144
Specific Gravity 0.841 0.845 0.848 0.851
Flash Point, °F (°C) 515 (268) 515 (268) 520 (271) 520 (271)
Pour Point, °F (°C) -60 (-51) -49 (-45) -40 (-40) -30 (-34)
Copper Corrosion 1A 1A 1A 1A
NSF Registered H1 H1 H1 H1
ISO 21469 Yes Yes Yes Yes
Kosher Approved Yes Yes Yes Yes
Hala Certified Yes Yes Yes Yes
CFIA Accepted Yes Yes Yes Yes
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
April 18,
2012
SYNTHETIC BLOWER LUBRICANTS
SBL SERIESSummit SBL synthetic lubricants are formulated to providemaximum lubrication protection and service for all positivedisplacement blowers including Roots, Gardner-Denver,Sutorbilt and Duroflow. Advantages over petroleum lubri-cants include extended lubricant life (up to 8,000 hours withoil analysis), reduced operating temperatures, better cor-rosion protection, enhanced low and high temperaturelubricating properties, longer blower life with reducedwear, and lower maintenance costs. The SBL syntheticlubricants exceed the specification requirements for all ofthe major manufacturers of positive displacement blowersand are compatible with most commonly used seal materials.
Physical Properties
PRODUCTS SBL-100 SBL-150 SBL-220 SBL-320
ISO Grade 100 150 220 320
Viscosity
@ 40°C, cSt 91.8 142.7 206.2 302.6
@ 100°C, cSt 13.1 18.0 23.4 31.0
@ 100°F, SUS 470 750 1086 1619
@ 210°F, SUS 71.9 91 116 150
Viscosity Index 142 140 140 141
Specific Gravity 0.859 0.865 0.869 0.874
Flash Point, °F (°C) 475 (246) 475 (246) 475 (246) 485 (252)
Pour Point, °F (°C) -60 (-51) -60 (-51) -45 (-43) -40 (-40)
Copper Corrosion 1A 1A 1A 1A
NSF Registered - - - H2
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SEAMER GEAR OIL
SEAMER OIL-150PSeamer Oil-150P is specially formulated to lubricate the gear systems found
in “once through” designed can closers used in food canning operations. This
machine design allows the oil to cascade through the gears, lubricating as it
goes, until it is discharged into the sanitary drain system from the bottom of
the machine . Seamer Oil-150P is blended using the highest quality base
stocks and utilizes an additive package that provides excellent wear, EP, and
corrosion properties. This superior formulation passes all 12 stages of the
FZG Gear Test. Tested extensively, Seamer Oil-150P has demonstrated
exceptional results when used in this application.
Manufactured in Summit's ISO 21469 Certified facility, this product is
produced under the strictest hygienic guidelines for food grade lubricant
production. Seamer Oil-150P is NSF H1 approved for use where there is a
possibility of incidental contact with the food being processed.
Physical PropertiesSEAMER OIL 150P
ISO Grade 150
Viscosity
@ 40°C, cSt 146
@ 100°C, cSt 14.5
Flash Point, °F (°C) 445 (229)
Fire Point, °F (°C) 485 (252)
Pour Point, °F (°C) 0 (-18)
FZG Gear Test 12+ Pass
NSF Registration H1
Kosher Approved Pending
Halal Certified Yes
CFIA Accepted Yes
May 1
, 2013
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SEAMER GEAR OIL
SEAMER OIL 150 SSummit Seamer Oil 150 S is designed to lubricate can seaming equipmentwhich reclaims the used oil. This specialized application requires aproduct that protects the gearing and other moving parts of the machine.The lubricant must also suspend contaminants for filtering and removalof water. Fortified with oxidation inhibitors, corrosion inhibitors andantiwear additives, Seamer Oil 150 S protects the moving parts of themachine. In addition, this formula holds water, juice, syrups and othercontaminants in suspension allowing for easy removal.
Produced in Summit’s ISO 21469 Certified manufacturing plant, SeamerOil 150 S meets USDA 1998 (H1) guidelines (lubricants for incidentalfood contact).
NOTE: For canning systems utilizing a “total loss system” or “once
through system”, use Summit Seamer Oil 150 P.
Physical PropertiesSEAMER OIL 150 S
ISO Grade 150
Viscosity @ 40°C, cSt 154.71
@ 100°C, cSt 19.20
Viscosity Index 142
Specific Gravity 0.8534
Density, lbs/gal (60°F) 7.0303
Flash Point, °F (°C) 515 (268)
Fire Point, °F (°C) 575 (302)
Pour Point, °F (°C) -49 (-45)
Four Ball Wear Test, mm .32 avg.
Rust Pass
Copper Corrosion 1A
NSF Registration H1 Pending
Kosher Approved Pending
Halal Certified Pending
CFIA Accepted Pending
Decem
ber
6,
2012
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
Prod
uct D
ata
Shee
tN
OT
E: T
he in
form
atio
n in
this
pub
licat
ion
is th
e re
sult
of c
aref
ul te
stin
g in
our
labo
rato
ries,
com
plem
ente
d by
sel
ecte
d lit
erat
ure.
It d
oes
not i
n an
y w
ay c
onst
itute
a g
uara
ntee
, nor
doe
s it
serv
e as
a li
cens
e to
ope
rate
any
pat
ent.
Due
to w
idel
yva
ryin
g co
nditi
ons
of p
rodu
ct u
se, w
hich
are
bey
ond
our c
ontro
l, it
is s
trong
ly re
com
men
ded
that
the
prod
uct b
e te
sted
for s
uita
bilit
y. P
rodu
ct ty
pica
l pro
perti
es in
this
pub
licat
ion
are
curr
ent a
s of
May
13,
200
2.
P.O
. Box
131
359
• Tyl
er, C
R 2
120,
Tex
as 7
5713
, Pho
ne 9
03.5
34.8
021
• Fax
903
.581
.437
6
May
13,
200
2SYNTHETIC GAS TURBINE OILS
SH®-32T AND SH®-46TSummit SH®-32T and SH®-46T gas turbine lubricants have beenformulated to operate in land-based gas turbines under a widerange of temperatures. Synthetic hydrocarbon base stocks andselected additives combine to provide excellent viscosity-tem-perature characteristics, oxidation stability, wear resistance, andload-carrying ability.
Summit gas turbine lubricants meet the requirements of specifica-tions approved by all of the major manufacturers of gas turbines and SummitSH®-32T is approved by Solar Turbine as conforming to their ES9-224 lube oilspecification for Class I ISO 32 lube oils.
•Low temperature fluidity - Pour Point of -65ºF.•High Viscosity Index - less viscosity change with temperature.•High temperature stability - demonstrated by FTM 5308 performance test.•Low foaming characteristics.•Excellent load-carrying ability.•Exceptionally good anti-wear as measured by ASTM D2266.
Physical Properties
Approximate ISO Grade 32
Viscosity@ 40°C, cSt 29.7 42.0@ 100°C, cSt 5.66 7.5
Viscosity Index 133 146
Specific Gravity 0.8400 0.8450
Pour Point, °F (ºC) -70 (-57) -65 (-54)
Flash Point, °F (ºC) 490 (254) 500 (260)
Fire Point, °F (ºC) 520 (271) 530 (277)
Autoignition Temperature, °F (ºC) 779 (415) 785 (418)
Total Acid Number 0.36 0.40
Four Ball Wear Test, mm 0.40 0.40
Corrosion-Oxidation TestTotal Acid No. Increase 0.8 0.7Viscosity Increase 6.9 6.2
PRODUCTS46
SH®-46TSH®-32T
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
ISO Grade 32 46 68 100 150
Viscosity:
@ 40°C, cSt 32.0 43.2 66.0 93.0 142
@ 100°C, cSt 5.80 7.34 9.80 12.5 16.3
@ 100°F, SUS 163 220 339 482 737
@ 210°F, SUS 45.7 50.4 59.6 69.8 85.1
Viscosity Index 126 134 132 130 122
Specific Gravity, 0.8510 0.8535 0.8610 0.8620 0.8899
Density, lbs/gal 7.112 7.129 7.170 7.179 7.410
Flash Point, °F(°C) 490(254) 525(273) 520(271) 535(279) 535(279)
Pour Point, °F (°C) -81(-63) -38(-39) -44(-42) -44(-42) -40(-40)
Autoignition Temp., °F (°C) 730 (388) 745 (396) 745 (396) 760 (404) 760 (404)
Emulsion 40/40/0 40/40/0 40/40/0 40/40/0 42/38/0Tendency 10 Mins. 10 Mins. 20 Mins. 15 Mins. 15 Mins.
Summit SH®
Series lubricants are compatible with commonly used
seal materials and equipment designed for use with petroleum oils.
Consult the Material Compatibility Guide for specific recommendations.
SYNTHETIC AIR COMPRESSOR
SH® SERIES
Summit SH® Series lubricants are manufactured from thehighest quality PAO (polyalphaolefin) base stocks andadvanced additive technology. SH® Series lubricants arerecommended for rotary screw, centrifugal, vane andreciprocating compressors and offer many advantages overpetroleum-based lubricants as well as some synthetics -especially where compatibility is an important concern.The SH® Series lubricants have low pour points, highviscosity indices and excellent water demulsibility.
Physical PropertiesPRODUCTS SH®-32 SH®-46 SH®-68 SH®-100 SH®-150
July
5,
2013
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f A
ugust
11,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
August
11,
2010
ISO Grade 15 22 32 46 68 100
Viscosity
@ 40°C, cSt 15.2 21.2 29.9 43.2 63.7 93.0
@ 100°C, cSt 3.54 4.51 5.70 7.31 9.60 12.5
@ 100°F, SUS 83.2 110 154 221 327 482
@ 210°F, SUS 38.2 41.4 45.3 50.7 58.7 69.8
Viscosity Index 113 129 134 133 132 130
Pour Point, °F -70 -80 -80 -38 -44 -40
(ºC) (-57) (-62) (-62) -39 (-42) (-40)
Flash Point, °F 415 430 490 505 520 510
(ºC) (213) (221) (254) (263) (271) (266)
Autoignition
Point °F 710 720 730 740 745 760
(ºC) (377) (382) (387) (393) (396) (404)
Copper Strip
Corrosion 1A 1A 1A 1A 1A 1A
Emulsion 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0 40/39/0
Tendency (10 mins.) (10 mins.) 10 mins.) 10 mins.) (10 mins.) (15 mins.)
Vapor
Pressure, mm Hg.
(Modified ARS 184-R1)
100ºF <0.00047 <0.00040 <0.00030 <0.00020 <0.00010 <0.00004
200ºF <0.00101 <0.00080 <0.00062 <0.00056 <0.00050 <0.00018
300ºF <0.00190 <0.00170 <0.00160 <0.00145 <0.00130 <0.00085
The Summit SHV Series are compatible with commonly used seal andgasket materials in vacuum pump service.
SYNTHETIC VACUUM PUMPS
SHV SERIES The Summit SHV Series is formulated from vacuumdistilled ultra-pure synthetic hydrocarbon base stock toprovide an extremely low vapor pressure vacuum pumplubricant. These non-foaming fluids have excellent waterseparation and provide protection against wear, rust andcorrosion. The SHV Series is an extended life lubricantdesigned to function in applications subject to severetemperature and environmental conditions.
Physical PropertiesPRODUCTS SHV-15 SHV-22 SHV-32 SHV-46 SHV-68 SHV-100
SRO SERIESGENERAL DESCRIPTION
The Summit SRO Series was developed to overcome many of
the shortcomings of most POE-based formulations which include
hygroscopicity, lack of wear protection, viscosity dilution and
chemical instability in the presence of moisture. The SRO Series
is a full synthetic formulation based on POE-Polyolester base
oils for optimum mutual solubility and oil return assurances.
The SRO Series is formulated for environmentally friendlier
refrigerant gases including HFCs like R134a, among others, in
industrial and commercial refrigeration, air conditioning and
chiller applications. To minimize additive compatibility issues,
the SRO Series should not be mixed with more than 5% of the
previous POE oil. SRO Series is not designed for ammonia
refrigeration due to its reactivity with R717. It is compatible
with all paints, plastics and elastomers used in this application.
As with al l special ty lubricants , indoor s torage in or iginal
containers and immediate closing of same after dispensing should
minimize moisture and par t iculate contaminat ion. When in
doubt as to the suitability for your particular application,
please consult the factory or your local Summit distributor.
Prod
uct D
ata
Shee
t SYNTHETIC REFRIGERATION COMPRESSOR
Page 1 of 2
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
June 1
8,
2013
Page 2 of 2
SYNTHETIC REFRIGERATION COMPRESSOR
SRO SERIES
SR
O S
eri
es
10
22
32
46
68
100
120
150
170
220
Vis
cosity
@ 4
0ºC
, cS
t10.0
21.8
32.6
45.5
66.8
101.5
120.8
150.3
170.3
218.7
@ 1
00ºC
, cS
t2.6
94.5
6.0
7.5
9.9
13.7
15
.618.3
19.6
23.6
Vis
cosity I
ndex
106
122
130
130
131
136
135
136
133
134
Fla
sh P
oin
t,ºF
370
470
500
530
520
540
525
545
530
550
ºC
188
243
260
277
271
282
274
285
277
288
Fire
Poin
t,ºF
390
510
530
560
565
580
580
580
590
590
ºC
199
266
277
293
296
304
30
4304
310
310
Pour
Poin
t,ºF
-105
-85
-71
-71
-65
-54
-56
-49
-44
-40
ºC-
76
-65
-57
-57
-54
-48
-49
-45
-42
-40
Specifi
c G
ravity
@60ºF
0.8
503
0.8
628
0.8
732
0.8
709
0.8
744
0.8
783
0.8
798
0.8
817
0.8
783
0.8
804
Ph
ys
ica
l P
rop
ert
ies
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f O
ctober
25,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC AIR COMPRESSOR
SUMMIT SIERRA® SERIES
Summit Sierra® is specifically designed to provide extended service to rotary
screw air compressors operating within normal conditions. Summit Sierra®
is rated to provide superior service for 8,000 hours in most air compressor
applications.
Produced from the highest grade additives and base stocks available, Summit
Sierra Series® will continue to protect air compressors from wear and deposit
formation where other compressor lubricants fail. Based on lubrication
technology with millions of hours of proven performance, Summit Sierra® is
supported by the Summit performance guarantee. Utilizing the free in-house
lubrication analysis provided by Summit, professional lab technicians can
track the performance of the lubricant and will determine when the lubricant
needs to be changed. Summit Sierra® is compatible with most rotary screw air
compressor lubricants on the market. It is not compatible with silicone or
polyglycol based air compressor lubricants.
ISO Grade 32 46 68
Viscosity @ 40ºC 33.8cst 46.4cst 67.5cst
Viscosity@100ºC 6.12cst 7.48cst 9.70cst
Viscosity Index 130 126 124
Specific Gravity 0.8671 0.8717 0.8747
Density (lbs/gal)
@ 60ºF 7.23 7.26 7.29
Pour Point -51ºC -48ºC -45ºC
Flash Point 455ºF 475ºF 510ºF
Fire Point 475ºF 505ºF 540ºF
Water Separation 40-40-0 40-40-0 40-40-0
(10 min) (10 min) (15 min)
PRODUCT SIERRA-32 SIERRA-46 SIERRA-68
Octo
ber
25,
2010
Physical Properties
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f O
ctober
23,
2006.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Octo
ber
23,
2006
SumTech® AQ-320
SumTech® AQ-320
NLGI Grade 2
Color beige, light brown
Texture homogeneous
Base Oil mineral oil
Base Oil Properties - ASTM D 446Viscosity at 40ºC cSt 320
Viscosity at 100ºC cSt 21
Viscosity Index 75
Thickener Type barium complex soap
Density at 20ºC (g/cm³) 0.98
Service Temperature -10ºF to 320ºF
Drop Point, ASTM D 2265 >220ºC(428ºF)
Penetration, ASTM D217Worked 60 ds 255 - 285
Oil Separation - ASTM D 6184 < 2%
4-Ball Wear - ASTM D 2266 appox. 0.4
4-Ball Load Wear Index -
ASTM D 2596 37.4
Last non Seizure load 50
Last seizure load 250
Weld load 315
Water Washout - ASTM D 1264 < 5
Corrosion Preventative Properties, Pass
ASTM D 1743Corrosion Preventative Properties,
EMCOR - ASTM D 6138 0 / 0 (no rust)
Copper Corrosion - ASTM D 4048 1a
BARIUM COMPLEX LUBRICATING GREASE
SumTech® AQ-320 is a Barium complex ISO 320 lubricating grease for use in wetenvironments. The special Barium complex thickener is resistant to steam and mildalkaline and acidic solutions preventing SumTech® AQ-320 from becoming washedout of the lubricating area. The nature of the special thickener system givesSumTech® AQ-320 a very tacky nature which is similar to the specific gravity ofwater, providing an unprecedented level of protection against water washout andcorrosion. Premium anti-oxidants provide excellent thermal stability and a blend ofcorrosion inhibitors extend the excellent anti-corrosion nature inherent of the thicken-er. SumTech® AQ-320 is the grease of choice for marine, pulp and paper, and steelmill industries where exposure to water and aggressive media cannot be avoided.SumTech® AQ-320 is also suitable for use in sealing water valves, labyrinth seals,and rotary steam unions.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f O
ctober
23,
2006.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Octo
ber
23,
2006
SumTech® EMB-160
SumTech® EMB-160
NLGI Grade 2
Color beige
Texture homogenous
Base Oil synthetic hydrocarbon/mineral oil
Base Oil Properties - ASTM D 446Viscosity at 40ºC cSt 160
Viscosity at 100ºC cSt 18
Viscosity Index 125
Thickener Type polyurea
Density at 20ºC (g/cm³) 0.9
Service Temperature -22ºF to 320ºF
Drop Point - ASTM D 2265 >250ºC(482ºF)
Penetration - ASTM D 217Worked 60 ds 265-295
Oil Separation - ASTM D 6184 <5
4-Ball Wear - ASTM D 2266 0.50 mm, 0.54 mm
Weld load 160 kg
Corrosion Preventative Properties -
ASTM D 1743 pass
Corrosion Preventative Properties,
EMCOR - ASTM D 6138 1
Copper Corrosion - ASTM D 4048 1a
POLYUREA LUBRICATING GREASE
SumTech® EMB-160 is semi-synthetic ISO 150 polyurea grease specificallydesigned for use in rolling element anti-friction bearings operating under extremetemperatures. The organic polyurea thickener system contains no metal ions whichact as catalysts for oxidation. SumTech® EMB-160 was designed with special anti-oxidants and corrosion inhibitors to ensure long life of rolling bearings operatingunder severe temperature and high humidity . The extended service temperaturerange of -22ºF to 320ºF and high speed factor of 500,000 nDm makes SumTech®
EMB-160 the ideal lubricating grease for electric motor bearings designed to belubricated for life.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
April 23,
2013
SumTech® FMG Series
SumTech® FMG-1 FMG-2
NLGI Grade 1 2
Color Off White to Yellow Off White to Yellow
Texture Homogenous Homogenous
Base Oil Mineral Oil/PAO Mineral Oil/PAO
Base Oil Properties
Viscosity @ 40°C cSt 138 cSt 138 cSt
Viscosity @ 100°C cSt 17.5 cSt 17.5 cSt
Viscosity Index 140 140
Thickener Type Aluminum Complex Aluminum Complex
Density at 20°C (g/cm) .95 .97
Service Temperature Range -35°C to 148°C (300°F) -30°C to 148°C (300°F)
Drop Point 250°C (482°F) 270°C (518°F)
Penetration
Worked 60 dbl strokes 320 280
100,000 dbl strokes 350 308
Oil Separation Less than 7% Less than 3%
4-Ball Wear ASTM D2266 0.45 mm 0.47 mm
4-Ball Load Wear Index 48.9 64.3
Last non-seizure Load 100 kg 100 kg
Weld Load 315 kg 400 kg
Corrosion Preventative Properties
ASTM D 1743 Pass Pass
Corrosion Preventative Properties
EMCOR – ASTM D 6138 0.0 0.0
Water Washout – ASTM D 1264 9% 3%
NSF Registered H1 H1
Kosher Approved Yes Yes
CFIA Accepted Pending Yes
ALUMINUM COMPLEX THICKENED SEMI-SYNTHETIC
SUMTECH® FMG grease is an aluminum complex thickened semi-synthetic lubricatinggrease created specifically for the food service, beverage, and packaging industries. Thealuminum complex thickener system provides excellent water resistance and a broadoperating temperature range. A combination of newly developed additives and dependableHX1 additives provide excellent anti-wear/extreme pressure properties, oxidation resistance,and corrosion prevention. Special additives are employed to keep the grease in placebetween wash-down cycles which improves equipment and lubricant life in wet conditions.SUMTECH® FMG grease is NSF Registered and meets USDA 1998 (H1) guidelines(lubricants with incidental food contact).
SUMTECH® FMG is ideal for lubrication of production equipment in beverage canningoperations, bottling operations, meat and poultry processing, dairy operations, fruit andvegetable processing, bakeries, and pharmaceutical plants.
Physical Properties
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
SumTech® SG Series
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Octo
ber
19.
2011
SumTech® SG-100 SG-220 SG-460
NLGI Grade 2 2 1.5
Color Beige Beige Beige
Texture Homogenous Homogenous Homogenous
Base Oil - ASTM D 446 Synthetic Synthetic Synthetichydrocarbon hydrocarbon hydrocarbon
Viscosity at 40ºC cSt Approx 103 Approx 226 Approx 470
Viscosity at 100ºC cSt Approx 15 Approx 26 Approx 45
Viscosity Index Approx 150 Approx 146 Approx 150
Thickener Type Lithium Lithium Lithiumcomplex soap complex soap complex soap
Density at 20ºC g/cm3 0.870 0.870 0.870
Service Temperature -40ºF to 285ºF -31ºF to 302ºF -22ºF to 285ºF
-40ºC to 140ºC -35ºC to 150ºC -30ºC to 140ºC
Drop Point - ASTM D 2265 Approx 280ºC Approx 280ºC Approx 280ºC
Penetration
Worked 60 ds 280 1/10 mm 280 1/10 mm 300 1/10 mm
Prolong worked 100,000 ds 310 1/10 mm 310 1/10 mm 330 1/10 mm
ASTM D 217
Oil Separation - ASTM D6184 < 3% < 3% < 4%
4-Ball Wear - ASTM D 2266 0.47mm, 0.47mm 0.57mm, 0.52mm 0.55mm, 0.58mm
4-Ball Load Wear Index 43 50 54
Last non seizure load 63-kg (0.31mm) 80-kg (0.39mm) 100-kg (0.43mm)
Last seizure load 250-kg (2.12mm) 250-kg (2.02mm) 250-kg (2.11mm)
Weld load, kg 315 315 315
ASTM D 2596
Corrosion Preventative
Properties - ASTM D 1743 Pass Pass Pass
Corrosion Preventative
Properties EMCOR 0/0 0/0 0/0
ASTM D 6138
Copper Corrosion 1b 1b 1b
ASTM D 4048
Timken OK Load, lbs 70 65 75
ASTM D 2509
SYNTHETIC BASED LUBRICATING GREASE
SumTech® SG Series lubricating greases are heavy-duty multipurpose lubricatinggreases with development emphasis on long-term and lifetime lubrication of rollingelement bearings under moderate to high load. The special lithium complex soapthickener and synthetic hydrocarbon base oil are proven components for hightemperature operation. Special anti-oxidant blended additives provide oxidationstability at both low and high temperatures. Synergistic corrosion inhibitors offerprotection for both ferrous and yellow metals which are commonly used in today'srolling element bearings.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es, co
mple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itu
te a
guar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y v
aryin
g
condit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120, T
exas
75713, P
hone
903.5
34.8
021
• F
ax 9
03.5
81.4
376
SYNTHETIC AIR COMPRESSOR
SUPRA- 26NSummit Supra-26N has been formulated to address thespecific problems associated with centrifugal compressorlubricants - thermal degradation and deposit formation. Thepolyglycol/ester blend has provided superior performancein the areas of oxidation resistance and deposit formation..
Physical Properties
Viscosity
@ 40°C, cSt 26.5
@ 100°C, cSt 5.4
@ 100°F, SUS 136
@ 210°F, SUS 44.2
Viscosity Index 141
Specific Gravity 0.9593
Density, lbs/gal 7.989
Pour Point, °F (°C) -69 (-56)
Flash Point, °F (°C) 485 (252)
PRODUCT SUPRA-26N
July
26,
2011
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f N
ovem
ber
4,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC AIR COMPRESSOR
SUPRA- 32Summit Supra-32 has been formulated to address thespecific problems associated with conventional rotaryscrew and centrifugal compressor lubricants - thermaldegradation and deposit formation. The polyglycol/esterblend has provided superior performance in the areas ofoxidation resistance and deposit formation. Supra-32eliminates the varnish, sludge and the frequent lubricantchanges associated with petroleum oils.
Physical Properties
SAE GRADE
Viscosity
@ 40°C, cSt 38.3
@ 100°C, cSt 7.30
@ 100°F, SUS 195
@ 210°F, SUS 50.6
Viscosity Index 158
Specific Gravity 0.9650
Density, lbs/gal 8.036
Pour Point, °F (°C) -65 (-54)
Flash Point, °F (°C) 480 (249)
Autoignition Temp., °F (°C) 730 (388)
Conradson Carbon, % Residue 0.020
Rotary Bomb Oxidation Test, Min. 2300
Evaporation Loss Percentage,
22 hours @ 210°F 0.26
PRODUCT SUPRA-32
5W-20
Novem
ber
4,
2010
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f Ju
ne
21,
2007.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC AIR COMPRESSOR
SUPRA COOLANT®
Summit Supra Coolant® has been formulated to address thespecific problems associated with conventional rotaryscrew compressor coolants - thermal degradation anddeposit formation. The polyglycol/ester blend hasproven itself superior in the areas of oxidation resistanceand deposit formation. Supra Coolant® is the alternative tovarnish, sludge and the frequent lubricant changesassociated with hydrocarbon oils.
Physical Properties
SAE GRADE 10W-20
Viscosity
@ 40°C, cSt 54.9
@ 100°C, cSt 9.32
@ 100°F, SUS 279
@ 210°F, SUS 57.7
Viscosity Index 153
Specific Gravity 0.9652
Density, lbs/gal 8.038
Pour Point, °F (°C) -54 (-48)
Flash Point, °F (°C) 510 (266)
Autoignition Temp., °F (°C) 750 (399)
Conradson Carbon, % Residue 0.028
Rotary Bomb Oxidation Test, Min. 2300
Evaporation Loss Percentage,
22 hours @ 210°F 0.26
June 2
1,
2007
PRODUCT SUPRA COOLANT-
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f M
ay 1
3,
2002.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
May 1
3,
2002
ISO Grade 32 68
Viscosity
@ 40ºC, cSt 30.6 66.6
@ 100ºC, cSt 5.80 9.78
@ 100ºF, SUS 157 342
@ 210ºF, SUS 45.6 59.4
Viscosity Index 134 129
Pour Point, ºF (ºC) -55 (-48) -50 (-46)
Flash Point, ºF (ºC) 450 (232) 450 (232)
SYNTHETIC AIR TOOLS
SYNGARD SERIESSyngard synthetic air line lubricants are formulated from the high-est quality, wax-free, synthesized hydrocarbon fluids available andfortified with an additive system designed for the most demandingair tool applications. Syngard oils are available in both ISO 32and ISO 68 viscosities to accommodate both small and large airtools.
The unique properties inherent in this synthetic air line lubricantmake it especially effective in counteracting the moisture present inall compressed air. The extremely low vapor pressure and excellentmetal wetting property of Syngard oil’s allow them to outperform reg-ular lubricants and significantly reduce lubricant consumption.When applied by an automated system, be sure to adjust your systemto take advantage of Syngard oils reduced consumption capability.
•Lower vapor pressure and unique metal wetting properties reduce
lubricant consumption.
•Moisture in the compressed air is emulsified to protect metal surfaces
and prevent rust.
•Enhanced extreme pressure properties protect tools from seizure and wear
and provide good adherence to wet working surfaces.
•Elimination of lubricant oxidation prevents lost time due to gumming and
varnishing.
•Proper atomization for good lubrication and control of fogging.
•Extremely good low temperature properties to protect equipment in
adverse weather conditions.
Physical PropertiesPRODUCTS SYNGARD-32 SYNGARD-68
SYNTHETIC GEARS/BEARINGS FOOD GRADE
SYNGEAR® FG SERIESThe Syngear® FG Series gear oils are specially formulated forgear systems operation in the food service and packagingindustry. These fully synthetic lubricants are NSF Registered andmeet USDA 1998 (H-1) guidelines (lubricants with incidental foodcontact). Syngear® FG Series lubricants are Kosher/Halal certifiedand CFIA accepted. Summit is an ISO 21469 certified facility.
Syngear® FG lubricants are fortified with oxidation inhibitors as
well as anti-wear/EP additives to pass the highest stages of the
FZG test. They are extended life lubricants and have the same
excellent software compatibility as the Summit Syngear® Series
gear oils
SYNGEAR® FG-150 FG-220 FG-320 FG-460 FG-680
ISO Grade 150 220 320 460 680
Specific Gravity 0.845 0.848 0.851 0.856 0.862
Viscosity
@ 40°C, cSt 150 206 320 429 655
@ 100°C, cSt 19.1 24.3 33.0 40.0 50.0
Viscosity Index 145 147 144 142 131
Flash Point, °F 515 520 520 500 495
(°C) (270) (271) (271) (260) (257)
Fire Point, °F 580 585 585 565 560
(°C) (304) (307) (307) (296) (293)
Pour Point, °F -49 -44 -44 -38 -20
(°C) (-45) (-42) (-42) (-39) (-29)
FZG Gear Test 12+ 12+ 12+ 12+ 12+
Pass Pass Pass Pass Pass
NSF Registered H1 H1 H1 H1 H1
ISO 21469 Yes Yes Yes Yes Yes
Kosher Approved Yes Yes Yes Yes Yes
Halal Certified Yes Yes Yes Yes Yes
CFIA Accepted Yes Yes Yes Yes Yes
Physical Properties
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f N
ovem
ber
4,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
August
2,
2011
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC GEARS / HEAVY DUTY
SYNGEAR®
Heavy Duty SeriesMost industries in today's world are shifting their focustoward efficiency improvements by putting an emphasis onreducing energy requirements for equipment used in plantoperations and for vehicular equipment. Technologicaladvances in lubricants have helped reduce the input powerused to operate equipment by reducing friction. Summit hasdeveloped synthetic gear oils which will not only reducefrictional drag, but will also protect gears against failuresassociated with heavy loading. Syngear® Heavy DutySeries meet the requirements of the API designations GL-5& MT-1, the MIL-L-2105E specification, SAE J2360 andthe Mack GO-J specification. Summit Syngear® HeavyDuty Series lubricants are designed to meet the require-ments of Eaton and Rockwell differentials.
SYNGEAR® 75W-90 75W-140 80W-140
Viscosity
@ 40°C, cSt 157 183.92 283
@ 100°C, cSt 17.8 26.08 31.9
@ 100°F, SUS 727 940.89 1470
@ 210°F, SUS 89 128.09 156
Viscosity Index 146 177 150
Flash Point, ºF (ºC) 425 (218) 430 (221) 450 (232)
Pour Point, ºF (ºC) -50 (-45) -58 (-50) -35 (-37)
Copper Strip Corrosion 1B 1B 1B
Specific Gravity 0.877 0.885 0.888
Physical Properties
JU
LY
31,
2012
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f A
ugust
19,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
August
19,
2010
ISO Grade 150 220 320 460 680
Viscosity
@ 40°C, cSt 143 224 319 442 650.3
@ 100°C, cSt 27.2 41.3 57.0 78.1 110.6
@ 100°F, SUS 718 1135 1607 2224 3290
@ 210°F, SUS 133 199 273 374 530
Viscosity Index 229 238 247 259 268
Specific Gravity 1.048 1.055 1.058 1.060 1.061
Flash Point , °F (°C) 525 (270) 505 (263) 510 (266) 515 (268) 525 (274)
Pour Point, °F (°C) -49 (-45) -49 (-45) -44(-42) -44(-42) -44(-42)
FZG Gear Test 12+ 12+ 12+ 12+ 12+Pass Pass Pass Pass Pass
NSF Registered H1 H1 H1 H1 H1
ISO 21469 Yes Yes Yes Yes Yes
CFIA Yes Yes Yes Yes Yes
SYNTHETIC GEARS / BEARINGS
SYNGEAR®
Food Grade PG SERIESSummit Syngear® Food Grade PG Series synthetic lubricants arepolyglycol-based products for use in enclosed gear, bearings, andcompressors where conditions demand the unique properties ofthese fluids. Use these lubricants where there is the potential forincidental contact with food or food packaging. Better wear protec-tion, thermal and oxidation stability, and reduced sludge anddeposit formation insure enhanced performance when comparedwith petroleum-based lubricants. These lubricants are NSFRegistered and meet USDA 1998 (H1) guidelines (lubricants withincidental food contact) for use in food plants. Summit is an ISO21469 certified facility.Do no add directly to food.
Syngear® Food Grade PG Series lubricants are incompatible with other oils.Care should be taken to prevent the two types of fluids from beingmixed.
Physical PropertiesSYNGEAR® PG-150F PG-220F PG-320F PG-460F PG-680F
Thermal Characteristics:
Specific Heat Thermal ConductivityCal/g-ºC BTU/Hr/(Ft ºF)
60ºC = 0.48 100ºF = 0.095
80ºC = 0.49 200ºF = 0.090
100ºC = 0.51
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f D
ecem
ber
15,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
ISO Grade 220 320 460 680 1000
Viscosity
@ 40°C, cSt 237 314 441 654 1000
@ 100°C, cSt 42.9 55.7 76.6 111 162.0
@ 100°F, SUS 1191 1580 2224 3312 5072
@ 210°F, SUS 206 266 366 532 774
Viscosity Index 238 245 255 268 280
Specific Gravity 1.052 1.054 1.056 1.057 1.056
Flash Point , °F (°C) 510 (266) 520 (271) 530 (277) 525 (274) 525 (274)
Pour Point, °F (°C) -49 (-45) -49 (-45) -44(-42) -44(-42) -44(-42)
FZG Gear Test 12+ 12+ 12+ 12+ 12+
Pass Pass Pass Pass Pass
SYNTHETIC GEARS / BEARINGS
SYNGEAR® PG SERIESSummit Syngear® PG Series synthetic lubricants arepolyglycol-based products for use in enclosed gear,bearings, and compressors where conditions demand theunique properties of these fluids. Better wear protection,thermal and oxidation stability, and reduced sludge anddeposit formation insure enhanced performance whencompared to petroleum-based lubricants.
Syngear ® PG Series lubricants are incompatible withpetroleum oils. Care should be taken to make sure the twotypes of fluids are not mixed.
Physical PropertiesSYNGEAR® PG-220 PG-320 PG-460 PG-680 PG-1000
Thermal Characteristics:
Specific Heat Thermal ConductivityCal/g-ºC BTU/Hr/(Ft ºF)
60ºC = 0.48 100ºF = 0.09580ºC = 0.49 200ºF = 0.090
100ºC = 0.51
Decem
ber
15,
2010
GENERAL DESCRIPTION
Summit Syngear® SH®-1000 Series gear lubricants are formulated with
synthetic base stocks and fortified with select additive systems to enhance their
exceptional performance. The PAO base fluid used has outstanding oxidation
and thermal stability, naturally high viscosity index and excellent low
temperature pumpability and fluidity. The unique additive system used
provides increased oxidation stability, extreme pressure properties, and
maximum protection against wear, rust, corrosion and foaming.
In today's world of efficiency improvements, there has been much emphasis
placed on reducing energy requirements for equipment used in plant operations.
Summit Syngear® synthetic gear lubricants have proven to reduce friction, there-
by reducing the input power to operate the equipment or increasing the available
power output. The reduction of fluid friction results in lower lubricant operating
temperatures, prolonging the life of both the lubricant and the equipment. The
additive system used in this product not only reduces frictional drag, but also
protects gears against failures associated with heavy loading and meets the
requirements of U.S. Steel 224 specification, AGMA 9005-D94 specification, DIN
51517 Part 3 CLP specification and API GL-4 Gear Service Category.
APPLICATION
Summit Syngear® SH®-1000 Series gear lubricants are recommended for use in
all types of enclosed gearing as well as plain and rolling element bearings.
These lubricants are ideal for heavily loaded low speed gears and bearings
where boundary or elasto-hydrodynamic lubrication (EHL) conditions exist,
such as in mine hoist gear reducers. They are particularly recommended for
gearboxes which operate under excessively high temperatures where good quality
conventional oils rapidly oxidize. Summit Syngear® SH®-1000 Series gear lubricants
may also be used in certain open gear applications, but it is recommended that
Summit lubrication engineers be consulted to select the most effective method
of application. Summit Syngear SH®-10032, SH®-10046 and SH®-10068 are also
recommended or use in piston or gear-type pumps, expecially where pressures
exceed 1000 psi or when operating over a wide temperature range.
Summit Syngear® SH®-1000 Series gear lubricants are compatible with most
seal materials, paints and plastics, including nitrile Buna N, neoprene, viton,
teflon, polyethylene, polyurethane ether, fluorocarbon, polyacrylate,
polysulfide, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer.
SYNTHETIC GEARS / HEAVY DUTY
SYNGEAR® SH®-1000 SERIES
Prod
uct D
ata
Shee
t
Page 1 of 2
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SY
NG
EA
R®
SH
®-1
00
32
SH
®-1
0046
SH
®-1
0068
SH
®-1
01
0
S
H®
-10
15
S
H®
-10
22
S
H®
-10
32
SH
®-1
04
6
SH
®-1
06
8S
H®
-11
00
S
H®
-11
50
ISO
Gra
de
32
46
68
100
150
220
320
460
680
1000
1500
AG
MA
Num
ber
---
2 E
P3 E
P4 E
P5 E
P6 E
P7 E
P8 E
P8 E
P9 E
P
Vis
cosi
ty
@ 4
0°C
, cS
t31.0
42.9
67.1
95.7
147
232
342
490
700
947
1513
@ 1
00°C
, cS
t5.8
7.4
9.9
12.9
17.8
25.4
32.8
43.1
54.2
66.2
95.8
Vis
cosi
ty I
ndex
132
137
130
132
133
139
134
139
134
135
143
Speci
fic G
ravi
ty0.8
49
0.8
51
0.8
59
0.8
62
0.8
68
0.8
77
0.8
78
0.8
82
0.8
92
0.8
90
0.8
92
Pour
Pt. F
°(C
°)-5
8 (
-50)
-40 (
-40)
-44 (
-42)
-42 (
-41)
-4
9 (
-45)
-4
5(-
43)
-40(-
40)
-35(-
37)
-30(-
34)
-20(-
28)
-17(-
27)
Fla
sh P
t. F
°(C
°)470 (
243)
475 (
246)
480 (
249)
485(2
52)
485(2
52)
485(2
52)
485(2
52)
485(2
52)
485(2
52)
485(2
52)
490(2
54)
Copper
Corr
osi
on
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
Rust
Test
Pass
Pass
Pass
Pass
Pass
P
ass
Pass
Pass
Pass
P
ass
Pass
Tim
ken O
K,
lbs
60
60
65
65
65
65
65
65
65
65
65+
Four-
Ball
Weld
, kg
s
200
200
200
200
315
315
315
315
315
400
400
Four-
Ball
Sca
r,m
m.5
0.4
0.3
0
.3
0.3
9.3
4.3
0.3
0.3
0.3
0.3
0
FZ
G G
ear
Test
12+
12+
12+
12+
12+
12+
12+
12+
12+
12+
12+
Pa
ss
Pa
ss
Pa
ss
Pa
ss
Pa
ss
Pa
ss
Pa
ss
Pa
ss
Pa
ss
Pa
ss
Pa
ss
Ph
ysic
al
Pro
pert
ies
SYNTHETIC GEARS / HEAVY DUTY
SYNGEAR® SH®-1000 SERIES
July
15,
2013
Page 2 of 2
SYNGEAR® SH®-7000 SERIESGENERAL DESCRIPTION
Summit Syngear® SH®-7000 Series synthetic gear lubricants are
formulated using synthesized hydrocarbon fluid and select additives to
enhance oxidation resistance and provide maximum protection
against wear, rust, corrosion and foaming. These PAO based fluids
provide significantly better thermal and oxidation stability, as well as
increased protection against the loss of viscosity than do conventional
good quality mineral oils. The inherently high viscosity index of these
oils provides higher viscosities and therefore greater film thickness at
higher temperatures and lower viscosities for easy start-up and mini-
mal internal friction at lower temperatures. The low coefficient of
friction of the Summit Syngear® SH®-7000 Series lubricants sub-
stantially reduces power consumption and gearbox operating tempera-
ture, further prolonging the useful life of the lubricant.
APPLICATION
Summit Syngear® SH®-7000 Series lubricants are recommended
for use under severe high or low temperature conditions when lubricating
industrial enclosed gears and heavily loaded plain or rolling element
bearings. They are particularly recommended for applications where
high oil temperatures result in short oil life or high maintenance costs.
Summit Syngear® SH®-7032, SH®-7046 and SH®-7068 may be used in
piston or gear type pumps, expecially where pressures exceed 1000
psi or when operating over a wide temperature range. Use Summit
Syngear® SH®-7032 through Syngear® SH®-71000 for applications
where the corrosion of yellow metals is a concern, as these lubricants do
not contain additives which tend to attack metals such as brass, bronze or
copper.
The Summit Syngear® SH®-7000 Series lubricants are compatible with
essentially all seal materials, plastics and paints, including nitrile Buna N,
neoprene, viton, teflon, polyethylene, polyurethane ether, fluorocarbon,
polyacrylate, polysulfate, ethylene acrylic, epoxy, plastisol, PVC,
acrylic paint and lacquer.
Prod
uct D
ata
Shee
t SYNTHETIC GEARS / BEARINGS
Page 1 of 2
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
on
stit
ute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
July
15,
2013
SYNTHETIC GEARS / BEARINGS
SYNGEAR® SH ®-7000 SERIES
SY
NG
EA
R®
SH
®-7
032
SH
®-7
046
SH
®-7
068
S
H®
-7100
S
H®
-7150
S
H®
-7220
S
H®
-7320
S
H®
-7460
SH
®-7
680
SH
®-7
1000
ISO
Gra
de
32
46
68
10
01
50
22
03
20
46
06
80
10
00
AG
MA
Nu
mb
er
--
23
4
56
78
8A
Sp
eci
fic G
ravi
ty0
.85
10
.84
90
.85
70
.85
90
.86
50
.86
90
.87
40
.88
10
.88
50
.89
0
Vis
cosi
ty
@ 4
0°C
, cS
t3
1.6
46
.06
4.6
97
.81
48
.42
33
.03
33
.74
88
.07
29
93
7.0
@ 1
00
°C,
cSt
5.8
7.8
10
.11
3.8
18
.92
6.3
34
.54
4.5
59
.56
8.0
@ 1
00
°F,
SU
S1
63
23
63
29
50
27
65
12
08
17
38
25
57
38
41
50
65
@ 2
10
°F,
SU
S4
5.7
5
2.4
60
. 4
74
.6
96
.01
29
16
72
15
28
83
38
Vis
cosi
ty I
nd
ex
12
61
38
14
31
42
14
41
45
14
71
44
14
61
44
Fla
sh P
t. F
°(C
°)4
50
(2
32
)
47
5 (
24
6)
48
0 (
28
9)
47
5 (
24
6)
49
5 (
25
7)
4
75
(2
46
)4
75
(2
46
)4
75
(2
46
)5
20
(2
71
)5
20
(2
71
)
Po
ur
Pt.
F°(
C°)
-65
(-5
4)
-40
(-4
0)
-44
(-4
2)
-44
(-4
2)
-47
(-4
4)
-45
(-4
3)
-40
(-4
0)
-38
(-3
9)
-30
(-3
4)
-27
(-3
3)
Co
pp
er
Co
rro
sio
n1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A
Ru
st T
est
Pa
ssP
ass
Pa
ssP
ass
P
ass
Pa
ssP
ass
Pa
ss
Pa
ssP
ass
FZ
G G
ea
r Te
st11
1111
1111
1111
1111
11
Pa
ssP
ass
Pa
ssP
ass
P
ass
Pa
ssP
ass
Pa
ss
Pa
ssP
ass
Ph
ys
ica
l P
rop
ert
ies
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Physical PropertiesSYNGEAR® WT-100 WT-150 WT-220 WT-320
ISO Grade 100 150 220 320
Viscosity
@ 40ºC, cSt 98 153 237 338
@ 100ºC, cSt 13.5 18.8 25.9 33.7
Viscosity Index 138 138 140 142
Specific Gravity 0.863 0.868 0.869 0.876
Pour Point, ºF (ºC) -42(-41) -44(-42) -46(-43) -44(-42)
Flash Point, ºF (ºC) 510(266) 460(238) 460(238) 465(241)
Copper Corrosion 1A 1A 1A 1A
Rust Test Pass Pass Pass Pass
4-Ball Wear Scar, mm 0.34 0.40 0.40 0.34
FZG gear test rig, 12+ 12+ 12+ 12+
A/8.3/90, DIN ISO 14635-01,
scuffing load stage
August
2,
2011
SYNGEAR® WT SeriesSummit Syngear® WT Series lubricants are fully synthetic high
performance gear oils enhanced with new generation anti-micropitting
additives. The PAO base oil has outstanding oxidation and thermal
stability, naturally high viscosity index and excellent low temperature
pumpability and fluidity. The additive system not only minimizes scuffing
wear, but offers a high level of resistance to micropitting fatigue. High
load carrying capability and low sludge formation make these superior
lubricants a choice for many industrial applications. Syngear® WT
Series provides maximum protection against rust, corrosion, and foaming.
APPLICATION
Summit Syngear® WT Series are recommended for highly loaded
enclosed gearing as well as plain and rolling element bearings. These
shear stable lubricants resists damage to gear teeth caused by repeated
shock loads. Syngear® WT Series lubricants are ideal for wind turbine
gearboxes, mine hoist gearboxes, crane gearing, and other enclosed
gearing which requires micropitting resistance. Highly loaded gearboxes
in the steel, paper and cement industries are natural applications. These
extended life oils perform very well in extreme environments.
SYNTHETIC GEARS / HEAVY DUTY
Prod
uct D
ata
Shee
tN
OT
E: T
he in
form
atio
n in
this
pub
licat
ion
is th
e re
sult
of c
aref
ul te
stin
g in
our
labo
rato
ries,
com
plem
ente
d by
sel
ecte
d lit
erat
ure.
It d
oes
not i
n an
y w
ay c
onst
itute
a g
uara
ntee
, nor
doe
s it
serv
e as
a li
cens
e to
ope
rate
any
pat
ent.
Due
to w
idel
yva
ryin
g co
nditi
ons
of p
rodu
ct u
se, w
hich
are
bey
ond
our c
ontro
l, it
is s
trong
ly re
com
men
ded
that
the
prod
uct b
e te
sted
for s
uita
bilit
y. P
rodu
ct ty
pica
l pro
perti
es in
this
pub
licat
ion
are
curr
ent a
s of
May
13,
200
2.
P.O
. Box
131
359
• Tyl
er, C
R 2
120,
Tex
as 7
5713
, Pho
ne 9
03.5
34.8
021
• Fax
903
.581
.437
6SYNTHETIC GEARS / HEAVY DUTY
SYNTENAL CD-50 EQ Summit Syntenal CD-50 EQ is a fully synthetic manualtransmission lubricant for year-round use in off-and-onhighway equipment. Syntenal CD-50 EQ is suitable fortransmissions and gear cases where API GL-1 throughGL-3 gear protection is required. It also has a very lowpour point and an inherently high viscosity index forexcellent cold temperature flow as well as enhancedhigh temperature lubricating properties. SummitSyntenal CD-50 EQ is designed to meet the require-ments of Eaton and Rockwell transmissions.
PRODUCT CD-50 EQ
SAE Grade 50Specific Gravity 0.8660
Flash Point, °F (°C) 465 (240)
Pour Point, °F(°C) -40 (-40)
Viscosity
@ 40°C, cSt 155@ 100°C, cSt 19.8@ 100°F, SUS 802@ 210°F, SUS 100
Viscosity Index 147
Foaming TendencySeq I 0/0Seq II 0/0Seq III 0/0
Customer BenefitsSuperior lubrication at all temperaturesLonger gear lifeIncreased fuel economy
Physical Properties
May
26,
200
4
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f Ja
nuar
y 2
7,
2011.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
January
27,
2011
Operating
Temperature Range 20 to 600°F
Viscosity
@ 40°C, cSt 42.7
@ 100°C, cSt 6.5
Flash Point, ºF (ºC) 460 (238)
Fire Point, ºF (ºC) 495 (257)
Pour Point, ºF (ºC) 10 (-12)
% Volatility - Noack 12.0
Gravity, ºAPI 31.7
HEAT TRANSFER FLUID
THERMOYLE-46P Summit Thermoyle-46P Performance Plus oil was designed tomeet the tough thermal demands placed on high temperature heattransfer mediums. The hydrogenated base stock is well suited tocombat the problems of carbon formation on heated surfaces anddecreased fluid life as is commonly encountered with conven-tional petroleum-based fluids without exhibiting the hazardouscharacteristics found in aromatic heat transfer fluids.
Physical PropertiesPRODUCT 46P
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f D
ecem
ber
2,
2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Decem
ber
2,
2010
Operating Temp Range -50 to 500°F -20 to 600°F 0 to 575°F
Viscosity@ 0 ºF, cSt 49.80 326.00 812.00@100 ºF, cSt 5.30 18.20 31.85@200 ºF, cSt 1.70 4.38 5.67@300 ºF, cSt N/A 1.96 2.63@400 ºF, cSt N/A 1.11 1.39@500 ºF, cSt N/A 0.71 0.84@600 ºF, cSt N/A 0.50 0.56
Viscosity@ 0 ºF, cPs 40.55 271.69 682.06@100 ºF, cPs 4.22 14.89 26.29@200 ºF, cPs 1.32 3.52 4.60@300 ºF, cPs N/A 1.54 2.09@400 ºF, cPs N/A 0.86 1.08@500 ºF, cPs N/A 0.54 0.65@600 ºF, cPs N/A 0.37 0.42
Density@ 0 ºF, lbs/gal 6.781 6.941 6.996@100 ºF, lbs/gal 6.633 6.815 6.873@200 ºF, lbs/gal 6.471 6.688 6.752@300 ºF, lbs/gal 6.339 6.562 6.630@400 ºF, lbs/gal 6.192 6.436 6.508@500 ºF, lbs/gal 6.044 6.310 6.386@600 ºF, lbs/gal 5.897 6.184 6.264
Flash Point, ºF (ºC) 330 (166) 455 (235) 485 (252)
Fire Point, ºF (ºC) 355 (179) 485 (251) 510 (266)
Autoignition Temperature, ºF (ºC) 615 (324) 650 (343) 670 (354)
Pour Point, ºF (ºC) -100 (-73) -100 (-73) -90 (-68)
Vapor Pressure, mm Hg300°F 11.5 --- .7400°F 73 4.1 3.8500°F 300 20 14600°F --- 82 55
Thermal Conductivity,BTU/Hr Ft °F300°F .077 080 .085400°F .072 .076 .083500°F .069 .073 .081
Boiling Range10% 590°F 780°F 798°F90% 660°F 840°F 950°F
SYNTHETIC HEAT TRANSFER FLUIDS
THERMOYLE HT SERIESSummit Thermoyle HT Series was designed to meet the tough ther-mal demands placed on high temperature heat transfer mediums. The syn-thetic hydrocarbon base stock is well suited to combat the problems ofcarbon formation on heated surfaces and decreased fluid life as iscommonly encountered with conventional petroleum-based fluids with-out exhibiting the hazardous characteristics found in aromatic heattransfer fluids. The additional benefits of an extremely low vaporpressure and sub-zero pour points allow for increased efficiency whilereducing pressure build-up and evaporation losses.
Physical PropertiesPRODUCTS 50HT 100HT 200HT
SYNTHETIC BLEND AIR COMPRESSOR
TM SERIES The Summit TM Series is formulated from highly refined hydro-cracked base stocks and the unique additive SYNTHOLATE. Theaddition of SYNTHOLATE inhibits the formation of varnish andcarbon and provides superior thermal and oxidative stability.Utilizing the superior petroleum base stocks fortified withSYNTHOLATE extends the life of the Summit TM Seriescompared to that of conventional mineral oils and provides thefollowing money saving benefits:
•Improved rust and oxidation protection versus general or multi-purpose
R&O circulation oils.
•Reduced lubricant consumption - Extended drain intervals and lower
vapor pressures reduce lubricant consumption.
•Reduced maintenance - SYNTHOLATE reduces carbon and
varnish formation thus extending valve life and the time interval
between overhauls.
•Eliminates recompression - SYNTHOLATE keeps the valves clean
and eliminates the primary cause of recompression.
•Reduced power consumption - Elimination of recompression and
reduced coefficient of friction result in less power consumption per
unit of compression.
•Improved safety - Higher flash points provide a greater margin of
safety in air compression.
Physical PropertiesPRODUCTS TM-10 TM-15 TM-20 TM-30 TM-40
ISO Grade 32 46 68 100 150
Viscosity
@ 40°C, cSt 31.2 46.0 66.3 99.2 146.6
@ 100°C, cSt 5.27 6.72 8.48 11.24 14.59
@ 100°F, SUS 163 237 346 524 769
@ 210°F, SUS 43.9 48.7 54.8 64.7 77.9
Viscosity Index 99 98 97 99 98
Specific Gravity 0.877 0.876 0.876 0.876 0.879
Pour Point, °F (°C) -44 (-42) -25 (-32) -38 (-38) -33 (-36) -27 (-33)
Flash Point,°F (°C) 440 (227) 470 (243) 470 (243) 520 (271) 495 (257)
Four Ball Wear, mm 0.6 0.6 0.6 0.8 0.60.6
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
on
stit
ute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
800.7
49.5
823 •
Fax
903.5
81.4
376
May 1
, 2012
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
SYNTHETIC AIR COMPRESSOR
SUMMIT ULTIMA® SERIES
Summit Ultima® is a high performance lubricant formulat-ed specifically to outperform other synthetic rotary compressorlubricants on the market. Ultima employs a unique basestock that allows improvements in oxidation resistance andsludge and deposit formation over conventional syntheticbase stocks. It is also compatible with existing O.E.M.provided lubricants. Please contact your Summit represen-tative for additional information.
Physical Properties
PRODUCTS Ultima-32 Ultima-46 Ultima-68
ISO Grade 32 46 68
Viscosity
@ 40°C, cSt 32.2 50 63.2
@ 100°C, cSt 5.61 7.35 9.28
@ 100°F, SUS 166 257 325
@ 210°F, SUS 45.1 50.9 57.5
Viscosity Index 113 108 126
Specific Gravity 0.899 0.921 0.920
TAN 0.34 0.28 0.28
Flash Point, °F (°C) 495 (257) 490 (254) 490 (254)
Pour Point, °F (°C) -71 (-57) -49 (-45) -49 (-45)
RPVOT, Avg. Minutes 2940 3600 3600
Rust Pass Pass Pass
Emulsion Tendency 40/40/0 40/40/0 40/40/0(10 mins.) (20 mins.) (20 mins.)
June 1
5,
2010
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Marc
h 9
, 2012
SYNTHETIC BLEND GEARS/BEARINGS FOOD GRADE
UNIPAR FG SERIESUniPar FG Series gear oils are specially formulated for gearsystems operating in the food service and packaging industries.UniPar FG Series lubricants are NSF Registered and meet USDA 1998(H-1) guidelines (lubricants with incidental food contact). In addition,these gear oils are Kosher/Halal approved and CFIA accepted. Summitis an ISO 21469 certified facility. UniPar FG lubricants are fortifiedwith oxidation inhibitors as well as anti-wear/EP additives to pass thehighest stages of the FZG test.
UniPar FG Series gear oils are ideal for the lubrication of productionequipment in beverage canning, bottling operations, meat and poultryprocessing, dairy operations, fruit and vegetable processing, bakeries,and pharmaceutical plants.
UNIPAR FG-150 FG-220 FG-320 FG-460 FG-680
ISO Grade 150 220 320 460 680
Specific Gravity 0.875 0.878 0.880 0.883 0.883
Viscosity @ 40°C, cSt 146 226 341 483 700@ 100°C, cSt 14.5 19.3 31.0 40.2 54.3
Viscosity Index 98 96 127 129 136
Flash Point, °F 445 445 445 445 460(°C) (229) (229) (229) (229) (238)
Fire Point, °F 485 480 485 485 490(°C) (252) (249) (252) (252) (254)
Pour Point, °F 0 -6 5 0 -6(°C) (-18) (-21) (-15) (-18) (-21)
FZG Gear Test 12+ 12+ 12+ 12+ 12+Pass Pass Pass Pass Pass
NSF Registered H1 H1 H1 H1 H1
ISO 21469 Yes Yes Yes Yes Yes
Kosher Approved Yes Yes Yes Yes Yes
Halal Certified Yes Yes Yes Yes Yes
CFIA Accepted Yes Yes Yes Yes Yes
Physical Properties
Shelf Life: Product shelf life is 3 years from the date of manufacture, after
which the product should be recertified prior to use.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120,
Tex
as 7
5713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
Septe
mber
20,
2011
LUBRICANT ADDITIVE
VARNASOLVEquipment Varnish Cleaner
The use of petroleum lubricants, mainly automatic transmission
fluid (ATF), in rotary screw compressors, rotary vane compressors
and other high temperature equipment, results in varnish and
carbon formation. The varnish and carbon deposited throughout
the equipment can cause many serious operational problems,
resulting in excessively high maintenance costs.
Varnasolv can help reduce the problems caused by varnish and
carbon. Varnasolv should be added to the existing lubricant to
remove and suspend varnish while the equipment is running.
Using Varnasolv eliminates the need for disassembling the
equipment for cleaning. For maximum benefit, use Varnasolv
before each lubricant change. Varnasolv is NSF Registered
HX-2
Additonal applications for Varnasolv include cleaning
hydraulic systems, gearboxes, and high temperature chains.
Varnasolv can also be used for cleaning Heat Transfer systems
with temperatures up to 400°F.
HOW TO USE VARNASOLV
Cleaning Hydrocarbon Deposits from Equipment
Initial Clean-Out Method
Add one gallon of Varnasolv concentrate to each ten gallons of oil
in the unit, first draining enough oil to allow adding the Varnasolv.
Continue to run the equipment for 20 to 40 hours, allowing the
treated oil to disperse and suspend the varnish. To avoid re-
depositing the suspended contaminants, drain the oil while warm
and replace filters. Refill with new oil.
Packing: Varnasolv is available in cases (six gallons), five gallonpails or 55 gallon drums.
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es,
com
ple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itute
a g
uar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y
var
yin
g c
ondit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f Ja
nuar
y 2
5,
2011.
P.O
. B
ox 1
31359 •
Tyle
r, T
exas
75713,
Phone
903.5
34.8
021 •
Fax
903.5
81.4
376
January
25,
2011
LUBRICANT ADDITIVE
Wind Turbine CleanerVarnish and Sludge Cleaner
Wind turbine gearbox lubricants perform in difficult
environments. Shock loading, extended oil drain serv-
ice intervals, temperature and humidity extremes can
rapidly break down the best formulated lubricants, pro-
ducing varnish and sludge as natural decomposition by-
products. Summit’s Wind Turbine Cleaner is the
most effective lubricating system conditioner avail-
able to clean and remove these performance robbing
deposits.
Clean-Out Procedure:
Simply replace 10% of the existing oil charge with an equal
amount of Summit Wind Turbine Cleaner, and then
operate normally for a minimum of 48 hours. As the
warm oil is drained from the gearbox reservoir, the varnish,
sludge, and carbonaceous gunk in suspension will be
removed. If installed, check oil filters and change after
the cleaning procedure. A thorough periodic cleaning
of the gearbox lubricating system before a scheduled oil
change ensures peak lubricant performance and restores
the system to like-new condition.
Summit’s Wind Turbine Cleaner is compatible with all
commonly used lubricants, mineral or synthetic; and, all
common elastomers, paints and plastics. Please consult
your Summit representative for more information.
PHYSICAL PROPERTIES
Viscosity, 40ºC, cSt 78
Specific Gravity, 60ºF 0.985
Density, 60ºF 8.20 lbs/gal
Flash Point 193ºC / 380ºF
NSF Registered HX-2
Prod
uct D
ata
Shee
tN
OT
E:
The
info
rmat
ion i
n t
his
publi
cati
on i
s th
e re
sult
of
care
ful
test
ing i
n o
ur
labora
tori
es, co
mple
men
ted b
y s
elec
ted l
iter
ature
. It
does
not
in a
ny w
ay c
onst
itu
te a
guar
ante
e, n
or
does
it
serv
e as
a l
icen
se t
o o
per
ate
any p
aten
t. D
ue
to w
idel
y v
aryin
g
condit
ions
of
pro
duct
use
, w
hic
h a
re b
eyond o
ur
contr
ol,
it
is s
trongly
rec
om
men
ded
that
the
pro
duct
be
test
ed f
or
suit
abil
ity.
Pro
duct
typic
al p
roper
ties
in t
his
publi
cati
on a
re c
urr
ent
as o
f N
ovem
ber
9, 2010.
P.O
. B
ox 1
31359 •
Tyle
r, C
R 2
120, T
exas
75713, P
hone
903.5
34.8
021
• F
ax 9
03.5
81.4
376
SUPER INDUSTRIAL DEGREASER & CLEANER
Xtra-CleanSummit Xtra-Clean is a water-based, environmentally safe,industrial-strength degreaser and cleaner which will quickly liftand suspend oil and dirt. It is specially developed to clean oilyand greasy surfaces such as oil rigs, engines and cleaning vats witha synthetic detergent that provides a noncaustic cleaner. Xtra-Cleanis biodegradable, nonflammable, nonabrasive, noncorrosive andnontoxic making it safe for use in many applications. It is NSFregistered A8 and C1.
Directions: Circulate, soak or wipe on and rinse thoroughly. Forbest results in cleaning vats, 12 hours of mild heat and agitationfollowed by pressure rinse is recommended.
Physical Properties
PRODUCTS Xtra-Clean
pH: 13.0
Color: Clear
Odor: Fresh
Density: 8.34 lbs/gal
Flash Point: None
Rinse Ability: Completely
Type Cleaner Water Soluble
Degreaser
Active Ingredients: Detergents, Builders
Soluble Solvents
Degreasing Efficiency Excellent
Specific Gravity 1.045
Stability (Hot or Cold): Excellent
Ferrous Metals None
Non-Ferrous Metals None
NSF Registered A8 and C1
Caution: Contains alkaline silicates. May be harmful if swallowed.
Can cause eye and skin irriation
Novem
ber
9,
2010
