PRODUCT DATASHEETMirella serieslast update 2/11/2016
DETAILS
Product Number CN14211_MIRELLA-XW-CL-PF-VERO13
Family Mirella
Type RefPack
Color white
Diameter 49,9 mm
Height 23,96 mm
Style round
Optic Material HRPC
Holder Material
Fastening
Status production ready
ROHS Comliant Yes
Date Updated 2/11/2016
OPTICAL PROPERTIES Viewing Light Effi-
LED Angle Beam ciency cd/lm Connector
VERO13 71 deg 87 % 0.600 -
Xenio Point 13mm 71 deg 89 % 0.610 LEDiL: LEDiL
CLL03x/CLU03x 69 deg 78 % 0.560 Bender Wirth: 433 Typ L1
CLU720/721 68 deg 83 % 0.620 Bender Wirth: 433 Typ L1
CLU700/701 68 deg 86 % 0.710 Bender Wirth: 434 Typ L1
CLL02x/CLU02x (LES10) 68 deg 85 % 0.650 Bender Wirth: 434 Typ L1
CXA/B 15xx 68 deg 86 % 0.660 Bender Wirth: 441 Typ L1
LUXEON CoB 1202s 67 deg 86 % 0.720 Bender Wirth: 452 Typ L1
LUXEON CoB 1202/1203 69 deg 84 % 0.600 Bender Wirth: 438 Typ L1
LUXEON CoB 105/107/109 sim: 67 sim: 86 % sim: 0.720 Bender Wirth: 452 Typ L1
CXM-14 sim: 69 sim: 78 % sim: 0.600 Bender Wirth: 433 Typ L1
CXM-9 sim: 68 sim: 85 % sim: 0.650 Bender Wirth: 434 Typ L1
NSBxL066A/NFCxL036B 68 deg 85 % 0.640 Bender Wirth: 438 Typ L1
S024B/S024Z sim: 67 sim: 86 % sim: 0.720 Bender Wirth: 452 Typ L1
L121A/L060B/L024Z 69 deg 83 % 0.610 Bender Wirth: 438 Typ L1
Soleriq P9 69 deg 85 % 0.650 Bender Wirth: 461 Typ L1
Soleriq P6 68 deg 87 % 0.720 Bender Wirth: 446 Typ L1
ZC12/18 sim: 69 sim: 78 % sim: 0.560 Bender Wirth: 433 Typ L1
ZC4/6 sim: 68 sim: 85 % sim: 0.650 Bender Wirth: 434 Typ L1
December 9th 2016 22:02 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland
http://www.ledil.com email: [email protected] FAX: +358-2-733 8001
AH BG
DE CF BG AH
33
22
44
11
SCALE 3:2 WEIGHT (g) SHEET 1/1
SIZE
A3
DRAWING TITLE
Datasheet_Mirella-CL-PFPART NUMBER
Assembly
Ledil OySalorankatu 10FIN 24240 SALOFinland
THIRD ANGLE PROJECTION:
This drawing is the propertyof LEDiL Oy. It may not bereproduced, copied orcommunicated without a writtenagreement with LEDiL Oy.
INDEX PART NO DESCRIPTION MATERIAL1 C13333 MIRELLA-CL PC2 C13709 MIRELLA-SOCKET-VERO13/18 PC3 - MIRELLA-PF -
1
2
3
This drawing applies to:CN14211_MIRELLA-XW-CL-PF-VERO13CN14214_MIRELLA-50-S-CL-PF-VERO13CN14216_MIRELLA-50-M-CL-PF-VERO13CN14218_MIRELLA-50-W-CL-PF-VERO13
Tolerances if not otherwise shownAccording to DIN ISO 2768-1Linear measures:Up to 30mm class M, otherwise class C.According to DIN ISO 2768-2Form and position: class L
24.01
1.2
4 9.9
NOTE: It is recommended to use glue like DELO-PUR 9895 for pin fastening.
http://www.delo.de/fileadmin/datasheet/DELO-PUR_9895_(TIDB-GB).pdf
NOTE: The typical divergence will be changed by different color, chip size and chip positiontolerance. The typical total divergence is the full angle measured where the luminous intensityis half of the peak value.GENERAL INFORMATION
- Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible.
Note! Due to use of high power COB's with this product, special attention to proper thermal design is highlyrecommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiLproducts being used outside of the recommended temperature range.