Product Catalogue · GM-LL-A-025, GM 4718M, GM 6094M. • ILSAC: GF-5, GF-4 • API: SN, SN-RC, SM,...

First choicefor oils

Product Catalogue

Our state of the art blending plant produces a range of high quality oil products based on our ongoing partnership with leading international base oil and additive suppliers. We only use product’s that meet and exceed the relevant API and SAE standards.

The product range includes oils for a wide range of automotive, industrial, agricultural, transport and heavy equipment applications (diesel and petrol engine oils, gear oils, automatic transmission oils, coolants and brake fl uids and specialty products).

Our lubricant range of over 450 line items consists of full synthetic, semi-synthetic and mineral oils, greases, specialty products, solvent degreaser, hand cleaner, emergency spill kits and dispensing equipment such as grease guns and oil pumps.

INTRODUCING HI-TEC OILSFIRST CHOICE FOR OILS

SnapshotHead Offi ce Site Area: 2.5 acres Base Oil Storage:

In excess of 980,000 Lt.Buildings:Dispatch: 3,500 Sq.m

Blending Vessels: 5 Base Oil Suppliers:International raw material suppliers

Product Sizes:Oils: Bulk, 1000L IBC, 200L and 60L Drum, 20L, 10L, 5L, 4L, 1L, 500ml and 200ml.Grease: 400g, 450g, 500g, 2.5kg, 20kg, 55kg, 180kg, bulk.

Base Oil Stocks:Mineral, Semi-SyntheticFull SyntheticGroup I MineralGroup IIGroup III SyntheticEster SyntheticPAO Synthetic

Over 450 products: Automotive, Industrial, Commercial, Agriculture, Mining, Forestry and specialty and many more.

Distribution offi ces: Sydney, Newcastle, Canberra, Melbourne, Tasmania, Adelaide, Port Lincoln, Perth, Darwin and Brisbane.

Product Category: Petrol & Diesel oils, Transmission & Gear oils, Hydraulic, Industrial Gear oils, Compressor and speciality products, toll blending.

Hi-Tec Oils is an Australian owned company with more than 200 years of total workforce experience in lubricants. We are one of Australia’s largest independent oil manufacturers, with warehouses in every state and territory of Australia, managed by Hi-Tec Oils staff.

11

CONTENTS

DIESEL ENGINE OILS

PETROL AND LIGHT DIESEL ENGINE OILS

AGRICULTURAL AND FARM OILS

TRANSMISSION OILS

AUTOMOTIVEGEAR OILS

INDUSTRIAL OILS

COOLANTS & BRAKE FLUIDS

SPECIALTY PRODUCTS

p2-8

p9-10

p11

p12-14

p15-17

p18-25

p26-28

p29-33

GREASES

MERCHANDISE

p34-36

p37

hi-tecoils.com.au


FULL SYNTHETIC OILS

SYNPLUS SN/CF 5W/30Hi-Tec Synplus® SN/CF 5W30 is a full synthetic, low SAPS next generation oil designed for the latest super high performance, multivalve, overhead cams, turbo and light diesel engines requiring a low viscosity lubricant for better fuel economy for your vehicle. It is especially suited for vehicles fi tted with DPF and catalytic converters to assist in lower exhaust emissions and fuel economy.

SYNPLUS DL-1 5W/30Hi-Tec Synplus DL-1 ACEA C1, C2 5W30 is a full synthetic, low to mid SAPS, super high performance engine oil which combines the latest development in oil formulation and additive technology to provide a lubricating oil with the highest level of protection whilst promoting fuel effi ciency in modern low friction diesel engines.

SYNPLUS SN/CF 5W/40Hi-Tec Synplus® SN/CF 5W40 is a full synthetic, low SAPS next generation oil designed for the latest super high performance, multivalve, overhead cams, turbo and light diesel engines requiring a low viscosity lubricant for better fuel economy for your vehicle. It is especially suited for vehicles fi tted with DPF and catalytic converters to assist in lower exhaust emissions and fuel economy.

SYNPLUS 504/507 5W/30Hi-Tec Synplus 504/507 is a full synthetic 5W30 high performance engine oil which combines the latest development in oil formulation and additive technology to provide lubricating oil with the highest level of protection.

SYNPLUS DXS 5W30Hi-Tec Synplus DXS 5W30 is a full synthetic, high performance petrol engine oil designed to meet the General Motors Dexos 1 performance standards.

It combines the latest development in oil formulation and additive technology to provide a lubricating oil with the highest level of protection whilst promoting fuel effi ciency in modern low friction engines.

Performance Levels:• API: SN, SM, SL, SJ, SH, CF, CE, CD• ACEA: A3/B4-08, A3/B3-08, C3-10• Mercedes Benz 229.31, 229.51 • BMW Longlife LL-04• Dexos 2

Product Sizes:1L, 5L, 10L, 20L, 200L, 1000L and Bulk

Performance Levels:• ACEA: C1, C2 (2010)• JASO: DL-1• Ford: WSS-M2C-934B

Product Sizes:5L, 20L, 200L, 1000L and Bulk

Performance Levels:• API: SN, SM, SL, SJ, SH, CF, CE, CD• ACEA: A3/B4-08, A3/B3-08, C3-10• Mercedes Benz: 229.31, 229.51• BMW Longlife: LL-04• Porsche: A40• Dexos 2


Performance Levels:• Volkswagen VW 504.00• Volkswagen VW 507.00• ACEA A3/B4-04• MB 229.51• BMW Longlife LL-04


Performance Levels:• General Motors: Dexos 1,

GM-LL-A-025, GM 4718M, GM 6094M. • ILSAC: GF-5, GF-4• API: SN, SN-RC, SM, SL, SJ, SH


2

First Choice for Oils

FREECALL: 1300 796 009 | E: [email protected] | F: (02) 9604 1611FREECALL: 1300 796 009 | E: [email protected] | F: (02) 9604 1611


FULL SYNTHETIC OILS

SYNPLUS A5/B5 5W/30Hi-Tec Synplus A5/B5 5W30 is a full synthetic, low SAPS, high performance engine oil which meets both the ACEA A5/B5 and Ford WSS-M2C-913C specifi cations. It combines the latest developments in oil formulation and additive technology to provide a lubricating oil with the highest level of protection, whilst promoting fuel effi ciency and lowering emissions in modern low friction engines.

SYNPLUS A5/B5 0W/30Hi-Tec Synplus A5/B5 SL/CF 0W30 is a full synthetic, low SAPS, high performance engine oil which combines the latest development in oil formulation and additive technology to provide a lubricating oil with the highest level of pro-tection whilst promoting fuel effi ciency in modern low friction engines.

SYNPLUS SN GF5 OW/20 & 5W20Hi-Tec Synplus SN GF5 0W20 & 5W/20 is the ultimate full synthetic lubricant for engine protection and fuel effi ciency. It meets and exceeds the latest API SN specifi cation, has ILSAC GF-5 fuel effi ciency performance, is able to be used for older API petrol specifi cations, and has been particularly developed for vehicles requiring the thinner API 0W20 viscosity grade (such as some later model Subaru vehicles).

SYNPLUS ACEA C4 5W30Hi-Tec Synplus ACEA C4 5W30 is a full synthetic, low to mid SAPS, high performance engine oil which combines the latest development in oil formulation and additive technology to provide a lubricating oil with the highest level of protection whilst promoting fuel effi ciency in modern low friction diesel engines.

Performance Levels:• ACEA: A5/B5-10• Ford: WSS-M2C-913C, WSS-M2C-913B, WSS-M2C-913A

Product Sizes:5L, 20L, 200L and Bulk

Performance Levels:• API: SL, SJ, SH, CF, CE, CD• ACEA: A5/B5-08


Performance Levels:• API: SN, SM, SL• API Resource Conserving• ILSAC: GF5, GF4, GF3


Performance Levels:• ACEA: C4 (2008)• Renault: RN 0720

Product Sizes:5L, 20L and 200L

SYNPLUS LL-01 5W/30 & 5W/40Hi-Tec Synplus LL-01 5W30 is a full synthetic, mid SAPS, super high performance engine oil which combines the latest development in oil formulation and additive technology to provide lubricating oil with the highest level of protection.

Performance Levels:• API: SN, SM, SL, CF• ACEA: A3/B3-08, A3/B4-08• BMW Longlife LL-01• Mercedes Benz 229.5 • VW 50200, 50500• Opel/GM LL-B-025• Renault RN0700, RN0710


3

hi-tecoils.com.au

SYNPLUS SM/CF 10W/50Hi-Tec Synplus SM/CF 10W50 is a full synthetic, low SAPS, super high performance engine oil which combines the latest development in oil formulation and additive technology to provide a lubricating oil with the highest level of protection.

Performance Levels:• API: SM, SL, SJ, SH, CF, CE, CD• ACEA: A3/B4-04, C3-04


FULL SYNTHETIC OILS

HTO SN/CF 10W/50HTO (PAO) SN/CF is a full synthetic super high performance engine oil which combines the latest development in oil formulation and additive technology to provide a lubricating oil with the highest level of protection.

Performance Levels:• API: SN, SM, SL, SJ, SH/ CF, CD, CE


HTO SN/CF 10W/60HTO (PAO) SN/CF 10W60 is a full synthetic super high performance engine oil which combines the latest development in oil formulation and additive technology to provide a lubricating oil with the highest level of protection.

Performance Levels:• API: SN, SM, SL, SJ, SH/ CF, CD, CE


4



FREECALL: 1300 796 009 | E: [email protected] | F: (02) 9604 1611

SEMI SYN SM/CF 10W/40Hi-Tec Semi Syn SM/CF 10W40 is a semi synthetic engine oil suitable for most types of normally aspirated and turbo petrol and light diesel engines operating under both the most severe and varied conditions, such as high temperature motorway driving and low temperature stop-and-go driving. It is also suitable for engines with small clearances, helping to provide improved engine protection and promoting fuel economy.

Performance Levels:• API: SM, SL, SJ, SH, CF, CE, CD• Ford M2C.153E

Product Sizes:1L, 5L, 20L, 200L, 1000L and Bulk

MINERAL ENGINE OILS

PREMIER LITE SM 10W/30Hi-Tec Premier Lite SM 10W/30 is a premium mineral oil suitable for most types of normally aspirated and turbocharged petrol and light diesel engines especially those with small clearances. It is strongly recommended for modern multivalve twin cam engines where a low temperature viscosity is required for cold starts, fuel economy and lower emissions.

Also available in SL/CF grade

Performance Levels:• API: SM, SL, SJ, SH, CF, CE, CD• Ford M2C.153E


PREMIER SM 15W/40Hi-Tec Premier SM 15W/40 is a premium mineral oil suitable for modern naturally aspirated, turbocharged petrol and light diesel engines. It covers a wide variety of vehicles providing excellent start up viscosity whilst maintaining protection at high temperatures.

Also available in SL/CF grade

PREMIER SL 20W/50Hi-Tec Premier SL 20W/50 is a mineral oil suitable for most types of normally aspirated and turbocharged petrol and light diesel engines. It is an excellent choice where a thicker 20W/50 is required to provide protection at higher temperatures.

Also available in SJ 20W/50 in 4L packs only

Performance Levels:• API: SM, SL, SJ, SH, CF, CE, CD


Performance Levels:• API: SL, SJ, SH, CF, CE, CD


PREMIER SL/CF 15W/50Hi-Tec Premier SL 15W/50 exceeds SL/CF rated performance, and is strongly recommended for all multi-valve and modern engines where a low temperature viscosity is required by the engine manufacturer for cold crank starts, but still providing protection in the engine.

Performance Levels:• API: SL, SJ, SH, CF, CF, CE, CD • Ford M2C. 153E


5


hi-tecoils.com.au

SUPER 60 SAE 25W/60Hi-Tec Super 60 (SAE 25W/60) is a very specialised engine oil for all naturally aspirated and turbocharged four stroke gasoline passenger car and motorcycle engines. It meets and exceeds the API Service Classifi cations SG/CD. It gives vastly improved protection against engine wear, high temperature oxidation deposits and sludge formation as well as protection against low temperature “black sludge” development.

Performance Levels:• API: SG/CD, • FORD M2C.153E (D & C), GM 6085M, 6048M

Product Sizes:1L, 5L, 20L and 200L

SUPER 70 SAE 25W/70Hi-Tec Super 70 (SAE 25W/70) is a very specialised engine oil for naturally aspirated and turbocharged four stroke gasoline passenger car and motorcycle engines. It meets and exceeds the API Service Classifi cations SG/CD. It gives vastly improved protection resistance against engine wear, high temperature oxidation deposits and sludge formation as well as protection against low temperature “black sludge” development.

PREMIER SAE 30Hi-Tec Premier SAE 30 is a well proven monograde engine oil for four stroke petrol (lawn mowers) and normally aspirated diesel engines.

Hi-Tec Premier SAE 30 meets and exceeds the API Service Classifi cations SG/CD. It gives improved protection resistance against engine wear, high temperature oxidation deposits to engines of older passenger cars and it is also recommended for veteran and vintage cars where high viscosity, low additive oils are required.

Performance Levels:• API: SG/CD, • FORD M2C.153E (D & C), GM 6085M, 6048M


Performance Levels:• API: SG/CD• US Military Specifi cation MIL-L-46152B


6

MINERAL ENGINE OILS




SHP 20W/50Hi-Tec Super High Performance SL 20W/50 engine oil is the ultimate in protection and performance. This premium quality engine oil is a complex blend of base oils and chemical additives designed to protect the engine and enhance its performance under extreme operating conditions such as high temperature motorway driving or low temperature stop and go driving.

RACING 50 & 70Hi-Tec Super High Performance Racing Oils are very specialised high performance four stroke racing engine oils, which are specially formulated to ensure trouble-free lubrication of all high stressed racetrack engines.

Hi-Tec Super High Performance Racing Oils are recommended where high octane gasolines and their mixtures and other high energy fuels such as methanol and nitromethane are employed.

Performance Levels:• API: SL, SJ, SH; CF, CD, Ford,

M2C.153E


Performance Levels:• API: SN, SM, SL, SJ, SH/CF, CD, CE


PERFORMANCE OILS

7


hi-tecoils.com.au 8

HP 2 STROKE OILHi-Tec High Performance Two Stroke Oil is designed to be used in high performance top tier two stroke motor cycle engines and power tools. It is formulated from a high quality mineral base stock with detergent additives to create a modern low ash lubricant.

OUTBOARD OIL TCW-3Hi-Tec Outboard Oil TCW-3 is the latest of an evolutionary chain of lubricating oils which was developed to meet the changing needs and increasing severity of water cooled Outboard Engines.

Performance Levels:• JASO FA and FB, ISO-L-EGB and API

TC specifi cations

Product Sizes:200ml, 1L, 4L, 20L and 200L

Performance Levels:• NMMA TC-W3 Recertifi ed• API TC


SYN 2T OILHi-Tec Syn 2T Motor Oil is a premium fully synthetic low ash low smoke two-stroke formulated lubricant with specially developed diester base stock for superior lubricity and performance.

Performance Levels:• API TC• ISO-L-EGB, -EGC and -EGD• JASO FA, FB, FC and FD• TISI requirements for Detergency and Lubricity • Piaggio Hexagon

It is recommended for use in:• HUSQVARNA Chainsaws• ROTAX Snowmobile


2 STROKE OILS



FREECALL: 1300 796 009 | E: [email protected] | F: (02) 9604 1611 9

MULTIGRADE OILS

FLEETMASTER CJ-4 15W/40Hi-Tec Fleetmaster™ CJ-4 15W/40 is a premium heavy duty diesel engine oil ideal for multifl eet applications covering prime movers, medium and light diesels as well as 2 and 4WD vehicles. Suitable for normally aspirated and turbocharged engines. It sustains the effective performance of advanced exhaust-gas after-treatment systems and protects against catalyst poisoning. Suitable for vehicles fi tted with DPF systems.

FLEETMASTER CI-4 15W/40Hi-Tec Fleetmaster™ CI-4 15W/40 is a heavy duty diesel engine oil for use in multifl eet dieselapplications in normally aspirated and turbocharged engines. It is especially effective at sustaining engine durability where cooled EGR and other exhaust emission componentry are used. It meets the performance requirements of many American and European OEMs and associations.

FLEETMASTER J-TEC 15W/40Hi-Tec Fleetmaster™ J-Tec 15W/40 is a shear stable multigrade 15W/40 diesel engine oil designed specifi cally to meet the requirements of modern Japanese diesel engines. It is suitable for both normally aspirated and turbocharged engines.

FLEETMASTER EURO 10W/40Hi-Tec Fleetmaster™ Low SAPS Euro 10W40 is an SAE 10W-40 full synthetic high performance diesel engine oil designed to meet the ACEA E6 and Euro V emission requirements.

Performance Levels:• API: CJ-4, CI-4 PLUS, SM, SL• ACEA: E9, E7, A3/B3/B4.• EURO: V, IV• Global DHD-1, JASO DH-1• CAT ECF-3, ECF-2, ECF-1-A • Cummins CES 20081 • Detroit Diesel PGOS 93K218 • M.A.N. 3275 • Mack EO-O Premium Plus 07 • Mercedes Benz MB 229.1, 228.31, 228.3, 227.1 • MTU Type 2 • Renault RVI RLD-3 • Volvo VDS-4


Performance Levels:• API: CI-4, CH-4, CG-4, CF-4, CF-2, CF, CD, CD-II, SL, SJ • ACEA: E7, E5, E3, E2, A3/B3, A2• EURO: V, IV• Cummins CES 20071, 20072, 20076,

20077, 20078 • M.A.N. 3275 & 271 • Mack EO-N, Mack EO-M Plus • Mercedes Benz MB 229.1, 228.3

Blanket Approval • Volvo VDS-3 • ZF TE-ML 07C


Performance Levels:• API: CI4, CH4, CG4, CF4, SL SJ• ACEA: E7, E5, E3, B4, B3, A3• EURO emission requirements: I, II, III, IV• JASO DH-1, DHD-1; CAT ECF-1• Cummins 20071, 20072, 20076, 20077, 20078• Mack EO-M Plus, EO-M; MAN 3275• Volvo VDS3, VDS2, VDS• ZF TE-ML 07C


Performance Levels:• API: CI-4, CH-4, CG-4, CF-4, CF.• ACEA: E7, E6, E4 (2008 Issue 2).• EURO emission requirements: I, II, III, IV, V.• JASO DH-2• Mercedes Benz: Sheet 228.51, 235.27; • MAN: M3477, M3271-1


DIESEL ENGINE OILS

hi-tecoils.com.au 10

MULTIGRADE OILS

MONOGRADE OILS

FLEETMASTER CNG 15W/40Hi-Tec Fleetmaster™ CNG 15W40 is a shear stable multigrade 15W/40 oil designed specifi cally to meet the requirements of compressed natural gas (CNG) engines powering modern commercial vehicles and buses.

FLEETMASTER 10, 30, 40, 50Hi-Tec Fleetmaster™ Monograde CF oils are available in SAE 10W, 30, 40, & 50 grades. They are high performance diesel engine oils suitable for either turbo-charged or normally aspirated applications.

Hi-Tec Fleetmaster™ Monograde oils are uniquely formulated to promote the highest of standards of engine cleanliness in modern diesel engines requiring a monograde oil.

Performance Levels:• API: CF-2, CF, SG, SF• ACEA: E2 (2004) • Mercedes Benz: MB 227.0, 228.0 blanket • MAN 270


FLEETMASTER ACEA E4 5W/30Hi-Tec Fleetmaster™ ACEA E4 5W/30 is a full synthetic heavy duty diesel engine oil designed specifi cally to meet the UHPD (Ultra High Performance Diesel) lubricant category for vehicles running under severe operating conditions, such as those requiring signifi cantly extended oil drain intervals.

Performance Levels:• ACEA 2010: E4 -08 Issue 2• ACEA 2010: E7 -08 Issue 2• API: CI-4, CH-4, CG-4, CF-4• EURO emission requirements: I, II, III, IV, V

Product Sizes:20L, 200L and Bulk

Performance Levels:• MAN CNG buses approval (MAN M3271-1)• Mercedes Benz MB226.9 • Renault RGD • Scania Gas OSC11 G03, OSC9 G01, OSC9 G02, OSC9 G03 • Suitable for use in most CNG and LPG powered vehicles. • Volvo CNG


PATRICK SOARSManaging DirectorAustralian Native Landscapes Pty Ltd

DIESEL ENGINE OILS



Performance Levels:• ACEA 2010: E4 -08 Issue 2• ACEA 2010: E7 -08 Issue 2• API: CI-4, CH-4, CG-4, CF-4• EURO emission requirements: I, II, III, IV, V

Product Sizes:20L, 200L and Bulk

UNIVERSAL TRANS 10W/30Hi-Tec Universal Trans is a 10W30 grade new generation hydraulic/transmission Universal Tractor Transmission Oil (UTTO) designed for a wide range of power-driven agricultural equipment fi tted with gears, transmissions, differentials, fi nal drives, hydraulic pumps, hydraulic bearings, wet brakes, and power take-off (PTO) clutches.

FARM OIL 15W/40Hi-Tec Farm Oil is a special Super Tractor Oil Universal (STOU) specifi cally formulated to service tractors with just one lubricant where formerly up to four or more oils were required.

Performance Levels:• API: Diesel CF, CF-4, CE, CD, Gasoline SF, Transmission GL-4• ACEA: E2• Caterpillar TO-2• John Deere JDM J27D • Meets most tractor OEM specifi cations, as well as many

hydraulic pump and hydraulic transmission specifi cations.

Product Sizes:5L, 20L, 200L, 1,000L and Bulk

Performance Levels:• John Deere JDM J20C, J20D• New Holland ESN-M2C134-D, FNHA-2-C-200.00• Massey Ferguson M-1141, M-1135• Case MS-1209, MS-1207, MS-1210, MS-1230• Kubota, White Farm (Oliver), AGCO/Duetz-Allis/Allis-Chalmers• Volvo, Clark, ZF• Various previous specifi cations from each manufacturer above

Product Sizes:5L, 20L, 200L, 1,000L and Bulk

HYDRAULIC OILSHi-Tec Hydraulic Oils are blended from high quality mineral oils possessing a high viscosity index and low pour point. These oils give a long trouble free service life and will be chemically stable under severe operating conditions. They give excellent protection against corrosion; resist emulsifi cation, and any formation of unwanted stable foam.

Available in ISO 10, 22, 32, 46, 68, 100, 150

Performance Levels:• Vickers I-286-S, M-2950-S• AFNOR NFE 48-603 (HM)• Hagglunds-Denison HF-0, HF-1,

HF-2• AFNOR NFE 48-691 (wet)• Cincinnati Milacron P-68, P-69, P-70• SS155434• DIN 51524, Part 2

DD50 COOLANT GREENPerformance Levels:• ASTM D-3306, D-4985, D-6210• MAN 324• Caterpillar EC1• Mercedes Benz DBL 325• Cummins 14603• MTU MTL 5048• Detroit Diesel 7SE 298• New Holland WSN-M97B18-D• DaimlerChrysler MS 7170, MS 9769• PACCAR• Ford ESE-M97B44A, ESE-M97B18-C,

Ford WSS-M97B51-A1• Peterbilt 8502.002• Freightliner 48-2288D• Perkins• GM 1825M, 1899M, GM Heavy Truck

• Saab-Scania 6901• Hyundai• SAE J1034, J1941• JIS K2234• TMC RP 329• Kenworth RO26-170-97• Volvo Heavy Truck• Landrover• White Star• MACK Trucks• US Federal A-A-870-A• Kubota Extended Life Premix Coolant • Deutz 0199-99-1115/6


• ISO 6743/4 (HM)• US Steel 136, 127• SEB 181 222• Racine, variable volume vane pumps• VDMA 24318• Commercial Hydraulics


Hi-Tec DD50 Coolant Green is a superior, fully formulated Hybrid technology premix, luminescent yellow in colour.

AGRICULTURAL RANGE

AGRICULTURAL AND FARM OILS


MULTITRANS ATFHi-Tec Multitrans ATF is a premium full synthetic automatic transmission fl uid specifi cally designed for use in North American, European and Asian vehicles.

Hi-Tec Multitrans ATF has exceptional oxidative resistance, antiwear performance and frictional stability. It provides excellent antirust properties and sludge and varnish control. Its multivehicle applicability allows reduction of inventory of transmission fl uids.

ATF DX6Hi-Tec ATF Dexron® VI is a premium full synthetic automatic transmission fl uid specially formulated to meet the requirements of the General Motors Dexron® VI specifi cation.

SYN ATF DEXRON 3Hi-Tec Syn ATF DX3 is a premium full synthetic, multifunctional fl uid for automatic and powershift transmissions and industrial and mobile hydraulic systems. It is specifi cally suited for vehicle and transmissions where modern designs place increased stress on the automatic transmission fl uids.

Performance Levels:• General Motors DEXRON III (H)• Ford MERCON • Allison C4• Allison TES 389• Power steering fl uid applications• Hydraulic pump system


Performance Levels:• Ford Mercon® V, Allison C-4 and JASO 1-A• GM Dexron® IIIH, Ford Mercon and Ford / BTR 4 speed 85 and

95 LE fl uids• Hi-Tec MULTITRANS ATF will provide suitable performance in

numerous passenger cars applications including:• AE, Aisin Warner, Audi, BMW, Chrysler, Daimler, Ford Mercon,

GM Dexron, Honda, Hyundai, Jaguar, JASO, JATCO, JWS, Kia, Mazda, Mercedes Benz, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, Volvo, VW and ZF; as well as commercial applications including Allison, MAN, Voith and MB


Performance Levels:• GM DEXRON® VI• Ford MERCON® LV• Ford MERCON® SP • Toyota WS• Hi-Tec ATF Dexron® VI is also suitable for many hydraulic

systems where ISO 22 or 32 hydraulic fl uids or SAE 10W engine oils are recommended.

• Note: DO NOT use for CVT, DCT or Ford M2C-33F and M2C-33G (Type F and G) transmissions


ATF HONDA CVTHi-Tec Honda CVT Transmission Fluid is a premium full synthetic Continuously Variable Transmission (CVT) fl uid designed specifi cally for use in Honda vehicles requiring Honda specifi cation HMMF (Fluids meeting specifi cation Honda Z1 ATF are no longer recommended for Honda CVT transmissions).

Performance Levels:• Hi-Tec Honda CVT Transmission Fluid is specifi cally for use

in Honda vehicles requiring CVT transmission fl uid meeting Honda specifi cation HMMF.

• Honda CVT fl uid is not suitable for other types of CVT especially Toyota and Ford Hybrids and chain driven CVTs (e.g. VW, Audi, Subaru, Ford CVT-30).

Product Sizes:1L, 5L, 20L, 60L and 200L

MULTITRANS PLUS ATFHi-Tec Multitrans Plus ATF is a premium full synthetic automatic transmission fl uid designed to meet the long drain ZF TE-ML 14C performance standard, as well as being suitable for use in many North American, European and Asian vehicles.

Performance Levels:• ZF TE-ML 14C (suitable for use in ZF Ecomat powershift

transmissions in buses)• Ford Mercon® V, Allison C-4, JASO 1-A, MAN 339 V1, Voith

55.6335.XX (G607) and Volvo 97340 and 97341• GM Dexron® IIIH, Ford Mercon fl uids• All other specifi cations fulfi lled by Hi-Tec Multitrans ATF


FULL SYNTHETIC ATF FLUIDS

TRANSMISSION OILS

First Choice for Fluids


ATF DX3Hi-Tec ATF DX3 is an automatic transmission fl uid for use in older automatic transmissions requiring Dexron® III or Mercon performance. It is also suitable for use in other transmissions, such as Allison C4 and TES-389, and power steering, pump and hydraulic applications.

ATF TYPE 95Hi-Tec Type 95 ATF is the premium Automatic Transmission Fluid for the Ford 4 speed automatic transmissions made by BTR for the 95LE in V8 and the 85LE in 6-cylinder models.

Performance Levels:• Type A Suffi x A (TASA) • Caterpillar TO-2• Ford Mercon • GM Dexron II• Volvo 97325


Performance Levels:• General Motors DEXRON III • Allison C-4• Caterpillar TO-2• Power Steering Fluid applications• Many hydraulic systems and smaller rotary air compressors.• Note: DO NOT use for Dexron VI, Mercon V or Type F

applications.Product Sizes:1L, 5L, 20L, 60L, 200L, 1000L and Bulk

MULTI VEHICLE CVTHi-Tec Multi Vehicle CVT Transmission Fluid is a premium full synthetic Continuously Variable Transmission (CVT) fl uid designed for use in a wide variety of vehicles.

Continuously Variable Transmissions can be chain or belt driven. Chain and belt driven CVTs operate through a torque converter which requires high metal to metal friction characteristics.

ATF TYPE FHi-Tec ATF Type F is a premium Automatic Transmission Fluid for older Ford automatic transmissions.

Performance Levels:• Ford Motor Company M2C33-F• Ford Motor Company M2C33-G


Performance Levels:• Daihatsu (TC), • Mitsubishi (CVTF-J1/SP-III)• Dodge Caliber (NS-2) • Mopar CVTF+4• GM/Saturn (DEX-CVT) • Subaru (NS-2)• Hyundai / Kia (SP-III) • Suzuki (TC/NS-2)• Mercedes Benz (236.20) • Toyota (TC)• Ford CVT 23 • Nissan NS-2


FULL SYNTHETIC ATF FLUIDS

PREMIUM MINERAL ATF FLUIDS

TRANSMISSION OILS


POWER STEERING FLUIDHi-Tec Power Steering Fluid is a new generation premium power steering fl uid.

Benefi ts• Suitable for most passenger car and light commercial power

steering systems.• Effective anti-wear properties help minimise wear and

maximise system life.• Effective foam control and oxidation provides smooth operation

and longevity of fl uid.

Product Size:500mL

CAT TO-4 10, 30, 50, 60Hi-Tec CAT TO-4 is the specialised Transmission and Drive Train Oil (TDTO) which has been uniquely formulated to meet every special requirement of the Caterpillar specifi cation TO-4 (2005 revision), and as well, Allison C-4 specifi cation.

Hi-Tec CAT TO-4 greatly reduces gear wear, improves friction control, promotes long life in transmission and brakes, and ensures less brake noise and increased rimpull.

Performance Levels:• Caterpillar TO-4 (Version 2005) • Caterpillar TO-2 (obsolete)• Komatsu KES 07.868.1 powertrain fl uid• Komatsu Dresser• Dana Powershift: SAE10W and SAE30• Allison C-4 and Allison C-3 (obsolete): SAE 10W and SAE30• API: GL-3• API: GL-4 Gear Wear Protection Capability• API: CF & CF-2 (SAE 30, 40, and 50 - In case of

misapplication as an Engine Oil)• ZF TE-ML03C (converter transmissions for off-road

equipment): SAE10W and SAE30• ZF TE-01 (List Obsolete): SAE30 and SAE50• Eaton: SAE50• Vickers 35 VQ25: SAE10 • Tremec/TTC: SAE50 • Spicer Clark-Hurth: SAE 10W and SAE30


PREMIUM MINERAL ATF FLUIDS

TRANSMISSION OILS

First Choice for Fluids


SYNTHETIC GEAR OILS

SYNSHIFT 75W/140 GL-5Hi-Tec Synshift 75W/140 is a full synthetic gear/limited slip oil which offers outstanding high temperature and high load carrying performance properties combined with excellent low temperature fl uidity and cold fl ow properties, excellent corrosion protection and superior seal compatibility.

GEAR OIL 75W/90 GL-4Hi-Tec Gear Oil GL-4 75W/90 is an API GL-4 gear lubricant specially recommended for synchronised manual transmissions, front wheel drive transaxle gear boxes, automotive hypoid and spiral bevel axles operating at low to moderate loads.

SYN ROAD RANGER 50Hi-Tec Synthetic Roadranger SAE 50 is made from premium polyalphaolefi n and ester full synthetic base oils for use in Roadranger gearboxes and automotive and industrial applications, where extreme pressure properties are not required. The extremely high viscosity index and very low pour point provide a tough, highly adhesive fi lm to give superior protection against wear to gear-teeth and bearings.

Performance Levels:• API: GL1


SYNGEAR 75W/90 GL-5Hi-Tec Syngear 75W/90 is a full synthetic limited slip gear oil which offers outstanding high temperature and high load performance properties combined with excellent low temperature fl uidity and cold fl ow properties, excellent corrosion protection and superior seal compatibility.

EXTREME SEMI-SYN GEAR OIL75W/90 GL-5Hi-Tec Extreme Semi-Syn Gear Oil GL5 75W90 is a superior, new generation gear oil for the lubrication of car, truck and tractor differentials and other fi nal drives along with transfer and steering gearboxes and manual transmissions.

Performance Levels:• Automotive: API GL-5, MT-1; MACK GO-J • Hi-Tec Syngear 75W/90 is suitable for use where the

following specifi cations are called for: • US Military: MIL-L-2105C, MIL-L-2105D, MIL-PRF-

2105E; SAE J2360Product Sizes:1L, 4L, 20L, 60L, 200L, 1000L and Bulk

Performance Levels:• Hi-Tec Extreme Semi-Syn Gear Oil GL5 75W90 surpasses

the API service classifi cation and meet the performance requirements of the U.S. Military specifi cation MIL-L-2105D.

• Hi-Tec Extreme Semi-Syn Gear Oil GL5 75W90 is recommended for initial and service fi ll and top-up of car, truck and tractor manual transmissions, differentials, fi nal drives and transfer and steering gearboxes.


Performance Levels:• Automotive: API GL-5, MT-1; MACK GO-J Hi-Tec SYNGEAR SAE 75W/140 is suitable for use where

the following specifi cations are called for: • US Military: MIL-L-2105C, MIL-L-2105D, MIL-PRF-2105E;

SAE J2360Product Sizes:4L, 20L, 60L, 200L, 1000L and Bulk

Performance Levels:• API: GL-4

• Hi-Tec Gear Oil GL-4 75W90 is suitable for service fi ll of GMH, Ford, Daihatsu, Mazda, Mitsubishi, Nissan, Toyota and all other transmissions requiring an API GL-4 (SAE 75W/90) gear lubricant.


PREMIUM GEAR OILS

AUTOMOTIVE GEAR OILS


GEAR OIL 85W/140 GL-5Hi-Tec Gear Oil GL-5 85W140 is superior GL-5 gear oils designed to provide Excellent Thermal Stability, Much Improved Oil Seal Life and Gear Surface Life, and Much Improved Corrosion Protection to Yellow Metals. Hi-Tec Gear Oil GL-5 85W140 is specifi ed for the lubrication of car, truck and tractor differentials and other fi nal drives, transfer and steering gearboxes and manual transmissions. Special oxidation resistant paraffi nic base oils combined with high performance extreme pressure (EP) additives are formulated to ensure long service life to transmission drive lines.

Hi-Tec Gear Oil GL-5 85W140 is recommended for heavier duty applications which call for 85W140 thickness, such as initial and service fi ll and top-up of truck differentials, fi nal drives and some transfer and steering gearboxes.

Performance Levels:• Viscosity: 85W140• Automotive: API GL5• Military specifi cation: MIL-L-2105D.

Product Sizes:1L, 4L 20L, 60L, 200L, 1000L and Bulk

EP MULTIGEAR OILS 80W90 & 85W140 GL-5Hi-Tec EP Multigear Oils are superior new generation XRMR (Extra Range Multigear) gear oils designed to provide improved:• Thermal stability - XHTR (Extra High Temperature) • Oil seal life • Durability (gear surface life) • Corrosion protection to yellow metals under both wet and dry conditions.

Hi-Tec EP Multigear Oils are suitable for the lubrication of car, truck and tractor differentials, fi nal drives, transfer and steering gearboxes and manual transmissions, under both heavy and light service conditions.

LS GEAR OILS 90 & 85W140 GL-5Hi-Tec LS Gear Oils SAE 90 and SAE 85W/140 are superior gear oils with special limited slip properties to enhance differential performance.

Hi-Tec LS Gear Oils SAE 90 and SAE 85W/140 are specifi cally designed to provide very much improved:

• Oil seal life• Durability (Gear surface life)• Corrosion protection to yellow metals under both wet and dry conditions• Limited slip differential performance

GEAR OIL 80W/90 GL-5Hi-Tec Gear Oil GL-5 80W90 is a superior GL-5 gear oil designed to provide excellent thermal stability, much improved oil seal life and gear surface life, and much improved corrosion protection to yellow metals. Hi-Tec Gear Oil GL-5 80W90 is specifi c to the lubrication of car, truck and tractor differentials and other fi nal drives, transfer and steering gearboxes and manual transmissions. Hi-Tec Gear Oil GL-5 80W90 is recommended for initial and service fi ll and top-up of car, truck and tractor manual transmissions, differentials, fi nal drives and transfer and steering gearboxes.

Performance Levels:• API GL5• API MT-1 • SAE J2360• MIL-L-2105D • MIL-PRF-2105E• Mack GO-J


Performance Levels:• API service GL5• US Military specifi cations MIL-L-2105DProduct Sizes:1L, 4L, 20L, 60L, 200L, 1000L and Bulk

Performance Levels:• Viscosity: 80W90• Automotive: API GL5• Military specifi cation: MIL-L-2105D.

Product Sizes:1L, 4L 20L, 60L, 200L, 1000L and Bulk

PREMIUM GEAR OILS

EXTREME SEMI-SYN GEAR OIL 85W/140 GL-5Hi-Tec Extreme Semi-Syn Gear Oil GL5 85W140 is a superior new generation XRMR (Extra Range Multigear) semi-synthetic gear oil designed to provide very much improved:• Thermal stability-XHTR (Extra High Temp.)• Oil seal life • Durability (gear surface life) • Corrosion protection to yellow metals under both wet and dry conditions.

Performance Levels:• API GL5 • MIL-L-2105D• API MT-1 • MIL-PRF-2105E • SAE J2360 • Mack GO-J





GEAR OILS

RX80 GEAR OILHi-Tec RX80 Gear Oil is a manual transmission fl uid of advanced design especially developed to provide easier gear changes over a wide temperature range.

Hi-Tec RX80 Gear Oil is particularly versatile in cold weather. It reduces shift effort at start-up, as well as controlling transmission noise and idle rattle at operating temperatures.

ROAD RANGER 50Hi-Tec Road Ranger SAE 50 is mineral based blended oil for use in Road Ranger gearboxes and for automotive and industrial applications where extreme pressure properties are not required. The high viscosity index and low pour point provide a tough, highly adhesive fi lm to protect gear teeth and bearings against wear.

GEAR OIL 75W/85 GL-4Hi-Tec Gear Oil GL-4 75W85 is an API GL-4 gear lubricant is specially recommended for manual transmissions and transaxles, automotive axles with hypoid gears operating under low to moderate loads, and spiral bevel gears operating at moderate to severe loads.

Performance Levels:• SAE 80W viscosity• API GL-4 performance level.


Performance Levels:• API GL-1, GL-2


Performance Levels:• API GL-4


17

Hi-Tec Gear Oils are superior new generation lubricants offering outstanding high temperature and high load performance properties combined with excellent fl uidity and fl ow properties for transmission drive lines.


hi-tecoils.com.au

HYDRAULIC OILSHi-Tec Hydraulic Oils are blended from high quality mineral oils possessing good fl uid characteristics. These oils give a long trouble free service life and will be chemically stable under severe operating conditions. They give excellent protection against corrosion; resist emulsifi cation, and any formation of unwanted stable foam.

Available in ISO 10, 22, 32, 46, 68, 100, 150

HYDRAULIC OILS

HVI HYDRAULIC OILSHi-Tec HVI Hydraulic Fluids are premium hydraulic fl uids with high viscosity index which have been formulated to handle wider range of operating temperatures, which are associated with high horsepower hydraulic systems. These oils provide unique, long life operating service characteristics with proven rust, oxidation, corrosion and foam inhibitors.

Available in ISO 32, 46, 68, 100

XHVI HYDRAULIC OILSHi-Tec XHVI Hydraulic Fluids are top of the range hydraulic fl uids which have been formulated to handle extreme range of operating temperatures, pressures, power densities and fl uid fl ow rates which are associated with higher horsepower hydraulic systems. The combination of anti-wear, detergent and viscosity-improving additives with proven rust, oxidation, corrosion and foam inhibitors provides unique, longest life operating service.


ZF HYDRAULIC OILSHi-Tec ZF Hydraulic Oil is a Zinc Free, Ashless, Anti-Wear lubricant blended from high quality mineral oils possessing a high viscosity index and low pour point. This lubricant will give a long trouble free service life and will be chemically stable under severe operating conditions.

Available in ISO 22, 32, 46, 68, 100

18

Performance Levels:• Vickers I-286-S, M-2950-S• AFNOR NFE 48-603 (HM)• Hagglunds-Denison HF-0, HF-1,

HF-2• AFNOR NFE 48-691 (wet)• Cincinnati Milacron P-68, P-69, P-70• SS155434• DIN 51524, Part 2

Performance Levels:• Vickers I-286-S• M-2950S• Denison HF-1, HF-2, HF-0• Cincinnati Milacron P-68, P-69, P7-0• DIN 51524, Part 2 and 3

Performance Levels:• Vickers I-286-S, M-2950S• VDMA 24318;• Denison HF-1, HF-2, HF-0• SS 155434;• Cincinnati Milacron P-68, P-69, P70• ISO 6743/4 (HM, HV);• DIN 51524, Part 2 and 3• US Steel 127, 136;

Performance Levels:• DIN 51524, parts 1, 2 and 3 (HL, HLP,

HVLP)• Cincinnati Machine P-68, P-69, P-70• SEB 181 222• Denison HF-0, HF-1, HF-2• VDMA 24318• Parker Hannifi n France HF-0• ISO 6743/4 (HM, HV)

• ISO 6743/4 (HM)• US Steel 136, 127• SEB 181 222• Racine, variable volume vane pumps• VDMA 24318• Commercial Hydraulics

Product Sizes:20L, 200L, 1000L and Bulk(HYD 68 - 5L and 10L also)

• US Steel 127, 136• AFNOR N FE 48-691 (wet)• ASTM-D2619 HF-0• and other commercial hydraulics.


• SEB 181 222• AFNOR N FE 48-691 (wet); • AFNOR NFE 48 603 (HM, HV)• ASTM-D2619 HF-0; and • Other commercial hydraulics.


• AFNOR NFE 48-603 (HM, HV)• US Steel 126, 127 and 136• Sperry Vickers I-286-S, M-2950-S• SIS SS 155434• DIN 51506 (VBL, VCL, VDL)• ISO/DP 6521 (DAA, DAB, DAH, DAG)


INDUSTRIAL OILS



SYNTHETIC COMPRESSOR OILS 32-150Hi-Tec Synthetic Compressor Oils are synthetic, zinc free, ashless, anti-wear oils blended from a complex mixture of PAO base stocks and esters possessing a very high viscosity index and low pour point. These oils give a long trouble free service life and will be chemically stable under severe operating conditions. They give excellent protection against corrosion; resist emulsifi cation and any formation of unwanted stable foam.

Available in ISO 32, 46, 68, 100, 150

COMPRESSOR OILS 32-150Hi-Tec Compressor Oils, which are available in most ISO viscosity grades, are premium upmarket lubricants recommended for rotary vane and screw air compressors. They are also suitable for reciprocating air compressors requiring this viscosity grade.

Available in ISO 32, 46, 68, 100, 150

SEMI SYNTHETIC COMPRESSOR OIL 68Hi-Tec Semi Synthetic Compressor Oil 68 is a semi synthetic, zinc free, ashless, anti-wear oil blended from severely refi ned Group III base oil & a complex mixture of synthetic PAO oils possessing a very high viscosity index and low pour point.This oil gives a long trouble free service life and will be chemically stable under severe operating conditions.It gives excellent protection against corrosion; resists emulsifi cation and any formation of unwanted stable foam.

Performance Levels:• Hi-Tec Synthetic Compressor Oils meet or exceed

the requirements of many international tests and specifi cations for industrial and mobile hydraulic and compressor systems including the following:• DIN 51506 (VBL, VCL, VDL)• ISO/DP 6521 (DAA, DAB, DAH, DAG) as well as many

hydraulic oil specifi cations.


Performance Levels:• Hi-Tec Compressor Oils meet or exceed

the requirements of many international tests and specifi cations for industrial and mobile hydraulic and compressor systems including the following:• DIN 51506 (VBL, VCL, VDL)• ISO/DP 6521 (DAA, DAB, DAH, DAG)

as well as many hydraulic oil specifi cations.


COMPRESSOR OILS

Performance Levels:• Hi-Tec Semi Synthetic Compressor Oils meet or exceed

the requirements of many international tests and specifi cations for industrial and mobile hydraulic and compressor systems including the following:• DIN 51506 (VBL, VCL, VDL)• ISO/DP 6521 (DAA, DAB, DAH, DAG) as well as many hydraulic oil specifi cations.


19

FIND THE RIGHT OIL FOR YOUR VEHICLE OR MACHINE

INDUSTRIAL OILS


BIO-DEGRADABLE, FOOD GRADEAND FIRE RESISTANT OILSV-TYPE HYDRAULIC FLUIDSHi-Tec Bio-Hydraulic Oils is a biodegradable ISO Oils grade hydraulic lubricant containing vegetable oil based esters and a high performance additives Productage. It is designed to meet the requirements of ISO 15380:2002, is classifi ed under ISO 6743-4 as Type HETG and is biodegradable according to OECD 301B.

Available in ISO 32, 46, 68

V-TYPE CHAIN BARHi-Tec Chain Bar V-Type 100, 150 and 220 are biodegradable chain and bar lubricants containing vegetable oil based esters, performance additives and a special anti-fl ing additive to help the oil adhere to the chain. They are intrinsically biodegradable according to OECD 301B.


S-TYPE HYDRAULIC FLUIDSHi-Tec Bio-Hydraulic Syn Oils are biodegradable hydraulic lubricants containing synthetic fatty ester, stabilizers, anti-wear additives, corrosion inhibitors and foam inhibitors. They are biodegradable according to OECD 301B.


FOOD GRADE HYDRAULIC FLUIDSHi-Tec FG Hydraulic Fluids are food grade lubricants recommended for use in hydraulic systems in food processing plants where incidental food contact can occur. They are also recommended for use in bearings, chains and valves in canning and bottling machinery.


Performance Levels:• Operating temperature of -10ºC to 65ºC• Safer for users and the environment• More easily biodegradable• Lower in toxicity – free from heavy metals• Enhanced in performance characteristics • Less changeable in viscosity as operating temperatures

increase due to higher viscosity index• Higher in lubricity resulting in lower equipment operating

temperatures.


Typical Applications:• Hi-Tec Chain Bar Oil can be used in air driven down

hole hammers and are particularly suited to use in environmentally sensitive areas such as: National or State parks Near or on waterways; Recreational areas; Road, rail and tramways; Local Government Maintenance Vehicles; Water, Electricity, Telecommunication and Gas Service providers etc.


Performance Levels:• Operating temperature of -10ºC to 100ºC• Safer for users and the environment• More easily biodegradable• Lower in toxicity – free from heavy metals• Enhanced in performance characteristics • Less changeable in viscosity as operating temperatures

increase due to higher viscosity index• Higher in lubricity resulting in lower equipment operating

temperatures.


Performance Levels:• Made from Synthetic Poly Alpha Olefi ns• Will provide a far longer service life than most mineral based

lubricants.• Extended equipment life• Compatible with mineral oils and most synthetic oils• High viscosity index for improved system performance• Meet all requirements of FDA Regulation 21 CFR 178.3750


INDUSTRIAL OILS



BIO-DEGRADABLE, FOOD GRADEAND FIRE RESISTANT OILSFOOD GRADE COMPRESSOR FLUIDSHi-Tec FG Compressor Fluids are synthetic hydrocarbon based food grade lubricants recommended for use in compressors systems in food processing plants where incidental food contact can occur. They are especially recommended for rotary compressors where incidental food contact may occur with oil in the discharge air.

FOOD GRADE MACHINE OILSHi-Tec Food Grade Machine Oils are made from synthetic hydrocarbons (Poly Alpha Olefi ns) and special additive packages which allow it to meet the approval requirements of the NSF H1 grade where incidental food contact can occur.

FIRE RESISTANT HYDRAULIC FLUID QA720Hi-Tec Fire Resistant Hydraulic Fluid QA720 is a non-hazardous fi re resistant water glycol (HFC) fl uid. It is recommended for use in systems that require a fl uid to be:• Environmentally acceptable• Fire Resistant• Functional over a wide temperature range

FIRE RESISTANT HYDRAULIC FLUID Q888-46 & 68Hi-Tec Fire Resistant Hydraulic Fluid Q888-46 & 68 is designed to replace antiwear, mineral oil-based hydraulic fl uids used in applications where fi re hazards exist. It can also be used in environmentally sensitive hydraulic applications without compromising the overall hydraulic system operations.

Performance Levels:• Longer life with fewer oil changes, up to 8000 hours.• Compatible with mineral oils and most synthetic oils• Reduced compressor maintenance• Lower oil consumption and energy costs• Excellent antiwear properties result in extended equipment life• Rust and oxidation-inhibition result in extended equipment life• Long fl uid life without gumming or discolouring• Meet all requirements of FDA Regulation 21 CFR 178.3750


Performance Levels:• Hi-Tec Food Grade Gear Oils will provide a far longer service

life than most mineral based lubricants.• Longer life with fewer oil changes, • Extended equipment life• Reduced energy costs• Excellent high and low temperature operations• Increased oxidative stability


Performance Levels:• Safety - Outstanding fi re resistance• Non-hazardous fl uid• Good lubrication - Low wear rate• High viscosity index• Long life - Excellent thermal and oxidation stability• Excellent hydrolytic stability


Performance Levels:• Fire-resistant• High ignition temperature and low heat release• Properties that limit the spread of fi re• Excellent shear stability• Approved by Factory Mutual Approvals• Non-toxic / non-toxic to aquatic life• Non-irritating• Fully biodegradable• Simple waste treatment


INDUSTRIAL OILS


INDUSTRIAL GEAR OILS

ROCK DRILL AND CHAIN BAR OILS

Characteristics:• Contain tackifi ers to resist “throw-off”• Suitable for both manual application or for units fi tted with

automatic oilers. Excellent penetration of chain links.


Performance Levels:• Hi-Tec Synmach Synthetic Machine Oils meet and exceed

many international equipment manufacturers’ specifi cations including:• US Steel 224• AGMA 250.04• AGMA 251.02• AGMA 9005—D94• AGMA 9005—E02• DIN 51517 Part 3• ISO 12925-1 CKC/CKD


Performance Levels:• Hi-Tec Machine Oils meet many international equipment

manufacturers’ specifi cations including:• US Steel 224• AGMA 250.04• AGMA 251.02• AGMA 9005—D94

• AGMA 9005—E02 • DIN 51517 Part 3 • ISO 12925-1 CKC/CKD


SYNTHETIC MACHINE OILS 220-460Hi-Tec Synmach Synthetic Machine Oils are superior, full synthetic industrial extreme-pressure gear and bearing lubricants. They can be used where high loads and/or high temperatures are encountered and where water contamination cannot be avoided.Hi-Tec Synmach Synthetic Machine Oilsprovide superior anti-friction characteristics in bearings, steel gear transmissions and steel/phosphor bronze gear units.


CHAIN BAR OIL 100-220Hi-Tec Chain Bar Oils are made from a blend of high quality base stocks and selected additives to ensure optimum performance and long life lubrication of chains and their sprockets.


MACHINE OILS 68-680Hi-Tec Machine Oils are premium industrial extreme pressure gear and bearing oils especially suitable where high loads and/or high temperatures are encountered and where water contaminating infl uences cannot be avoided. Hi-Tec Machine Oils have excellent anti-friction characteristics for use in bearings, steel gear transmissions and steel phosphobronze gear units.

Available in ISO 68, 100, 150, 220, 320, 460, 680

ROCK DRILL OIL 100-460Hi-Tec Rock Drill Oils provide effective lubrication and long trouble free service life to air operated equipment such as pneumatic drills, jumbo drills, jackleg drills, jackhammers, small air tools and motors, and airline oilers.


Characteristics:• Extreme Pressure And Anti-Wear Additives• Rust And Oxidation Inhibitors Used• Neglible Odour & Toxicity• Extra Adhesiveness• Dieseling Inhibited• Anti-Foaming Characteristicse


INDUSTRIAL OILS



MULTIFUNCTIONAL FLUIDS

SLIDEWAY OIL 32-220Hi-Tec Slideway Oils are an upmarket lubricant recommended for slideways of machine tools, planers, lathes or guides of other types of machines where a tacky lubricant is required.


SLIDEWAY OILS

Characteristics:• Highest quality paraffi nic base oils• Non-corrosive EP additives• Optimum level of tackiness for precision and smooth movements• Protection against rust, oxidation and foam development


HEAT TRANSFER OILS 12-90Hi-Tec Heat Transfer Oils are high performance fl uids intended for use in closed indirect heating installations. They are formulated from highly refi ned base stocks that are resistant to thermal cracking and chemical oxidation.

Available in ISO 12, 21, 25, 32, 68, 90

PREMIUM TURBINE OILS 32-320Hi-Tec Premium Turbine Oils are multifunctional rust and oxidation inhibited (R&O) turbine oils suitable for use where high demands are placed on the lubricant.

Available in ISO 32, 46, 68, 100, 150, 320

Applications:• Hi-Tec Heat Transfer Oils can be used in open installations where

fuming of the oil could be a problem. Specifi c application ranges and advice are (temperature range for bulk fl uids):

Closed systems: up to 300ºC Open systems: up to 160ºC Product Sizes:20L, 200L, 1000L and Bulk

Specifi cations:• Hi-Tec Premium Turbine Oils meet or exceed the requirements of many

international tests and specifi cations for R & O turbine and hydraulic systems including: �

• Cincinnati-Machine P-38 (HL 32), P-55 (HL 46), P-54 (HL 68), P-57 (HL 150)� DIN 51524 Part 1 (HL)• DIN 51506 (VBL, VCL, VDL)• DIN 51517 Part 2 (CL)• DIN 51515, Part 1 (L-TD), Part 2 (L-TG)• ISO/DP 6521 (DAA, DAB, DAH, DAG)


INDUSTRIAL OILS

FREECALL: 1300 796 009 | E: [email protected] | F: (02) 9604 1611hi-tecoils.com.au 24

QUINLUBE #19Hi-Tec Quinlube #19 can be used for medium to heavy duty machining and grinding operations requiring maximum cleanliness, cooling and corrosion protection. It is well suited for use on carbon steel, cast iron and other ferrous alloys.

Characteristics:• Readily bio-degradable as per ISO 7827: 1994 (AS4351.2 – 1996).• Contains no phenols, polychlorinated biphenyls, mercurials, nitrites,

phosphates or borates.• Multi-phase organic corrosion inhibitor system provides outstanding

corrosion protection, even under high humidity “wet stacking” conditions.

• Highly polar, synthetic lubricating ingredients which reduce wheel and/or tool wear and produce good fi nish characteristics.

• Maintains high bio-resistance. Greatly reduces odours and fungal/bacterial sludges.

• Contains no inorganic salts of any type. Deposits a light, fl uid, residual fi lm with good lubrication properties.

• Provides very good cleanliness, which keeps grinding wheels open and freecutting.

• Maintains clean machine surfaces.• Provides excellent wetting and heat transfer properties.• Low foaming.• Stable micro-emulsions formed over a wide range of water hardness.

Product Sizes:20L and 200L

Characteristics:• Suitable for Ferrous materials with a machinability of >50% (Medium

machinability) and for Non Ferrous materials• Maximised Lubrication and Cooling is assured between the cutting

tool and work surfaces• Promotes long tool life and excellent surface fi nish to the machined

surfaces• Rust protection with emulsion dilutions up to 60:1 water to oil

concentrations• Bacterial resistance ensures long emulsion service life and prevents

staining and corrosion• Long tool life is aided by the high oiliness• Provides excellent emulsion stability in hard water up to 400ppm

calcium carbonate.


Characteristics:• Suitable for use in waters up to 300ppm CaCO3 hardness• Provides stable lubrication for high quality surface fi nish.• Excellent corrosion protection for machined parts, DIN chip <3%.• Leaves no sticky residues on the workpiece.• Biostatic.• Triazine free.• Contains no Phosphorous, Sulphur or Chlorine.• Low environmental impact, meets WGK class 1.• Compatible with most seal, hose and Producting polymers designed

for use with petroleum based lubricants.• Compatible with all metals commonly found in metalworking coolant

systems and machines.


BIOCUT Q3755Hi-Tec Soluble Cutting Fluid is premium quality Chlorine Free, borate-containing soluble cutting oil.

It is designed for light to moderate machining operations including boring, milling, drilling, tapping, threading, broaching, turning, reaming and grinding.

SOLUBLE CUTTING FLUIDHi-Tec Soluble Cutting Fluid is premium quality Chlorine Free, borate-containing soluble cutting oil.It is designed for light to moderate machining operations including boring, milling, drilling, tapping, threading, broaching, turning, reaming and grinding.

CUTTING OILS

INDUSTRIAL OILS



SOLCUT QLB2Hi-Tec Solcut QLB2 is a semi-synthetic biostable machining and grinding fl uid forming transparent emulsions, which may become semi-translucent in hard water. Hi-Tec Solcut QLB2 combines the cleanliness and detergency of synthetic products without the sticky residues often encountered with such products.

Characteristics:• Wide range of applications, from brass and aluminium

machining in large transfer systems to machining steel in small single sump machines

• Emulsions are non-staining to aluminium• Excellent ferrous corrosion protection• Offers increased cleanliness and longer sump life.• Under normal conditions, 90% of any tramp oil will fl oat

out over a week-end shutdown, further extending the sump life of the emulsion.

• Emulsions can readily be split with conventional effl uent treatment techniques, thus minimizing disposal costs.


CUTTING OILS

Characteristics:• Excellent corrosion protection• The bland nature of the odour is acceptable to

operators versus the standard sulphurised-type odours of other cutting oils

• High fi lm strength and excellent lubricating qualities• A thin fi lm, oily residue, is non-tacky and easily

removed by conventional alkaline or emulsion cleaners.

• Optimum performance on diffi cult machining operations and grinding operations.

• The non-sulphurised and non-chlorinated nature of this product does not require special handling from a waste treatment or disposal viewpoint.


NEAT CUTTING OILQKUT170 NSCHi-Tec Neat Cutting Oil QKUT170 NSC is designed for medium to heavy-duty machining, grinding and threading operations requiring a high degree of lubrication. It is suitable for use on all grades of steel, especially diffi cult to machine high nickel alloys and copper.

INDUSTRIAL OILS


LONG LIFE COOLANT GREENHi-Tec Long Life Coolant (Green) is a unique blend of organic long life corrosion inhibitors and ethylene glycol designed to provide superior corrosion protection and anti-freeze/anti-boil protection for all types of petrol, diesel and gas engines in light commercial and passenger vehicles, heavy duty commercial, industrial, on highway, marine, mining and stationary applications.

LONG LIFE COOLANT REDHi-Tec Long Life Coolant Red is an ethylene glycol based antifreeze/coolant concentrate incorporating an advanced formula technology with virtually non-depleting organic acid corrosion inhibitors. The product is dyed a distinctive orange colour for ease of identifi cation.

HD COOLANT CONCENTRATEHi-Tec Heavy Duty Diesel Engine Coolant Concentrate (Green) is a luminescent yellow, superior fully formulated Hybrid technology engine coolant. This Hybrid technology coolant has the advantage of being more robust than both conventional and organic acid technology (OAT) engine coolants.

CONCENTRATE COOLANTS

Characteristics:• Colour: Green• pH 33% solution: 8.3 – 9 max• Density, g/ml 20°C: 1.10 min.• Reserve Alkalinity, ml (Ph 5.5): 4• Ethylene Glycol Content wt%: 94 min.• Boiling Point: 170°C min.• Freezing Point @ 50%: < - 37ºC


Characteristics:• Colour: Red-orange• Ethylene Glycol content, wt %, typical: 93.0• Boiling Point 172 ºC min• Freezing Point @ 50%: < - 37ºC• Contains no nitrates, nitrites, borates,

phosphates or amines


Characteristics:• Low silicate• Phosphate and amine free• OEM approved• Hard water compatible• No initial SCA requirement at initial fi ll• Universal use, fully meets or exceeds standard industry

requirements for automotive, light duty, and heavy duty diesel applications

• Extended life 6 years, 12,000 hours or 1,000,000 km whichever comes fi rst


• Ethylene Glycol Content wt%: 94 min.

LASTS

5 YEARS or

250,000kms

• Ethylene Glycol content, wt %, typical: 93.0

• Contains no nitrates, nitrites, borates, LASTS

5 YEARS or

250,000kms

RADIATOR TREATMENTHi-Tec Oils Radiator Treatment is a general purpose automotive cooling system corrosion inhibitor concentrate. It is suitable for passenger cars and light commercial vehicles. It contains a mixture of highly effi cient corrosion and rust inhibitors developed for the newest generation of modern vehicles.

Characteristics:• Dilution rate is 40-50ml per litre of distilled water• 24 month/40,000 kilometre intervals• Long-life corrosion protection for aluminium and ferrous alloys• Fully compatible with the rubber hoses and plastics used in

engine cooling systems• Exceeds AS/NZ 2108.1:1997 Type B.



First Choice for Coolants & Brake Fluids


PG XL-50 COOLANTHi-Tec PG XL-50 Coolant is a blue coloured, superior, fully formulated Hybrid technology propylene glycol based engine coolant. This Hybrid technology coolant has the advantage of being more robust than both conventional and organic acid technology (OAT) engine coolants.

DD50 COOLANT REDHi-Tec DD50 Coolant Red is an ethylene glycol based antifreeze/coolant premix incorporating an advanced formula technology with virtually non-depleting organic acid corrosion inhibitors. The product is dyed a distinctive orange colour for ready identifi cation.

PREMIXED COOLANTS

Performance Levels:• ASTM D3306 (and D4656• Audi/SEAT/Skoda• BMW N600 69.0• Caterpillar EC-1• Cummins 90 T8-4• Daihatsu• Detroit Diesel/Perkins• Ford WSS-M97B44-C• ISUZU• NATO S-757• JASO M325 (Japan) LLC

• AS/NZS 2108.1:1997 (Australian Standard) Type A

• Mitsubishi ES-X64216• Honda• Hyundai• Mazda MES 121C• Mercedes-Benz Sheet 325.3• Toyota TS K2601 G• SAAB• Subaru• Volkswagen VW TL774D• VOLVO


Performance Levels:• Up to 4 years or 6000 hours or 500,000 km • No initial SCA requirement at initial fi ll• Product is compatible with standard SCAs and coolant extenders• Low silicate, free from phosphate and amine• Hard water compatible• Universal use, recommended for use in all vehicle types• Recommended for use in following applications: ASTM D-6257, D-6211

TMC RP 330, Caterpillar, Cummins, Detroit Diesel, Ford Heavy Truck, Freightliner, GM Heavy Truck, Mercedes Benz, Kenworth, MAN, Landrover, Volvo, MACK


DD50 COOLANT GREENHi-Tec DD50 Coolant Green is a superior, fully formulated Hybrid technology premix, luminescent yellow in colour.

Performance Levels:• ASTM D-3306, D-4985, D-6210• MAN 324• Caterpillar EC1• New Holland WSN-M97B18-D• DaimlerChrysler MS 7170, MS 9769• Peterbilt 8502.002• Freightliner 48-2288D• Perkins• SAE J1034, J1941• Kenworth RO26-170-97• Volvo Heavy Truck• US Federal A-A-870-A


DD50 COOLANT BLUEHi-Tec DD50 Coolant Blue is a premixed, ready-to-use blend of ethylene glycol, organic long life and inorganic corrosion inhibitors. It is designed to provide superior corrosion protection and anti-freeze/anti-boil protection for all types of petrol, diesel and gas engines, heavy duty commercial, industrial, on highway, marine, mining and stationary applications.

Performance Levels:• ASTM: D1384, D1881, D2809, D2570, D1287, D1121, D3634, D4340• AS2108 - 2004 (Type A)




RADIATOR FLUSHHi-Tec Radiator Flush is formulated to effectively clean vehicles’ radiator cooling system. It is both easy to use and when used as directed will promote cooling system effi ciency.

PREMIXED COOLANTS

Characteristics:• This product is to be used neat• Flush the system with fresh water prior to using this product• Run engine with Hi-Tec radiator fl ush for at least one day for

best results.


BRAKE FLUID DOT 3Hi-Tec Brake Fluid DOT 3 is an undyed premium quality brake fl uid that meets and exceeds all the requirements of the DOT 3 specifi cation. It is suitable for use in hydraulic brake and clutch systems.

BRAKE FLUID DOT 4Hi-Tec Brake Fluid DOT 4 is a blue premium quality, high boiling point Brake Fluid that meets and exceeds all the requirements of the DOT 4 specifi cation. For help in identifi cation it is dyed blue in colour.

Performance Levels:• High heat stability• Protects metal brake system parts from corrosion both

ferrous and non ferrous• Gently swells rubber seals to enhance sealing & prevent

system leaks• Lubricates moving parts to prolong service life• Equilibrium Refl ux Boiling Point is greater than 230ºC• Wet Equilibrium Refl ux Boiling Point is 145ºC


Performance Levels:• High heat stability• Protects metal brake system parts from corrosion both

ferrous and non ferrous• Gently swells rubber seals to enhance sealing & prevent

system leaks• Lubricates moving parts to prolong service life• Equilibrium Refl ux Boiling Point is greater than 260ºC• Wet Equilibrium Refl ux Boiling Point is 167ºC


ORGANIC PREMIX 50 COOLANTHi-Tec Organic Premix 50 Coolant is an all-organic blend of long life corrosion inhibitors and ethylene glycol designed to provide superior corrosion and anti-freeze/anti-boil protection for all types of petrol, diesel and gas engines in passenger vehicles, light trucks, heavy duty commercial, industrial, on highway, marine, mining and stationary applications.

Characteristics:• All major engine manufacturers for passenger, truck and

machinery applications.• ASTM’s D1121, D 1287, D1384, D1881 D2570, D2809, D3634,

D4340• AS 2108 - 2004 (Type A) and most international performance

specifi cations.


COMPLETE FILLHi-Tec Complete Fill Coolant is a general purpose ready to use automotive cooling system corrosion inhibitor. It is suitable for passenger cars and light commercial vehicles. It contains a mixture of highly effi cient corrosion and rust inhibitors developed for the newest generation of modern vehicles.

Characteristics:• Long-life corrosion protection for aluminium and ferrous alloys• Exceeds AS/NZ 2108.1:1997 Type B• Require no dilution• 24 month or 40,000 kilometre intervals• Direction for use: Drain the cooling system when engine is

cool. Thoroughly fl ush and rinse the cooling system. Fill the cooling system with the correct volume after reconnecting all hoses, drain plugs, etc.

Product Sizes:5L


First Choice for Coolants & Brake Fluids


CLEANING DETERGENTS

FLEETWASHHi-Tec Fleetwash is a coconut oil based detergent formulation containing inorganic phosphates for the purpose of removing dirt, mud, oil fi lm and road grime from all washable surfaces.

Hi-Tec Fleetwash can be used for all road, commercial and recreational vehicles, engines, and under bodies. It can beused on magnesium and alloy wheels, tyres and rubber inserts.

WATER BASED DEGREASERHi-Tec Water Based (WB) Degreaser is a non hazardous, biodegradable, alkaline cleaner that can be used in a wide variety of industrial and commercial applications.

Hi-Tec Water Based (WB) Degreaser is formulated to provide a powerful emulsifying action to remove dirt, greases and oils from a range of surfaces.

SUPER SCRUBA HAND CLEANERHi-Tec Super Scruba Hand Cleaner is a yellow coloured naturally formulated citrus-based waterless hand cleaner containing grit. It removes grease, oil, industrial grime and dirt.

ULTRA MAGICHi-Tec Ultra Magic is a concentrated multipurpose cleaner with no phosphates added.

Hi-Tec Ultra Magic is a concentrated detergent which effectively removes dirt, oil and grime from all washable surfaces. It is non-toxic and contains no solvents or caustic. It is non-irritating to skin and is completely safe to use on all washable surfaces.

ARMOR KOTEHi-Tec Armor Kote when applied to vinyl and rubber surfaces will produce a gloss leaving the surface looking as new. Hi-Tec Armor Kote is safe to use on all surfaces such as bumpers, cover strips etc.

Characteristics:• Manual Washing: Dilute with up to 10 parts of water• Low Pressure Spraying: Dilute with up to 10 parts of water• High Pressure Spraying: Dilute with up to 15 parts of water• Biodegradable cleaning agent• Water soluble and non-fl ammable• pH in solution of 7.0 - 8.0


Characteristics:• Cost Effective• Dilution rates are 1:40 for general cleaning, 1:20 for motor

bodies and painted surfaces, and neat usage for degreasing applications


Characteristics:• Appearance: Yellow Cream• Odour: Cirtrus Odour• Specifi c Gravity: 1.00• PH undiluted: 7-8

Biodegradability: Product may be disposed to sewerage system.


Characteristics:• Hi-Tec Ultra Magic is green in colour, water soluble,

non-fl ammable, and is a biodegradable cleaning agent.It has a neutral pH.



SPECIALTY PRODUCTS


CLEANING DETERGENTS

CLEANING ACCESSORIES

SUPER SORBHi-Tec Super Sorb is a lightweight oil absorbent. It can rapidly absorb liquid and retain the liquid against leaching. It does not break down and does not become slippery when wet as do certain other absorbent materials.

Hi-Tec Super Sorb is made from crushed white sedimentary rock formed by the accumulation of the skeletons of marine sponges. The crushed rock retains the original sponge structure ensuring that it retains it’s lightweight, highly porous, super absorbent character.

RAGS Rags can be used for many different services and applications. The product is ideal for wiping and cleaning excess oil and spills in warehouse and workshop.

BLUE AIRHi-Tec Blue Air is an aqueous urea solution used with the Selective Catalytic Reduction technology (SCR) of heavy-duty diesel vehicles to reduce emissions of oxides of nitrogen (NOx) from the exhaust system.

WINDOW CLEANERHi-Tec Window Cleaner is a non hazardous, light duty, biodegradable, slightly alkaline cleaner that can be used in a wide variety of industrial, commercial and household window cleaning applications. It is safe to use on most hard surfaces.

WINDSCREEN ADDITIVEHi-Tec Windscreen Additive is a blue clear liquid concentrate for use in automotive washer reservoirs. Hi-Tec Windscreen Additive is water soluble and non-fl ammable.

Product Size:20kg

Product Sizes:10kg & 20kg bags

Performance Levels:• Volvo, Scania, DAF, Iveco, Mercedes Benz, AllRig, Alliance


Characteristics:• pH: 9.4 – 10.0• Appearance: Clear blue liquid• Odour: Slight ammonia smell• Solubility: 100% soluble in water• Biodegradability: Fully Biodegradable



SPECIALTY PRODUCTS

First Choice for Specialty Products


AEROSOLS

MECHANICS DEGREASERHi-Tec Mechanics Degreaser is a rapid action solvent based aerosol grease remover specially formulated for motor mechanics, trades people and consumers seeking extra cleaning power. It contains modern surfactants and solvents.

Hi-Tec Mechanics Degreaser can be used for cleaning oil, grease and grime from car, truck and motor cycle engines, mowers, outboard motors and other machinery. Applications also include cleaning concrete workshop fl oors, driveways and other surfaces that are heavily contaminated with oil and grease.

Product Size:400g

EVERYDAY DEGREASERHi-Tec Everyday Degreaser has been specially formulated to simply spray on and hose off in one application. Removes grease from engines, outboard motors, lawn mowers, trucks, trailers, metal parts, tools, work surfaces, walls, driveways - the uses are endless.

Product Size:400g

DE-RUST LUBRICANTHi-Tec De-Rust Lubricant is multi-functional water displacing fl uid, possessing effective rust preventative, fi ngerprint suppressant, penetrating fl uid and lubricant properties. Hi-Tec Oils De-Rust Lubricant performs many every day type services in the home as well as industry, having rural, transport, automotive and marine applications. It is non-toxic and will not stain.

Product Size:400g

BRAKE & PARTS CLEANERHi-Tec Brake & Parts Cleaner is a solvent based fl uid for cleaning brakes, brake discs, drums, calipers, chains, wire ropes, bearings and other metal parts requiring the removal of heavy grease and contaminants.

Product Size:400g

TYRE SHINEHi-Tec Tyre Shine has been specially formulated to spray on for a brand new look. Suitable for tyres, mudfl aps, moulds and vinyl trims.

Product Size:350g

CARBY CLEANERHi-Tec Carby Cleaner is a rapid action solvent based aerosol cleaner for carburettors and other fuel dispensing apparatus. It is designed to remove oil, gum, fuel, varnish and carbon deposits from the equipment and to restore the surface to an “as new” appearance.

Product Size:400g

SPECIALTY PRODUCTS


HEAVY DUTY DEGREASERHi-Tec Heavy Duty Degreaser is composed of petroleum solvents and a detergent emulsifi er. The cleaning action of the solvents is enhanced by the presence of aromatic components which improve penetration and solvency.

PARTS WASH SOLVENT Hi-Tec Parts Wash Solvent offers an effective solution for washing or soaking your machine parts in.

BRAKE CLEANER Hi-Tec Brake Cleaner is a solvent based fl uid for cleaning brakes, brake discs, drums, calipers, chains, wire ropes, bearings and other metal parts requiring the removal of heavy grease and contaminants.

SOLVENT BASED CHEMICALS

Characteristics:• Appearance: Clear, colourless liquid• Density, kg/l @15ºC: 0.67 – 0.75• Solubility in Water: Insoluble


Characteristics:• Flash Point: 38°C• Boiling Point: Greater than 150°C• Vapour Pressure: 0.8 kPa at 38°C


Characteristics:• Appearance: Clear liquid• Density, kg/l: Approximately 0.86• Flash Point, ºC: Approximately 42• Solubility in Water: Insoluble


DE-RUST OILHi-Tec De-Rust Oil is a multi-functional water displacing fl uid, possessing effective rust preventative, fi ngerprint suppressant, penetrating fl uid and lubricant properties. Hi-Tec De-Rust Oil performs many every day type services in the home as well as industry, having rural, transport, automotive and marine applications. It is non-toxic and will not stain.

TYRE SHINEHi-Tec Tyre Shine is a silicone based tyre and bumper shine.It leaves surfaces looking glossy and new.

Characteristics:• Rust Preventative: Hi-Tec Oils De-Rust Oil is a very effective

rust preventative for short-term indoor applications. It forms a protective fi lm to inhibit rust and corrosion to 101 items, such as metal components, tools, sporting equipment, locks, hinges, lawn mowers, outboard motors and many more.


Uses and Methods:• Wash tyres and bumpers or any surface that requires treatment. Allow to dry, then simply spray Tyre Shine on to tyres or bumper surfaces. Bumpers may need a wipe with a clean cloth after spraying with Tyre Shine.


SPECIALTY PRODUCTS

First Choice for Specialty Products


SOLVENT BASED CHEMICALS

KEROSENEHi-Tec Kerosene is a petroleum product miscible with many industrial liquids. Kerosene can be used as both a solvent, able to remove other petroleum products, such as chain grease, and also as a lubricant, with less risk of combustion when compared to using petrol. It can also be used as a cooling agent in metal production and treatment (oxygen-free conditions).

X55 SOLVENT Hi-Tec X55 Solvent is a wide boiling range, rapidly evaporating, residue free solvent used for processing, cleaning and degreasing in many industries including printing, paints, adhesives and rubber manufacture.

BUG RID Hi-Tec Bug Rid is a potent biocide for killing and for preventing re-growth of most types of organisms which grow in fuels. Similarly, Hi-Tec Bug Rid acts as a fuel tank corrosion inhibitor and fuel lubricant.



Characteristics:• Character: Hydrocarbon petroleum solvent• Appearance: Clear amber liquid• Specifi c Gravity: 0.832• Packing: 4 litre, 20 litre & 205 litre steel drum• Shelf Life: 24 months if stored in closed drum


PETROL INJECTOR CLEANERHi-Tec Petrol Injector Cleaner is a new gasoline performance additive specifi cally formulated to control port fuel injector, intake valve and combustion chamber deposits.

DIESEL FUEL TREATMENT Hi-Tec Diesel Fuel Treatment is a multifunctional diesel fuel maintenance additive. It is specifi cally designed to give an overall improvement on most aspects of fuel effi ciency.

Characteristics:• Appearance: Light brown coloured liquid• Transparency: Clear• Density, kg/l: 0.82 +/- 0.02


Characteristics:• Fuel injection system is cleaned• Corrosion protection• The active ingredient is USEPA certifi ed• Improves engine performance

Application:• 250ml is suffi cent to treat the entire tank of 60 litres. It is

suitable for all petrol engines and all grades of petrol.


SPECIALTY PRODUCTS

hi-tecoils.com.au

First Choice for Greases

VXP-2 GREASEHi-Tec VXP-2 is a superior, state of the art lithium complex extra heavy duty grease.

It is a high temperature, high extreme pressure (EP) grease designed to meet the demands of the most severe and hostile industrial and off-highway automotive applications and conditions.

LITHPLEX TAC EP-2 GREASEHi-Tec Lithplex TAC EP-2 Grease is a superior, multi-purpose grease possessing excellent lubrication characteristics for a wide range of anti-friction and plain bearings, gears and couplings in automotive, marine, agricultural and industrial application.

SUPER RED EP-2 GREASEHi-Tec Super Red Grease is an NLGI No. 2 grease possessing superior lubrication characteristics.It is recommended for bearing lubrication under operating service conditions from normal to unusually severe.

SUPER MOLYTAC EP-2 GREASEHi-Tec Super Molytac is a superior, multi-purpose, molybdenum disulphide containing grease possessing excellent lubrication characteristics suitable for use in a wide range of anti-friction and plain bearings, ball joints, CV joints, kingpins, and gears and couplings in automotive, marine, agricultural and industrial application.

Characteristics:• NLGI 2 Purple Lithium Complex Grease• Maximum protection against high shock loads• Superior rust and corrosion protection• Excellent mechanical stability• High temperature capability• Prime recommendation for rolling element bearings, plain

bearings, chassis parts, gears and couplings

Product Sizes:450g, 500g, 2.5kg, 20kg, 55kg and 180kg

Characteristics:• NLGI 2 Blue Lithium Complex Grease• Functional Multi-Purpose Grease for low and high

temperatures• Water resistant• Adhesive and cohesive• Prime recommendation for wheel bearings, chassis, boat

trailer wheel bearings, electric motors, and ball joints


Characteristics:• NLGI 2 Lithium grease with enhanced properties• Can be used as a multipurpose grease for both high and low

temperature applications (-20 ºC to 130ºC).• Recommended for chassis, universal joints and wheel

bearings particularly those in vehicles fi tted with disc brakes


Characteristics:• NLGI 2 Grease• Solid Moly particles give superior heavy load and shock load

resistance • Maintain effective lubrication even when water contamination

cannot be avoided• Prime recommendation for plain, ball, roller bearings; and

chassis, universal, CV, (and especially) ball joints.


34

GREASES


TRUCK AND FARM GREASEHi-Tec Truck and Farm Grease is a red, smooth, tacky grease recommended for use in bearings, chassis parts, gears and couplings in automotive, agricultural, marine and industrial applications.

LITH EP-2, 1, 0, 00 GREASEHi-Tec Lith EP Greases possess excellent lubrication characteristics. They are recommended for bearing lubrication under normal or severely loaded service conditions. The NLGI semi fl uid grades No. 00 and No. 0, are recommended for “self leveling” applications or once through, centralised automatic or semi automatic lubrication systems.

SUPER BLUE 3 GREASEHi-Tec Super Blue 3 Grease is an NLGI No. 3 grease possessing superior lubrication characteristics. It is recommended for bearing lubrication from normal to unusually severe load service conditions.

Characteristics:• NLGI 2 Lithium complex • Cater for unusually high load service conditions• High fi lm strength maintains grease consistency• Recommended for chassis universal joints, and other general

lubrication areas in cars, trucks, tractors, trailers etc


Characteristics:• Manufactured with selected paraffi nic and naphthenic base

oils combined with rust, oxidation and corrosion inhibitors• Protects against wear on all moving parts from shock loads in

high load service conditions• High shear stability


Characteristics:• Multi-Purpose Greases• Water Resistant• Bearing and ball joint life extended• High shear stability• Oxidation inhibited• Rust and corrosion inhibited


FOOD MACHINERY GREASEHi-Tec Food Machinery Grease is a premium white aluminium complex grease specially developed for the lubrication of all types of machinery used in the food processing industry.

PETROLEUM JELLYHi-Tec Petroleum Jelly meets the purity requirements of the BP and EP2005, USP28(NF23) and Japanese Pharmacopoeia (XIV) for white soft paraffi n and white petrolatum. Expected shelf life is three years provided the material is stored in closed containers and protected from heat, light and moisture.

Characteristics:• Reduced wear under high shock loads• Excellent resistance to water washout• Superior protection against rust and corrosion• Strong adhesive properties• Halal certifi ed• Microbiologically stable


Characteristics:• Appearance: White, smooth gel• Colour: 1.5 Y Maximum• Brookfi eld Viscosity (DCA022):

6.0 – 12.0 cPs at 10ºC• Cone Penetration (TM 1601):

150 – 170 dmm at 25ºC• Drop Melting Point, ºC: 45 - 60

Product Sizes:500g, 2.5kg and 20kg

35

GREASES

hi-tecoils.com.au

RUBBER GREASE Hi-Tec Rubber Grease is a premium quality clay thickened grease formulated with castor oil to provide outstanding performance in a wide range of automotive and industrial applications where contact with natural and/or synthetic rubber components is required or likely.

NEVER MELT GREASEHi-Tec Never Melt Grease is a multi-functional lubricating grease recommended for bearing applications where operational temperatures can be very high.

COPPER COTE GREASEHi-Tec Copper Cote Grease is a unique, multi-purpose anti-seize compound designed to provide protection against corrosion and metal to metal contact in a wide range of automotive, marine, industrial, workshop and domestic applications, particularly where very high temperatures are encountered. It is effective up to 800ºC due to the high copper content.

CALCIUM SULPHONATE GREASEHi-Tec Calcium Sulphonate Grease is a heavy-duty multi-purpose industrial bearing grease. It is specifi cally designed to perform well under the harshest conditions found in marine environments, steel mills, pulp and paper mills and other similar industries.

HD HAMMER CHISEL PASTEHi-Tec HD Hammer Chisel Paste is a grease formulated to provide lubrication of hydraulic hammers and is fortifi ed with solids to prevent galling and seizing.

Suitable for use in many applications including:• Thermal and mechanical stability• Load carrying and wear protection• Resistance to water• Corrosion resistance• Resistance to oxidation

Product Sizes:450g, 500g, 2.5kg, 20kg and 180kg

Suitable for use in many applications including:• Operating temperature range of –30ºC to +200ºC• Solid content gives protection up to 1000ºC• Top of the range load carrying and wear protection


Characteristics:• Appearance: Red, smooth, buttery• Thickener Type / Oil Base: Clay / Vegetable• Oil Viscosity @ 40ºC, cSt: 315• Normal Temperature Range, ºC: -9 to 80• Drop Point, ºC: >288• Flash Point, ºC: 230

Product Sizes:500g, 2.5kg and 20kg

Suitable for use in many applications including:• Automotive - In cars, trucks, tractors and trailers: Chassis,

universal joints, wheel bearings especially those operating at the high temperatures associated with disc braking systems.

• Industrial - For ball and roller bearings especially where high temperatures are encountered. It is a prime recommendation for automotive, marine and industrial bearings where a long service life is required.


Suitable for use in many applications including:• Thread coating/lubricant for industrial ovens, furnaces

and boilers • Domestic/handyman uses such as screws, nuts & bolts,

hinges plus car & motorcycle parts

Product Sizes:500g, 2.5kg, 20kg and 180kg

36

First Choice for Greases

GREASES


NITRO POLO SHIRTConstructed of 100 percent cotton with embroidered Hi-Tec Oils logo on left chest, printed website on rear.

CARA PENSilver barrel with red rubber retrackable

STAINLESS STEEL KEYRINGKeyring bottle opener

cotton with embroidered Hi-Tec Oils logo on left chest, printed website on rear.

Keyring bottle opener

GOLF UMBRELLA

STUBBY HOLDER

BEANIE

COFFEE MUG

CAPSNITRO UNI-SEX JACKETLightweight showerproof jacket. Embroidered logo on front and printed website and logo on rear.

NITRO BUTTON SHIRTConstructed of 100 percent cotton with embroidered Hi-Tec Oils logo on left chest, printed website on rear.

MOUSE MAT

TOTE BAG

MERCHANDISE

Hi-Tec Oils (Head Offi ce)5 Tarlington Place Smithfi eldNSW 2164

PH: 1300 796 009(02) 9616 5700

FX: (02) 9604 1611

Hi-Tec Oils (Newcastle)8 Kinta Drive Beresfi eldNSW 2322

PH: (02) 4964 4211

Hi-Tec Oils (ACT)Authorised DistributorSuperlube Distributors86 Bayldon Road QueanbeyanNSW 2620

PH: (02) 6232 9515FX: (02) 6232 9511

Hi-Tec Oils (VIC)1 Venture Drive Sunshine WestVIC 3020

PH: (03) 9314 2524FX: (03) 9314 2676

Hi-Tec Oils (TAS)Authorised DistributorDuo Trading Pty Ltd125 Swanston StreetNew Town TAS 7008

PH: 1300 914 616

Hi-Tec Oils (SA)3A Unit 6 & 7, Newcastle CresCavan SA 5094

Ph: (08) 8162 5807FX: (08) 8359 7849

Hi-Tec Oils (Port Lincoln)Pine Freezers Road Port LincolnSA 5606

PH: 0409 162 582

Hi-Tec Oils (QLD)78 Nestor Drive MeadowbrookQLD 4131

PH: (07) 3200 3492FX: (07) 3200 7136

Hi-Tec Oils (WA)Unit 1, 2 Cutting WayYangebupWA 6164

PH: (08) 9418 5380FX: (08) 9418 5380

Hi-Tec Oils (NT)71 Marjorie Street PinelandsNT 0829

PH: (08) 8931 0229FX: (08) 8932 6510

www.hi-tecoils.com.au

Distributed by:

Although every care is taken to ensure accuracy and completeness in compiling this data, no liability can be accepted by Hi-Tec Oils for damage or loss caused by any errors or omissions in the information given, directly or indirectly. Suitability of products referred to in this catalogue is the customers sole responsibility. Always refer to technical data to confi rm suitability which is available on request from Hi-Tec Oils.

Quality Assurance Hi-Tec Oil Traders Pty Ltd has been assessed by QAS International and confi rmed as meeting the quality management systems. The accreditation applies to the following: Manufacture of fi nished lubricants for automotive, commercial and industrial applications. These products also include mineral, semi-synthetic and full synthetic variants. Should you require a copy of our Quality Assurance certifi cate please don’t hesitate to ask.

Hi-Tec Oils Oil Sampling – We offer clients an oil condition monitoring service. The benefi ts of this include extended drain intervals and equipment breakdown prevention.

Date post:	23-Aug-2020
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

Product Catalogue · GM-LL-A-025, GM 4718M, GM 6094M. • ILSAC: GF-5, GF-4 • API: SN, SN-RC, SM,...

Documents