General Purpose TEFC
Single Phase
Two Speed
Woodworking/Arbor Saw
Farm Duty
Commercial Duty SmartMotor
Vector Duty
Inverter Duty
C-Face and D-Flange
50 Hertz
General Purpose ODP• Single and Three Phase• 1/12 Hp thru 600 Hp stock,
to 800 Hp custom• Foot and Face Mount• Enclosures: TEFC and
TENV• Low and medium voltage
including 200V and 575V
• Single and Three Phase• 1/12 Hp thru 600 Hp
stock, to 1500 Hp custom• Foot and Face Mount• Enclosures: ODP, WPI,
WPII• Low and medium voltage
including 200V and 575V
• Single Phase• 1/12 thru 15 Hp stock• Enclosures TEFC, TENV
and ODP• Foot or face mount
• Single and Three Phase• 1/3 thru 60 Hp stock,
custom to 1250 Hp• Enclosures: TEFC, ODP
and Explosion Proof• Foot and face mount• NEMA or IEC Mounting
• Three Phase• 1/12 Hp thru 25 Hp stock,
1000 Hp custom• Enclosures: TEFC, OPEN
and OPSB
• C-Face motors available from stock in most all configurations and product families
• D-Flange motors are available as custom items or through Mod Express
• NEMA or IEC style
• Three Phase• Low Profile• Supplied with keyway and
non threaded shaft• Custom shaft threading thru
Mod Express• Double row ball bearings for
maximum shaft stability• 7-1/2 thru 15 Hp stocked
• 1/3 Hp thru 200 Hp stock, custom to 800 Hp
• Enclosures: TEBC, TENV and TEFC
• Stocked as Washdown, Paint Free, All Stainless and Explosion Proof
• Inverter Gear Motors also available
• Single and Three Phase• 1/3 Hp thru 30 Hp• Foot and Face Mount• Epoxy finish
• 1/3 Hp thru 500 Hp stock, custom to 800 Hp• Enclosures: TEBC and TENV• Stocked with foot and face
mount to 256TC frame• Includes mounted 1024 PPR op-
tical encoder and Milspec-style connector
• 1-10 Hp Washdown duty stocked
• Single and Three Phase• 1/4 Hp thru 3 Hp• Enclosures: ODP and
TEAO• Foot and Face Mount
• 230 or 460 volts• 1 thru 10 Hp stock• TEFC Enclosure: • C-Face with base• Optional 32 character
operator keypad and cable
F2 Mount
Quarry/ Crusher Duty
Automotive Duty
Brake Motors
Design D Oil Field Pump
IEC Frame Metric DC Drive
Tachometers/Feedback Devices
• Enclosures: TEFC and ODP• 1 Hp thru 60 Hp stocked• Super-E Cast Iron TEFC 15
Hp thru 30 Hp in stock• F2 mount on other sizes
available through Mod Express
• Three Phase• 1 thru 15 Hp Quarry Duty
Design C in stock• 100 thru 300 Hp Crusher
Duty stocked with roller bearing for heavy belted loads
• TEFC, U-Frame• 1/4 Hp thru 100 Hp• Epoxy Finish• GM7EQ Approved• High Efficiency• Low Noise Levels
• Single and Three Phase• 1/4 Hp thru 30 Hp stock,
larger available as custom• Standard and Super Efficient• Enclosures: ODP, TEFC,
TENV and Explosion Proof• Foot and Face Mount• Washdown Super-E 1/2 thru 5 Hp
• Three Phase• 2 thru 150 Hp stock• Enclosure: TEFC and ODP• 230/460/796 12-lead or
460/796 6-lead • High slip Design D winding
• 50 or 100 volt/1000 RPM DC tachs available in choice of: PY flange or base mount,
• XC42 or 46 foot and face • 8.5” rabbet pancake style AC or
DC output• PY flange encoder• Hollow shaft encoders and pulse
generators
• Three Phase• 18 thru 30 kW stock, 1100
kW custom• Enclosures: TEFC• F2 mounted Conduit box• B3 foot, B5 flange or B14
face mount• 50 or 60 Hz
• DC SCR Drive• 230 Volt 5 thru 300 Hp• 460 Volt 5 thru 600 Hp• 240 or 500 Armature Volts• DC Motor Field Supply• One Way or Line Regenerative• Armature or Motor Feedback• 115 Volt 1/100 thru 2 Hp
Baldor’s mission is “to be the best (as determined by our customers) marketers, designers and manufacturers…”
Motors
Lifting Magnet Generators
Low Voltage and DC Power
Wound Field DC
Permanent Magnet DC• SCR-rated 90 or 180 volt• 1/50-5 Hp stocked• Enclosures: TENV and TEFC• C-Face with base• Tach Adaptable• Explosion proof in stock 1/4
thru 1.5 Hp• Integral tach in stock 1/4 thru 5 Hp
• SCR-rated 90, 180, 240 or 500 volt• 1/4 thru 500 Hp stocked• Enclosures: TENV, TEFC, DPFG, DPBV, TEUC and TEAO• C-Face with base thru 10 Hp in stock• Tach adaptable• Explosion proof thru 3 Hp in stock
• 12 and 24 volt permanent magnet, 1/4 thru 1 Hp stocked
• 115 and 230 volt com-pound wound power motors stocked 1/3 thru 1.5 Hp, custom to 500 Hp
• Enclosure: TENV and TEFC• Base mounted
• 230 volt, three phase compound wound with drooping voltage characteristic
• 5 thru 40 kW stocked, custom to 100 kW• Heavy steel frame with cast
iron endplates• Choice of foot or foot with face mount
Direct Current Motors and DrivesPRODUCT OVERVIEW
GERMANY DIESELSTRASSE 22 D-85551 KIRCHHEIM MUNICH, GERMANY PHONE: (49) (89) 90508 - 0 FAX: (49) (89) 90508 - 492
INDIA 14, COMMERCE AVENUE MAHAGANESH COLONY PAUD ROAD PUNE - 411 038 MAHARASHTRA, INDIA PHONE: 91 20 25 45 95 31/32 FAX: 91 20 24 55 95 30
ITALY BALDOR ASR AG SUCCURSALE DI MENDRISIO VIA BORROMINI, 20A CH-6850 MENDRISIO SWITZERLAND PHONE: 41 91 640 9952 FAX: 41 91 630 2633
JAPAN DIA BLDG 802, 2-21-1 TSURUYA-CHO, KANAGAWA-KU YOKOHAMA, 221-0835, JAPAN PHONE: 81-45-412-4506 FAX: 81-45-412-4507
KOREA ROOM 210 BUPYEONG INDUSTRIAL COMMERCIAL COOPERATIVE 396-16 CHEONGCHEON 2-DONG, BUPYEONG-GU INCHEON, KOREA, 403-858 PHONE: 82 32 508 3252 FAX: 82 32 508 3253
MÉXICO KM. 2.0 BLVD. AL AEROPUERTO LEÓN 37545, GUANAJUATO, MÉXICO PHONE: 52 477 761 2030 FAX: 52 477 761 2010
MIDDLE EAST & NORTH AFRICA VSE INTERNATIONAL CORP. 3233 NORTH ARLINGTON HEIGHTS SUITE 100W ARLINGTON HEIGHTS, IL 60004 PHONE: 847 590 5547
SINGAPORE 51 KAKI BUKIT ROAD 2 K B WAREHOUSE COMPLEX SINGAPORE 417863 PHONE: (65) 6 744 2572 FAX: (65) 6 747 1708
SWITZERLAND POSTFACH 73 SCHUTZENSTRASSE 59 CH-8245 FEUERTHALEN SWITZERLAND PHONE: (41) (52) 6474700 FAX: (41) (52) 6592394
TAIWAN ROOM R, 2F NO. 124 CHUNG CHENG ROAD SHIHLIN DIST. TAIPEI 11141 PHONE: (886-2) 8866-2991 FAX: (886-2) 2838-2816
UNITED KINGDOM 6 BRISTOL DISTRIBUTION PARK HAWKLEY DRIVE BRISTOL BS32 0BF U.K. PHONE: 44 1454 850000 FAX: 44 1454 859001
NEW YORK AUBURN ONE ELLIS DRIVE AUBURN, NY 13021 PHONE: 315-255-3403 FAX: 315-253-9923
NORTH CAROLINA GREENSBORO 1220 ROTHERWOOD ROAD GREENSBORO, NC 27406 P O BOX 16500 GREENSBORO, NC 27416 PHONE: 336-272-6104 FAX: 336-273-6628
OHIO CINCINNATI 2929 CRESCENTVILLE ROAD WEST CHESTER, OH 45069 PHONE: 513-771-2600 FAX: 513-772-2219
CLEVELAND 8929 FREEWAY DRIVE MACEDONIA, OH 44056 PHONE: 330-468-4777 FAX: 330-468-4778
OKLAHOMA TULSA 2 EAST DAWES BIXBY, OK 74008 PHONE: 918-366-9320 FAX: 918-366-9338
OREGON PORTLAND 20393 SW AVERY COURT TUALATIN, OR 97062 PHONE: 503-691-9010 FAX: 503-691-9012
PENNSYLVANIA PHILADELPHIA 1035 THOMAS BUSCH MEMORIAL HIGHWAY PENNSAUKEN, NJ 08110 PHONE: 856-661-1442 FAX: 856-663-6363
PITTSBURGH 616H BEATTY ROAD MONROEVILLE, PA 15146 PHONE: 412-380-7244 FAX: 412-380-7250
IOWA DES MOINES 1800 DIXON STREET, SUITE C DES MOINES, IA 50316 PHONE: 515-263-6929 FAX: 515-263-6515
MARYLAND BALTIMORE 6660 SANTA BARBARA RD. SUITE 22-24 ELKRIDGE, MD 21075 PHONE: 410-579-2135 FAX: 410-579-2677
MASSACHUSETTS BOSTON 6 PULLMAN STREET WORCESTER, MA 01606 PHONE: 508-854-0708 FAX: 508-854-0291
MICHIGAN DETROIT 33782 STERLING PONDS BLVD. STERLING HEIGHTS, MI 48312 PHONE: 586-978-9800 FAX: 586-978-9969
GRAND RAPIDS 668 3 MILE ROAD NW GRAND RAPIDS, MI 49504 PHONE: 616-785-1784 FAX: 616-785-1788
MINNESOTA MINNEAPOLIS 21080 134TH AVE. NORTH ROGERS, MN 55374 PHONE: 763-428-3633 FAX: 763-428-4551
MISSOURI ST LOUIS 422 INDUSTRIAL DRIVE MARYLAND HEIGHTS, MO 63043 PHONE: 314-298-1800 FAX: 314-298-7660
KANSAS CITY 915 N W PLATTE VALLEY DR RIVERSIDE, MO 64150 PHONE: 816-587-0272 FAX: 816-587-3735
TENNESSEE MEMPHIS 4000 WINCHESTER ROAD MEMPHIS, TN 38118 PHONE: 901-365-2020 FAX: 901-365-3914
TEXAS HOUSTON 4647 PINE TIMBERS SUITE # 135 HOUSTON, TX 77041 PHONE: 713-895-7062 FAX: 713-690-4540
DALLAS 3040 QUEBEC DALLAS, TX 75247 PHONE: 214-634-7271 FAX: 214-634-8874
UTAH SALT LAKE CITY 2230 SOUTH MAIN STREET SALT LAKE CITY, UT 84115 PHONE: 801-832-0127 FAX: 801-832-8911
WISCONSIN MILWAUKEE 2725 SOUTH 163RD STREET NEW BERLIN, WI 53151 PHONE: 262-784-5940 FAX: 262-784-1215
INTERNATIONAL SALES FORT SMITH, AR P.O. BOX 2400 FORT SMITH, AR 72902 PHONE: 479-646-4711 FAX: 479-648-5895
CANADA EDMONTON, ALBERTA 4053-92 STREET EDMONTON, ALBERTA T6E 6R8 PHONE: 780-434-4900 FAX: 780-438-2600
OAKVILLE, ONTARIO 2750 COVENTRY ROAD OAKVILLE, ONTARIO L6H 6R1 PHONE: 905-829-3301 FAX: 905-829-3302
MONTREAL, QUEBEC 1844 WILLIAM STREET MONTREAL, QUEBEC H3J 1R5 PHONE: 514-933-2711 FAX: 514-933-8639
VANCOUVER, BRITISH COLUMBIA 1538 KEBET WAY PORT COQUITLAM, BC V3C 5M5 PHONE 604-421-2822 FAX: 604-421-3113
WINNIPEG, MANITOBA 54 PRINCESS STREET WINNIPEG, MANITOBA R3B 1K2 PHONE: 204-942-5205 FAX: 204-956-4251
AUSTRALIA UNIT 3, 6 STANTON ROAD SEVEN HILLS, NSW 2147, AUSTRALIA PHONE: (61) (2) 9674 5455 FAX: (61) (2) 9674 2495
UNIT 8, 5 KELLETTS ROAD ROWVILLE, VICTORIA, 3178 AUSTRALIA PHONE: (61) (3) 9753 4355 FAX: (61) (3) 9753 4366
BALDOR CENTROAMERICA RESIDENCIAL PINARES DE SUIZA POL. 15 #44, NVA. SAN SALVADOR EL SALVADOR, CENTRO AMERICA PHONE: (503) 288-1519 FAX: (503) 288-1518
BALDOR SUDAMERICA CALLE F, EL CANGREJO CONDOMINIO P.H. CONDADO PLAZA APT. 11D, BELLA VISTA PANAMÁ CITY, REP. DE PANAMÁ PHONE: (507) 265-6041
CHINA SHANGHAI JIAHUA BUSINESS CENTER ROOM NO. A-8421 808 HONG QIAO ROAD SHANGHAI 200030 PHONE: 86-21-64473060 FAX: 86-21-64078620
UNITED STATES
ARIZONA PHOENIX 4211 S 43RD PLACE PHOENIX, AZ 85040 PHONE: 602-470-0407 FAX: 602-470-0464
CALIFORNIA LOS ANGELES 6480 FLOTILLA COMMERCE, CA 90040 PHONE: 323-724-6771 FAX: 323-721-5859
HAYWARD 21056 FORBES STREET HAYWARD, CA 94545 PHONE: 510-785-9900 FAX: 510-785-9910 COLORADO DENVER 2520 W BARBERRY PLACE DENVER, CO 80204 PHONE: 303-623-0127 FAX: 303-595-3772
CONNECTICUT WALLINGFORD 65 SOUTH TURNPIKE ROAD WALLINGFORD, CT 06492 PHONE: 203-269-1354 FAX: 203-269-5485
FLORIDA TAMPA/PUERTO RICO/ VIRGIN ISLANDS 3906 EAST 11TH AVENUE TAMPA, FL 33605 PHONE: 813-248-5078 FAX: 813-247-2984
GEORGIA ATLANTA 62 TECHNOLOGY DR. ALPHARETTA, GA 30005 PHONE: 770-772-7000 FAX: 770-772-7200
ILLINOIS CHICAGO 1601 FRONTENAC ROAD NAPERVILLE, IL 60563 PHONE: 630-848-5100 FAX: 630-848-5110
INDIANA INDIANAPOLIS 5525 W. MINNESOTA STREET INDIANAPOLIS, IN 46241 PHONE: 317-246-5100 FAX: 317-246-5110 800-428-4141
P.O. Box 2400 • Fort Smith, AR 72902-2400 U.S.A.Ph: (479) 646-4711 • Fax (479) 648-5792
International Fax (479) 648-5895www.baldor.com
BALDOR DISTRICT OFFICES
© Baldor Electric CompanyForm 1
Printed in the USA3/05 PROG 50,000
General Purpose TEFC
Single Phase
Two Speed
Woodworking/Arbor Saw
Farm Duty
Commercial Duty SmartMotor
Vector Duty
Inverter Duty
C-Face and D-Flange
50 Hertz
General Purpose ODP• Single and Three Phase• 1/12 Hp thru 600 Hp stock,
to 800 Hp custom• Foot and Face Mount• Enclosures: TEFC and
TENV• Low and medium voltage
including 200V and 575V
• Single and Three Phase• 1/12 Hp thru 600 Hp
stock, to 1500 Hp custom• Foot and Face Mount• Enclosures: ODP, WPI,
WPII• Low and medium voltage
including 200V and 575V
• Single Phase• 1/12 thru 15 Hp stock• Enclosures TEFC, TENV
and ODP• Foot or face mount
• Single and Three Phase• 1/3 thru 60 Hp stock,
custom to 1250 Hp• Enclosures: TEFC, ODP
and Explosion Proof• Foot and face mount• NEMA or IEC Mounting
• Three Phase• 1/12 Hp thru 25 Hp stock,
1000 Hp custom• Enclosures: TEFC, OPEN
and OPSB
• C-Face motors available from stock in most all configurations and product families
• D-Flange motors are available as custom items or through Mod Express
• NEMA or IEC style
• Three Phase• Low Profile• Supplied with keyway and
non threaded shaft• Custom shaft threading thru
Mod Express• Double row ball bearings for
maximum shaft stability• 7-1/2 thru 15 Hp stocked
• 1/3 Hp thru 200 Hp stock, custom to 800 Hp
• Enclosures: TEBC, TENV and TEFC
• Stocked as Washdown, Paint Free, All Stainless and Explosion Proof
• Inverter Gear Motors also available
• Single and Three Phase• 1/3 Hp thru 30 Hp• Foot and Face Mount• Epoxy finish
• 1/3 Hp thru 500 Hp stock, custom to 800 Hp• Enclosures: TEBC and TENV• Stocked with foot and face
mount to 256TC frame• Includes mounted 1024 PPR op-
tical encoder and Milspec-style connector
• 1-10 Hp Washdown duty stocked
• Single and Three Phase• 1/4 Hp thru 3 Hp• Enclosures: ODP and
TEAO• Foot and Face Mount
• 230 or 460 volts• 1 thru 10 Hp stock• TEFC Enclosure: • C-Face with base• Optional 32 character
operator keypad and cable
F2 Mount
Quarry/ Crusher Duty
Automotive Duty
Brake Motors
Design D Oil Field Pump
IEC Frame Metric DC Drive
Tachometers/Feedback Devices
• Enclosures: TEFC and ODP• 1 Hp thru 60 Hp stocked• Super-E Cast Iron TEFC 15
Hp thru 30 Hp in stock• F2 mount on other sizes
available through Mod Express
• Three Phase• 1 thru 15 Hp Quarry Duty
Design C in stock• 100 thru 300 Hp Crusher
Duty stocked with roller bearing for heavy belted loads
• TEFC, U-Frame• 1/4 Hp thru 100 Hp• Epoxy Finish• GM7EQ Approved• High Efficiency• Low Noise Levels
• Single and Three Phase• 1/4 Hp thru 30 Hp stock,
larger available as custom• Standard and Super Efficient• Enclosures: ODP, TEFC,
TENV and Explosion Proof• Foot and Face Mount• Washdown Super-E 1/2 thru 5 Hp
• Three Phase• 2 thru 150 Hp stock• Enclosure: TEFC and ODP• 230/460/796 12-lead or
460/796 6-lead • High slip Design D winding
• 50 or 100 volt/1000 RPM DC tachs available in choice of: PY flange or base mount,
• XC42 or 46 foot and face • 8.5” rabbet pancake style AC or
DC output• PY flange encoder• Hollow shaft encoders and pulse
generators
• Three Phase• 18 thru 30 kW stock, 1100
kW custom• Enclosures: TEFC• F2 mounted Conduit box• B3 foot, B5 flange or B14
face mount• 50 or 60 Hz
• DC SCR Drive• 230 Volt 5 thru 300 Hp• 460 Volt 5 thru 600 Hp• 240 or 500 Armature Volts• DC Motor Field Supply• One Way or Line Regenerative• Armature or Motor Feedback• 115 Volt 1/100 thru 2 Hp
Baldor’s mission is “to be the best (as determined by our customers) marketers, designers and manufacturers…”
Motors
Lifting Magnet Generators
Low Voltage and DC Power
Wound Field DC
Permanent Magnet DC• SCR-rated 90 or 180 volt• 1/50-5 Hp stocked• Enclosures: TENV and TEFC• C-Face with base• Tach Adaptable• Explosion proof in stock 1/4
thru 1.5 Hp• Integral tach in stock 1/4 thru 5 Hp
• SCR-rated 90, 180, 240 or 500 volt• 1/4 thru 500 Hp stocked• Enclosures: TENV, TEFC, DPFG, DPBV, TEUC and TEAO• C-Face with base thru 10 Hp in stock• Tach adaptable• Explosion proof thru 3 Hp in stock
• 12 and 24 volt permanent magnet, 1/4 thru 1 Hp stocked
• 115 and 230 volt com-pound wound power motors stocked 1/3 thru 1.5 Hp, custom to 500 Hp
• Enclosure: TENV and TEFC• Base mounted
• 230 volt, three phase compound wound with drooping voltage characteristic
• 5 thru 40 kW stocked, custom to 100 kW• Heavy steel frame with cast
iron endplates• Choice of foot or foot with face mount
Direct Current Motors and DrivesPRODUCT OVERVIEW
GERMANY DIESELSTRASSE 22 D-85551 KIRCHHEIM MUNICH, GERMANY PHONE: (49) (89) 90508 - 0 FAX: (49) (89) 90508 - 492
INDIA 14, COMMERCE AVENUE MAHAGANESH COLONY PAUD ROAD PUNE - 411 038 MAHARASHTRA, INDIA PHONE: 91 20 25 45 95 31/32 FAX: 91 20 24 55 95 30
ITALY BALDOR ASR AG SUCCURSALE DI MENDRISIO VIA BORROMINI, 20A CH-6850 MENDRISIO SWITZERLAND PHONE: 41 91 640 9952 FAX: 41 91 630 2633
JAPAN DIA BLDG 802, 2-21-1 TSURUYA-CHO, KANAGAWA-KU YOKOHAMA, 221-0835, JAPAN PHONE: 81-45-412-4506 FAX: 81-45-412-4507
KOREA ROOM 210 BUPYEONG INDUSTRIAL COMMERCIAL COOPERATIVE 396-16 CHEONGCHEON 2-DONG, BUPYEONG-GU INCHEON, KOREA, 403-858 PHONE: 82 32 508 3252 FAX: 82 32 508 3253
MÉXICO KM. 2.0 BLVD. AL AEROPUERTO LEÓN 37545, GUANAJUATO, MÉXICO PHONE: 52 477 761 2030 FAX: 52 477 761 2010
MIDDLE EAST & NORTH AFRICA VSE INTERNATIONAL CORP. 3233 NORTH ARLINGTON HEIGHTS SUITE 100W ARLINGTON HEIGHTS, IL 60004 PHONE: 847 590 5547
SINGAPORE 51 KAKI BUKIT ROAD 2 K B WAREHOUSE COMPLEX SINGAPORE 417863 PHONE: (65) 6 744 2572 FAX: (65) 6 747 1708
SWITZERLAND POSTFACH 73 SCHUTZENSTRASSE 59 CH-8245 FEUERTHALEN SWITZERLAND PHONE: (41) (52) 6474700 FAX: (41) (52) 6592394
TAIWAN ROOM R, 2F NO. 124 CHUNG CHENG ROAD SHIHLIN DIST. TAIPEI 11141 PHONE: (886-2) 8866-2991 FAX: (886-2) 2838-2816
UNITED KINGDOM 6 BRISTOL DISTRIBUTION PARK HAWKLEY DRIVE BRISTOL BS32 0BF U.K. PHONE: 44 1454 850000 FAX: 44 1454 859001
NEW YORK AUBURN ONE ELLIS DRIVE AUBURN, NY 13021 PHONE: 315-255-3403 FAX: 315-253-9923
NORTH CAROLINA GREENSBORO 1220 ROTHERWOOD ROAD GREENSBORO, NC 27406 P O BOX 16500 GREENSBORO, NC 27416 PHONE: 336-272-6104 FAX: 336-273-6628
OHIO CINCINNATI 2929 CRESCENTVILLE ROAD WEST CHESTER, OH 45069 PHONE: 513-771-2600 FAX: 513-772-2219
CLEVELAND 8929 FREEWAY DRIVE MACEDONIA, OH 44056 PHONE: 330-468-4777 FAX: 330-468-4778
OKLAHOMA TULSA 2 EAST DAWES BIXBY, OK 74008 PHONE: 918-366-9320 FAX: 918-366-9338
OREGON PORTLAND 20393 SW AVERY COURT TUALATIN, OR 97062 PHONE: 503-691-9010 FAX: 503-691-9012
PENNSYLVANIA PHILADELPHIA 1035 THOMAS BUSCH MEMORIAL HIGHWAY PENNSAUKEN, NJ 08110 PHONE: 856-661-1442 FAX: 856-663-6363
PITTSBURGH 616H BEATTY ROAD MONROEVILLE, PA 15146 PHONE: 412-380-7244 FAX: 412-380-7250
IOWA DES MOINES 1800 DIXON STREET, SUITE C DES MOINES, IA 50316 PHONE: 515-263-6929 FAX: 515-263-6515
MARYLAND BALTIMORE 6660 SANTA BARBARA RD. SUITE 22-24 ELKRIDGE, MD 21075 PHONE: 410-579-2135 FAX: 410-579-2677
MASSACHUSETTS BOSTON 6 PULLMAN STREET WORCESTER, MA 01606 PHONE: 508-854-0708 FAX: 508-854-0291
MICHIGAN DETROIT 33782 STERLING PONDS BLVD. STERLING HEIGHTS, MI 48312 PHONE: 586-978-9800 FAX: 586-978-9969
GRAND RAPIDS 668 3 MILE ROAD NW GRAND RAPIDS, MI 49504 PHONE: 616-785-1784 FAX: 616-785-1788
MINNESOTA MINNEAPOLIS 21080 134TH AVE. NORTH ROGERS, MN 55374 PHONE: 763-428-3633 FAX: 763-428-4551
MISSOURI ST LOUIS 422 INDUSTRIAL DRIVE MARYLAND HEIGHTS, MO 63043 PHONE: 314-298-1800 FAX: 314-298-7660
KANSAS CITY 915 N W PLATTE VALLEY DR RIVERSIDE, MO 64150 PHONE: 816-587-0272 FAX: 816-587-3735
TENNESSEE MEMPHIS 4000 WINCHESTER ROAD MEMPHIS, TN 38118 PHONE: 901-365-2020 FAX: 901-365-3914
TEXAS HOUSTON 4647 PINE TIMBERS SUITE # 135 HOUSTON, TX 77041 PHONE: 713-895-7062 FAX: 713-690-4540
DALLAS 3040 QUEBEC DALLAS, TX 75247 PHONE: 214-634-7271 FAX: 214-634-8874
UTAH SALT LAKE CITY 2230 SOUTH MAIN STREET SALT LAKE CITY, UT 84115 PHONE: 801-832-0127 FAX: 801-832-8911
WISCONSIN MILWAUKEE 2725 SOUTH 163RD STREET NEW BERLIN, WI 53151 PHONE: 262-784-5940 FAX: 262-784-1215
INTERNATIONAL SALES FORT SMITH, AR P.O. BOX 2400 FORT SMITH, AR 72902 PHONE: 479-646-4711 FAX: 479-648-5895
CANADA EDMONTON, ALBERTA 4053-92 STREET EDMONTON, ALBERTA T6E 6R8 PHONE: 780-434-4900 FAX: 780-438-2600
OAKVILLE, ONTARIO 2750 COVENTRY ROAD OAKVILLE, ONTARIO L6H 6R1 PHONE: 905-829-3301 FAX: 905-829-3302
MONTREAL, QUEBEC 1844 WILLIAM STREET MONTREAL, QUEBEC H3J 1R5 PHONE: 514-933-2711 FAX: 514-933-8639
VANCOUVER, BRITISH COLUMBIA 1538 KEBET WAY PORT COQUITLAM, BC V3C 5M5 PHONE 604-421-2822 FAX: 604-421-3113
WINNIPEG, MANITOBA 54 PRINCESS STREET WINNIPEG, MANITOBA R3B 1K2 PHONE: 204-942-5205 FAX: 204-956-4251
AUSTRALIA UNIT 3, 6 STANTON ROAD SEVEN HILLS, NSW 2147, AUSTRALIA PHONE: (61) (2) 9674 5455 FAX: (61) (2) 9674 2495
UNIT 8, 5 KELLETTS ROAD ROWVILLE, VICTORIA, 3178 AUSTRALIA PHONE: (61) (3) 9753 4355 FAX: (61) (3) 9753 4366
BALDOR CENTROAMERICA RESIDENCIAL PINARES DE SUIZA POL. 15 #44, NVA. SAN SALVADOR EL SALVADOR, CENTRO AMERICA PHONE: (503) 288-1519 FAX: (503) 288-1518
BALDOR SUDAMERICA CALLE F, EL CANGREJO CONDOMINIO P.H. CONDADO PLAZA APT. 11D, BELLA VISTA PANAMÁ CITY, REP. DE PANAMÁ PHONE: (507) 265-6041
CHINA SHANGHAI JIAHUA BUSINESS CENTER ROOM NO. A-8421 808 HONG QIAO ROAD SHANGHAI 200030 PHONE: 86-21-64473060 FAX: 86-21-64078620
UNITED STATES
ARIZONA PHOENIX 4211 S 43RD PLACE PHOENIX, AZ 85040 PHONE: 602-470-0407 FAX: 602-470-0464
CALIFORNIA LOS ANGELES 6480 FLOTILLA COMMERCE, CA 90040 PHONE: 323-724-6771 FAX: 323-721-5859
HAYWARD 21056 FORBES STREET HAYWARD, CA 94545 PHONE: 510-785-9900 FAX: 510-785-9910 COLORADO DENVER 2520 W BARBERRY PLACE DENVER, CO 80204 PHONE: 303-623-0127 FAX: 303-595-3772
CONNECTICUT WALLINGFORD 65 SOUTH TURNPIKE ROAD WALLINGFORD, CT 06492 PHONE: 203-269-1354 FAX: 203-269-5485
FLORIDA TAMPA/PUERTO RICO/ VIRGIN ISLANDS 3906 EAST 11TH AVENUE TAMPA, FL 33605 PHONE: 813-248-5078 FAX: 813-247-2984
GEORGIA ATLANTA 62 TECHNOLOGY DR. ALPHARETTA, GA 30005 PHONE: 770-772-7000 FAX: 770-772-7200
ILLINOIS CHICAGO 1601 FRONTENAC ROAD NAPERVILLE, IL 60563 PHONE: 630-848-5100 FAX: 630-848-5110
INDIANA INDIANAPOLIS 5525 W. MINNESOTA STREET INDIANAPOLIS, IN 46241 PHONE: 317-246-5100 FAX: 317-246-5110 800-428-4141
P.O. Box 2400 • Fort Smith, AR 72902-2400 U.S.A.Ph: (479) 646-4711 • Fax (479) 648-5792
International Fax (479) 648-5895www.baldor.com
BALDOR DISTRICT OFFICES
© Baldor Electric CompanyForm 1
Printed in the USA3/05 PROG 50,000
General Purpose TEFC
Single Phase
Two Speed
Woodworking/Arbor Saw
Farm Duty
Commercial Duty SmartMotor
Vector Duty
Inverter Duty
C-Face and D-Flange
50 Hertz
General Purpose ODP• Single and Three Phase• 1/12 Hp thru 600 Hp stock,
to 800 Hp custom• Foot and Face Mount• Enclosures: TEFC and
TENV• Low and medium voltage
including 200V and 575V
• Single and Three Phase• 1/12 Hp thru 600 Hp
stock, to 1500 Hp custom• Foot and Face Mount• Enclosures: ODP, WPI,
WPII• Low and medium voltage
including 200V and 575V
• Single Phase• 1/12 thru 15 Hp stock• Enclosures TEFC, TENV
and ODP• Foot or face mount
• Single and Three Phase• 1/3 thru 60 Hp stock,
custom to 1250 Hp• Enclosures: TEFC, ODP
and Explosion Proof• Foot and face mount• NEMA or IEC Mounting
• Three Phase• 1/12 Hp thru 25 Hp stock,
1000 Hp custom• Enclosures: TEFC, OPEN
and OPSB
• C-Face motors available from stock in most all configurations and product families
• D-Flange motors are available as custom items or through Mod Express
• NEMA or IEC style
• Three Phase• Low Profile• Supplied with keyway and
non threaded shaft• Custom shaft threading thru
Mod Express• Double row ball bearings for
maximum shaft stability• 7-1/2 thru 15 Hp stocked
• 1/3 Hp thru 200 Hp stock, custom to 800 Hp
• Enclosures: TEBC, TENV and TEFC
• Stocked as Washdown, Paint Free, All Stainless and Explosion Proof
• Inverter Gear Motors also available
• Single and Three Phase• 1/3 Hp thru 30 Hp• Foot and Face Mount• Epoxy finish
• 1/3 Hp thru 500 Hp stock, custom to 800 Hp• Enclosures: TEBC and TENV• Stocked with foot and face
mount to 256TC frame• Includes mounted 1024 PPR op-
tical encoder and Milspec-style connector
• 1-10 Hp Washdown duty stocked
• Single and Three Phase• 1/4 Hp thru 3 Hp• Enclosures: ODP and
TEAO• Foot and Face Mount
• 230 or 460 volts• 1 thru 10 Hp stock• TEFC Enclosure: • C-Face with base• Optional 32 character
operator keypad and cable
F2 Mount
Quarry/ Crusher Duty
Automotive Duty
Brake Motors
Design D Oil Field Pump
IEC Frame Metric DC Drive
Tachometers/Feedback Devices
• Enclosures: TEFC and ODP• 1 Hp thru 60 Hp stocked• Super-E Cast Iron TEFC 15
Hp thru 30 Hp in stock• F2 mount on other sizes
available through Mod Express
• Three Phase• 1 thru 15 Hp Quarry Duty
Design C in stock• 100 thru 300 Hp Crusher
Duty stocked with roller bearing for heavy belted loads
• TEFC, U-Frame• 1/4 Hp thru 100 Hp• Epoxy Finish• GM7EQ Approved• High Efficiency• Low Noise Levels
• Single and Three Phase• 1/4 Hp thru 30 Hp stock,
larger available as custom• Standard and Super Efficient• Enclosures: ODP, TEFC,
TENV and Explosion Proof• Foot and Face Mount• Washdown Super-E 1/2 thru 5 Hp
• Three Phase• 2 thru 150 Hp stock• Enclosure: TEFC and ODP• 230/460/796 12-lead or
460/796 6-lead • High slip Design D winding
• 50 or 100 volt/1000 RPM DC tachs available in choice of: PY flange or base mount,
• XC42 or 46 foot and face • 8.5” rabbet pancake style AC or
DC output• PY flange encoder• Hollow shaft encoders and pulse
generators
• Three Phase• 18 thru 30 kW stock, 1100
kW custom• Enclosures: TEFC• F2 mounted Conduit box• B3 foot, B5 flange or B14
face mount• 50 or 60 Hz
• DC SCR Drive• 230 Volt 5 thru 300 Hp• 460 Volt 5 thru 600 Hp• 240 or 500 Armature Volts• DC Motor Field Supply• One Way or Line Regenerative• Armature or Motor Feedback• 115 Volt 1/100 thru 2 Hp
Baldor’s mission is “to be the best (as determined by our customers) marketers, designers and manufacturers…”
Motors
Lifting Magnet Generators
Low Voltage and DC Power
Wound Field DC
Permanent Magnet DC• SCR-rated 90 or 180 volt• 1/50-5 Hp stocked• Enclosures: TENV and TEFC• C-Face with base• Tach Adaptable• Explosion proof in stock 1/4
thru 1.5 Hp• Integral tach in stock 1/4 thru 5 Hp
• SCR-rated 90, 180, 240 or 500 volt• 1/4 thru 500 Hp stocked• Enclosures: TENV, TEFC, DPFG, DPBV, TEUC and TEAO• C-Face with base thru 10 Hp in stock• Tach adaptable• Explosion proof thru 3 Hp in stock
• 12 and 24 volt permanent magnet, 1/4 thru 1 Hp stocked
• 115 and 230 volt com-pound wound power motors stocked 1/3 thru 1.5 Hp, custom to 500 Hp
• Enclosure: TENV and TEFC• Base mounted
• 230 volt, three phase compound wound with drooping voltage characteristic
• 5 thru 40 kW stocked, custom to 100 kW• Heavy steel frame with cast
iron endplates• Choice of foot or foot with face mount
Direct Current Motors and DrivesPRODUCT OVERVIEW
GERMANY DIESELSTRASSE 22 D-85551 KIRCHHEIM MUNICH, GERMANY PHONE: (49) (89) 90508 - 0 FAX: (49) (89) 90508 - 492
INDIA 14, COMMERCE AVENUE MAHAGANESH COLONY PAUD ROAD PUNE - 411 038 MAHARASHTRA, INDIA PHONE: 91 20 25 45 95 31/32 FAX: 91 20 24 55 95 30
ITALY BALDOR ASR AG SUCCURSALE DI MENDRISIO VIA BORROMINI, 20A CH-6850 MENDRISIO SWITZERLAND PHONE: 41 91 640 9952 FAX: 41 91 630 2633
JAPAN DIA BLDG 802, 2-21-1 TSURUYA-CHO, KANAGAWA-KU YOKOHAMA, 221-0835, JAPAN PHONE: 81-45-412-4506 FAX: 81-45-412-4507
KOREA ROOM 210 BUPYEONG INDUSTRIAL COMMERCIAL COOPERATIVE 396-16 CHEONGCHEON 2-DONG, BUPYEONG-GU INCHEON, KOREA, 403-858 PHONE: 82 32 508 3252 FAX: 82 32 508 3253
MÉXICO KM. 2.0 BLVD. AL AEROPUERTO LEÓN 37545, GUANAJUATO, MÉXICO PHONE: 52 477 761 2030 FAX: 52 477 761 2010
MIDDLE EAST & NORTH AFRICA VSE INTERNATIONAL CORP. 3233 NORTH ARLINGTON HEIGHTS SUITE 100W ARLINGTON HEIGHTS, IL 60004 PHONE: 847 590 5547
SINGAPORE 51 KAKI BUKIT ROAD 2 K B WAREHOUSE COMPLEX SINGAPORE 417863 PHONE: (65) 6 744 2572 FAX: (65) 6 747 1708
SWITZERLAND POSTFACH 73 SCHUTZENSTRASSE 59 CH-8245 FEUERTHALEN SWITZERLAND PHONE: (41) (52) 6474700 FAX: (41) (52) 6592394
TAIWAN ROOM R, 2F NO. 124 CHUNG CHENG ROAD SHIHLIN DIST. TAIPEI 11141 PHONE: (886-2) 8866-2991 FAX: (886-2) 2838-2816
UNITED KINGDOM 6 BRISTOL DISTRIBUTION PARK HAWKLEY DRIVE BRISTOL BS32 0BF U.K. PHONE: 44 1454 850000 FAX: 44 1454 859001
NEW YORK AUBURN ONE ELLIS DRIVE AUBURN, NY 13021 PHONE: 315-255-3403 FAX: 315-253-9923
NORTH CAROLINA GREENSBORO 1220 ROTHERWOOD ROAD GREENSBORO, NC 27406 P O BOX 16500 GREENSBORO, NC 27416 PHONE: 336-272-6104 FAX: 336-273-6628
OHIO CINCINNATI 2929 CRESCENTVILLE ROAD WEST CHESTER, OH 45069 PHONE: 513-771-2600 FAX: 513-772-2219
CLEVELAND 8929 FREEWAY DRIVE MACEDONIA, OH 44056 PHONE: 330-468-4777 FAX: 330-468-4778
OKLAHOMA TULSA 2 EAST DAWES BIXBY, OK 74008 PHONE: 918-366-9320 FAX: 918-366-9338
OREGON PORTLAND 20393 SW AVERY COURT TUALATIN, OR 97062 PHONE: 503-691-9010 FAX: 503-691-9012
PENNSYLVANIA PHILADELPHIA 1035 THOMAS BUSCH MEMORIAL HIGHWAY PENNSAUKEN, NJ 08110 PHONE: 856-661-1442 FAX: 856-663-6363
PITTSBURGH 616H BEATTY ROAD MONROEVILLE, PA 15146 PHONE: 412-380-7244 FAX: 412-380-7250
IOWA DES MOINES 1800 DIXON STREET, SUITE C DES MOINES, IA 50316 PHONE: 515-263-6929 FAX: 515-263-6515
MARYLAND BALTIMORE 6660 SANTA BARBARA RD. SUITE 22-24 ELKRIDGE, MD 21075 PHONE: 410-579-2135 FAX: 410-579-2677
MASSACHUSETTS BOSTON 6 PULLMAN STREET WORCESTER, MA 01606 PHONE: 508-854-0708 FAX: 508-854-0291
MICHIGAN DETROIT 33782 STERLING PONDS BLVD. STERLING HEIGHTS, MI 48312 PHONE: 586-978-9800 FAX: 586-978-9969
GRAND RAPIDS 668 3 MILE ROAD NW GRAND RAPIDS, MI 49504 PHONE: 616-785-1784 FAX: 616-785-1788
MINNESOTA MINNEAPOLIS 21080 134TH AVE. NORTH ROGERS, MN 55374 PHONE: 763-428-3633 FAX: 763-428-4551
MISSOURI ST LOUIS 422 INDUSTRIAL DRIVE MARYLAND HEIGHTS, MO 63043 PHONE: 314-298-1800 FAX: 314-298-7660
KANSAS CITY 915 N W PLATTE VALLEY DR RIVERSIDE, MO 64150 PHONE: 816-587-0272 FAX: 816-587-3735
TENNESSEE MEMPHIS 4000 WINCHESTER ROAD MEMPHIS, TN 38118 PHONE: 901-365-2020 FAX: 901-365-3914
TEXAS HOUSTON 4647 PINE TIMBERS SUITE # 135 HOUSTON, TX 77041 PHONE: 713-895-7062 FAX: 713-690-4540
DALLAS 3040 QUEBEC DALLAS, TX 75247 PHONE: 214-634-7271 FAX: 214-634-8874
UTAH SALT LAKE CITY 2230 SOUTH MAIN STREET SALT LAKE CITY, UT 84115 PHONE: 801-832-0127 FAX: 801-832-8911
WISCONSIN MILWAUKEE 2725 SOUTH 163RD STREET NEW BERLIN, WI 53151 PHONE: 262-784-5940 FAX: 262-784-1215
INTERNATIONAL SALES FORT SMITH, AR P.O. BOX 2400 FORT SMITH, AR 72902 PHONE: 479-646-4711 FAX: 479-648-5895
CANADA EDMONTON, ALBERTA 4053-92 STREET EDMONTON, ALBERTA T6E 6R8 PHONE: 780-434-4900 FAX: 780-438-2600
OAKVILLE, ONTARIO 2750 COVENTRY ROAD OAKVILLE, ONTARIO L6H 6R1 PHONE: 905-829-3301 FAX: 905-829-3302
MONTREAL, QUEBEC 1844 WILLIAM STREET MONTREAL, QUEBEC H3J 1R5 PHONE: 514-933-2711 FAX: 514-933-8639
VANCOUVER, BRITISH COLUMBIA 1538 KEBET WAY PORT COQUITLAM, BC V3C 5M5 PHONE 604-421-2822 FAX: 604-421-3113
WINNIPEG, MANITOBA 54 PRINCESS STREET WINNIPEG, MANITOBA R3B 1K2 PHONE: 204-942-5205 FAX: 204-956-4251
AUSTRALIA UNIT 3, 6 STANTON ROAD SEVEN HILLS, NSW 2147, AUSTRALIA PHONE: (61) (2) 9674 5455 FAX: (61) (2) 9674 2495
UNIT 8, 5 KELLETTS ROAD ROWVILLE, VICTORIA, 3178 AUSTRALIA PHONE: (61) (3) 9753 4355 FAX: (61) (3) 9753 4366
BALDOR CENTROAMERICA RESIDENCIAL PINARES DE SUIZA POL. 15 #44, NVA. SAN SALVADOR EL SALVADOR, CENTRO AMERICA PHONE: (503) 288-1519 FAX: (503) 288-1518
BALDOR SUDAMERICA CALLE F, EL CANGREJO CONDOMINIO P.H. CONDADO PLAZA APT. 11D, BELLA VISTA PANAMÁ CITY, REP. DE PANAMÁ PHONE: (507) 265-6041
CHINA SHANGHAI JIAHUA BUSINESS CENTER ROOM NO. A-8421 808 HONG QIAO ROAD SHANGHAI 200030 PHONE: 86-21-64473060 FAX: 86-21-64078620
UNITED STATES
ARIZONA PHOENIX 4211 S 43RD PLACE PHOENIX, AZ 85040 PHONE: 602-470-0407 FAX: 602-470-0464
CALIFORNIA LOS ANGELES 6480 FLOTILLA COMMERCE, CA 90040 PHONE: 323-724-6771 FAX: 323-721-5859
HAYWARD 21056 FORBES STREET HAYWARD, CA 94545 PHONE: 510-785-9900 FAX: 510-785-9910 COLORADO DENVER 2520 W BARBERRY PLACE DENVER, CO 80204 PHONE: 303-623-0127 FAX: 303-595-3772
CONNECTICUT WALLINGFORD 65 SOUTH TURNPIKE ROAD WALLINGFORD, CT 06492 PHONE: 203-269-1354 FAX: 203-269-5485
FLORIDA TAMPA/PUERTO RICO/ VIRGIN ISLANDS 3906 EAST 11TH AVENUE TAMPA, FL 33605 PHONE: 813-248-5078 FAX: 813-247-2984
GEORGIA ATLANTA 62 TECHNOLOGY DR. ALPHARETTA, GA 30005 PHONE: 770-772-7000 FAX: 770-772-7200
ILLINOIS CHICAGO 1601 FRONTENAC ROAD NAPERVILLE, IL 60563 PHONE: 630-848-5100 FAX: 630-848-5110
INDIANA INDIANAPOLIS 5525 W. MINNESOTA STREET INDIANAPOLIS, IN 46241 PHONE: 317-246-5100 FAX: 317-246-5110 800-428-4141
P.O. Box 2400 • Fort Smith, AR 72902-2400 U.S.A.Ph: (479) 646-4711 • Fax (479) 648-5792
International Fax (479) 648-5895www.baldor.com
BALDOR DISTRICT OFFICES
© Baldor Electric CompanyForm 1
Printed in the USA3/05 PROG 50,000
Stock Availability
Custom Capabilities
Mod Express
Grinders
Buffers
Dental/Polishing Lathes Explosion Proof - 1.15 SF
Explosion Proof
Super-E Explosion Proof
Industrial Prime/Standby
Towables & Light Towers
Portable Generators• Baldor maintains the
largest inventory of stock motors, drives, gear products and generators in the industry
• 36 distribution centers in the US and Canada
• Over 6500 items available for immediate shipment
• Industrial portables range from 1,100 to 11,000 watts
• Gasoline, multi-fuel and diesel designs
• Available features include: Focal Vibration System, Auto Idler, Switchless Full Power
• Custom motor lead-time in two weeks on existing designs
• Special electrical and mechanical designs suited to OEM needs
• Ratings from 25KVA to 250KVA
• Available with or without trailer
• Diesel engines• Mobile Light Towers - 6000 watt - (4) 1000 Watt Halide Bulbs
- 30 ft. Mast
• Mod Express performs simple modifications to stock product to allow shipment in 2-3 days
• Modification changes include: mounting, enclosures, shaft, space heaters, drains, seals and weatherproofing
• Diesel Ratings from 20 kW to 2000 KW
• LP and Nat. Gas to 880 kW• Engines include: GM, John
Deere, Detroit, Mitsubishi• Prime Power, Commercial
standby, Peak shaving
• Bench and Tool Grinders• Industrial Quality• Continuous Duty• 6” through 14” wheels• Pedestals and other
accessories available
• Three Phase• 1 Hp thru 60 Hp stock, to
300 Hp custom• Enclosures: TEFC and TENV• Class 1 Group C & D, Class
II Group F & G• U.L. approved cast conduit
box standard• Low voltage
• Cotton wheel buffing• Extra long double shafts• Fractional through 7.5 Hp
• Single and Three Phase• 1/4 Hp thru 300 Hp stock• Class I Group C & D; Class II Group F & G • Foot and Face Mount• Corrosion resistant epoxy
finish• U.L. approved cast conduit
box included
• Can be used for Dental, Jewelry and Lapidary applications
• Single and two speed models
• Three Phase• 2 Hp thru 100 Hp stock• Class I Group C & D only, T3C• Corrosion resistant epoxy finish• U.L. approved cast conduit box
included• Labyrith-type recessed slinger
& XP breather/drain• 230/460 and 575 Volt in stock
Capabilities
Grinders, Buffers and Lathes
H Series Drives
Mini Inverter Drives
Micro Inverter Drives
H2 Drives
Baldor’s MintMT Software
Linear Motors
Motion Control
Servo Drives
DC Servo Motors
AC Servo Motors
• Inverter, Vector Drives and AC Servo versions available
• 230 Volt 3/4 thru 60 Hp• 460 Volt 3/4 thru 1500 Hp• 575 Volt 3/4 thru 1500 Hp• Line Regenerative versions
available• PID Process Control Loop• Washdown Enclosures available
• Peak torques over 1500 lb-in (170 Nm)• Standard or low inertia• Potted stator - superior protection for high voltage and current spikes• Premium 200°C moisture resistant, multi-coated wire• Stainless steel IP67 enclosures
available
• 230 Volt 1/3 thru 5 Hp• 460 Volt 1 thru 7.5 Hp• Simple Potentiometer
or Fully Programmable Operator Display
• Heavy Duty Industrial Ratings
• Dynamic Braking Option• NEMA 1 Enclosures
• Peak torques to 283 lb-in (32 N-m)• High continuous 155°C operating
design• Optimized long life copper-graphite
brushes• Premium 200°C moisture resistant,
multi-coated wire• Variety of feedback devices available
• 115 Volts 1/2 thru 2 Hp• 230 Volts 1/2 thru 2 Hp• Chassis Mount or NEMA 4
Enclosures available• Potentiometer Operator
Control• Start/Stop Command• Auto or Manual restart
• Operate either rotary or linear brushless servo motors• PC or Keypad setup• 115/230/460V models - continuous to 54 amps• Full auto-tuning wizard - current velocity & position• Programmable • Device Net, ProfibusDP, CANopen, Ethernet
• Multi-axis control • Digital and Analog I/O• Available in PCI format or standalone units with USB and serial interfaces• Program via Baldor’s MintMT
(Multi-Tasking), embedded ‘C’ or ActiveX • Device Net, ProfibusDP, CANopen, Ethernet
• Very high acceleration - up to 10 g’s (9.8 m/s2)
• High speeds to 320 in/sec (8 m/s)• High peak forces to 3100 lbs
(13,800 N)• Extremely low backlash, high
stiffness• Positioning to 50 nm
• Inverter, Encloderless Vector, Vector Drive and AC Servo available
• 230 Volt 3/4 thru 60 Hp• 460 Volt 3/4 thru 150 Hp• 575 Volt 3/4 thru 150 Hp• Graphical Operator Display• PID Process Control Loop• Ethernet Connection option
• High speed compiled Basic programming language for motion and machine control
• Multi-tasking capability for motion, I/O, HMI and communication tasks
• Modular programming capability
Drives Motion Control and Linear ProductsGenerators
Explosion Proof Motors
Washdown Duty
Paint-Free Washdown Duty
All-Stainless Washdown Duty
Dirty Duty Washdown
Inverter/Vector Duty Washdown
PMDC Washdown
Super-E Single Phase
Super-E Open Drip Proof
Totally Enclosed Fan Cooled• Three Phase• 1 Hp thru 500 Hp Stock, to
800 Hp custom• Enclosures: TEFC• Foot and Face Mount• Inverter-Ready• Low and medium voltage
including 200V and 575V
• Single and Three Phase• 1/2 Hp thru 20 Hp stock• Enclosures: TEFC and TENV• Base mount, C-Face with or without
base or JM pump shaft• Available with BISSC approval• Standard and Super-E efficiency• IEC Ratings Available
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Labyrinth seals • Standard and Super-E
efficiency• IEC Ratings Available
• Three Phase• 1 Hp thru 300 Hp stock, to
1500 Hp custom• Enclosures: ODTF, OPEN,
OPSB, WPI and WPII• Inverter-Ready• Low and medium voltage
including 200V and 575V
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Labyrinth seals • Standard and Super-E
efficiency• IEC Ratings Available
• Single Phase• 1/4 Hp thru 5 Hp stock, to
15 Hp custom• Enclosures: TEFC and ODP• Foot or face mount
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Weatherproof per IEEE 45
and USCG 259 for below deck use
• Standard efficiency
• 230/460 volts• Inverter Washdown, 1 thru
10 Hp stock• Inverter Paint Free, 1 thru
10 Hp stock• Vector Washdown, 1 thru
10 Hp stock• Enclosure: TENV and TEFC• C-Face with base
• SCR-rated 90 and 180 volt• 1/4 thru 5 Hp in stock• Enclosure: TENV and TEFC• C-Face with foot• Paint Free Washdown in
stock 1/4 thru 1 Hp
Washdown Duty Motors Premium Efficient Super-E® Motors
Super-E Pump Motors
Pump Motors
P-Base Motors
Gears
Subfractional Gearmotors
WPI - WPII
TEFC Above NEMA• Low and Medium Voltage• 250-500 Hp stock to 800 Hp
custom• Severe Duty and IEEE 841
available• Sleeve bearings available• Standard aluminum and
copper bar rotor designs
• Low and Medium Voltage through 600 Hp Stock to 1500 Hp Custom
• Sleeve bearings available• Super-E NEMA Premium®
efficiency available• Standard aluminum and
copper bar rotor designs
• Three Phase• 1 Hp thru 50 Hp stock, to
250 Hp custom• Enclosures: TEFC and ODP• JM, JP and West Coast
Shafts• Inverter-Ready
• Single and Three Phase• 1/4 Hp thru 125 Hp• Enclosures: ODP, OPEN,
OPSB, TENV and XPFC• 56J, JM, JP and West
Coast Shafts
• AC and DC ratings• Right Angle and Parallel
Shaft 1/50 through 1/2 Hp• Enclosures: TENV and
TEFC
• Three Phase• 1/4 Hp thru 75 Hp stocked• Enclosures: OPEN and TEFC• Normal, medium and high thrust designs• Standard and Super Efficiencies
• Single and Double reductions from 5:1 to 3600:1
• Output ratings to 9000 in-lbs.• Right angle, parallel shaft and
ratio multipliers• Optional mounting bases and
accessories• Available in Washdown Duty
and Stainless Washdown Pre-Engineered Panel
Inverter Gearmotors• 230 volt 3/8 Hp inverter
gearmotors• Right angle 490 RPM @
68 in-lb thru 33 RPM @ 315 in-lb
• Parallel shaft 490 RPM @ 58 in-lb thru 82 RPM @ 350 in-lb
• Inverter, Encoderless Vector and Vector Drives available
• Open Panel, NEMA 1 or NEMA 12• Keypad, 2-Wire or 3-Wire control operation• Control Bypass Option• Line Disconnect Option• Line Reactor & Load Reactor Option• Custom Configurations
Super-E Brake Motors
HVAC
Chiller/Cooling Tower
• Three Phase• 1 Hp thru 30 Hp stock• Enclosures: TEFC and TENV• Inverter-Ready brake
connection• NEMA standard BA
dimension• Easily convertible to C-Face
• Single and Three Phase• 1/4 Hp thru 75 Hp• Enclosures: OPAO, TEAO
TEFC and OPEN
• Three Phase• Corrosion Resistant Epoxy Finish• Double sealed Bearings with
Inpro/Seal®• Stainless Steel Nameplate• Corrosion Resistant Hardware• Designed for high humidity
environment• 5 Hp-7 Hp in stock
HVAC Motors
Pump Motors
Large Frame Motors
Gear Products Dirty Duty
Super-E Severe Duty IEEE 841
Super-E Severe Duty• Three Phase• 1 Hp thru 500 Hp stock, to
800 Hp custom• Enclosures: TEFC and TENV• Foot and face mount• Inverter-Ready• Low and medium voltage
including 575V
• Three Phase• 1 Hp thru 250 Hp stock, to
800 Hp custom• Enclosures: TEFC and TENV• Exceeds the IEEE 841-2001
standards for severe duty TEFC induction motors
• InproSeal® on fan & drive end shafts
• Three Phase• 1 Hp thru 20 Hp stock• Enclosures: TEFC and TENV• Foot and face mount• Corrosion-resistant epoxy finish• Washdown Dirty Duty®
Severe Duty Motors
Soft Start• Digital and Solid State Controls• Single Phase Starters• Three Phase Starters• Three Phase Torque Controls• Three Phase Electronic Brake• 115, 230, 460 & 575 Volt units• Ratings of 1/4 thru 800 Hp • Control & Combination Starters
• Usable as Input Line Reactors and Output Load Reactors
• Stock ratings for 3% Impedance• 60 Hz ratings of 208/230, 460
and 575 Volts• 50 Hz ratings of 208/240 and
380/400/415 Volts• Optional NEMA 1 Enclosures
Three Phase AC Reactors
������
� � � � ��
Stock Availability
Custom Capabilities
Mod Express
Grinders
Buffers
Dental/Polishing Lathes Explosion Proof - 1.15 SF
Explosion Proof
Super-E Explosion Proof
Industrial Prime/Standby
Towables & Light Towers
Portable Generators• Baldor maintains the
largest inventory of stock motors, drives, gear products and generators in the industry
• 36 distribution centers in the US and Canada
• Over 6500 items available for immediate shipment
• Industrial portables range from 1,100 to 11,000 watts
• Gasoline, multi-fuel and diesel designs
• Available features include: Focal Vibration System, Auto Idler, Switchless Full Power
• Custom motor lead-time in two weeks on existing designs
• Special electrical and mechanical designs suited to OEM needs
• Ratings from 25KVA to 250KVA
• Available with or without trailer
• Diesel engines• Mobile Light Towers - 6000 watt - (4) 1000 Watt Halide Bulbs
- 30 ft. Mast
• Mod Express performs simple modifications to stock product to allow shipment in 2-3 days
• Modification changes include: mounting, enclosures, shaft, space heaters, drains, seals and weatherproofing
• Diesel Ratings from 20 kW to 2000 KW
• LP and Nat. Gas to 880 kW• Engines include: GM, John
Deere, Detroit, Mitsubishi• Prime Power, Commercial
standby, Peak shaving
• Bench and Tool Grinders• Industrial Quality• Continuous Duty• 6” through 14” wheels• Pedestals and other
accessories available
• Three Phase• 1 Hp thru 60 Hp stock, to
300 Hp custom• Enclosures: TEFC and TENV• Class 1 Group C & D, Class
II Group F & G• U.L. approved cast conduit
box standard• Low voltage
• Cotton wheel buffing• Extra long double shafts• Fractional through 7.5 Hp
• Single and Three Phase• 1/4 Hp thru 300 Hp stock• Class I Group C & D; Class II Group F & G • Foot and Face Mount• Corrosion resistant epoxy
finish• U.L. approved cast conduit
box included
• Can be used for Dental, Jewelry and Lapidary applications
• Single and two speed models
• Three Phase• 2 Hp thru 100 Hp stock• Class I Group C & D only, T3C• Corrosion resistant epoxy finish• U.L. approved cast conduit box
included• Labyrith-type recessed slinger
& XP breather/drain• 230/460 and 575 Volt in stock
Capabilities
Grinders, Buffers and Lathes
H Series Drives
Mini Inverter Drives
Micro Inverter Drives
H2 Drives
Baldor’s MintMT Software
Linear Motors
Motion Control
Servo Drives
DC Servo Motors
AC Servo Motors
• Inverter, Vector Drives and AC Servo versions available
• 230 Volt 3/4 thru 60 Hp• 460 Volt 3/4 thru 1500 Hp• 575 Volt 3/4 thru 1500 Hp• Line Regenerative versions
available• PID Process Control Loop• Washdown Enclosures available
• Peak torques over 1500 lb-in (170 Nm)• Standard or low inertia• Potted stator - superior protection for high voltage and current spikes• Premium 200°C moisture resistant, multi-coated wire• Stainless steel IP67 enclosures
available
• 230 Volt 1/3 thru 5 Hp• 460 Volt 1 thru 7.5 Hp• Simple Potentiometer
or Fully Programmable Operator Display
• Heavy Duty Industrial Ratings
• Dynamic Braking Option• NEMA 1 Enclosures
• Peak torques to 283 lb-in (32 N-m)• High continuous 155°C operating
design• Optimized long life copper-graphite
brushes• Premium 200°C moisture resistant,
multi-coated wire• Variety of feedback devices available
• 115 Volts 1/2 thru 2 Hp• 230 Volts 1/2 thru 2 Hp• Chassis Mount or NEMA 4
Enclosures available• Potentiometer Operator
Control• Start/Stop Command• Auto or Manual restart
• Operate either rotary or linear brushless servo motors• PC or Keypad setup• 115/230/460V models - continuous to 54 amps• Full auto-tuning wizard - current velocity & position• Programmable • Device Net, ProfibusDP, CANopen, Ethernet
• Multi-axis control • Digital and Analog I/O• Available in PCI format or standalone units with USB and serial interfaces• Program via Baldor’s MintMT
(Multi-Tasking), embedded ‘C’ or ActiveX • Device Net, ProfibusDP, CANopen, Ethernet
• Very high acceleration - up to 10 g’s (9.8 m/s2)
• High speeds to 320 in/sec (8 m/s)• High peak forces to 3100 lbs
(13,800 N)• Extremely low backlash, high
stiffness• Positioning to 50 nm
• Inverter, Encloderless Vector, Vector Drive and AC Servo available
• 230 Volt 3/4 thru 60 Hp• 460 Volt 3/4 thru 150 Hp• 575 Volt 3/4 thru 150 Hp• Graphical Operator Display• PID Process Control Loop• Ethernet Connection option
• High speed compiled Basic programming language for motion and machine control
• Multi-tasking capability for motion, I/O, HMI and communication tasks
• Modular programming capability
Drives Motion Control and Linear ProductsGenerators
Explosion Proof Motors
Washdown Duty
Paint-Free Washdown Duty
All-Stainless Washdown Duty
Dirty Duty Washdown
Inverter/Vector Duty Washdown
PMDC Washdown
Super-E Single Phase
Super-E Open Drip Proof
Totally Enclosed Fan Cooled• Three Phase• 1 Hp thru 500 Hp Stock, to
800 Hp custom• Enclosures: TEFC• Foot and Face Mount• Inverter-Ready• Low and medium voltage
including 200V and 575V
• Single and Three Phase• 1/2 Hp thru 20 Hp stock• Enclosures: TEFC and TENV• Base mount, C-Face with or without
base or JM pump shaft• Available with BISSC approval• Standard and Super-E efficiency• IEC Ratings Available
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Labyrinth seals • Standard and Super-E
efficiency• IEC Ratings Available
• Three Phase• 1 Hp thru 300 Hp stock, to
1500 Hp custom• Enclosures: ODTF, OPEN,
OPSB, WPI and WPII• Inverter-Ready• Low and medium voltage
including 200V and 575V
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Labyrinth seals • Standard and Super-E
efficiency• IEC Ratings Available
• Single Phase• 1/4 Hp thru 5 Hp stock, to
15 Hp custom• Enclosures: TEFC and ODP• Foot or face mount
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Weatherproof per IEEE 45
and USCG 259 for below deck use
• Standard efficiency
• 230/460 volts• Inverter Washdown, 1 thru
10 Hp stock• Inverter Paint Free, 1 thru
10 Hp stock• Vector Washdown, 1 thru
10 Hp stock• Enclosure: TENV and TEFC• C-Face with base
• SCR-rated 90 and 180 volt• 1/4 thru 5 Hp in stock• Enclosure: TENV and TEFC• C-Face with foot• Paint Free Washdown in
stock 1/4 thru 1 Hp
Washdown Duty Motors Premium Efficient Super-E® Motors
Super-E Pump Motors
Pump Motors
P-Base Motors
Gears
Subfractional Gearmotors
WPI - WPII
TEFC Above NEMA• Low and Medium Voltage• 250-500 Hp stock to 800 Hp
custom• Severe Duty and IEEE 841
available• Sleeve bearings available• Standard aluminum and
copper bar rotor designs
• Low and Medium Voltage through 600 Hp Stock to 1500 Hp Custom
• Sleeve bearings available• Super-E NEMA Premium®
efficiency available• Standard aluminum and
copper bar rotor designs
• Three Phase• 1 Hp thru 50 Hp stock, to
250 Hp custom• Enclosures: TEFC and ODP• JM, JP and West Coast
Shafts• Inverter-Ready
• Single and Three Phase• 1/4 Hp thru 125 Hp• Enclosures: ODP, OPEN,
OPSB, TENV and XPFC• 56J, JM, JP and West
Coast Shafts
• AC and DC ratings• Right Angle and Parallel
Shaft 1/50 through 1/2 Hp• Enclosures: TENV and
TEFC
• Three Phase• 1/4 Hp thru 75 Hp stocked• Enclosures: OPEN and TEFC• Normal, medium and high thrust designs• Standard and Super Efficiencies
• Single and Double reductions from 5:1 to 3600:1
• Output ratings to 9000 in-lbs.• Right angle, parallel shaft and
ratio multipliers• Optional mounting bases and
accessories• Available in Washdown Duty
and Stainless Washdown Pre-Engineered Panel
Inverter Gearmotors• 230 volt 3/8 Hp inverter
gearmotors• Right angle 490 RPM @
68 in-lb thru 33 RPM @ 315 in-lb
• Parallel shaft 490 RPM @ 58 in-lb thru 82 RPM @ 350 in-lb
• Inverter, Encoderless Vector and Vector Drives available
• Open Panel, NEMA 1 or NEMA 12• Keypad, 2-Wire or 3-Wire control operation• Control Bypass Option• Line Disconnect Option• Line Reactor & Load Reactor Option• Custom Configurations
Super-E Brake Motors
HVAC
Chiller/Cooling Tower
• Three Phase• 1 Hp thru 30 Hp stock• Enclosures: TEFC and TENV• Inverter-Ready brake
connection• NEMA standard BA
dimension• Easily convertible to C-Face
• Single and Three Phase• 1/4 Hp thru 75 Hp• Enclosures: OPAO, TEAO
TEFC and OPEN
• Three Phase• Corrosion Resistant Epoxy Finish• Double sealed Bearings with
Inpro/Seal®• Stainless Steel Nameplate• Corrosion Resistant Hardware• Designed for high humidity
environment• 5 Hp-7 Hp in stock
HVAC Motors
Pump Motors
Large Frame Motors
Gear Products Dirty Duty
Super-E Severe Duty IEEE 841
Super-E Severe Duty• Three Phase• 1 Hp thru 500 Hp stock, to
800 Hp custom• Enclosures: TEFC and TENV• Foot and face mount• Inverter-Ready• Low and medium voltage
including 575V
• Three Phase• 1 Hp thru 250 Hp stock, to
800 Hp custom• Enclosures: TEFC and TENV• Exceeds the IEEE 841-2001
standards for severe duty TEFC induction motors
• InproSeal® on fan & drive end shafts
• Three Phase• 1 Hp thru 20 Hp stock• Enclosures: TEFC and TENV• Foot and face mount• Corrosion-resistant epoxy finish• Washdown Dirty Duty®
Severe Duty Motors
Soft Start• Digital and Solid State Controls• Single Phase Starters• Three Phase Starters• Three Phase Torque Controls• Three Phase Electronic Brake• 115, 230, 460 & 575 Volt units• Ratings of 1/4 thru 800 Hp • Control & Combination Starters
• Usable as Input Line Reactors and Output Load Reactors
• Stock ratings for 3% Impedance• 60 Hz ratings of 208/230, 460
and 575 Volts• 50 Hz ratings of 208/240 and
380/400/415 Volts• Optional NEMA 1 Enclosures
Three Phase AC Reactors
������
� � � � ��
Stock Availability
Custom Capabilities
Mod Express
Grinders
Buffers
Dental/Polishing Lathes Explosion Proof - 1.15 SF
Explosion Proof
Super-E Explosion Proof
Industrial Prime/Standby
Towables & Light Towers
Portable Generators• Baldor maintains the
largest inventory of stock motors, drives, gear products and generators in the industry
• 36 distribution centers in the US and Canada
• Over 6500 items available for immediate shipment
• Industrial portables range from 1,100 to 11,000 watts
• Gasoline, multi-fuel and diesel designs
• Available features include: Focal Vibration System, Auto Idler, Switchless Full Power
• Custom motor lead-time in two weeks on existing designs
• Special electrical and mechanical designs suited to OEM needs
• Ratings from 25KVA to 250KVA
• Available with or without trailer
• Diesel engines• Mobile Light Towers - 6000 watt - (4) 1000 Watt Halide Bulbs
- 30 ft. Mast
• Mod Express performs simple modifications to stock product to allow shipment in 2-3 days
• Modification changes include: mounting, enclosures, shaft, space heaters, drains, seals and weatherproofing
• Diesel Ratings from 20 kW to 2000 KW
• LP and Nat. Gas to 880 kW• Engines include: GM, John
Deere, Detroit, Mitsubishi• Prime Power, Commercial
standby, Peak shaving
• Bench and Tool Grinders• Industrial Quality• Continuous Duty• 6” through 14” wheels• Pedestals and other
accessories available
• Three Phase• 1 Hp thru 60 Hp stock, to
300 Hp custom• Enclosures: TEFC and TENV• Class 1 Group C & D, Class
II Group F & G• U.L. approved cast conduit
box standard• Low voltage
• Cotton wheel buffing• Extra long double shafts• Fractional through 7.5 Hp
• Single and Three Phase• 1/4 Hp thru 300 Hp stock• Class I Group C & D; Class II Group F & G • Foot and Face Mount• Corrosion resistant epoxy
finish• U.L. approved cast conduit
box included
• Can be used for Dental, Jewelry and Lapidary applications
• Single and two speed models
• Three Phase• 2 Hp thru 100 Hp stock• Class I Group C & D only, T3C• Corrosion resistant epoxy finish• U.L. approved cast conduit box
included• Labyrith-type recessed slinger
& XP breather/drain• 230/460 and 575 Volt in stock
Capabilities
Grinders, Buffers and Lathes
H Series Drives
Mini Inverter Drives
Micro Inverter Drives
H2 Drives
Baldor’s MintMT Software
Linear Motors
Motion Control
Servo Drives
DC Servo Motors
AC Servo Motors
• Inverter, Vector Drives and AC Servo versions available
• 230 Volt 3/4 thru 60 Hp• 460 Volt 3/4 thru 1500 Hp• 575 Volt 3/4 thru 1500 Hp• Line Regenerative versions
available• PID Process Control Loop• Washdown Enclosures available
• Peak torques over 1500 lb-in (170 Nm)• Standard or low inertia• Potted stator - superior protection for high voltage and current spikes• Premium 200°C moisture resistant, multi-coated wire• Stainless steel IP67 enclosures
available
• 230 Volt 1/3 thru 5 Hp• 460 Volt 1 thru 7.5 Hp• Simple Potentiometer
or Fully Programmable Operator Display
• Heavy Duty Industrial Ratings
• Dynamic Braking Option• NEMA 1 Enclosures
• Peak torques to 283 lb-in (32 N-m)• High continuous 155°C operating
design• Optimized long life copper-graphite
brushes• Premium 200°C moisture resistant,
multi-coated wire• Variety of feedback devices available
• 115 Volts 1/2 thru 2 Hp• 230 Volts 1/2 thru 2 Hp• Chassis Mount or NEMA 4
Enclosures available• Potentiometer Operator
Control• Start/Stop Command• Auto or Manual restart
• Operate either rotary or linear brushless servo motors• PC or Keypad setup• 115/230/460V models - continuous to 54 amps• Full auto-tuning wizard - current velocity & position• Programmable • Device Net, ProfibusDP, CANopen, Ethernet
• Multi-axis control • Digital and Analog I/O• Available in PCI format or standalone units with USB and serial interfaces• Program via Baldor’s MintMT
(Multi-Tasking), embedded ‘C’ or ActiveX • Device Net, ProfibusDP, CANopen, Ethernet
• Very high acceleration - up to 10 g’s (9.8 m/s2)
• High speeds to 320 in/sec (8 m/s)• High peak forces to 3100 lbs
(13,800 N)• Extremely low backlash, high
stiffness• Positioning to 50 nm
• Inverter, Encloderless Vector, Vector Drive and AC Servo available
• 230 Volt 3/4 thru 60 Hp• 460 Volt 3/4 thru 150 Hp• 575 Volt 3/4 thru 150 Hp• Graphical Operator Display• PID Process Control Loop• Ethernet Connection option
• High speed compiled Basic programming language for motion and machine control
• Multi-tasking capability for motion, I/O, HMI and communication tasks
• Modular programming capability
Drives Motion Control and Linear ProductsGenerators
Explosion Proof Motors
Washdown Duty
Paint-Free Washdown Duty
All-Stainless Washdown Duty
Dirty Duty Washdown
Inverter/Vector Duty Washdown
PMDC Washdown
Super-E Single Phase
Super-E Open Drip Proof
Totally Enclosed Fan Cooled• Three Phase• 1 Hp thru 500 Hp Stock, to
800 Hp custom• Enclosures: TEFC• Foot and Face Mount• Inverter-Ready• Low and medium voltage
including 200V and 575V
• Single and Three Phase• 1/2 Hp thru 20 Hp stock• Enclosures: TEFC and TENV• Base mount, C-Face with or without
base or JM pump shaft• Available with BISSC approval• Standard and Super-E efficiency• IEC Ratings Available
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Labyrinth seals • Standard and Super-E
efficiency• IEC Ratings Available
• Three Phase• 1 Hp thru 300 Hp stock, to
1500 Hp custom• Enclosures: ODTF, OPEN,
OPSB, WPI and WPII• Inverter-Ready• Low and medium voltage
including 200V and 575V
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Labyrinth seals • Standard and Super-E
efficiency• IEC Ratings Available
• Single Phase• 1/4 Hp thru 5 Hp stock, to
15 Hp custom• Enclosures: TEFC and ODP• Foot or face mount
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Weatherproof per IEEE 45
and USCG 259 for below deck use
• Standard efficiency
• 230/460 volts• Inverter Washdown, 1 thru
10 Hp stock• Inverter Paint Free, 1 thru
10 Hp stock• Vector Washdown, 1 thru
10 Hp stock• Enclosure: TENV and TEFC• C-Face with base
• SCR-rated 90 and 180 volt• 1/4 thru 5 Hp in stock• Enclosure: TENV and TEFC• C-Face with foot• Paint Free Washdown in
stock 1/4 thru 1 Hp
Washdown Duty Motors Premium Efficient Super-E® Motors
Super-E Pump Motors
Pump Motors
P-Base Motors
Gears
Subfractional Gearmotors
WPI - WPII
TEFC Above NEMA• Low and Medium Voltage• 250-500 Hp stock to 800 Hp
custom• Severe Duty and IEEE 841
available• Sleeve bearings available• Standard aluminum and
copper bar rotor designs
• Low and Medium Voltage through 600 Hp Stock to 1500 Hp Custom
• Sleeve bearings available• Super-E NEMA Premium®
efficiency available• Standard aluminum and
copper bar rotor designs
• Three Phase• 1 Hp thru 50 Hp stock, to
250 Hp custom• Enclosures: TEFC and ODP• JM, JP and West Coast
Shafts• Inverter-Ready
• Single and Three Phase• 1/4 Hp thru 125 Hp• Enclosures: ODP, OPEN,
OPSB, TENV and XPFC• 56J, JM, JP and West
Coast Shafts
• AC and DC ratings• Right Angle and Parallel
Shaft 1/50 through 1/2 Hp• Enclosures: TENV and
TEFC
• Three Phase• 1/4 Hp thru 75 Hp stocked• Enclosures: OPEN and TEFC• Normal, medium and high thrust designs• Standard and Super Efficiencies
• Single and Double reductions from 5:1 to 3600:1
• Output ratings to 9000 in-lbs.• Right angle, parallel shaft and
ratio multipliers• Optional mounting bases and
accessories• Available in Washdown Duty
and Stainless Washdown Pre-Engineered Panel
Inverter Gearmotors• 230 volt 3/8 Hp inverter
gearmotors• Right angle 490 RPM @
68 in-lb thru 33 RPM @ 315 in-lb
• Parallel shaft 490 RPM @ 58 in-lb thru 82 RPM @ 350 in-lb
• Inverter, Encoderless Vector and Vector Drives available
• Open Panel, NEMA 1 or NEMA 12• Keypad, 2-Wire or 3-Wire control operation• Control Bypass Option• Line Disconnect Option• Line Reactor & Load Reactor Option• Custom Configurations
Super-E Brake Motors
HVAC
Chiller/Cooling Tower
• Three Phase• 1 Hp thru 30 Hp stock• Enclosures: TEFC and TENV• Inverter-Ready brake
connection• NEMA standard BA
dimension• Easily convertible to C-Face
• Single and Three Phase• 1/4 Hp thru 75 Hp• Enclosures: OPAO, TEAO
TEFC and OPEN
• Three Phase• Corrosion Resistant Epoxy Finish• Double sealed Bearings with
Inpro/Seal®• Stainless Steel Nameplate• Corrosion Resistant Hardware• Designed for high humidity
environment• 5 Hp-7 Hp in stock
HVAC Motors
Pump Motors
Large Frame Motors
Gear Products Dirty Duty
Super-E Severe Duty IEEE 841
Super-E Severe Duty• Three Phase• 1 Hp thru 500 Hp stock, to
800 Hp custom• Enclosures: TEFC and TENV• Foot and face mount• Inverter-Ready• Low and medium voltage
including 575V
• Three Phase• 1 Hp thru 250 Hp stock, to
800 Hp custom• Enclosures: TEFC and TENV• Exceeds the IEEE 841-2001
standards for severe duty TEFC induction motors
• InproSeal® on fan & drive end shafts
• Three Phase• 1 Hp thru 20 Hp stock• Enclosures: TEFC and TENV• Foot and face mount• Corrosion-resistant epoxy finish• Washdown Dirty Duty®
Severe Duty Motors
Soft Start• Digital and Solid State Controls• Single Phase Starters• Three Phase Starters• Three Phase Torque Controls• Three Phase Electronic Brake• 115, 230, 460 & 575 Volt units• Ratings of 1/4 thru 800 Hp • Control & Combination Starters
• Usable as Input Line Reactors and Output Load Reactors
• Stock ratings for 3% Impedance• 60 Hz ratings of 208/230, 460
and 575 Volts• 50 Hz ratings of 208/240 and
380/400/415 Volts• Optional NEMA 1 Enclosures
Three Phase AC Reactors
������
� � � � ��
Stock Availability
Custom Capabilities
Mod Express
Grinders
Buffers
Dental/Polishing Lathes Explosion Proof - 1.15 SF
Explosion Proof
Super-E Explosion Proof
Industrial Prime/Standby
Towables & Light Towers
Portable Generators• Baldor maintains the
largest inventory of stock motors, drives, gear products and generators in the industry
• 36 distribution centers in the US and Canada
• Over 6500 items available for immediate shipment
• Industrial portables range from 1,100 to 11,000 watts
• Gasoline, multi-fuel and diesel designs
• Available features include: Focal Vibration System, Auto Idler, Switchless Full Power
• Custom motor lead-time in two weeks on existing designs
• Special electrical and mechanical designs suited to OEM needs
• Ratings from 25KVA to 250KVA
• Available with or without trailer
• Diesel engines• Mobile Light Towers - 6000 watt - (4) 1000 Watt Halide Bulbs
- 30 ft. Mast
• Mod Express performs simple modifications to stock product to allow shipment in 2-3 days
• Modification changes include: mounting, enclosures, shaft, space heaters, drains, seals and weatherproofing
• Diesel Ratings from 20 kW to 2000 KW
• LP and Nat. Gas to 880 kW• Engines include: GM, John
Deere, Detroit, Mitsubishi• Prime Power, Commercial
standby, Peak shaving
• Bench and Tool Grinders• Industrial Quality• Continuous Duty• 6” through 14” wheels• Pedestals and other
accessories available
• Three Phase• 1 Hp thru 60 Hp stock, to
300 Hp custom• Enclosures: TEFC and TENV• Class 1 Group C & D, Class
II Group F & G• U.L. approved cast conduit
box standard• Low voltage
• Cotton wheel buffing• Extra long double shafts• Fractional through 7.5 Hp
• Single and Three Phase• 1/4 Hp thru 300 Hp stock• Class I Group C & D; Class II Group F & G • Foot and Face Mount• Corrosion resistant epoxy
finish• U.L. approved cast conduit
box included
• Can be used for Dental, Jewelry and Lapidary applications
• Single and two speed models
• Three Phase• 2 Hp thru 100 Hp stock• Class I Group C & D only, T3C• Corrosion resistant epoxy finish• U.L. approved cast conduit box
included• Labyrith-type recessed slinger
& XP breather/drain• 230/460 and 575 Volt in stock
Capabilities
Grinders, Buffers and Lathes
H Series Drives
Mini Inverter Drives
Micro Inverter Drives
H2 Drives
Baldor’s MintMT Software
Linear Motors
Motion Control
Servo Drives
DC Servo Motors
AC Servo Motors
• Inverter, Vector Drives and AC Servo versions available
• 230 Volt 3/4 thru 60 Hp• 460 Volt 3/4 thru 1500 Hp• 575 Volt 3/4 thru 1500 Hp• Line Regenerative versions
available• PID Process Control Loop• Washdown Enclosures available
• Peak torques over 1500 lb-in (170 Nm)• Standard or low inertia• Potted stator - superior protection for high voltage and current spikes• Premium 200°C moisture resistant, multi-coated wire• Stainless steel IP67 enclosures
available
• 230 Volt 1/3 thru 5 Hp• 460 Volt 1 thru 7.5 Hp• Simple Potentiometer
or Fully Programmable Operator Display
• Heavy Duty Industrial Ratings
• Dynamic Braking Option• NEMA 1 Enclosures
• Peak torques to 283 lb-in (32 N-m)• High continuous 155°C operating
design• Optimized long life copper-graphite
brushes• Premium 200°C moisture resistant,
multi-coated wire• Variety of feedback devices available
• 115 Volts 1/2 thru 2 Hp• 230 Volts 1/2 thru 2 Hp• Chassis Mount or NEMA 4
Enclosures available• Potentiometer Operator
Control• Start/Stop Command• Auto or Manual restart
• Operate either rotary or linear brushless servo motors• PC or Keypad setup• 115/230/460V models - continuous to 54 amps• Full auto-tuning wizard - current velocity & position• Programmable • Device Net, ProfibusDP, CANopen, Ethernet
• Multi-axis control • Digital and Analog I/O• Available in PCI format or standalone units with USB and serial interfaces• Program via Baldor’s MintMT
(Multi-Tasking), embedded ‘C’ or ActiveX • Device Net, ProfibusDP, CANopen, Ethernet
• Very high acceleration - up to 10 g’s (9.8 m/s2)
• High speeds to 320 in/sec (8 m/s)• High peak forces to 3100 lbs
(13,800 N)• Extremely low backlash, high
stiffness• Positioning to 50 nm
• Inverter, Encloderless Vector, Vector Drive and AC Servo available
• 230 Volt 3/4 thru 60 Hp• 460 Volt 3/4 thru 150 Hp• 575 Volt 3/4 thru 150 Hp• Graphical Operator Display• PID Process Control Loop• Ethernet Connection option
• High speed compiled Basic programming language for motion and machine control
• Multi-tasking capability for motion, I/O, HMI and communication tasks
• Modular programming capability
Drives Motion Control and Linear ProductsGenerators
Explosion Proof Motors
Washdown Duty
Paint-Free Washdown Duty
All-Stainless Washdown Duty
Dirty Duty Washdown
Inverter/Vector Duty Washdown
PMDC Washdown
Super-E Single Phase
Super-E Open Drip Proof
Totally Enclosed Fan Cooled• Three Phase• 1 Hp thru 500 Hp Stock, to
800 Hp custom• Enclosures: TEFC• Foot and Face Mount• Inverter-Ready• Low and medium voltage
including 200V and 575V
• Single and Three Phase• 1/2 Hp thru 20 Hp stock• Enclosures: TEFC and TENV• Base mount, C-Face with or without
base or JM pump shaft• Available with BISSC approval• Standard and Super-E efficiency• IEC Ratings Available
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Labyrinth seals • Standard and Super-E
efficiency• IEC Ratings Available
• Three Phase• 1 Hp thru 300 Hp stock, to
1500 Hp custom• Enclosures: ODTF, OPEN,
OPSB, WPI and WPII• Inverter-Ready• Low and medium voltage
including 200V and 575V
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Labyrinth seals • Standard and Super-E
efficiency• IEC Ratings Available
• Single Phase• 1/4 Hp thru 5 Hp stock, to
15 Hp custom• Enclosures: TEFC and ODP• Foot or face mount
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Weatherproof per IEEE 45
and USCG 259 for below deck use
• Standard efficiency
• 230/460 volts• Inverter Washdown, 1 thru
10 Hp stock• Inverter Paint Free, 1 thru
10 Hp stock• Vector Washdown, 1 thru
10 Hp stock• Enclosure: TENV and TEFC• C-Face with base
• SCR-rated 90 and 180 volt• 1/4 thru 5 Hp in stock• Enclosure: TENV and TEFC• C-Face with foot• Paint Free Washdown in
stock 1/4 thru 1 Hp
Washdown Duty Motors Premium Efficient Super-E® Motors
Super-E Pump Motors
Pump Motors
P-Base Motors
Gears
Subfractional Gearmotors
WPI - WPII
TEFC Above NEMA• Low and Medium Voltage• 250-500 Hp stock to 800 Hp
custom• Severe Duty and IEEE 841
available• Sleeve bearings available• Standard aluminum and
copper bar rotor designs
• Low and Medium Voltage through 600 Hp Stock to 1500 Hp Custom
• Sleeve bearings available• Super-E NEMA Premium®
efficiency available• Standard aluminum and
copper bar rotor designs
• Three Phase• 1 Hp thru 50 Hp stock, to
250 Hp custom• Enclosures: TEFC and ODP• JM, JP and West Coast
Shafts• Inverter-Ready
• Single and Three Phase• 1/4 Hp thru 125 Hp• Enclosures: ODP, OPEN,
OPSB, TENV and XPFC• 56J, JM, JP and West
Coast Shafts
• AC and DC ratings• Right Angle and Parallel
Shaft 1/50 through 1/2 Hp• Enclosures: TENV and
TEFC
• Three Phase• 1/4 Hp thru 75 Hp stocked• Enclosures: OPEN and TEFC• Normal, medium and high thrust designs• Standard and Super Efficiencies
• Single and Double reductions from 5:1 to 3600:1
• Output ratings to 9000 in-lbs.• Right angle, parallel shaft and
ratio multipliers• Optional mounting bases and
accessories• Available in Washdown Duty
and Stainless Washdown Pre-Engineered Panel
Inverter Gearmotors• 230 volt 3/8 Hp inverter
gearmotors• Right angle 490 RPM @
68 in-lb thru 33 RPM @ 315 in-lb
• Parallel shaft 490 RPM @ 58 in-lb thru 82 RPM @ 350 in-lb
• Inverter, Encoderless Vector and Vector Drives available
• Open Panel, NEMA 1 or NEMA 12• Keypad, 2-Wire or 3-Wire control operation• Control Bypass Option• Line Disconnect Option• Line Reactor & Load Reactor Option• Custom Configurations
Super-E Brake Motors
HVAC
Chiller/Cooling Tower
• Three Phase• 1 Hp thru 30 Hp stock• Enclosures: TEFC and TENV• Inverter-Ready brake
connection• NEMA standard BA
dimension• Easily convertible to C-Face
• Single and Three Phase• 1/4 Hp thru 75 Hp• Enclosures: OPAO, TEAO
TEFC and OPEN
• Three Phase• Corrosion Resistant Epoxy Finish• Double sealed Bearings with
Inpro/Seal®• Stainless Steel Nameplate• Corrosion Resistant Hardware• Designed for high humidity
environment• 5 Hp-7 Hp in stock
HVAC Motors
Pump Motors
Large Frame Motors
Gear Products Dirty Duty
Super-E Severe Duty IEEE 841
Super-E Severe Duty• Three Phase• 1 Hp thru 500 Hp stock, to
800 Hp custom• Enclosures: TEFC and TENV• Foot and face mount• Inverter-Ready• Low and medium voltage
including 575V
• Three Phase• 1 Hp thru 250 Hp stock, to
800 Hp custom• Enclosures: TEFC and TENV• Exceeds the IEEE 841-2001
standards for severe duty TEFC induction motors
• InproSeal® on fan & drive end shafts
• Three Phase• 1 Hp thru 20 Hp stock• Enclosures: TEFC and TENV• Foot and face mount• Corrosion-resistant epoxy finish• Washdown Dirty Duty®
Severe Duty Motors
Soft Start• Digital and Solid State Controls• Single Phase Starters• Three Phase Starters• Three Phase Torque Controls• Three Phase Electronic Brake• 115, 230, 460 & 575 Volt units• Ratings of 1/4 thru 800 Hp • Control & Combination Starters
• Usable as Input Line Reactors and Output Load Reactors
• Stock ratings for 3% Impedance• 60 Hz ratings of 208/230, 460
and 575 Volts• 50 Hz ratings of 208/240 and
380/400/415 Volts• Optional NEMA 1 Enclosures
Three Phase AC Reactors
������
� � � � ��
General Purpose TEFC
Single Phase
Two Speed
Woodworking/Arbor Saw
Farm Duty
Commercial Duty SmartMotor
Vector Duty
Inverter Duty
C-Face and D-Flange
50 Hertz
General Purpose ODP• Single and Three Phase• 1/12 Hp thru 600 Hp stock,
to 800 Hp custom• Foot and Face Mount• Enclosures: TEFC and
TENV• Low and medium voltage
including 200V and 575V
• Single and Three Phase• 1/12 Hp thru 600 Hp
stock, to 1500 Hp custom• Foot and Face Mount• Enclosures: ODP, WPI,
WPII• Low and medium voltage
including 200V and 575V
• Single Phase• 1/12 thru 15 Hp stock• Enclosures TEFC, TENV
and ODP• Foot or face mount
• Single and Three Phase• 1/3 thru 60 Hp stock,
custom to 1250 Hp• Enclosures: TEFC, ODP
and Explosion Proof• Foot and face mount• NEMA or IEC Mounting
• Three Phase• 1/12 Hp thru 25 Hp stock,
1000 Hp custom• Enclosures: TEFC, OPEN
and OPSB
• C-Face motors available from stock in most all configurations and product families
• D-Flange motors are available as custom items or through Mod Express
• NEMA or IEC style
• Three Phase• Low Profile• Supplied with keyway and
non threaded shaft• Custom shaft threading thru
Mod Express• Double row ball bearings for
maximum shaft stability• 7-1/2 thru 15 Hp stocked
• 1/3 Hp thru 200 Hp stock, custom to 800 Hp
• Enclosures: TEBC, TENV and TEFC
• Stocked as Washdown, Paint Free, All Stainless and Explosion Proof
• Inverter Gear Motors also available
• Single and Three Phase• 1/3 Hp thru 30 Hp• Foot and Face Mount• Epoxy finish
• 1/3 Hp thru 500 Hp stock, custom to 800 Hp• Enclosures: TEBC and TENV• Stocked with foot and face
mount to 256TC frame• Includes mounted 1024 PPR op-
tical encoder and Milspec-style connector
• 1-10 Hp Washdown duty stocked
• Single and Three Phase• 1/4 Hp thru 3 Hp• Enclosures: ODP and
TEAO• Foot and Face Mount
• 230 or 460 volts• 1 thru 10 Hp stock• TEFC Enclosure: • C-Face with base• Optional 32 character
operator keypad and cable
F2 Mount
Quarry/ Crusher Duty
Automotive Duty
Brake Motors
Design D Oil Field Pump
IEC Frame Metric DC Drive
Tachometers/Feedback Devices
• Enclosures: TEFC and ODP• 1 Hp thru 60 Hp stocked• Super-E Cast Iron TEFC 15
Hp thru 30 Hp in stock• F2 mount on other sizes
available through Mod Express
• Three Phase• 1 thru 15 Hp Quarry Duty
Design C in stock• 100 thru 300 Hp Crusher
Duty stocked with roller bearing for heavy belted loads
• TEFC, U-Frame• 1/4 Hp thru 100 Hp• Epoxy Finish• GM7EQ Approved• High Efficiency• Low Noise Levels
• Single and Three Phase• 1/4 Hp thru 30 Hp stock,
larger available as custom• Standard and Super Efficient• Enclosures: ODP, TEFC,
TENV and Explosion Proof• Foot and Face Mount• Washdown Super-E 1/2 thru 5 Hp
• Three Phase• 2 thru 150 Hp stock• Enclosure: TEFC and ODP• 230/460/796 12-lead or
460/796 6-lead • High slip Design D winding
• 50 or 100 volt/1000 RPM DC tachs available in choice of: PY flange or base mount,
• XC42 or 46 foot and face • 8.5” rabbet pancake style AC or
DC output• PY flange encoder• Hollow shaft encoders and pulse
generators
• Three Phase• 18 thru 30 kW stock, 1100
kW custom• Enclosures: TEFC• F2 mounted Conduit box• B3 foot, B5 flange or B14
face mount• 50 or 60 Hz
• DC SCR Drive• 230 Volt 5 thru 300 Hp• 460 Volt 5 thru 600 Hp• 240 or 500 Armature Volts• DC Motor Field Supply• One Way or Line Regenerative• Armature or Motor Feedback• 115 Volt 1/100 thru 2 Hp
Baldor’s mission is “to be the best (as determined by our customers) marketers, designers and manufacturers…”
Motors
Lifting Magnet Generators
Low Voltage and DC Power
Wound Field DC
Permanent Magnet DC• SCR-rated 90 or 180 volt• 1/50-5 Hp stocked• Enclosures: TENV and TEFC• C-Face with base• Tach Adaptable• Explosion proof in stock 1/4
thru 1.5 Hp• Integral tach in stock 1/4 thru 5 Hp
• SCR-rated 90, 180, 240 or 500 volt• 1/4 thru 500 Hp stocked• Enclosures: TENV, TEFC, DPFG, DPBV, TEUC and TEAO• C-Face with base thru 10 Hp in stock• Tach adaptable• Explosion proof thru 3 Hp in stock
• 12 and 24 volt permanent magnet, 1/4 thru 1 Hp stocked
• 115 and 230 volt com-pound wound power motors stocked 1/3 thru 1.5 Hp, custom to 500 Hp
• Enclosure: TENV and TEFC• Base mounted
• 230 volt, three phase compound wound with drooping voltage characteristic
• 5 thru 40 kW stocked, custom to 100 kW• Heavy steel frame with cast
iron endplates• Choice of foot or foot with face mount
Direct Current Motors and DrivesPRODUCT OVERVIEW
GERMANY DIESELSTRASSE 22 D-85551 KIRCHHEIM MUNICH, GERMANY PHONE: (49) (89) 90508 - 0 FAX: (49) (89) 90508 - 492
INDIA 14, COMMERCE AVENUE MAHAGANESH COLONY PAUD ROAD PUNE - 411 038 MAHARASHTRA, INDIA PHONE: 91 20 25 45 95 31/32 FAX: 91 20 24 55 95 30
ITALY BALDOR ASR AG SUCCURSALE DI MENDRISIO VIA BORROMINI, 20A CH-6850 MENDRISIO SWITZERLAND PHONE: 41 91 640 9952 FAX: 41 91 630 2633
JAPAN DIA BLDG 802, 2-21-1 TSURUYA-CHO, KANAGAWA-KU YOKOHAMA, 221-0835, JAPAN PHONE: 81-45-412-4506 FAX: 81-45-412-4507
KOREA ROOM 210 BUPYEONG INDUSTRIAL COMMERCIAL COOPERATIVE 396-16 CHEONGCHEON 2-DONG, BUPYEONG-GU INCHEON, KOREA, 403-858 PHONE: 82 32 508 3252 FAX: 82 32 508 3253
MÉXICO KM. 2.0 BLVD. AL AEROPUERTO LEÓN 37545, GUANAJUATO, MÉXICO PHONE: 52 477 761 2030 FAX: 52 477 761 2010
MIDDLE EAST & NORTH AFRICA VSE INTERNATIONAL CORP. 3233 NORTH ARLINGTON HEIGHTS SUITE 100W ARLINGTON HEIGHTS, IL 60004 PHONE: 847 590 5547
SINGAPORE 51 KAKI BUKIT ROAD 2 K B WAREHOUSE COMPLEX SINGAPORE 417863 PHONE: (65) 6 744 2572 FAX: (65) 6 747 1708
SWITZERLAND POSTFACH 73 SCHUTZENSTRASSE 59 CH-8245 FEUERTHALEN SWITZERLAND PHONE: (41) (52) 6474700 FAX: (41) (52) 6592394
TAIWAN ROOM R, 2F NO. 124 CHUNG CHENG ROAD SHIHLIN DIST. TAIPEI 11141 PHONE: (886-2) 8866-2991 FAX: (886-2) 2838-2816
UNITED KINGDOM 6 BRISTOL DISTRIBUTION PARK HAWKLEY DRIVE BRISTOL BS32 0BF U.K. PHONE: 44 1454 850000 FAX: 44 1454 859001
NEW YORK AUBURN ONE ELLIS DRIVE AUBURN, NY 13021 PHONE: 315-255-3403 FAX: 315-253-9923
NORTH CAROLINA GREENSBORO 1220 ROTHERWOOD ROAD GREENSBORO, NC 27406 P O BOX 16500 GREENSBORO, NC 27416 PHONE: 336-272-6104 FAX: 336-273-6628
OHIO CINCINNATI 2929 CRESCENTVILLE ROAD WEST CHESTER, OH 45069 PHONE: 513-771-2600 FAX: 513-772-2219
CLEVELAND 8929 FREEWAY DRIVE MACEDONIA, OH 44056 PHONE: 330-468-4777 FAX: 330-468-4778
OKLAHOMA TULSA 2 EAST DAWES BIXBY, OK 74008 PHONE: 918-366-9320 FAX: 918-366-9338
OREGON PORTLAND 20393 SW AVERY COURT TUALATIN, OR 97062 PHONE: 503-691-9010 FAX: 503-691-9012
PENNSYLVANIA PHILADELPHIA 1035 THOMAS BUSCH MEMORIAL HIGHWAY PENNSAUKEN, NJ 08110 PHONE: 856-661-1442 FAX: 856-663-6363
PITTSBURGH 616H BEATTY ROAD MONROEVILLE, PA 15146 PHONE: 412-380-7244 FAX: 412-380-7250
IOWA DES MOINES 1800 DIXON STREET, SUITE C DES MOINES, IA 50316 PHONE: 515-263-6929 FAX: 515-263-6515
MARYLAND BALTIMORE 6660 SANTA BARBARA RD. SUITE 22-24 ELKRIDGE, MD 21075 PHONE: 410-579-2135 FAX: 410-579-2677
MASSACHUSETTS BOSTON 6 PULLMAN STREET WORCESTER, MA 01606 PHONE: 508-854-0708 FAX: 508-854-0291
MICHIGAN DETROIT 33782 STERLING PONDS BLVD. STERLING HEIGHTS, MI 48312 PHONE: 586-978-9800 FAX: 586-978-9969
GRAND RAPIDS 668 3 MILE ROAD NW GRAND RAPIDS, MI 49504 PHONE: 616-785-1784 FAX: 616-785-1788
MINNESOTA MINNEAPOLIS 21080 134TH AVE. NORTH ROGERS, MN 55374 PHONE: 763-428-3633 FAX: 763-428-4551
MISSOURI ST LOUIS 422 INDUSTRIAL DRIVE MARYLAND HEIGHTS, MO 63043 PHONE: 314-298-1800 FAX: 314-298-7660
KANSAS CITY 915 N W PLATTE VALLEY DR RIVERSIDE, MO 64150 PHONE: 816-587-0272 FAX: 816-587-3735
TENNESSEE MEMPHIS 4000 WINCHESTER ROAD MEMPHIS, TN 38118 PHONE: 901-365-2020 FAX: 901-365-3914
TEXAS HOUSTON 4647 PINE TIMBERS SUITE # 135 HOUSTON, TX 77041 PHONE: 713-895-7062 FAX: 713-690-4540
DALLAS 3040 QUEBEC DALLAS, TX 75247 PHONE: 214-634-7271 FAX: 214-634-8874
UTAH SALT LAKE CITY 2230 SOUTH MAIN STREET SALT LAKE CITY, UT 84115 PHONE: 801-832-0127 FAX: 801-832-8911
WISCONSIN MILWAUKEE 2725 SOUTH 163RD STREET NEW BERLIN, WI 53151 PHONE: 262-784-5940 FAX: 262-784-1215
INTERNATIONAL SALES FORT SMITH, AR P.O. BOX 2400 FORT SMITH, AR 72902 PHONE: 479-646-4711 FAX: 479-648-5895
CANADA EDMONTON, ALBERTA 4053-92 STREET EDMONTON, ALBERTA T6E 6R8 PHONE: 780-434-4900 FAX: 780-438-2600
OAKVILLE, ONTARIO 2750 COVENTRY ROAD OAKVILLE, ONTARIO L6H 6R1 PHONE: 905-829-3301 FAX: 905-829-3302
MONTREAL, QUEBEC 1844 WILLIAM STREET MONTREAL, QUEBEC H3J 1R5 PHONE: 514-933-2711 FAX: 514-933-8639
VANCOUVER, BRITISH COLUMBIA 1538 KEBET WAY PORT COQUITLAM, BC V3C 5M5 PHONE 604-421-2822 FAX: 604-421-3113
WINNIPEG, MANITOBA 54 PRINCESS STREET WINNIPEG, MANITOBA R3B 1K2 PHONE: 204-942-5205 FAX: 204-956-4251
AUSTRALIA UNIT 3, 6 STANTON ROAD SEVEN HILLS, NSW 2147, AUSTRALIA PHONE: (61) (2) 9674 5455 FAX: (61) (2) 9674 2495
UNIT 8, 5 KELLETTS ROAD ROWVILLE, VICTORIA, 3178 AUSTRALIA PHONE: (61) (3) 9753 4355 FAX: (61) (3) 9753 4366
BALDOR CENTROAMERICA RESIDENCIAL PINARES DE SUIZA POL. 15 #44, NVA. SAN SALVADOR EL SALVADOR, CENTRO AMERICA PHONE: (503) 288-1519 FAX: (503) 288-1518
BALDOR SUDAMERICA CALLE F, EL CANGREJO CONDOMINIO P.H. CONDADO PLAZA APT. 11D, BELLA VISTA PANAMÁ CITY, REP. DE PANAMÁ PHONE: (507) 265-6041
CHINA SHANGHAI JIAHUA BUSINESS CENTER ROOM NO. A-8421 808 HONG QIAO ROAD SHANGHAI 200030 PHONE: 86-21-64473060 FAX: 86-21-64078620
UNITED STATES
ARIZONA PHOENIX 4211 S 43RD PLACE PHOENIX, AZ 85040 PHONE: 602-470-0407 FAX: 602-470-0464
CALIFORNIA LOS ANGELES 6480 FLOTILLA COMMERCE, CA 90040 PHONE: 323-724-6771 FAX: 323-721-5859
HAYWARD 21056 FORBES STREET HAYWARD, CA 94545 PHONE: 510-785-9900 FAX: 510-785-9910 COLORADO DENVER 2520 W BARBERRY PLACE DENVER, CO 80204 PHONE: 303-623-0127 FAX: 303-595-3772
CONNECTICUT WALLINGFORD 65 SOUTH TURNPIKE ROAD WALLINGFORD, CT 06492 PHONE: 203-269-1354 FAX: 203-269-5485
FLORIDA TAMPA/PUERTO RICO/ VIRGIN ISLANDS 3906 EAST 11TH AVENUE TAMPA, FL 33605 PHONE: 813-248-5078 FAX: 813-247-2984
GEORGIA ATLANTA 62 TECHNOLOGY DR. ALPHARETTA, GA 30005 PHONE: 770-772-7000 FAX: 770-772-7200
ILLINOIS CHICAGO 1601 FRONTENAC ROAD NAPERVILLE, IL 60563 PHONE: 630-848-5100 FAX: 630-848-5110
INDIANA INDIANAPOLIS 5525 W. MINNESOTA STREET INDIANAPOLIS, IN 46241 PHONE: 317-246-5100 FAX: 317-246-5110 800-428-4141
P.O. Box 2400 • Fort Smith, AR 72902-2400 U.S.A.Ph: (479) 646-4711 • Fax (479) 648-5792
International Fax (479) 648-5895www.baldor.com
BALDOR DISTRICT OFFICES
© Baldor Electric CompanyForm 1
Printed in the USA3/05 PROG 50,000