Date post: | 17-Dec-2015 |
Category: |
Documents |
Upload: | marshall-lynch |
View: | 219 times |
Download: | 1 times |
Solar Energy
Content
• USP‘s• Specification• Design• Technical Buildup / Concept• Fastening• Mounting
– Fastening– System Installation
• Packaging and Transport
Solar Energy
USP´s
• Easy to install– Plug & Play– Half weight of a thermo siphon system
• New Design– Perfect integration on the roof– Half height of a thermo siphon system
• Flat-roof and On-roof Mounting System– Same fastening system for both variants
• Optimal Price/Performance Ratio– Lower price at same performance level compared to a thermo siphon
system• Optimized for Full-Truck-Load
– Min. 96 pcs./truck (TSA : 48 pcs./truck ; HP: 38 pcs./truck )
SUNBOX
H = 950 mm
W = 60 kg
THERMOSIFON
H = 1880 mm
W = 120 kg
Solar Energy
Specification
Type SOLMATEOverall Area 2,4 m²Dimension L x W x H 2.184 x 1.100 x 212 mmWeight (empty, excl. fastening) ca. 65 kgVolume 200 LiterInsulation 30 mm PUR foam plateMaximum Temperature 100°CMaximum operating pressure 4 barHeating element Optional (1 1/4“ IG)Connections 2 x Plug inlets ¾”Installation Flat-/ On-RoofGuarantee 5 years
Solar Energy
Optimized Design
Harmonicframe design
Shapely Mounting Foot
PrismaticGlass
Connections don’t preside over
Solar Energy
Technical Buildup
NIRO-pipe
upper frame(aluminum profile)
caps sealed with O-ringslower frame
(aluminum profile)
30 mm PU-plate(Al plated)
Flange plate
3,2 mm glass + frame sealing
30 mm transparent insulation
Solar Energy
Fastening
• Flat roof– 2 pcs. Mounting foot– 4 pcs. Fastening pieces– Fixation direct on frame
• On roof– 4 pcs. Sifting belt 25x1– Fixation direct on frame
Solar Energy
Mounting of Fastening
Important Mounting instructions• SOLMATE has to stand on the ground• Hammer head screws have to be fixed correctly
Hammer head screws M8 (4x)
Washer (4x)
Screw nut M8 (4x)
Mounting foot (2x)
Washer (4x)
Screw nut M8 (4x)
Screw M8x20 (4x)
Fixing Piece (4x)
Solar Energy
Protective Foil
Attention• Please remove the protective foil after filling!
SOLMATE can be damaged without filling!
Solar Energy
Non-return-/safety valve
Mixer
Shower
Cold water pipe
Hot waterpipeBlocking valve
Drain valve
Mounting instruction:To avoid skin injuries (hot water up to 100°C possible) the installation of a mixer is recommended!
System integration / Connections
Solar Energy
Drain valve
non-return-/safety valve
Mixer
Shower
Cold water pipe
Hot waterpipeBlocking valve
System integration / Connections
Solar Energy
Maintenance
Attention• If the SOLMATE will be draining for maintenance,
the SOLMATE have to be covered with a rag! SOLMATE can be damaged without filling!
Solar Energy
Packaging
Upper Carton , white, printed (2- colour printing)
with recessed grips
SOLMATE with Protective Foil
Lower carton, brawnwith recessed grips
Accessories (fastening,valves, screws, etc.)
Solar Energy
Transport – Truck
Concept• Single packing (incl. fastening):
2-part carton (upper carton white printed) with recessed grips• Packaging palette: PE-Foil on the top + stretch foil• Dimension palette : 2.230 x 1.141 x 2.312 mm • VL 8; 12 palette storage positions• 96 pcs./truck
(TSA : 48 pcs./truck ; HP: 33 pcs./truck )• Degree of capacity utilization: 90.12%
Solar Energy
Transport – 40“ HC-Container
Concept• Single packing (incl. fastening):
2-part carton (upper carton white printed) with recessed grips• Packaging palette: PE-Foil on the top + stretch foil• Dimension palette : 2.230 x 1.141 x 2.312 mm • VL 8; 10 palette storage positions• 80 pcs./truck
(TSA : 48 pcs./truck ; HP: 33 pcs./truck )• Degree of capacity utilization: 77,46%