pulsed laser deposition and sputtering JANUARY 24 AND 25, 2013, ICMAB-CSIC, CAMPUS UAB, BELLATERRA HOME PROGRAM ORGANIZERS REGISTRATION VENUE CONTACT WELCOME FLYER Pulsed laser deposition (PLD) and sputtering are common techniques for thin film growth. PLD has become the leading technique for deposition of complex oxides, whereas sputtering is a standard technique for preparation of metal and oxide films, either in research laboratories and industry. Nowadays, these techniques allow fabrication of oxide and metal thin films and heterostructures with atomic quality control. In the Meeting on Pulsed Laser Deposition and Sputtering, 6 tutorials will review the basics of these techniques and will present the new facilities and capabilities of the Thin Films Laboratory at ICMAB. There will be 12 contributed talks on thin film growth by PLD and sputtering (with focus on growth phenomena and influence of deposition conditions). The Meeting will include observation of real experiments of thin film deposition and RHEED analysis. ORGANIZERS Florencio Sánchez and Nico Dix Thin Films Laboratory (ICMAB) With the support of the ICMAB Seminars Committee DEADLINES Deadline for late registration January 17, 2013 WHEN&WHERE Map Sat Ter ading... ICMAB-CSIC 08193, Bellaterra, Spain January 24 and 25, 2013 Add to my calendar
Transcript
pulsed laser deposition and sputteringJANUARY 24 AND 25, 2013, ICMAB-CSIC, CAMPUS UAB, BELLATERRA
HOME PROGRAM ORGANIZERS REGISTRATION VENUE CONTACT
WELCOME
FLYER
Pulsed laser deposition (PLD) and sputtering are common
techniques for thin film growth. PLD has become the leading
technique for deposition of complex oxides, whereas sputtering
is a standard technique for preparation of metal and oxide films,
either in research laboratories and industry. Nowadays, these
techniques allow fabrication of oxide and metal thin films and
heterostructures with atomic quality control.
In the Meeting on Pulsed Laser Deposition and Sputtering, 6
tutorials will review the basics of these techniques and will
present the new facilities and capabilities of the Thin Films
Laboratory at ICMAB.
There will be 12 contributed talks on thin film growth by PLD and sputtering (with focus on growth
phenomena and influence of deposition conditions).
The Meeting will include observation of real experiments of thin film deposition and RHEED analysis.
ORGANIZERS
Florencio Sánchez and Nico Dix
Thin Films Laboratory (ICMAB)
With the support of the ICMAB SeminarsCommittee
DEADLINES Deadline for late registration January 17, 2013
WHEN&WHERE
Map Sat Terading...
ICMAB-CSIC08193, Bellaterra, Spain January 24 and 25, 2013
(focus on growth and influence of deposition conditions;
each 15 or 20 min).Abstract deadline: 17/12/2012
Sputtering
16:00Nico Dix
(ICMAB-CSIC)The ICMAB Thin Films
Laboratory
Fundamentals of thin film growth by physical vapor deposition
11:00 Coffee break
11:30Florencio Sánchez
Abstract deadline: 17/12/2012
13:30 Lunch (not included)
15:00Experiments: 1) PLD growth;
2) RHEED observation
17:00 Coffee break
17:30Visit to the Thin Films
Laboratory(small groups,
(ICMAB-CSIC)Pulsed laser deposition
12:30Nico Dix
(ICMAB-CSIC)Reflection high energy electron
(small groups, preregistration required)
Organized by :Organized by :Florencio Florencio SánchezSánchez and and NicoNico DixDixThin Films Laboratory (ICMAB)Thin Films Laboratory (ICMAB)With With the support of the ICMAB Seminars Committeethe support of the ICMAB Seminars Committee
![A Supersonic Plasma Jet Source for Controlled and Efficient Thin Film Deposition · 2013. 12. 24. · thin film deposition techniques, such as CVD [6,7], sputtering [8] and pulsed](https://static.documents.pub/doc/80x56/60d9a16e7cb36c07d9210392/a-supersonic-plasma-jet-source-for-controlled-and-efficient-thin-film-deposition.jpg)
