12
PUMPS
Technical and visual modifications are reserved.
Double diaphragm pump 1½“PDM-MEM9340 340 l/min
Order No. Type Material design ATEX
53030073 PDM-MEM9340-VA-TF-TF-VA-TF VA X
53030072 PDM-MEM9340-PP-TF-TF-PP-FKM PP X
53030075 PDM-MEM9340-PV-TF-TF-VA-TF PVDF X
53030219 PDM-MEM9340-AL-TF-TF-AL-TF AL X
Further versions on request
Output approx. 340 l/minATEX C`II 3/3 GD c IIB T135°C (zone 2)
Media
The pump is suitable for conveying various fluids (media).The resistance to media must be checked in individual cases.We will be glad to advise you on the suitability for your specific application.
Features
■ Universally applicable
■ Oil-free operation
■ Low-maintenance
■ Suitable for dry running
■ Good chemical resistance
■ No spring loaded ball valves
PDM-MEM9340
Technical data
Transmission Max. output drive fluid connections operating pressure compressed air connection suction height dry weight
Max. medium temperature max. solid material Ø (round) viscosity pumping medium noise level
: : : : : : : : :
: : : :
1 to 1 340 l/min pneumatic G1½“ 2 - 7 bar compressed air, filtered - oiled or unoiled G½“ 6 m VA = approx. 32 kgPP = approx. 16 kgPVDF = approx. 20 kgAL = approx. 21 kg95 °C (60°C PP-Version) 6 mm 10.000 mPas (20 °C) 82 db(A)
13
PUMPS
Technical and visual modifications are reserved.
disc
harg
e he
ad (
m)
fluid flow rate (l/min)
00 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380
10
20
30
40
50
60
70
6 bar
4 bar
2 bar
Conveyed fluid volume
Double diaphragm pump 1½“PDM-MEM9340 340 l/min
493
3268,50
493
417
254
138
G 1 1/2“ Pressure connection
G1/2“ Supply air
G 1 1/2“ Suction connection
Material
Side partmiddle section of the housing diaphragm valve balls valve seals valve seats
: : : :: :
53030073
stainless steel PP + glass fibrePTFE PTFE PTFE stainless steel
53030072
PP PP + glass fibrePTFE PTFE FKM PP
53030075
PVDF PP + glass fibrePTFE PTFE PTFE stainless steel
53030219
Aluminium PP + glass fibrePTFE PTFE PTFE stainless steel
PDM-MEM9340