244 Bergen Boulevard, Woodland Park, NJ 07424 Phone: 973.785.4347 · Fax: 973.785.4207 Web: www.fsrinc.com · E-mail: [email protected]PWB-100 PWB-100 OVERALL DIMENSIONS PWB-100 OVERALL DIMENSIONS OTHER FSR PRODUCT OFFERINGS OTHER FSR PRODUCT OFFERINGS VIEW "A" 3.63 10.94 BLOCK-OFF PANEL (3 INCLUDED) WITH GROMMET (1 INCLUDED) AC OUTLET BOX (1 INCLUDED) LOW-VOLTAGE ENTRY BOX (1 INCLUDED) LOW-VOLTAGE ENTRY BOX AND AC OUTLET BOX MAY BE MOUNTED ON TOP OR BOTTOM VIEW "A" WALL MOUNTED SURFACE 3.55 FROM WALL MOUNTED SURFACE C L 4.40 4.77 1.79 2.16 1.42 .58 OPPOSITE SIDE IS MIRROR IMAGE PWB-100 BOX CAN BE ROTATED 180° TO POSITION AC OPENING ON LEFT OR RIGHT SIDE 7.02 5.23 7.39 C L (8) 1/2" KNOCKOUTS 1" & 1-1/4" KNOCKOUT 1/2" & 3/4" KNOCKOUT 1/2" & 3/4" KNOCKOUT AC OUTLET OPENING IPS INSERT OPENING 1" x 2" OVAL KNOCKOUT CENTERED ON BLOCK-OFF PANEL The Intelligent Plate Solution (IPS) line is a wide variety of inter- connect solutions to satisfy any AV interface application. Create unlimited combinations of connector inserts with this diverse assortment of sleek wall plate and under table mount- ing styles. Customize your table, wall or floor box with our IPS plates. FSR addresses the rising issue of network security with the new series of locking wall boxes. With 18 different models, every- thing from recessed to surface mounts are available for new or existing construction. Store any wall plate or connections safe- ly and securely. IPS-WP2Q-WHT (populated) WB-PR26 (populated) MADE IN THE USA Specifications are subject to change without notice. PWB-100 Plasma/Flat Panel Display Wall Box Metal Products Group PWB-100 The PWB-100 is the essential installation accessory for any flat panel display. It installs easily in the wall behind any dis- play allowing your screen to sit flush against the wall. This unit provides a neat and secure environment for the audio, video, control and power connections. The PWB-100 is 11”W x 5.25”H x 3.57”D and installs easi- ly between any two standard studs in the wall. Once pop- ulated the overall height is 7.39” behind the wall. Connections and cable entry can be on the top or the bot- tom depending on installation preference. Designed to mount along the bottom edge behind a Plasma or LCD dis- play, the PWB-100 provides a single point for all your con- nections. The unit accommodates up to six single space Intelligent Plate Solution plates and a UL listed single gang gem box for AC power. The PWB is available in white or black and is suitable for painting or other finishing, matching any décor. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible. The cover screws onto the front of the box once all connections are in place. FSR designed this unit for new and existing construction. Brackets are included for mounting to studs in new con- struction as well as surface mount clips for mounting to sheet rock or plywood in existing construction. 1 - Low voltage back box 1 - UL listed Gem box 3 - Block off plates 2 - Custom madison clips 2 - Surface mount clips 2 - Stud mount brackets 1- Pass through grommet, additional grommets available use part #13342 DESCRIPTION DESCRIPTION INCLUDED ACCESSORIES INCLUDED ACCESSORIES FSR Inc. 244 Bergen Boulevard, Woodland Park, NJ 07424 Phone: 973.785.4347 · Fax: 973.785.4207 Web: www.fsrinc.com · E-mail: [email protected]Order Desk: 1-800-332-FSR1 LIT1163B FEATURES FEATURES • Rugged 14 gauge steel back box with 1 / 16” front cover • Compatible with FSR’s IPS inserts • Can be installed in new or old work (mounting adapters included) • AC and low voltage back box included • Connectors are hidden behind an attractive cover • Multiple knockouts in a variety of sizes • UL listed AC back box provided APPLICATIONS APPLICATIONS • Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums • Schools • General Meeting Facilities • Airports • Arenas ORDERING INFORMATION ORDERING INFORMATION PWB-100-WHT = White Cover PWB-100-BLK = Black Cover Other options are available. Consult sales for details. With Cover Without Cover Now with three “block off” plates and one grommet included! CONFORMS TO UL STD 514A CERTIFIED TO CSA STD C22.2 NO. 18.1-04 Interior shown with IPS plates and accessories that are not included.
LOW-VOLTAGE ENTRYBOX AND AC OUTLETBOX MAY BE MOUNTEDON TOP OR BOTTOM
VIEW "A"
WALL MOUNTEDSURFACE
3.55 FROM WALLMOUNTED SURFACE
CL
4.40
4.771.79
2.16
1.42.58
OPPOSITE SIDE IS MIRROR IMAGEPWB-100 BOX CAN BE ROTATED 180° TO
POSITION AC OPENING ON LEFT OR RIGHT SIDE
7.02
5.23
7.39
CL
(8) 1/2" KNOCKOUTS
1" & 1-1/4"KNOCKOUT
1/2" & 3/4"KNOCKOUT
1/2" & 3/4"KNOCKOUT
AC OUTLET OPENING
IPS INSERT OPENING
1" x 2" OVAL KNOCKOUT CENTERED ON BLOCK-OFF PANEL
The Intelligent Plate Solution (IPS) line is a wide variety of inter-connect solutions to satisfy any AV interface application.Create unlimited combinations of connector inserts with thisdiverse assortment of sleek wall plate and under table mount-ing styles. Customize your table, wall or floor box with our IPSplates.
FSR addresses the rising issue of network security with the newseries of locking wall boxes. With 18 different models, every-thing from recessed to surface mounts are available for new orexisting construction. Store any wall plate or connections safe-ly and securely.
IPS-WP2Q-WHT (populated)
WB-PR26 (populated)MADE INTHE USA
Specifications are subject tochange without notice.
PWB-100Plasma/Flat Panel Display Wall Box Metal Products Group
PWB-100
The PWB-100 is the essential installation accessory for anyflat panel display. It installs easily in the wall behind any dis-play allowing your screen to sit flush against the wall. Thisunit provides a neat and secure environment for the audio,video, control and power connections.
The PWB-100 is 11”W x 5.25”H x 3.57”D and installs easi-ly between any two standard studs in the wall. Once pop-ulated the overall height is 7.39” behind the wall.Connections and cable entry can be on the top or the bot-tom depending on installation preference. Designed tomount along the bottom edge behind a Plasma or LCD dis-play, the PWB-100 provides a single point for all your con-nections. The unit accommodates up to six single spaceIntelligent Plate Solution plates and a UL listed single ganggem box for AC power.
The PWB is available in white or black and is suitable forpainting or other finishing, matching any décor. It has acable exit slot for the display connections and the excesscable can easily be hidden inside of the box making theentire installation as clean as possible. The cover screwsonto the front of the box once all connections are in place.
FSR designed this unit for new and existing construction.Brackets are included for mounting to studs in new con-struction as well as surface mount clips for mounting tosheet rock or plywood in existing construction.
1 - Low voltage back box 1 - UL listed Gem box3 - Block off plates 2 - Custom madison clips2 - Surface mount clips 2 - Stud mount brackets1- Pass through grommet,
• Rugged 14 gauge steel back box with1⁄16” front cover
• Compatible with FSR’s IPS inserts• Can be installed in new or old work(mounting adapters included)
• AC and low voltage back box included• Connectors are hidden behind an attractive cover• Multiple knockouts in a variety of sizes• UL listed AC back box provided
APPLICATIONSAPPLICATIONS
• Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums• Schools • General Meeting Facilities • Airports • Arenas
ORDERING INFORMATIONORDERING INFORMATION
PWB-100-WHT = White CoverPWB-100-BLK = Black CoverOther options are available. Consult sales for details.
With Cover Without Cover
Nowwith three
“block off” platesand one grommet
included!
CONFORMS TO UL STD 514ACERTIFIED TO CSA STD C22.2 NO. 18.1-04
Interior shown with IPSplates and accessories that
are not included.
PWB-100
PWB-100 ACCESSORIESPWB-100 ACCESSORIES
PWB-100
TYPICAL INSTALLATIONSTYPICAL INSTALLATIONS
PWB-100 BOX
STUD
(2) STUD BRACKET (2 - #6-32 x 1/4" PAN HEAD SCREWS)
COVER (4 PAINTED#6-32 x 3/4" OVALHEAD SCREWS)
1/2" - 5/8" WALLTHICKNESS
NEW WORK INSTALLATION WALL OPENING: 11" x 5-1/4"
SHOWN WITH ACCESSORY LOW-VOLTAGE CONDUIT ENTRY BOX (2 - #6-32 x 1/4" PAN HEAD SCREWS)
Most items above are available inwhite, ivory or black to match thedecor. We are always adding to our IPS and SS line. Please visit our website or contact sales for detailed information.
