+ All Categories
Home > Documents > PWR - SpecificationBL driveLINE SP Series PWR Printed Input Voltage Max. Line Power Max. Current...

PWR - SpecificationBL driveLINE SP Series PWR Printed Input Voltage Max. Line Power Max. Current...

Date post: 14-Jul-2020
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
2
For more information, please download the BL LIGHTING catalogue BL LIGHTING. ILLUMINATE EVERYTHING 111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 F: 1-604-321-0445 E: [email protected] Copyright © 2017 BL INNOVATIVE LIGHTING. All Rights Reserved. PROJECT CLIENT TYPE Solid State Lighting is sensitive to power fluctuations Surge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failure Lack of surge protection may void your warranty bllighting.com Surge Protector for Line Voltage LED Luminaires 100 - 125VAC, Plug-in Receptacle Certification Electrical SPECIFICATIONS - A01 - BL driveLINE SP Series PWR Printed Input Voltage Max. Line Power Max. Current Protection Surge Current Rating Rating (2mS) Max. Clamping Voltage 100V - 125VAC 1875W 15A Type 3 SPD 30,000A, 8/20 μSec Wave 600 Joules 500V Mechanical Housing Construction Environmental Weight Plastic, Ivory White IP20 126g (4.4oz) LINE IP20
Transcript
Page 1: PWR - SpecificationBL driveLINE SP Series PWR Printed Input Voltage Max. Line Power Max. Current Protection Surge Current Rating Rating (2mS) Max. Clamping Voltage 100V - 125VAC 1875W

For more information, please download the BL LIGHTING catalogue

BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 F: 1-604-321-0445 E: [email protected] Copyright © 2017 BL INNOVATIVE LIGHTING. All Rights Reserved.

PROJECT CLIENT TYPE

Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

bllighting.com

Surge Protector for Line Voltage LED Luminaires100 - 125VAC, Plug-in Receptacle

Certification

Electrical

SPECIFICATIONS - A01 -

BL driveLINE SP Series PWR Printed

Input VoltageMax. Line PowerMax. CurrentProtectionSurge Current RatingRating (2mS)Max. Clamping Voltage

100V - 125VAC1875W15AType 3 SPD30,000A, 8/20 µSec Wave600 Joules500V

MechanicalHousing ConstructionEnvironmentalWeight

Plastic, Ivory WhiteIP20126g (4.4oz)

LINEIP20

Page 2: PWR - SpecificationBL driveLINE SP Series PWR Printed Input Voltage Max. Line Power Max. Current Protection Surge Current Rating Rating (2mS) Max. Clamping Voltage 100V - 125VAC 1875W

For more information, please download the BL LIGHTING catalogue

BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 F: 1-604-321-0445 E: [email protected] Copyright © 2017 BL INNOVATIVE LIGHTING. All Rights Reserved.

PROJECT CLIENT TYPE

Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

bllighting.com

Dimensions

Surge Protector for Line Voltage LED Luminaires100 - 125VAC, Plug-in Receptacle

SPECIFICATIONS - A02 -

BL driveLINE SP Series PWR Printed

65.0 [2 9

16"]

30.0 [1 3

16"] 45.0 [1 3

4 "]


Recommended