Date post: | 07-Feb-2017 |
Category: |
Documents |
Upload: | andrew-dean |
View: | 9 times |
Download: | 0 times |
QA Weld Tech Inspection & Testing Services
Weld Overlay
Flowspoolsand Pigging
Loops
WeldLink™ CNCMachining
SpecialistWelding
Inspectionand Testing
For over 36 years QA Weld Tech has been supporting the Oil & Gas, Power Generation, and Petrochemical Industries by supplying a range of specialist welding & engineering services from our facilities in Middlesbrough UK. Fully qualified staff and Quality Management Systems to ISO 9001 & ISO 3834-2 and ASME VIII Div 1 & Div 2 U Stamp ensure that work meets the highest international standards, while adherence to ISO 14001 & ISO 18001 demonstrates our commitment to the environment and health & safety.
Significant investment in our modern hydrostatic pressure test facilities enables us to offer third party testing for manufacturers of pipe spools, valves and components up to 1,500 bar (22,500 psi) and to API and BS 8010 standards.
Pressure Testing Services • Fully trained pressure test technicians
• Twin 4m x 4m cells (expandable to 8m x 4m) independently certified.
• High pressure testing with digital (or analogue) data logging and chart recording
• Remote video monitoring
• All equipment is calibrated every 3 months
• Strict adherence to safety with interlocking doors
Welding Consultancy
QA Weld Tech Limited, 2a Bowes Road, Riverside Park Industrial Estate, Middlesbrough, TS2 1LU Tel: +44 (0)1642 222831Email: [email protected] www.qaweldtech.com
We also offer a full range of support services, ranging from NDT and metallurgy, through to welding consultancy services.
NDT & Metallurgy• Magnetic Particle Inspection
• Liquid Penetrant Inspection
• Ultrasonic Testing
• Wall Thickness Assessments
• Visual Inspection
• Radiographic Interpretation
• Positive Material Identification
• Hardness Testing
• Micro/Macro Analysis
Welding ConsultancyOur welding operations are supported by European Welding Engineers and Welding Technicians with experience of interpreting and implementing the standards and specifications of the most demanding of clients.
• Weld Procedure Qualification in accordancewith BS EN ISO 15614-2
• Welder Coding (BS EN 287-1, ISO 9606, AWS D1.1)
• Welding Inspection to CSWIP 3.1
• ISO 3834 Compliance
• Testing through UKAS accredited laboratories
• Failure Investigations
QA Weld Tech Limited, 2a Bowes Road, Riverside Park Industrial Estate, Middlesbrough, TS2 1LU Tel: +44 (0)1642 222831Email: [email protected]