QOCQuick Opening Closure
www.tormenegroup.com
QOC | Quick Opening Closure
2
T-Speedlock • T-Ringlock • T-Clamploc
Tormene Group is able to design and manufacture Quick
Opening Closures in accordance with ASME VIII Div. 1
App. 24 and special FEA design, from 4” to 80”, with a
pressure range that goes from class 150# to 2500# / API
10000, carbon steel, stainless steel, alloy materials and
overlay, welding materials.
Tormene Group has developed two new products:
T-SPEEDLOCK and T-RINGLOCK, which provide both
a practical and economical solution for horizontal and
vertical pressure equipment requiring a fast internal
access as Scrapper and pig Traps, Filters, Scrubbers,
Manways openings.
QUICK OPENING CLOSURES
3
ENGINEERING & FABRICATIONT-Speedlock and T-Ringlock calculation is performed
using the Finite Element Analysis (F.E.A.) according to
ASME VIII div.2 part.5, EN 13445-3 and PD 5500, and
meets the requirements of UG-35 ASME VIII div.1.
TECHNICAL DATADimensions From 4” Up To 80”
Class From 150# To 2500# / Api 10000
Construction Material Carbon Steel / Stainless Steel / Alloy Materials
Hinge Orientation Right Or Left
Final Coating Natural Finish
Seal Type Lip Seal ( Pur / Hnbr / Viton )
OPTIONAL ON REQUESTFinal coating according to Customers’ specifications
(for diameters over 24”) Opening with Gerbox / Hydraulic / Pneumatic
Partial asme stamp inspection
Interlock system
Hydraulic test
TA Valves & Regulators Company Sichuan - China • +86 813 5536 [email protected]
Tormene Americana SABuenos Aires - Argentina • +54 [email protected]
Tormene Industriale srlPadua - Italy • +39 049 [email protected]
Tormene Americana do BrasilRio de Janeiro - Brazil • +55 21 [email protected]
Tormene Andina SACLima - Peru • +511 628.1595/[email protected]
Euromag International srlPadua - Italy • +39 049 [email protected]
Tormene Americana ColombiaBogotà - Colombia • +571 [email protected]
EMEA - ASEA
NA - LATAM
PRC
Euromag Andina Lima - Peru • [email protected]
Light Engineering + Design srlPadua - Italy • +39 049 [email protected]
www.tormenegroup.com
All rights reserved. No part of this catalogue may be reproduced, stored in a database or otherwise used without the authorisation of Tormene. The policy of Tormene is dictated by the ontinuing technological and project innovation. Therefore, the Company reserves the right to amend the data contained herein without notice.
17_Q
OC
_EN
G_R
01