MODEL WOOFER TWEETER POWER FREQ. RESP. [in, mm] [in, mm] [watts PEAK/RMS†] [watts]

QS65.2 6-1/2, 165 1-3/16, 30 200/100 40-22k

QS60.2 6, 160 1-3/16, 30 180/90 50-22k

QS COMPONENTS

+KICKER’s ultimate component system in two sizes

+2-way bi-ampable passive crossovers covered with Plexiglas® worthy of displaying

+Tweeter attenuation with dependable, oxidation-resistant input jumpers

+3-layer Tri-Tech™ mid cones; 30mm DuPont™ Tetoron®-domed tweeters

+QS60.2 includes 6 x 8 adapter plate for use in Ford and Chrysler vehicles

MIDSA NDTW EETSAmazing sound is what put us on the map. Our history is stacked around the full range of frequen-cies that flow from the decks, doors, and k ick panels in a vehic le . KICKER drivers are the definition of uncanny clarity and utmost reliability.

†Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models.

17

“These speakers sound

phenomenal! I have them

mounted coaxially in the

dashboard of my Blazer and

they are incredibly clear.

-Jakubska”

MODEL WOOFER TWEETER POWER FREQ. RESP. [in, cm] [in, mm] [watts PEAK/RMS†] [watts]

KS350 3-1/2, 8.9 1/2, 13 40/20 80-20k

KS400 4, 10 1/2, 13 60/30 60-20k

KS4100 4x10, 10x25 1/2, 13 70/35 45-20k

KS460 4x6, 10x15 1/2, 13 60/30 50-20k

KS5250 5-1/4, 13 3/4, 20 135/45 45-21k

KS600 6, 16 3/4, 20 195/65 43-21k

KS650 6-1/2, 16.5 3/4, 20 195/65 40-21k

KS680 6x8, 16x20 3/4, 20 180/60 45-21k

KS690 6x9, 16x23 1, 25 270/90 30-21k

KS6930 6x9, 16x23 3/4, 20 300/100 30-21k

[3-way] MID [in, cm]: 1, 2.5

+KICKER’s primary coaxial drop-in replacements in factory door locations

+10 sizes ensure we’ve got the clearest mid- and high-frequencies you need

+Curvilinear woofer cones and Santoprene surrounds for rich, smooth sound

+Coaxials use various tweeter sizes and dome materials to maximize highs

KS COAXIALS & 3-WAY

“Just installed four KS350’s and four KS680’s in

my 1959 Ford F-100 Panel Truck, one of each in each

corner of the vehicle front and rear... awesome, clean

sound! I can finally hear my music while going down

the freeway with the windows down.

-DJKen”

MID

S

MODEL WOOFER TWEETER POWER FREQ. RESP. [in, cm] [in, mm] [watts PEAK/RMS†] [watts]

KS650.2 6-1/2, 16.5 1, 25 150/75 35-21k

KS60.2 6, 16 1, 25 150/75 35-21k

KS50.2 5-1/4, 13 1, 25 130/65 38-21k

+High-performance, factory-speaker component replacements

+Mids have polypropylene cones with a tough Santoprene® surrounds

+Several mounting options for tweeters, including coaxially by removing mids’ plug

+Passive crossover network with illuminated protection

+KS50.2 includes 6 x 8 adapter plate for use in Ford and Chrysler vehicles

KS COMPONENTS

MODEL WOOFER TWEETER POWER FREQ. RESP. [in, cm] [in, mm] [watts PEAK/RMS†] [watts]

RS65.2 6-1/2, 16.5 1, 25 200/100 40-21k

RS60.2 6, 16 1, 25 180/90 50-21k

+Smooth, rich frequencies using most of elite QS-Series Systems’ technologies

+Cast-aluminum midrange baskets and 25mm Tetoron elliptical-dome tweeters

+Three tweeter-mounting options, including coaxially in the mids’ centers

+2-way passive crossovers designed to optimize audio output

+RS60.2 includes 6 x 8 adapter plate for use in Ford and Chrysler vehicles

RS COMPONENTS

“I just purchased the RS Series for my

BMW 328I 2000. Sounds good, I like it.

-Bigwen1”

MODEL DOME DIAMETER POWER FREQ. RESP. [in, mm] [watts PEAK/RMS†] [watts]

KS13 Kaladex 1/2, 13 150/75 4500-21k

KS20 Titanium 3/4, 20 190/95 4500-21k

KS25 Aluminum 1, 25 300/150 4000-20k

+Loud and clear additions to your existing system, adding live-performance realism

+Three choices of mounting options: flush, surface or angled

+Dependable high-pass crossover network with illuminated protection

KS TWEETERS

MODEL WOOFER TWEETER POWER FREQ. RESP. [in, cm] [in, mm] [watts PEAK/RMS†] [watts]

DS680.2 6x8, 16x20 3/4, 20 90/45 40-21k

DS650.2 6-1/2, 16.5 3/4, 20 120/60 35-21k

DS600.2 6, 16 3/4, 20 120/60 35-21k

MODEL WOOFER TWEETER POWER FREQ. RESP. [in, cm] [in, mm] [watts PEAK/RMS†] [watts]

DS350 3-1/2, 8.9 1/2, 13 30/15 80-20k

DS400 4, 10 1/2, 13 50/25 60-20k

DS460 4x6, 10x16 1/2, 13 50/25 50-20k

DS5250 5-1/4, 13 1/2, 13 70/35 45-20k

DS600 6, 16 1/2, 13 100/50 43-20k

DS650 6-1/2, 16.5 1/2, 13 100/50 40-20k

DS680 6x8, 16x20 1/2, 13 70/35 45-20k

DS6930 6x9, 16x23 1/2, 13 140/70 30-20k

[3-way] MID [in, cm]: 2, 5

+Exceptional sound at a great value to complement your subwoofer

+Polypropylene midrange cones with UV-treated ribbed surround

+Tweeters use lightweight neodymium magnets and titanium domes

+DS680.2 system made specifically for 5 x 7 or 6 x 8 applications

+KICKER’s best value for great-sounding, drop-in factory replacements

+8 sizes of woofers, all with half-inch tweeters

+Includes an enhanced 6 x 9 3-way system with boost from a 2-inch midrange

+DS680 coaxials made specifically for 5 x 7 or 6 x 8 applications

DS COMPONENTS

DS COAXIALS & 3-WAY

FOR MORE SPECS AND ATHLETE INFOGO TO KICKER.COM

†Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models.

MODEL WOOFER TWEETER POWER FREQ. RESP. [in, cm] [in, mm] [watts PEAK/RMS†] [watts]

PS5250 5-1/4, 13 3/4, 20 100/50 60-20k

+Weather-proof, high-efficiency designed as drop-ins for motorcycle fairings, ATVs, UTVs or marine applications

+Ultra-clear, extremely loud audio reproduction through a helmet at highway speeds

+Lightweight neodymium woofer magnets for high output, superb sound, and proper bike handling

+Durable polypropylene cones and inverted surrounds for max excursion in a small space

+Neo-titanium-domed tweeters bridge-mounted to withstand extreme vibration

+KICKER Marine Components meet or exceed industry

standards for environmental humidity and corrosion* and

for material degradation due to UV exposure.**

*ASTM B117 200 hr. Salt Fog Test

**ASTM G154 400 hr. Accelerated UV Test

PS5250 COAXIAL

ELEMENTSLegendary KICKER sound and power translates to the water, forests, and mountains as well. From the lakes and harbors, to the rocky cliffs and desert sands, KICKER strives to keep you Livin’ Loud in the elements.

†Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models.

+NEW2010

21

MODEL WOOFER TWEETER POWER FREQ. RESP. [in, cm] [in, mm] [watts PEAK/RMS†] [watts]

KS6250.2 6, 16 1, 25 225/75 35-21k

WOOFER SIZE POWER HANDLING FREQ. RESP. [in, cm] [watts PEAK/RMS†] [Hz]

KM10 10, 25 300/150 30 - 500

KM10 SUB

+Made-for-marine subwoofer works from a sealed or vented enclosure

+Durable with a sealed motor, cone and locking terminal covering

+Rigid injection-molded cone and Santoprene® surround

+UV-treated; corrosion-proof hardware; magnetic shielding

KM6250.2 SYSTEM

+Remarkable sound quality from KICKER’s marine component system

+6-inch midrange drivers with removable external crossovers and one-inch tweeters

+Sealed motors, cones, and locking terminal covers for weather protection

+UV-treated; corrosion-proof hardware; magnetic shielding

MODEL WOOFER TWEETER POWER FREQ. RESP. [in, cm] [in, mm] [watts PEAK/RMS†] [watts]

KM6200 6, 16 3/4, 20 195/65 35-21k

KM6000 6, 16 1/2, 13 150/50 35-21k

MODEL TYPE WOOFER TWEETER POWER FREQ. RESP. [in, cm] [in, mm] [watts PEAK/RMS†] [watts]

KB6000 2-way 6-1/2, 16.5 2x5, 51x27 150/75 55k-21k

KB6000W 2-way 6-1/2, 16.5 2x5, 51x27 150/75 55k-21k

+Spectacular high- and middle-frequencies in a drop-in coaxial package

+6-inch woofers with 3/4-inch (6200 in silver-flake) and 1/2-inch tweeters (6000 in white)

+MAXBasket Geometry™ puts oversized 6.5-inch cones in 6-inch baskets for louder output

+Magnetic shielding on KM6200 for minimizing compass and gauge deviation within your boat’s dash

+2-way system based on the Original KICKER®, the world’s first full-range enclosure

+Weather-resistant, molded enclosures great for indoor, outdoor and marine applications

+Black or white boxes with 6.5-inch woofers and 2 x 5-inch compression-loaded tweeters

KM COAXIALS

KB FULL-RANGE

MAR

INE

†Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models.

8-1/

8”20

.7cm

11”27.9cm

8-1/

8”

20.7

cm

WOOFER SIZE POWER HANDLING TYPE DIM A DIM B DIM C DIM D [in, cm] [watts PEAK/RMS†] [in, cm] [in, cm] [in, cm] [in, cm]

SKM10 10, 25 300/150 SINGLE 8-5/16, 21.1 8-5/16, 21.1 16-1/16, 40.8 23-15/16, 60.8

MODEL TYPE WOOFER TWEETER TWEETER HORN POWER HANDLING [in, cm] [in, mm] [in, mm] [watts PEAK/RMS†]

KM6500.2 2-way 6-1/2, 16.5 N/A 2, 50 400/200

KM6500 midrange 6-1/2, 16.5 N/A N/A 400/200

KMT6 2-way 6-1/2, 16.5 3/4, 20 2x6-1/2, 51x165 300/150

KMT6 DIM. [in, cm]: 19-1/16W x 9H x 11D, 48.4W x 22.9H x 28D

SKM SUBBOX

KM TOWER SYSTEMS

+Hammering bass from a compact sealed enclosure

+Tough, molded polyethylene enclosure for high water-resistance

+Compact for mounting in driver- or passenger-side toe well or rear-seat storage

+Uses the extremely durable, punishing KM10 Subwoofer

+KM6500.2 world’s first horn-loaded, compression-driver component system

+Installs perfectly into existing tower speaker cans, even the bolt patterns

+Add KM6500 midrange speakers for extra intensity of a six-driver system

+KMT6 Long-Throw Tower System provides full-range sound to a skier or boarder

+Dual boxes each feature a pair of 6.5-inch woofers and horn-loaded 20mm tweeters

+Roll-bar adjustable, billet-aluminum mounting brackets

+Provides reliable, weather-resistant power to any KM Marine Speakers

+Top-mounted controls; conformal coating on circuit board for water resistance

+ZXM700.5 includes convenient Class D subwoofer channel for your bass

+Bass boost up to +18dB

MODEL POWER POWER CLASS D DIM A REMOTE BASS [watts/channel] [watts/channel] 2Ω Mono [in, cm, fig. 1] CAPABLE 2Ω stereo 4Ω bridged mono

ZXM350.4 90 x 4 175 x 2 N/A 13-1/2, 34.2 NO

ZXM700.5 85 x 4 165 x 2 420 20, 50.7 YES

ZXM450.2 225 x 2 450 N/A 16-3/4, 42.5 YES

ZXM MULTI/STEREO

A

[fig. 1]

9-5/8”

24.4cm

2-1/

8”5.

4cm

ZXM

// ZXM // CEA-2006 SPECS Description/Model 350.4 700.5 450.2

Rated Pwr., 4Ohm/Ch, 60x4 70x4 150x214.4Vdc, 1% THD (Watts) 210x1

Signal to Noise Ratio -98 -72/-55 -91(ref: 1W, A-weighted)

FOR MORE SPECS AND ATHLETE INFOGO TO KICKER.COM

+NEW2010

+NEW2010

“Wow!! This thing is a “Marine Beast.” Excellent product,

especially if you don’t want to have 2 or 3 amps taking up

your valuable boat space.

-Gilly1228”

+KMT6

+KM6500.2

+KICKER’s reliable Z-Series accessories conveniently packaged together

+Z-Series interconnects and speaker wire, Hyper-Flex power and ground, heavy-duty fuse holder

+One additional year of KICKER amplifier warranty if purchased with the amp

MODEL GAUGE TYPE

ZCK8 8AWG 2-channel

ZCK84 8AWG 4-channel

ZCK4 4AWG 2-channel

ZCK44 4AWG 4-channel

Z-SERIES FULL-SPEC COMPLETE POWER KITS

25

ACCESSORIESKICKER now provides an additional year of warranty with all Amplifier p u rc h a s e s p a i re d w i t h a n y Z-Series Complete Kit or KICKER P o w e r K i t . O t h e r b r a n d s ’ poor-quality, under-spec wiring ki ts reduce KICKER Ampl i f ier performance. A superior-quality K I C K E R I n s t a l l a t i o n K i t i s guaranteed to extend the life of your KICKER Amplifiers. Contact any Authorized KICKER Dealer for qualifying Installation Kits and more information, or log onto kicker.com.

+Take advantage of this offer and get 3 full years of warranty on KICKER Amplifiers

+Amplifiers and Kits must be purchased from an Authorized KICKER Dealer

+Registration is easy on www.kicker.com; simply have your sales receipt and

amp serial number available

+Everything required for amp installation in one entry-level kit

+Interconnects, power and ground, fuse holder, turn-on wire, and more

+All wire made of full-spec, silver-tinned, oxygen-free copper

MODEL GAUGE TYPE

DCK10 10AWG 2-channel

DCK8 8AWG 2-channel

DCK4 4AWG 2-channel

D-SERIES FULL-SPEC COMPLETE POWER KITS

+Contains KICKER-quality, Hyper-Flex power and ground and heavy-duty fuse holder and fuses

+Convenient connectors, zip ties, and heat-shrink wrap to ensure reliability

+One additional year of KICKER amplifier warranty if purchased with the amp

MODEL GAUGE LENGTH

PK8 8AWG 20 ft

PK4 4AWG 20 ft

PKD4 4 & 8AWG 20 ft/ 5 ft

PKD1 1/0 & 4AWG 20 ft/ 5 ft

POWER KITS

+Entry-level kit with Hyper-Flex and Direct-Connect engineering

+Power and ground, fuse holder and fuses, turn-on wire, and connectors

+All wire made of full-spec, silver-tinned, oxygen-free copper

MODEL GAUGE LENGTH

DPK10 10AWG 20 ft

DPK8 8AWG 20 ft

DPK4 4AWG 20 ft

D-SERIES POWER KITS

26

POW

ER

D-SERIES FULL-SPEC COMPLETE POWER KITS

POWER KITS

D-SERIES POWER KITS

FOR MORE SPECS AND ATHLETE INFOGO TO KICKER.COM

+KICKER’s reliable standard, with silver molded RCA ends and identifiable color-coded strain relief

+Silver-tinned, oxygen-free copper wire for superior bass response and signal clarity

+Sure-grip gold collars and split center pins for ultra-secure connection and signal transfer

MODEL TYPE LENGTH

ZI21 2-channel 1 meter

ZI22 2-channel 2 meters

ZI23 2-channel 3 meters

ZI24 2-channel 4 meters

ZI25 2-channel 5 meters

ZI26 2-channel 6 meters

ZI44 4-channel 4 meters

ZI46 4-channel 6 meters

ZIYM Y-adapter, 2 male 1 female N/A

ZIYF Y-adapter, 2 female 1 male N/A

ZISL speaker-level to RCA 0.5 meter

Z-SERIES SIGNAL CABLE

+Darkest blacks and brightest whites with Hyper-Flex, True 75-Ohm video cable

+KICKER uses 75-Ohm cable, the world standard for composite video transmission

+Clearest picture with shielded flex-braid center conductors and Teflon dielectric

MODEL LENGTH

ZV1 1 meter

ZV2 2 meters

ZV3 3 meters

ZV4 4 meters

ZV5 5 meters

Z-SERIES VIDEO SIGNAL CABLE

+High-end, sophisticated signal cable for long-term, trouble-free connection

+Tight-grip RCAs with heavy-duty, proprietary-machined metal ends; protective wire-loom jacket

+Large gold-plated K-cut collars and dual-split center pins for the most contact and max signal transfer

MODEL TYPE LENGTH

XI21 2-channel 1 meter

XI22 2-channel 2 meters

XI23 2-channel 3 meters

XI24 2-channel 4 meters

XI25 2-channel 5 meters

XI26 2-channel 6 meters

XI44 4-channel 4 meters

XI46 4-channel 6 meters

XIYM Y-adapter, 2 male 1 female N/A

XIYF Y-adapter, 2 female 1 male N/A

X-SERIES SIGNAL CABLE

+High-end, sophisticated speaker wire for cleanest audio signal and long-term reliability

+Tightly twisted, silver-tinned, OFC eliminates unwanted noise

+Two wire sizes available for acquiring in bulk or by job

+Convenient zip line lets you easily remove outer insulation

MODEL GAUGE LENGTH

XW1620 16AWG 20 ft

XW16300 16AWG 300 ft

XW1220 12AWG 20 ft

XW12150 12AWG 150 ft

X-SERIES SPEAKER WIRE

+KICKER’s reliable standard featuring noise-killing, tightly twisted OFC

+Silver-tinned, oxygen-free copper wire for superior bass response and signal clarity

+Hyper-Flex insulation and multi-strand construction for ultimate bend and twist

MODEL GAUGE LENGTH

ZW1620 16AWG 20 ft

ZW16400 16AWG 400 ft

Z-SERIES SPEAKER WIRE

+Convenient, multi-speaker, tightly-twisted OFC for long runs of up to four channels

+Also includes conductor for remote turn-on connection

MODEL TYPE LENGTH

DWM9120 22AWG 9-conductor 120 ft

D-SERIES 9-CONDUCTOR SPEAKER WIRE

28

POW

ER

D-SERIES 9-CONDUCTOR SPEAKER WIRE

29

FOR MORE SPECS AND ATHLETE INFOGO TO KICKER.COM

+Virgin PVC, Hyper-Flex insulation and multi-strand construction for ultimate bend and twist

+Cobalt blue and gun-metal gray translucent insulation

+Remains ultra-flexible under hot or cold temperature extremes

MODEL COLOR GAUGE LENGTH

PWB8200 BLUE 8AWG 200ft

PWG8200 GRAY 8AWG 200ft

PWB4100 BLUE 4AWG 100ft

PWG4100 GRAY 4AWG 100ft

PWB050 BLUE 1/0AWG 50ft

PWG050 GRAY 1/0AWG 50ft

POWER WIRE

+No-fail, nickel-plated, all-brass battery and ground terminals, fuse holders, and distribution blocks

+Rock-solid termination, extreme current flow and supreme protection for any setup

+Direct-Connect engineering for fewest but most secure connections possible

MODEL USE SIZE/TYPE

BTPN3 positive/negative battery terminal [1] 1/0 or 4AWG out, [2] 4 or 8AWG out

GML GM/side-post adapter [1] POS/[1] NEG each

CBP competition battery terminal POS [2] 1/0 or 4AWG out

CBN competition battery terminal POS [2] 1/0 or 4AWG out

DB1448 distribution block [2] 1/0 or 4AWG in, [4] 4 or 8AWG out

GT1 ground termination block [2] 1/0 or 4AWG

FHA AFS/ANL fuse holder N/A

BRASS HARDWARE

+Automotive-grade, platinum-plated AFS and ANL fuses

+Consistently provides peak current demands while insuring complete protection

+Two fuses per pack so there’s always a spare

MODEL TYPE POWER

AFS40 AFS 40 amp

AFS50 AFS 50 amp

AFS60 AFS 60 amp

AFS80 AFS 80 amp

ANL100 ANL 100 amp

ANL150 ANL 150 amp

ANL200 ANL 200 amp

ANL300 ANL 300 amp

FUSES