13
662
662
662
663
Track & Recessed
Track and RecessedShine a spotlight on all of the important things in your life
with our collection of track and recessed lighting, available in
several designs and styles.
664 Track & Recessed Designs
Track Packs Quorum’s track lighting is a step above the average track
products in both style and quality. Look for the following
features on Quorum’s product and compare: (1) Our track
head stems are made of metal (not plastic). (2) Our colors
are consistent from the tip of the track head to the track end
caps. Some other brands can’t seem to match their metal and
plastic colors - or they do not paint all the components the
same color and may not paint some components at all. (3)
Our gimbal ring track heads all have a thumb nut to secure
the head position after it is aimed. (4) Our stem connections
are hidden inside of the track head to provide a smooth,
seamless appearance.
Track packs include 3 track heads, 1 floating power feed, 4 foot of single circuit
track section and 2 end caps. Individual items can be ordered on page 658.
12
3 4
Line Voltage Track Packs a. [7201-3-6]
Heads: 7.5"(l) x 4.5"(dia) - (3) 75W R30, PAR30 or BR30
White Flat Back Track Pack
b. [7206-3-6]
Heads: 7.25"(l) x 4.5"(dia) - (3) 75W R30, PAR30 or BR30
White Round Back Track Pack
c. [7210-3-6]
Heads: 5.5"(l) x 3.5"(dia) - (3) 50W PAR20 or R20
White Stepped Cylinder Track Pack
a
b
c
Track & Recessed Designs 665
Line Voltage Track Packs d. [7211-3-6]
Heads: 6.5"(l) x 4.5"(dia) - (3) 75W R30, PAR30 or BR30
White Stepped Cylinder Track Pack
e. [7240-3-6]
Heads: 4"(l) x 2.75"(dia) - (3) 50W PAR20
White Gimbal Ring Track Pack
f. [7241-3-6]
Heads: 4.5"(l) x 4"(dia) - (3) 75W PAR30
White Gimbal Ring Track Pack
g. [7243-3-6]
Heads: 2.75"(l) x 2"(dia) - (3) 45W MRH16 Bi-Pin Halogen
White Line Voltage Gimbal Ring Track Pack
bulbs included
d
e
f
g
666 Track & Recessed Designs
Line Voltage Track Pack a. [7250-3-6]
Heads: 4"(l) x 3.5"(dia) - (3) 50W PAR20
White Cone Track Pack
Halogen Track Accessories b. [3-045-3701]
45W 120V MRH16 Bi-Pin Halogen
24 degree beam spread
For use w/ 7243-3-6 Track Pack and 7243-06 Track Head
Halogen Track Heads c. [7243-06] 2.25"(l) x 2.5"(dia) - (1) 45W MRH16 Bi-pin Halogen
White
(bulb included)
Pendant Track Adapters d. [7309-06]
White
Can be used with both cord-hung pendants and rod-hung pendants.
c
a
d
b
Track & Recessed Designs 667
i. [7250-06] 4"(l) x 3.5"(dia) - (1) 50W PAR20
j. [7251-06] 4.5"(l) x 4.5"(dia) - (1) 75W PAR30
White
k. [7253-06] 4"(l) x 3.5"(dia) - (1) 50W PAR20
l. [7254-06] 4.5"(l) x 4.5"(dia) - (1) 75W PAR30
White
Track Heads e. [7201-06] 7"(l) x 4.5"(dia) - (1) 75W PAR30, R30, or BR30
f. [7205-06] 5.75"(l) x 3.5"(dia) - (1) 50W PAR20 or R20
g. [7206-06] 7.25"(l) x 4.5"(dia) - (1) 75W PAR30, R30, or BR30
White
h. [7211-06] 6.5"(l) x 4.5"(dia) - (1) 75W PAR30, R30, or BR30
White
e
f gh
lkji
668 Track & Recessed Designs
Floating Power Feed Use to connect your track to existing J-Box anywhere along
the track. Comes with canopy cover, connector, end cap and
mounting hardware.
[7308-06]
White
"L" connector Use to connect two lengths of track at a right angle. May be
used as a power feed. Adds 2.75" to overall track length.
[7303-06]
White
Straight Connector Use to connect two or more lengths of track. Adds 1/8th"
to the overall length. The Straight Connector is not a power
feed.
[7304-06]
White
End Cap Individual End Cap to cover track length end.
[7307-06]
White
Track Lengths Complete with one end cap and mounting hardware. 2400W
capacity. 1.5"(w) x .75"(h)
a. [7104-06] 4’ Single Circuit Track
White
Also Available: [7108-06] - 8’ Single Circuit Track
White
Live End Connector Use to connect your track to an existing J -Box. Adds 2.75" to
the overall track length. Cover is included.
[7306-06]
White
Monopoint Adapter Mounts to outlet box for the installation of a single track
head. Mounting hardware is included. 4.5"(square)
[7301-06]
White
a
Track & Recessed Designs 669
Non-IC Recessed Housing For use where insulation is spaced at least 3" from the
housing. Includes integral thermal protector. Meets all UL
and N.E.C. requirements. UL listed for damp locations* and
through branch circuit wiring.
Other features include:
• Junction box - with snap on covers, riveted ground wire
and slotted pry-out knockouts for 1/2" and 3/4" conduit
connections.
• Socket Plate - adjustable and pre-wired to the junction box.
• Bar Hangers - pre-installed and can telescope 13.75" to
24". Can be repositioned to 90 degrees and have crimp-
lock tabs. Housing can be positioned anywhere along the
bar hangers.
• Plaster Frame - break away design allows housing to be
inserted into finished ceilings through a 6.5" opening.
Housing can adjust 1-3/8" for varying ceiling thicknesses.
Housing is removable for access to the junction box.
* Suitable for wet locations when installed in covered ceilings with wet
location trims.
[901]7.5"
6.25"
7" x 10.25"
901 Trims * UL listed with Quorum 901 and UL Classified to use with: Capri R10X & RR10X, Halo H7T & H7RT, Juno TC2 & TC102,
Marco MX7 & RMX7, Progress P7TG & P107TG
**UL listed with Quorum 901 only.
[9700-06]* 7" White Baffle
75W PAR30/R30
[9701-06]* 7" White Baffle
150W PAR38/R40
[9720-014]* Chrome Reflector
75W PAR30/R30
[9806-06]* 8" White Open Metal
Trim
150W PAR38/R40
[9810-06]* 8" White Adjustable
Eyeball 42º Tilt
75W PAR30/R30
[9825-06]* 8" White Metal Trim w/
Albalite Glass
60W A19 - UL Wet
[9830-06]* 8" White Plastic Trim w/
Albalite Glass
60W A19 - UL Wet
[9805-06]* 8" White Open Metal
Trim
75W PAR30/R30
[9700-015]* 7" Black Baffle
75W PAR30/R30
[9700-051]* 7" Brushed Steel Baffle
75W PAR30/R30
(Brushed Steel and White
trim rings included.)
[9831-06]** 8" Plastic Drop Opal Lexan
Lens
60W A19
670 Track & Recessed Designs
903 IC Recessed Housing For use where housing will be in direct contact with
insulation. Includes integral thermal protector. Meets all UL
and N.E.C. requirements. UL listed for damp locations and
through branch circuit wiring.
Other features include:
• Junction box - with snap on covers, riveted ground wire
and slotted pry-out knockouts for 1/2" and 3/4" conduit
connections.
• Socket Plate - adjustable and pre-wired to the junction box.
• Bar Hangers - pre-installed and can telescope 13.75" to
24". Can be repositioned to 90 degrees and have crimp-
lock tabs. Housing can be positioned anywhere along the
bar hangers.
• Plaster Frame - break away design allows housing to be
inserted into finished ceilings through a 6.5" opening.
Housing can adjust 1-3/8" for varying ceiling thicknesses.
Housing is removable for access to the junction box.
[903]
6.25"
7" x 10.25"
7.5"
11"
7.25"
6.25"
6.25"
7.5"
7" x 10.25"
904 IC Recessed Housing
Features are the same as 903 except:
• Mounting clips and cutting template are included
• Bar hangers and plaster frame are not included
909 IC Recessed Housing
Features are the same as 903 except:
• ETL approved for higher wattages as indicated with trims
on the following pages.
[904] [909]
Track & Recessed Designs 671
903, 904 and 909 Trims * UL listed with Quorum 903, 904 and 909 and UL Classified to use with: Capri PR75ICX & PRR75ICX, Halo H7ICT & H7RICT,
Juno IC2 & IC122, Marco ICX7, Progress P8TG & P108TG
**UL listed with Quorum 903, 904 and 909 only.
[9700-06]*
7" White Baffle
75W PAR30/R30 (903 & 904)
100W A19 (909)
[9810-06]*
8" White Adjustable
Eyeball 42º Tilt
75W PAR30/R30
(903 & 904 only)
[9825-06]*
8" White Metal Trim w/
Albalite Glass
40W A19 (903 & 904)
60W A19 (909)
UL Wet
[9830-06]*
8" White Plastic Trim w/
Albalite Glass
40W A19 (903 & 904)
[9805-06]*
8" White Open
Metal Trim
75W PAR30/R30 (903 & 904)
100W A19 (909)
[9700-015]*
7" Black Baffle
75W PAR30/R30 (903 & 904)
100W A19 (909)
[9720-014]*
7" Chrome Reflector
75W PAR30/R30 (903 & 904)
100W A19 (909)
[9700-051]*
7" Brushed Steel Baffle
75W PAR30/R30 (903 & 904)
100W A19 (909)
(Brushed Steel and White trim
rings included.)
[9701-06]**
7" White Baffle
100W PAR38 (909)
[9806-06]**
8" White Open Metal
Trim
100W PAR38 (909)
[9831-06]**
8" Plastic Drop Opal
Lexan Lens
40W A19 (903 & 904)
60W A19 (909)
672 Track & Recessed Designs
905 Non- IC Recessed Housing Small Aperture For use where insulation is spaced at least 3" from the
housing . Includes integral thermal protector. Meets all UL
and N.E.C. requirements. UL listed for damp locations.
Other features include:
• Junction box - with snap on covers, riveted ground wire
and slotted1/2" conduit connectors.
• Socket Plate - adjustable and pre-wired to the junction box.
• Bar Hangers - pre-installed and can telescope 13.75" to
24". Housing can be positioned anywhere along the bar
hangers.
• Plaster Frame - break away design allows housing to be
inserted into finished ceilings through a 4.5" opening.
Housing can adjust 1-3/8" for varying ceiling thicknesses.
Housing is removable for access to the junction box. [905]
4.25"
5.5" x 7.75"
5.5"
906 Remodel Non-IC Recessed Housing Small Aperture Features are the same as 905 except:
• Mounting clips and cutting template are included.
• Bar hangers and plater frame are not included.
[906]
11.5"
4.25"
5.5"
Track & Recessed Designs 673
907 IC Recessed HousingSmall Aperture For use where housing will be in direct contact with
insulation. Includes integral thermal protector. Meets all
UL and N.E.C. requirements. UL and CUL listed for damp
locations.
Other features include:
• Junction box - with snap on covers, riveted ground wire
and slotted pry-out knockouts for 1/2" conduit connectors.
• Socket Plate - adjustable and pre-wired to the junction box.
• Bar Hangers - pre-installed and can telescope 13.75" to
24". Housing can be positioned anywhere along the bar
hangers.
• Plaster Frame - break away design allows housing to be
inserted into finished ceilings through a 4.5" opening.
Housing can adjust 1-3/8" for varying ceiling thicknesses.
Housing is removable for access to the junction box.
[907]
6"
5.25" x 8"
4.25" opening
6"
Small Aperture Trims
[9500-06]
5" White Baffle
50W PAR20/R20
[9500-015]
5" Black Baffle
50W PAR20/R20
[9510-06]
5" White Adjustable Eyeball
50W PAR20/R20 55W R16
