Révisé 2018-12-13 ciot.com TECHNICAL INFORMATION MARVEL STONE - NEW PRODUCT Release - 2017-03-27 - page 1 APPLICATIONS Marvel Stone is ideal for an interior and exterior application on floors and walls in your residential and commercial projects. WATER ABSORPTION FROST RESISTANCE MOHS HARDNESS CHEMICAL RESISTANCE STAIN RESISTANCE ISO 10545/3 ISO 10545/12 EN 101 ISO 10545/13 ISO 10545/14 ≤ 0,1 % RESISTANT NAT.: CONFORM LAP.: 5 STR.: 8 NAT.: UA ULA UHA LAP.: UA ULA STR.: UA ULA UHA CLASS 5 VALEURS NORMES DIN51130- DIN51097 D.C.O.F. ANSI 137.1-2012 (›0,42) SLIP RESISTANCE INSTALLATION AND MAINTENANCE It is suggested to lay tiles with a joint of 2-3 mm. Use high quality adhesive and grout from a manufacturer such as Mapei,following manufacturer’s recommendations and depending on site conditions. It is recommended that you lay the rectangular formats side by side or offset by 20%. Fixing in a 50% staggered configuration is not advised. As soon as the joints have fully set, it is advisable to proceed to the initial post-construction cleaning as described by the manufacturer. Daily maintenance can be performed with a neutral detergent. NAT.:R9 A LAP.: — STR.: R11 A+B+C NAT.: CONFORM STR.: CONFORM LAP.: NOT CONFORM NEW PRODUCT COLORED BODY PORCELAIN STONEWARE R11 V3 FORMATS (Rectified monocaliber tiles) NATUREL RT (NAT. RT): 30 x 60 cm | 45 x 90 cm | 60 x 60 cm | 75 x 75 cm | 75 x 150 cm | 120 x 120 cm | 120 x 240 cm STRUTTURATO RT (STR. RT): 30 x 60 cm LASTRA 20 mm STRUTTURATO RT (STR. RT): 60 x 60 cm | 60 x 120 cm DESCRIPTION Marvel Stone - limestone inspiration by Atlas Concorde is a colored body porcelain stoneware collection that is inspired by the beauty and elegance of natural stone. Installed on floor and walls, Marvel Stone will give a contemporary look and great impact to your design. Pavers 20 mm thick will complement greatly your outdoor living space. COLORS CLAUZETTO WHITE V3 DESERT BEIGE V2 CARDOSO ELEGANT V3 BASALTINA VOLCANO V2 MARVEL STONE LIMESTONE INSPIRATION max. 20%
Transcript
ciot.com
Rév
isé
2018
-12-
13
ciot.com
TECHNICAL INFORMATION
MARVEL STONE - NEW PRODUCT Release - 2017-03-27 - page 1
APPLICATIONSMarvel Stone is ideal for an interior and exterior application on floors and walls in your residential and commercial projects.
WATERABSORPTION
FROSTRESISTANCE
MOHSHARDNESS
CHEMICALRESISTANCE
STAINRESISTANCE
ISO 10545/3 ISO 10545/12 EN 101 ISO 10545/13 ISO 10545/14
≤ 0,1 % RESISTANTNAT.: CONFORM
LAP.: 5STR.: 8
NAT.: UA ULA UHALAP.: UA ULA
STR.: UA ULA UHACLASS 5
VALE
URS
NO
RMES
DIN51130-DIN51097
D.C.O.F.ANSI 137.1-2012
(›0,42)
SLIPRESISTANCE
INSTALLATION AND MAINTENANCEIt is suggested to lay tiles with a joint of 2-3 mm. Use high quality adhesive and grout from a manufacturer such as Mapei,following manufacturer’s recommendations and depending on site conditions. It is recommended that you lay the rectangular formats side by side or offset by 20%. Fixing in a 50% staggered configuration is not advised. As soon as the joints have fully set, it is advisable to proceed to the initial post-construction cleaning as described by the manufacturer. Daily maintenance can be performed with a neutral detergent.
NAT.:R9 ALAP.: —STR.: R11 A+B+C
NAT.: CONFORMSTR.: CONFORMLAP.: NOT CONFORM
NEW PRODUCTCOLORED BODY PORCELAIN STONEWARE
R11 V3
FORMATS (Rectified monocaliber tiles)
NATUREL RT (NAT. RT): 30 x 60 cm | 45 x 90 cm | 60 x 60 cm | 75 x 75 cm | 75 x 150 cm | 120 x 120 cm | 120 x 240 cmSTRUTTURATO RT (STR. RT): 30 x 60 cmLASTRA 20 mm STRUTTURATO RT (STR. RT): 60 x 60 cm | 60 x 120 cm
DESCRIPTIONMarvel Stone - limestone inspiration by Atlas Concorde is a colored body porcelain stoneware collection that is inspired by the beauty and elegance of natural stone. Installed on floor and walls, Marvel Stone will give a contemporary look and great impact to your design. Pavers 20 mm thick will complement greatly your outdoor living space.
COLORS
CLAUZETTO WHITEV3V3
DESERT BEIGEV2
CARDOSO ELEGANTV3
BASALTINA VOLCANOV2
MARVEL STONELIMESTONE INSPIRATION
max. 20%
ciot.com
Rév
isé
2018
-12-
13
DESCRIPTIONMarvel Stone Wall - limestone inspiration by Atlas Concorde is a selection of white body wall tiles inspired by natural stone. Marvel Stone Wall will bring character and a beautiful natural look to your spaces.
APPLICATIONSMarvel Stone Wall is suitable for interior walls, in your residential and commercial projects.
MARVEL STONE - NEW PRODUCT Release - 2017-03-27 - page 2
INSTALLATION AND MAINTENANCEIt is suggested to lay tiles with a joint of 3 mm. Use high quality adhesive and grout from a manufacturer such as Mapei, following manufacturer’s recommendations and depending on site conditions. It is recommended that you lay the rectangular formats side by side or offset by 20%. Fixing in a 50% staggered configuration is not advised. As soon as the joints have fully set, it is advisable to proceed to the initial post-construction cleaning. It is recommended to proceed to initial cleaning with a neutral pH detergent. Daily maintenance can be performed with a neutral detergent.
COLORS
TECHNICAL INFORMATION
WATERABSORPTION
FROSTRESISTANCE
BENDINGSTRENGTH
CHEMICALRESISTANCE
STAINRESISTANCE
ISO 10545/12 R ≥ 15 N / mm2 ISO 10545/13 ISO 10545/14
VALU
ESN
ORM
S
10 to 20 % NON RESISTANT S ≥ 600 N
R ≥ 15 N/mm2 GA GLA GHA CLASS 5
ISO 10545/3≤ 0,5 %
RECYCLEDCONTENT
MR4 CREDITS
PRE-CONS.: ≤ 20 %
NEW PRODUCTWHITE BODY WALL TILE
FORMATS (Rectified monocaliber tiles)
MATT RT : 40 x 80 cm | 50 x 110 cm
MARVEL STONE WALLLIMESTONE INSPIRATION
CLAUZETTO WHITEV3V3
DESERT BEIGEV2
CARDOSO ELEGANTV3
V3
max. 20%
ciot.com
Rév
isé
2018
-12-
13
ciot.com
TECHNICAL INFORMATION
MARVEL STONE - NEW PRODUCT Release - 2017-03-27 - page 3
APPLICATIONSMarvel Stone is ideal for an interior and exterior application on floors and walls in your residential and commercial projects.
INSTALLATION AND MAINTENANCEIt is suggested to lay tiles with a joint of 2-3 mm. Use high quality adhesive and grout from a manufacturer such as Mapei,following manufacturer’s recommendations and depending on site conditions. It is recommended that you lay the tiles side by side or offset by 20%. Fixing in a 50% staggered configuration is not advised. As soon as the joints have fully set, it is advisable to proceed to the initial post-construction cleaning as described by the manufacturer. Daily maintenance can be performed with a neutral detergent.
WATERABSORPTION
FROSTRESISTANCE
MOHSHARDNESS
CHEMICALRESISTANCE
STAINRESISTANCE
ISO 10545/3 ISO 10545/12 EN 101 ISO 10545/13 ISO 10545/14
≤ 0,1 % RESISTANT NAT.: CONFORMLAP.: 5
NAT.: UA ULA UHALAP.: UA ULA CLASS 5
VALE
URS
NO
RMES
DIN51130-DIN51097
D.C.O.F.ANSI 137.1-2012
(›0,42)
SLIPRESISTANCE
NAT.:R9 ALAP.: —
NAT.: CONFORMLAP.: NOT CONFORM
NEW PRODUCTCOLORED BODY PORCELAIN STONEWARE
R11 V3
FORMATS (Rectified monocaliber tiles)
NATUREL RT (NAT. RT): 30 x 60 cm | 45 x 90 cm | 60 x 60 cm LAPPATO RT (LAP. RT): 30 x 60 cm | 45 x 90 cm | 60 x 60 cm | 75 x 75 cm | 75 x 150 cm | 120 x 120 cm | 120 x 240 cm | 120x278 cm
DESCRIPTIONMarvel Stone - marble inspiration by Atlas Concorde is a colored body porcelain stoneware collection which includes a selection of tiles inspired by the elegance and luxurious appearance of marble. Installed on floor and walls, Marvel Stone is ideal for creating sophisticated atmospheres that will have great visual impact.
COLORS
MARVEL STONE
CARRARA PUREV3
BIANCO DOLOMITEV2
CREAM PRESTIGEV2
BARDIGLIO GREYV3
NERO MARQUINAV2MARBLE INSPIRATION
max. 20%
ciot.com
Rév
isé
2018
-12-
13
DESCRIPTIONMarvel Stone Wall - marble inspiration by Atlas Concorde is a selection of white body wall tiles which includes a selection of tiles reproducing the refinement of marble . Applied on walls, Marvel Stone Wall will bring a sophisticated look and luxury to your spaces.
APPLICATIONSMarvel Stone Wall is suitable for interior walls, in your residential and commercial projects.
MARVEL STONE - NEW PRODUCT Release - 2017-03-27 - page 4
INSTALLATION AND MAINTENANCEIt is suggested to lay tiles with a joint of 3 mm. Use high quality adhesive and grout from a manufacturer such as Mapei, following manufacturer’s recommendations and depending on site conditions. It is recommended that you lay the tiles side by side or offset by 20%. Fixing in a 50% staggered configuration is not advised. As soon as the joints have fully set, it is advisable to proceed to the initial post-construction cleaning. It is recommended to proceed to initial cleaning with a neutral pH detergent. Daily maintenance can be performed with a neutral detergent.
TECHNICAL INFORMATION
WATERABSORPTION
FROSTRESISTANCE
BENDINGSTRENGTH
CHEMICALRESISTANCE
STAINRESISTANCE
ISO 10545/12 R ≥ 15 N / mm2 ISO 10545/13 ISO 10545/14
VALU
ESN
ORM
S
10 to 20 % NON RESISTANT S ≥ 600 N
R ≥ 15 N/mm2 GA GLA GHA CLASS 5
ISO 10545/3≤ 0,5 %
RECYCLEDCONTENT
MR4 CREDITS
PRE-CONS.: ≤ 20 %
NEW PRODUCTWHITE BODY WALL TILE
FORMATS (Rectified monocaliber tiles)LUCIDO RT (LUC. RT) : 40 x 80 cm | 50 x 110 cm
V3
COLORS
MARVEL STONE WALL
CARRARA PUREV3
BIANCO DOLOMITEV2
CREAM PRESTIGEV2
BARDIGLIO GREYV3
NERO MARQUINAV2MARBLE INSPIRATION
max. 20%
ciot.com
Rév
isé
2018
-12-
13
MARVEL STONE - NEW PRODUCT Release - 2017-03-27 - page 5
Decors, special pieces and several mosaics available, ask your Ciot representative.THICKNESS:MARVEL STONE : 6 mm, 9mm
29½x29½, 29½x59: 10 mm MARVEL STONE WALL : 8,5 mmLASTRA 20 mm: 20 mm
AVAILABILITY ¹
stock
special order
N/A not available
¹ Subject to changeMade in Italy
In the event of discrepancy with the official information of the manufacturer, the latter shall prevail.
(1)Recycled Content: The PRE and POST values indicate the origin of the materials used in the production of this product (Pre-consumer and Post-consumer). Please consult the manufacturer’s Recycled Content document to learn more about this and other LEED® compliant products.
Low --------------------------> High
SHADE VARIATION ENVIRONMENTFROST
Interior Exterior Wall Floor Paver Residential
APPLICATION USE SLIP RESISTANCE
Low ----------------------------> High
ICONS LEGEND
Commercial Industrial
V1 V2 V3 V4
Frost resistant
Ecolabelnorm
R10 R11 R12R9
LEEDTM
norm
MARVEL STONECOLORED BODY PORCELAIN STONEWARE
WHITE BODY WALL TILE
R11 V3
MARVEL STONE WALL
MARVEL STONE
V3
WALL
IMPERIAL (NOMINAL)
METRIC (NOMINAL)
12 x 10"
30.5 x 25 cm
LUC. RT
CHEVRON COLD
CHEVRON MIX
CHEVRON WARM
ZOOM
3.4
cm
17.5 cm
WALL
16 x 32" 20 x 43½"
50 x 110 cm40 x 80 cm
LUC. RT LUC. RTMATT RT MATT RT
N/A
N/A N/A
N/A N/A
N/A N/A
N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
IMPERIAL (NOMINAL)
METRIC (NOMINAL)
24 x 24" 24 x 47¼"
60 x 60 cm 60 x 120 cm
STR. RT STR. RT
BASALTINA VOLCANO
20 MM20 MM
PLANCHER
CARDOSO ELEGANT
CLAUZETTO WHITE
DESERT BEIGE
N/A
N/A
N/A
N/A
6 mm
METRIC (NOMINAL) 30 x 60 cm 60 x 60 cm 45 x 90 cm 75 x 75 cm 75 x 150 cm 120 x 120 cm 120 x 240 cm 120 x 278 cmIMPERIAL (NOMINAL) 12 x 24" 24 x 24" 17¾ x 35½" 30 x 30" 29½ x 59" 47¼ x 47¼" 47¼ x 94½" 47¼ x 109½"
