29 years s i n ce 1 9 8 9 Weaver Distributing - Where quality is not a question ! 14 •3,500 lb GTW/350 TW (limited to 85% of your receiver hitch rating) •Length is measured from center of pin hole to center of pin hole. • 5 / 8" and ½" pins sold separately •HB560/HB559- labeled not for towing, designed for accessories. •HB580- Adapts from 1¼" receiver to 2" accessory. 3,500 GTW/350 TW (limited to 85% of your receiver rating) HB560 1¼" receiver to 2" accessory, 6" long $ 24. 95 HB559 1¼" receiver to 2" accessory, 10" long $ 46. 95 HB580 1¼" receiver to 2" accessory, 5" rise, 6½" long $ 67. 95 Receiver Adapters & Extensions HB560 •Fits standard 2" receivers. Uses 5 / 8" pins. •Length is measured from pin hole to pin hole. •Reduces the weight capacity of your receiver hitch by 1 / 3 with a 3,500/350 lb limit. HAX072 7" receiver extension $ 34. 95 HAX122 12" receiver extension $ 42. 95 HAX18 18" receiver extension $ 55. 95 HAX079 1¼" receiver, 7" receiver extension, Not for towing $ 28. 95 Receiver Tube Extenders HARA24 HB561 1¼" To 2" Adapters HB580 •Requires 5 / 8 " long pin #HARPL (not included) •HARA24: Now has tabs to keep sleeve from sliding into receiver •HARA25: Only needs 3" from center of pin hole to ball mount gusset •HARA27: Requires 3 5 / 8" from center of pin hole to ball mount gusset HARA24 2½" receiver to 2" accessory, sleeve bushing type $ 17. 95 HARA25 2½" receiver to 2" accessory, bushing w/collar $ 24. 95 HARA27 2½" receiver to 2" accessory, bushing w/collar $ 32. 95 HARPL 5 / 8" pin, 4" usable length, with lynch $ 2. 49 2½" To 2" Adapters •3,500 GTW/350 TW (limited to 85% of your receiver hitch rating) •Length is measured from center of pin hole to center of pin hole. • 5 / 8" and ½" pins sold separately HB561 2" receiver to 1¼" accessory, 4" long $ 24. 95 HB562 2" receiver to 1¼" accessory, 9½" long $ 29. 95 2" To 1¼" Adapters •Requires 5 / 8 " long pin #HARPL3 (not included) HARA32 3" receiver to 2" accessory, bushing w/ collar $ 34. 95 HARA325 3" receiver to 2½" accessory, sleeve bushing type $ 24. 95 HARPL3 5 / 8" pin, 4" usable length, with lynch $ 4. 95 3" Adapters HARA27 3 5 / 8 " HARA325 HARA32 HARA25 HARA24 end view showing positioning tabs New! New! •HAX005- Receiver capacity 500 lb, ball tongue capacity 750 lb, Never exceed 750 lb total. 12" from pin hole to ball hole •HAX004- 3,500 GTW/ 350 TW, 4¼" Rise, 5¼" Length •HAX006- 4,000 GTW/ 400 TW, 12" Length HAX005 2" receiver, Multi-purpose ball mount $ 59. 95 HAX004 2" receiver, Rise extension $ 64. 95 HAX006 2" receiver, Dual receiver extension $ 71. 95 Multi-purpose Extensions HAX005 HAX006 HAX004
Transcript
29years
since 1989
Weaver Distributing - Where quality is not a question !14
•3,500 lb GTW/350 TW (limited to 85% of your receiver hitch rating)•Length is measured from center of pin hole to center of pin hole.•5/8" and ½" pins sold separately•HB560/HB559- labeled not for towing, designed for accessories.•HB580- Adapts from 1¼" receiver to 2" accessory. 3,500 GTW/350 TW (limited to 85% of your receiver rating)
HB560 1¼" receiver to 2" accessory, 6" long $24.95
HB559 1¼" receiver to 2" accessory, 10" long $46.95
HB580 1¼" receiver to 2" accessory, 5" rise, 6½" long $67.95
Receiver Adapters & Extensions
HB560
•Fits standard 2" receivers. Uses 5/8" pins. •Length is measured from pin hole to pin hole. •Reduces the weight capacity of your receiver hitch by 1/3 with a 3,500/350 lb limit.
HAX072 7" receiver extension $34.95
HAX122 12" receiver extension $42.95
HAX18 18" receiver extension $55.95
HAX079 1¼" receiver, 7" receiver extension, Not for towing $28.95
Receiver Tube Extenders
HARA24
HB561
1¼" To 2" Adapters
HB580•Requires 5/8
" long pin #HARPL (not included)•HARA24: Now has tabs to keep sleeve from sliding into receiver•HARA25: Only needs 3" from center of pin hole to ball mount gusset•HARA27: Requires 35/8" from center of pin hole to ball mount gusset
HARA24 2½" receiver to 2" accessory, sleeve bushing type $17.95
HARA25 2½" receiver to 2" accessory, bushing w/collar $24.95
HARA27 2½" receiver to 2" accessory, bushing w/collar $32.95
HARPL 5/8" pin, 4" usable length, with lynch $2.49
2½" To 2" Adapters
•3,500 GTW/350 TW (limited to 85% of your receiver hitch rating)•Length is measured from center of pin hole to center of pin hole.•5/8" and ½" pins sold separately
HB561 2" receiver to 1¼" accessory, 4" long $24.95
HB562 2" receiver to 1¼" accessory, 9½" long $29.95
2" To 1¼" Adapters
•Requires 5/8" long pin #HARPL3 (not included)
HARA32 3" receiver to 2" accessory, bushing w/ collar $34.95
HARA325 3" receiver to 2½" accessory, sleeve bushing type $24.95
HARPL3 5/8" pin, 4" usable length, with lynch $4.95
151-800-WEAVER-D (800-932-8373) Email: [email protected] Spring 2018
Use these solid steel hitch bars to manufacture your own ball mount. Fits into class 3, 4, or 5 receiver hitches. 5/8" pin hole is pre-drilled.
HAHB12S 12" long, 2" square solid bar $33.95
HAHB18S 18" long, 2" square solid bar $49.95
HAHB24S 24" long, 2" square solid bar $62.95
HAHBS10 10" long, 1¼" square solid bar $19.95
HAHBS10-Fits into class 1 & 2 receiver hitches,½" pin hole is pre-drilled
These tubes come with a pre-drilled pin hole and reinforcing collar. The pin hole end is “broached out” to industry standard sizes. Accepts all standard 2" ball mounts.
•Maximum bumper size: 4" by 4"•3,500/350 lb rating•For use on square channel bumpers on the rear of many RV's•Never exceed your bumper's gross towing weight
HABBRV RV bumper box $68.95
These bumper mounted receiver hitches bolt to OEM formed steel step bumpers. Standard 2" square receiver opening. Baked on powder coating. Safety chain hookup provided. 5/8" pin hole size.
HABBGM Fits GM 88-98 full size pickups $64.95
HABBD Fits Dodge 94-02 full size pickups $89.95
Custom Bumper Boxes
HABBGMHABBD
Fits most step bumpers with a flat mounting surface on bottom. Mounting hardware is included. 2" square receiver. Baked on black powder coating for beauty and durability. Safety chain hookup provided. 5/8" pin hole.
HABB 8½" wide bolt hole spacing $54.95
Universal Bumper Box
RV Bumper Box
Note: Use of bike rack on rear of 5th wheel
camper or trailer is not recommended and in most cases will void
the warranty!
Tubing & Bumper Boxes
•2" ID square x 6" long receiver tube with 5/8" pin hole•½" thick steel mounting plate •33/8" side to side and 3½" top to bottom ½" bolt hole pattern•Cast steel collar and a black powder coat finish.
Weaver Distributing - Where quality is not a question !16
Receiver Covers & Steps
HACWD: Black plastic receiver cover with Weaver-D logo & numberHACN12/20: Black plastic smooth coverHAPN20: Black plastic smooth plug
HACWD 2" plastic receiver coverFree w/ $100 order (upon request)
$1.79
HACWZ Plastic clip, cover retainer $0.39
HACN12 Fits 1¼" receiver $2.99
HACN20 Fits 2" receiver $2.99
HAPN20 2" receiver plug, no pin needed $1.49
The heavy duty chrome plated metal cover has a gasket to seal off dirt and moisture, keeping your receiver tube dry and clean. Secure in receiver with appropriate pin and clip.
HACC12 For 1¼" receiver $7.95
HACC20 For 2" receiver $13.95
HACCP For 2" receiver, chrome plastic w/o gasket $5.99
This cover will always be with your hitch. Simply slip the strap around your 2" square receiver tube, and you’re covered. Strap also holds your 4 way flat plug.
ITEM# Description 1-2 ea 3+ eaHACB2 Rubber cover $7.99 $6.99
Chrome Receiver Covers
Black Rubber Cover
Plastic Covers
HACC20 HACCP
HACN12/20HACWD
•Fits standard 2" receivers•Plugs into your 4 way flat trailer plug.
HEHL Hitch light $24.95
Hitch Light
HAS4015
Receiver Extension With Step
•Black powder coat finish•HAS4015- 6"x17" welded steel step with diamond tread. Extends your receiver by 12". Reduces hitch capacity by 1/3.
HAS4000 Hitch step, 10¾" wide x 6¼" deep $65.95
HAS4015 12" Receiver extension with step $64.95
HAS4000
Reflective Hitch Step
•Fits 2" receivers•Approximately 3" x 5" step size•Provides easy access to rear of vehicle•Non-slip surface, folds up when not in use•Heavy duty, holds up to 650 lb
HAS060 Reflective Hitch Step $49.95
Gen-Y Hitch Step
•Fits 2" receivers•Serrated zero-slip surface•Heavy duty, holds up to 300 lb
HAS035 Heavy Duty Hitch Step $89.95
New!
Mega Step
•Fits 2" receivers•Large 14" x 5" step size•Can be mounted to flat surface•Provides easy access to engine compartment or truck bed•Non-slip surface, folds up when not in use•Heavy duty, holds up to 500 lb
HAS070 Mega Step $169.95
HAPN20
29years
since 1989
171-800-WEAVER-D (800-932-8373) Email: [email protected] Spring 2018
HATGS991 HATGS990
HATGS100
HATGS040- Hold up to 100 lb of free flowing materials: seed, feed, fertilizer, etc. Poly hopper, HD sealed 12V motor plugs into the ATV's accessory plug. Durable plastic rain cover included HATGS100- Holds 1.5 cu ft/100 lb of bagged salt, sand, or other free flowing materials. Powder coated steel frame with stainless steel axle, agitator shaft, and linkage. 1-piece fully welded frame with 13” pneumatic tires. 3-flap adjustable deflector for sidewalks or near sensitive foliage, etc. Durable plastic rain cover included.
HATGS040 ATV Spreader, 12V motor $209.00
HATGS100 Walk behind spreader $209.00
Walk Behind & ATV
HATGS040
HATGS060
HATGS070
HATGS000
Standard Commercial
•Variable speed in-cab electronic spreader control panel•80 lb vibrator sealed in hopper for extra protection•Manual open/close gate with gravity feed•Fits class 4 or heavier, 2” receiver hitchAll Models-Freight extra to zone A/B/C: $59/79/99
HATGS060 10 cu ft 750 lb 3-30 ft. spread $1,199.00
HATGS000- •Plugs into cigarette lighter with in-cab on/off switch•4.4 cu. ft, 331 lb, 12-14 ft spread•Manual open/close gate with gravity feed•Folds down for opening tailgate or rear doorHATGS010- •In-cab electronic spreader control panel•4.4 cu ft, 331 lb, up to 30 ft spread•Gravity feed with internal auger assistAll Models-Freight extra to zone A/B/C: $59/79/99
HATGS000 Spinner Spreader, 2" or 1¼" receiver $519.00
HATGS010 Pro Model Spinner Spreader, 2" receiver $739.00
Combines the robustness of an auger-driven V-box spreader with the simplicity and easy mounting of a tailgate spreader. Open auger design gives contractors the option to spread a variety of materials typically limited to V-box spreaders.•Variable speed in-cab spreader control box with vibrator switch•Horizontal auger feed mechanism•Fits class 4 or heavier, 2” receiver hitch•Horizontal and vertical height adjustmentHATGS020-prewired for optional vibrator kit #3028195HATGS0030-optional vibrator available #3020340 HATGS070- Built in vibrator for stubborn materialAll Models- Freight extra to zone A/B/C: $59/79/99
HATGS020 3 cu ft 225 lb 3-30 ft spread $849.00
HATGS030 8 cu ft 600 lb 3-30 ft spread $1,349.00
HATGS070 11 cu ft 825 lb 3-30 ft spread $1,691.00
Auger Box
Control Panel
HATGS030
Salt Spreaders
HATGS010
Residential & Light Commercial Premium Commercial
Replacement Spreader Parts
HATGS990 Replacement motor for HATGS000 $152.00
HATGS991 Replacement motor for HATGS010 $257.00
HATGS998 Controller for all models except HATGS000 $306.00
HATGS998
Free Shipping!
Zone A
29years
since 1989
Weaver Distributing - Where quality is not a question !18
Steel Ramps
•Aluminum arched construction •12" wide x 90" long•Center fold for easy storage •1,500 lb rated as pair•Includes safety straps •Extra-wide non-slip cross members
MARA500 Aluminum Loading Ramp, pair $239.95
The Mobile-Lift offers you the ultimate in quiet convenience and independence. Simply drive scooter or wheelchair on, attach the safety harness, and push the switch. Raises & locks scooter in place in just 60 seconds. Folds up out of the way when not in use or folds down for access to rear of vehicle. Includes 2 lights for evening use, a DOT approved brake light to ensure safety & an emergency handle in case of battery failure. Aluminum platform is lightweight and maintenance free. (80 lb weight) Allow 2 weeks for delivery. •HHSH400- 26 x 45¾" overall width & length, tray is 26 x 40•HHSH405- 30 x 57" overall width & length, tray is 30 x 50
•Constructed of aluminum, rated to 400 lb•Folds so rack can be stored behind vehicle•Anti-Skid surface prevents slipping when wet•Fits standard 2" receiver hitches•Anti-wobble stabilizing hitch pin•Freight extra to zone A/B/C = $59/$79/$99
HHSH309 50" long, 30¼" wide, 4" high $369.00
The Solo Cargo Carrier
•400 lb capacity •Fits standard 2" receiver hitches•Hitch pin included•Convenient attachment points to relocate license plate•Bracket supports ramp in vertical position for transportation.
HHSH200 Cargo Rack, 48" x 32" x 3" $169.00
HHSH201 Folding ramp for HHSH200, 44" x 30" $125.00
HHSH200
HHSH201
Free Shipping!
Zone A
•1-piece steel construction•Includes safety straps•Solid-plate surface with raised traction cut-outs•9" x 84", 1,000 lb rated per pair
MARA514 Steel Loading Ramp, pair $123.95
Aluminum Ramps
29years
since 1989
191-800-WEAVER-D (800-932-8373) Email: [email protected] Spring 2018
HH802
•20" wide, 60" long, and 2.75" high•Fits standard 2" receiver (includes pin & clip)•500 lb capacity•Rear of receiver tube must be at least flush with bumper
HH122 Steel, black powder coat, Weighs 35 lb $109.95
HH224 Aluminum, Weighs 28 lb $129.95
Cargo Carriers
HH200/HH208 -12 tie down holes, 500 lb capacityHH210- 500 lb capacity w/ 2" receiver, 300 lb capacity w/ 1¼" receiver
HH200 19¼" x 60", fits standard 2" receiver $94.95
HH208 231/8" x 60", fits standard 2" receiver $102.95
HAT08 24" x 60" x 5.5" Bolt-together, 2" receiver $153.95
HAT09 24" x 60" x 5.5" 1-piece welded, 2" receiverFreight extra to zone A/B/C = $59/$79/$99
$203.00
HH211 20" x 48" x 6" bolt-together, 1¼" receiver $139.95
HH212 20" x 48" x 6" 1-piece welded, 1¼" receiver $164.95
Large Basket Cargo Carriers
Folding Cargo Carriers
Cargo Rack Accessories
HH804
HH804 Cargo net, 12 hooks, fits most 19¼" x 60" carriers $15.95
HH802 Rain-proof cargo bag, fits 60" x 24" racks, 6 straps for secure attachment, 20 cu. ft.
$78.95
HH200
ROLA® Adventure System
•Fits standard 2" receiver (includes pin & clip)•Pod can be removed for tray-only use•Tray tilts up for storing behind vehicle. •Integrated stop/tail/turn lights with 4-flat plug•250 lb capacity•13 cubic feet of storage in the pod.•Overall exterior: 52.5" long, 27" wide, and 21" high•LTL Freight extra to zone A/B/C = $59/$79/$99, see pg. 158
HAT052 Adventure System cargo rack $679.00
HH122
HH224
29years
since 1989
Weaver Distributing - Where quality is not a question !20
Bike Racks
Tilt Bike Carriers
•Soft cradles protect bike paint•Two Velcro straps secure each bike•Tilt down for access to trunks, rear doors, hatches.
HB203 2 Bike Rack, fits 1¼" receivers $109.95
HB303 3 Bike Rack, fits 1¼" or 2" receivers $149.95
HB403 4 Bike Rack, fits 2" receivers, includes anti-rattle device/hitch pin
$152.95
HAAR32 Anti-rattle Locking Pin for HB403 $26.95
Tilt Tow-Behind 4 Bike Rack
•Carry up to four bikes and tow a trailer at the same time! •3,500 lb towing capacity (ball sold separately)•Tilt down for access to trunks, rear doors, hatches.•Folds compactly when not in use •Rubber Straps (not clamp plate) fit most larger bike frames•Includes anti-rattle device/hitch pin
HB400TF 4 Bike Rack, fits 2" receiver $130.95
HB539 Replacement rubber strap for HB400TF $2.99
folded
Slide-Over Tilt 3 Bike Carrier
•Transports up to 3 bikes•Quick loading & unloading of your bikes•Slides OVER 2" Receiver bar (not included)•Tilt down for access to trunks, rear doors, hatches.
HB322 3 Bike Rack, slides over 2" receiver bar $119.95
Deluxe Tilt Bike Carriers
•No need for a Ladies bike adapter•Tilt down for access to trunks, rear doors, hatches.•Comes with a locking knob for added security•Soft vinyl cushions are grooved for brake cables•Adjustable, independent clamps for each bike accommodates most styles of bikes (up to 2" diameter cross bar)•Soft cradles on clamps hold bikes securely in place•Includes anti-rattle device/hitch pin
HB325 3 Bike Rack, fits 1¼" & 2" receivers $166.95
HB425 4 Bike Rack, fits 1¼" & 2" receivers $229.95
HB496 5 Bike Rack, fits 2" receivers $259.95
HAAR31 Anti-rattle Locking Pin for HB325/425 $26.95
HAAR32 Anti-rattle Locking Pin for HB496 $26.95
HB425HB403
HB203
HB303
HB325
HB496
Note: Use of bike rack on rear of 5th wheel camper or trailer is not recommended & in most cases will void the warranty! (Except HB200) 14" minimum recommended ground clearance for all bike
racks (except HB422, HB820 and HB830)
29years
since 1989
211-800-WEAVER-D (800-932-8373) Email: [email protected] Spring 2018
•Accommodates all styles of bikes•Ratcheting arms easily adjust to different size bike frames •Upright posts fold down allowing rack to fold up to back of vehicle•Easily folds for compact storage •Includes anti-rattle device/hitch pin
HB200 2 bike rack, fits 1¼" & 2" receivers $139.95
HB422 4 bike rack, fits 2" receivers $319.95
HAAR31 Anti-rattle Locking Pin for HB200 $26.95
HAAR32 Anti-rattle Locking Pin for HB422 $26.95
Platform Style Bike Carriers
HB200
HB422
Trunk Mount Bike Rack
•Fits most cars, vans, and SUV's•Arched support tubes to fit vehicles with spoilers•Sliding cradles for easier bike loading•Six straps provide stable and secure attachment to vehicle
HB830 3 Bike Trunk Mount Rack $89.95
Roof Top Bike Carrier
•Lockable system secures bike to rack•Tie down straps for wheels included•Universal mounting hardware fits round, square, and most factory OEM roof racks
HB820 Roof Top Bike Carrier $48.95
Platform Style 2 Or 4 Bike Carrier
•Accommodates all styles of bikes•Easily separates to be used as a 2 or 4 biker•Fits 1¼" or 2" when used as a 2 biker & 2" when used as 4 biker•Easily adjusts to different size bike frames by tightening knobs•Upright posts fold down when not carrying bikes•Easily folds for compact storage•Includes anti-rattle device/hitch pin
HB423 2 or 4 Bike Carrier $309.95
HAAR32 Anti-rattle Locking Pin for HB423 $26.95
Bike Racks
29years
since 1989
Weaver Distributing - Where quality is not a question !22
Bike Rack Accessories
HBBA
HALC60
HAAS22
•HBBA- Adjusts from 19-26", Fits up to 1¾" handle bar post and 1¼" seat post.•HALC60-Patented cinch lock holds cable tight at any position. Cut resistant 100% steel braided cable with vinyl sleeve. Weather Tough® aluminum alloy lock and cylinder shutter•HAAS22- Stabilizes hitch mounted bike racks. Vinyl coated hook prevents scratches on painted surfaces.
HBBA Ladies Bike Adapter $26.95
HB535 Replacement Locking Knob, 10mm $9.95
HALC60 6 foot 3/8 " cable lock $24.95
HAAS22 Strap with Quick Release Cam Buckle $9.95
HAAS22 in use
•For standard 2" ball mounts, cargo carriers, or bike racks•Will not fit solid steel ball mounts or accessories with welded nut in tube.
HAAR04 2" Locking Anti-rattle $21.95
Lock-Tite Anti-Rattle Pin
expanded view
Threaded Locking Anti-Rattle
•For use with accessories that have a nut welded inside the shank tube
HAAR32 2" Accessories, 5/8"-11 TPI threads $26.95
HAAR31 1¼" Accessories, ½"-12 TPI threads $26.95
Bike Rack Accessories
•Reduce draw bar & ball mount rattle while you drive
HAAR03 2" Heavy Duty Anti-rattle $19.95
HAAR08 1¼" Anti-rattle with set screw $19.95
Clamp Anti-Rattle Devices
HAAR03 in use
HAAR08
threaded spacer insertion
HAAR04
•Reduce draw bar & ball mount rattle while you drive
HAAR06 2" Tapered Anti-rattle with set screws $23.95
HAAR0625 2½" Tapered Anti-rattle with set screws $34.95
Gen-Y Wedge Anti-Rattle
HAAR06/0625 in use
Motor Bike Carrier
•Black powder coat finish•Steel platform and ramp •Easy to use loading ramp•Adjustable for large or small bikes
HH301 Fits into 2" receiver, up to 500lb total $169.95
Handy Retractable Ratchet StrapsSee page 47-48
29years
since 1989
231-800-WEAVER-D (800-932-8373) Email: [email protected] Spring 2018
•Quickly attaches to most vehicles•Two turbo racks can be used on a car•Simple strap-through design: no tools required•High density foam towers will not scratch roof•Extends approximately 36"-59" wide•Up to 100 lb capacity•Ideal for use with the EXTEND-A-TRUCK
HAETR Turbo Rack $49.95
Extend-A-Truck
Roof & Cargo Racks
Use 1 Extend-A-Truck to support long loads on your pickup bed or SUV floor.
Use 2 Extend-A-Trucks to support long loads over the roof of your SUV
•Installs or removes in seconds, and easily stores flat behind the seat.•Can be adjusted to your tail gate or roof height•Extends 50" from pin hole to center of vertical bar•Supports up to 350 lb, and is 4' wide•Includes pins & clips & red flag for on the end of long loads•Use foam kayak block HAETF to protect your kayak, canoe, etc.
HAET Extend-A-Truck for standard 2" receiver $99.00
HAETF Foam Block (each) $14.95
Turbo Rack
Rola Roof Racks
•Call for vehicle application•Allow up to 2 weeks shipping•More styles available!
MRR2899 RBU Series Crossbar, Chevy SUV/Minivan $308.95
MRR2834 APE Series Crossbar, Mazda, Mitsubishi $286.95
RBU SeriesRemovable universal design with extended bar length for vehicles with raised side rails.
APE SeriesRemovable design for vehicles with integrated anchor mounting points. Crossbars are fully lockable.
Foam block protects canoe
Step Gates
•Easy to install on your pickup tailgate•Quick release allows step and handle to be removed in seconds•Designed to help transport items safely and securely•Special step bracket anchors lumber, pipe or propane bottles•Single step unit can be used on either side of your tailgate•Double step includes a 2nd 13" hinged step which folds for storage.•Tested to accommodate up to 400 lb
HAS700 Step Gate, single step $89.95
HAS702R Step Gate, double step $124.95
HAS700 HAS702R
•Supports up to 600 lb•10½" x 33/8" pneumatic tires•17/8" chrome hitch ball with ¾" shank included
