135

REFERENCES

1. Ahn, S. and Chon, H. “The influence of metal ions on the synthesis ofMeAPO-5 (Me = Co, Mg) in the presence of acetate ions”, Micropor.Mater., Vol. 8, pp. 113-121, 1997.

2. Akolekar, D. B. “Catalytic properties and deactivation behaviour ofcrystalline microporous MAPO-36”, J. Catal., Vol. 144, pp.148-159,1993.

3. Akolekar, D. B. “Investigations on the CoAPO-36 molecular sieve”,Catal. Lett., Vol. 28, pp. 249-262, 1994.

4. Akolekar, D. B., Huang, M. and Kaliaguine, S. “Basic sites on acidicSAPO-5, MAPO-5 and MAPO-36 molecular sieves”, Zeolites,Vol. 14, pp. 519-522, 1994.

5. Alcántara, R., Canoira, L., Joao, P. G., Santos, J. M. and Vázquez, I.“Ethylbenzene oxidation with air catalysed by bis(acetylacetonate)nickel(II) and tetra-n-butylammonium tetrafluoroborate”, Appl. Catal.A: Gen., Vol. 203, pp. 259-268, 2000.

6. Anastas, P. T. and Warner, G. C. Green Chemistry: Theory andPractice, Oxford University Press, Oxford, p. 30, 1998.

7. Araujo, A. S., Diniz, J. C., Silva, A. O. S. and Melo, R. A. A.“Hydrothermal synthesis of cerium aluminophosphate”, J. AlloysCompd., Vol. 250, pp. 532-535, 1997.

8. Araujo, A. S., Aquino, J. M. F. B., Souza, M. J. B. and Silva, A. O. S.“Synthesis, characterization and catalytic application of cerium-modified MCM-41”, J. Solid State Chem., Vol. 171, pp. 371-374,2003.

9. Armor, J. N. “Striving for catalytically green processes in the 21st

century”, Appl. Catal. A: Gen., Vol. 189, pp. 153-162, 1999.

10. Arshadi, M. and Ghiaci, M. “Highly efficient solvent free oxidation ofethylbenzene using some recyclable catalysts: The role of linker incompetency of manganese nanocatalysts”, Appl. Catal. A: Gen.,Vol. 399, pp. 75-86, 2011.

136

11. Barrett, E. P., Joyner, L. G. and Halenda, P. P. “The determination ofpore volume and area distributions in porous substances.I. Computations from nitrogen isotherms”, J. Am. Chem. Soc., Vol. 73,pp. 373-380, 1951.

12. Batista, J., Kaucic, V., Rajic, N. and Stojakovic, D. “On the formationof CoAPSO-44”, Zeolites, Vol. 12, pp. 925-928, 1992.

13. Bauer, K., Garbe, D. and Surberg, H. Common Fragrance and FlavorMaterials, WHC, Vertagsgesellschaft, Weinheim, p. 83, 1990.

14. Bennett, J. M., Cohen, J. P., Flanigen, E. M., Pluth, J. J. and Smith, J. V.“Intrazeolite chemistry”, Am. Chem. Soc., Symp. Ser., Vol. 218,pp. 109-118, 1983.

15. Bennett, J. M., Dytrych, W. J., Pluth, J. J., Richardson, J. W. andSmith, J. V. “Structural features of aluminophosphate materials withAl/P = 1”, Zeolites, Vol. 6, pp. 349-360, 1986.

16. Bennett, J. M. and Marcus, B. K. “The crystal structures of severalmetal aluminophosphate molecular sieves”, Stud. Surf. Sci. Catal.,Vol. 37, pp. 269-279, 1988.

17. Bennur, T. H., Srinivas, D. and Sivasanker, S. “Oxidation ofethylbenzene over “neat” and zeolite-Y-encapsulated copper tri- andtetraaza macrocyclic complexes”, J. Mol. Catal. A: Chem., Vol. 207,pp. 163-171, 2004.

18. Berezin, I. V., Denisov, E. T. and Emanuel, N. M. Oxidation ofCyclohexane, Pergamon, New York, p. 66, 1968.

19. Bezouhanova, C. P. “Synthesis of aromatic ketones in the presence ofzeolite catalysts”, Appl. Catal. A: Gen., Vol. 229, pp. 127-133, 2002.

20. Blasco, T., Concepcion, P., Nieto, J. M. L. and Pariente, J. P.“Preparation, characterisation and catalytic properties of VAPO-5 forthe oxydehydrogenation of propane”, J. Catal., Vol. 152, pp. 1-17,1995.

21. Blasco, T., Concepcion, P., Grotz, P., Nieto, J. M. L. and Arias, A. M.“On the nature of V and Mg ions in V, Mg-containing AlPO4-5catalysts”, J. Mol. Catal. A: Gen., Vol. 162, pp. 267-273, 2000.

137

22. Boitsov, S., Riahi, A. and Muzart, J. “Chromium(VI) oxide-catalysedoxidations by tert-butylhydroperoxide using benzotrifluoride assolvent”, C. R. Acad. Sci., Ser. IIc: Chim., Vol. 3, pp. 747-750, 2000.

23. Bond, G. C., Gelsthorpe, M. R., Sing, K. S. W. and Theochairs, C. R.“Incorporation of zinc in an aluminophosphate microporous phase”,Chem. Commun., pp. 1056-1057, 1985.

24. Bragg, W. H. and Bragg, W. L. The Crystalline State, Vol. 1,McMillan, New York, 1949.

25. Brunauer, S., Emmett, P. H. and Teller, E. “Adsorption of gases inmulti molecular layers”, J. Am. Chem. Soc., Vol. 60, pp. 309-319,1938.

26. Burroughs, P., Hamnett, A., Orchard, A. F. and Thornton, G. “Satellitestructure in the X-ray photoelectron spectra of some binary and mixedoxides of lanthanum and cerium”, J. Chem. Soc., Dalton Trans.,Vol. 17, pp. 1686-1698, 1976.

27. Canesson, L. and Tuel, A. “Synthesis and characterization ofCoAPO4-39 molecular sieves”, Zeolites, Vol. 18, pp. 260-268, 1997.

28. Caps, V. and Tsang, S. C. “Structural and oxidative properties ofMn-MCM-41 catalysts synthesised by MOCVD method”, Catal.Today, Vol. 61, pp. 19-27, 2000.

29. Cavani, F. “Catalytic selective oxidation faces the sustainabilitychallenge: Turning points, objectives reached, old approaches revisitedand solutions still requiring further investigation”, J. Chem. Technol.Biotechnol., Vol. 85, pp. 1175-1183, 2010.

30. Chandalia, S. B. Oxidation of Hydrocarbons, 1st Ed., Sevak, Bombay,1977.

31. Chang, F., Li, W., Xia, F., Yan, Z., Xiong, J. and Wang, J. “Highlyselective oxidation of diphenylmethane to benzophenone overCo/MCM-41”, Chem. Lett., Vol. 34, pp. 1540-1541, 2005.

32. Cheetham, A. K., Férey, G. and Loiseau, T. “Open-frameworkinorganic materials”, Angew. Chem. Int. Ed., Vol. 38, pp. 3268-3292,1999.

138

33. Chen, J. D. and Sheldon, R. A. “Selective oxidation of hydrocarbonswith O2 over chromium aluminophosphate-5 molecular sieve”,J. Catal., Vol. 153, pp. 1-8, 1995.

34. Chen, J., Thomas, J. M. and Sankar, G. “IR spectroscopic study ofCD3CN adsorbed on ALPO-18 molecular sieve and the solid acidcatalysts SAPO-18 and MeAPO-18”, J. Chem. Soc., Faraday Trans.,Vol. 90, pp. 3455-3459, 1994.

35. Chen, J., Pang, W. and Xu, R. “Mixed-bonded open-frameworkaluminophosphates and related layered materials”, Top. Catal., Vol. 9,pp. 93-103, 1999.

36. Choudhary, V. R., Indurkar, J. R. and Narkhede, V. S. “MnO4-1

exchanged Mg-Al hydrotalcite: A stable and reusable/environmental-friendly catalyst for selective oxidation by oxygen of ethylbenzene toacetophenone and diphenylmethane to benzophenone”, J. Catal.,Vol. 227, pp. 257-261, 2004.

37. Clark, J. H., Kybett, A. P., Landon, P., Macquarrie, D. J. and Martin, K.“Catalytic oxidation of organic substrates using alumina supportedchromium and manganese”, J. Chem. Soc., Chem. Commun.,pp. 1355-1356, 1989.

38. Clark, J. H. “Catalysis for green chemistry”, Pure Appl. Chem.,Vol. 73, pp. 103-111, 2001.

39. Concepcion, P., Nieto, J. M. L., Mifsud, A. and Pariente, J. P.“Preparation and characterisation of Mg containing AFI and chabazite-type materials”, Zeolites, Vol. 16, pp. 56-64, 1996.

40. Concepcion, P., Nieto, J. M. L., Mifsud, A. and Pariente, J. P.“Synthesis, characterization and catalytic properties of microporousMgVAPO-5”, Appl. Catal. A: Gen., Vol. 151, pp. 373-392, 1997.

41. Corà, F. and Catlow, C. R. A. “Ionicity and framework stability ofcrystalline aluminophosphates”, J. Phys. Chem. B, Vol. 105,pp. 10278-10281, 2001.

42. Corma, A. “Inorganic solid acids and their use in acid catalyzedhydrocarbon reactions”, Chem. Rev., Vol. 95, pp. 559-614, 1995.

43. Davis, M. E., Saldarriaga, C., Montes, C., Garcer, J. and Cowder, C.“A molecular sieve with eighteen-membered rings”, Nature, Vol. 331,pp. 698-699, 1988.

139

44. Davis, M. E. and Lobo, R. F. “Zeolite and molecular sieve synthesis”,Chem. Mater., Vol. 4, pp. 756-768, 1992.

45. Devika, S., Palanichamy, M. and Murugesan, V. “Selective oxidationof ethylbenzene over CeAlPO-5”, Appl. Catal. A: Gen., Vol. 407,pp. 76-84, 2011.

46. Devika, S., Palanichamy, M. and Murugesan, V. “Vapour phaseoxidation of cyclohexane over CeAlPO-5 molecular sieves”, J. Mol.Catal. A: Chem., 2011a (doi:10.1016/j.molcata.2011.09.026).

47. De Klein, W. J., Mils, W. J. and De Jonge, C. R. H. Organic Synthesisby Oxidation with Metal Compounds, Plenum, New York, p. 261,1986.

48. Deng, F., Yue, Y., Xiao, T., Du, Y., Ye, Ch., An, L. and Wang, H.“Substitution of aluminum in aluminophosphate molecular sieve bymagnesium a combined NMR and XRD study”, J. Phys. Chem.,Vol. 99, pp. 6029-6035, 1995.

49. Duke, C. V. A., Hill, S. J. and Williams, C. D. J. “Synthesis ofMnAPO-20 and CoAPO-20 using tetrahedral metal species”,J. Chem. Soc., Chem. Commun., Vol. 26, p. 2633, 1994.

50. Dumitriu, E., Guimon, C., Hulea, V., Lutic, D. and Fechete, I.“Transalkylation of toluene with trimethylbenzenes catalyzed byvarious AFI catalysts”, Appl. Catal. A: Gen., Vol. 237, pp. 211-221,2002.

51. Elangovan, S. P., Krishnasamy, V. and Murugesan, V. “Synthesis,characterization and catalytic activity of ZAPO-5 and ZAPO-11”,Catal. Lett., Vol. 36, pp. 271-277, 1996.

52. Elangovan, S. P. and Murugesan, V. “Catalytic transformation ofcyclohexanol over aluminophosphate-based molecular sieves”,J. Mol. Catal. A: Chem., Vol. 118, pp. 301-309, 1997.

53. Ernst, S., Puppe, L. and Weitkamp, J. “Synthesis and characterizationof CoAPO and CoAPSO molecular sieves”, Stud. Surf. Sci. Catal.,Vol. 49, pp. 447-458, 1989.

54. Faith, W. L., Keyes, D. B. and Clark, R. L. Industrial Chemicals,2nd Ed., Wiley, New York, Vol. 347, p. 11, 1957.

140

55. Flanigen, E. M. Zeolite Chemistry and Catalysis, (Rabo J. A in Ed.),ACS Monograph 171, Washington D. C., p. 231-241, 1976.

56. Flanigen, E. M., Lok, B. M., Patton, R. L. and Wilson, S. T.“Aluminophosphate molecular sieves and the periodic table”,Stud. Surf. Sci. Catal., Vol. 28, pp. 103-112, 1986.

57. Flanigen, E. M., Patton, R. L. and Wilson, S. T., in Gorbert P. J. (Eds.),Innovation in Zeolite Material Science, Elsevier Amsterdam,pp. 13-27, 1988.

58. Floor, M., Kieboom, A. P. G. and van Bekkum, H. “Redox propertiesof cerium-exchanged Y-zeolites”, Recueil des travaux chimiques despays-bas, Vol. 108, pp. 128-132, 1989.

59. George, K. and Sugunan, S. “Nickel substituted copper chromitespinels: Preparation, characterization and catalytic activity in theoxidation reaction of ethylbenzene”, Catal. Commun., Vol. 9,pp. 2149-2153, 2008.

60. Gibbs, H. D. and Conover, C. “Process for the manufacture of pthalicanhydrid, pthalic acid, benzoic acid, and naphthaquinones”, US Patent,1284888, 1918.

61. Gielgens, L. H., Veenstra, I. H. E., Ponec, V., Haanepen, M. J. andvan Hooff, J. H. C. “Selective isomerisation of n-butene by crystallinealuminophosphates”, Catal. Lett., Vol. 32, pp. 195-203, 1995.

62. Girnus, I., Hoffmann, K., Marlow, F., Caro, J. and Doring, G.“Synthesis and characterization of titanium-pillared montmorillonites”,Micropor. Mater., Vol. 2, pp. 537-541, 1994.

63. Goldfarb, D. “MAS N.M.R and E.S.R studies of MnAPO-5”, Zeolites,Vol. 9, pp. 509-515, 1989.

64. Gorte, R. J., Kokotailo, G. T., Biaglow, A. I., Parrillo, D. and Pereira, C.“A study of acid sites in substituted AlPO-5”, Stud. Surf. Sci. Catal.,Vol. 69, pp. 181-187, 1991.

65. Gunduz, G. and Akpolat, O. “Catalytic vapour-phase oxidation oftoluene to benzaldehyde”, Ind. Eng. Chem. Res., Vol. 29, pp. 45-48,1990.

141

66. Hamoudi, S., Larachi, F. and Sayari, A. “Wet oxidation of phenolicsolutions over heterogeneous catalysts: Degradation profile andcatalyst behavior”, J. Catal., Vol. 177, pp. 247-258, 1998.

67. Hartmann, M., Prakash, A. M. and Kevan, L. “Multinuclear MASNMR study on the microporous aluminophosphates AlPO4-41 andSAPO-41”, J. Chem. Soc., Faraday Trans., Vol. 94, pp. 723-727, 1998.

68. Hartmann, M. and Kevan, L. “Transition-metal ions inaluminophosphate and silicoaluminophosphate molecular sieves:Location, interaction with adsorbates and catalytic properties”, Chem.Rev., Vol. 99, pp. 635-663, 1999.

69. Hartmann, M. and Kevan, L. “Substitution of transition metal ions intoaluminophosphates and silicoaluminophosphates: Characterisation andcatalytic studies and relation to catalysis”, Res. Chem. Intermed.,Vol. 28, pp. 625-695, 2002.

70. Hentit, H., Bachari, K., Ouali, M. S., Womes, M., Benaichouba, B. andJumas, J. C. “Alkylation of benzene and other aromatics by benzylchloride over iron-containing aluminophosphate molecular sieves”,J. Mol. Catal. A: Chem., Vol. 274, pp. 158-166, 2007.

71. Hill, C. L. “Homogeneous catalysis: Controlled green oxidation”,Nature, Vol. 401, pp. 436-437, 1999.

72. Hsu, B. Y. and Cheng, S. “Pinacol rearrangement overmetal-substituted aluminophosphate molecular sieves”, Micropor.Mesopor. Mater., Vol. 21, pp. 505-515, 1998.

73. Huang, Q. and Hwu, S. J. “Cs2Al2P2O9: An exception to Löwenstein’srule. Synthesis and characterization of a novel layeredaluminophosphate containing linear Al-O-Al linkages”, Chem.Commun., pp. 2343-2344, 1999.

74. Huo, Q., Xu, R., Li, S., Ma, Z., Thomas, J. M., Jones, R. H. andChippindale, A. M. “Synthesis and characterization of a novel extralarge ring of aluminophosphate JDF-20”, J. Chem. Soc., Chem.Commun., pp. 875-876, 1992.

75. Ishii, Y. and Sakaguchi, S. “Recent progress in aerobic oxidation ofhydrocarbons by N-hydroxyimides”, Catal. Today, Vol. 117, pp. 105-113,2006.

142

76. Jacob, B., Sugunan, S. and Singh, A. P. “Selective benzoylation ofo-xylene to 3,4-dimethylbenzophenone using various zeolite catalysts”,J. Mol. Catal. A: Chem., Vol. 139, pp. 43-53, 1999.

77. Jha, R. K., Shylesh, S., Bhoware, S. S. and Singh, A. P. “Oxidation ofethylbenzene and diphenylmethane over ordered mesoporousM-MCM-41 (M = Ti, V, Cr): Synthesis, characterization and structure-activity correlations”, Micropor. Mesopor. Mater., Vol. 95,pp. 154-163, 2006.

78. Kadgaonkar, M. D., Laha, S. C., Pandey, R. K., Kumar, P., Mirajkar, S. P.and Kumar, R. “Cerium-containing MCM-41 materials as selectiveacylation and alkylation catalysts”, Catal. Today, Vol. 97, pp. 225-231,2004.

79. Kanemoto, S., Saimoto, H., Oshima, K. and Nozaki, H. “Cr(III) orCe(IV) impregnated perfluorinated resin-sulfonic acid catalyst for theoxidation of alcohols”, Tetrahedron Lett., Vol. 25, pp. 3317-3320,1984.

80. Kanjina, W. and Trakarnpruk, W. “Oxidation of cyclohexane andethylbenzene by hydrogen peroxide over Co-substitutedheteropolytungstate catalyst”, J. Metals Mater. Mineral, Vol. 20,pp. 29-34, 2010.

81. Kanjina, W. and Trakarnpruk, W. “Mixed metal oxide catalysts for theselective oxidation of ethylbenzene to acetophenone”, Chin. Chem.Lett., Vol. 22, pp. 401-404, 2011.

82. Kannan, C., Elangovan, S. P., Palanichamy, M. and Murugesan, V.“Ethylation of toluene over aluminophosphate molecular sieves in thevapour phase”, Indian J. Chem. Technol., Vol. 5, pp. 65-68, 1998.

83. Katzmarzyk, A., Ernst, S., Weitkamp, J. and Knozinger, H.“The reduction/oxidation behaviour of MnAPO-5 as studied by ESRspectroscopy”, Catal. Lett., Vol. 9, pp. 85-90, 1991.

84. Kessler, H. “Synthesis, characterization and novel applications ofmolecular sieves materials”, in Mat. Res. Soc. Symp. Proc., Vol. 233,1991.

85. Khadilkar, B. M. and Borkar, S. D. “Synthesis of benzophenones usingsilica-gel supported Lewis acid catalyst”, Tetrahedron Lett., Vol. 38,pp. 1641-1642, 1997.

143

86. Kishore, D. and Rodrigues, A. E. “Liquid phase selective oxidation ofdiphenylmethane to benzophenone over ternary hydrotalcites withtert-butylhydroperoxide”, Catal. Commun., Vol. 10, pp. 1212-1215,2009.

87. Kreh, R. P., Spotnitz, R. M. and Lundquist, J. T. “Selective oxidationswith ceric methanesulfonate and ceric trifluoromethane-sulfonate”,Tetrahedron Lett., Vol. 28, pp. 1067-1068, 1987.

88. Kresge, C. T., Leonowicz, M. E., Roth, W. J., Vartulli, J. C. andBeck, J. S. “Ordered mesoporous molecular sieves synthesized by aliquid-crystal template mechanism”, Nature, Vol. 359, pp. 710-712,1992.

89. Kumar Ray, S. and Mukherjee, P. N. “Catalytic vapour phase oxidationof toluene to benzaldehyde”, Indian J. Technol., Vol. 21, pp. 137-142,1983.

90. Laha, S. C., Mukherjee, P., Sainkar, S. R. and Kumar, R. “Ceriumcontaining MCM-41-Type mesoporous materials and their acidic andredox catalytic properties”, J. Catal., Vol. 207, pp. 213-223, 2002.

91. Lechert, H., Wedya, H., Hess, M., Kleinworth, R., Penchev, V. andMinchev, C. “Crystallization of porous aluminophosphates and metalsubstitutions”, Stud. Surf. Sci. Catal., Vol. 69, pp. 145-155, 1991.

92. Levi, Z., Raitsimring, A. M. and Goldfarb, D. “ESR and electron spin-echo studies of MnAlPO-5”, J. Phys. Chem., Vol. 95, pp. 7830-7838,1991.

93. Lewis, D. W., Catlow, C. R. A. and Thomas, J. M. “Influence oforganic templates on the structure and on the concentration offramework metal ions in microporous aluminophosphate catalysts”,Chem. Mater., Vol. 8, pp. 1112-1118, 1996.

94. Li, F. B., Li, X. Z., Hou, M. F., Cheah, K. W. and Choy, W. C. H.“Enhanced photocatalytic activity of Ce3+-TiO2 for2-mercaptobenzothiazole degradation in aqueous suspension for odourcontrol”, Appl. Catal. A: Gen., Vol. 285, pp. 181-189, 2005.

95. Li, J., Li, X., Shi, Y., Mao, D. and Lu, G. “Selective oxidation ofcyclohexane by oxygen in a solvent-free system over lanthanide-containing AlPO-5”, Catal. Lett., Vol. 137, pp. 180-189, 2010.

144

96. Li, J., Shi, Y., Xu, L. and Lu, G. “Selective oxidation of cyclohexaneover transition-metal-incorporated HMS in a solvent-free system”,Ind. Eng. Chem. Res., Vol. 49, pp. 5392-5399, 2010.

97. Lightner, D. A. and Gurst, J. E. Organic Conformational Analysis andStereochemistry from Circular Dichroism Spectroscopy, John Wileyand Sons. Inc. 605 Third Avenue, New York, 2000.

98. Lin, S. S. and Weng, H. S. “Liquid-phase oxidation of cyclohexaneusing CoAPO-5 as the catalyst”, Appl. Catal. A: Gen., Vol. 105,pp. 289-308, 1993.

99. Lin, X. M., Li, L. P., Li, G. S. and Su, W. H. “Transport property andRaman spectra of nanocrystalline solid solutions Ce0.8Nd0.2O2 withdifferent particle size”, Mater. Chem. Phys., Vol. 69, pp. 236-240,2001.

100. Lohse, U., Noack, M. and Jahn, E. “Adsorption properties of thealuminium phosphate (AlPO-5) molecular sieve”, Adsorp. Sci.Technol., Vol. 3, pp. 19-24, 1987.

101. Lohse, U., Bruckner, A., Kintscher, K. and Parlitz, B. “Synthesis andcharacterization of VAPSO-44 and VAPSO-5”, J. Chem. Soc., FaradayTrans., Vol. 91, pp. 1173-1178, 1995.

102. Lohse, U., Parlitz, B., Miller, D., Schreier, E., Bertram, R. and Fricke,R. “MgAPO molecular sieves of CHA and AFI structure acidity andMg ordering”, Micropor. Mater., Vol. 12, pp. 39-49, 1997.

103. Lok, B. M., Cannan, T. R. and Messina, C. A. “The role of organicmolecules in molecular sieve synthesis”, Zeolites, Vol. 3, pp. 282-291,1983.

104. Lok, B. M., Messina, C. A., Patton, R. L., Gajek, R. T., Cannan, T. R.and Flanigen, E. M. “Silicoaluminophosphate molecular sieves:Another new class of microporous crystalline inorganic solids”, J. Am.Chem. Soc., Vol. 106, pp. 6092-6093, 1984.

105. Lok, B. M., Messina, C. A., Patton, R. L., Gajek, R. T., Cannan, T. R.and Flanigen, E. M. “Crystalline silicoaluminophosphates”, US Patent,4440871, 1984.

106. Lok, B. M., Marcus, B. K. and Flanigen, E. M. “Quinary and senarymolecular sieve compositions”, European Patent, 158350, 1985.

145

107. Lok, B. M., Marcus, B. K. and Flanigen, E. M. “Manganese-aluminium-phosphorous-silicon-oxide molecular sieves”, EuropeanPatent, 161490, 1985a.

108. Lok, B. M., Marcus, B. K. and Flanigen, E. M. “Cobalt-aluminium-phosphorous-silicon-oxide molecular sieves”, European Patent,161489, 1985c.

109. Lok, B. M., Vail, D. L. and Flanigen, E. M. “Zinc-aluminium-phosphorous-silicon-oxide molecular sieve compositions”, EuropeanPatent, 158975, 1985b.

110. Löwenstein, W. “The distribution of aluminium in the tetrahedra ofsilicates and aluminates”, Am. Mineral, Vol. 39, pp. 92-94, 1954.

111. Lu, C., Worrell, W. L., Gorte, R. J., Vohs, J. M. “SOFCs for directoxidation of hydrocarbon fuels with samaria-doped ceria electrolyte”,J. Electrochem. Soc., Vol. 150, pp. 354-358, 2003.

112. Lu, C., Fu, Z., Liu, Y., Liu, F., Wu, Y., Qin, J., He, X. and Yin, D.“A moderate and efficient method for oxidation of ethylbenzene withhydrogen peroxide catalyzed by 8-quinolinolato manganese(III)complexes”, J. Mol. Catal. A: Chem., Vol. 331, pp. 106-111, 2010.

113. Lü, G., Zhao, R., Qian, G., Qi, Y., Wang, X. and Suo, J. S. “Highlyef cient catalyst Au/MCM-41 for selective oxidation cyclohexaneusing oxygen”, Catal. Lett., Vol. 97, pp. 115-118, 2004.

114. Luna, F. J., Ukawa, S. E., Wallau, M. and Schuchardt, U.“Cyclohexane oxidation using transition metal-containingaluminophosphates (MAPO-VFI)”, J. Mol. Catal. A: Chem., Vol. 117,pp. 405-411, 1997.

115. Madhok, K. L. “Heterogeneous vapour phase oxidation and sorptiondesorption studies of toluene over Sn-Mo oxide catalyst”, Proceedings,5th International Symposium on Heterogeneous Catalysis, Varna,pp. 33-38, 1983.

116. Malherbe, R. R., Cordero, R. L., Morales, J. A. G.,Martinez, J. O. and Gracial, M. C. “A comparative study of MeAPOmolecular sieves with AFI structure type”, Zeolites, Vol. 13,pp. 481-484, 1993.

117. Mallawany, R., Sayed, A. H. and Gawad, M. M. H. A. “ESR andelectrical conductivity studies of (TeO2)0.95(CeO2)0.05 semiconductingglasses”, Mater. Chem. Phys., Vol. 41, pp. 87-91, 1995.

146

118. Marchese, L., Chen, J., Thomas, J. M., Coluccia, S. and Zecchina, A.“Brönsted, Lewis, and redox centers on CoAPO-18 catalysts.1. Vibrational modes of adsorbed water”, J. Phys. Chem., Vol. 98,pp. 13350-13356, 1994.

119. Mardani, H. R. and Golchoubian, H. “Selective and efficient C-Hoxidation of alkanes with hydrogen peroxide catalyzed by manganese(III) schiff base complex”, J. Mol. Catal. A: Chem., Vol. 259,pp. 197-200, 2006.

120. Messina, C. A., Lok, B. M. and Flanigen, E. M. “Crystallineferroaluminophosphates”, US Patent, 4544143, 1985.

121. Meusinger, J., Vinek, H. and Lercher, J. “Cracking of n-hexane andn-butane over SAPO-5, MgAPO-5 and CoAPO-5”, J. Mol. Catal.,Vol. 87, pp. 263-274, 1994.

122. Modén, B., Oliviero, L., Dakka, J., Santiesteban, J. G. and Iglesia, E.“Structural and functional characterization of redox Mn and Co sites inALPO materials and their role in alkane oxidation catalysis”, J. Phys.Chem. B, Vol. 108, pp. 5552-5563, 2004.

123. Modén, B., Zhan, B. Z., Dakka, J., Santiesteban, J. G. and Iglesia, E.“Kinetics and mechanism of cyclohexane oxidation on MnAPO-5catalysts”, J. Catal., Vol. 239, pp. 390-401, 2006.

124. Mohapatra, S. K. and Selvam, P. “Selective oxidation of cycloalkanesover iron-substituted hexagonal mesoporous aluminophosphatemolecular sieves”, Chem. Lett., Vol. 33, pp. 198-199, 2004.

125. Moises, A. C. and Vadim, V. G. “Synthesis of catalytic materials onmultiple length scales: From mesoporous to macroporous bulk mixedmetal oxides for selective oxidation of hydrocarbons”, Catal. Today,Vol. 99, pp. 137-142, 2005.

126. Molander, G. A. “Application of lanthanide reagents in organicsynthesis”, Chem. Rev., Vol. 92, pp. 29-68, 1992.

127. Montes, C., Davis, M. E., Murray, B. and Narayana, M. “Isolatedredox centers within microporous environments. 1. Cobalt-containingaluminophosphate molecular sieve five”, J. Phy. Chem., Vol. 94,pp. 6425-6430, 1990.

147

128. Mu, Z., Li, J. J., Tian, H., Hao, Z. P. and Qiao, S. Z. “Synthesis ofmesoporous Co/Ce-SBA-15 materials and their catalytic performancein the catalytic oxidation of benzene”, Mater. Res. Bull., Vol. 43,pp. 2599-2606, 2008.

129. Musser, M. T. Encyclopedia of Industrial Chemistry, (W. Gerhartz,Ed.), VCH, Weinheim, p. 217, 1987.

130. Nayak, V. S. “Chemisorption of nitrogen on ZSM-5 zeolite at hightemperature”, J. Phys. Chem., Vol. 96, pp. 8690-8692, 1992.

131. Norby, P. and Hanson, J. C. “Hydrothermal synthesis of themicroporous aluminophosphate CoAPO-5; in situ time-resolvedsynchrotron X-ray powder diffraction studies”, Catal. Today, Vol. 39,pp. 301-309, 1998.

132. Oliver, S., Kuperman, A. and Ozin, G. A. “A new model foraluminophosphate formation: Transformation of a linear chainaluminophosphate to chain, layer and framework structures”,Angew. Chem. Int. Ed., Vol. 37, pp. 46-62, 1998.

133. Oussaid, A. and Loupy, A. “Selective oxidation of arenes in dry mediaunder focused microwaves”, J. Chem. Res., Synop., Vol. 9,pp. 342-343, 1997.

134. Papadatos, K. and Shelstad, K. A. “Catalyst screening using a stoneD.T.A. apparataus: I. Oxidation of toluene over cobalt-metal oxidecatalysts”, J. Catal., Vol. 28, pp. 116-123, 1973.

135. Palacio, M., Villabrille P. I., Romanelli, G. P., Vázquez, P. G. andCáceres, C. V. “Ecofriendly liquid phase oxidation with hydrogenperoxide of 2,6-dimethylphenol to 2,6-dimethyl-1,4-benzoquinonecatalyzed by TiO2-CeO2 mixed xerogels”, Appl. Catal. A: Gen.,Vol. 359, pp. 62-68, 2009.

136. Parida, K. M. and Dash, S. S. “Manganese containing MCM-41:Synthesis, characterization and catalytic activity in the oxidation ofethylbenzene”, J. Mol. Catal. A: Chem., Vol. 306, pp. 54-61, 2009.

137. Park, S., Cracium, R., Vohs, J. M. and Gorte, R. J. “Direct oxidation ofhydrocarbons in a solid oxide fuel cell: I. Methane oxidation”,J. Electrochem. Soc., Vol. 146, pp. 3603-3605, 1999.

138. Parks, W. G. and Katz, J. “Vapor-phase catalytic oxidation of organiccompounds: Toluene”, Ind. Eng. Chem., Vol. 28, pp. 319-323, 1936.

148

139. Parshall, G. W. and Ittel, S. D. Homogeneous Catalysis: TheApplication and Chemistry of Catalysis by Soluble Transition MetalComplexes, 2nd Ed., Wiley-Interscience, New York, 1992.

140. Pastore, H. O., Coluccia, S. and Marchese, L. “Porousaluminophosphates: From molecular sieves to designed acid catalysts”,Annu. Rev. Mater. Res., Vol. 35, pp. 351-395, 2005.

141. Patil, P. T., Malshe, K. M., Kumar, P., Dongare, M. K. and Kemnitz, E.“Benzoylation of anisole over borate zirconia solid acid catalyst”,Catal. Commun., Vol. 3, pp. 411-416, 2002.

142. Patton, R. L., Wilson, S. T. and Flanigen, E. M. “Molecular sievecompositions”, European Patent, 158349, 1985.

143. Perkias, N., Wang, Y., Koltypin, Y., Gedanken, A. andChandrasekaran, S. “Mesoporous iron-titania catalyst for cyclohexaneoxidation”, Chem. Commun., Vol. 11, pp. 988-989, 2001.

144. Pires, E. L., Wallau, M. and Schuchardt, U. “Cyclohexane oxidationover rare earth exchanged zeolite Y”, J. Mol. Catal. A: Chem.,Vol. 136, pp. 69-74, 1998.

145. Pires, E. L., Magalhães, J. C. and Schuchardt, U. “Effects of oxidantand solvent on the liquid-phase cyclohexane oxidation catalyzed byCe-exchanged zeolite Y”, Appl. Catal. A: Gen., Vol. 203, pp. 231-237,2000.

146. Prakash, A. M., Satyanarayana, C. V. V., Ashtekar, S. andChakrabarthy, D. K. “SAPO-46 molecular sieve: Incorporation ofsilicon at crystallographically independent sites”, J. Chem. Soc., Chem.Commun., pp. 1527-1528, 1994.

147. Prakash, A. M., Hartmann, M., Zhu, Z. and Kevan, L. “Incorporationof transtition metal ions into MeAPO/MeAPSO molecular sieves”,J. Phy. Chem. B, Vol. 104, pp. 1610-1616, 2000.

148. Prasad, S., Barich, D. H. and Haw, J. F. “Probing acid sites in MAPO-36by solid state NMR”, Catal. Lett., Vol. 39, pp. 141-146, 1996.

149. Pujado, P. R., Rabo, J. A., Antos, G. J. and Gembicki, S. A. “Industrialcatalytic applications of molecular sieves”, Catal. Today, Vol. 13,pp. 113-141, 1992.

149

150. Punniyamurthy, T., Velusamy, S. and Iqbal, J. “Recent advances intransition metal catalyzed oxidation of organic substrates withmolecular oxygen”, Chem. Rev., Vol. 105, pp. 2329-2363, 2005.

151. Qian, G., Ji, D., Lu, G. M., Zhao, R., Qi, Y. X. and Suo, J. S.“Bismuth-containing MCM-41: Synthesis, characterization, andcatalytic behavior in liquid-phase oxidation of cyclohexane”, J. Catal.,Vol. 232, pp. 378-386, 2005.

152. Raja, R., Sankar, G. and Thomas, J. M. “Powerful redox molecularsieve catalysts for the selective oxidation of cyclohexane in air”,J. Am. Chem. Soc., Vol. 121, pp. 11926-11927, 1999.

153. Raju, G., Reddy, P. S., Ashok, J., Reddy, B. M. and Venugopal, A.“Solvent-free aerobic oxidation of ethylbenzene over supported Nicatalysts using molecular oxygen at atmospheric pressure”, J. Nat. GasChem., Vol. 1, pp. 293-297, 2008.

154. Ramaswamy, A. V. “Clays, zeolites and solid acid catalysts”,Chim. Ind., pp. 1-9, 2000.

155. Rogovin, M. and Neumann, R. “Silicate xerogels containing cobalt asheterogeneous catalysts for the side-chain oxidation of alkyl aromaticcompounds with tert-butyl hydroperoxide”, J. Mol. Catal. A: Chem.,Vol. 138, pp. 315-318, 1999.

156. Rout, L. and Punniyamurthy, T. “Silica supported vanadium catalyzedn-oxidation of tertiary amines with aqueous hydrogen peroxide”,Adv. Synth. Catal., Vol. 347, pp. 1958-1960, 2005.

157. Salomão, G. C., Olsen, M. H. N., Drago, V., Fernandes, C., Filho, L.C.and Antunes, O. A. C. “Oxidation of cyclohexane promoted by[Fe(III)(Salen)Cl] and [Mn(III)(Salen)Cl]”, Catal. Commun., Vol. 8,pp. 69-72, 2007.

158. Schaefer, T., Chan, W. K., Sebastian, R., Schurko, R. and Hruska, F. E.“Concerning the internal rotation barrier and the experimental andtheoretical NJ(13C,13C) and NJ(1H,13C) in ethylbenzene-beta-13C”,Can. J. Chem., Vol. 72, pp. 1972-197, 1994.

159. Selvam, P. and Dapurkar, S. E. “Catalytic activity of highly orderedmesoporous VMCM-48”, Appl. Catal. A: Gen., Vol. 276, pp. 257-265,2004.

150

160. Selvam, P. and Dapurkar, S. E. “The effect of vanadium sources on thesynthesis and catalytic activity of VMCM-41”, J. Catal., Vol. 229,pp. 64-71, 2005.

161. Shaabani, A., Bazgir, A., Teimouri, F. and Lee, D. G. “Selectiveoxidation of alkylarenes in dry media with potassium permanganatesupported on Montmorillonite K10”, Tetrahedron Lett., Vol. 43,pp. 5165-5167, 2002.

162. Sheldon, R. A. and Kochi, J. K. Metal-Catalyzed Oxidations ofOrganic Compounds: Mechanistic Principles and SyntheticMethodology Including Biochemical Processes, Academic Press, NewYork, 1981.

163. Sheldon, R. A. “Atom efficiency and catalysis in organic synthesis”,Pure Appl. Chem., Vol. 72, pp. 1233-1246, 2000.

164. Sheldon, R. A. and van Bekkum, H. Fine Chemicals throughHeterogeneous Catalysis, Wiley-VCH, Germany, 2001.

165. Sheldon, R. A., Arends, I. W. C. E., Brink, G. T. and Dijksman, A.“Green, catalytic oxidations of alcohols”, Acc. Chem. Res., Vol. 35,pp. 774-781, 2002.

166. Shylesh, S., Prinson, P. S. and Singh, A. P. “Chromium-containingsmall pore mesoporous silicas: Synthesis, characterization and catalyticbehavior in the liquid phase oxidation of cyclohexane”, Appl. Catal. A:Gen., Vol. 318, pp. 128-136, 2007.

167. Silvestre, S. M. and Salvador, J. A. R. “Allylic and benzylic oxidationreactions with sodium chlorite”, Tetrahedron, Vol. 63, pp. 2439-2445,2007.

168. Sing, K. S. W., Everett, D. H., Haul, R. A. W., Moscou, L.,Pierotti, R. A., Rouquerol, J. and Siemieniewska, T. “Reportingphysisorption data for gas/solid systems with special reference to thedetermination of surface area and porosity”, Pure Appl. Chem.,Vol. 57, pp. 603-619, 1985.

169. Singh, P. S., Shaikh, R. A., Bandyopadhyay, R. and Rao, B. S.“Synthesis of CoVPI-5 with bifunctional catalytic activity”, Chem.Commun., Vol. 27, pp. 2255-2256, 1995.

151

170. Singh, P. S., Kosuge, K., Ramaswamy, V. and Rao, B. S.“Characterization of MeAPO-11s synthesized conventionally and inthe presence of fluoride ions and their catalytic properties in theoxidation of ethylbenzene”, Appl. Catal. A: Gen., Vol. 177, pp. 149-159,1999.

171. Stach, H., Thamn, H., Fielder, K., Grauet, B., Weiker, W. and Jahn, E.New Developments in Zeolites Science and Technology, Elsevier,Amsterdam, pp. 539-548, 1986.

172. Subrahmanyam, Ch., Louis, B., Rainone, F., Viswanathan, B., Renken, A.and Varadarajan, T. K. “Partial oxidation of toluene by O2 overmesoporous Cr-AlPO”, Catal. Commun., Vol. 3, pp. 45-50, 2002.

173. Subrahmanyam, Ch., Viswanathan, B. and Varadarajan, T. K.“Synthesis, characterization and catalytic activity of mesoporoustrivalent iron substituted aluminophosphates”, J. Mol. Catal. A: Chem.,Vol. 223, pp. 149-153, 2004.

174. Subrahmanyam, Ch., Louis, B., Viswanathan, B., Renken, A. andVaradarajan, T. K. “Synthesis, characterisation and catalytic propertiesof vanadium substituted mesoporous aluminophosphates”, Appl. Catal.A: Gen., Vol. 282, pp. 67-71, 2005.

175. Suresh, B. W., Saha, S. K., Kubota, Y. and Sugi, Y. “Isopropylation ofbenzene with 2-propanol over AFI alumino-phosphate molecularsieves substituted with alkaline earth metal”, J. Catal., Vol. 228,pp. 192-205, 2004.

176. Szostak, R. Molecular Sieves Principles of Synthesis andIdentification, van Nostrand Reinhold, New York, pp. 205-281, 1989.

177. Tagawa, T., Amemiya, J. and Goto, S. “Chlorine-free Friedel-Craftsacylation of benzene with benzoic anhydride on insoluble heteropolyacid catalyst”, Appl. Catal. A: Gen., Vol. 257, pp. 19-23, 2004.

178. Tang, L., Li, B., Zhai, Z., Li, J., Ou, E. and Wang J. “Selectiveoxidation of diphenylmethane over cobalt doped mesoporous titania-silica catalyst with high Ti content”, J. Catal. Lett., Vol. 121, pp. 63-69,2008.

179. Tapp, N. J., Milestone, N. B. and Bibby, D. M. “Synthesis ofAIPO4-11”, Zeolites, Vol. 8, pp. 183-188, 1988.

152

180. Thomas, J. M., Raja, R., Sankar, G. and Bell, R. G. “Molecular-sievecatalysts for the selective oxidation of linear alkanes by molecularoxygen”, Nature, Vol. 398, pp. 227-230, 1999.

181. Thomas, J. M. “Design, synthesis and in situ characterization of newsolid catalysts”, Angew. Chem. Int. Ed., Vol. 38, pp. 3588-3628, 1999.

182. Thomas, J. M., Raja, R., Sankar, G. and Bell, R. G. “Molecular sievecatalysts for the regioselective and shape selective oxyfunctionalizationof alkanes in air”, Acc. Chem. Res., Vol. 34, pp. 191-200, 2001.

183. Thomas, J. M., Raja, R. and Lewis, D. W. “Heterogeneous single-sitecatalysts”, Angew. Chem. Int. Ed., Vol. 117, pp. 6614-6641, 2005.

184. Timofeeva, M. N., Jhung, S. H., Hwang, Y. K., Kim, D. K.,Panchenko, V. N., Melgunov, M. S., Chesalov, Y. A. and Chang, J. S.“Ce-silica mesoporous SBA-15-type materials for oxidative catalysis:Synthesis, characterization, and catalytic application”, Appl. Catal. A:Gen., Vol. 317, pp. 1-10, 2007.

185. Trimm, D. L. and Irshad, M. J. “The influence of electron directingeffects on the catalytic oxidation of toluenes and xylenes”, J. Catal.,Vol. 18, pp. 142-153, 1970.

186. Trovarelli, A., De Leitenburg, C., Boaro, M. and Dolcetti, G.“The utilization of ceria in industrial catalysis”, Catal. Today, Vol. 50,pp. 353-367, 1999.

187. Van Der Wiele, K. and Van Den Bere, P. J. “Oxidation of toluene overbismuth molybdate catalysts”, J. Catal., Vol. 39, pp. 437-448, 1975.

188. Vanoppen, D. L., De Vos, D. E., Genet, M. J., Rouxhet, P. G. andJacobs, P. A. “Cobalt-containing molecular sieves as catalysts for thelow conversion autoxidation of pure cyclohexane”, Angew. Chem. Int.Ed., Vol. 34, pp. 560-563, 1995.

189. Verberckmoes, A. A., Weckhuysen, B. M. and Schoonheydt, R. A.“Spectroscopy and coordination chemistry of cobalt in molecularsieves”, Micropor. Mesopor. Mater., Vol. 22, pp. 165-178, 1998.

190. Vetrivel, S. and Pandurangan, A. “Vapour-phase oxidation ofethylbenzene with air over Mn-containing MCM-41 mesoporousmolecular sieves”, Appl. Catal. A: Gen., Vol. 264, pp. 243-252, 2004.

153

191. Vetrivel, S. and Pandurangan, A. “Co and Mn impregnated MCM-41:Their applications to vapour phase oxidation of isopropylbenzene”,J. Mol. Catal. A: Chem., Vol. 227, pp. 269-278, 2005.

192. Vijayaraghavan, V. R. and Raj, K. J. A. “Ethylation of benzene withethanol over substituted large pore aluminophosphate-based molecularsieves”, J. Mol. Catal. A: Chem., Vol. 207, pp. 41-50, 2004.

193. Wang, B., Mao, W. and Ma, H. “A mild simple method for liquid-phase selective catalytic oxidation of toluene with ozone over CeO2

promoted sulfated TiO2”, Ind. Eng. Chem. Res., Vol. 48, pp. 440-445,2009.

194. Wang, J. Y., Zhao, F. Y., Liu, R. J. and Hu, Y. Q. “Oxidation ofcyclohexane catalyzed by metal-containing ZSM-5 in ionic liquid”,J. Mol. Catal. A: Chem., Vol. 279, pp. 153-158, 2008.

195. Wang, K., Yu, J. and Xu, R. “Investigation on the chain-to-chain andchain-to-open-framework transformations of two one-dimensionalaluminophosphate chains”, Inorg. Chem., Vol. 42, pp. 4597-4602,2003.

196. Wang, N., Tang, Z. K., Li, G. D. and Chen, J. S. “Materials science:Single-walled 4 Å carbon nanotube arrays”, Nature, Vol. 408,pp. 50-51, 2000.

197. Weckhuysen, B. M. and Schoonheydt, R. A. “Recent progress indiffuse reflectance spectroscopy of supported metal oxide catalysts”,Catal. Today, Vol. 49, pp. 441-451, 1999.

198. Weckhuysen, B. M., Rao, R. R., Martens, J. A. and Schoonheydt, R. A.“Transition metal ions in microporous crystalline aluminophosphates:Isomorphous substitution”, Eur. J. Inorg. Chem., Vol. 1999, pp. 565-577,1999.

199. Weiss, J. M. and Downs, C. R. “Production of maleic acid”, US Patent,1318632, 1919.

200. Wentzel, B. B., Donners, M. P. J., Alsters, P. L., Feiters, M. C. andNolte, R. J. M. “N-Hydroxyphthalimide/Cobalt(II) catalyzed lowtemperature benzylic oxidation using molecular oxygen”, Tetrahedron,Vol. 56, pp. 7797-7803, 2000.

201. Wiberg, K. B. and Ford, P. C. “Kinetics of the cerium(IV) oxidation ofbenzaldehyde”, J. Am. Chem. Soc., Vol. 91, pp. 124-132, 1969.

154

202. Wilson, S. T., Lok, B. M., Messina, C. A., Cannan, T. R. and Flanigen,E. M. “Aluminophosphate molecular sieves: A new class ofmicroporous crystalline inorganic solids”, J. Am. Chem. Soc., Vol. 104,pp. 1146-1147, 1982.

203. Wilson, S. T., Lok, B. M. and Flanigen, E. M. “Crystallinemetallophosphate compositions”, US Patent, 4310440, 1982a.

204. Wilson, S. T. and Flanigen, E. M. “Crystalline metalaluminophosphate”, US Patent, 4567029, 1986.

205. Wilson, S. T. “B. Synthesis of AlPO4,-based molecular sieves”,Stud. Surf. Sci. Catal., Vol. 58, pp. 137-151, 1991.

206. Wilson, S. T. “Chapter 5B Phosphate-based molecular sieves: Novelsynthetic approaches to new structure and compositions”,Stud. Surf. Sci. Catal., Vol. 137, pp. 229-260, 2001.

207. Wolfovich, A. M., Jothiramalingam, R., Landau, M. V., Herskowitz, M.,Viswanathan, B. and Varadarajan, T. K. “Cerium incorporated orderedmanganese oxide OMS-2 materials: Improved catalysts for wetoxidation of phenol compounds”, Appl. Catal. B: Environ., Vol. 59,pp. 91-98, 2005.

208. Wu, J. Y., Chien, S. H. and Wan, B. Z. “Characterisation of MnAPO-5for ethane oxydehydrogenation”, Ind. Eng. Chem. Res., Vol. 40,pp. 94-100, 2001.

209. Yao, W., Chen, Y., Min, L., Fang, H., Yan, Z., Wang, H. and Wang, J.“Liquid oxidation of cyclohexane to cyclohexanol over cerium-dopedMCM-41”, J. Mol. Catal. A: Chem., Vol. 246, pp. 162-166, 2006.

210. Yokomori, Y. and Kawachi, Y. “Synthesis of large single crystals ofCoAPO-5 molecular sieves”, Zeolites, Vol. 15, pp. 637-639, 1995.

211. Young, L. B. and Trahanovsky, W. S. “Oxidation of organiccompounds with cerium(IV). VII. Formation constants for l/lcerium(IV)-alcohol complexes”, J. Am. Chem. Soc., Vol. 91,pp. 5060-5068, 1969.

212. Yu, C., Ge, Q., Xu, H. and Li, W. “Effects of Ce addition on thePt-Sn/ -Al2O3 catalyst for propane dehydrogenation to propylene”,Appl. Catal. A: Gen., Vol. 315, pp. 58-67, 2006.

155

213. Yu, J. and Xu, R. “Rich structure chemistry in the aluminophosphatefamily”, Acc. Chem. Res., Vol. 36, pp. 481-490, 2003.

214. Yuan, H. X., Xia, Q. H., Zhan, H. J., Lu, X. H. and Su, K. X.“Catalytic oxidation of cyclohexane to cyclohexanone andcyclohexanol by oxygen in a solvent-free system over metal-containingZSM-5 catalysts”, Appl. Catal. A: Gen., Vol. 304, pp. 178-184, 2006.

215. Yuen, L. T., Zones, S. I., Harris, T. V., Gallegos, E. J. and Auroux, A.“Product selectivity in methanol to hydrocarbon conversion forisostructural compositions of AFI and CHA molecular sieves”,Micropor. Mater., Vol. 2, pp. 105-117, 1994.

216. Yuliati, L., Hamajima, T., Hattori, T. and Yoshida, H. “Highlydispersed Ce(III) species on silica and alumina as new photocatalystsfor non-oxidative direct methane coupling”, Chem. Commun.,pp. 4824-4826, 2005.

217. Zahedi-Niaki, M. H., Kapoor, M. P. and Kaliaguine, S.“H2O2 oxidation and epoxidation of hydrocarbons and alcohols overtitanium aluminophosphates TAPO-5, TAPO-11 and TAPO-36”,J. Catal., Vol. 177, pp. 231-239, 1998.

218. Zahedi-Niaki, M. H., Zaidi, S. M. J. and Kaliaguine, S. “Comparativestudy of vanadium aluminophosphate molecular sieves VAPO- 5, -11,-17 and -31”, Appl. Catal. A: Gen., Vol. 196, pp. 9-24, 2000.

219. Zhan, W., Lu, G., Guo, Y., Guo, Y., Wang, Y., Wang, Y., Zhang, Z.and Liu, X. “Synthesis of cerium-doped MCM-48 molecular sieves andits catalytic performance for selective oxidation of cyclohexane”,J. Rare Earths, Vol. 26, pp. 515-522, 2008.

220. Zhang, G., Shen, Z., Liu, M., Guo, C., Sun, P., Yuan, Z., Li, B., Ding, D.and Chen, T. “Synthesis and characterization of mesoporous ceria withhierarchical nanoarchitecture controlled by amino acids”, J. Phys.Chem. B, Vol. 110, pp. 25782-25790, 2006.

221. Zhang, R. Z., Mei, D., Qin, Z. F. and Wang, J. G. “Synthesis andcharacterization of CoAPO-5 and MnAPO-5 for selective oxidation ofcyclohexane”, J. Fuel Chem. Technol., Vol. 35, pp. 98-103, 2007.

222. Zhao, Q., Wang, Q., Tang, Y., Jiang, T., Li, C. and Yin, H.“Characterization and synthesis of Ce-incorporated mesoporousmolecular sieves under microwave irradiation condition”, KoreanJ. Chem. Eng., Vol. 27, pp. 1310-1315, 2010.

156

223. Zhao, R., Ji, D., Lv, G., Qian, G., Yan, L., Wang, X. and Suo, J. S.“A highly efficient oxidation of cyclohexane over Au/ZSM-5molecular sieve catalyst with oxygen as oxidant”, J. Chem. Commun.,Vol. 35, pp. 904-905, 2004.

224. Zhao, R., Wang, Y., Guo, Y., Guo, Y., Liu, X., Zhang, Z., Wang, Y.,Zhan, W. and Lu, G. “A novel Ce/AlPO-5 catalyst for solvent-freeliquid phase oxidation of cyclohexane by oxygen”, Green Chem.,Vol. 8, pp. 459-466, 2006.

225. Zhou, L., Xu, J., Miao, H., Li, X. and Wang, F. “Synthesis ofFeCoMnAPO-5 molecular sieve and catalytic activity in cyclohexaneoxidation by oxygen”, Catal. Lett., Vol. 99, pp. 231-234, 2005.

226. Zhou, L., Xu, J., Chen, C., Wang, F. and Li, X. “Synthesis of Fe, Co,and Mn substituted AlPO-5 molecular sieves and their catalyticactivities in the selective oxidation of cyclohexane”, J. Porous Mater.,Vol. 15, pp. 7-12, 2008.

227. Zones, S. I., Nakagawa, Y., Yuen, L. T. and Harris, T. V. J.“Guest/host interactions in high silica zeolite synthesis:[5.2.1.02.6]tricyclodecanes as template molecule”, J. Am. Chem. Soc.,Vol. 118, pp. 7558-7567, 1996.