© Renault Brand Stores - July 2015

Renault Store - Technical specifications

After-sales unit

2

© Renault Brand Stores - July 2015

Renault Store / Technical specifications for the after-sales unit / Contents

Contents

General

Introduction 4

Colours & materials 5

Technical principles

General description 7

Schematic exploded view 10

The «service pack» bracket 11

The floor mat bracket 12

General

4

© Renault Brand Stores - July 2015

Renault Store / Technical specifications for the after-sales unit / General

Introduction

Present at key moments along the customer journey, in the principal flows, the purpose of these accessories units is to generate additional sales when a vehicle is being purchased, at the time of handover or during after-sales visits. They serve as a form of leverage for impulse buys.

The after-sales unit is a small unit positioned at the After-Sales Reception and displays the service packs supplied by the After-Sales Department. The display modules should not be left empty.

The lower part of the unit displays additional accessories (floor mats).

5

© Renault Brand Stores - July 2015

Renault Store / Technical specifications for the after-sales unit / General

RAL 9003 satin white

- Particle board panel with white melamine finish in EGGER W1000 ST9 premium white

- Lacquered aluminium

Visual

- Services pack

Dark grey equivalent to RAL 7024

- Particle board panel Dark grey finish in EGGER U963 ST15 diamond grey

- Lacquered steel

Pantone 426 EC grey

- Satin or matt adhesive

PET or PMMA

- Transparent, 3 mm thick

Colours & materials

Pantone 7579 EC orange

- Satin or matt adhesive

Typeface Renault Life

Markings and texts Refer to the «Showroom communication» specifications

Technical principles

7

2023

760 300

7

4

2

3

1

6

5

8

© Renault Brand Stores - July 2015

Renault Store / Technical specifications for the after-sales unit / Technical principles

Key1 Particle board panel, 20 mm thick

White melamine finish in EGGER W1000 ST9 pre-mium white. Adhesive markings in Pantone 7579 EC orange and black.

2 Particle board panel, 20 mm thick Dark grey melamine finish in EGGER U963 ST15 diamond grey

3 Lightweight particle board panels, 60 mm thick White melamine veneering of outer surfaces in EGGER W1000 ST9 premium white. 1 mm white PVC edges.

4 Floor mat brackets Pantone 426 EC grey lacquered steel Floor mats bolted on (anti-theft)

5 Back of the unit Particle board panel, 20 mm thick Dark grey melamine finish in EGGER U963 ST15 diamond grey

6 Plinth inset by 20 mm7 Lacquered steel attachment plate, 5 mm thick.

RAL 7024 dark grey satin finish Rounded-off angles and edges Install ballast if required

8 «Service pack» distributor bracket Sheet metal or PMMA front panel lacquered in RAL 7024 dark grey satin finish Tunnel in crystal PMMA or PET with pusher

General description

8

60

6029

014

214

214

290

0

1568

290

2023

6060

6020

2060

25

200

64060 60

4720 20142 142 1424740 40

760

800

2020

1

2

© Renault Brand Stores - July 2015

Renault Store / Technical specifications for the after-sales unit / Technical principles

Front view and back view

1 Service pack Box dimensions h. 142 x w. 142 x d. 10 mm

2 Front in crystal PET or PMMA with height aligned with box graphics (do not cover the sticker visuals)

General description

9

2018

1998

938

648

290

7020

600

300

300

20

26020 20

162 2078

800

7

6

4

8

5

2

3

1

9

10

11

© Renault Brand Stores - July 2015

Renault Store / Technical specifications for the after-sales unit / Technical principles

Overhead view and cross-section

1 Back offset by 20 mm Grey melamine interior White melamine exterior

2 Floor mat bracket3 PMMA mounting angle for tunnels at the front4 Spring-operated pusher with backing plate for

«service packs», dark grey melamine finish5 Front veneered with grey melamine. Particle board

panel, 20 mm thick6 PET or PMMA protrusion, 30 mm out from the front7 Service pack box8 White melamine veneer on 20 mm of visible end9 White melamine veneer on front surface

10 Lightweight board, 60 mm thick11 Rubber pads, 5 mm thick

General description

10

1 2 3 5 76 9 10 111284 11

© Renault Brand Stores - July 2015

Renault Store / Technical specifications for the after-sales unit / Technical principles

Schematic exploded viewKey

1 Adhesive branding2 Particle board panel front, 20 mm thick White melamine

finish in EGGER W1000 ST9 premium white3 Floor mat bracket4 Lacquered steel attachment plate, 5 mm thick, in RAL

7024 dark grey satin finish. Rounded-off angles and edges. Install ballast if required

5 Plinth inset by 20 mm Water-repellent particle board panel with dark grey PVC veneered edges

6 Particle board panel front Dark grey melamine finish in EGGER U963 ST15 diamond grey

7 Particle board shelves Dark grey melamine finish in EGGER U963 ST15 diamond grey

8 «Service pack» bracket in folded and bonded crystal PET, 3 mm thick

9 Particle board Dark grey melamine finish in EGGER U963 ST15 diamond grey

10 Back of the unit veneered with dark grey melamine in EGGER U963 ST15 diamond grey.

11 Lightweight boards, 60 mm thick, veneered with white melamine in EGGER W1000 ST9 premium white. White PVC veneer edges.

12 Back of unit inset by 20 mm. Particle board panel. White melamine veneer in EGGER W1000 ST9 premium white.

11

148

14

250

150

186

Couper le rail du poussoir ICI

Aention bien vérifier que le poussoirsoit a�eurant au bac.

Collage poussoir et entretoise avec colle spéciale PVC

81

3

Position de 81mm à respecterpour obtenir un jeu de 3mm sous le poussoir

1 2 5 643

© Renault Brand Stores - July 2015

Renault Store / Technical specifications for the after-sales unit / Technical principles

PrincipleThe pusher is a standard component adapted by cutting to the desired length.

Key1 Double-sided adhesive for affixing below

the tunnel.2 HL DISPLAY Optimal+ breakable pusher,

50 mm wide3 Tunnel shim4 Thermofolded PMMA tunnel5 Spacer6 Dark grey PMMA or steel front with melamine finish

The «service pack» bracket

12

200

248

30

400

42 42 42 42 30

206

25

30

1 2 3 4 5 86 7 9

© Renault Brand Stores - July 2015

Renault Store / Technical specifications for the after-sales unit / Technical principles

DescriptionThe floor mat bracket is common to various accessories units:Showroom, Delivery and After-Sales.Only the fastening system varies depending on the unit.

It can therefore be adapted to be used with the multi-strip backing rails of the accessories units.Various types of floor mats are displayed on rotating arms. The mats are bolted to the arm at the top, ensuring they are secure.

Key1 Dark grey lacquered steel bar h. 28 x l. 400 mm

in EGGER U963 ST15 diamond grey2 Dark grey lacquered steel angle profile h. 30 x w.

30 x l. 400 mm in EGGER U963 ST15 diamond grey

3 Bolts to mount the floor mats - Black finish4 Dark grey lacquered steel reinforcement5 Dark grey lacquered square tube, 25 x 25 mm6 Rotation bearing7 Washer8 Bolts to mount the brackets on the U-shaped

plate Black lacquered or dichromated finish9 U-shaped steel attachment plate, 3 mm thick,

dark grey lacquer

The floor mat bracket

13

4 5 7 981 32 6

© Renault Brand Stores - July 2015

Renault Store / Technical specifications for the after-sales unit / Technical principles

The floor mat bracket

Schematic exploded view1 Assembled floor mat holding arm2 Dark grey lacquered steel angle profile

h. 30 x w. 30 x l. 400 mm in EGGER U963 ST15 diamond grey

3 Dark grey lacquered steel bar h. 28 x w. 400 mm in EGGER U963 ST15 diamond grey

4 Floor mat fastening bolts Black finish

5 Dark grey lacquered steel reinforcement6 Bolts to mount the brackets

on the U-shaped plate Black finish

7 Washer8 Dark grey lacquered square tube, 25 x 25 mm9 U-shaped steel attachment plate, 3 mm thick,

dark grey lacquer