THIS PRODUCT MANUFACTUREDWITH LEAD-FREE PROCESSINGPb

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

DESIGNED & DIMENSIONEDIN MILLIMETERS[INCHES]

DO NOTSCALE FROM

THIS PRINT

MMCX-P-C-X-RA-CA1

TERMINATION-CA1: CABLE(RG174 OR RG316)

GENDER-P: PLUG

TYPE-C: CABLE

-RA: RIGHT ANGLEORIENTATION

PLATING SPECIFICATION-H: 30µ" GOLD CENTER CONTACT, 3µ" GOLD OUTER CONTACT(SEE TABLE 1)

7.00 REF.276

9.00 REF.354

2.40 REF.094

1

2.20 REF.087

0.50 .020REF

3

2.88 REF.113

0.50 .020REF

4

7.00 REF.276

3.90 REF.154

2

C

SHEET OF

UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE INMILLIMETERS [INCHES].TOLERANCES ARE:DECIMALS ANGLES.X: 0.3 [.01] 5 .XX: 0.13 [.005].XXX: 0.051 [.0020]MATERIAL:

MMCX R/A CABLE PLUG, RG174 & RG316- 50 OHM

BY:MMCX-P-C-X-RA-CA1

DWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

R MUSSER 02/06/2008 21

SHEET SCALE: 6:1

F:\DWG\MISC\MKTG\MMCX-P-C-X-RA-CA1-MKT.SLDDRW

NOTES:

1. REPRESENTS A CRITICAL DIMENSION.2. CENTER CONTACT PUSHOUT FORCE: 26.69 N [6LB] MIN3. NOTE DELETED.4. NOTE DELETED.5. PRODUCT TO BE PACKAGED PER PACKAGING STANDARD CO-RF-WI-3040-M.6. NOTE DELETED.7. NOTE DELETED.8. NOTE DELETED.

SHELL, FERRULE, CAP: BRASSCONTACT: BRASSDIELECTRIC: PTFE

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

REVISION T

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

1.50±0.30 .059±.012

2.70±0.30 .106±.012

7.60±0.30 .299±.012

RG174 OR RG316 CABLE

IN-PROCESS 1STRIP AND TIN INNER CONDUCTOR

C

C

C

20.0±2.5 .79±.10

HST-0.187-02-BLK

IN-PROCESS 2ADD HEAT SHRINK TUBE AND FERRULE

2

2.40 .094(MIN. FLARED ID)

IN-PROCESS 3FLARE SHIELD

IN-PROCESS 4ADD SUB ASSEMBLY

1

3

4

'B'

IN-PROCESS 6INSERT INSULATOR AND CAP

0.6 MAX GAP ALLOWABLE.03

IN-PROCESS 7APPLY HEAT SHRINK TUBING

3.45 HEX CRIMP.136(ACROSS 2 FACES)

0.25 MAX ALLOWABLE GAP.010

'C'

'A'

IN-PROCESS 5CRIMP FERRULE & SOLDER SIGNAL PIN

(USE RF CRIMP HAND TOOL #CAT-RF-FER-001 AND 0.128" DIE SIZE)

C

C

0.00±0.10 .000±.004 DETAIL 'B' SCALE 5 : 1

C

DETAIL 'C'

END OF CABLE DIELECTRICSHOULD NOT SEAT AGAINST

CONTACT CUP

CABLE CENTER CONDUCTORSHOULD NOT PROTRUDE

OUTSIDE CONTACT CUP AFTERFERRULE IS CRIMPED

0.41 REF.016

0.05 REF.002TO CENTER CONTACT

1.70 REF.067TO INSULATOR

DETAIL 'A' SCALE 8 : 1

SHEET OF

MMCX R/A CABLE PLUG, RG174 & RG316- 50 OHM

BY:

MMCX-P-C-X-RA-CA1DWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

R MUSSER 02/06/2008 22

SHEET SCALE: 6:1

REVISION T

F:\DWG\MISC\MKTG\MMCX-P-C-X-RA-CA1-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322