44

Frames

Swingarms

FendersStruts

Gas Tanks

Oil Tanks

FwdControls

Kickstands

Handlebars

Exhaust

Misc.

Frames

Rigids

RIGID FRAMES / 1-1/4” TUBING

* All DOM steel tubing, mandrel bent * TIG-MIG welded* Frames will accept Evolution motors (except Twin Cam), Shovelhead & Panhead engines with clearance for cylinders up to .200” taller than stock Evolution * Run a 5 or 6-speed Softail-type transmission in these frames

Beefy 1-1/2” tubing used on allFRAME BACKBONES

OIL TANK MOUNTS are set-upto accept stock or custom Softail-style oil tanks,with pur-chase of K13006 rear mounting bracket

REAR FENDER MOUNTS providea solid, secure platform for fasteninga wide variety of fenders

REAR MOTOR MOUNT ismilled after welding

TRANSMISSION PLATES are availablein welded-in, one-piece versionswith built-in offsets, providing the best possible driveline alignment as well asunit construction strength(Some models are designed for use withtraditional-type trans plate)

Provision for 1986-1999Softail-style BRAKE CALIPERSand caliper brackets

REAR AXLE CARRIERS are solid steel 230/240/250 frames come with our 1” axle, whereas the stock width, 180 & 200 width frames aredelivered with 3/4” axles

All frAmes come complete

with A mAnufActurer’s stAtement of origin

NECKS are CNC machinedfrom solid steel

NECK RAKE angles 30º / 34º / 38º

FRONT RAIL STRETCHES of 0” / 2 “ / 4” / 8”

FRONT MOTOR MOUNT is solid steelWide tire models have built-in offsets

GAS TANK MOUNTS are welded to the frame and accept Softail-style flatside tanks

S.N. BOSS

Frame shown is 4” stretch model

45

Frames

Swingarms

FendersStruts

Gas Tanks

Oil Tanks

FwdControls

Kickstands

Handlebars

Exhaust

Misc.

Frames

PaRt # K16051 K16052

style Rigid Rigid

tiRe Width Stock Stock

tubing 1-1/4" 1-1/4"

Rake 30º 34º

uP stRetch 0" 2"

RIGID FRAMES / 1-1/4” TUBING / STOCK WIDTH* Frames use stock width disc brake wheel, 1986-1999 Softail-style brakes, axles and spacers * Run a 1-1/2” belt (or chain) * Frame is made with an integral 1-piece transmission mount for Softail-style 5-speeds* Component kits are included, where indicated

46

Frames

Swingarms

FendersStruts

Gas Tanks

Oil Tanks

FwdControls

Kickstands

Handlebars

Exhaust

Misc.

Frames

PaRt # K16054 K16055

style Rigid Rigid

tiRe Width Stock Stock

tubing 1-1/4" 1-1/4"

Rake 34º 38º

uP stRetch 4" 4"

back bone stR.1-1/2"1-1/2"

included

PaRt # K16056 K16057 K16058

style Rigid Rigid Rigid

tiRe Width 180 180 180

tubing 1-1/4" 1-1/4" 1-1/4"

Rake 30º34º 38º

uP stRetch 0" 2" 2"

includesAxle KitAxle KitAxle Kit

47

RIGID FRAMES / 1-1/4” TUBING / 180 TIRE WIDTH * Designed for 180 width tire w/1-1/2” belt or 200 width tire with a chain * Offset built into frame...no spacing required * Stock motor and transmission bolt right in without modification * Trans mount built into frame, providing additional strength & accurate driveline alignment * Component kit is included

Frames

Swingarms

FendersStruts

Gas Tanks

Frames

PaRt # K16060 K16061

style Rigid Rigid

tiRe Width 180 180

tubing 1-1/4" 1-1/4"

Rake 34º 38º

uP stRetch 4" 4"

back bone stR.1-1/2"1-1/2"

includesAxle KitAxle Kit

Oil Tanks

FwdControls

Kickstands

Handlebars

Exhaust

Misc.

kit included

kit included

Sold Separately

Sold Separately

RIGID FRAMES / 1-1/4” TUBING / 200 TIRE WIDTH * Designed for 200 width tire w/1-1/2” belt or chain * Offset is built into the frame...use 1/2” spacer between engine and inner primary cover use 1/2” longer spacing on engine sprocket or pulley * Component kit is included

48

Frames

Swingarms

FendersStruts

Gas Tanks

Oil Tanks

FwdControls

Kickstands

Handlebars

Exhaust

Misc.

Frames

PaRt # K16074

style Rigid

tiRe Width 200

tubing 1-1/4"

Rake 34º

uP stRetch 4"

back bone stR.1-1/2"

includesAxle Kit

PaRt # K16063 K16064

style Rigid Rigid

tiRe Width 200 200

tubing 1-1/4" 1-1/4"

Rake 34º 38º

uP stRetch 8" 8"

back bone stR.4"4"

includesAxleAxle

KitKit

kit included

kit included

49

RIGID FRAMES / 1-1/4” TUBING / 230/240/250 TIRE WIDTHFrames

Swingarms

FendersStruts

Gas Tanks

Oil Tanks

Fwd Controls

Kickstands

Handlebars

Exhaust

Misc.

Frames

* Designed for 230/240 tires using a 1-1/2” belt (or chain), and 250 width tires using a 1-1/8” belt (or chain) * 1-piece transmission mount is welded to frame and provides unit construction strength & better driveline alignment * Offset is built into frame...use 1” spacer between engine and inner primary cover use 1” spacer on engine sprocket or pulley * Component kit is included

PaRt # K16066 K16068

style Rigid Rigid

tiRe Width 230/240/250 230/240/250

tubing 1-1/4" 1-1/4"

Rake 34º 38º

uP stRetch 2" 2"

includes1" Axle Kit1" Axle Kit

PaRt # K16071 K16073

style Rigid Rigid

tiRe Width 230/240/250 230/240/250

tubing 1-1/4" 1-1/4"

Rake 34º 38º

uP stRetch 4" 4"

back bone stR.1-1/2"1-1/2"

includesAxleAxle

KitKit

kit included

kit included

RIGID FRAMES / 1-1/4” TUBING / STOCK WIDTH * Frames are designed for removable transmission plate for chain drive 4 and 5-speeds * Uses stock width disc brake wheel, Softail-style brakes (pre-2000), axle & adjusters

50

Frames

Swingarms

FendersStruts

Gas Tanks

Oil Tanks

FwdControls

Kickstands

Handlebars

Exhaust

Misc.

Frames

PaRt # K16001 K16002

style Rigid Rigid

tiRe Width Stock Stock

tubing 1-1/4" 1-1/4"

Rake 30º 34º

uP stRetch 0" 2"

51

RIGID FRAMES / 1-1/4” TUBING / 180 TIRE WIDTH * Frames are engineered for 180 tire w/ 1-1/2” belt or 200 tire with chain * Offset built into frame. . .no spacing required * Stock motor and transmission bolt-in * Accepts 4 or 5-speed transmissions * Requires using a removable trans plate * Component kit is included

Frames

Swingarms

FendersStruts

Gas Tanks

Oil Tanks

FwdControls

Kickstands

Handlebars

Exhaust

Misc.

Frames

PaRt # K16006 K16007 K16008

style Rigid Rigid Rigid

tiRe Width 180180180

tubing 1-1/4" 1-1/4" 1-1/4"

Rake 30º 34º38º

uP stRetch 0"2" 2"

includesAxle KitAxle KitAxle Kit

kit included

Sold Separately

RIGID FRAMES / 1-1/4” TUBING / 230/240/250 TIRE WIDTH

52

* Run a 230/240 tire with a 1-1/2” belt or chain, 250 tire with 1-1/8” belt or chain * Offset built into frame. . .requires 1” spacing between engine & inner primary cover and 1” spacer on engine sprocket or pulley * Accepts 5-speed transmissions * Requires using a removable transmission plate * Component kit is included

RIGID FRAMES / 1-1/4” TUBING / 180 TIRE WIDTH * Frames are engineered for 180 tire w/ 1-1/2” belt or 200 tire with chain * Offset built into frame. . .no spacing required * Stock motor and transmission bolt-in * Accepts 4 or 5-speed transmissions * Requires using a removable trans plate * Component kit is included

Frames

Swingarms

FendersStruts

Gas Tanks

Oil Tanks

FwdControls

Kickstands

Handlebars

Exhaust

Misc.

Frames

PaRt # K16016

style Rigid

tiRe Width 230/240/250

tubing 1-1/4"

Rake 38º

uP stRetch 2"

includesAxle Kit

PaRt # K16010 K16011

style Rigid Rigid

tiRe Width 180180

tubing 1-1/4" 1-1/4"

Rake 34º 38º

uP stRetch 4" 4"

back bone stR.1-1/2"1-1/2"

includesAxleAxle

KitKit

kit included

kit included

Sold Separately

1-1/2” BACKBONE TUBINGAvailable Stretch Configurations

0" / 1-1/2" / 4"

REAR AXLES are supplied stock and 180.Frame uses 3/4" axles.

REAR AXLE CARRIERS are precision machined

billet steel offered with open axle.

NECKS are CNC-machinedfrom solid steel

NECK RAKE ANGLES30º / 34º TOP MOTOR MOUNT

TRANSMISSION PLATE

OIL TANK MOUNTS

FRONT RAIL STRETCHES of 0” / 2 “ / 3” / 4”

FRONT MOTOR MOUNTS

VOLTAGE REGULATOR MOUNTS

REAR FENDER MOUNTS

53

Frames

Swingarms

FendersStruts

Gas Tanks

Oil Tanks

FwdControls

Kickstands

Handlebars

Exhaust

Misc.

Frames

RIGID SPORTSTER FRAMES / 1-1/4” TUBING

* Feature 1-1/4” thick wall, DOM steel tubing with 1-1/2” backbones* All frames are TIG-MIG welded & will accept Sportster Engines(1986-2003)* Component Kits are included with purchase of frame... These kits are not sold seperately* Standard frames accept a 130 tire with a conventional 1-1/8" belt drive assembly or chain, and 180 width frames can take a stock belt, or a 200-series tire when using a chain.* Frame is designed to use a 1/2" transmission off-set sprocket for proper balance.* Available with neck rakes of 30º and 34º and up-stretches of 0"/ 2"/ 3"/ and 4".

All frAmes come complete with A mAnufActurer’s stAtement of origin