Rocproptm Hardrock Applications
RocsetTM
An efficient replacement for timber sets and steel arches where yieldability is required. Rocsets are effective in ground that is too friable for drilling. The 100% roof cover is actively installed.
Tunnel before rehabilitation Tunnel during rehabilitation Tunnel on completion Tunnel intersection rehabilitation
Mine Support Products (Pty) Ltd is a wholly owned subsidiary of Robor (Pty) Ltd
For more information: Tel: +27 (0)11 971 1800 | Fax2email: +27 (0)86 574 9186Email: [email protected] | www.msp.co.za
In-Stope SupportPreferred support system in both seismic and high closure environments. Typical deep level hardrock mine applications, between 0.9m - 6m.
Bullnose/Tunnel Intersection Support Replace ineffective and costly timber pack (cribs) at tunnel intersections. It is an easy means of reducing the effective span.
Reef Intersection SupportA specialised installation which caters for high stress changes and large deformation ranges while stoping through pre-development.
Brow SupportUndercutting of brows to reduce the amount of external waste, often associated with mining narrow ore-bodies.
Winch Area SupportEffectively supports hanging walls at remote locations, such as winch beds.
201846 MSPApplicationLeaflet 0718.indd 1 2018/07/16 1:35 PM
Rocproptm Softrock Applications
Systematic roadway support: Main drive support
Systematic roadway support: Three inches of closure
Mine Support Products (Pty) Ltd is a wholly owned subsidiary of Robor (Pty) Ltd
For more information: Tel: +27 (0)11 971 1800 / Fax2email: +27 (0)86 574 9186Email: [email protected] | www.msp.co.za
Longwall moves Beltdrive support Brow support
Systematic Roadway SupportWhen systematically installed, the Rocprops are capable of providing sufficient support
resistance to ensure stable conditions, also replacing grouted mechanical anchors due to
ease of installation.
Tailgate and Headgate Support The higher capacity Rocprops can ensure stability during longwall operations
Barrier line SupportCan be used in cave mining and other environments, to prevent the uncontrolled progression of roof collapses into working areas.
Vent Wall constructionAn easy method of constructing ventilation walls, especially where blast resistance is required.
longwall MovesA proven methodology that saves the mine
down-time when relocating shield support
in continuous mining operations.
Beltdrive SupportAn active and yielding support system that
is slender in design and therefore does not
impede ventilation flow.
Brow SupportActively supports overhanging brows.
201846 MSPApplicationLeaflet 0718.indd 2 2018/07/16 1:35 PM