Roundness Cylindrical Profile Measuring...

Roundness・Cylindrical Profile Measuring Instruments

http://www.accretech.jp/

•We reserve the right to change the contents of this catalog, including product specifications, without notice when products are updated.

B-84-641-E-1305

■ Head Office2968-2, Ishikawa-machi, Hachioji-city,Tokyo 192-0032, JapanTEL: 81(42)642-1701 　　FAX: 81(42)642-1821

■ International Sales and Marketing4, Higashi-Nakanuki-machi,Tsuchiura-city, Ibaraki 300-0006, JapanTEL: 81(29)831-1240 　　FAX: 81(29)831-1461

■Germany / Accretech (Europe) GmbH (Head Office)Landsberger Str. 396, D-81241 Munich, GermanyTEL: 49 (89) 546788-0 　　FAX: 49 (89) 546788-10

■China / Accretech (China) Co., Ltd. (Head Office / Shanghai)Room 2101C, No 1077, Zuchongzhi Road, Pudong New Area, Shanghai, China, 201203TEL: 86(21)3887-0801 　　FAX: 86(21)3887-0805

■ Korea / Accretech Korea Co., Ltd. (Head Office / Seongnam)3F, Fine Venture Bldg., 345-1 Yatap-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-828, KoreaTEL: 82(31)786-4000 　　FAX: 82(31)786-4090

(Korea / Ulsan Office)2015 2F Jinjang Deplex 285-3 Jinjang-dong, Buk-gu, Ulsan, KoreaTEL: 82(52)268-2136 　　FAX: 82(52)268-2137

■ Thailand / Tokyo Seimitsu (Thailand) Co., Ltd. (HQ & Metrology)2/3 Moo 14, Bangna Towers B 1st floor, Bangna-Trad Rd., K.M. 6.5, Bangkaew, Bangplee, Samutprakarn 10540 ThailandTEL: 66(2751)9573, 9574 　　FAX: 66(2751)9575

■ Vietnam / TOKYO SEIMITSU CO., LTD. (HANOI REPRESENTATIVE OFFICE)8F, Office Building, No.85 Nguyen Du Street, Nguyen Du Ward, Hai Ba Trung District, Hanoi, VietnamTEL: 84(43)941-3309 　　FAX: 84(43)941-3310

■ Indonesia / TOKYO SEIMITSU CO., LTD. (INDONESIA REPRESENTATIVE OFFICE)Ruko Thamrin Block F4, 3rd Floor Jl. M.H. Thamrin, Lippo Cikarang, Bekasi, 17550 Indonesia TEL: 62 (0)21 8990 2863 　　FAX: 62 (0)21 8990 2864

Some of our products shall be controlled by the Foreign Exchange and Foreign Trade Act, and required an export license by the Japanese Government.Regarding exporting the products and/or providing a non-resident with technologies, please consult Tokyo Seimitsu.

•ISO 9001 and ISO14001 awarded to the Hachioji and Tsuchiura Plants

Tab

le R

ota

tin

g T

ype:

CN

CTa

ble

Ro

tati

ng

Typ

e: M

anu

alD

etec

tor

Ro

tati

ng

Typ

eP

ort

able

/ L

arg

e-s

ized

M

easu

rin

g In

stru

men

tS

oft

war

eO

pti

on

sR

ou

nd

nes

s p

aram

eter

INDEXRoundness/Cylindrical Profile Measuring Instruments series … 4

Table Rotating Type RONDCOM series ……………………………… 8

Table Rotating Type: CNCRONDCOM 65A ……………………………………………………… 10RONDCOM 60A ……………………………………………………… 12RONDCOM 55B ……………………………………………………… 14RONDCOM 54DX3/54SD3 ………………………………………… 16

Table Rotating Type: ManualRONDCOM 47B ……………………………………………………… 18RONDCOM 44DX3/44SD3 ………………………………………… 20RONDCOM 43C/41C/31C ………………………………………… 22

Detector Rotating TypeRONDCOM 76A ……………………………………………………… 24RONDCOM 73A ……………………………………………………… 26

Portable Roundness Measuring InstrumentRONDCOM ZERO 1 ………………………………………………… 30

Large-sized Roundness/Cylindrical Profile Measuring InstrumentRONDCOM GRANDE ……………………………………………… 31

Software

ACCTee ……………………………………………………………… 32TiMS …………………………………………………………………… 34

Table Rotating Type RONDCOM OptionsStyli …………………………………………………………………… 36Detectors …………………………………………………………… 40Detector Holders …………………………………………………… 42CNC Detector Holders / Offset Type Detector Holders ……… 43Special Detector Holders ………………………………………… 44Calibrators …………………………………………………………… 45Adjustment Device ………………………………………………… 46Peripherals …………………………………………………………… 47Consumables ………………………………………………………… 49

Detector Rotating Type RONDCOM 73A OptionsDetectors / Holders ………………………………………………… 50Styli …………………………………………………………………… 52Styli (for PA Detector) ……………………………………………… 53Styli (for All-Position Detector) …………………………………… 54

Detector Rotating Type RONDCOM 71C / 72A / 75GB / 76 OptionsDetectors / Holders / Styli ………………………………………… 56Calibrators …………………………………………………………… 62Adjustment Devices ………………………………………………… 63Peripherals / Consumables ……………………………………… 64

Measuring and Immeasurable Ranges of Detectors and Holders(Detector Rotating Type RONDCOM 73A) …………………………… 65

Roundness parameter …………………………………………………… 66

3


Roundness and Cylindrical Profile Measuring Instruments Series

RONDCOM 65A

RONDCOM 55B

RONDCOM 47B

RONDCOM 43C/43C-S

RONDCOM 41C

RONDCOM 31C

RONDCOM 44DX3/SD3

RONDCOM 54DX3/SD3

RONDCOM 60A

● Flagship model of table rotating type measuring instrument

●World’s top level rotation accuracy ●Gabbro and air bearings on R- and

Z-axis contributes to the stable and high accuracy over time

●Rotation accuracy: 0.02 μm ●CNC instrument for large

workpieces

●Rotation accuracy: 0.02 μm ● Support large workpieces

●Rotation accuracy: 0.02 μm ●Compact and high-precision

practical machine

●Practical machine for compact roundness measurement

● Easy operation with support functions

● Entry model for compact roundness measurement

● Easy operation with support functions

●Rotation accuracy of 0.02 μm ●Offset type detector holder

adopted●Upgradeable to CNC instrument

●Compact and high-precision CNC instrument with rotation accuracy of 0.02 μm

●Offset type detector holder adopted

●DX model is all-in-one and space saving design

●Rotation accuracy: 0.02 μm ●Gabbro and air bearings on R-

and Z-axis contributes to the stable and high accuracy over time

Table Rotating Type: CNC

Table Rotating Type: Manual

4

- Detector Rotating Type

RONDCOM 76A

RONDCOM 73A

● Fully automatic operation is possible from positioning to creating measuring data

●High grade 7-axes CNC controlled instrument with reliable air bearings

●World’s top class accuracy● Three times faster driving speed of each

axis● Straightness accuracy on each axis

guaranteed● Flagship model of detector rotating type

measuring instrument

●Highest rotation accuracy in its class: 0.06 μm

● Smaller footprint required ●Auto centering / tilting functions enable

fully automatic measurements● Fully automatic 7-axes control function● Surface analysis functions such as

power spectrum and fourier analysis

5

Lineup of Table Rotating Type RONDCOM series

ModelExternal

view

Measuring method Style Specifications of

detector Specifications of table Specifications of Z-axis column Specifications of R-axis

Exp

ort licen

se

CN

C

Man

ual

All-in-one

type

Sep

arate typ

e

All p

ositio

n

Stan

dard

Stro

ke (μm

)

Wo

rkpiece

perm

issible

weig

ht (kg

)

Ro

tation

accuracy

(μm

)

Dim

ensions (m

m)

Fe

ed

ran

ge

(m

m)

Measuring

item:

Cylindricity /

Rectilinear

measurem

ent

Straightness

accuracy (μm

)

Max. m

easuring diam

eter (mm

)

Feed

rang

e (m

m)

RONDCOM 65A ○ – ○ – ◎ ● ±1000 60 0.01+6H/10000 φ290 500 Possible

0.05/100 mm0.2/500 mm

φ420 220

No

t requ

ired

RONDCOM 60A ○ – – ○ ● ◎ ±800 60 0.02+6H/10000 φ290 500 Possible

0.1/100 mm0.25/500 mm

φ420 220

No

t requ

ired

RONDCOM 55B ○ – – ○ ◎ ● ±1000 60 0.02+6H/10000 φ290 350 Possible

0.15/100 mm0.3/350 mm

φ350 190

No

t requ

ired

RONDCOM 54DX3 ○ – ○ – ◎ ● ±1000 30 0.02+4H/10000 φ220 300 Possible

0.12/100 mm0.2/290 mm

φ300 170

No

t requ

ired

RONDCOM 54SD3 ○ – – ○ ◎ ● ±1000 30 0.02+4H/10000 φ220 300 Possible

0.12/100 mm0.2/290 mm

φ300 170

No

t requ

ired

RONDCOM 47B – ○ – ○ ◎ ● ±1000 60 0.02+6H/10000 φ220 350 Possible

0.15/100 mm0.3/350 mm

φ350 190

No

t requ

ired

RONDCOM 44DX3 – ○ ○ – ◎ ● ±1000 30 0.02+4H/10000 φ220 300 Possible

0.12/100 mm0.2/290 mm

φ300 170

No

t requ

ired

RONDCOM 44SD3 – ○ – ○ ◎ ● ±1000 30 0.02+4H/10000 φ220 300 Possible

0.12/100 mm0.2/290 mm

φ300 170

No

t requ

ired

RONDCOM 43C-S – ○ – ○ ◎ ● ±400 15 0.02+6H/10000 φ148 300 Possible

0.25/100 mm0.8/300 mm

φ200 100

No

t requ

ired

RONDCOM 43C – ○ – ○ ● ◎ ±400 15 0.02+6H/10000 φ148 300 Possible

0.25/100 mm0.8/300 mm

φ250 125

No

t requ

ired

RONDCOM 41C – ○ – ○ ● ◎ ±400 25 0.04+6H/10000 φ148 300 Possible

0.5/100 mm1.5/300 mm

φ250 125

No

t requ

ired

RONDCOM 31C – ○ – ○ ● ◎ ±400 25 0.04+6H/10000 φ148 200 – – φ250 125

No

t requ

ired

6

● means available as option.

Lineup of Detector Rotating Type RONDCOM series

RONDCOM ZERO 1, Portable Type Measuring Instrument

RONDCOM GRANDE, Large-size Measuring Instrument

ModelExternal

view

Measuring method

Specifications of detector Specifications of table Specifications of

Z-axis columnSpecifications

of R-axis

Exp

ort licen

se

CN

C

Man

ual

Stan

dard

PA

Stro

ke (μm

)

Wo

rkpiece

perm

issible

weig

ht (kg

)

Ro

tation

accuracy

(μm

)

X Feed range (m

m)

Y Feed

range (m

m)

Dim

ensions (m

m)

Feed

range

(mm

)

Straightness

accuracy (μm

)

Max. m

easuring diam

eter (mm

)

Feed

rang

e (m

m)

RONDCOM 76A ○ – ● ◎

±500(arm a)

±1000(arm b)

200 0.04+3H/10000 1000 200800×

6801000

0.28/ 50 mm0.37/100 mm0.32/700 mm

φ500 290

No

t requ

ired

RONDCOM 73A ○ – ◎ ● ±800 200 0.06 600 120

600×

5501000 0.9/200 mm φ450 265

No

t requ

ired

ModelExternal

view

Measuring method

Specifications of detector

Rotation accuracy(μm)

Specifications of Z-axis Specifications of R-axis

Export license

CNC Manual Stroke (μm)Feed range (mm)

Straightness accuracy (μm)

Max. measuring diameter

(mm)

Feed range (mm)

RONDCOM ZERO1 – ○ ±300 1 135 1/125 mm φ95 6 Not

required

ModelExternal

view

Measuring method

Specifications of detector Specifications of table Specifications of Z-axis

columnSpecifications

of R-axis

Export license

CN

C

Man

ual

Stan

dard

Stro

ke (μm

)

Workpiece

perm

issible w

eight (kg)

Ro

tation

accuracy

(μm

)

Dim

ensions (m

m)

Feed

range

(mm

)

Straightness accuracy (μm

)

Max. m

easuring diam

eter (mm

)

Feed

rang

e (m

m)

RONDCOM GRANDE ○ – ◎ ±1000 500 0.08+H/1000 φ1650 550 0.15/100 mm

0.5/490 mmφ1650 450 Not

required

7

Roundness / Cylindrical Profile Measuring Instruments

Table-Rotating TypeRONDCOM series

The Ideal Synthesis of Superior Ease of Use and Unprecedented AccuracyCentering / Tilting Support Function (patented)

Our exclusive algorithm makes it easy to perform complex centering and tilting operations

※Standard on the R44DX3/SD3, R47B, R43C, R41C, R31C

Dynamic Calibration Function (patent pending) ※Calibration master is optional.

A block gage and a magnification calibrator are required for ordinal detector magnification calibration, while for dynamic calibration, the optional magnification calibration master (E-MC-R28A) is required.Measurements performed with dynamic calibration are executed in the same way as flatness measurement, simplifying calibration operation.

This function lets you make accurate centering or tilting adjustments simply by setting a bar graph to “zero”, while monitoring the screen. There is no display function on a table, and the same operability is ensured for measurements of a workpiece which is larger than a rotary table or when an optional sub-table is used.

PreparationThe first and the second sections of a workpiece are measured.

Tilting adjustmentAdjustment to match the tilt of the rotational axis of a workpiece and the rotational axis of a table.

Centering adjustmentAdjustment to match the rotational center of a workpiece and that of a table.

Example of Iris Chuck (option) Installation on R44DX3Fixing range: φ5 mm to φ250 mm

Wide Range of Support Enables Magnification-Free Measurement

Measuring instruments equipped with the newly developed high-resolution I. M. R (Infinite Magnification Range) board ensure resolution of 2 nm (2/1000 μm) in the measurement range of ±1000 μm. This is equivalent to a conventional measuring magnification of 10000x. In combination with the centering/tilting support functions, these instruments make possible a tremendous leap in working efficiency.

※Standard equipment for R54DX3/SD3 and R44DX3/SD3.

8

Offset Type CNC Detector Holder

Detector positioning for ID/OD measurements, top/under/tapered surfaces measurements, and so on can be controlled automatically. The same detector is used with all standard type instruments and is also available after upgrades. Once you have both a standard model and the CNC holder model, maintenance costs are reduced.

Applicable models: R65A, R54DX3/SD3 Available as an option

Part programs for inside and outside diameter, flatness, straightness, and other measurements can all be loaded at the same time, greatly increasing measuring efficiency.

Offset Type Detector Holder (patent pending)

Typically, the detector holder on a roundness measuring instrument has a stylus tip placed on the extension of R-axis. This configuration interferes with proper operation of the R-axis arm when measuring workpieces with flanges, the inside diameter of a workpiece with a thick wall between outside and inside diameters, or irregularly shaped workpieces such as connecting rods and die castings.The offset type detector holder offsets the measuring stylus from the center of the R-axis by 80 mm, and it makes measurements possible without interference. The detector can be lined up with the measuring surface just by tilting the detector holder and no set-up changes are required when you want to switch modes from outside diameter measurement to top flatness measurement.

Conventional detector holder Offset type detector holder

Continuous Rotation Measurement

The system can be configured to continuously measure individual step surfaces. Each section is used as a roundness element and rapid measurements can be performed that comply with various standards such as that for shaft center straightness.

9


Table-Rotating Type CNC Measuring Instrument

Highest Rotation Accuracy In its Class: 0.01 μm

Industry’s First High-Accuracy Air Bearings for Z-, R-, and θ-axes.Gabbro is used in the column, base, and R-axis, guaranteeing the top-class high accuracy over time.

World’s Highest Throughput (within 60 seconds for alignment)

Top-Level, Cutting Edge Design Appropriate for a Flagship Model

Air Type Anti-Vibration Table Provided as Standard

Detector with All Orientation Safety FunctionIf stylus overload is detected, the emergency stop function is automatically activated to prevent damage to stylus and detector.

Offset Type Detector Holder Available as an OptionVarious workpieces can be measured easily without interference from the R-axis arm.

On Track to Become No. 1 in the WorldOur customers want the best and at ACCRETECH we are committed to giving it to them, always striving to achieve the world’s highest level of accuracy. The RONDCOM 65A, our flagship model, is a table-rotating type roundness measuring instrument that features reference guideways made of gabbro with minimal susceptibility to age-related deterioration. In addition, a sliding surface with air bearings to lessen friction resistance and advanced correction technology enable this precision instrument to realize nanometer-level accuracy.

Large-Sized Workpiece Can be Measured● Rotation accuracy 0.08 μm● High column 900 mm● Max. measuring diameter φ580 mm● Max. loading weight 250 kg● Max. loading diameter φ900 mm

World’s Top Class Accuracy for Each Axis

Roundness（Using a master ball）

0.05 μm

Vertical direction straightness(Using a straight edge)

0.073 μm

Horizontal direction straightness(Using an optical flat)

0.079 μm

RONDCOM 65A

※ With offset type CNC detector holder (option)

RONDCOM 65A-LH（Main measuring unit)

ACCRETECHINTEGRATEDMEASURINGSYSTEM

10

1639

φ420

500（300）

180

864

1717（High column： 2017）

1639

φ420

500（300）

180

864

1717（High column： 2017）

External view

RONDCOM 65A

Sample of roundness measurement using a non-contact detector (option)

RONDCOM 65A-LH

φ580

900

Specifications

Model

RONDCOM 65A

R65AR65A-LH

High column model

Measuring system CNC and manual

Measuring range

Max. measuring diameter φ420 mm φ580 mm

Right/left feed range (R-axis) 220 mm 340 mm

Up/down feed range (Z-axis) 500 mm 800 mm 900 mm

Max. loading diameter φ680 mm φ900 mm

Max. measuring height

OD* measurement 500 mm 800 mm 900 mm

ID* measurement 500 mm 800 mm 900 mm

Max. measuring depth (Throat height)

150 mm 190 mm

(Limited by size of measuring diameter and combination of detector and stylus)

Rotation accuracy Radial directionJIS B 7451-1997

（0.01+6H/10000） μm （0.08+6H/10000） μm

(H: Height from table top to measuring point mm)

Straightness accuracy

Up/down (Z-axis)direction

Narrow range 0.05 μm/100 mm 0.1 μm/100 mm 0.2 μm/100 mm

Wide range 0.2 μm/500 mm 0.5 μm/800 mm 1.0 μm/900 mm

Radial direction (R-axis) 0.5 μm/200 mm 1.0 μm/200 mm

Parallelism accuracy

Up/down direction (Z-axis) 1.5 μm/500 mm 3.6 μm/900 mm

Radial direction (R-axis) 0.5 μm/200 mm 2.0 μm/200 mm

Indication accuracy Radial direction (R-axis) (2+L/220) μm L: Moving length mm

Rotational speed (θ-axis) 2/min to 10/min(At moving: 20/min)

0.6/min to 6/min(At moving: 6/min)

Up/down speed (Z-axis) Measuring speed 0.6 mm/s to 6 mm/s (At moving: 30 mm/s max.)

Radial direction speed (R-axis) 0.6 mm/s to 6 mm/s (At moving: 20 mm/s max.)

Auto stop accuracy Z-axis/R-axis ±5 μm

Rotary table

Table outside diameter φ290 mm φ400 mm

Adjustment range of centering/tilting ±2 mm/±1 ゜

Load 60 kg 250 kg

DetectorMeasuring force 30 mN to 100 mN (variable)

Stylus shape φ1.6 mm carbide ball, Length: 53 mm

Number of sampling 14400 points/rotation

Type of filter Digital filter Gaussian/2RC

Display maginification 10 to 200k (22 steps), Auto, measuring magnification

Cutoff value

Rotational direction(θ-axis)

Low pass 15, 50, 150, 500, 1500 peaks/rotation, settable any value in range 15 to 1500 peaks/rotation

Band pass 15 to 150, 15 to 500, 15 to 1500 peaks/rotation

Rectilinear direction (Z-axis)

Low pass 0.025, 0.08, 0.25, 0.8, 2.5, 8 mm (any value in 0.0001 mm units)

Roundness evaluation of form error

MZC (min. zone circle method), LSC (least square circle method), MIC (max. inscribed circle method), MCC (min. circumscribed circle method), N.C. (no

compensation), Multi (multiple setting)

Measuring items

Rotational directionRoundness, flatness, flatness (compound), parallelism, concentricity,

coaxiality, cylindricity, diameter deviation, squareness, thickness variation, run-out, radius measurement, partial circle

Rectilinear directionStraightness (Z), straightness (R), taper ratio, cylindricity, squareness, parallelism, diameter

deviation, axis straightness

Analysis processing functions

Notch function (level, angle, cursor), combination of roundness evaluation methods, nominal value

collation, cylinder 3D profile display (line drawing, shading, contour line), real-time display, profile characteristic graph display (bearing area curve, amplitude distribution function, power spectrum),

CNC automatic measuring function, automatic centering/tilting adjustment function

Special function Offset type CNC detector holder (option)

Display (color monitor) 17'' LCD

Display itemsMeasuring conditions, measuring parameters,

comments, printer output conditions, profile graphics (expansion plan, 3D plan), error messages, etc.

Recording system Color or laser printer can be selected

Other

Power supply (Voltage to be specified), frequency AC 100 V to 240 V, 50/60 Hz (grounding required)

Power consumption Approx. 800 VA (except printer)

Air supply

Supply pressure 0.5 MPa to 0.7 MPa

Working pressure 0.4 MPa

Air consumption volume

49 Nℓ /min

Installation dimensions (W x D x H) mm 1900x950x1800 1900x950x2100 2300x950x2235

Weight (except options) 790 kg 910 kg 1010 kg

Tab

le R

ota

tin

g T

ype:

CN

C

11*OD: Outside diameter, ID: Inside diameter



Highest Rotation Accuracy In its Class: 0.02 μm

Industry’s First High-Accuracy Air Bearings for Z-, R-, and θ-axis.Gabbro is used in the column, base, and R-axis which guarantees top-class high accuracy over time.

World’s Highest Throughput (within 60 seconds for alignment)

Diameter Measuring Function (※ Calibration master for R-axis is required)


Teaching Function for Automatic MeasurementFull automatic operation is possible for everything from measuring multiple sections to printing.


Rotation Accuracy of 0.02 μm!Alignment Within 60 Seconds!

Full automatic detector holder (Option)※ Patent pending

RONDCOM 60A※Anti-vibration table and system rack are optional.

12

800

1078 to 1370

716

824

700

（500）

1245

（High column：1545）

800

1074

274900

φ420

500（300）

Specifications

ModelRONDCOM 60A

High column


Measuring range

Max. measuring diameter φ420 mm

Right/left feed range (R-axis) 220 mm

Up/down feed range (Z-axis) 500 mm 800 mm

Max. loading diameter φ680 mm

Max. measuring height OD/ID* measurement: 500 mm OD/ID* measurement: 800 mm

Rotation accuracy

Radial directionJIS B 7451-1997

(0.02＋6H/10000） μm(H: Height from table top to measuring point mm)


Up/down direction(Z-axis)

0.1 μm/100 mm0.25 μm/500 mm

0.2 μm/100 mm0.6 μm/800 mm

Radial direction (R-axis) 0.5 μm/200 mm


Up/down direction (Z-axis) 1.5 μm/500 mm


Scale indication accuracy Radial direction (R-axis) (2+L/200) μm L: Moving length mm

Rotational speed (θ-axis) 2/min to 10/min(At auto centering/tilting: 6/min, 10/min, 20/min)

Up/down speed (Z-axis) 0.6 mm/s to 6 mm/s (At moving: 30 mm/s max.)



Rotary table

Table outside diameter φ290 mm


Load 60 kg




Cutoff value


Low pass 15, 50, 150, 500 peaks/rotation, settable any value in range 15 to 500 peaks/rotation

Band pass 15 to 150, 15 to 500 peaks/rotation


Low pass 0.025, 0.08, 0.25, 0.8, 2.5, 8 mm(any value in 0.0001 mm units)



MZC (min. zone circle method),LSC (least square circle method),

MIC (max. inscribed circle method), MCC (min. circumscribed circle method),

N.C. (no compensation), Multi (multiple setting)

Measuring items

Rotational direction

Roundness, flatness, flatness (compound), parallelism, concentricity, coaxiality, cylindricity,

diameter deviation, squareness, thickness variation, run-out, radius measurement, partial circle

Rectilinear directionStraightness (Z), straightness (R), taper ratio, cylindricity, squareness, parallelism, diameter

deviation, axis straightness





Special function Offset type detector holder (option)


Display itemsMeasuring conditions, measuring parameters, comments, printer output conditions, profile graphics (expansion plan,

3D plan), error messages, etc.


Other

Power supply (Voltage to be specified), frequency AC 100 V, 50/60 Hz (grounding required)

Power consumption 800 VA (except printer)

Air supply




49 Nℓ /min

Installation dimensions (W x D x H) mm 2000 × 950 × 1950 (2100) mm

Weight (except options) 500 (520) kg (except anti-vibration table or system rack)

External view

RONDCOM 60A

OptionsAnti-vibration table: E-VS-S21B (H=700) E-VS-R20B (H=500) E-VA-R24A (for high column)System rack: E-DK-S24A

Sample roundness measurement of inside diameter

Tab

le R

ota

tin

g T

ype:

CN

C

13

*OD: Outside diameter, ID: Inside diameter



Best-in-Class Rotation Accuracy

High Rigidity Rotary Table Supports Large and Heavy Workpieces.

High-Speed Alignment for Highly Efficient Measuring

Teaching Function for Automatic Measurement Full automatic operation is possible for everything from measuring multiple sections to printing.


Roughness Measurement Function (option)

The addition of a roughness measurement function enables roughness measuring on the Z- and R-axis directions.


CNC Machine for Large WorkpiecesOffers Superior Cost Performance

Full automatic detector holder (Option)※ Patent pending

RONDCOM 55B※ Anti-vibration table and system rack are optional.

Roughness measurement function

(option)

14

716

1107


700

（500）

824

800

1074

1070 to 1370

795 236

800

φ350

350（500）

Specifications

ModelRONDCOM 55B

High Column


Measuring range





Max. measuring height OD/ID* measurement: 350 mm OD/ID* measurement: 500 mm

Rotation accuracy


（0.02＋6H/10000） μm(H: Height from table top to measuring point)



0.15 μm/100 mm,0.3 μm/350 mm 0.5 μm/500 mm

Radial direction (R-axis) 1 μm/100 mm


Up/down direction (Z-axis) 1.5 μm/350 mm 2 μm/500 mm

Radial direction (R-axis) 2 μm/100 mm

Scale indication accuracy (option) Radial direction (R-axis) (2+L/185) μm L: Moving length mm

Rotational speed (θ-axis) 2/min to 10/min(At auto centering/tilting: 6/min, 10/min, 20/min)




Rotary table



Load 60 kg




Cutoff value








MZC (min. zone circle method),LSC (least square circle method),

MIC (max. inscribed circle method),MCC (min. circumscribed circle method),


Measuring items


Roundness, flatness, flatness (compound), parallelism, concentricity, coaxiality, cylindricity,

diameter deviation, squareness, thickness variation, run-out, radius measurement,

partial circle

Rectilinear directionStraightness (Z), straightness (R), taper ratio,

cylindricity, squareness, parallelism, diameter deviation, axis straightness





Special function Offset type detector holder (option)





Other

Power supply (Voltage to be specified), frequency AC 100 V, 50/60 Hz (grounding required)


Air supply



Air consumption volume 30 Nℓ /min

Installation dimensions (W x D x H) mm 2000 x 950 x 1850 (2000)

Weight (except options) 400 (420) kg (except anti-vibration table or system rack)

External view

RONDCOM 55B

Options

Anti-vibration table: E-VS-S21B (H=700)

E-VS-R20B (H=500)

System rack: E-DK-S24A

Sample roundness measurement of outside diameter

Tab

le R

ota

tin

g T

ype:

CN

C

15


Offset Type CNC Detector Holder (Patent pending) (option)

Detector positioning for ID/OD measurements, top/under/tapered surfaces measurements, and so on can be control led automatically. The same detector is used with all standard type instruments and is also available after upgrades. Once you have both a standard model and the CNC holder model, maintenance costs are reduced.

Example of effective workpiece measurement with the offset type detector holder



Setting a New World Standard in CNC Instruments

RONDCOM 54DX3

RONDCOM 54SD3※ Anti-vibration table, PC rack and printer are optional.

Compact, High-Accuracy Manual Roundness Measuring InstrumentWith rotation accuracy of (0.02+3.7H/10000) μm, this instrument supports measurement of high-precision components. Assured R-axis indication accuracy improves the reliability of diameter measurements.

Offset Type Detector Holder (Patent pending)

Various workpieces can be measured easily without interference from the R-axis arm. You can switch between outside diameter measurement and top flatness measurement just by tilting the detector holder.

Detector with All Orientation Safety FunctionIf stylus overload is detected, the emergency stop function is automatically activated to prevent damage to stylus and detector.A front adjustment function is also incorporated to support notched workpieces.

Wide Range of Support Enables Magnification-Free MeasurementThe newly developed high-resolution I. M. R (Infinite Magnification Range) board ensures resolution of 2 nm (2/1000 μm) in the measurement range of ±1000 μm. This is equivalent to a conventional measuring magnification of 10000x. In combination with the centering/tilting support functions, these instruments make possible a tremendous leap in working efficiency.

16

990（442）

907

1600（High column: 1800） φ300

300（500）

External view

RONDCOM 54DX3

RONDCOM 54SD3

Options

Anti-vibration table: E-VS-R16B (H=700)


Specifications

Model

RONDCOM 54

DX3 SD3

High column High column


Measuring range

Max. measuring diameter OD*: φ300 mm, ID*: φ360 mm


Up/down feed range (Z-axis) 300 mm 500 mm 300 mm 500 mm


Max. measuring height (OD/ID* measurement) 300 mm 500 mm 300 mm 500 mm


150 mm (Limited by size of measuring diameter and combination of detector and stylus)

Rotation accuracy

Radial direction JIS B 7451-1997 (0.02+3.7H/10000) μm (H: Height from table top to measuring point mm)

Axial direction JIS B 7451-1997 (0.02+3.7R/10000) μm (R: Distance from table rotational center mm)



Wide range 0.11 μm/100 mm

Narrow range 0.17 μm/290 mm 0.23 μm/490 mm 0.17 μm/290 mm 0.23 μm/490 mm



Up/down direction (Z-axis) 0.7 μm/290 mm 1.04 μm/490 mm 0.7 μm/290 mm 1.04 μm/490 mm


Scale Indication accuracy Radial direction (R-axis) (2+L/180) μm L: Moving length mm

Rotational speed (θ-axis) 2/min to 10/min (At moving: 20/min max.)




Rotary table


Adjustment range of centering/tilting ±2 mm/±1 ゜Load 30 kg





Measuring range ±1000 μm, ±200 μm

Cutoff value




Rectilinear direction (Z-axis) Low pass 0.025, 0.08, 0.25, 0.8, 2.5, 8 mm

(any value in 0.0001 mm units)


MZC (min. zone circle method), LSC (least square circle method), MIC (max. inscribed circle

method), MCC (min. circumscribed circle method), N.C. (no compensation), Multi (multiple setting)

Measuring items


Roundness, flatness, flatness (compound), parallelism, concentricity, coaxiality, cylindricity, diameter deviation,

squareness, thickness variation, run-out, radius measurement, partial circle

Rectilinear directionStraightness (Z), straightness (R), cylindricity,

squareness, parallelism, diameter deviation, axis straightness


Centering/tilting support function, notch function (level, angle, cursor), combination of roundness evaluation methods, nominal value collation, cylinder 3D profile

display (line drawing, shading, contour line), real-time display, profile characteristic graph display (bearing area curve, amplitude distribution function, power spectrum), CNC automatic measuring function, wide-range function,

automatic centering/tilting adjustment function

Special functions Offset type detector holder (standard equipment)Offset type CNC detector holder (option)


Display itemsMeasuring conditions, measuring parameters, comments,

printer output conditions, profile graphics (expansion plan, 3D plan), error messages, etc.


Other



Air supply




Installation dimensions (W x D x H) mm 1500ｘ925ｘ1600 1500ｘ925ｘ1800 2050ｘ900ｘ1700 2050ｘ900ｘ1900

Weight (except options) 500 kg 510 kg 194 kg 204 kg

800

980

630 279

800

518

895

700

（High column: 1095）

780

1070 to 1370

φ300

300（500）

Tab

le R

ota

tin

g T

ype:

CN

C

17


Manual Machine for Large WorkpiecesOffers Superior Cost Performance


Table-Rotating Type Manual Measuring Instrument

Max. Loading Diameter: φ600 mm, Max. Measuring Diameter:φ350 mm, Loading Weight: 60 kg (Larger diameter measurement available as special order)

High column specification is ideal for large and small-lot workpieces.

Simple OperationBar graph type centering/tilting function improves user operability and reduces measuring time.

All Position Detector with All Orientation Safety Function Measuring Range: ±1000 μmIf stylus overload is detected, the emergency stop function is automatically activated to prevent damage to stylus and detector. Measuring force adjustment and front adjustment allow measurement of deformable and notched workpieces.

RONDCOM 47B※ Printer is optional.

Shading diagram

3D diagram

18

Specifications

1074

795 203

800

616

1107


700

（500）

824

800

1070 to 1370

φ350

350（500）

External view

RONDCOM 47B

Options

Anti-vibration table: E-VS-S21B (H=700)

E-VS-R20B (H=500)


Sample roundness measurement of outside diameter

ModelRONDCOM 47B

High column

Measuring system Manual

Measuring range


φ350 mm



Max. loading diameter

φ600 mm

Max. measuring height

OD/ID* measurement:350 mm

OD/ID* measurement: 500 mm

Rotation accuracy


(0.02+6H/10000) μm(H: Height from table top to measuring point mm)



0.15 μm/100 mm,0.3 μm/350 mm 0.5 μm/500 mm


Up/down direction (Z-axis) 1.5 μm/350 mm 2 μm/500 mm

Rotational speed (θ-axis) 6/min




Rotary table

Table outside diameter

φ220 mm


Load 60 kg




Cutoff value








MZC (min. zone circle method), LSC (least square circle method),

MIC (max. inscribed circle method), MCC (min. circumscribed circle method),


Measuring itemsRotational direction

Roundness, flatness, parallelism, concentricity, coaxiality, cylindricity, diameter deviation, squareness, thickness variation, run-out,

partial circle

Rectilinear direction Straightness (Z), taper ratio, cylindricity, squareness, parallelism


Centering/tilting support function, notch function (level, angle, cursor), combination of roundness

evaluation methods, nominal value collation, cylinder 3D profile display (line drawing, shading, contour

line), real-time display, profile characteristic graph display (bearing area curve, amplitude distribution

function, power spectrum), semiautomatic measuring function, automatic centering/tilting

adjustment function


Display items

Measuring conditions, measuring parameters, comments, printer output conditions, profile

graphics (expansion plan, 3D plan), error messages, etc.


Other

Power supply (Voltage to be specified), frequency

AC 100 V to 240 V, 50/60 Hz (grounding required)


Air supply




30 Nℓ /min

Installation dimensions (W x D x H) mm 2000 × 950 × 1850 (2000) mm

Weight(except options) 300 (320) kg

Tab

le R

ota

tin

g T

ype:

Man

ual

19




Designed to Deliver the World's Highest Standard of Performance

Example of effective workpiece measurement with the offset type detector holder

Conventional measuring instrument

RONDCOM 44 and 54 series

Manualmachine Repurchase

Upgrade

RONDCOM 44 RONDCOM 54

CNCmachine

Upgradeable from Manual to CNC (Patent pending)

A simple upgrade procedure lets you easily convert the manual type RONDCOM 44 into the CNC type RONDCOM 54. The original footprint remains unchanged so there is no disruption to your workspace. So even when a manual machine has been installed because only a small number of workpieces need to be measured, you can upgrade it at any time as needed.

Centering/Tilting/Leveling Support FunctionsEasily adjust eccentricity and tilt between the center of rotation and the center of the workpiece simply by adjusting the displacement to zero as indicated on the bar graph in the alignment display.

Compact, High-Accuracy Manual Roundness Measuring InstrumentWith rotation accuracy of (0.02+3.7H/10000) μm, this instrument supports measurement of high-precision components. Assured R-axis indication accuracy improves the reliability of diameter measurements.

Offset Type Detector Holder (Patent pending)

Various workpieces can be measured easily without interference from the R-axis arm. You can switch between outside diameter measurement and top flatness measurement just by tilting the detector holder.

RONDCOM 44DX3

RONDCOM 44SD3※ Anti-vibration table, PC rack and printer are optional.

20

Specifications

Model

RONDCOM 44

DX3 SD3

High column High column

Measuring system Manual

Measuring range


OD*: φ300 mm, ID*: φ360 mm


Up/down feed range (Z-axis) 300 mm 500 mm 300 mm 500 mm

Max. loading diameter φ580 mmMax. measuring height (OD/ID* measurement) 300 mm 500 mm 300 mm 500 mm


150 mm (Limited by size of measuring diameter and combination of detector and stylus)

Rotation accuracy

Radial direction JIS B 7451-1997

(0.02+3.7H/10000) μm (H: Height from table top to measuring point mm)

Axial direction JIS B 7451-1997

(0.02+3.7R/10000) μm (R: Distance from table rotational center mm)



Wide range 0.11 μm/100 mm

Narrow range 0.17 μm/290 mm 0.23 μm/490 mm 0.17 μm/290 mm 0.23 μm/490 mm



Up/down direction (Z-axis) 0.7 μm/290 mm 1.04 μm/490 mm 0.7 μm/290 mm 1.04 μm/490 mm


Indicationaccuracy Radial direction (R-axis) (2+L/180) μm L: Moving length mm

Rotational speed (θ-axis) 2/min to 10/min (At moving: 20/min max.)




Rotary table

Table outside diameter φ220 mmAdjustment range of centering/tilting ±2 mm/±1 ゜

Load 30 kg





Measuring range ±1000 μm, ±200 μm

Cutoff value







MZC (min. zone circle method), LSC (least square circle method), MIC (max. inscribed circle method),

MCC (min. circumscribed circle method), N.C. (no compensation), Multi (multiple setting)

Measuring items


Roundness, flatness, flatness (compound), parallelism, concentricity, coaxiality, cylindricity, diameter deviation,

squareness, thickness variation, run-out, radius measurement, partial circle

Rectilinear directionStraightness (Z), straightness (R), cylindricity,

squareness, parallelism, diameter deviation, axis straightness


Centering/tilting support function, notch function (level, angle, cursor), combination of roundness evaluation methods, nominal value collation, cylinder 3D profile

display (line drawing, shading, contour line), real-time display, profile characteristic graph display (bearing area curve, amplitude distribution function, power spectrum), semiautomatic measuring function, wide-range function

Special functions Offset type detector holder (standard equipment)Upgrade to RONDCOM 54 is possible





Other



Air supply




30 Nℓ /min

Installation dimensions (W x D x H) mm 1500ｘ925ｘ1600 1500ｘ925ｘ1800 2050ｘ900ｘ1700 2050ｘ900ｘ1900

Weight (except options) 500 kg 510 kg 194 kg 204 kg

990（442）

907

1600（High column：1800） φ300

300（500）

External viewRONDCOM 44DX3

Wide Range of Support Enables Magnification-Free MeasurementThe newly developed high-resolution I. M. R (Infinite Magnification Range) board ensures resolution of 2 nm (2/1000 μm) in the measurement range of ±1000 μm. This is equivalent to a conventional measuring magnification of 10000x. In combination with the centering/tilting support functions, these instruments make possible a tremendous leap in working efficiency.

800

980

630 279

800

518

895

700

（High column: 1095）

780

1070 to 1370

φ300

300（500）

RONDCOM 44SD3

Options

Anti-vibration table: E-VS-R16B (H=700)


Tab

le R

ota

tin

g T

ype:

Man

ual

21


Semi-Automatic Measuring Function with Specification of Measuring Height

R-axis Scale for Small, High-Accuracy Workpieces (R43C-S)

R41C Supports High Column: Z = 500 mm (option)

Bar Graph Centering/Tilting Support Function (patented) This function reduces time-consuming alignment procedures.



Compact Desktop Roundness Measuring Instruments with High-End Analysis Functions Offer Superior Cost Performance

RONDCOM 31C※ Printer is optional.

RONDCOM 41C※ Printer is optional.

RONDCOM 43C※ 2:1 sensitivity stylus and detector, printer are optional.RONDCOM 43C-S※ Printer is optional.

ACCTee support funtion

22

800

803


642

600

621 60

800

415

728

703

530

1070 to 1370

φ250

300

φ250

300

φ250

300（500）

SpecificationsModel

RONDCOM series

RONDCOM 43C-S RONDCOM 43C RONDCOM 41C RONDCOM 31CMeasuring system Manual

Measuring range

Max. measuring diameter φ200 mm φ250 mmRight/left feed range (R-axis) 100 mm 125 mm

Up/down feed range (Z-axis)

Standard 300 mm 200 mm

High column — 500 mm —

Max. loading diameter φ400 mmMax. measuring height (OD/ID* measurement)

Standard 520 mm/300 mm 420 mm/200 mm

High column — 720 mm/500 mm —

Rotation accuracy


（0.02＋6H/10000） μm （0.04+6H/10000） μm(H: Height from table top to measuring point mm)


Up/down direction (Z-axis)

Standard 0.25 μm/100 mm,0.8 μm/300 mm

0.5μm/100 mm,1.5 μm/300 mm —

High column — 0.5 μm/100 mm,

2.5 μm/500 mm —

Radial direction (R-axis) 0.2 μm/10 mm —


Up/down direction (Z-axis)

Standard 1.5 μm/300 mm 3 μm/300 mm —

High column — 5 μm/500 mm —

Radial direction (R-axis) (0.3+0.1L/10) μm —

Rotational speed (θ-axis) 6/min

Up/down speed (Z-axis) 0.6 mm/s to 6 mm/s(At moving: 15 mm/s max.) 5 mm/s

Radial direction speed (R-axis) 0.6, 1.5, 3, 6 mm/s 5 mm/s


Rotary table

Table outside diameter φ148 mmAdjustment range of centering/tilting ±2 mm/±1 ゜

Load 15 kg 25 kg

Detector

Detection range, Measuring force ±400 μm/70mN

Stylus shape φ1.6 mm carbide ball

Stylus length 54.5 mm 15.5 mm


Cutoff value





Low pass 0.025, 0.08, 0.25, 0.8, 2.5, 8 mm(any value in 0.0001 mm units) —





Measuring items

Rotational directionRoundness, flatness, parallelism, concentricity, coaxiality,

squareness, thickness variation, run-out, partial circle

Cylindricity, diameter deviation —

Rectilinear direction Straightness (Z), taper ratio, cylindricity, squareness, parallelism —


Centering/tilting support function, notch function (level, angle, cursor), combination of roundness

evaluation methods, nominal value collation, cylinder 3D profile display (line drawing, shading, contour line), real-time display, profile characteristic graph display (bearing area curve, amplitude distribution function, power spectrum), semiautomatic measuring function





Other

Power supply (Voltage to be specified), frequency AC 100 V to 240V, 50/60 Hz (grounding required)


Air supply

Supplypressure 0.35 MPa to 0.7 MPa



30Nℓ /min

Installation dimensions (W x D x H) mm

Standard 1800×950×1600 1800×950×1500 1800×950×1400

High column — 1800×950×1900 —

Weight(except options)

Standard 130 kg 120 kg

High column — 140 kg —

External view

RONDCOM 43C

Options

Desktop anti-vibration table: E-VS-S57B

Bench for desktop anti-vibration table: E-VS-S13A


Why RONDCOM 31C can measure coaxially and concentricity without cylindrical and roundness measuring

functions

RONDCOM 31C is not equipped with a Z-axis column that supports measurement of roundness and parallelism. Though this means that it is not equipped with cylindricity and straightness measuring functions, coaxiality and concentricity evaluation data is only the circle center data (center point) calculated from the roundness profile of each section. Since circle center data does not fluctuate in accordance with the size of or variations in the circumference, this means that the R31C also is capable of coaxiality and concentricity measurements of center point deviation.

RONDCOM 41C RONDCOM 31C

※ Unspecified dimensions are the same as R43C

Tab

le R

ota

tin

g T

ype:

Man

ual

23



Detector-Rotating Type CNC Measuring Instrument

The Highest Rotation Accuracy In its Class.Driving Speed for Each Axis Now Three Times Faster.Straightness Accuracy for Each Axis is Ensured.The Flagship Model of Detector-Rotating Type Instruments.

Rotation Accuracy: 0.1 μm (JIS B7451)

Column Straightness Accuracy: 1.3 μm/700 mm (When a 700 mm long-shaft measuring tool is used.)

Industry’s First High-Accuracy Air Bearings for X-, Y-, Z-, and θ-axis.Gabbro is used in the column and base, assuring top-class high accuracy over time.

Fully Automatic 7-axis Control

The Straightness Accuracy of the XY Table and R axis is AssuredAssured straightness accuracy on the table allows parallelism evaluations between bores of cylinder blocks.

Max. Driving Speed: 100 mm/s, Shortened Measurement Time Improves Efficiency

Fully Automatic Measurement of Multiple Workpieces

Automatic Part Program Call Function (option)

Crankshaft

Cylinder block

■ Example applicatoins

RONDCOM 76A※ Long shaft measuring tool is optional.

24

4100

4200

550

1600

2050

2200

420

200

200

190

300

950950

Air in

Measuringunit

Control unitOperation box

Front view

Top view

Side view

2050

1000

100 100

1247

757

74114

200

2670

0

436

820

1122

370

1436

710

600 550

680

CYLI

ND

RICA

L FO

RM M

EASU

RIN

G IN

STRU

MEN

T

350350350350

800

3200

800

2200

External view SpecificationsModel RONDCOM 76A


Measuring range

Max. measuring diameter φ500 mmMin. measuring inside diameter Stylus tip diameter + 2 mm or moreRight/left feed range (X-axis) 700 mmForward/backward feed range (Y-axis) 200 mm

Up/down feed range (Z-axis) 1000 mmR-axis feed range 290 mmMax. loading diameter φ980 mm

Rotation accuracy

Radial direction JIS B 7451-1997

0.04+3H/10000 μm (H: Height from mounting surface to stylus) 0.097 μm (H=189), 0.13 mm (H=314), 0.26 μm (H=736)

Axial direction JIS B 7451-1997

0.1+8R/10000 μm (R: Radial length from center of θ-axis to stylus tip)0.14 μm (R=50), 0.18 μm (R=100), 0.22 μm (R=150)

Angle resolution 0.025°


Up/down direction (Z-axis) (0.2+8L/10000) × (1+S/1000) μm(L: Measuring length, S: Height from mounting surface to stylus tip)

Radial direction (R-axis) 0.5+L/300 μm (L: Measuring length)0.83 μm (L=100), 1.47 μm (L=290)

Table right/left directon (X-axis) 0.5 μm/100 mm, 1.6 μm/700 mmTable forward/backward direction (Y-axis) 0.5 μm/100 mm, 0.6 μm/200 mm

Position display resolution Each X, Y, Z-axis 0.001 mm


Up/down direction (Z- and θ -axis) 0.8 μm/200 mmRadial direction (R-axis) 1.0 μm/200 mm

R-axis diameter measuring accuracy 3+5 (L+S)/1000 μm(L: Measuring length, S: Height from mounting surface to stylus tip)

Measuring speed

Rotational direction (θ -axis) 2 /min to 4 /min (At automatic centering: 10 /min)

Measuring speed

Up/down (Z-axis) 0.6 mm/s to 10 mm/s (At moving: 100 mm/s max.)Right direction (X-axis) 0.6 mm/s to 10 mm/s (At moving: 100 mm/s max.)Forward/backward (Y-axis) 0.6 mm/s to 10 mm/s (At moving: 100 mm/s max.)Radial direction (R-axis) 0.6 mm/s to 10 mm/s (At moving: 100 mm/s max.)

Auto stop ±5 μm (5 mm/s or less)

Table

Dimensions (W x D) 800×680Adjustment range of centering/tilting (1/3 or less of measuring diameter)±1°

Load 200 kg

DetectorDetection range ±500 μm (arm a), ±1000 μm (arm b)Measuring force 130 mN (arm a), 65 mN (arm b)Stylus shape R0.25 mm sapphire

Number of sampling 14400 points/rotationType of filter Digital filter Gaussian/2RC/spline/R-spline

Cutoff value

Rotational direction(θ -axis)


Band pass 15 to 150, 15 to 500 peaks/rotationRectilinear direction (Z-axis)






Measuring items

Rotational directionRoundness, flatness, parallelism, concentricity,

coaxiality, cylindricity, diameter deviation, squareness, thickness variation, run-out, parallelism (axis)

Rectilinear direction Straightness (Z), straightness (R, X, Y), taper raio, cylindricity, squareness, parallelism,


CNC measuring function, auto centering function, auto tilting function, notch function (level, angle, cursor),

combination of roundness evaluation methods, nominal value collation, cylinder 3D profile display (line drawing,

shading, contour line), real-time display, profile characteristic graph display (bearing area curve, amplitude distribution function, power spectrum)




Other

Power supply (Voltage to be specified), frequency AC 100 V to 240V, 50/60 Hz

Power consumption 1k VA (except printer)

Air supply

Supply pressure 0.5 MPa to 0.7 MPaWorking pressure 0.4 MPa


Installation dimensions

（W） Measuring unit: 2200 mm, control unit: 800 mm（D） Measuring unit: 2050 mm, control unit: 800 mm（H） Measuring unit: 3200 mm, control unit: 1400 mm

Weight Measuring unit: 6700 kg, control unit: 100 kg

Det

ecto

r R

ota

tin

g T

ype

25


Detector-Rotating Type CNC Measuring Instrument

Rotation Speed: 4/min, Rotation Accuracy: 0.06 μｍWith a rotation speed of 4/min (twice as fast as existing instruments) and rotation accuracy guaranteed at 0.06 μm (a long shaft measuring tool: 0.6 μm) which is the highest in its class, the RONDCOM 73A dramatically increases measuring throughput.

High Z-axis Straightness and Parallelism AccuracyRONDCOM 73A guarantees Z-axis straightness accuracy of 0.9 μm/200 mm or less which is the highest in its class. Z-axis parallelism is 0.9 μm/100 mm or less which is also the highest in its class.

World’s Top Level Rotation AccuracyCNC Measuring Instrument

Highest accuracy in its classSmall footprint, but wider measuring rangeEnergy-saving design (Less air consumption)

Data shows an example when measuring with H: 0 to 200 mm

RONDCOM 73A

26

Measuring Height: 1015 mmThe measuring height is 1015 mm which is the highest in its class (with standard detector holder). The height of the machine itself is 2500 mm, about 14 % less than existing machines.

Y-axis Stroke: 120 mmThe Y-axis stroke is 120 mm. This is the deepest in its class (±60 mm) and 2.4 times deeper than that of any existing machine.

Smaller FootprintRONDCOM 73A achieved a 27 % reduction of width and a 24 % reduction of footprint, while utilizing 600 mm of X-stroke and an increased Y-stroke to 120 mm.

Max. Loading Diameter:φ900 mmMax. loading diameter is φ900 mm which is the widest in its class (equivalent to existing machines).

Table Tilting Range: ±1° (2°)The tilting range of the measuring table is ±1° (equivalent to existing machine), facilitating quick auto alignment.

Reduced Mass to 50 %RONDCOM 73A improved functions and accuracy with light-weight and compact components design. The use of common parts with table rotating type machines leads to a reduction in the quantity of parts.

３９０４５０３９０

５００５００１０６０

３０３０

６００３００３００

（Ｘ-stroke）（Ｘ-stroke）

（Z-Stroke）

（Y-Stroke）

（R-Stroke）

（Y-Stroke）

２５００

８７．５１２３５

８７．５１２０６

１５

４９０６５６６５３０

１４５５１８４

５５０

６０６０

３０

１００

７６０

１２５０

1000

２６５

２３４．５

２３５

３９０４５０３９０

φ900 mm φ900 mm

450 mm

φ900 mm

120 mm

Det

ecto

r R

ota

tin

g T

ype

27

R-axis Feed Range: 265 mmAt 265 mm, the R-axis feed range is the widest in its class (equivalent to our existing instruments).This eliminates the need to change detector positions to accommodate different measuring diameters.

CNC Functions as StandardAuto-centering / Auto-tilting / Auto-leveling functions

These functions correct the eccentricity between the center of workpiece and the center of rotation axis to an appropriate calculation range or a user-specified value. A software-controlled auto alignment function helps reduce the time it takes to align a workpiece, enhancing efficiency and productivity.

CNC measuring function with ACCTee

The CNC measuring program makes possible a full set of automatic operations – from measurement to inspection report creation. ACCTee helps generate the CNC measuring program by operating the instrument in a virtual software environment. This function not only dramatically speeds up measuring operations, it also reduces programming time.

Required Minimum Air Pressure: 0.35 MPaRequired air pressure has been significantly reduced and there is no need to boost air pressure, eliminating the need for additional incidental equipment such as a booster unit.

Common Use of Detectors for Various ApplicationsOptional detectors for our detector-rotating type roundness measuring instruments can be used (conversion adopters required).

Detector with All-Direction Safety FunctionAll position detector can be used. The all direction safety function is automatically activated, stopping operation in the event of a collision with a workpiece.

Safety Device and Auto Balancing Mechanism on R-axisProvided as standard, the detector holder safety device identifies a collision between a workpiece and a detector. An auto balancing mechanism is also provided on the R-axis, so there is no need to adjust a counterweight to accommodate different measuring diameters.

■ Part programming can be edited easily

Position of the safety device attached.Detecting direction is downward and horizontal (all-direction).

R-axis

Toolbar for a CNCmeasurement

Icons CNC command

Edit display of CNCpart programming

28

３００

１９０

２１３．５

１１４６

３００

２７８５

１５０８００３００

５００５００

３１５５

１４００

８００

１１７．５１１７．５

１４００

１４５５

３００１２３５

８５００Ｎ（Ø１４０）

５０００Ｎ（Ø１４０）

５０００Ｎ（Ø１４０）

５ｍ２ｍ

Ø８

３９０４５０３９０

５００５００１０６０

３０３０

６００３００（Ｘ stroke）

３００（Ｘ stroke）

２５００

８７．５１２３５

８７．５

ＡＣＣＲＥＴＥＣＨ

３９０４５０３９０

１２０６

１５

４９０６５６６５３０

１４５５１８４

５５０

６０（Ｙ stroke）


３０

１００

７６０

１２５０

１０００（Ｚ stroke）

２６５

２３４．５

２３５

（Ｒ stroke）

※空気源接続用ニップル　：　外径φ8mmホース用ワンタッチ管継手

３００

１９０

２１３．５

１１４６

３００

２７８５

１５０８００３００

５００５００

３１５５

１４００

８００

１１７．５１１７．５

１４００

１４５５

３００１２３５

８５００Ｎ（Ø１４０）

５０００Ｎ（Ø１４０）

５０００Ｎ（Ø１４０）

５ｍ２ｍ

Ø８

３９０４５０３９０

５００５００１０６０

３０３０



２５００

８７．５１２３５

８７．５


３９０４５０３９０

１２０６

１５

４９０６５６６５３０

１４５５１８４

５５０



３０

１００

７６０

１２５０


２６５

２３４．５

２３５

（Ｒ stroke）


Front view

Side view

External view Specifications

Standard layout (Top view)

Model RONDCOM 73A


Max. measuring height 1015 mm (with standard detector)630 mm (with 620 mm long shaft measuring tool)

Right / left feed range (X-axis) 600 mm (±300 mm)

Forward/backward feed range (Y-axis) 120 mm (±60 mm)

Up/down feed range (Z-axis) 1000 mm

R-axis feed range 265 mm

Table dimensions 600 mm (W) x 550 mm (D)

Max. permissible loading weight 200 kg

Position of center gravity of workpiece Within the range of φ200 mm of tableTilting adjustment range 2° (±1°)

X-axis driving speed 30 mm/s max.

Y-axis driving speed 30 mm/s max.

Radial rotation accuracy 0.06 μm (with standard detector) 0.6 μm (with 620 mm long shaft measuring tool)

Axial rotation accuracy (Measuring radius: 50 mm)

0.2 μm (with standard detector) 0.4 μm(with 620 mm long shaft measuring tool)

θ-axis rotational speed 1 to 6/min (at measuring) 10/min max.

Z-axis straightness accuracy 0.9 μm/200 mm (with standard detector)

Parallelism (Up/down direction: Z-axis) 0.9 μm/100 mm

Z-axis driving speed 0.6 mm/s to 6 mm/s (at measuring) 30 mm/s max.

R-axis driving speed 30 mm/s max.

Software ACCTee

Measuring unit dimensions 1235 mm (W) × 1455 mm (D) × 2500 mm (H)

Control unit dimensions 800 mm (W) × 800 mm (D) × 1400 mm (H)

Table surface height 760 mm

Measuring unit weight 1500 kg

Control unit weight 100 kg

Voltage Single-phase AC 100 V to 240 V ±10 % 50/60 Hz


Air supply pressure 0.35 MPa to 0.7 MPa


Air consumption 30 Nℓ /minConnecting nipple for air supply One-touch pipe joint for outer diameter φ8 mm hose

■ Standard configuration and accessories

・Measuring unit

・Table (with auto-centering and auto-tilting functions)

・Air bearing clamper

・Rotation clamper

・Detector holder ［E-DH-R550A］・Detector ［E-DT-R244A］・Stylus ［0194412］・Master ball ［E-MG-R01B (Sphericity: 0.05 μm)］・Interface controller (data processor)

・Operation box with mobile stand

・17-inch LCD monitor, keyboard, mouse

■　Options

・A4 color inkjet printer

・System rack ［E-DK-R73A］・Magnification calibration set ［E-MC-R04A］・Cylindrical square ［E-MG-R06A/R08A/R83A］・Long shaft measuring tool

・PA detector ［E-DT-R259A］・Cam hole detector ［E-DT-R260A］・All position detector ［E-DT-R253A］・All position detector holder ［E-DH-R533A］

３００

１９０

２１３．５

１１４６

３００

２７８５

１５０８００３００

５００５００

３１５５

１４００

８００

１１７．５１１７．５

１４００

１４５５

３００１２３５

８５００Ｎ（Ø１４０）

５０００Ｎ（Ø１４０）

５０００Ｎ（Ø１４０）

５ｍ２ｍ

Ø８

３９０４５０３９０

５００５００１０６０

３０３０



２５００

８７．５１２３５

８７．５


３９０４５０３９０

１２０６

１５

４９０６５６６５３０

１４５５１８４

５５０



３０

１００

７６０

１２５０


２６５

２３４．５

２３５

（Ｒ stroke）


Det

ecto

r R

ota

tin

g T

ype

29


Portable Roundness Measuring Instrument

Portable Roundness Measuring InstrumentSpecialized in Cylinder Bore Measurement

Compact, Lightweight Design Ideal for Shop Floors

Quick Centering in Cylinder Bore Measurement

Replaceable Stylus can Accommodate Differences in Diameter of Up To 25 mm

Specifications

Model RONDCOM ZERO 1

Measuring range φ70 mm toφ90 mm (25 mm of radial difference)

Max. measuring length 135 mm

Rotation accuracy 1 μm

Straightness accuracy 1 μm/125 mm

Parallelism 1.5 μm/125 mm

Weight 5.8 kg

The above interface unit and the control panel are included with

RONDCOM ZERO 1.

* A PC is also a standard accessory.

Calibration of detector is available on a setting stand.

RONDCOM ZERO 1

30


Large-sized Roundness/Cylindrical Profile Measuring Instrument

Table Rotating Type Roundness Measuring Instrument Designed for High-Precision Measurements of Large, Heavy Workpieces

Incorporates Newly Developed High Precision Air-Bearings

Ideal for Evaluations of High Precision Bearings for Wind Energy Generation Equipments and Large Industrial Machine Tools.

Flexible R-axis Provides a Wide Range of Measuring Diameters from Small to Large.

GRANDE DuO, Double-Column Model, can Measure Both Roughness and Contour Profile.

Specifications

Model RONDCOM GRANDE

Measuring range


R-axis stroke (right/left) 450 mm

Z-axis stroke (up/down) 550 mm


Max. measuring height 500 mm

Rotation accuracy

Radial direction (0.08+H/1000) μm(H: Height from table surface) mm

Axial direction (0.2+R/1000) μm(R: Radius from table center) mm


Z-axis 0.15 μm/100 mm , 0.5μm/490 mm

R-axis 0.1 μm/200 mm , 2 μm/400 mm

ParallelismZ-axis 1.8 μm/350 mm

R-axis 2 μm/200 mm

Rotary table

Table outside diameter 1650 mm

Centering adjustment range ±10 mm

Tilting adjustment range ±0.5°

Max. loading weight 500 kg

Weight Permissible eccentric weight 10000 kg/ mm

RONDCOM GRANDE DuO

Po

rtab

le /

Lar

ge

-siz

ed

Mea

suri

ng

Inst

rum

ent

31


Software

Easy-to-Use Interface for Leading-Edge Operability

ACCTee is equipped with a Windows style user interface that is easy for anyone to understand and use. User-friendly and intuitive

icons guide you through a series of operations from measurement to the printing of analysis results.

Our newly developed ACCTee software represents the next generation of integrated TiMS software. Based on a new concept in measurement that combines document-based measurement and analysis with leading-edge operability and an intuitive work environment, ACCTee makes all operations available in the document (measurement result sheet), and enables all data and information to be saved with related data . Setting wizards simplify instrument setup and configuration, making it possible for anyone to easily perform a variety of measurement and analysis tasks, optimizing throughput and performance. This is the "All in the Document", next generation integrated software, ACCTee.

TOKYO SEIMITSUACCRETECH

INTEGRATED

MEASURING

SYSTEM

ACCTee Integrated Analysis Software

Smart tool bar Menu icon

Data poolAnalysis area

Click the mouse on data in

the Analysis area to display

a Menu icon corresponding

to the clicked data.

One click of the icon adds

a display item and saves or

opens documents.

In this area, a list of actually

executed operations such

as measurement, analysis

and so on is displayed.

The Print layout of the

Data sheet for the analysis

of measurement data and

measurement resul t is

displayed here.

Easy ModeIdeal for manual measuring systems and inexperienced users, the Easy mode features a comprehensive set of wizards to guide you through a wide range of operations.

Simply select the item you want to measure and set the

measurement conditions

by following the steps in

the appropriate wizard. If

you do not need to change

any settings, just select the

measurement item and click

the measurement button to

execute measurement.

Expert ModeIn the Expert mode you can create a CNC program without having to actually operate the measuring instrument.

Then simply run the CNC program to run through all

operations from workpiece measurement to results output.

This mode is ideal for users

of automated instruments

and for expert users.

New Measurement Style with New ConceptAll Measurements and Analyses Available in a Document

32

Detector Calibration Wizard

With ACCTee's detector calibration wizard, you

can calibrate sensitivity by selecting any of the

following three options: Magnification calibration,

Block gage, Level difference master. Next,

specify the calibration condition by entering a

reference value). Once the installation method

for the calibration unit and the measurement

start position have been confirmed, calibration

is executed. The wizard takes you step by step

through the procedure, making sure you get it

right.

Change of Analysis Condition with Preview Function

ACCTee's analysis condition setting lets make changes

to the Centering method, filter, notch setting and other

parameters. You can see the analysis results in a preview

display, and use trial and error analysis to select the

optimum analysis condition.

Gear Tip Analysis (Patented)

Facilitating automatic gear

tip surface recognition and

enabling roundness evaluation

just using the gear tip surface,

this function eliminates the

need to set a number of notch

segments.

Straightness Measurement Function with Edge Detection (Patent pending)

This function automatically identifies the edge-to-edge

distance of a workpiece and sets a measuring length. It is

ideal for rectilinear measurements of workpieces such as

crankshafts.

Help System

Help is always available

whenever ACCTee is

on. ACCTee features an

on-line manual system

so that an appropriate

help message can be

displayed by clicking the

soft help key. Help can

also be obtained by browsing the index or searching with

keywords.

Self-Diagnosis Function

Always running in

the background,

the built-in self-

diagnosis function

provides valuable

support whenever

you run into trouble.

Error messages let

you know where the problem is, what it is, and what the

possible solution, allowing you to immediately take the

appropriate action in order to resolve the problem as soon

as possible.Specifications of ACCTee Roundness

↑Before change of analysis condition

↑After change of analysis condition

Ex. Lower limit value designation of notch

Digital filter types Gaussian filter, phase compensation 2RC filter, spline filter, robust (spline) filter

Cutoff values

Rotation direction(θ-axis)

Low pass: 15, 50, 150, 500, 1500 peaks/rotation, any value in range 15 to 1500 peaks/rotation

Band pass: 15 to 150, 15 to 500, 15 to 1500 peaks/rotation

Rectilinear direction (Z-axis) Low pass: 0.025, 0.08, 0.25, 0.8, 2.5, 8 mm (settable in 0.0001 mm units)

Roundness evaluation of profile error MZC (min. zone circle method), LSC (least square circle method), MIC (max. inscribed circle method), MCC (min. circumscribed circle method), N.C. (no compensation), Multi (multiple setting)

Measuringitems


Roundness, flatness, flatness (compound), parallelism, concentricity, coaxiality, cylindricity, squareness, run-out, thickness variation, diameter deviation, radius measurement, partial circle

Rectilinear direction

Straightness (Z), straightness (R), axis straightness, diameter deviation, cylindricity, squareness, parallelism, straightness with edge detection function (can be used for R65, R60, R55, R73)

Detector Polarity and automatic measurement direction distinction function

Master for detector calibration Magnification calibration, block gage, level difference master can be used

Calibration support Set by the guidance method by the wizard, calibration alarm function

Number of sampling points 14400 points/rotation

Analysis processing functions"＊" represents the standard equipment for CNC machines

Display items（2D, 3D, rectilinear expansion, parameters, measuring conditions), centering/tilting support function, notch/gear tip analysis (level, angle, cursor), combination of roundness evaluation methods, nominal value collation, cylinder 3D profile display (line

drawing, shading, contour line), real-time display, profile characteristic graph display (bearing area curve, amplitude distribution function, Power spectrum, fourier table), CNC automatic measurement*, automatic centering/tilting adjustment*

Special functions Easy operation"Easy mode" / for CNC "Expert mode", wide-range, security function by password, error self-diagnosis function

So

ftw

are

33

Detector Calibration Wizard

With ACCTee's detector calibration wizard, you

can calibrate sensitivity by selecting any of the

following three options: Magnification calibration,

Block gage, Level difference master. Next,

specify the calibration condition by entering a

reference value). Once the installation method

for the calibration unit and the measurement

start position have been confirmed, calibration

is executed. The wizard takes you step by step

through the procedure, making sure you get it

right.

Change of Analysis Condition with Preview Function

ACCTee's analysis condition setting lets make changes

to the Centering method, filter, notch setting and other

parameters. You can see the analysis results in a preview

display, and use trial and error analysis to select the

optimum analysis condition.

Gear Tip Analysis (Patented)

Facilitating automatic gear

tip surface recognition and

enabling roundness evaluation

just using the gear tip surface,

this function eliminates the

need to set a number of notch

segments.

Straightness Measurement Function with Edge Detection (Patent pending)

This function automatically identifies the edge-to-edge

distance of a workpiece and sets a measuring length. It is

ideal for rectilinear measurements of workpieces such as

crankshafts.

Help System

Help is always available

whenever ACCTee is

on. ACCTee features an

on-line manual system

so that an appropriate

help message can be

displayed by clicking the

soft help key. Help can

also be obtained by browsing the index or searching with

keywords.

Self-Diagnosis Function

Always running in

the background,

the built-in self-

diagnosis function

provides valuable

support whenever

you run into trouble.

Error messages let

you know where the problem is, what it is, and what the

possible solution, allowing you to immediately take the

appropriate action in order to resolve the problem as soon

as possible.Specifications of ACCTee Roundness

↑Before the change of the analysis condition

←After the change of the analysis condition

Ex. Lower limit value designation of notch

Digital filter types Gaussian filter, phase compensation 2RC filter, spline filter, robust (spline) filter

Cutoff values

Rotation direction(θ-axis)

Low pass: 15, 50, 150, 500, 1500 peaks/rotation, any value in range 15 to 1500 peaks/rotation

Band pass: 15 to 150, 15 to 500, 15 to 1500 peaks/rotation

Rectilinear direction (Z-axis) Low pass: 0.025, 0.08, 0.25, 0.8, 2.5, 8 mm (settable in 0.0001 mm units)

Roundness evaluation of profile error MZC (min. zone circle method), LSC (least square circle method), MIC (max. inscribed circle method), MCC (min. circumscribed circle method), N.C. (no compensation), Multi (multiple setting)

Measuringitems


Roundness, flatness, flatness (compound), parallelism, concentricity, coaxiality, cylindricity, squareness, run-out, thickness variation, diameter deviation, radius measurement, partial circle

Rectilinear direction

Straightness (Z), straightness (R), axis straightness, diameter deviation, cylindricity, squareness, parallelism, straightness with edge detection function (can be used for R65, R60, R55, R73)

Detector Polarity and automatic measurement direction distinction function

Master for detector calibration Magnification calibration, block gage, level difference master can be used

Calibration support Set by the guidance method by the wizard, calibration alarm function

Number of sampling points 14400 points/rotation

Analysis processing functions"＊" represents the standard equipment for CNC machines

Display items（2D, 3D, rectilinear expansion, parameters, measuring conditions), centering/tilting support function, notch/gear tip analysis (level, angle, cursor), combination of roundness evaluation methods, nominal value collation, cylinder 3D profile display (line

drawing, shading, contour line), real-time display, profile characteristic graph display (bearing area curve, amplitude distribution function, Power spectrum, fourier table), CNC automatic measurement*, automatic centering/tilting adjustment*

Special functions Easy operation"Easy mode" / for CNC "Expert mode", wide-range, security function by password, error self-diagnosis function

So

ftw

are

33

Centering / Tilting support function (patent pending)

Our original algorithm simplifies troublesome centering and tilting operations.

Easy operation

・Rearrangement of iconsCustomizing and/or hiding icons as needed enhances operability.

・Automatic recognition of measuring direction The system automatically recognizes the setting of a pickup measuring direction.

・Automatic magnification calibration function (patented)

Power spectrum / Fourier analysis

Analysis of peak components in a roundness profile enables noise and vibration evaluations. The power spectrum graphically shows the strength of each amplitude component (which have different frequencies in roundness profiles). A Fourier transform of extracted curves is provided for analysis of periodicity in waveforms.

Teaching/Playback function (patented)

Once a measuring procedure (including the alignment

operation) has been registered, everything from measuring

to printing can be performed automatically.

Gear analysis (patented)

The peaks of notches in a workpiece are connected in order to perform roundness analysis.

Bearing area curve / Amplitude distribution function

By analyzing surface

characteristics of a workpiece

using the bearing area curve and/

or amplitude distribution function,

you can assess its wear and life

expectancy.

PreparationMeasure the first and second

sections of a workpiece.

Cylindrical form (3D profile display)

Visual representation of cylindrical profile

Cylindrical profiles are analyzed visually and viewpoints can be moved to any location.

Contour line and shading displays clearly identify defects such as shrinkage of a plastic product or deformation of a pressed

part.

Optional programs

※Standard equipment for R44DX3/SD3, R47B, R43C, R41C, R31C

Tilting adjustmentAdjust to match the tilt of the rotational axis of the

workpiece and the rotational axis of the table.

Centering adjustmentAdjust to match the rotational center of the

workpiece and the table.

Cylindricity (Contour line display) Cylindricity (Shading display)

Power spectrum

Piston profile analysis

Design value collation can be performed for oval and barrel profiles. Value data for each angle or numeric expression can be used as design values. Evaluation of ring groove tilt and waviness is also available.

Bearing area curve display

Oval profileBarrel profile

So

ftw

are

35

36

1:1 Standard Sensitivity L=17 mm

Measuring application Model External view Specifications Remarks

General purpose 0194 000φ3.2 mmCarbide ball

Small holes 0194 001φ1 mmCarbide ball

General purpose 0194 002φ1.6 mmCarbide ball Standard stylus

Extra smallholes 0194 009

φ0.5 mm Carbide ball

Grooves 0194 003 R0.25 mm, 55° conicalSapphire

Deep grooves 0194 004 R0.25 mm, 55° conicalSapphire

Corners 0194 005 R0.25 mm, 55° conicalsapphire

Grooves

0194 006

R0.25 mm, 55° conicalSapphire

0194 007


Cutter markremoval 0194 010 R0.25 mm

Sapphire

Extra smallholes

EM49030-S361φ0.5 mmRuby ball

EM49030-S381φ0.3 mmRuby ball

ø5ø3

ø0.7

6.5（24）

17

5.5ø3

ø1 carbide ball

ø5ø3

6.5 （0.8）（15.5） 1.5（25.1）

17ø1.2

（6.5）

1/16” carbide ball (ø1.59)

ø5ø3

6.50.26

15.761.5 23.76

17Section A

2

15.5ø0.5 carbide ball

ø0.5

ø0.3 Section A

ø5

6.5 16.6（24.6）

R0.25 55˚ conical sapphire

ø3

ø3ø2

4.5

ø5

6.5 16.6（24.6）


ø3ø3ø2 10

ø5

6.5

23.1

R0.25 55˚ conical

ø3ø2

15.1（14）（1.1）

16.6

（3.4）

1.5

ø5

6.516.6（15.1）

R0.25 55˚ conical (both sides)sapphire

ø3ø3

ø2

6.5

1.5

0194102

ø5

6.516.6（15.1）


ø3ø3

ø2

10

1.5

0194102

ø5

6.516.6（15.1）


ø3ø3

ø2

20

1.5

0194102

ø5

6.5 16.6（24.6）

R0.25 sapphire

ø3ø3ø2

4.8

60°

測定子対象機種 ■E-DT-R32A （ R31C， R41C， R43C） ■E-DT-R74A （R47A/B， R55A/B， R60A， R65A）

要摘様仕図観外式型領要定測

1：1標準感度 L＝17mm

0194 000

0194 001

0194 002

0194 009

0194 003

0194 004

0194 005

0194 006

0194 007

0194 008

0194 010

EM49030-S361

EM49030-S381

φ3.2mm 超硬ボール

φ1mm 超硬ボール

φ1.6mm 超硬ボール標準測定子

φ0.5mm スチールボール

R0.25mm， 55°円錐サファイア，L型，L＝4.5mm

R0.25mm， 55°円錐サファイア，L型，L＝10mm

R0.25mm， 55°円錐サファイア，L型，L＝3.4mm/30°

R0.25mm， 55°円錐サファイア，T型，L＝6.5mm

R0.25mm， 55°円錐サファイア，T型，L＝10mm


R0.25mm サファイア，L型，L＝4.8mm／R15mm

φ0.5mm ルビーボール


汎用

小穴

汎用

極小穴

溝

深溝

コーナ

溝

溝

深溝

カッタマーク除去

極小穴

極小穴

ø5ø3

（ø2）

6.5（15.5）（1.6）（17.1）

1.5（25.1）

171/8"超硬ボール（ø3.18）

ø5ø3

ø0.76.5（24）

17

5.5ø3

ø1超硬ボール

ø5ø3

6.5 （0.8）（15.5） 1.5（25.1）

17ø1.2

（6.5）

1/16"超硬ボール（ø1.59）

ø5ø3

6.5（0.26）

（15.76） 1.5 （23.76）

17 A部

2（15.5）

ø0.5超硬ボール

ø0.5

ø0.3 A部

ø5

6.5 16.6（24.6）

R0.25 55°円錐サファイア

ø3ø3

ø24.5

ø5

6.5 16.6（24.6）


ø3ø3ø2 10

ø5

6.5

23.1

R0.25 55°円錐

ø3ø2

15.1（14）（1.1）

16.6（3.4）

1.5

ø5

6.516.6（15.1）

R0.25 55°円錐（両側）サファイア

ø3ø3

ø2

6.5

1.5

0194102

ø5

6.516.6（15.1）


ø3ø3

ø2

10

1.5

0194102

ø5

6.516.6（15.1）


ø3ø3

ø2

20

1.5

0194102

ø5

6.5 16.6（24.6）

R0.25 サファイア

ø3ø3ø2

4.8

60°

ø56.5

（17）

1.5

ø0.5 ruby ball

15.523.5

（3） ø3

ø56.5

（17）

1.5

ø0.3 ruby ball15.5

23.5

（1.5） ø3

30°

測定子対象機種 ■E-DT-R32A （ R31C， R41C， R43C） ■E-DT-R74A （R47A/B， R55A/B， R60A， R65A）

要摘様仕図観外式型領要定測

1：1標準感度 L＝17mm

0194 000

0194 001

0194 002

0194 009

0194 003

0194 004

0194 005

0194 006

0194 007

0194 008

0194 010

EM49030-S361

EM49030-S381

φ3.2mm 超硬ボール

φ1mm 超硬ボール

φ1.6mm 超硬ボール標準測定子

φ0.5mm スチールボール

R0.25mm， 55°円錐サファイア，L型，L＝4.5mm

R0.25mm， 55°円錐サファイア，L型，L＝10mm

R0.25mm， 55°円錐サファイア，L型，L＝3.4mm/30°

R0.25mm， 55°円錐サファイア，T型，L＝6.5mm



R0.25mm サファイア，L型，L＝4.8mm／R15mm



汎用

小穴

汎用

極小穴

溝

深溝

コーナ

溝

溝

深溝

カッタマーク除去

極小穴

極小穴

ø5ø3

（ø2）

6.5（15.5）（1.6）（17.1）

1.5（25.1）

171/8"超硬ボール（ø3.18）

ø5ø3

ø0.76.5（24）

17

5.5ø3

ø1超硬ボール

ø5ø3

6.5 （0.8）（15.5） 1.5（25.1）

17ø1.2

（6.5）

1/16"超硬ボール（ø1.59）

ø5ø3

6.5（0.26）

（15.76） 1.5 （23.76）

17 A部

2（15.5）

ø0.5超硬ボール

ø0.5

ø0.3 A部

ø5

6.5 16.6（24.6）


ø3ø3

ø24.5

ø5

6.5 16.6（24.6）


ø3ø3ø2 10

ø5

6.5

23.1

R0.25 55°円錐

ø3ø2

15.1（14）（1.1）

16.6（3.4）

1.5

ø5

6.516.6（15.1）


ø3ø3

ø2

6.5

1.5

0194102

ø5

6.516.6（15.1）


ø3ø3

ø2

10

1.5

0194102

ø5

6.516.6（15.1）


ø3ø3

ø2

20

1.5

0194102

ø5

6.5 16.6（24.6）

R0.25 サファイア

ø3ø3ø2

4.8

60°

ø56.5

（17）

1.5

ø0.5 ruby ball

15.523.5

（3） ø3

ø56.5

（17）

1.5

ø0.3 ruby ball15.5

23.5

（1.5） ø3

30°

ø5ø3

（ø2）

6.5（15.5）（1.6）（17.1）

1.5（25.1）

171/8” carbide ball (ø3.18)

Standard Inventory Parts

StyliApplicable models ■ E-DT-R32A（R30, R40, R31, R41, R43）　■ E-DT-R74A（R47, R55, R60A, R65A）


Table Rotating Type RONDCOM Options

Op

tio

ns

37

2:1 Sensitivity L=54 mm


General purpose 0194 200φ3.2 mmCarbide ball

Small holes 0194 201 φ1 mmCarbide ball

General purpose 0194 202 φ1.6 mmCarbide ball

Extra smallholes 0194 209


Grooves 0194 203 R0.25 mm, 55° conicalSapphire


Corners 0194 205 R0.25 mm, 55° conicalSapphire

Grooves

0194 206


0194 207


Cutter markremoval 0194 210 R0.25 mm

Sapphire

3:1 Sensitivity L=92 mm


General purpose 0194 400 φ3.2 mmCarbide ball

Small holes EM49201-S375 φ1 mmRuby ball

General purpose EM49201-S374 φ1.6 mmRuby ball

Deep grooves EM49201-S315 R0.25 mm, 55° conicalSapphire

Grooves EM49201-S361 R0.25 mm, 55° conicalSapphire

Extra smallholes EM49201-S376

φ0.5 mmRuby ball

ø5ø3

（ø2） 6.5

（53）（1.6）（54.6）

1.5 （62.5）

54.51/8” carbide ball (ø3.18)

ø5ø3 ø0.7

6.5 （0.5） 54.561.5

ø1 carbide ball

ø5ø3 （ø1.2）

6.5 （0.8）（53） 1.5 （61.8）

54.51/16” carbide ball (ø1.59)

ø5ø3 ø0.7

6.5 53.261.5 61.8

54.5ø0.5 carbide ball

53

ø0.3

2

ø5

6.5

62.3

（52.8）


ø3ø3

ø2

4.5

54.31.5 （1.5）

ø5

6.5

62.3

（52.8）


ø3ø3 ø2 10

54.31.5 （1.5）

ø5

6.5

60.8R0.25 55˚ conicalsapphire

ø3ø2

6351.5 （1.5）

54.3

（3.4）

1.5

0194303

30°

ø5

6.554.3

（52.8）R0.25 55˚ conical (both sides)sapphire

ø3ø2

6.5

1.5

0194302

ø5

6.554.3（52.8）


ø3

ø2

10

1.5

0194302

ø5

6.554.3（52.8）


ø3

ø2

20

1.5

0194302

ø5

6.5 54.362.3

R1.5/R0.25 sapphire

ø3ø3ø2

4.8

60°

1.552.8

ø5ø3

6.50.590.5

ø1 ruby ball

1.5 9199

ø0.8

SUS303

ø5ø3 ø1.2

6.50.890.5

1.599.3

92ø1.6 ruby ball

91.3

ø5

100


ø2 10

921.5

0194603

1.5

ø5

6.510092


ø36.5

1.5

ø5

6.51.5

ø0.5 ruby ball

90.5

3

ø3

92

90.7598.75

0.25


ø5ø3

（ø2） 6.5 1.692（100.1）

ø3.2 carbide ball

38



1:1 Standard Sensitivity L=59.5 mm


General purpose EM46000-S300 φ3.2 mmCarbide ball

Small holes EM46000-S301 φ1 mmCarbide ball

General purpose EM46000-S302 φ1.6 mm Carbide ball Standard stylus



Corners EM46000-S305 R0.25 mm, 55° conicalSapphire

Grooves

EM46000-S306


EM46000-S307




Cutter markremoval EM46000-S310 R0.25 mm

Sapphire, L type, L= 4.8 mm/R15 mm

StyliApplicable models ■ E-DT-R95A（R31, R41, R43）　■ E-DT-R83A（R47, R55, R60A, R65A）　■ E-DT-R120A（R44, R54, R55, R60A, R65A）


ø2

10

R0.25 55˚ conical (both sides)Sapphire

ø5ø3

5.5 158.2

6.5

64.7

ø2

20


ø5ø3

5.5 158.2

6.5

64.7

2

ø0.5 carbide ball

ø5

5.5 0.2559.5

6.5

65.3

ø3 ø0.5

ø0.3

ø5ø3

5.5 1.558.2

6.5

65.2

R0.25Sapphire

ø2

4.8

60R15

ø5ø3 ø2

5.5 1.659.5

ø3.2 carbide ball6.5

66.6

ø5ø3 ø0.7

5.5 0.559.5


65.5

ø5ø3 ø1.2

5.5 0.859.5


65.8

ø5ø3

5.5 1.558.2

6.5

65.2

ø2

4.5R0.25 55˚ conical sapphire

ø5ø3

5.5 1.558.2

6.5

65.2

ø2

10


ø5ø3

5.5

1.5

58.2

6.5

63.7 ø2


3.4

60


ø2

6.5ø5ø3

5.5 158.2

6.5

64.7

Op

tio

ns

39

1.5:1 Sensitivity L= 97 mm


General purpose EM46100-S300φ3.2 mmCarbide ball

Small holes EM46100-S301φ1 mmCarbide ball

General purpose EM46100-S302φ1.6 mmCarbide ball



Corners EM46100-S305 R0.25 mm, 55° conicalSapphire

Grooves

EM46100-S306


EM46100-S307



φ0.5 mmCarbide ball

Cutter markremoval EM46100-S310 R0.25 mm

Sapphire, L type, L= 4.8 mm/R15 mm

Stylus attachment EM-59103-S001

Used when 2 : 1 stylus for detectors[E-DT-R32A/E-DT-R74A] is mounted on detectors [E-DT-R83A/E-DT-R95A/E-DT-R120A]

ø5ø3 ø0.7

5.5 0.597


103

ø5ø3 ø2

5.5 1.697


104.1

ø5ø3 ø1.2

5.5 0.896.2


103.2

ø5ø3

5.5 1.596.2

6.5

103.2

ø2

4.5R0.25 55˚ conical sapphire

ø5ø3

5.5 1.596.2

6.5

103.2

ø2

10


ø5ø3

5.5

1.5

96.2

6.5

101.7 ø2

R0.25 55˚ conical sapphire3.4

60


ø2

6.5ø5ø3

5.5 196.2

6.5

102.7

ø2

10


ø5ø3

5.5 196.2

6.5

102.7

ø2

20


ø5ø3

5.5 196.2

6.5

102.7

2

ø0.5 carbide ball

ø5

5.5 0.2597

6.5

102.8

ø3 ø0.5

ø0.3

ø5ø3

5.5 1.596.2

6.5

103.2

R0.25sapphire

ø2

4.8

60R15

ø5

10.5

6.5

Stylus attachment


40



Name Model External view Specifications Remarks

Generalpurposedetector

E-DT-R32A

Measuring range: ±400 μmMeasuring force: 70 mNFront adjustment mechanismID/OD switch functionStylus: φ1.6 carbide ball (0194 002) option

Applicable models: R30/31, R40/41, R43

E-DT-R74A

Measuring range: ±800 μmMeasuring force: 70 mNFront adjustment mechanismID/OD switch functionStylus: φ1.6 carbide ball (0194 002) option

Applicable models: R47, R55, R60A, R65A

Detector/styli set

E-DT-R37A

General purpose stylus: 0194 000φ3.2 carbide ball

Small hole stylus: 0194 001 φ1 carbide ball

Deep groove stylus: 0194 004 Sapphire

Groove stylus: 0194 007 Sapphire

Set of detector [E-DT-R32A] and styli listed to the left

E-DT-R76A Set of detector [E-DT-R74A] and styli listed to the left

Low measuringforce detector

E-DT-R10A

Measuring range: ±400 μmMeasuring force: 5 mN

Applicable models: R30/31, R40/41, R43Stylus: φ1.6 ruby ball (010 2505) provided (cable length: 1.5 m)

E-DT-R87A

Applicable models: R47, R55, R60A, R65AStylus: φ1.6 ruby ball (010 2505) providedCombination with detector holder: [E-DH-R639A] and C46 conversion adapter(cable length: 0.5 m)

E-DT-R173A

Applicable models: R47, R55, R65ACombination with detector holder: [E-DH-R636A]Applicable models: R55, R65A (each comes with CNC holder)Combination with detector holder:[E-DH-R636A] and C6L6 conversion adapterApplicable model: R60ACombination with detector holder: [E-DH-R603A]Applicable model: R60A (with CNC holder)Combination with detector holder: [E-DH-R603A] and C6L6 conversion adapter

E-DT-R168B

Applicable models: R55, R65A (with CNC holder)Combination with detector holder: [E-DH-R636A]Applicable model: R60A (with CNC holder)Combination with detector holder: [E-DH-R603A]Applicable models: R44, R54Combination with offset detector holder: [E-DH-R749A]

General purposestylus for low measuring force detector

010 2505 Stylus: φ1.6 mm ruby ballApplicable detectors: E-DT-R10A, E-DT-R87A,E-DT-R172A, E-DT-R173A, E-DT-R168A

Small holestylus for low measuring force detector

010 2516 Stylus: φ1 mm ruby ballApplicable detectors: E-DT-R10A, E-DT-R87A, E-DT-R172A, E-DT-R173A, E-DT-R168A

26.5

39

Tip ø1.6 ball

ø21.764.8

Detector

各種検出器対象機種 ■R31C ■R41C ■R43C ■R44DX/SD ■R47A/B

■R54DX/SD ■R55A/B ■R60A ■R65A

名称

汎用検出器

型式

E-DT-R32A

E-DT-R74A

様仕図観外

測定範囲：±400μm測定力：70mNフロント調整機構付き内外径切替機能付き


摘要

適用機種：R31C，R41C，R43C測定子：φ1.6超硬ボール（0194 002）オプション

適用機種：R47A/B，R55A/B，R60A，R65A測定子：φ1.6超硬ボール（0194 002）オプション

ø3

24.5

3.5

17

検出器上面

6.5

12.2

28.858.8

L

1223

検出器幅14

R32A：L＝25mm R74A：L＝45mm

測定子

検出器・測定子セット

E-DT-R37A

E-DT-R76A

汎用測定子 0194 000φ3.2超硬ボール

小穴測定子 0194 001φ1超硬ボール

深溝測定子 0194 004サファイア，L型，L＝10mm

溝測定子 0194 007サファイア，T型，L＝10mm

検出器 E-DT-R32A と左記測定子のセット


17

L

T

低測定力検出器

E-DT-R10A

測定範囲：±400μm測定力：5mN

適用機種：R31C, R41C, R43C測定子：φ1.6ルビーボール（010 2505）付属

26.5

39

先端 ø1.6ボール

ø21.764.8

検出器

64.8 62.426.5153.7 32

HolderLow measuringforce detector

ø27.5

ø21.7

64.8 62.426.5153.7 32

Holder


ø21.7

E-DT-R87A適用機種：R47A/B, R55A/B, R60A, R65A測定子：φ1.6ルビーボール（010 2505）付属検出器ホルダ E-DH-R639Aと変換アダプタC46を

組合わせ

E-DT-R173A

適用機種：R47A/B, R55A/B, R65A検出器ホルダ E-DH-R636Aと組合わせ適用機種：検出器ホルダ

R55A/B, R65A（何れもCNCホルダ付き）E-DH-R636Aと変換アダプタC6L6を組合わせ

適用機種：R60A検出器ホルダ E-DH-R603Aと組合わせ

検出器ホルダ適用機種：R60A（CNCホルダ付き）

E-DH-R603Aと変換アダプタC6L6を組合わせ

E-DT-R168B

適用機種：R55A/B,R65A （CNCホルダ付き）検出器ホルダE-DH-R636Aと組合わせ適用機種：R60A （CNCホルダ付き）検出器ホルダE-DH-R603Aと組合わせ適用機種：R44SD/DX, R54SD/DXオフセット検出器ホルダ E-DH-R749Aと組合わせ

汎用測定子低測定力検出器用 010 2505

適用検出器：E-DT-R10A, E-DT-R87A, E-DT-R172A,E-DT-R173A, E-DT-R168A

測定子：φ1.6mmルビーボール7.5 4.8

2240

ø2.7

ø1.6

小穴測定子低測定力検出器用 010 2516


測定子：φ1mmルビーボールø0.8

2239.7

15

ø1.0

各種検出器対象機種 ■R31C ■R41C ■R43C ■R44DX/SD ■R47A/B

■R54DX/SD ■R55A/B ■R60A ■R65A

名称

汎用検出器

型式

E-DT-R32A

E-DT-R74A

様仕図観外



摘要

適用機種：R31C，R41C，R43C測定子：φ1.6超硬ボール（0194 002）オプション

適用機種：R47A/B，R55A/B，R60A，R65A測定子：φ1.6超硬ボール（0194 002）オプション

ø3

24.5

3.5

17

検出器上面

6.5

12.2

28.858.8

L

1223

検出器幅14

R32A：L＝25mm R74A：L＝45mm

測定子


E-DT-R37A

E-DT-R76A

汎用測定子 0194 000φ3.2超硬ボール


深溝測定子 0194 004サファイア，L型，L＝10mm

溝測定子 0194 007サファイア，T型，L＝10mm



17

L

T

低測定力検出器

E-DT-R10A

測定範囲：±400μm測定力：5mN

適用機種：R31C, R41C, R43C測定子：φ1.6ルビーボール（010 2505）付属

26.5

39

先端 ø1.6ボール

ø21.764.8

検出器

64.8 62.426.5153.7 32

HolderLow measuringforce detector

ø27.5

ø21.7

64.8 62.426.5153.7 32

Holder


ø21.7

E-DT-R87A適用機種：R47A/B, R55A/B, R60A, R65A測定子：φ1.6ルビーボール（010 2505）付属検出器ホルダ E-DH-R639Aと変換アダプタC46を

組合わせ

E-DT-R173A

適用機種：R47A/B, R55A/B, R65A検出器ホルダ E-DH-R636Aと組合わせ適用機種：検出器ホルダ

R55A/B, R65A（何れもCNCホルダ付き）E-DH-R636Aと変換アダプタC6L6を組合わせ

適用機種：R60A検出器ホルダ E-DH-R603Aと組合わせ

検出器ホルダ適用機種：R60A（CNCホルダ付き）

E-DH-R603Aと変換アダプタC6L6を組合わせ

E-DT-R168B

適用機種：R55A/B,R65A （CNCホルダ付き）検出器ホルダE-DH-R636Aと組合わせ適用機種：R60A （CNCホルダ付き）検出器ホルダE-DH-R603Aと組合わせ適用機種：R44SD/DX, R54SD/DXオフセット検出器ホルダ E-DH-R749Aと組合わせ

汎用測定子低測定力検出器用 010 2505


測定子：φ1.6mmルビーボール7.5 4.8

2240

ø2.7

ø1.6

小穴測定子低測定力検出器用 010 2516


測定子：φ1mmルビーボールø0.8

2239.7

15

ø1.0

DetectorsApplicable models ■ R30/31　■ R40/41　■ R43　■ R44　■ R47　■ R54　■ R55　■ R60A　■ R65A


ø3

24.5

3.5

17

Top of detector

6.5

12.2

28.858.8

L

1223

Detector width 14

R32A：L＝25 mmR74A：L＝45 mm

Stylus

17

10

10

7.5 4.8

22

40ø2.7

ø1.6

ø0.8

22

39.7

15

ø1.0

Op

tio

ns

41



E-DT-R83A

Measuring range: ±1000 μmMeasuring force: 30 mN to 100 mNFront adjustment mechanismID/OD switch function

Applicable models: R47, R55, R60A, R65AWith detector safety device

E-DT-R95A


Applicable models: R31, R41, R43

E-DT-R120A


Applicable models: R55, R60A, 65AFor the E-DH-669A full automatic detector holderApplicable models: R44 and R54For offset type detector holder: E-DH-R749A/R774A/R770A

E-DT-R106AGeneral purpose stylus [EM46000-S300]φ3.2 carbide ball

Small hole stylus [EM46000-S301]φ1 carbide ball

Deep groove stylus [EM46000-S304]Sapphire

Groove stylus [EM46000-S307]Sapphire

Set of detector [E-DT-R83A] and styli listed to the left

Detectorstylus set E-DT-R141A Set of detector [E-DT-R120A] and styli listed

to the left

E-DT-R107A Set of detector [E-DT-R95A] and styli listed to the left

Deep holedetector

E-DT-R44A

Throat height H: 199.5 mmThroat depth D: 143.3 mmMagnification: 2000x or less

Applicable model: R60ACombination with C46 conversion adapterCombination with C4L6 conversion adapter(when CNC holder is used)

E-DT-R105A

Applicable models: R31, R41, R43, R47, R55, R65ACombination with C46 conversion adapterCombination with C4L6 conversion adapter(when CNC holder is used)

E-DT-R163AThroat height H: 199.5 mmThroat depth D: 143.3 mmMagnification: 2000x or less

Applicable models: R44, R54 (80 mm offset specification)Combination with horizontal feed coupling [E-DT-R772A]

Thindetector

E-DT-R140A

Detection range: ±200 μmMeasuring force: 15 mNFront travel: 500 μm to 700 μm

Applicable models: R47, R55, R65ADetector holder: E-DH-R653A/R708A/R725AApplicable models: R55, R65A (when CNC holder is used)Combination with detector holder [E-DH-R653A/R708A/R725A] and C6L6 conversion adapterApplicable model: R60A (when CNC holder is used)Combination with detector holder [E-DH-R608A/R707A/R724A] and C6L6conversion adapter

E-DT-R130A

Applicable models: R55, R65A(when CNC holder is used)Combination with detector holder [E-DH-R653A/R708A/R725A]Applicable model: R60A (when CNC holder is used)Combination with detector holder [E-DH-R608A/R707A/R724A ]

53ø24.6 738135

189

53ø24.6 738135

189

ø5ø3 ø2

5.5 1.659.5


66.6

ø5ø3 ø0.7

5.5 0.559.5


65.5

ø5ø3

5.5 1.558.2

6.5

65.2

ø2

10


ø2

10


ø5ø3

5.5 158.2

6.5

64.7

199.

5

Detector securing knob

7.5 143.3

226.

5

ID/OD change knobDetector fine movement knob

Stylus arm

Detector cord length: 1.5m

標準在庫品

要摘様仕図観外式型称名

汎用検出器 E-DT-R83A

測定範囲：±1000μm測定力：30～100mNフロント調整機構付き内外径切替機能付き

適用機種：R47A/B，R55A/B，R60A，R65A検出器安全装置付き

53ø24.6 738135

189



適用機種：R31C，R41C，R43C



適用機種：R55A/B，R60A，65A全自動検出器ホルダ E-DH-669A用

適用機種：R44DX/SD, R54DX/SDオフセット型検出器ホルダー E-DH-R749A/R774A/R770A用

53ø24.6 738135

189

検出器測定子セット

E-DT-R106A汎用測定子 EM46000-S300

φ3.2超硬ボール

小穴測定子 EM46000-S301φ1超硬ボール

深溝測定子 EM46000-S304サファイア，L型，L＝10mm

溝測定子 EM46000-S307サファイア，T型，L＝10mm

検出器 E-DT-R83A と左記測定子のセットø5

ø3 （ø2） 5.5 （1.6） 59.5

ø3.2超硬ボール 6.5

66.6

ø5ø3 ø0.7

5.5 （0.5） 59.5


65.5

ø5ø3

5.5 （1.5） 58.2

6.5

65.2

ø2

10


ø2

10


ø5ø3

5.5 （1） 58.2

6.5

64.7

E-DT-R141A 検出器 E-DT-R120A と左記測定子のセット


深穴用検出器

E-DT-R44A

フトコロ高さＨ：199.5mmフトコロ深さＤ：143.3mm測定倍率：2000倍以下

適用機種：R60A変換アダプタC46の組合せ変換アダプタC4L6の組合せ（CNCホルダ時）

199.

5

検出器固定ツマミ

7.5 143.3

226.

5

内・外測定切換ツマミ検出器微動ツマミ

スタイラスアーム

検出部コード長さ1.5m

E-DT-R105A

適用機種：R31C, R41C, R43C,R47A/B, R55A/B, R65A

変換アダプタC46の組合せ変換アダプタC4L6の組合せ（CNCホルダ時）

226.

5

80

143.3

199.

5

Stylus Arm b

O.DI.D

ø6E-DT-R163Aフトコロ高さＨ：199.5mmフトコロ深さＤ：143.3mm測定倍率：2000倍以下

適用機種：R44DX/SD, R54DX/SD（80mmオフセット仕様）横送り継手E-DT-R772Aと組合せ

E-DT-R140A

検出範囲：±200μm測定力：15mNフロントトラベル：

500～700μm

適用機種：R47A/B, R55A/B, R65A検出器ホルダ E-DH-R653A/R708A/R725A

適用機種：R55A/B, R65A （何れもCNCホルダ時）検出器ホルダ E-DH-R653A/R708A/R725Aと

変換アダプタC6L6の組合せ

適用機種：R60A（CNCホルダ付時）検出器ホルダ E-DH-R608A/R707A/R724Aと


86

Tip EM47038-S002

4.720

19

薄型検出器

E-DT-R130A


組合せ適用機種：R60A（CNCホルダ時）検出器ホルダ E-DH-R608A/R707A/R724Aと

組合せ

8620

Cable length：0.5 m

Cable length：1 m

標準在庫品





53ø24.6 738135

189








53ø24.6 738135

189








ø3 （ø2） 5.5 （1.6） 59.5


66.6

ø5ø3 ø0.7

5.5 （0.5） 59.5


65.5

ø5ø3

5.5 （1.5） 58.2

6.5

65.2

ø2

10


ø2

10


ø5ø3

5.5 （1） 58.2

6.5

64.7



深穴用検出器

E-DT-R44A



199.

5


7.5 143.3

226.

5




E-DT-R105A



226.

5

80

143.3

199.

5

Stylus Arm b

O.DI.D



E-DT-R140A


500～700μm






86

Tip EM47038-S002

4.720

19

薄型検出器

E-DT-R130A



組合せ

8620


Cable length：1 m標準在庫品





53ø24.6 738135

189








53ø24.6 738135

189








ø3 （ø2） 5.5 （1.6） 59.5


66.6

ø5ø3 ø0.7

5.5 （0.5） 59.5


65.5

ø5ø3

5.5 （1.5） 58.2

6.5

65.2

ø2

10


ø2

10


ø5ø3

5.5 （1） 58.2

6.5

64.7



深穴用検出器

E-DT-R44A



199.

5


7.5 143.3

226.

5




E-DT-R105A



226.

5

80

143.3

199.

5

Stylus Arm b

O.DI.D



E-DT-R140A


500～700μm






86

Tip EM47038-S002

4.720

19

薄型検出器

E-DT-R130A



組合せ

8620


Cable length：1 m標準在庫品





53ø24.6 738135

189








53ø24.6 738135

189








ø3 （ø2） 5.5 （1.6） 59.5


66.6

ø5ø3 ø0.7

5.5 （0.5） 59.5


65.5

ø5ø3

5.5 （1.5） 58.2

6.5

65.2

ø2

10


ø2

10


ø5ø3

5.5 （1） 58.2

6.5

64.7



深穴用検出器

E-DT-R44A



199.

5


7.5 143.3

226.

5




E-DT-R105A



226.

5

80

143.3

199.

5

Stylus Arm b

O.DI.D



E-DT-R140A


500～700μm






86

Tip EM47038-S002

4.720

19

薄型検出器

E-DT-R130A



組合せ

8620


Cable length：1 m


42




Detector holder

E-DH-R639A （E-DH-R384A） Throat height H: 90.5 mm

Throat depth D: 68 mm

Applicable models: R47, R55, R65ACombination detector: E-DT-R74A, E-DT-R87AInformation in ( ) is for R60A.

E-DH-R617AApplicable models: R31, R41, R43 (standard accessory)Combination detector: E-DT-R32A, E-DT-R10A

E-DH-R149A ID measuring range: φ31 mm Magnification: 2000x or lessStylus sensitivity: 1:1

Applicable models: R31, R41, R43, R47, R55, R60A, R65ACombination detector: E-DT-R32A, E-DT-R74A

Detector holder coupling

E-DH-R80A

Throat height H: 128 mmThroat depth D: 68 mm to 84 mmMagnification: 20000x or lessStylus sensitivity: 2:1


E-DH-R327A

Throat height H: 128 mmThroat depth D: 115 mmMagnification: 10000x or lessStylus sensitivity: 2:1

E-DH-R354A

Throat height H: 165 mmThroat depth D: 68 mm to 84 mmMagnification: 5000x or lessStylus sensitivity: 3:1

E-DH-R348A

Throat height H: 165 mmThroat depth D: 115 mmMagnification: 2000x or lessStylus sensitivity: 3:1

Detector holder

E-DH-R329A

Throat height H: 300 mm (ID φ31 mm or more)Throat depth D: 60 mmID measuring range: φ16 mm to φ300 mmMagnification: 1000x or lessStylus sensitivity: 1:1 to 3:1


E-DH-R317A

Throat height H: 170 mmThroat depth D: 115 mmID measuring range: φ20 mm to φ300 mmMagnification: 2000x or lessStylus sensitivity: 1:1 to 3:1

Applicable model: R60ACombination detector: E-DT-R74A

E-DH-R636A （E-DH-R603A） Throat height H: 154 mm


Applicable models: R47, R55, R65ACombination detectors: E-DT-R83A, E-DT-R173A, E-DT-R120A, E-DT-R168AInformation in ( ) is for R60A.

E-DH-R618A Applicable models: R31, R41, R43Combination detector: E-DT-R95A

Detector holder coupling E-DH-R613A

Throat height H: 192 mmThroat depth D: 68 mmMagnification: 5000x or lessStylus sensitivity: 1.5:1

Applicable models: R47, R55, R60A, R65ACombination detectors: E-DT-R83A, E-DT-R173A, E-DT-R120A, E-DT-R168AApplicable models: R31, R41, R43Combination detector: E-DT-R95A

Detector holder E-DH-R678A


Applicable models: R47, R55, R60A, R65ACombination detectors: E-DT-R83A, E-DT-R173A, E-DT-R120A, E-DT-R168AApplicable models: R31, R41, R43Combination detector: E-DT-R95A

24

90.5

8468

2212

48

ø10 h7

Detector

（70.5）

（13

2.1）

ø30 or more

（91

.1）

（10

2）15

024

1.1

Tip height directionReference position

Standard detector holder

6884

128.

3

115

128.

3

6884

165

115

165.

6

115

170

E-DK-R32A

246824

153.

7

84

2212

Detector HolderE-DH-R636A

68

Detector holdercoupling

E-DH-R613A191.

7

検出器ホルダ対象機種 ■R31C ■R41C ■R43C ■R47A/B ■R55A/B ■R60A ■R65A

要摘様仕図観外式型称名E-DH-R639A （E-DH-R384A）

E-DH-R617A

E-DH-R618A

E-DH-R329A

E-DH-R317A

E-DH-R613A

E-DH-R678A

E-DH-R149A

E-DH-R636A （E-DH-R603A）

適用機種：R47A/B, R55A/B， R65A 組合せ検出器：E-DT-R74A， E-DT-R87A （）はR60A用適用機種：R31C， R41C， R43C 組合せ検出器：E-DT-R32A， E-DT-R10A

適用機種：R31C， R41C， R43C 組合せ検出器：E-DT-R95A

フトコロ高さ H：90.5mm フトコロ深さ D：68mm

適用機種： R31C， R41C， R43C, R47A/B, R55A/B， R60A, R65A 組合せ検出器：E-DT-R32A， E-DT-R74A

内径測定範囲 φ31mm～測定倍率 2000倍以下測定子感度 1：1


フトコロ高さ H：128mm フトコロ深さ D：68～84mm 測定倍率 20000倍以下測定子感度 2：1


フトコロ高さ H：128mm フトコロ深さ D：115mm 測定倍率 10000倍以下測定子感度 2：1


フトコロ高さ H：165mm フトコロ深さ D：68～84mm 測定倍率 5000倍以下測定子感度 3：1


フトコロ高さ H：165mm フトコロ深さ D：115mm 測定倍率 2000倍以下測定子感度 3：1


フトコロ高さ H：300mm （内径φ31mm以上）フトコロ深さ D：60mm 内径測定範囲 φ16～φ300mm 測定倍率 1000倍以下測定子感度 1：1～3：1

適用機種：R60A 組合せ検出器：E-DT-R74A

フトコロ高さ H：170mm フトコロ深さ D：115mm 内径測定範囲 φ20～φ300mm 測定倍率 2000倍以下測定子感度 1：1～3：1

適用機種：R47A/B, R55A/B， R65A 組合せ検出器：E-DT-R83A， E-DT-R173A， E-DT-R120A， E-DT-R168A （）はR60A用

フトコロ高さ H：154mm フトコロ深さ D：68mm

適用機種：R47A/B, R55A/B， R60A， R65A 組合せ検出器：E-DT-R83A， E-DT-R173A， E-DT-R120A， E-DT-R168A


フトコロ高さ H：192mm フトコロ深さ D：68mm 測定倍率 5000倍以下測定子感度 1.5 ：1

フトコロ高さ H：192mm フトコロ深さ D：120mm 測定倍率 5000倍以下測定子感度 1.5：1

適用機種：R47A/B, R55A/B， R60A， R65A 組合せ検出器：E-DT-R83A， E-DT-R173A， E-DT-R120A， E-DT-R168A


検出器ホルダ

検出器ホルダ

検出器ホルダ

検出器ホルダ

検出器ホルダ継手

検出器ホルダ





E-DH-R80A

E-DH-R327A

E-DH-R354A

E-DH-R348A

検出器ホルダ

標準在庫品

24

90.5

8468

2212

48

ø10 h7

検出器

（70.5）

（13

2.1）

ø30以上

（91

.1）

（10

2）

150

241.

1

先端子高さ方向基準位置

標準検出器ホルダ

6884

128.

3

115

128.

3

6884

165

115

165.

6

60

300

115

170

E-DK-R32A

246824

153.

7

84

2212

検出器ホルダ（E-DH-R636A）

68

検出器ホルダ継手 E-DH-R613A19

1.7

120

191.

722

89.6

24

60

300

Detector HoldersApplicable models ■ R30/31　■ R40/41　■ R43　■ R44　■ R47　■ R54　■ R55　■ R60A　■ R65A


Op

tio

ns

43


Full automaticdetector holder

E-DH-R665A（E-DH-R669A)

Throat height H: 151 mmThroat depth D: 55 mm

Applicable models: R60A, R65AInformation in ( ) is for R55.Combination detector: E-DT-R120A

E-DH-R677A


Applicable models: R60A, R65ACombination detector: E-DT-R120ACombination link cable: EE74017 (70 mm)

E-DH-R720AThroat height H: 151 mmThroat depth D: 96 mmMagnification: 10000x or less

Applicable models: R60A, R65ACombination detector: E-DT-R120ACombination link cable: EE74023 (30 mm)

1.5:1 holderfor full automaticdetector holder

E-DH-R690A


Applicable models: R55, R60A, R65ACombination detector: E-DT-R120ACombination detector holder: E-DH-R669A/R665ACombination link cable: EE74023 (30 mm)Combination holder cable: EE74022 (30 mm)


Offset typedetector holder E-DH-R749A Throat height H: 153 mm


Applicable models: R44, R54Combination detector: E-DT-R120A

Offset typedetector holder1.5:1 type

E-DH-R774A

Throat height H: 191 mmThroat depth D: 65 mmCutoff filter: 15, 50 peaks/rotationStylus sensitivity: 1.5:1

Offset typeCNC detector holder E-DH-R770B Throat height H: 153 mm

Throat depth D: 65 mmApplicable model: R54Combination detector: E-DT-R120A

14414

36

70162

156

15

1942

.515

1.2

22314

36

135235

6

1942

.515

1.2

18414

36

96196

156

15

1942

.515

1.2

14414

3618

9.2

71156

8046

1515

1942

.5

CNC検出器ホルダ対象機種 ■R55A/B ■R60A ■R65A


オフセット型検出器ホルダ対象機種 ■R44DX/SD ■R54DX/SD


全自動検出器ホルダ


フトコロ高さＨ：151mmフトコロ深さＤ：55mm

適用機種：R60A，R65A（）内はR55A/B用

組合せ検出器：E-DT-R120A

14414

36

70162

15 615

1942

.515

1.2

全自動検出器ホルダー用1.5：1ホルダ

E-DH-R690A

フトコロ高さＨ：189mmフトコロ深さＤ：55mm測定倍率：5000倍以下測定子感度 1.5：1

適用機種：R55A/B，R60A，R65A組合せ検出器：E-DT-R120A組合せ検出器ホルダ：E-DH-R669A/R665A組合せ中継ケーブル：EE74023（30mm）組合せホルダケーブル：EE74022（30mm）

14414

3618

9.2

71156

8046

1515

1942

.5

全自動検出器ホルダ E-DH-R677A


適用機種：R60A, R65A組合せ検出器：E-DT-R120A組合せ中継ケーブル：EE74017（70mm）

22314

36

135235

6

1942

.515

1.2


フトコロ高さＨ：151mmフトコロ深さＤ：96mm測定倍率：10000倍以下


18414

36

96196

15 615

1942

.515

1.2

オフセット型検出器ホルダ E-DH-R749A


適用機種：R44DX/SD, R54DX/SD組合せ検出器：E-DT-R120A

Detector Detector Holder

Horizontalorientation

Vertical orientation

45° 45°80

15

153.

7

60

180.780

140

651515

オフセット型検出器ホルダ1.5：1仕様

E-DH-R774A

フトコロ高さＨ：191mmフトコロ深さＤ：65mmカットオフフィルタ：15,50山/回転測定子感度 1.5：1





45° 45°80

15

191.

7

60

218.780

140651515

Tip （1.5：1）

オフセット型CNC検出器ホルダ E-DH-R770B


適用機種：R54DX/SD組合せ検出器：E-DT-R120A

153.

7

232

45°

1580



Detector

Detector Holder

45° 60

140651515

※オフセット型検出器ホルダは、R55A/B、R60A、R65Aにも取付可能です。ただし、オフセット型検出器ホルダ取付用横送り装置が別途必要です。










14414

36

70162

15 615

1942

.515

1.2


E-DH-R690A



14414

3618

9.2

71156

8046

1515

1942

.5




22314

36

135235

6

1942

.515

1.2




18414

36

96196

15 615

1942

.515

1.2







45° 45°80

15

153.

7

60

180.780

140

651515


E-DH-R774A






45° 45°80

15

191.

7

60

218.780

140651515

Tip （1.5：1）




153.

7

232

45°

1580



Detector

Detector Holder

45° 60

140651515











14414

36

70162

15 615

1942

.515

1.2


E-DH-R690A



14414

3618

9.2

71156

8046

1515

1942

.5




22314

36

135235

6

1942

.515

1.2




18414

36

96196

15 615

1942

.515

1.2







45° 45°80

15

153.

7

60

180.780

140

651515


E-DH-R774A






45° 45°80

15

191.

7

60

218.780

140651515

Tip （1.5：1）




153.

7

232

45°

1580



Detector

Detector Holder

45° 60

140651515

※オフセット型検出器ホルダは、R55A/B、R60A、R65Aにも取付可能です。ただし、オフセット型検出器ホルダ取付用横送り装置が別途必要です。* Offset type detector holders also can be installed on R55, R60A, R65A.

However, a horizontal feed device for installation of the offset type detector holder must be purchased separately.










14414

36

70162

15 615

1942

.515

1.2


E-DH-R690A



14414

3618

9.2

71156

8046

1515

1942

.5




22314

36

135235

6

1942

.515

1.2




18414

36

96196

15 615

1942

.515

1.2







45° 45°80

15

153.

7

60

180.780

140

651515


E-DH-R774A






45° 45°80

15

191.

7

60

218.780

140651515

Tip （1.5：1）




153.

7

232

45°

1580



Detector

Detector Holder

45° 60

140651515


CNC Detector HoldersApplicable models ■ R55　■ R60A　■ R65A

Offset Type Detector HoldersApplicable models ■ R44　■ R54

44




Planemeasurementholder

E-DH-R391A

Applicable models: R30, R31, R40, R41, R43, R60ACombination detector: E-DT-R74A, E-DT-R32A, E-DT-R10A, E-DT-R87A

E-DH-R614A

Applicable models: R47, R55, R60A, R65ACombination detector: E-DT-R83A, E-DT-R95A, E-DT-R120A, E-DT-R173A, E-DT-R168A

Thin detectorholder

E-DH-R708A

Max. measuring magnification: 2000xFilter: 15, 50 peaks/rotationMeasuring Accuracy: 0.5 μm

Applicable models: R47, R55, R60A, R65AMeasuring diameter: R= 130 mm, R1= 135 mmDetector: E-DT-R130A, E-DT-R140A

E-DH-R653AApplicable models: R47, R55, R60A, R65AMeasuring diameter: R= 115 mm, R1= 120 mmDetector: E-DT-R130A, E-DT-R140A

E-DH-R725AApplicable models: R47, R55, R60A, R65AMeasuring diameter: R= 145 mm, R1= 150 mmDetector: E-DT-R130A, E-DT-R140A

E-DH-R707A

Applicable model: R60A (when CNC holder is used)Measuring diameter: R= 130 mm, R = 135 mmDetector: E-DT-R130A

E-DH-R608A

Applicable model: R60A (when CNC holder is used)Measuring diameter: R= 115 mm, R1= 120 mmDetector: E-DT-R130A

E-DH-R724A

Applicable model: R60A (when CNC holder is used)Measuring diameter: R= 145 mm, R1= 150 mmDetector: E-DT-R130A

Non-contactdetector holder E-DH-R714A Throat height H: 90 mm


Applicable models: R30, R31, R40, R41, R43, R47, R55, R60A, R65ACombination with non-contact detector E-DT-SL12B

Note: CNC detector holder mounter requires extra adaptor to install this holder.

91 5

Standard feed device53

42

37R-axis arm

Standard detector holder

Standard detectorPlane measurement holder(E-DH-R391)

153.7 8

Feed device

53

42

37

R-axis armDetector Holder

DetectorPlane measurement holder(E-DH-R614A)

Thin detector

StylusEM47038-D002

Thin detector holderR1

R

18

45

4.7

4.6

Thin detector

StylusEM47038-D002

Thin detector holderR1

R

18

80

4.7

4.6

1

Non-contact detectorEーDTーSL12B

Standarddetector holder

Non-contact detector holderEーDHーR714A

123

90.5

2270

.5

5884

Special Detector HoldersApplicable models ■ R30/31　■ R40/41　■ R43　■ R44　■ R47　■ R55　■ R60A　■ R65A

Op

tio

ns

45


Magnificationcalibration set

E-MC-R04AMax. calibration range: 400 μmMin. scale interval: 0.2 μmWeight: 1.7 kg

Applicable Models: E-DT-R32A E-DT-R74A E-DT-R87A E-DT-R10A

E-MC-R33AMax. calibration range: 400 μmMin. scale interval: 0.2 μmWeight: 1.7 kg

Applicable Models: E-DT-R83A E-DT-R95A, R120A E-DT-R87A E-DT-R10A E-DT-R32A E-DT-R74A E-DT-R173A E-DT-R168A

Magnificationcalibration master E-MC-R28A Level difference: Approx. 20 μm Applicable models: All models

Master ball

E-MG-R05B

Sphericity: 0.05 μmMaterial: Chrome bearing steel

Applicable models: All modelsE-MG-R05B provided with wooden box.(R60A, R65A: standard accessory)

E-MG-R01B

E-MG-R95A Roundness: 0.035 μmDiameter: φ56.2 mmMaterial: Zerodur

Applicable models: All modelsProvided with wooden box.

Cylindrical square

E-MG-R06A

Cylindricity: 1 μm/150 mm Squareness: 2 μmDimensions: φ60 mm x φ150 mm

Applicable models: All models

E-MG-R08A

Cylindricity: 1.3 μm/200 mm Squareness: 2.5 μmDimensions: φ60 mm x φ200 mm

E-MG-R83A

Cylindricity: 2 μm/400 mm Squareness: 5 μmDimensions: φ92 mm x φ400 mm

High accuracycylindrical square E-MG-R87A

Cylindricity: 0.28 μm/100 mmSquareness: 2 μmDimensions: φ60 mm x φ150 mm

Diameter master E-MG-R88AOD: φ24.5 mmI D: φ13.7 mmActual measured value inscribed

Applicable Models: R60A, R65A, R44, R54

校正器対象機種 ■R31C ■R41C ■R43C ■R44DX/SD ■R47A/B ■R54DX/SD ■R55A/B ■R60A ■R65A


E-MC-R04A

E-MC-R28A

E-MC-R33A

適用機種：E-DT-R32A E-DT-R74A E-DT-R87A E-DT-R10A

最大校正範囲 400μm 最小目量 0.2μm 質量 1.7k g

適用機種：E-DT-R83A E-DT-R95A, R120A E-DT-R87A E-DT-R10A E-DT-R32A E-DT-R74A E-DT-R173A E-DT-R168A


適用機種：全機種段差量約20μm

適用機種：全機種 E-MG-R05Bは木箱付き

真円度 0.05μm 材質クロム軸受鋼

適用機種：全機種木箱付き

真円度 0.035μm 直径 φ56.2mm 材質ゼロデュア

適用機種：全機種

円筒度 1μm/150mm 直角度 2μm サイズ 60×150mm


円筒度 1.3μm/200mm 直角度 2.5μm サイズ φ60×200mm




円筒度 0.28μm/100mm 直角度 2μm サイズ φ60×150mm

適用機種：R60A， R65A R44DX/SD R54DX/SD

外径 φ24.5mm 内径 φ13.7mm 実測値刻印

倍率校正器セット

マスターボール


円筒スコヤ

円筒スコヤ

円筒スコヤ

直径マスター

E-MG-R95A

E-MG-R06A

E-MG-R08A

E-MG-R83A

E-MG-R87A

E-MG-R88A


倍率校正マスター

高精度円筒スコヤ

E-MG-R05B

E-MG-R01B

20

90

60

60

80125

ø20

段差量の実測値刻印

上面図

25

段差量約20μm

52 62 5

ball ø12.7Protective capø40

ø59

2545

60

ø75

69.5

ø56.2ø47 SR29

ステンレス製台座

測定範囲ゼロデュア

B

øA

3

ø19

1620

ø24.7A

1

ø24.5ø13.7

ø5

φA,B：Refer to size.

校正器対象機種 ■R31C ■R41C ■R43C ■R44DX/SD ■R47A/B ■R54DX/SD ■R55A/B ■R60A ■R65A


E-MC-R04A

E-MC-R28A

E-MC-R33A

適用機種：E-DT-R32A E-DT-R74A E-DT-R87A E-DT-R10A


適用機種：E-DT-R83A E-DT-R95A, R120A E-DT-R87A E-DT-R10A E-DT-R32A E-DT-R74A E-DT-R173A E-DT-R168A


適用機種：全機種段差量約20μm

適用機種：全機種 E-MG-R05Bは木箱付き

真円度 0.05μm 材質クロム軸受鋼

適用機種：全機種木箱付き

真円度 0.035μm 直径 φ56.2mm 材質ゼロデュア




円筒度 1.3μm/200mm 直角度 2.5μm サイズ φ60×200mm




円筒度 0.28μm/100mm 直角度 2μm サイズ φ60×150mm

適用機種：R60A， R65A R44DX/SD R54DX/SD

外径 φ24.5mm 内径 φ13.7mm 実測値刻印




円筒スコヤ

円筒スコヤ

円筒スコヤ

直径マスター

E-MG-R95A

E-MG-R06A

E-MG-R08A

E-MG-R83A

E-MG-R87A

E-MG-R88A


倍率校正マスター

高精度円筒スコヤ

E-MG-R05B

E-MG-R01B

20

90

60

60

80125

ø20

段差量の実測値刻印

上面図

25

段差量約20μm

52 62 5

ball ø12.7Protective capø40

ø59

2545

60

ø75

69.5

ø56.2ø47 SR29

ステンレス製台座

測定範囲ゼロデュア

B

øA

3

ø19

1620

ø24.7A

1

ø24.5ø13.7

ø5

φA,B：Refer to size.

CalibratorsApplicable models ■ R30/31　■ R40/41　■ R43　■ R44　■ R47　■ R54　■ R55　■ R60A　■ R65A


20

90

60

60

80125

ø75

69.5

ø56.2ø47 SR29

Stainless steel pedestal

Measuring range

Zerodur

3

ø19

1620

ø24.7A

1

ø24.5

ø13.7

ø5

ø20

Actual level difference inscribed

Top View

25

Level difference: Approx. 20m

52 62 5

46




Scroll chuck

E-WJ-R01C

Securing Range: OD φ2 mm to φ79 mm : I D φ20 mm to φ90 mmOD: φ118 mmHeight: 41 mmWeight: 1 kg


E-WJ-R104A

Securing Range: OD φ45 mm to φ172 mm : ID φ80 mm to φ172 mmOD: φ240 mmHeight: 82 mmWeight: 14 kg

Applicable models: All models (except R43)

Please be noted about the permissible loading weight when mounted on compact RONDCOM series

Pin vice set E-WJ-R411A

Chuck rangeA-1: 0.1 mm to 1.1 mmB-2: 1.2 mm to 2.0 mmA-3: 2.0 mm to 2.5 mmB-4: 2.5 mm to 3.2 mm


Spacer forscroll chuck

E-WJ-R19A Flatness: 0.01 mmWeight: 4.1 kg


Scroll chuckrotation spacer

E-WJ-R20A Weight: 3 kg Applicable models: All models

Iris chuck

E-WJ-R10A

Securing Range: OD: φ5 mm to φ110 mmD= φ172 mm, D1= φ120 mm

(Except R31C and R41C, sub table is requried)Applicable models: All models

E-WJ-R378A Securing Range: OD: φ5 mm to φ150 mmD= φ226 mm, D1= φ160 mm

φ 400 sub table

E-AT-R34A Flatness: 0.01 mmWeight: 14 kg

Applicable models: R65A, R60A, R55

E-AT-R77A Flatness: 0.01 mmWeight: 8 kg

Applicable models: R30, R31, R40, R41, R43, R47, R44, R54

ø61 to ø90 ID chuck

Scroll chuckTop View

ø40 to ø69 ID chuckø20 to ø49 ID chuck

ø2 to ø36 OD chuckø25 to ø59 OD chuck

ø45 to ø79 OD chuck 5

45

5

ø65

100

ø118

35

ø240

82 56

ø100

10 10C

huck

Mounting

place



ø45 to ø77 OD chuck



24

17.3

4-5.5 holes9.5 countersunkDepth: 5.5

ø220

ø196

ø14

8

30

2-M5, Depth 12

100

100

2-5.5 holes 9.5 countersunkDepth: 6

ø13

0

30

ø14

8

ø100

ø10

For 4-M5 scroll chuck

DD1

Tile cross table

ø5

ø220ø100

4-M5, Depth 8 (every 90˚)

4-5.5 holes9.5 countersunk, Depth 5.5 (every 90˚)

4-M5, Depth 8 (every 90˚)M5, Depth 8

ø4 (red)4-M5, depth 8

4-5.5 holes9.5mm countersunk, depth 5.5mm (every 90˚)

M5, through hole

(every 90˚)

ø100

45

調整装置対象機種 ■R31C ■R41C ■R43C ■R44DX/SD ■R47A/B ■R54DX/SD ■R55A/B ■R60A ■R65A


E-WJ-R01C

E-WJ-R104A

E-WJ-R411A

E-WJ-R19A

E-WJ-R20A


固定範囲：外径 φ 2～79mm ：内径 φ20～90mm 外径： φ 118mm 高さ：41mm 質量：1k g


小型のロンコムシリーズに搭載時は、許容積載質量に注意願います。

固定範囲：外径 φ45～172mm ：内径 φ80～172mm 外径： φ 240mm 高さ：82mm 質量：14k g


チャック範囲 A-1：0.1～1.1mm B-2：1.2～2.0mm A-3：2.0～2.5mm B-4：2.5～3.2mm



平面度：0.01mm 質量：4.1k g

質量：3k g

適用機種：R65A, R60A, R55A/B

適用機種：R31C R41C R43C R47A/B R44DX/SD R54DX/SD

平面度：0.01mm 質量：8k g

平面度：0.01mm 質量：14k g

スクロールチャック


ピンバイスセット

スクロールチャック用スペーサ

スクロールチャック回転スペーサ

φ 400 サブテーブル

φ 400 サブテーブル

E-AT-R34A

適用機種：全機種固定範囲：外径φ5～110mm D＝φ172mm、D1＝φ120mm

固定範囲：外径φ5～150mm D＝φ226mm、D1＝φ160mm

アイリスチャック

E-WJ-R10A

E-WJ-R378A

E-AT-R77A

35

ø240

82 56

ø10010 10

チャック部

取付板

ø140～ø172 内径チャック ø80～ø112 内径チャック ø45～ø77 外径チャック

ø92～ø124 外径チャック ø140～ø172 外径チャック

24

17.3

4-5.5キリ 9.5ザグリ深サ5.5

ø220 ø196

41.5

48.5

41

Scroll chuck （E-WJ-R01C）

A-1

B-2

A-3

B-4

コレットA

コレットB

ø148

30

2-M5 深サ12

100

100

2-5.5キリ 9.5ザグリ深サ6

ø130

30

ø148

ø100

ø10

4-M5 スクロールチャック用

ø61～ø90 内径チャック

スクロールチャック上面図

ø40～ø69 内径チャック ø20～ø49 内径チャック

ø2～ø36 外径チャック ø25～ø59 外径チャック

ø45～ø79 外径チャック 5

45 5

ø65

100

ø118

DD1

チルトクロステーブル

ø5

ø220ø100

4-M5, 深サ8（90°毎）

4-5.5キリ 9.5ザグリ, 深サ5.5（90°毎）

4-M5, 深サ8（90°毎） M5, 深サ8

ø4（赤色）4-M5, 深8

4-5.5キリ9.5ザグリ, 深5.5（90°毎）

M5, 通し

（90°毎）

ø100

45°

R31C, R41C 以外は、サブテーブルが必要です。

Adjustment DeviceApplicable models ■ R30/31　■ R40/41　■ R43　■ R44　■ R47 　■ R54　■ R55　■ R60A　■ R65A

Op

tio

ns

47


Bench E-DK-R56A Dimensions: 570 mm (W) x 490 mm (D) x 652 mm (H)

Applicable models: R30, R31, R40, R41, R43

Bench for desktopanti-vibrationtable

E-VS-S13ADimensions: 510 mm (W) x 430 mm (D) x 643 mm (H)Weight: 22 kg For E-VS-S57A/B, E-VS-S58A

Desktopanti-vibrationtable

E-VS-S57B

Anti-vibration system: Diaphragm air springNatural frequency: 2.5 Hz to 3.5 HzLoad weight: 130 kgDimensions: 600 mm (W) x 530 mm (D) x 60 mm (H)Air Source: 350 kPa to 700 kPaWeight: 25 kg

Anti-vibrationtable (H: 700)

E-VS-R16B

Anti-vibration system: Diaphragm air springNatural frequency: V= 2 Hz, H= 2.2 HzLoad weight: 250 kgAir Source: 350 kPa to 700 kPaDimensions: 980 mm (W) x 780 mm (D) x 700 mm (H) 760 mm (W1) x 560 mm (D1)Weight: 190 kg

Applicable models: R44, R54

E-VS-S21B

Anti-vibration system: Diaphragm air springNatural frequency: V= 1.6 Hz, H= 2 HzLoad weight: 550 kgAir Source: 350 kPa to 700 kPaDimensions: 1074 mm (W) x 824 mm (D) x 700 mm (H) 850 mm (W1) x 560 mm (D1)Weight: 340 kg


Anti-vibrationtable (H: 500) E-VS-R20B

Anti-vibration system: Diaphragm air springNatural frequency: V= 1.5 Hz, H= 2 HzLoad weight: 550 kgAir Source: 350 kPa to 700 kPaDimensions: 1074 mm (W) x 824 mm (D) x 500 mm (H) 850 mm (W1) x 560 mm (D1)Weight: 340 kg


Anti-vibrationtable (H: 500)High magnificationmeasuring

E-VS-R24A

Anti-vibration system: Diaphragm air springNatural frequency: V= 2.2 Hz, H= 2.5 HzLoad weight: 600 kgAir Source: 350 kPa to 700 kPaDimensions: 1060 mm (W) x 875 mm (D) x 500 mm (H) 820 mm (W1) x 640 mm (D1)Weight: 380 kg

Applicable model: R60A (Z800)

Bench E-DK-R16A Dimensions: 700 mm (W) x 600 mm (D) x 700 mm (H) Applicable models: R44, R54

Desk

E-DK-R19A Dimensions: 1000 mm (W) x 600 mm (D) x 700 mm (H) Applicable models: All models

E-DK-R34A Dimensions: 400 mm (W) x 700 mm (D) x 700 mm (H) Applicable models: All models

System rack

E-DK-S24ADimensions: 800 mm (W) x 800 mm (D) x (1070 mm to 1370 mm) (H)Weight: 44.5 kg

E-DK-S25A Dimensions: 1200 mm (W) x 800 mm (D) x (1070 mm to 1370 mm) (H)

490

510 430

570

652

周辺装置対象機種 ■R31C ■R41C ■R43C ■R44DX/SD ■R47A/B ■R54DX/SD ■R55A/B ■R60A ■R65A


E-DK-R56A

適用機種：R30C， R31C， R40C R41C， R43C 寸法：570 W×490 D×652 Hmm

寸法：600 W×530 D×60 Hmm 空気源：350～700kPa 質量：25k g

除振方式：ダイヤフラム空気バネ固有振動数：2.5～3.5Hz 積載質量：130k g

適用機種：R44SD， R54SD 寸法：980 W×780 D×700 Hmm 760 w1×560 D1 mm 質量：190k g

除振方式：ダイヤフラム空気バネ固有振動数：V；2Hz， H；2.2Hz 積載質量：250k g 空気源：350～700kPa

適用機種：R55B， R60A， R47A/B 寸法：1074 W×824 D×700 Hmm 850 w1×560 D1 mm 質量：340k g

除振方式：ダイヤフラム空気バネ固有振動数：V；1.6Hz， H；2Hz 積載質量：550k g 空気源：350～700kPa

適用機種：R55B， R60A， R47A/B 寸法：1074 W×824 D×500 Hmm 850 w1×560 D1 mm 質量：340k g

除振方式：ダイヤフラム空気バネ固有振動数：V；1.5Hz， H；2Hz 積載質量：550k g 空気源：350～700kPa

適用機種：全機種寸法：1000 W×630 D×700 Hmm


寸法：800 W×800 D×1070～1370 Hmm 質量：44.5k g

寸法：1200 W×800 D×1070～1370 Hmm

適用機種：R44SD， R54SD 寸法：700 W×600 D×700 Hmm

架台

E-VS-S57B卓上型除振台

E-VS-R16B除振台（H：700）

E-VS-S21A除振台（H：700）

E-VS-R20A除振台（H：500）

適用機種：R60A （Z800）用寸法：1060 W×875 D×500 Hmm 820 w1×640 D1mm 質量：380k g

除振方式：ダイヤフラム空気バネ固有振動数：V；2.2Hz, H；2.5Hz 積載質量：600k g 空気源：350～700kPa

E-VS-R24A除振台（H：500）高倍率測定用

E-DK-R16A架台

E-DK-R19Aデスク

E-DK-R34A

デスク

E-DK-S24Aシステムラック

E-DK-S25Aシステムラック

卓上型除振台用架台

E-VS-S13A寸法 : 510 W×430 D×643 Hmm 質量 : 22kg E-VS-S57A/B, E-VS-S58A用

510

430

643

510

標準在庫品

490

510 430

570

652

600440

530

360

4060

H

D1W1

W D

W

D

670

H

420

700

400 700

007

630 1000

660

700

625 525

600700

40

600440

530

360

40

60

H

D1W1

W D

660

700

625 525

600700

40

700

630 1000

700

400 700

W

D

670

H

420

PeripheralsApplicable models ■ R30/31　■ R40/41　■ R43　■ R44　■ R47　■ R54　■ R55　■ R60A　■ R65A


48




Power transformer box E-TF-R25A

Input: 90 V to 240 VOutput: 100 VCapacitance: 2.1 kVADimensions: 300 mm (W) x 350 mm (D) x 296 mm (H)Weight: 45 kg

Please specify input voltage.

Water separator L-WF-R08A Dimensions: 100 mm (W) x 80 mm (D) x 280 mm (H) Applicable models: All models

Oil separator L-WF-R07AFiltration: 0.1 μmDimensions: 100 mm (W) x 190 mm (H)Weight: 1.7 kg


Air purifier set L-WF-R11A

Install L-WF-R08A water separator, L-WF-R07A oil separatoron mounting plateDimensions: 320 mm (W) x 170 mm (D) x 378.5 mm (H)


L-WF-R03B

Max. flow: 100 ℓ /minPower consumption: 165 W/195 W (50 Hz/60 Hz)Weight: 15 kgDimensions: 200 mm (W) x 350 mm (D) x 400 mm (H)For AC 100 V

Refrigerating type air dryer L-WF-R27A

Max. flow: 200 ℓ /minPower consumption: 210 W (50 Hz/60 Hz)Weight: 27 kgDimensions: 226 mm (W) x 410 mm (D) x 445 mm (H)For AC 200 V to 240 V Separate transformer type

Applicable models: All models (table rotating type)

L-WF-R24A

Max. flow: 200 ℓ /minPower consumption: 180 W/202 W (50 Hz/60 Hz)Weight: 18 kgDimensions: 226 mm (W) x 410 mm (D) x 473 mm (H)For AC 230 V CE marking

N.P

280

300

16

100

280

Remove telescopic nipple on regulator set and connect to ball valve (1/4 connection dia.)

Air source: 4.5 to 7kg/cm2

80

Telescopic nipple (1/4 connection dia.)

3m air tube

Drain receiver

Mounting plate

Double-side tape(4 locations)

203.6

ø106

70

162

PT1/4

1/4

Residual pressure bleeder valve

115.

5

PT1/4Air supply port

OUT IN

Oil frantz

F301


L-WF-R08A

L-WF-R07A


適用機種：全機種寸法：100 W×190 Hmm 質量：1.7k g

適用機種：全機種寸法：320 W×170 D×378.5 Hmm

ろ過度：0.1μm

入力電圧をご指定ください。寸法：300 W×350 D×296 Hmm 質量：45k g

入力：90V～240V 出力：100V 容量：2.1KVA

適用機種：全機種（テーブル回転タイプ）寸法：200 W×350 D×400 Hmm AC100V用

消費電力：165/195W (50/60Hz）

消費電力：210W (50/60Hz）

消費電力：180/202W (50/60Hz）

質量：15kg

適用機種：全機種（テーブル回転タイプ）寸法：226 W×410 D×445 Hmm AC200～240V用トランス別置型

質量：27kg

適用機種：全機種（テーブル回転タイプ）寸法：226 W×410 D×473 Hmm AC230V用CEマーク

質量：18kg

水取器L-WF-R08A 油取器L-WF-R07Aを取付板にセット

水取器

E-TF-R25A電源トランスボックス

油取器

L-WF-R03B

空気浄化器セット L-WF-R11A

冷凍式エアドライヤ L-WF-R27A

L-WF-R24A

100

280

レギュレータセットの竹の子ニップルを取り外し、ボールバルブに接続

空気源 4.5～7kg/cm2

80

（接続口径 1/4）

竹の子ニップル（接続口径 1/4）エアーチューブ 3m

ドレン受け

取付板金

両面テープ（4カ所）

203.6

ø106

70

162

PT1/4

1/4残圧抜き弁

115.

5

PT1/4エアー供給口

OUT IN

オイルフランツ F301

320

378.

5

To measuring instrument（PT1/4）

Half union(1/4)

Air supply portPT1/4

Residual pressure bleeder valve (1/4)

OUTINOUTIN

OUTIN

Polyurethane tubeOutside diameterø8

ブッシュ（3/8×1/4）

10m

D

H

W （900）

ホース継口

継口へ

（ø6ホース）インサート継手

ランプ付スイッチ

ドレン確認窓

電源コードアースプラグ付（L=1800）

（ø6）ドレンチューブ

エアー供給口

（ø6, 1/4）

N.P

280

300

16

最大流量：100 /min

最大流量：200 /min

最大流量：200 /min Bushing (3/8 x 1/4)

10m

D

H

W 900

Hose connection

To connection

(ø6 hose)

Insert connector

Switch with indicator lampDrain check window

Power cord with grounded plug

(L=1800)

Drain tube (ø6)

Air supply port

(ø6, 1/4)


Op

tio

ns

49

Name Model Applicable system Remarks

Polar recordingpaper

E-CH-R04A 10A， 20A， 50A/B， 52A/B， 70A/B， 71A/B Thermal recording paper 100 sheets/box

Polar A4 trace sepia 6A, 50A/B-400, 70A/B, 71A/B-400 amplifier Piston type, 100 sheets/box

Rectilinearrecording paper

E-CH-R05A 50B， 52B， 70B， 71B Thermal recording paper 10 rolls/boxRecording width: 40 mm

I-250-125 6A, 50A/B-400, 70A/B, 71A/B-400 amplifier Piston type, 10 rolls/box

Printing Paper

E-CH-R06A 30A/B/C， 40A/C， 45A Thermal recording paper 10 rolls/boxRecording width: 104 mm

E-CH-S05A 50B, 52B, 70B, 71B-300 amplifier Thermal recording paper 10 rolls/boxRecording width: 40 mm

Recording paper E-CH-S03A 50A/B, 52A/B, 70A/B, 71A/B-500 amplifier Thermal recording paper 10 rolls/boxRecording width: 120 mm

IC pen KT202-A 10A， 20A， 50A/B， 52A/B， 70A/B， 71A/B， 15MASubstitute for KT102(Adjustment required by our engineer at the first installation)

Polar marking pen CP-192 (red) 6A, 50A/B-400, 70A/B, 71A/B-400 amplifier Piston type

Rectilinear marking pen CP-092 (red) 6A, 50A/B-400, 70A/B, 71A/B-400 amplifier Piston type

Filter element AFD20P-060AS 15MA, 30C, 31C, 40C, 41C, 43C, 46A, 47A/B, 44DX/SD, 54DX/SD, 55A/B, 60A, 65A

Micro filter element AFM20P-060AS 15MA, 30C, 31C, 40C, 41C, 43C, 46A, 47A/B, 44DX/SD, 54DX/SD, 55A/B, 60A, 65A

Consumables


50


Standard detector E-DT-R244A

Measuring range: ±800 μmMeasuring force: 0.07 N (70 mN)With front adjustment mechanism

Standard accessory for R73AGeneral purpose stylus [0194 412]φ1.6 mm Carbide ball (standard accessory)* Component of standard detector and styli set Note: General purpose stylus [0194 412] is not included in this set.

Standard detector holder E-DH-R550A －

Standard accessory for R73AComponents: 1) Shaft mount (1 pc) 2) Shaft (1 pc) 3) Holder C (1 pc)Note: Standard configurations of this system also include the detector shown to the left (E-DT-R244A) and stylus (0194412).

Long shaft measuring tool for standard detector

E-DH-R413BHighest measuring magnification: 2000xFilter: 15, 50 peaks/rotation

Option for R73AComponents: 1) Shaft mount (1 pc) 2) Shaft A (1 pc) 3) Shaft B (1 pc) 4) Holder A (1 pc) 5) Holder C (1 pc) 6) Holder F 1 (1 pc) 7) Holder F 2 (1 pc)Note 1: Detector shown to the left (E-DT-R244A) or general purpose stylus (0194412) are not included.Note 2: Carrying case is included.

All position detector E-DT-R253A

Measuring range: ±1000 μmMeasuring force: 30 mN to 100 mNID / OD swich functionFront / over travel adjustment functionEmergency stop function

Option for R73AGeneral purpose stylus [EM46000-S302], φ1.6 mm carbide ball is not included.

* Component of all position detector and styli set

All position detector holder E-DH-R533A －

Option for R73AComponents: 1) Shaft mount (1 pc) 2) Shaft (1 pc) 3) Holder C (1 pc)Note: Detector shown to the left (E-DT-R253A) or stylus (EM46000-S302) are not included.

Long shaft measuring tool for all position detector

E-DH-R534AHighest measuring magnification: 2000xFilter: 15, 50 peaks/rotation

Option for R73AComponents: 1) Shaft mount (1 pc) 2) Shaft A (1 pc) 3) Shaft B (1 pc) 4) Holder A (1 pc) 5) Holder C (1 pc) 6) Holder F 1 (1 pc) 7) Holder F 2 (1 pc)Note 1: Detector shown to the left (E-DT-R253A) or general purpose stylus (EM46000-S302) are not included.Note 2: Carrying case is included.

PA detector E-DT-R259A

Stylus arm a Sensitivity: 1:1, length: 76 mm, Tip sphere: R0.25 mm, sapphire Measuring range: ±500 μm Measuring force: 130 mNStylus arm b Sensitivity: 2:1, length: 201 mm, Tip sphere: R0.25 mm, sapphire Measuring range: ±1000 μm Measuring force: 65 mN

With ID / OD swich function and Front adjustment function

Option for R73AComponents: 1) PA detector (E-DT-R259A) 2) PA detector holder (E-DH-R565A)

Detectors / Holders


Detector Rotaing Type RONDCOM 73 Options

23Ø67

24.1 12.2

205039.2

14

Position measuring upper surfaceStylus

Detector(261)

(51)

(91)

(38)

(156)

(182)

144 Ø22

10412842

(235)

26

24

Ø90

Holder AØ22

620

26532

506

(24.1)

holder CHolder C

Shaft AHolder F1

Holder F2

R108R108120

120

Top view

Top view

(Detector)

(Detector)

(1:1 Stylus)

(2:1 Stylus)

90°

90°

81.5

18935Ø24.6

Ø13

81 7353

Detector(Option)

ＥＭ４６０００－Ｓ３０２

30

Stylus (option)

24104

81.5( 235.3 )

128

26

Ø22

Detector(Option)

Stylus(Option)EM46000-S302

Minimum diameterφ30of measurment

Shaft A

263

Ø22AA

620

R100



Holder F2

Holder F1

119

Shaft B

620

124.3R108

6.4

R108

81.5

124.3

3 25

Ø128 A-A

Holder A

( 205.1)

R68

Holder C

Stylus arm b

30 PA detector holderE-DH-R565A

Stylus arm a

DetctorＥ－ＤＴ－R265A38

38

120

Ø6

27.3

74.3

I.DO.D

Op

tio

ns

51


Spline measurement attachment

E-DA-R203A －Option for PA detectorFor notched surface

Detector set for cam hole measurement

E-DT-R260A

Highest measuring magnification: 1000xFilter: 15, 50 peaks/rotationDetection range: ±200 μmMin. measuring diameter: φ27 mmMax. measuring depth: 460 mmNote: At time of measuring inner

diameter of small hole, conduct centerling / tilting adequatly before inserting detector into hole.

Option for R73AComponents: 1) Long shaft measuring tool 2) Thin detector (E-DT-R264A) 3) Stylus (EM47038-S002)

Detector set for crankshaft measurement

E-DT-R269A

Highest measuring magnification: 2000xFilter: 15, 50 peaks/rotationUp/down speed: 15 mm/s or less

Option for R73AFor φ22 shaft diameter of long shaft measuring toolComponents: 1) Detector holder for crankshaft (select any of below) ・E-DH-R473A: R=110 mm, R1=130 mm ・E-DH-R467A: R=130 mm, R1=156 mm ・E-DH-R410A: R=145 mm, R1= 162 mm2) Thin detector (E-DT-R264A)3) Stylus for thin detector (EM47038-S002)

E-DT-R270A

E-DT-R271A

E-DH-R473A

Highest measuring magnification: 2000xFilter: 15, 50 peaks/rotationUp/down speed: 15 mm/s or less

Option for R73AFor φ22 shaft diameter of long shaft measuring toolR=110 mm, R1=130 mm

Detector holder for crankshaft

E-DH-R467AOption for R73AFor φ22 shaft diameter of long shaft measuring toolR=130 mm, R1=156 mm

E-DH-R410AOption for R73AFor φ22 shaft diameter of long shaft measuring toolR=145 mm, R1=162 mm

Thin detector E-DT-R264ADetection range: ±200 μmMeasuring force: 15 mNFront travel: 500 μm to 700 μm

Option for R73AFor cam hole and crankshaft measurement

Stylus for thin detector

EM47038-S002

φ2 mm, carbide ballOverhang: 3.5 mmDistance between holder and workpiece: 1.5 mm

For cam hole and crankshaft measurement

EM47051-S001φ2 mm, carbide ballOverhang: 5.5 mm

Detector

1056

StylusSpline measurement attachment

534

110

70

(Ø27)

Ø20

5.73.5

446032

94.5

Ø38

Code holderFixing knob

4934.64.6

(119)

18

137

4.7

R1

R

φ22

Thin detector

Stylus forthin detector

Code holderFixing knob

4934.64.6

(119)

18

137

4.7

R1

R

Thin detector

Stylus forthin detector

ACCRETECH 19

8620 4.7

40.3

33.5 5.7

8.4

1

1

30°

30°

φ2 carbide ball

φ8

φ2.7

40.3

33.5 5.7

90°

6.4

1

1

30°

30°

3.7

φ2 carbide ball

52



Styli 1:1 E-DT-PA same sensitivity L=24.1 mm

Measuring application Model External view Specifications and Remarks

General purpose 0194 410φ3.2 mmCarbide ball* Component of standard detector and styli set

Small holes 0194 411φ1 mmCarbide ball* Component of standard detector and styli set

General purpose 0194 412φ1.6 mmCarbide ball* Standard accessory

Grooves 0194 413R0.25 mm, 55° conicalSapphire

Deep grooves 0194 414R0.25 mm, 55° conicalSapphire* Component of standard detector and styli set

Corners 0194 415R0.25 mm, 55° conicalSapphire

0194 416R0.25 mm, 55° conicalSapphire

0194 417R0.25 mm, 55° conicalSapphire* Component of standard detector and styli set

Deep grooves 0194 418R0.25 mm, 55° conicalSapphire

Extra small holes 0194 419φ0.5 mmCarbide ball

Cutter mark removal

0194 420R0.25 mm,Sapphire

Styli: 2:1 Sensitivity


General purpose

0194 432φ1.6 mmCarbide ball

EM49401-S313φ2 mmRuby ball

Valve holes EM49401-S31560° tiltR0.25 mm, 55° conical Sapphire, offset 2.175 mm

Stylus set　* Above mentioned items in are components of standard detector and styli set.

Name Model External view Specifications and Remarks

Standard detector and styli set

E-DT-R267A

Combination of standard detector ［E-DT-R244A］ and styli listed to the left

Components:　　　1） Standard detector ［E-DT-R244A］　　　2） General purpose stylus ［0194 410］　　　3） Small hole stylus ［0194 411］　　　4） Deep groove stylus ［0194 414］　　　5） Groove stylus 　［0194 417］

Note: General purpose stylus ［0194 412］ is not included in this set.

Styli

10.14.5

103.6

6.5

1020

2

4.8

15.5

68.5

15.5

24.1

1.5

5.5

1010

24.1

5.5

2.17

0.97

19.4

24.1

1.5

5.5

1010

24.1

1.5

5.5

1010

Grooves

Op

tio

ns

53


Stylus arm

Stylus arm a M-1014A-0001With R0.25 mm, Sapphire stylus [010 1080]

Stylus arm b M-1014B-0002

Stylus arm φ4 M-1014C-0003

* Component of stylus kit for PA detectorReplaceable stylus arm

M-1014D-0004

PipeFor manufacturing special arm

M-1014A-0505φ6 x φ180.2 mm

* Component of stylus kit for PA detector

Holder

Holder on detector side M-1014A-0501

Holder on stylus side M-1014A-0502 * Component of stylus kit for PA detector

Special holder M-1017H-0401

Stylus

General purpose 0194 412 * Component of stylus kit for PA detector

0101 093R0.25 mm, 55° conicalSapphire (both sides) φ2 mm

0101 079

Both sides 0101 080

R0.25 mm, 55° conicalSapphire (both sides) φ2 mm* Component of stylus kit for PA detector

0101 081

0101 083

One side 0101 089R0.25 mm, 55° conicalSapphire (one side) φ2 mm* Component of stylus kit for PA detector

Pipe bender 364-FHAM6 * Component of stylus kit for PA detector

Cutting machine TC-1050 * Component of stylus kit for PA detector

Stylus kit　* Above mentioned items in are components of stylus kit for PA detector.

Name Model Components

Stylus kit for PA detector

E-DA-R205A

Stylus arm φ4 M-1014C-0003 x 1 pc.

Replaceable stylus arm M-1014D-0004 x 1 pc.

General purpose stylus 0194 412 x 5 pc.

Holder on detector side M-1014A-0501 x 5 pc.

Pipe for manufacturing special arm M-1014A-0505 x 5 pc.

Holder on stylus side M-1014A-0502 x 5 pc.

Special holder M-1017H-0401 x 5 pc.

Stylus (Both sides)

0101 079 x 5 pc. L=6.50101 080 x 5 pc. L=7.50101 081 x 5 pc. L=100101 083 x 5 pc. L=20

Stylus (one side) 0101 089 x 5 pc.

Pipe bender 364-FHAM6 x 1 pc.

Cutting machine TC-1050 x 1 pc.

Styli (for PA detector)

Sapphire(both sides)Stylus tip R0.25, Conie angle 55°Ø

2

L

StylusPipe

Sapphire(one side)Stylus tip R0.25, Conie angle 55°Ø2

30

Ø6

76.3

Ø6

201.5

Ø4

76.3

76.3

24.152.2

Ø6

180.2

17.3

Ø6

Stylus

StylusPipe

10.1

5.5

6.5

7.5

10

20

30

Ø1.6mm Tungsten carbite ball

17.3

Ø6

Ø6

24.1

52.2

19

Ø6

Ø4

Stylus

(2:1 Sensitivity)

7.63

201.5

(1:1 Sensitivity)

10

180.2

Stylus

54



Stylus: 1:1 Standard sensitivity L=59.5 mm


General purpose EM46000-S300 φ3.2 mmCarbide ball* Component of all position detector and styli set

Small holes EM46000-S301 φ1 mmCarbide ball* Component of all position detector and styli set

General purpose EM46000-S302 φ1.6 mmCarbide ball* Accessory for all position detector

Grooves EM46000-S303 R0.25 mm, 55° ConicalSapphire

Deep grooves EM46000-S304 R0.25 mm, 55° ConicalSapphire* Component of all position detector and styli set

Corners EM46000-S305 R0.25 mm, 55° ConicalSapphire

EM46000-S306 R0.25 mm, 55° ConicalSapphire

EM46000-S307 R0.25 mm, 55° ConicalSapphire* Component of all position detector and styli set


Extra small holes EM46000-S309 φ0.5 mmCarbide ball

Cutter mark removal EM46000-S310 R0.25 mm,

Sapphire

Stylus set　* Above mentioned items in are components of standard detector and styli set.


All position detector and styli set

E-DT-R268A

Combination of all position detector ［E-DT-R253A］ and styli listed to the left

Components: 1) All position detector ［E-DT-R253A］ 2) General purpose stylus ［EM46000-S300］ 3) Small hole stylus ［EM46000-S301］ 4) Deep groove stylus ［EM46000-S304] 5) Groove stylus [EM46000-S307]

Note: General purpose stylus ［EM46000-S302］ is not included in this set.

Styli (for All Position Detector)

ø5ø3 （ø2）

5.5 (1.6)59.5

ø3.2 Carbide ball6.5

66.6

ø5ø3 ø0.7

5.5 （0.5）59.5


65.5

ø5ø3 ø1.2

5.5 (0.8)59.5


65.8

ø5ø3

5.5 (1.5)58.2

6.5

65.2

ø24.5

R0.25 55 conical sapphire

ø5ø3

5.5 (1.5)58.2

6.5

65.2

ø2

10

R0.25 55 conical sapphire

ø5ø3

5.5

(1.5)

58.2

6.5

63.7 ø2R0.25 55 conical sapphire

(3.4)

60°

R0.25 55conical sapphire 　　　 (both sides)

ø2

6.5ø5ø3

5.5 (1)58.2

6.5

64.7

ø2

10

R0.25 55conical sapphire 　　　　(both sides)

ø5ø3

5.5 (1)58.2

6.5

64.7

ø2

20

R0.25 55conical sapphire 　　　　(both sides)

ø5ø3

5.5 (1)58.2

6.5

64.7

2

ø0.5 carbide ball

ø5

5.5 （0.25）59.5

6.5

65.3

ø3 ø0.5

ø0.3

ø5ø3

5.5 （1.5）58.2

6.5

65.2R0.25sapphireø2

4.8

60°R15

ø5ø3 （ø2）

5.5 （1.6）59.5

ø3.2Carbide ball6.5

66.6

ø5ø3 ø0.7

5.5 （0.5）59.5


65.5

ø5ø3

5.5 （1.5）58.2

6.5

65.2

ø2

10

R0.25 55°conical sapphire

ø2

10

R0.25 55°conical sapphire 　　　　(both sides)

ø5ø3

5.5 （1）58.2

6.5

64.7

ø5ø3 （ø2）

5.5 （1.6）59.5


66.6

ø5ø3 ø0.7

5.5 （0.5）59.5


65.5

ø5ø3

5.5 （1.5）58.2

6.5

65.2

ø2

10


ø2

10


ø5ø3

5.5 （1）58.2

6.5

64.7

ø5ø3 （ø2）

5.5 （1.6）59.5


66.6

ø5ø3 ø0.7

5.5 （0.5）59.5


65.5

ø5ø3

5.5 （1.5）58.2

6.5

65.2

ø2

10


ø2

10


ø5ø3

5.5 （1）58.2

6.5

64.7

ø5ø3 （ø2）

5.5 （1.6）59.5


66.6

ø5ø3 ø0.7

5.5 （0.5）59.5


65.5

ø5ø3

5.5 （1.5）58.2

6.5

65.2

ø2

10


ø2

10


ø5ø3

5.5 （1）58.2

6.5

64.7

Grooves

Op

tio

ns

55

Stylus: 1.5:1 Standard sensitivity L=97 mm



Small holes EM46100-S301 φ1 mmCarbide ball


Grooves EM46100-S303 R0.25 mm, 55° ConicalSapphire

Deep grooves EM46100-S304 R0.25 mm, 55° ConicalSapphire

Corners EM46100-S305 R0.25 mm, 55° ConicalSapphire

Grooves

EM46100-S306

R0.25 mm, 55° ConicalSapphire

EM46100-S307

Deep grooves EM46100-S308 R0.25 mm, 55° ConicalSapphire

Extra small holes EM46100-S309 φ0.5 mmCarbide ball

Cutter mark removal

EM46100-S310 R0.25 mm,Sapphire

Stylus attachment EM-59103-S001Attachment used when 2:1 stylus for standard detector [E-DT-R244A] is inserted into all position detector [E-DT-R253A]

ø5ø3 （ø2）

5.5 （1.6）97


104.1

ø5ø3 ø0.7

5.5 （0.5）97


103

ø5ø3 ø1.2

5.5 （0.8）96.2


103.2

ø5ø3

5.5 （1.5）96.2

6.5

103.2

ø24.5


ø5ø3

5.5 （1.5）96.2

6.5

103.2

ø2

10


ø5ø3

5.5

（1.5）

96.2

6.5

101.7 ø2R0.25 55°conical sapphire

（3.4）

60°


ø2

6.5ø5ø3

5.5 （1）96.2

6.5

102.7

ø2

10


ø5ø3

5.5 （1）96.2

6.5

102.7

ø2

20ø5ø3

5.5 （1）96.2

6.5

102.7


2

ø0.5 steel ball

ø5

5.5 （0.25）97

6.5

102.8

ø3 ø0.5

ø0.3

ø5ø3

5.5 （1.5）96.2

6.5

103.2R0.25sapphireø2

4.8

60°R15

ø56.5

Stylus attachment10.5

56



E-DT-LJ-R603

Measuring range: ±400 μmMeasuring force: 70 mNFront adjustment mechanismID/OD switch functionStylus: φ1.6 carbide ball

Applicable model: R71CFor a long-shaft measuring tool(0194 412) option

Detector

E-DT-R60A

Measuring range: ±400 μmMeasuring force: 70 mNMount: φ6 mm post mountFront adjustment functionID/OD switch functionStylus: φ1.6 carbide ball

Applicable models: R72A, R76A(0194 412) option

E-DT-R67A

Measuring range: ±800 μmMeasuring force: 70 mNMount: φ6 mm post mountFront adjustment function

Applicable models: R72A (Standard accessory), R76A

Detectorholder

E-DH-R416A Standard accessory for R72A

(Same sensitivity as E-DT-PA) L= 24.1 mm

Generalpurpose

0194 410φ3.2 mmCarbide ball

Small holes 0194 411φ1 mmCarbide ball

Generalpurpose

0194 412φ1.6 mmCarbide ballStandard stylus

Small holes 0194 413R0.25 mm, 55° ConicalSapphire

ロンコム71C/72A/76A用付属品　検出器/ホルダ/測定子

標準在庫品

名称

汎用検出器

型式

E-DT-LJ-R603

様仕図観外

測定範囲 ±400μm測定力 70mNフロント調整機構付き内外径切替機能付き

摘要

適用機種：R71C長軸測定具用測定子φ1.6超硬ボール（0194 412）オプション

φ6 post mount

14 (19)

12.2

3.5 50

0.01.0

1816 23

(2.5)

2

Front adjustment mechanism

ID/OD measuring direction switch lever

汎用 0194 410 φ3.2mm超硬ボール

24.1

1.5

5.5

11

4.5

小穴 0194 411 φ1mm超硬ボール

汎用 0194 412 φ1.6mm超硬ボール標準測定子

小穴 0194 413 RO.25mm，55° 円錐サファイア L型 L＝4.5mm

検出器 E-DT-R60A

測定範囲 ±400μm測定力 70mN取付部 φ6 mmポストマウントフロント調整機能付き内外径切替機能付き

適用機種：R72A,R76A測定子φ1.6超硬ボール（0194 412）オプションφ6 post mount

14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2



検出器 E-DT-R67A

測定範囲 ±800μm測定力 70 mN取付部 φ6 mmポストマウントフロント調整機能付き

R72A標準付属品適用機種：R76A

14

7

φ6

23

(2.5)

φ6 post mount

φ1/16" carbide ball


205039.2

24.112.2

検出器ホルダ

(E-DT-PA と同一感度) L=24.1mm

E-DH-R416A R72A標準付属品

42128

φ22

Detector(E-DT-R67A)

Detector0194412

104 24

26(235)

119

23142



標準在庫品

名称

汎用検出器

型式

E-DT-LJ-R603

様仕図観外


摘要


φ6 post mount

14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2




24.1

1.5

5.5

11

4.5




検出器 E-DT-R60A



14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2



検出器 E-DT-R67A



14

7

φ6

23

(2.5)

φ6 post mount



205039.2

24.112.2

検出器ホルダ



42128

φ22

Detector(E-DT-R67A)

Detector0194412

104 24

26(235)

119

23142



標準在庫品

名称

汎用検出器

型式

E-DT-LJ-R603

様仕図観外


摘要


φ6 post mount

14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2




24.1

1.5

5.5

11

4.5




検出器 E-DT-R60A



14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2



検出器 E-DT-R67A



14

7

φ6

23

(2.5)

φ6 post mount



205039.2

24.112.2

検出器ホルダ



42128

φ22

Detector(E-DT-R67A)

Detector0194412

104 24

26(235)

119

23142



標準在庫品

名称

汎用検出器

型式

E-DT-LJ-R603

様仕図観外


摘要


φ6 post mount

14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2




24.1

1.5

5.5

11

4.5




検出器 E-DT-R60A



14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2



検出器 E-DT-R67A



14

7

φ6

23

(2.5)

φ6 post mount



205039.2

24.112.2

検出器ホルダ



42128

φ22

Detector(E-DT-R67A)

Detector0194412

104 24

26(235)

119

23142



標準在庫品

名称

汎用検出器

型式

E-DT-LJ-R603

様仕図観外


摘要


φ6 post mount

14 (19)

12.2

3.5 50

0.01.0

1816 23

(2.5)

2




24.1

1.5

5.5

11

4.5




検出器 E-DT-R60A



14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2



検出器 E-DT-R67A



14

7

φ6

23

(2.5)

φ6 post mount



205039.2

24.112.2

検出器ホルダ



42128

φ22

Detector(E-DT-R67A)

Detector0194412

104 24

26(235)

119

23142



標準在庫品

名称

汎用検出器

型式

E-DT-LJ-R603

様仕図観外


摘要


φ6 post mount

14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2




24.1

1.5

5.5

11

4.5




検出器 E-DT-R60A



14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2



検出器 E-DT-R67A



14

7

φ6

23

(2.5)

φ6 post mount



205039.2

24.112.2

検出器ホルダ



42128

φ22

Detector(E-DT-R67A)

Detector0194412

104 24

26(235)

119

23142



標準在庫品

名称

汎用検出器

型式

E-DT-LJ-R603

様仕図観外


摘要


φ6 post mount

14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2




24.1

1.5

5.5

11

4.5




検出器 E-DT-R60A



14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2



検出器 E-DT-R67A



14

7

φ6

23

(2.5)

φ6 post mount



205039.2

24.112.2

検出器ホルダ



42128

φ22

Detector(E-DT-R67A)

Detector0194412

104 24

26(235)

119

23142



標準在庫品

名称

汎用検出器

型式

E-DT-LJ-R603

様仕図観外


摘要


φ6 post mount

14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2




24.1

1.5

5.5

11

4.5




検出器 E-DT-R60A



14 (19)

12.2

3.5 50

0.01.0

18

16 23(2.5)

2



検出器 E-DT-R67A



14

7

φ6

23

(2.5)

φ6 post mount



205039.2

24.112.2

検出器ホルダ



42128

φ22

Detector(E-DT-R67A)

Detector0194412

104 24

26(235)

119

23142


Detector / Holder / Stylus


Detector Rotaing TypeRONDCOM 71C/72A/75GB/R76A Options


Op

tio

ns

57


Deep grooves

0194 414R0.25 mm, 55° ConicalSapphire

Corners 0194 415R0.25 mm, 55° ConicalSapphire

Grooves

0194 416

R0.25 mm, 55° ConicalSapphire

0194 417

Deep grooves

0194 418R0.25 mm, 55° ConicalSapphire

Extra smallholes

0194 419φ0.5 mmSteel ball

Cutter markremoval

0194 420R0.25 mmSapphire

Stylus(generalpurpose)

0194 4322:1 sensitivityφ1.6 mmCarbide ball

Generalpurpose

EM49401-S3132:1 sensitivityφ2 mmRuby ball

Valve hole EM49401-S315

2:1 sensitivity60° tilt, R0.25 mm, 55° ConicalSapphire offset: 2.175 mm

E-DT-R03B General purpose stylus: 0194 410 φ3.2 carbide ballSmall hole stylus: 0194 411 φ1 carbide ballDeep groove stylus: 0194 414 SapphireGroove stylus: 0194 417 Sapphire

Combination of detector [E-DT-LJ-R603] and styli to the left

Detector/stylus set

E-DT-R93ACombination of detector [E-DT-R60A] and styli to the left

E-DT-R101ACombination of detector [E-DT-R67A] and styli to the left

標準在庫品


深溝 0194 414RO.25mm，55° 円錐サファイア L型 L＝10mm10

10

6.5

3.4

20

2

コーナー 0194 415RO.25mm，55° 円錐サファイア L型 L＝3.4mm/60°

溝 0194 416RO.25mm，55° 円錐サファイア T型 L＝6.5mm

溝 0194 417RO.25mm，55° 円錐サファイア T型 L＝10mm

深溝 0194 418RO.25mm，55° 円錐サファイア T型 L＝20mm

極小穴 0194 419φ0.5mmスチールボール

カッタマーク除去 0194 420RO.25mm，サファイア L型 L＝4.8mm/R15mm

測定子（汎用）度感1:22344910φ1.6mm 超硬ボール

68.46± 0.1

1.5

53

75.7

(69.2)6.5

0194432-01 0901702-0φ3

φ5

φ1.

2

1/16"carbide ball

(16.2)

1

汎用 EM49401-S313 2:1感度 φ2mmルビーボール

68.46

1.5

51.56.5

φ3

φ5

φ1.

6 φ2ruby ball

(14.75)

バルブ穴用 EM49401-S315 2:1感度 60° 傾斜、RO.25mm, 55° 円錐サファイアオフセット2.175mm

68.2

φ3

φ5

6.51.5

47.3 （19.4）

φ1.

2

φ3

Refer to detail drawing

φ1.2 60° 2.17

Tip detail drawing


E-DT-R03B汎用測定子 0194 410φ3.2超硬ボール


深溝測定子 0194 414サファイア L型 L＝10mm

溝測定子 0194 417サファイア T型 L＝10mm

検出器 E-DT-LJ-R603と左記測定子の組合わせ

17

10

10

E-DT-R93A 検出器 E-DT-R60Aと左記測定子の組合わせ

E-DT-R101A検出器 E-DT-R67Aと左記測定子の

組合わせ

4.8

標準在庫品



10

6.5

3.4

20

2








68.46± 0.1

1.5

53

75.7

(69.2)6.5

0194432-01 0901702-0φ3

φ5

φ1.

2

1/16"carbide ball

(16.2)

1


68.46

1.5

51.56.5

φ3

φ5

φ1.

6 φ2ruby ball

(14.75)


68.2

φ3

φ5

6.51.5

47.3 （19.4）

φ1.

2

φ3


φ1.2 60° 2.17

Tip detail drawing







17

10

10



組合わせ

4.8

標準在庫品



10

6.5

3.4

20

2








68.46± 0.1

1.5

53

75.7

(69.2)6.5

0194432-01 0901702-0φ3

φ5

φ1.

2

1/16"carbide ball

(16.2)

1


68.46

1.5

51.56.5

φ3

φ5

φ1.

6 φ2ruby ball

(14.75)


68.2

φ3

φ5

6.51.5

47.3 （19.4）

φ1.

2

φ3


φ1.2 60° 2.17

Tip detail drawing







17

10

10



組合わせ

4.8

標準在庫品



10

6.5

3.4

20

2








68.46± 0.1

1.5

53

75.7

(69.2)6.5

0194432-01 0901702-0φ3

φ5

φ1.

2

1/16"carbide ball

(16.2)

1


68.46

1.5

51.56.5

φ3

φ5

φ1.

6 φ2ruby ball

(14.75)


68.2

φ3

φ5

6.51.5

47.3 （19.4）

φ1.

2

φ3


φ1.2 60° 2.17

Tip detail drawing







17

10

10



組合わせ

4.8

標準在庫品



10

6.5

3.4

20

2








68.46± 0.1

1.5

53

75.7

(69.2)6.5

0194432-01 0901702-0φ3

φ5

φ1.

2

1/16"carbide ball

(16.2)

1


68.46

1.5

51.56.5

φ3

φ5

φ1.

6 φ2ruby ball

(14.75)


68.2

φ3

φ5

6.51.5

47.3 （19.4）

φ1.

2

φ3


φ1.2 60° 2.17

Tip detail drawing







17

10

10



組合わせ

4.8

標準在庫品



10

6.5

3.4

20

2








68.46± 0.1

1.5

53

75.7

(69.2)6.5

0194432-01 0901702-0φ3

φ5

φ1.

2

1/16"carbide ball

(16.2)

1


68.46

1.5

51.56.5

φ3

φ5

φ1.

6 φ2ruby ball

(14.75)


68.2

φ3

φ5

6.51.5

47.3 （19.4）

φ1.

2

φ3


φ1.2 60° 2.17

Tip detail drawing







17

10

10



組合わせ

4.8

標準在庫品



10

6.5

3.4

20

2








68.46± 0.1

1.5

53

75.7

(69.2)6.5

0194432-01 0901702-0φ3

φ5

φ1.

2

1/16"carbide ball

(16.2)

1


68.46

1.5

51.56.5

φ3

φ5

φ1.

6 φ2ruby ball

(14.75)


68.2

φ3

φ5

6.51.5

47.3 （19.4）

φ1.

2

φ3


φ1.2 60° 2.17

Tip detail drawing







17

10

10



組合わせ

4.8

標準在庫品



10

6.5

3.4

20

2








68.46± 0.1

1.5

53

75.7

(69.2)6.5

0194432-01 0901702-0φ3

φ5

φ1.

2

1/16"carbide ball

(16.2)

1


68.46

1.5

51.56.5

φ3

φ5

φ1.

6 φ2ruby ball

(14.75)


68.2

φ3

φ5

6.51.5

47.3 （19.4）

φ1.

2

φ3


φ1.2 60° 2.17

Tip detail drawing







17

10

10



組合わせ

4.8

標準在庫品



10

6.5

3.4

20

2








68.46± 0.1

1.5

53

75.7

(69.2)6.5

0194432-01 0901702-0φ3

φ5

φ1.

2

1/16"carbide ball

(16.2)

1


68.46

1.5

51.56.5

φ3

φ5

φ1.

6 φ2ruby ball

(14.75)


68.2

φ3

φ5

6.51.5

47.3 （19.4）

φ1.

2

φ3


φ1.2 60° 2.17

Tip detail drawing







17

10

10



組合わせ

4.8

標準在庫品



10

6.5

3.4

20

2








68.46± 0.1

1.5

53

75.7

(69.2)6.5

0194432-01 0901702-0φ3

φ5

φ1.

2

1/16"carbide ball

(16.2)

1


68.46

1.5

51.56.5

φ3

φ5

φ1.

6 φ2ruby ball

(14.75)


68.2

φ3

φ5

6.51.5

47.3 （19.4）

φ1.

2

φ3


φ1.2 60° 2.17

Tip detail drawing







17

10

10



組合わせ

4.8

標準在庫品



10

6.5

3.4

20

2








68.46± 0.1

1.5

53

75.7

(69.2)6.5

0194432-01 0901702-0φ3

φ5

φ1.

2

1/16"carbide ball

(16.2)

1


68.46

1.5

51.56.5

φ3

φ5

φ1.

6 φ2ruby ball

(14.75)


68.2

φ3

φ5

6.51.5

47.3 （19.4）

φ1.

2

φ3


φ1.2 60° 2.17

Tip detail drawing







17

10

10



組合わせ

4.8


58





E-DT-PA-101

Measuring range: ±500 μmMeasuring force: 170 mN(when arm a is used)Front adjustment mechanismID/OD switch function(For stylus arm a)

Applicable model: Standard accessory for R71CComponents:Stylus Arm a, L= 76 mm, 60° conical sapphire x 1 pcStylus Arm b, L= 201 mm, 60° conical sapphire x 1 pcCombination with holder [E-DH-R288A]

E-DT-PA-102（E-DT-PA-103）

Measuring range: ±500 μmMeasuring force: 130 mN(when stylus arm a is used)Front adjustment mechanismID/OD switch function(For stylus arm a)

Applicable models: Option for R72A, Standard accessory for R76AComponents:Stylus Arm a, L= 76 mm, 60° conical sapphire x 1 pcStylus Arm b, L= 201 mm, 60° conical sapphire x 1 pc(E-DT-PA-103 includes link connector)Combination with holder [E-DH-R288A]

Detector E-DT-R94A

Measuring range: ±500 μmMeasuring force: 130 mN(when stylus arm a is used)Front adjustment mechanismID/OD switch function(For stylus arm a)

Applicable models: Option for R72A, R76AComponents:E-DT-PA102 and holder [E-DT-R288A] setStylus Arm a, L= 75 mm, 60° conical sapphire x 1 pcStylus Arm b, L= 200 mm, 60° conical sapphire x 1 pc

Stylus kit E-DA-R205A

Kit contents

Stylus arm

Stylus arm a M-1014A-0001With R0.25 mm sapphire stylus [010 1080]

Stylus arm b M-1014B-0002With R0.25 mm sapphire stylus [010 1080]

Stylus arm φ4

M-1014C-0003

Replaceablestylus arm

M-1014D-0004

Components of arms

Pipe M-1014A-0505 φ6 × φ180 mm

HolderM-1014A-0501 Detector side

M-1014A-0502 Stylus side

Stylus

0101 093 R0.25 mm sapphire stylus, L= 5.5 mm



0101 081 R0.25 mm sapphire stylus, L= 10 mm

0101 083 R0.25 mm sapphire stylus, L= 20 mm

0101 089 R0.25 mm sapphire stylus, L= 30 mm (one side)

Stylus arm φ 4 [M-1014C-0003] x 1 pcReplaceable stylus arm [M-1014D-0004] x 1 pcStylus [0194412] x 1 pcPipe for manufacturing special arm [M-1014A-0505] x 5 pcHolder on detector side [M-1014A-0501] x 5 pcHolder on stylus side [M-1014A-0502] x 5 pcSpecial holder [M-1017H-0401] x 5 pc

Stylus (both sides) [0101 079] x 5 pcStylus (both sides) [0101 080] x 5 pcStylus (both sides) [0101 081] x 5 pcStylus (both sides) [0101 083] x 5 pcStylus (one side) [0101 089] x 5 pcPipe bender [364-FHM6] x 1 pcCutting machine [127-FB] x 1 pcAdhesive x 1 pcCarrying case provided

標準在庫品


汎用検出器 E-DT-PA-101

測定範囲 ±500μm測定力 170mN（スタイラスアームa使用時）フロント調整機構付き内外径切替機能付き（スタイラスアームaの場合）

適用機種：R71Cに標準付属構成品：スタイラスアーム a L＝76mm 60° 円錐サファイア 1個スタイラスアーム b L＝201mm 60° 円錐サファイア 1個

7.5

Zero adjust knob

Measuring directionswitch knob

Stylus

Tipφ6

L25

検出器


アーム構成部品

E-DT-R94A

測定範囲 ±500μm測定力 130mN(スタイラスアームa使用時)フロント調整機構付き内外径切替機能付き(スタイラスアームaの場合)

構成品：E-DT-PA102とホルダE-DT-R288Aのセット

12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)

ID/OD measuring switch knob

汎用検出器 E-DT-PA-102（E-DT-PA-103）


適用機種：R72Aにオプション、R76Aに標準付属構成品：スタイラスアーム a L＝76mm 60° 円錐サファイア 1個スタイラスアーム b L＝201mm 60° 円錐サファイア 1個

スタイラスアーム a L＝75mm 60° 円錐サファイア 1個スタイラスアーム b L＝200mm 60° 円錐サファイア 1個

（E-DT-PA-103は中継コネクタ付き）

スタイラスアーム a M-1014A-0001 RO.25mm サファイアスタイラス 010 1080 付76.3

201.5

76.3

52.2

スタイラスアーム b M-1014B-0002 RO.25mm サファイアスタイラス 010 1080 付

スタイラスアーム φ4 M-1014C-0003

差替式スタイラスアーム M-1014D-0004

パイプ M-1014A-0505 φ6×180mm

ホルダ M-1014A-0501 検出器側

ホルダ M-1014A-0502 スタイラス側

スタイラス 0101 093 RO.25mm サファイアスタイラス L＝5.5mm



スタイラス 0101 081 RO.25mm サファイアスタイラス L＝10mm


スタイラス 0101 089 RO.25mm サファイアスタイラス L＝30mm （片測）

スタイラスキット E-DA-R205A

スタイラスアーム φ4 M-1014C-0003 1本差替式スタイラスアーム M-1014D-0004 1本測定子 0194412 1本特殊アーム製作用パイプ M-1014A-0505 5本検出器側ホルダ M-1014A-0501 5本スタイラス側ホルダ M-1014A-0502 5本特殊ホルダ M-1017H-0401 5個

キット付属品スタイラス(両側) 0101 079 5個スタイラス(両側) 0101 080 5個スタイラス(両側) 0101 081 5個スタイラス(両側) 0101 083 5個スタイラス(片側) 0101 089 5個パイプ曲げ器 364-FHM6 1個切断器 127-FB 1個

個1剤着接格納箱入り

適用機種：R72A、R76Aにオプション

標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm














標準在庫品





7.5

Zero adjust knob


Stylus

Tipφ6

L25

検出器



E-DT-R94A



12030

φ6

7.5 Stylus arm

3838

27St

ylus

arm

leng

th

Zero adjust knob

O.D I.D

PA detector holder

PA detector (102)








201.5

76.3

52.2




パイプ M-1014A-0505 φ6×180mm















Op

tio

ns

59


Splinemeasurementattachment

E-DA-R203A For notched surface

E-DH-R225AMeasuring length: 355 mmMax. magnification: 2000xFilter: 15, 50 peaks/rotation

Options for R71C Components: Shaft mount x 1 pcShaft A x 1 pcShaft B x 1 pcHolder A x 1 pcHolder B x 1 pcHolder C x 1 pc

(Either detector or stylus not included.)

Long shaftmeasuring tool

E-DH-R403AMeasuring length: 600 mmMax. magnification: 2000xFilter: 50 peaks/rotation

Options for R71CComponents: Shaft mount x 1 pcShaft A x 1 pcShaft B x 1 pcHolder A x 1 pc


E-DH-R413BMeasuring length: 600 mmMax. magnification: 2000xFilter: 15, 50 peaks/rotation

Options for R72AComponents: Shaft mount x 1 pcShaft A x 1 pcShaft B x 1 pcHolder A x 1 pcHolder C x 1 pcHolder: F1 x 1 pcHolder: F2 x 1 pc


標準在庫品


スプライン測定用アタッチメント E-DA-R203A 切欠面用

Detector

1056

Tip（Stylus）


長軸測定具 E-DH-R225A測定長さ 355mm対応測定最高倍率 2,000倍使用フィルタ 15, 50山/回転

構成品 R71C用オプション

（検出器、先端子は含みません）



シャフト取付部 1個シャフトA 1個シャフトB 1個ホルダA 1個ホルダB 1個ホルダC 1個

φ30

114 7442

9

114

42.4

145

114

103

22

103

114

367 33

6

32

X feed knob

Holder A

Holder C

Shaft A

Holder B

Shaft B

Shaft support tool

φ28

φ38

φ28

14

長軸測定具 E-DH-R403A測定長さ 600mm対応測定最高倍率 2,000倍使用フィルタ 50山/回転

構成品 R71C用オプションシャフト取付部 1個シャフトA 1個シャフトB 1個ホルダA 1個

722

φ22

Optional probe

0194410（1/8° pole）

長軸測定具 E-DH-R413B測定長さ 600mm 対応測定最高倍率 2,000倍使用フィルタ 15, 50山/回転

構成品 R72A用オプションシャフト取付部 1個シャフトA 1個シャフトB 1個ホルダA 1個ホルダC 1個ホルダF1 1個ホルダF2 1個

DetectorTip(0194412,Sensitivity1:1)


Holder F1

Holder F2

R108

R108

120

φ22

φ90

620

120

Shaft B

Shaft A

Holder C

Holder A

Holder A

(24.

1)

(158.2)

標準在庫品



Detector

1056

Tip（Stylus）








φ30

114 7442

9

114

42.4

145

114

103

22

103

114

367 33

6

32

X feed knob

Holder A

Holder C

Shaft A

Holder B

Shaft B

Shaft support tool

φ28

φ38

φ28

14



722

φ22

Optional probe

0194410（1/8° pole）





Holder F1

Holder F2

R108

R108

120

φ22

φ90

620

120

Shaft B

Shaft A

Holder C

Holder A

Holder A

(24.

1)

(158.2)

標準在庫品



Detector

1056

Tip（Stylus）








φ30

114 7442

9

114

42.4

145

114

103

22

103

114

367 33

6

32

X feed knob

Holder A

Holder C

Shaft A

Holder B

Shaft B

Shaft support tool

φ28

φ38

φ28

14



722

φ22

Optional probe

0194410（1/8° pole）





Holder F1

Holder F2

R108

R108

120

φ22

φ90

620

120

Shaft B

Shaft A

Holder C

Holder A

Holder A

(24.

1)

(158.2)

標準在庫品



Detector

10

56

Tip（Stylus）








φ30

114 7442

9

114

42.4

145

114

103

22

103

114

367 33

6

32

X feed knob

Holder A

Holder C

Shaft A

Holder B

Shaft B

Shaft support tool

φ28

φ38

φ28

14



722

φ22

Optional probe

0194410（1/8° pole）





Holder F1

Holder F2

R108

R108

120

φ22

φ90

620

120

Shaft B

Shaft A

Holder C

Holder A

Holder A

(24.

1)

(158.2)


60




Long shaftmeasuring tool

E-DH-R289B Measuring length: 700 mmMax. magnification: 2000xFilter: 15, 50 peaks/rotation

Options for R76AComponents:Shaft mount x 1 pcShaft A x 1 pcShaft B x 1 pcHolder A x 1 pcHolder C x 1 pcHolder: F1 x 1 pcHolder: F2 x 1 pc


Thin detector

E-DT-R71ADetection range: ±200 μmMeasuring force: 15 mNFront travel: 500 μm to 700 μm

Cam holelong shaftmeasuring tool

E-DT-R68A

Max. magnification: 1000xFilter: 15, 50 peaks/rotationDetection range: ±200 μmMin. measuring diameter: φ27 mm

Shaft diameter: φ20 mm

Option for R72A, R76AComponentsThin detector (E-DT-R71A) x 1 pcE-DT-R68A: Measuring depth: 600 mm max. With stylus [EM47038]E-DT-R48A: Measuring depth: 455 mm max. With stylus [EM47038]E-DT-R126A: Measuring depth: 700 mm max. With stylus [EM47051]

E-DT-R48A

E-DT-R126A

E-DT-R143A

Max. magnification: 1000xFilter: 15, 50 peaks/rotationDetection range: ±200 μmMin. measuring diameter: φ20 mmShaft diameter: φ16 mm (carbon)

Option for R72A, R76AComponents:Thin detector (E-DT-R146A) x 1 pcE-DT-R143A: Measuring depth: 600 mm max. With stylus [EM47051]E-DT-R157A: Measuring depth: 400 mm max. With stylus [EM47051]E-DT-R157A

標準在庫品


長軸測定具 E-DH-R289B 測定長さ 700mm 対応測定最高倍率 2,000倍使用フィルタ 15, 50山/回転

R76A用オプション構成品シャフト取付部 1個シャフトA 1個シャフトB 1個ホルダA 1個ホルダC 1個ホルダF1 1個ホルダF2 1個


Detector Tip(0194432,Sensitivity2:1)

Holder F1

Holder F2

R108

R108

120

φ22

φ90

710

120

Shaft B

Shaft A

Holder C

Holder A

Holder A

(24.

1)

(158.2)

薄型検出器 E-DT-R71A検出範囲 ±200µm測定力 15mNフロントトラベル 500～700µm

Stylus EM-47038-S002

20

7.468

19

�Option

E-DT-R48A

E-DT-R126A

E-DT-R157A

カム穴用長軸測定具

E-DT-R68A

測定最高倍率 1,000倍使用フィルタ 15, 50山/回転検出範囲 ±200µm最小測定径 φ27mm

R72A, R76A用オプション構成品薄型検出器(E-DT-R71A) 1個シャフト径φ20mmE-DT-R68A：測定深さ Max600mm、

測定子EM47038付E-DT-R48A：測定深さ Max455mm、


測定子EM47051付

70

110

(φ23)

φ20

1.5

Detector

Max

. mes

urin

g d

epth

Stylus

3.7


E-DT-R143A


R72A, R76A用オプション構成品薄型検出器(E-DT-R146A) 1個シャフト径φ16mm（カーボン）E-DT-R143A：測定深さ Max600mm、

測定子付EM47051E-DT-R157A：測定深さ Max400mm、

測定子付EM47051

70

110

(φ20)

φ16

1.5

Detector

Max

. mes

urin

g d

epth

Stylus

3.7


標準在庫品






Holder F1

Holder F2

R108

R108

120

φ22

φ90

710

120

Shaft B

Shaft A

Holder C

Holder A

Holder A

(24.

1)

(158.2)



20

7.468

19

�Option

E-DT-R48A

E-DT-R126A

E-DT-R157A


E-DT-R68A





測定子EM47051付

70

110

(φ23)

φ20

1.5

Detector

Max

. mes

urin

g d

epth

Stylus

3.7


E-DT-R143A




測定子付EM47051

70

110

(φ20)

φ16

1.5

Detector

Max

. mes

urin

g d

epth

Stylus

3.7


標準在庫品






Holder F1

Holder F2

R108

R108

120

φ22

φ90

710

120

Shaft B

Shaft A

Holder C

Holder A

Holder A

(24.

1)

(158.2)



20

7.468

19

�Option

E-DT-R48A

E-DT-R126A

E-DT-R157A


E-DT-R68A





測定子EM47051付

70

110

(φ23)

φ20

1.5

Detector

Max

. mes

urin

g d

epth

Stylus

3.7


E-DT-R143A




測定子付EM47051

70

110

(φ20)

φ16

1.5

Detector

Max

. mes

urin

g d

epth

Stylus

3.7


標準在庫品






Holder F1

Holder F2

R108

R108

120

φ22

φ90

710

120

Shaft B

Shaft A

Holder C

Holder A

Holder A

(24.

1)

(158.2)



20

7.468

19

�Option

E-DT-R48A

E-DT-R126A

E-DT-R157A


E-DT-R68A





測定子EM47051付

70

110

(φ23)

φ20

1.5

Detector

Max

. mes

urin

g d

epth

Stylus

3.7


E-DT-R143A




測定子付EM47051

70

110

(φ20)

φ16

1.5

Detector

Max

. mes

urin

g d

epth

Stylus

3.7



Op

tio

ns

61


Detectorholder forcrankshafts

E-DH-R473A

For diameter φ22 long shaft measuring toolE-DT-R473A: R=110 mm, R1＝130 mmE-DH-R467A: R=130 mm, R1＝156 mmE-DH-R410A: R=145 mm, R1＝162 mm

E-DH-R467A

Max. magnification: 2000xFilter: 15, 50 peaks/rotationUp/down speed: 15 mm/s or less

E-DH-R410A

E-DH-R480A

Applicable model: R71CFor diameter φ28 long shaft measuring toolE-DT-R480A：R＝ 110 mm, R1＝ 130 mmE-DH-R459A：R＝ 130 mm, R1＝ 156 mmE-DH-R449A：R＝ 145 mm, R1＝ 162 mm

E-DH-R459A

Max. magnification: 2000xFilter: 15, 50 peaks/rotationUp/down speed: 15 mm/s or less

E-DH-R449A

Stylus

EM47051

φ2 mm, Carbide ballOverhang: 3.5 mmSpace between holder and workpiece: 1.5 mm

EM47038φ2 mm, Carbide ballOverhang: 5.5 mm


クランク軸用検出器ホルダー

E-DH-R473A

E-DH-R467A

E-DH-R410A

測定最高倍率 2,000倍使用フィルタ 15, 50山/回転上下駆動速度 15mm/s以下

長軸測定具シャフト径φ22用E-DT-R473A： R=110mm, R1＝130mmE-DH-R467A： R=130mm, R1＝156mmE-DH-R410A： R=145mm, R1＝162mm

Cord holder

Fixingknob

4934

.6

4.6

)911(81

137

4.7

R1

R

φ22

Thin detector

Stylus for thindetector


E-DH-R480A

E-DH-R459A

E-DH-R449A


適用機種：R71C、長軸測定具シャフト径φ28用

E-DT-R480A： R＝110mm, R1＝130mmE-DH-R459A： R＝130mm, R1＝156mmE-DH-R449A： R＝145mm, R1＝162mm

Cord holder

Fixingknob

4934.6

4.6

)911(81

137

4.7

R1

R

φ28

Thin detector


測定子 EM47051φ2mm , 超硬ボール出寸法 3.5mm, ホルダとワーク間 1.5mm

40.3

33.5 5.7

90°

6.4

1

1

30°

30°

3.7

Tip φ2 carbide ball

測定子 EM47038 φ2mm , 超硬ボール出寸法 5.5mm

40.3

33.5 5.7

8.4

1

1

30°

30°


φ8

φ2.7



E-MG-R05B真円度 0.05μm材質クロム軸受鋼

適用機種：全機種E-MG-R05Bは木箱付き

Ball ø12.7Protective capø40

ø59

2545

60

E-MG-R01B

倍率校正マスター種機全：種機用適mμ02約面上量差段A82R-CM-E

ø20

Actual leveldifference inscribed

Top View

25

Approx.

Level difference:

20 µm

52 62 5

原点マスターユニット EM78421 適用機種：R72A（CNC機能に付属）、

R76A

Master stage

Bal

l orig

in

table

78°

45°

253.7

214

倍率校正器セット E-MC-R04A最大校正範囲：400μm最小目量：0.2μm質量：17kg


20

90

60

校正器



E-DH-R473A

E-DH-R467A

E-DH-R410A



Cord holder

Fixingknob

4934

.6

4.6

)911(81

137

4.7

R1

R

φ22

Thin detector



E-DH-R480A

E-DH-R459A

E-DH-R449A




Cord holder

Fixingknob

4934.6

4.6

)911(81

137

4.7

R1

R

φ28

Thin detector



40.3

33.5 5.7

90°

6.4

1

1

30°

30°

3.7



40.3

33.5 5.7

8.4

1

1

30°

30°


φ8

φ2.7






ø59

2545

60

E-MG-R01B


ø20


Top View

25

Approx.

Level difference:

20 µm

52 62 5


R76A

Master stage

Bal

l orig

in

table

78°

45°

253.7

214



20

90

60

校正器



E-DH-R473A

E-DH-R467A

E-DH-R410A



Cord holder

Fixingknob

4934

.6

4.6

)911(81

137

4.7

R1

R

φ22

Thin detector



E-DH-R480A

E-DH-R459A

E-DH-R449A




Cord holder

Fixingknob

4934.6

4.6

)911(81

137

4.7

R1

R

φ28

Thin detector



40.3

33.5 5.7

90°

6.4

1

1

30°

30°

3.7



40.3

33.5 5.7

8.4

1

1

30°

30°


φ8

φ2.7






ø59

2545

60

E-MG-R01B


ø20


Top View

25

Approx.

Level difference:

20 µm

52 62 5


R76A

Master stage

Bal

l orig

in

table

78°

45°

253.7

214



20

90

60

校正器



E-DH-R473A

E-DH-R467A

E-DH-R410A



Cord holder

Fixingknob

4934

.6

4.6

)911(81

137

4.7

R1

R

φ22

Thin detector



E-DH-R480A

E-DH-R459A

E-DH-R449A




Cord holder

Fixingknob

4934.6

4.6

)911(81

137

4.7

R1

R

φ28

Thin detector



40.3

33.5 5.7

90°

6.4

1

1

30°

30°

3.7



40.3

33.5 5.7

8.4

1

1

30°

30°


φ8

φ2.7






ø59

2545

60

E-MG-R01B


ø20


Top View

25

Approx.

Level difference:

20 µm

52 62 5


R76A

Master stage

Bal

l orig

in

table

78°

45°

253.7

214



20

90

60

校正器Standard Inventory Parts

62




Master ball

E-MG-R05B

Sphericity: 0.05 μmMaterial: Chrome bearing steel

Applicable models: All modelsE-MG-R05B provided with wooden box.

E-MG-R01B

Magnification

calibration masterE-MC-R28A

Level difference: Top surface approx. 20 μm


Origin master unit EM78421Applicable models: R72A (comes with CNC function)

R76A

Magnification

calibration setE-MC-R04A

Max. calibration range: 400 μmMin. scale interval: 0.2 μmWeight: 17 kg


E-MG-R06A

Cylindericity: 1 μm/150 mmSquareness: 2 μmDimensions: φ 60 mm x φ 150 mm

Cylindrical

squareE-MG-R08A

Cylindericity: 1.3 μm/200 mmSquareness: 2.5 μmDimensions: φ 60 mm x φ 200 mm


E-MG-R83A

Cylindericity: 2 μm/400 mmSquareness: 5 μmDimensions: φ 92 mm x φ 400 mm

Calibrators



E-DH-R473A

E-DH-R467A

E-DH-R410A



Cord holder

Fixingknob

4934

.6

4.6

)911(81

137

4.7

R1

R

φ22

Thin detector



E-DH-R480A

E-DH-R459A

E-DH-R449A




Cord holder

Fixingknob

4934.6

4.6

)911(81

137

4.7

R1

R

φ28

Thin detector



40.3

33.5 5.7

90°

6.4

1

1

30°

30°

3.7



40.3

33.5 5.7

8.4

1

1

30°

30°


φ8

φ2.7






ø5925

4560

E-MG-R01B


ø20


Top View

25

Approx.

Level difference:

20 µm

52 62 5


R76A

Master stage

Bal

l orig

in

table

78°

45°

253.7

214



20

90

60

校正器



E-DH-R473A

E-DH-R467A

E-DH-R410A



Cord holder

Fixingknob

4934

.6

4.6

)911(81

137

4.7

R1

R

φ22

Thin detector



E-DH-R480A

E-DH-R459A

E-DH-R449A




Cord holder

Fixingknob

4934.6

4.6

)911(81

137

4.7

R1

R

φ28

Thin detector



40.3

33.5 5.7

90°

6.4

1

1

30°

30°

3.7



40.3

33.5 5.7

8.4

1

1

30°

30°


φ8

φ2.7






ø59

2545

60E-MG-R01B


ø20


Top View

25

Approx.

Level difference:

20 µm

52 62 5


R76A

Master stage

Bal

l orig

in

table

78°

45°

253.7

214



20

90

60

校正器



E-DH-R473A

E-DH-R467A

E-DH-R410A



Cord holder

Fixingknob

4934

.6

4.6

)911(81

137

4.7

R1

R

φ22

Thin detector



E-DH-R480A

E-DH-R459A

E-DH-R449A




Cord holder

Fixingknob

4934.6

4.6

)911(81

137

4.7

R1

R

φ28

Thin detector



40.3

33.5 5.7

90°

6.4

1

1

30°

30°

3.7



40.3

33.5 5.7

8.4

1

1

30°

30°


φ8

φ2.7






ø59

2545

60

E-MG-R01B


ø20


Top View

25

Approx.

Level difference:

20 µm

52 62 5


R76A

Master stage

Bal

l orig

in

table

78°

45°

253.7

214



20

90

60

校正器



E-DH-R473A

E-DH-R467A

E-DH-R410A



Cord holder

Fixingknob

4934

.6

4.6

)911(81

137

4.7

R1

R

φ22

Thin detector



E-DH-R480A

E-DH-R459A

E-DH-R449A




Cord holder

Fixingknob

4934.6

4.6

)911(81

137

4.7

R1

R

φ28

Thin detector



40.3

33.5 5.7

90°

6.4

1

1

30°

30°

3.7



40.3

33.5 5.7

8.4

1

1

30°

30°


φ8

φ2.7






ø59

2545

60

E-MG-R01B


ø20


Top View

25

Approx.

Level difference:

20 µm

52 62 5


R76A

Master stage

Bal

l orig

in

table

78°

45°

253.7

214



20

90

60

校正器

円筒スコヤ

E-MG-R06A円筒度 1μm/150mm直角度 2μmサイズ 60×150mm


E-MG-R08A円筒度 1.3μm/200mm直角度 2.5μmサイズ φ60×200mm




真直度マスター E-MG-R34A 真直度精度：0.5μm/700mm 適用機種：R72A, R76A

10 （10） 700真直度精度範囲真直度精度範囲

300

81

2030.5


チルトクロステーブル E-AT-R208C

センタリング調整範囲 ±2mmチルチング調整範囲 ±1°積載質量 25kg

723

Ø148

チルチングテーブル E-AT-R237A

チルチング調整範囲 ±2°積載最大径 φ300mm積載質量 20 kg (偏心荷重 15kg/50mm)質量 17 kg

テーブルスぺーサ E-AT-R214A

スペーサ高さ 240mm積載最大径 φ250mm

（φ340mm）積載質量 100kg 質量 30kg

4-M5

370370

130

240240

130

240

スクロールチャック E-WJ-R01C

固定範囲：外径 φ2～79mm：内径 φ20～90mm

外径：φ118mm高さ：41mm質量：1kg


ø61～ø90 ID chuck




ø2～ø36 ID chuck


ø45～ø79 ID chuck 5

45

5

ø65

100

ø118

スクロールチャック E-WJ-R104A

固定範囲：外径φ45～172mm：内径φ80～172mm



35

ø240

82 56

ø100

10 10C

huck

Mo

untingp

lace



ø45～ø77 OD chuck



24

17.3

4-5.5 holes9.5 countersunkDepth:5.5

ø220

ø196

ワーク保持具 E-WJ-R209A チャッキング範囲φ14～160mm チルチングテーブル E-AT-R237Aに取付

標準在庫品


B

øA

調整装置


Op

tio

ns

63


Scroll chuck

E-WJ-R01C

Securing Range: OD: φ2 mm to φ79 mm I D: φ20 mm to φ90 mmOD: φ118 mmHeight: 41 mmWeight: 1 kg


E-WJ-R104A

Securing Range: OD: φ45 mm to φ172 mm I D: φ80 mm to φ172 mmOD: φ240 mmHeight: 82 mmWeight: 14 kg

Tiltingtable

E-AT-R237A

Tilting adjustment range: ±2°Max. loading diameter: φ300 mmLoad: 70 kg(Eccentric load: 20 kg/50 mm)Weight: 17 kg

Workpiecesupport tool

E-WJ-R209AChuck range: φ14 mm to 160 mm

Mounted on E-AT-R237A tilting table

Tilting crosstable

E-AT-R208C

Centering adjustment range: ±2 mmTilting adjustment range: ±1°Load: 25 kgTable diameter: φ148 mmMax. outer diameter: 238.5 mm x 238.5 mmTilting center (height from table surface): 246 mm

Table spacer E-AT-R214A

Spacer height: 240 mmMax. loading diameter: φ250 mm (φ340 mm)Load: 100 kgWeight: 30 kg

Adjustment Devices

円筒スコヤ









300

81

2030.5




723

Ø148






4-M5

370370

130

240240

130

240









ø2～ø36 ID chuck



45

5

ø65

100

ø118





35

ø240

82 56

ø100

10 10C

huck

Mo

untingp

lace






24

17.3


ø220

ø196


標準在庫品


B

øA

調整装置

円筒スコヤ









300

81

2030.5




723

Ø148






4-M5

370370

130

240240

130

240









ø2～ø36 ID chuck



45

5

ø65

100

ø118





35

ø240

82 56

ø100

10 10C

huck

Mo

untingp

lace






24

17.3


ø220

ø196


標準在庫品


B

øA

調整装置

円筒スコヤ









300

81

2030.5




723

Ø148






4-M5

370370

130

240240

130

240









ø2～ø36 ID chuck



45

5

ø65

100

ø118





35

ø240

82 56

ø100

10 10C

huck

Mo

untingp

lace






24

17.3


ø220

ø196


標準在庫品


B

øA

調整装置

円筒スコヤ









300

81

2030.5




723

Ø148






4-M5

370370

130

240240

130

240









ø2～ø36 ID chuck



45

5

ø65

100

ø118





35

ø240

82 56

ø100

10 10C

huck

Mo

untingp

lace






24

17.3


ø220

ø196


標準在庫品


B

øA

調整装置

円筒スコヤ









300

81

2030.5




723

Ø148






4-M5

370370

130

240240

130

240









ø2～ø36 ID chuck



45

5

ø65

100

ø118





35

ø240

82 56

ø100

10 10C

huck

Mo

untingp

lace






24

17.3


ø220

ø196


標準在庫品


B

øA

調整装置

円筒スコヤ

E-MG-R06A

円筒度 1μm/150m

m直角度 2μm

サイズ 60×

150mm


E-MG-R08A

円筒度 1.3μ

m/200m

m直角度 2.5μ

mサイズ φ60×

200mm


E-MG-R83A

円筒度 2μm/400m

m直角度 5μm

サイズ 92×

400mm


真直度マスター

E-MG-R34A

真直度精度：0.5μ

m/700m

m適用機種：R72A, R76A

10（

10） 700

真直度精度範囲


300

81

2030.5

要摘

様仕

図観外

式型

称名チルトクロス

テーブル

E-AT-R208Cセンタリング調整範囲±2mm

チルチング調整範囲±1°

積載質量 25kg

723

Ø148

チルチング

テーブル

E-AT-R237A

チルチング調整範囲 ±2°

積載最大径 φ300m

m積載質量 20 kg

(偏心荷重 15kg/50m

m)

質量 17 kg

テーブルスぺーサ

E-AT-R214A

スペーサ高さ 240m

m積載最大径 φ250m

m（φ340m

m）

積載質量 100kg

質量 30kg

4-M5

370

370

130

240

240

130

240


E-WJ-R01C

固定範囲：外径φ2～79m

m：内径φ20～

90mm

外径：φ118m

m高さ：41m

m質量：1kg


ø61～ø90 ID

chuck

Scro

ll chuckT

op

View

ø40～ø69 ID

chuck

ø20～ø49 ID

chuck

ø2～ø36 ID

chuck

ø25～ø59 ID

chuck

ø45～ø79 ID

chuck

5

45

5

ø65

100

ø118


E-WJ-R104A

固定範囲：外径φ45～

172mm

：内径φ80～

172mm

外径：φ240m

m高さ：82m

m質量：14kg


35

ø240

8256

ø100

1010

Chuck Mounting

place

ø140～

ø172 ID

chuck

ø80～

ø112 ID

chuck

ø45～

ø77 O

D chuck

ø92～ø124 O

D chuck

ø140～ø172 O

D chuck

24

17.3

4-5.5 holes

9.5 countersunk

Dep

th:5.5

ø220

ø196

ワーク保持具

E-WJ-R209A

チャッキング範囲

φ14～

160mm

チルチングテーブルE-AT-R237Aに

取付

標準在庫品

要摘

様仕

図観外

式型

称名

B

øA

調整装置

円筒スコヤ

E-MG-R06A

円筒度 1μm/150m

m直角度 2μm

サイズ 60×

150mm


E-MG-R08A

円筒度 1.3μ

m/200m

m直角度 2.5μ

mサイズ φ60×

200mm


E-MG-R83A

円筒度 2μm/400m

m直角度 5μm

サイズ 92×

400mm


真直度マスター

E-MG-R34A

真直度精度：0.5μ

m/700m

m適用機種：R72A, R76A

10（

10） 700



300

81

2030.5

要摘

様仕

図観外

式型

称名チルトクロス

テーブル

E-AT-R208Cセンタリング調整範囲±2mm

チルチング調整範囲±1°

積載質量 25kg

723

Ø148

チルチング

テーブル

E-AT-R237A

チルチング調整範囲 ±2°

積載最大径 φ300m

m積載質量 20 kg

(偏心荷重 15kg/50m

m)

質量 17 kg

テーブルスぺーサ

E-AT-R214A

スペーサ高さ 240m

m積載最大径 φ250m

m（φ340m

m）

積載質量 100kg

質量 30kg

4-M5

370

370

130

240

240

130

240


E-WJ-R01C

固定範囲：外径φ2～79m

m：内径φ20～

90mm

外径：φ118m

m高さ：41m

m質量：1kg


ø61～ø90 ID

chuck

Scro

ll chuckT

op

View

ø40～ø69 ID

chuck

ø20～ø49 ID

chuck

ø2～ø36 ID

chuck

ø25～ø59 ID

chuck

ø45～ø79 ID

chuck

5

45

5

ø65

100

ø118


E-WJ-R104A

固定範囲：外径φ45～

172mm

：内径φ80～

172mm

外径：φ240m

m高さ：82m

m質量：14kg


35

ø240

8256

ø100

1010

Chuck Mounting

place

ø140～

ø172 ID

chuck

ø80～

ø112 ID

chuck

ø45～

ø77 O

D chuck

ø92～ø124 O

D chuck

ø140～ø172 O

D chuck

24

17.3

4-5.5 holes

9.5 countersunk

Dep

th:5.5

ø220

ø196

ワーク保持具

E-WJ-R209A

チャッキング範囲

φ14～

160mm

チルチングテーブルE-AT-R237Aに

取付

標準在庫品

要摘

様仕

図観外

式型

称名

B

øA

調整装置

430

430130


64




System rack E-DK-S24A

Dimensions: 800 mm (W) x 800 mm (D) x (1070 to 1370) mm (H)Weight: 44.5 kg

Powertransformerbox

E-TF-R25A

Input: 90 V to 240 VOutput: 100 VCapacitance: 2.1 kVADimensions: 300 mm (W) x 350 mm (D) x 296 mm (H)Weight: 45 kg

Please specify input voltage.

Refrigerating type air dryers

L-WF-R10B

Max. flow: 200 ℓ /minPower consumption: 165 W/195 W (50/60 Hz)Weight: 16 kgPower supply: AC 100 V only

Applicable model: R71C

L-WF-R03B

Max. flow: 100 ℓ /minPower consumption: 165 W/195 W (50/60 Hz)Weight: 15 kgPower supply: AC 100 V onlyDimensions: 220 mm (W) x 350 mm (D) x 400 mm (H)

Applicable models: R72A, R73A

L-WF-R27A

Max. flow: 200 ℓ /minPower consumption: 210 W (50/60 Hz)Weight: 27 kgPower supply: AC 200 V to 240 V, separate transformer typeDimensions: 226 mm (W) x 410 mm (D) x 445 mm (H)


L-WF-R24A

Max. flow: 200 ℓ /minPower consumption: 180 W/202 W (50/60 Hz)Weight: 18 kgPower supply: AC 230 V CE markingDimensions: 226 mm (W) x 410 mm (D) x 473 mm (H)


Air purifier set

L-WF-R11A

Install water separator [L-WF-R08A], oil separator [L-WF-R07A] on mounting plateDimensions: 320 mm (W) x 170 mm (D) x 380 mm (H)

Applicable models: All


Filter element 63092 — AFM20P-060AS

Micro filter element 630611 — AFD20P-060AS

Lubricating oil — — — 180 cc

Peripherals

Consumables

標準在庫品


システムラック E-DK-S24A寸法：800 W×800 D×1070～1370 Hmm質量：44.5kg

W

D

670

H

420

電源トランスボックス E-TF-R25A

入力：90V～240V出力：100V容量：2.1KVA

入力電圧をご指定ください。寸法：300 W×350 D×296 Hmm質量：45kg28

016

35016300

冷凍式エアドライヤ

L-WF-R10B

最大流量：200 /min消費電力：165/195W （50/60Hz）質量：16kg

適用機種:R71C電源はAC100V専用

Freezer typeair dryers

328 92

57

232

370 41

0

3/8 elbow union

Polyurethane tube5m(ID 4)

From air intake Rc 3/8

To mesureringinstrument

Micro mist separatorAuto Drain M

Mist separatorAuto Drain M

228

L-WF-R27A

最大流量：200 /min消費電力：210W (50/60Hｚ）質量：27kg

適用機種：全機種（テーブル回転タイプ）寸法：226 W×410 D×445 HmmAC200～240V用トランス別置型

L-WF-R24A

最大流量：200 /min消費電力：180/202W (50/60Hｚ）質量：18kg

適用機種：全機種（テーブル回転タイプ）寸法：226 W×410 D×473 HmmAC230V用CEマーク

空気浄化器セット L-WF-R11A水取器L-WF-R08A油取器L-WF-R07Aを取付板にセット


320

378.

5

To measuringinstrument（PT1/4）

To measuring instrument（1/4）


Residual pressurebleeder valve（1/4）

OUTIN

OUTIN

OUTIN

Polyurethane tubeOD8（3m）

エアベアリングクランパ E-BA-R201A

供給されている空気が遮断されているとき、エアベアリングをクランプして回転を阻止し、保護する装置です。適用機種：R71C

エアーベアリングクランパ

キャリッジ部側面

回転クランパ E-BA-R202A

真直度測定時に検出器の回転を防ぐためのものです。特に精度良く真直度測定を行う場合に用います。適用機種：R71C

回転クランパ

キャリッジ部正面

L-WF-R03B


適用機種 : R72A電源はAC100V専用寸法：220 W×350 D×400 Hmm

Bushing（ 3/8× 1/4）

10m

D

H

W （900）

Hose connection

Toconnection

（ø6 Hose）

Insert connector

Switch with indicator lamp

Drain check window

Power cordPower cord withground plug（L=1800）

（ø6） Drain tube

Air supply port

（ø6, 1/4）

周辺機器

標準在庫品



W

D

670

H

420




016

35016300


L-WF-R10B




328 92

57

232

370 41

0

3/8 elbow union






228

L-WF-R27A



L-WF-R24A





320

378.

5





OUTIN

OUTIN

OUTIN








回転クランパ


L-WF-R03B



Bushing（ 3/8× 1/4）

10m

D

H

W （900）

Hose connection

Toconnection

（ø6 Hose）

Insert connector


Drain check window



Air supply port

（ø6, 1/4）

周辺機器

標準在庫品



W

D

670

H

420




016

35016300


L-WF-R10B




328 92

57

232

370 41

0

3/8 elbow union






228

L-WF-R27A



L-WF-R24A





320

378.

5





OUTIN

OUTIN

OUTIN








回転クランパ


L-WF-R03B



Bushing（ 3/8× 1/4）

10m

D

H

W （900）

Hose connection

Toconnection

（ø6 Hose）

Insert connector


Drain check window



Air supply port

（ø6, 1/4）

周辺機器

標準在庫品



W

D

670

H

420




016

35016300


L-WF-R10B




328 92

57

232

370 41

0

3/8 elbow union






228

L-WF-R27A



L-WF-R24A





320

378.

5





OUTIN

OUTIN

OUTIN








回転クランパ


L-WF-R03B



Bushing（ 3/8× 1/4）

10m

D

H

W （900）

Hose connection

Toconnection

（ø6 Hose）

Insert connector


Drain check window



Air supply port

（ø6, 1/4）

周辺機器

標準在庫品



W

D

670

H

420




016

35016300


L-WF-R10B




328 92

57

232

370 41

0

3/8 elbow union






228

L-WF-R27A



L-WF-R24A





320

378.

5





OUTIN

OUTIN

OUTIN








回転クランパ


L-WF-R03B



Bushing（ 3/8× 1/4）

10m

D

H

W （900）

Hose connection

Toconnection

（ø6 Hose）

Insert connector


Drain check window



Air supply port

（ø6, 1/4）

周辺機器


Op

tio

ns

65

注意：型式、寸法は、R73A（Zストローク 1000mm）の場合です

Measuring and Immeasurable Ranges of Detectors and Holders（Detector Rotating Type RONDCOM 73A）

Standard detectorE-DH-R550A, E-DH-R533A (option)

Long shaft measuring tool and HolderE-DH-R413B (option), E-DH-R534A (option)

Long shaft measuring tool and HolderE-DH-R413B (option), E-DH-R534A (option)

Detector for cam hole measurementE-DT-R260A (option)

PA detector & Stylus arm bE-DT-R259A (option)

PA detector and stylus arm aE-DT-R259A(option)

Measuring range (stroke) : 1000

Measuring range (stroke) : 963U

pp

er s

urfa

ce c

ross

tab

le

Up

per

lim

it o

f ca

rria

ge




Immeasurable range (out of motion range) : 15

Note: Model and dimensions are for R73A (Z stroke: 1000 mm)

Immeasurable range (out of motion range) : 88Measuring range (stroke) : 1000

66


Roundness parameter

Roundness Measurement and Associated Filters

Detector-Rotating Ttpe

Rectilinear measurement(open) generatrix contours

Rectilinear

Rectilinear

Record graphic

Ro

un

dn

ess

par

amet

er

67

Detector-Rotating Ttpe

Rectilinear measurement(open) generatrix contours

Rectilinear

Rectilinear

Record graphic

and

Eccentricity correction

Rectilinear

Rectilinear motion

Instrument Type:Detector-Rotating

Measured diameter

Rotation

68

Straightness

Flatness


Roundness parameter

Geometrical Tolerance/Deviation and Datum

Ro

un

dn

ess

par

amet

er

69

Reference/Datum Calculation

70

MZCI/LSCI

Note： Perpendicular measurement to axial direction.　　　 The cutoff value is critical.


Roundness parameter

Measurement of Geometrical Deviation with a Roundness Measurement Instrument

Ro

un

dn

ess

par

amet

er

71

(option)

Note that straightness of a generatrix producedby rectilinear measurement indicates only that ofthe specified generatrix orientation.

72

Rectilinear motion

rectilinear


Roundness parameter

Advanced Analysis Using a Roundness Measurement Instrument

Ro

un

dn

ess

par

amet

er

73

Outside shape Inside shape




P V VＰ

P VＰ V

P-P ＶＰＰ

ＶＰP-P

MZCI, LSCI

LSCI LSCI

MZLI, LSLI

LSLI LSLI

Memo


http://www.accretech.jp/

•We reserve the right to change the contents of this catalog, including product specifications, without notice when products are updated.

B-84-641-E-1305

■ Head Office2968-2, Ishikawa-machi, Hachioji-city,Tokyo 192-0032, JapanTEL: 81(42)642-1701 　　FAX: 81(42)642-1821

■ International Sales and Marketing4, Higashi-Nakanuki-machi,Tsuchiura-city, Ibaraki 300-0006, JapanTEL: 81(29)831-1240 　　FAX: 81(29)831-1461

■Germany / Accretech (Europe) GmbH (Head Office)Landsberger Str. 396, D-81241 Munich, GermanyTEL: 49 (89) 546788-0 　　FAX: 49 (89) 546788-10

■China / Accretech (China) Co., Ltd. (Head Office / Shanghai)Room 2101C, No 1077, Zuchongzhi Road, Pudong New Area, Shanghai, China, 201203TEL: 86(21)3887-0801 　　FAX: 86(21)3887-0805

■ Korea / Accretech Korea Co., Ltd. (Head Office / Seongnam)3F, Fine Venture Bldg., 345-1 Yatap-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-828, KoreaTEL: 82(31)786-4000 　　FAX: 82(31)786-4090

(Korea / Ulsan Office)2015 2F Jinjang Deplex 285-3 Jinjang-dong, Buk-gu, Ulsan, KoreaTEL: 82(52)268-2136 　　FAX: 82(52)268-2137

■ Thailand / Tokyo Seimitsu (Thailand) Co., Ltd. (HQ & Metrology)2/3 Moo 14, Bangna Towers B 1st floor, Bangna-Trad Rd., K.M. 6.5, Bangkaew, Bangplee, Samutprakarn 10540 ThailandTEL: 66(2751)9573, 9574 　　FAX: 66(2751)9575

■ Vietnam / TOKYO SEIMITSU CO., LTD. (HANOI REPRESENTATIVE OFFICE)8F, Office Building, No.85 Nguyen Du Street, Nguyen Du Ward, Hai Ba Trung District, Hanoi, VietnamTEL: 84(43)941-3309 　　FAX: 84(43)941-3310

■ Indonesia / TOKYO SEIMITSU CO., LTD. (INDONESIA REPRESENTATIVE OFFICE)Ruko Thamrin Block F4, 3rd Floor Jl. M.H. Thamrin, Lippo Cikarang, Bekasi, 17550 Indonesia TEL: 62 (0)21 8990 2863 　　FAX: 62 (0)21 8990 2864

Some of our products shall be controlled by the Foreign Exchange and Foreign Trade Act, and required an export license by the Japanese Government.Regarding exporting the products and/or providing a non-resident with technologies, please consult Tokyo Seimitsu.

•ISO 9001 and ISO14001 awarded to the Hachioji and Tsuchiura Plants

Date post:	18-Oct-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Roundness Cylindrical Profile Measuring...

Documents