IC BMM Weston Limited Brent Hill, Faversham, Kent, ME13 7EB Tel: +44 (0)1795 533441 - Fax: +44 (0) 1795 538891 Email: [email protected] - www.bmmweston.com S4 1070 - 2320 litre Pit mounted Horizontal Door Large Capacity S5 1660 - 2870 litre Pit mounted Horizontal Door Large Capacity S3 550 - 1500 litre 6 - 21 STU Horizontal Door Large Capacity S2 370 - 870 litre 4 - 12 STU Vertcal Door Compact unit S1 180 - 340 litre 1 - 2 STU Vertcal Door Compact unit Also in the range: BMM Weston Limited reserves the right to make any modificaton as it sees fit to improve its products without prior notce S2 Technical Data: S2-01/2016 width height Front view Single ended plan view length Pass-through plan view length Sterilizer Model No. P210 P215 P221 P228 P232 P210D P215D P221D P228D STU Capacity (600 x 300 x 300mm) 4 6 8 10 12 6 8 10 12 Volume (Litres) 370 485 600 715 830 480 610 740 870 Chamber size (w x h x d mm) 660 x 700 x 800 660 x 700 x 1050 660 x 700 x 1300 660 x 700 x 1550 660 x 700 x 1800 660 x 700 x 1045 660 x 700 x 1325 660 x 700 x 1605 660 x 700 x 1885 Horizontal sliding door Single Ended Pass through (double door) Barrier seal available Integral steam generator available Overall width & height (mm) 1200 x 1905 1200 x 1905 1200 x 1905 1200 x 1905 1200 x 1905 1200 x 1905 1200 x 1905 1200 x 1905 1200 x 1905 Overall length (mm) 1450 1700 1950 2200 2450 1415 1695 1975 2255
Transcript
IC
BMM Weston LimitedBrent Hill, Faversham, Kent, ME13 7EB
● High Performance● Mid - capacity● Narrow width design● Auto vertical sliding door● Chamber litres: 370 - 870● STU Capacity: 4 - 12
Mid-capacity | Chamber volume 370-870 litre | Vertical sliding door
The BMM Weston Series 2 is our best selling sterilizer worldwide; compact yetversatile, the Series 2 is designed for your demanding department.With chamber capacities ranging from 370 to 870 litres, the Series 2 offers everything youneed together with simplicity of operation and intuitive control. Combining functionality withhigh specification and premium UK engineering synonymous with BMM Weston, the Series 2is the number one choice for today’s demanding environment.
Available in both Single ended and pass-through (2 Door)
Application and programs
● Instruments, textiles, rubbers and tubes
● Operating programs at 121oC and 134oC
● Bowie & dick, leak rate test, helix test
● Self-diagnostic leak test
● Factory programmed to EN285
● Cycles can be configured from a series of discrete stages.
Allowing the integral steam generator and theautoclave jacket into economy mode when thesterilizer has been left dormant, the controllingpressures of both chambers will automatically belowered thereby demanding less energy.
As with all BMM Westonsterilizers – quality is at the heart of what we do;UK Manufacturing is ourstrength and ensures thehighest level of quality.Operating to ISO 13485 &ISO 9001 BMM Westonsterilizers are fullycompliant.
UKManufacturer
For installations with temperature sensitive drains, an optional drain cooling systemcan be added providing a flow of cold water into the drain discharge pipe work. The system is variable and the volume of cold water can be adjusted to gain therequired temperature at exit of between 60 - 80oC
cooldrain
Savings when water matters!
BMM Weston offer various levels of water saving to support thedemanding economic requirements.
aquasave
aquasave1 - based upon previous S2 configurationsaquasave2 - addition of water recovery tankaquasave3 - chilled water loop system required
