Lasec® offers SANS 347 approved autoclaves for your sterilisation and biological decontamination requirements. The range includes basic options through to more advanced options with microprocessor controllers and programming capabilities.
WHAT DOES SANS 347 VERIFICATION ENTAIL?
SANS 347 APPROVED
Contact your local Lasec office for options available in stock.Is your autoclave compliant? Contact us for more information. E&OE.
SANS 347 APPROVED AUTOCLAVES
1 Lasec® Engineers perform the following tests onsite• Pressure test• Safety valve validation• External and internal visual inspection• Sterilisation cycle run
Tests are observed by a third-party authorised inspection authority (AIA) representative
AIA stamps new nameplate which is then fixed on the autoclave
• Name plate includes autoclave details including certification code and SANS 347 Hazard Category
AIA provides an inspection report with results and includes the next inspection date
Autoclave declared safe for use
2
3
4
5
LASEC® AUTOCLAVES
+27 21 531 7504 [email protected] www.lasec.com