SANY ROUGH-TERRAIN CRANE

SRC 350

Technical parameters

Chassis

Superstructure

P1

P3

P2

ULTRA- LONG BOOM. STRONG LIFTING CAPACITY

Load chart

Working ranges

P5

P4

Product specifi cations

Product specifi cations

Frame

Overall welded dual-girder structure, made of high

strength steel plate.

Electrical system

24V system voltage, CAN bus.

Outrigger

H-shaped arrangement, full-hydraulic control, and

all outriggers are capable of separate action; quickly

removable outrigger plate.

Axle

Steering driving axle.

Suspension

Rigid connection of front axle, rear axle locked by pilot

suspension oil cylinder.

Engine

American Cummins engine QSB6.7 Tier 3: rated power

of 119kW at the speed of 2500rpm.

Fuel tank: 300L .

Brake

Dual loop all-hydraulic travelling brake, and parking

brake through input flange of front axle.

Transmission system

The electric control hydro-mechanical transmission

box is used.

Wheel and tire

4 wheels with 4 tires in the specification of 20.5R25VLT.

Hydraulic system

Fixed gear pump is used to control the extension of

level outrigger and vertical outrigger.

Steering

Adopting the all-hydraulic power steering system

which is capable of steering.

01

SPECIFICATIONS/CHASSIS

Counterweight

4T, suspended installation, fixed on the

turntable with bolt.

Operator's cab

It is arranged on one side of the turntable, and the overall

structure is made of corrosion resistant steel plate, the

sliding door design and large area inlaid type safety glass

are adopted, providing a wide field of vision; using the

ergonomic design, it is equipped with full-covered soft

inner decoration, with adjustable seat, which enables the

operator to work in a comfortable and easy way.

Main boom

Synchronous telescoping lifting boom in hexagonal

section; the telescoping mechanism consists of a single

cylinder and rope guide, and the balance valve is installed

on the cylinder.

Main winch

Fixed piston motor and hydraulic brake system are

equipped with balance valves; the max. single-rope

rate is 140m/min and the steel rope is 165m long.

SPECIFICATIONS

SUPERSTRUCTURE

Hydraulic system

The axial piston variable pump under constant power

control of loaded sensory control plus constant power

control is used, capable of adjusting rate scale and

power adaptation, and it may automatically adjust the oil

pump reasonably according to the load conditions, thus

utilizing power in a reasonable way. Not only does the rate

control not depend on throttling, but also energy waste is

reduced.

LuffingDeadweight dropping amplitude control.

Slew

The slewing system consisting of fixed piston motor

and decelerator features a max. rotating speed of 2.7r/

min.

Aux. winch

Fixed piston motor and hydraulic brake system are

equipped with balance valves; the max. single-rope

rate is 140m/min and the steel rope is 135m long.

02

Safety devices

Color LCD displays the parameters, including torque

percentage, load of lift hook, rated load, arm length,

angle, and lifting height, etc., in a centralized way; the

setup of built-in load list and operation parameters of

the system is under safety restriction and protection.

SANY TRUCk CRANE SRC350

TECHNICAL PARAMETERS

03

ax. traveling speed

Turning radius in. turning radius (2/4)

in. ground clearance

Approach angle

Departure angle

ax. gradeability

ax. rated lifting capacity

in. rated amplitude

ax. lifting torque

Span of outrigger (transverse longitudinal)

ib offset

ax. single rope lifting speed of main winch (no load)

ax. single rope lifting speed of auxiliary winch (no load)

Full extension/retraction time of boom

Full lifting/dropping time of boom

Slewing speed

Full extension/retraction time of horizontal outrigger

Full extension/retraction time of vertical outrigger

ax. lifting height

Length of boom

Overall weight

Load

odel of engine

Rated engine power

ax. engine torque

Overall length

Overall width

Overall height

Axle distance

mm

mm

mm

mm

kg

kg

kg

w/rpm

N.m/rpm

m/h

m

mm

m/min

m/min

s

s

r/min

s

s

t

m

kN.m

kN.m

kN.m

m

m

m

m

m

m

m

140

140

55/39

43/57

2.7

31/31

25/25

35

3.05

1139

743

330

6.15 6.15

12.9

33.9

47.4

10

31.5

45.2

0 15 30

12150

2625

3410

3720

32300

16640

15660

American Cummins QSB6.7 Tier 3

119/2500

732/1500

40

12.2/6.2

350

23.9

23.3

75

Load of front axle

Load of rear axle

Base boom

Fully extended boom

Fully extended boom jib

Base boom

Fully extended boom

Fully extended boom jib

Base boom

Fully extended boom

Fully extended boom jib

Item Unit Data

Dim

en

sion

al

para

mete

rsTra

velin

g

para

mete

rsM

ain

Perfo

rman

ce D

ata

Op

era

ting

speed

p

ara

mete

rsW

eight

param

etersPo

wer

param

eters

Type

SRC350 WORKING RANGES

Range (m)

Liftin

g h

eig

ht (m

)

Boom

length

(m)

04

SANY TRUCk CRANE SRC350

05

LOAD CHART FOR MAIN BOOM

10

12

15

20

25

30

35

40

45

50

55

60

65

70

75

80

85

90

95

3.05

3.66

4.575

6.1

7.625

9.15

10.675

12.2

13.725

15.25

16.775

18.3

19.825

21.35

22.875

24.4

25.925

27.45

28.975

35000

31610

25400

18200

13630

22997

22997

21954

16670

12764

10121

22100

22100

20000

16000

12156

9131

7109

5661

　

21050

19000

15800

13050

10407

8525

6882

5549

4480

　

　

18432

14764

12288

10383

8597

6977

5620

4610

3777

3097

　

　

　

14145

11716

9906

8478

7049

5668

4653

3848

3201

2644

2180

　

　

　

10400

9400

8250

7100

6300

5590

4660

3860

3220

2700

2260

1860

1530

　

　

　

　

8600

7900

7050

6200

5520

4660

3870

3240

2720

2280

1920

1600

1300

1050

820

10 12.19 15.24 18.29 21.34 24.38 27.43 31.5

Fully extended outrigger 6.15m

Feet Meter

Ranges(m) Length of boom (m)

(Unit:kg)

LOAD CHART FOR MAIN BOOM

10

12

15

20

25

30

35

40

45

50

55

60

65

70

75

3.05

3.66

4.575

6.1

7.625

9.15

10.675

12.2

13.725

15.25

16.775

18.3

19.825

21.35

22.875

35000

30050

22000

13600

8799

22997

22997

19000

13650

9215

6460

22100

22100

18200

13700

9597

6807

5014

3766

　

21050

17500

13900

9853

7040

5232

3972

3044

2332

　

　

18432

14100

10038

7207

5388

4120

3186

2469

1902

1440

　

　

　

14145

10179

7335

5506

4232

3293

2573

2003

1541

1158

837

　

　

　

10400

8900

7300

5597

4319

3376

2653

2081

1616

1232

909

634

　

　

　

　

8600

7100

5693

4408

3462

2736

2161

1694

1308

984

707

10 12.19 15.24 18.29 21.34 24.38 27.43 31.5

0° 22° 35°

Feet Meter

Min.

elevation

Semi-extended outrigger 4.27m

Ranges(m) Length of boom (m)

(Unit:kg)

06

SANY TRUCk CRANE SRC350

10

12

15

20

25

30

35

40

45

50

3.05

3.66

4.575

6.1

7.625

9.15

10.675

12.2

13.725

15.25

23600

15484

10286

5933

3648

22700

16025

10748

6329

4007

2576

22100

16520

11170

6690

4336

2884

1900

1190

　

16853

11454

6932

4555

3090

2097

1379

836

　

　

11659

7106

4713

3238

2237

1514

967

539

　

　

　

7239

4833

3350

2344

1617

1067

636

　

　

　

7341

4925

3435

2425

1695

1143

710

　

　

　

　

5021

3524

2509

1776

1221

786

10 12.19 15.24 18.29 21.34 24.38 27.43 31.5

44° 49°23° 36° 55°

Feet Meter

Min.

elevation

Ranges(m) Length of boom (m)

No extended boom -2.39m

(Unit:kg)

LOAD CHART FOR MAIN BOOM

07

10

12

15

20

25

30

35

40

45

50

3.05

3.66

4.58

6.10

7.63

9.15

10.68

12.20

13.73

15.25

12315

10591

8596

6214

4581

12202

10546

8664

6441

4876

3607

8800

6577

5058

3910

2689

1824

6600

5080

3987

2883

2011

1362

860

10 12.19 15.24 18.29Feet Meter

Ranges(m) Length of boom (m)

Traveling under load, over front

(Unit:kg)

LOAD CHART FOR MAIN BOOM

10

12

15

20

25

30

35

40

3.05

3.66

4.58

6.10

7.63

9.15

10.68

12.20

10909

8907

6917

3962

2188

10932

9092

7053

4255

2525

1402

10433

8907

7303

4472

2833

1693

914

6305

4472

2953

1888

1101

530

10 12.19 15.24 18.29Feet Meter

Ranges(m) Length of boom (m)

Tire, 360° slewing

(Unit:kg)

LOAD CHART FOR MAIN BOOM

08

SANY TRUCk CRANE SRC350

① The values given in the table are the rated lifting capacities of the crane on an even and solid ground when the crane

is in the leveling state. The values above the thick real line in the table are dependent on the strength of crane, and the

values below the thick real line are dependent on the stability of crane.

② The operating range in the table refers to the actual range after hoisting.

③ The values of rated loads depending on stability surely follow ISO 4305.

④ The rated lifting capacity in the table includes the weight of lifting hook (the main lifting hook weighs 360kg and

auxiliary lifting hook 160kg) and hoisting tools.

⑤ If the actual boom length and range are between two values, the rated lifting capacity determined by the longer boom

and the larger range shall be selected for the lifting operation.

(Unit:kg)

3500

3300

3100

2800

2600

2300

2100

1800

1500

1100

700

2150

2100

2000

1900

1800

1650

1550

1350

1200

950

650

1650

1600

1550

1500

1400

1250

1150

1000

850

650

500

31.5+7.9

15° 30°0°

31.5+13.7

15° 30°0°

7

77

75

73

71

6

66

63

61

5

56

2250

2150

1950

1750

1600

1450

1350

1150

1050

650

500

1250

1200

1150

1100

1050

1000

950

850

750

600

900

900

850

800

750

700

660

600

550

500

7

77

75

73

71

6

66

63

61

5

56

32° 34° 34° 37° 39°35°

7

77

75

73

71

6

66

63

61

5

56

Min. elevation Min. elevation

Ranges(m) Ranges(m) Ranges(m)Jib offset αA Jib offset αA

LOAD CHART FOR JIB

09

B04S2ENAM1-SRC350