COMPLETE VINTAGE DISPERSAL SALE
Saturday 24th September Commencing at 11am
Great Brington, Northampton, NN7 4JB
On behalf of RF & JD Waddy
(Due to the property being sold)
Auctioneers: Bletsoes, Oakleigh House, Thrapston, Kettering,
Northamptonshire. NN14 4LJ www.bletsoes.co.uk
Auctioneers forward Bletsoes have been favoured with instructions to conduct this dispersal sale on behalf of RF & JD Waddy, who have sold their property. All lots come highly recommended and are sold to the highest bidder without reserve. A very genuine sale well worth inspection. Location and Directions to the Sale Off the main A428 Rugby to Northampton Road, signposted Great Brington. The property is located on the right hand side, before the church. “TO THE SALE” signs will be posted on the day of sale and there will be adequate parking in a nearby field, which is about 300 yards. Refreshments Light refreshments will be available. Viewing Friday 23rd September from 9am -5pm or the morning of the sale from 9am, or by appointment with the Auctioneer prior to these dates. VAT VAT will be payable on all lots in addition to the hammer price at the current standard rate payable of 20%, unless otherwise stated at the time of auction. Removal of Lots All lots must be cleared within 1 week of the sale date due to them leaving the farm or prior arrangement must be made with the Auctioneers. Registration of Bidders The Auctioneers request all willing purchasers to obtain a buyers number from the sale office prior to the commencement of the sale. Failure to obtain a buyer’s bid number may result in the Auctioneer refusing to accept your bid. If you have traded with Bletsoes in the past and have a permanent bidding number, please use this number. Auctioneer in Charge Alastair Brown 07885 804450 can be contacted regarding the sale, or owner Mr David Waddy 07860 822207. All persons entering the site do so at their own risk. All vehicles parked at, or entering the sale site, are at their owner’s risk. RICS CLIENT MONEY PROTECTION SCHEME All financial transactions within this sale are conducted
with the Auctioneers acting as principal. Sale proceeds are paid into a client bank account, the RICS
Client Money protection Scheme (CMPS) will apply to protect the Vendor.
Conditions of Sale Please see the back page of this catalogue for full details of our conditions of sale
All lots are the responsibility of the purchaser on the fall of the hammer
Books and Magazines etc. Gardner 180 Worksop Manual
Snap-on Catalogue
Facom Catalogue
Fordson Major Workshop Manual
Fenner Catalogue
1996 - 99 Peugeot Haynes Manual Petrol & Diesel
1988 - 92 Peugeot 405 Haynes Manual Petrol
1988 - 96 Peugeot 405 Haynes Manual
Ford Fiesta Haynes Manual
Land Rover Workshop Manual
1993 Spares Express List
Edbro Catalogue
Woodhead Catalogue
Conveyor News
Kidd Fymax operator manual
Thames Trader parts list
Technical Service data 56/58 51 / 52 Two no
Volvo Parts Cars P120 130 220
Lister LR & SR Engine Manual
Bedford K & J Parts Catalogue (Set of 2)
Bedford Boughton Conversion leaflet
1960's Brown Bros. Catalogue
Volvo P180 Catalogue
Volvo Standard Parts Catalogue
DKW Parts Book
Leyland Engine AU350 Service Book
Commercial Motor Show Number 1980
Atkinson of Clitheroe MK 1V Spreader Instruction & parts
Track Marshall Type H Leaflet
Marshall Road Roller Rd 2 Spare Parts & Instruction Book
Quarry & Mining News 1980
Commercial Motor Feb 9 1980
Seddon Atkinson 200 + 400Specs from Vee & Inline Dealers
Marshall Parts TSP (Utility) Road Roller
Plant Managers Journal Feb 1980
Construction & E Plant magazine March & May 1980
Commercial Motor (CM) Passenger Transport Issue 1979
Commercial Motor T45 Leyland 8.3. 80
Commercial Motor Bedford 75 years @ Dunstable 21.3.80
Commercial Motor Commercial Vehicles May 1978
Commercial Motor Queens Jubilee Issue May 1977
Commercial Motor Scottish Show Nov 1979
Commercial Motor Bulk Transport No Feb 1978
Commercial Motor Scottish Show No 1977
Commercial Motor NEC Show No Oct 1978
Farmers Weekly Royal Show June 1979
Austin A70 Instruction Book
Morris Minor Instruction Book
Austin 8 Instruction Book
1950's File of Farm Machinery Brochures
Fordson Major E27N Brochure
0ne Blackwell Calculator
Marshall / Fowler General Equipment brochure
Gardner LW & HLW leaflet
JCB 4 Instruction Book
Furniture
Set of Drawers 2 long & 2 Short
2 x Kitchen Chairs with high backs
Utility Wardrobe
Set of Dining Room Chairs
Edwardian Dining Room Table
Corner Cupboard
Drop Leaf Table
Kitchen Table
Workshop Furniture
2 x Steel Cupboard
Two & Four Drawer Filing Cabinets
4 x Chairs
Bench with 4 drawers
Small Workshop Table
Tools and Spares
Haydon Nilo Belt Stitcher for thick belting
Haydon Nilo Cutter
Belting Jointing System for CTinner Conveyor Belts
Stretcher for Drawing Conveyor Belts together for jointing
Large Taps 1"-17/8" some in original wrapping
Clarke 1000 Engine lifter nearly new
Air Operated Greaser + Barrel of Lubricate grease part full
Shot Blasting kit
10 Ton Duff Norton Jack
Fume Extractor Plus Filters
Tempest Propane Heater
0il Pressure test guage
0il Extractor New
Press Frame for use with hydraulic jack
Large Track adjusting spanner approx. 4"
Large Track adjusting bar
Bedford Rear Wheel/FWD axle locking nut spanner
Simms injector pipe former
Timing Light
Mercedes Carburettor Balancing kit (1960 220's)
Pin Punch for large drive chains
Pin Punch for small drive chains
Torque Multiplier 8:1 ratio
Tyre re-groover
Air saw
Large piston ring clamp
Large ball joint remover
Gas analyser for petrol engines
Two inch unsharpened drill
1 lathe vice horizontal
1 lorry axle thread restorer
Brake pipe flaring tool and cutter
Items marked with * are NOT subject to VAT
Westwood leaf gatherer *
24” ATCO Cylinder Mower with trailer seat. Tecumseh engine *
12 HP. 36” RANSOMES Westwood S1200 Rotary Mower *
LAND MASTER 4Stroke L120 cultivator *
WOLSELEY Major Tiller Briggs & Stratton Engine with 2 sets of attachments *
Tangram Gun Cabinet (128” high, 27” deep, 30” Wide complete with 2 Keys *
21” Victorian Cast Iron lawn roller *
Partner two stroke model T240 Strimmer *
FIELD MARSHALL Series 3 night night Sheet *
Towing Chain 4meters long with 13mm links
Miscellaneous Parts & Spares
Pair of Car Spring Compressors
Pair of Large bolt cutters
Bead knocker
Pair of tube less tyre levers
Peugeot hub puller
Edbro pump parts
Various old stock of unused sparking plugs
Various old stock of Hydraulic fittings
Mercedes tools for 1960's cars
Grease Gun cartridges
Quantity of Steel 5/ 16 brake pipe
Quantity of 110volt 100W bulbs
Quantity of 110V 150W
RoII of Plastic brake pipe
RoII of fuel pipe
Small Flexible Exhaust
Large Flexible Exhaust
Small Steel Exhaust
Large Steel Exhaust
Bedford S-type Grille
Glover & Son Sign
Ennals & Cooper Sign
John Allen & Ford Sign
Marshall Britannia Sign
Alliance Radiator Cap
Marshall Fowler fuel Cap
Garage Wall Thermometer
Keyboard
Light on stand
Tapley Brake Meter
CB Radios
Tool Box Steel old World War 2 Ammo Box
Wooden Tool Box
1900’s School Tuck Box
Gate Post Auger
Old fashioned pessary inserter for cattle
Circular Saw blade for Sawbench
Jabsco Impeller for Road Roller Spray pump
Pair of Clutch linings for Marshall TSP Road Roller
Cylinder Head Gasket for FORD 4000
Strong Tin Box 12" x 8”, x 7"
Gardner Block spanner
Gardner Injector Lifter
Gardner Main Bearing Extractor
Gardner Main Bearing spreader
Ford ES8W Radiator and Grille
Land Rover Radiator
4 Small Casters
Gardner Filter Assembly
Quantity of Mk 1 & 2 and Seddon Atkinson Wheel Nuts and Studs Front & Rear
Brake Parts for Seddon Atkinson Unused
4 New Seddon Atkinson Shackle Pins
2 used balance beam swivel pins
Type 30 spring Brake Unit
No of Unused Diaphragms
Seddon Atkinson Brake Linings on shoes for 8 wheelers unused
Seddon Atkinson 8 wheeler Front spring unused
Seddon Atkinson Rear Spring Unused
R Type Bedford Door Handle Unused
Unused Shackle Pins for R & S Type Bedfords
Starter for Bedford TK, Alternator for Bedford TK, Wiring Loom for for Bedford TK
Seat back for R Type Bedford
Water Pump for Ford Prefect Anglia S/E never used
Various Gaskets Minx , Vauxhall ,Gazelle
Peugeot 203 Clutch Plate unused
Bamford BL 48 baler knotters S/H
Bamford Needles Unused
Albion Clansman Fuel Pump
Albion Clansman Dashboard
Atkinson Seat Back
Pair of New Engine mounts Front Gardner Mk 2 Atkinson
Quantity of Spares lockers large & Small Wooden
Telescopic Drive Shaft (Fenner)
Pulley and Taperlock Unused
Briggs & Stratton 8 HP Engine used for an experimental job for 1 hr
Michigan Hydraulic Pump for 75C
Fowler Challenger 1 Clutch discs (Steering) used
Fowler VF/TM Track adjusting nuts one still in wrapping
Bedford Boughton Props
2 x Bedford R Type FR prop
Bedford R Type 25gallon fuel tank ex TK
2 x Bedford R Type 16 Gallon Fuel Tank OLB needs repair
Bedford Servo unit from TK
Bedford New Master/Cylinder for TK
Bedford R Type Servo
Bedford S Type artic Valve
Bedford foot valve for TK
Bedford hand brake lever unit for Boughton Conversion
Hunt Barrow Drill Seedbox
Old Track Aligning Tool
Roller track for fixing hoist to RSJ
1930's Wooden and Glass Garage doors and tracking
Chain hoist
Bedford Brake linings unused
Shackle Pins for Bedford R & S type Unused
Kysor Shutters and Shutterstat for Atkinson MK 2
38 DS kirkstall Crown Wheel and Pinion for Atkinson 8 wheeler
6 speed David Brown gearbox for Atkinson needs repair
5 speed gearbox for Bedford TK
Transfer Box for R type Bedford
Transfer Box for Bedford Boughton needs reco
1967 Austin set of props
1967 Austin Tewo speed rear axle
Tico crane that was taken from 1967 Austin
6 wheels from Austin 1967 similar to Bedford 1960 coaches
8 Wheels and Tyres from Highway trailer 10 stud 9 x 20
6 x 8, 25 x 20 Wheels and tyres from S type Bedford
6 x 9 X 20 Wheels and tyres from S type Bedford
2 x Tyres for Michigan 7 5A
Bedford R type Rear Axle Less diff
Bedford R Type Front Axle incomplete
3 phase 3 HP motor with 20:1 reduction box
Fenner torque arm reduction 20:1 on 12 " x 15’ Auger
Number a A and B Pulleys, Shafts and bearings
Fordson Major Parts Seat
Super Major Gearbox
Super Major housing
Ford Major Gearbox housing
Super Major Brake Shaft Left Hand
Super Major Brake Shaft Right Hand
3 x Super Major Brake Half shaft
2 x Super Major Trumpet Housing
Super Major Pedals and Shafts
Super Major Fuel pumps
Ford Major hydraulic arms and gearbox top
Ford Major Pair of cast FRONT wheels
Ford Major Front axle
Ford Major Fuel tank
Pair of Ford Elite plough Legs
Marshall / Fowler parts.
Set of Marshall Guards
Funnel Base
Engine Block
Main Casting Gears Engine Block
Rear Housing and Gear
Scarifying Tines and wedges for Marshall TSP Road Roller
Road Roller draw pins
Heavy Duty Drawbar for 10 Ton Trailer
Manifold for two 230 gallon tanks and meter
2 x Workshop Compressor
Workshop Air receiver
Rolls of Quarry belting
Belt for 20ft conveyor plain surface
Belt for 20ft conveyor chevron surface.
Atkinson of Clitheroe spreader parts. 1 David Brown reduction Box
New imperial worm wheels for Radicon Boxes
Radicon Box case
Pair of spinners unused
Quantity of Bed rollers
Belt rollers
Continuous belt approx 32ft long for 6 wheel hopper
Fertilizer chute for spreader unused
For Bode spreader. Tank, reduction box, motors, pipes and floor chain
JCB Hydradigger/Loadall 65 parts Pr loadall lift Rams
Dipper ram piston in faulty cylinder
Tile draining eject or bucket
24" bucket, 18" bucket, 6ft ditching bucket
Top Link
Tipping lever and link
Jack Ram
Slew Ram
Square hole Ram
Square hole Bucket
14 x 30 wheel and tyre
Hydraulic oil filters
Front wheel and hub + another hub
Hand Petrol pump (Godwin type)
Aluminium 20 rung double ladder
Aluminium gravity Randell Steps
Wheel barrow
Sack barrow as new
Metal work from two LMS sack barrows
Old Milk Churn
Two galvanized washing basins
Two man drive-all
Beatle
2 x Fish tail hay knife
Silage Knife
Scythe Blade
Spade and drainage scoop
3 x Hand Winches
Blacksmiths Drill
Anvil
Flat Roller
6 seed harrows no swaytrees
2 x 7 RTC Bamford Mower
Howard Rotavator
Ransomes 4 furrow plough needs full refurbishment
2 furrow mounted plough
230 gallon Bowser
24volt Swinglift crane very little use
Armstrong 22HP twin diesel on 300 amp Murex welding generator Old engines were runners when taken out of machines seized on standing
Morris 1000
Triumph 2000 + auto box
Morris Hodgekiss less governor (Industrial Cowley)
Lister 9 HP Engine
John Deere twin petrol and radiator ex.12A combine
Bedford petrol 28 HP ex. OLB lorry approx 1949
1950 Austin A 70 engine and gearbox +rear axle
Norman horizontal twin + fuel tank
2 x Ford ES8W van engine & gearbox +rear axle very rusty
Fowler twin diesel 1940's cracked block
Small Petter completely dismantled has been stored inside
Petter 10 HP with generator electrical gear missing
Dorman engine parts
4 ton Kidd Fymax spreader bed rollers dropped whilst standing belt and drives were all good
5KVA Petter on generator
40 KVA generator with Ford 27 1 1E engine in regular use for yard
Vehicles
1970 Atkinson tractor unit dismantled for spares all Gardner engine parts water sound
dismantled to get spare block. Ref TUH 370J log book + V5. David Brown g/box kirkstall axle
1973 Atkinson 8 wheel tipper alloy body gardner with David Brown g/box Kirkstall axle
UYG 631L V5 Cab needs rebuilding wooden struts rotten. Windscreens supplied
Ford D Series 7 .5 Ton tipper rough but engine good 6 cylinder diesel sloper. Run regularly.
LLR 303V V5
JCB Hydradigger /Loadal16 5. Front 1960 digger 959.
VVN483 log book
Michigan 75A shovel ex-army original not registered. No docs
Aveling Barford 20 Ton shovel TP500 380HP Cummins. No docs
Ford 550 digger
V5 TNA 772R tax exempt at present
Fordson Standard tractor
CNV 132 log book one of the last made March 1945
1945 Marshall Model M
FAH 986 V5 & log book. Put on the Marshall Register August 2010
NEW BUYERS REGISTRATION FORM Please register in the Auctioneers Office before you commence bidding
Name ………………………………………………………………………………………
Address ………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
Postcode ………………………………………………………………………………………
Telephone Number ……………………………………………………………………
Email ………………………………………………………………………………………
Reference ………………………………………………………………………………………
………………………………………………………………………………………
CONDITIONS OF SALE 1. The highest bidder to be the purchaser (but the Auctioneers reserve the right of refusing any bid) and if any
dispute arises at the last bid, the Auctioneers may name the purchaser or put the Lot up for sale again at the
Auctioneers’ discretion. The Auctioneers to fix the rate of bidding.
2. All prospective purchasers are to make themselves known to the Auctioneers prior to the time of sale, give their
full name, trading name, address and contact details.
3. All prospective purchasers not known to the Auctioneers and who wish to pay by cheque must contact the
Auctioneers prior to the sale day to make arrangements and provide two references and a banker’s reference.
Payment may be made by cash, cheque, bankers draft or a bank card. There will be a charge for payment by
bank card as follows: Personal and Business debit card no charge, Personal credit card 2% and Business credit
card 2.5%. All purchases to be paid for upon the fall of the hammer and on the day of sale. No purchases over
£500 will be released until funds are cleared. Please Note: Cash transactions over £10,000 cannot be accepted
according to Government.
4. VAT will be payable on all lots in addition to the hammer price at the current standard rate payable unless
otherwise stated.
5. Neither the vendors nor the Auctioneers make any warranty regarding engine hours or vehicle mileages.
6. All descriptions, either written or verbal, are for guidance purposes only. The Auctioneers or Vendors will not be
responsible for the accuracy of any such description. All lots are sold with all faults and errors of description.
Purchasers must satisfy themselves prior to the sale of a lot, as to the condition of each lot and should exercise
and rely on their own judgement as to whether the lot accords with its description.
7. Prospective purchasers should be aware that from time to time lots are withdrawn and other lots added. Please
contact the Auctioneers prior to the sale to ensure that any particular item of machinery is included in the sale.
8. It is the purchasers own responsibility to ensure all plant machinery and/or equipment complies with the Health
and Safety at Work Act 1974 before the purchased items are used in any place of work.
9. The Auctioneer, as agent for the vendor, reserves the right to bid up to the reserve price where set (if any) on all
lots.
10. At the fall of the hammer, the Purchaser will take full responsibility for the lot. The lot may not be removed from
the sale premises before payment is made in full. All lots must be paid for on the day of the sale.
11. No person will be allowed to remove any lot(s) without the printed pass to do so. Lots must be cleared within 7
days of sale.
12. Failure on behalf of the Purchaser to pay for any Lot (s) will result in a re-sale. Any deficit or costs incurred will
be the responsibility of the Original Purchaser.
13. The Vendors and the Auctioneers, as the Vendor's Agent, retain all title in any lots until all purchase monies have
been paid in full. Outstanding monies will be charged interest at an interest rate of 4% above the bank base
lending rate.
14. In all cases of transfer, the Original Purchaser shall be responsible for purchase money.
15. The Auctioneers will be pleased to take written commission bids prior to the sale. Forms are available on request.
16. The Sale of Goods by Auction will apply, a copy of which will be displayed on the morning of the sale. All
prospective purchasers should ensure they have read and understood those Conditions. The act of bidding will
be taken as acceptance of them.
All persons entering the sale site do so at their own risk.
All vehicles parked at or entering the sale site are at their owner’s risk.