Hydraulic Crawler Crane
Hydraulic Crawler Crane
SC-100
SC-100 liftingdwgcasing oscillatorclaimshellrotaryvibrohydromill
high engine powerThe TDC 2015 V8 offers high application performance and reliability by using a tried-and-tested technology with high power/volume ratio. The modern electronic injection system ensures low fuel consumption and therefore high operating economy.
new ergonomic cabNew Cab designed to be spacious, quite and comfortable for the operator assuring high productivity throughout the working day. Operation controls are conveniently located for easy access.
control systemThe DMS (Drilling Mate System) controls and monitors the operation of the machine. With the new electric-hydraulic proportional control the machine can perform more functions at the same time. A dedicated power module electronic control system ensures the main hydraulic pumps and diesel engine work at maximumefficiencyandproductivity.
winches with high line pullFree Fall winches with high performances even in the most demanding conditions. Nominal line pull at 1st layer = 304 kN; max rope speed = 71 m/min.
passive protection (handrails and guards)Handrails on rooftop protect against possible falls of maintenance people staff (FOPS compilant). Overhead and windshield guards (removable in case of emergency) protect from falling objects. The exterior design uses thick steel tubing along the bottom perimeter of the cabin, improving the resistance to fatigue and vibration.
Quick assembly and effi cient transportCounterweight with a self-handling system
(no need of a service crane). Crawlers can be retracted to respect 3,5 m wide in transport. Transport weight less than 50 ton (with removable tracks).
the soilmec advantageA real multifunctional machine, designed •from scratch to give you the best drilling solution.Long life expectancy with a high residual •value.Best price/performance ratio.•Built with the customer in mind.•
98
3
10
5
6
1
4
11 2
7
UndercarriageTurretWinchesBoom hoistLattice BoomCatheadJibHookSwivel Self erecting counterweightCab
1
5
3
7
9
2
6
4
8
10
11
DEUTZ TCD 2015 EnginePower rating @ 1900 rpm 480 kw 643 HPOperating weight (approx) 100000 kg 220460 lb Max lifting capacity 100000 kg @ 3,8 m 220460 lb @ 12.4 ftMax boom lenght 42 m 137.8 ftMax line pull 304 kn 68341 lbf
working configurations
sc-100 for diaphragm walls
sc-100 for diaphragm walls
sc-100 for material handling
sc-100 for bored piles
sc-100 for bored piles
sc-100 for liftingwith crane equipment
with hydraulic or mechanical rotary
with casing oscillator and hammer grab
with dw grab
with clamshell
with hydromill
technical specifications
5320
9385
4100
1000 363
1749
1196
80°
1839
2
technical specifications
Base machine
Side frames
Boom head Boom insert (6m) Boom insert (3m)
Counterweight
with boom foot, wire ropes, without basic counterweight and side frames
Width 3500 mm 137.8 in
Weight 50000 kg 110230 lb
Width 3500 mm 137.8 in
Weight 26500 kg 58422 lb
Width 6684 mm 263 in
Weight 13800 kg 30423 lb
Width 1520 mm 59.8 in
Weight 3830 kg 8443 lb
Width 1520 mm 59.8 in
Weight 1443 kg 3181 lb
Width 1520 mm 59.8 in
Weight 930 kg 2050 lb
transport dimensions and weights
3500 13172
2974
3500
2124
3545
993
6684
68
6000
2297
1289
.5
3000
1350 1708
1350 1708
3000
1500
main boom
Rated loads are in metric tons valid for 360 •degrees working area.Lifting capacities are in compiance with •DIN 15019/part 2/chart 1 and ISO 4305 and do not exceed 75% of tipping loadWorking radius are measured from the •swing center of the machine. Rated loads are calculated with the •machineonfirmandlevelground,withouttravellingWeights of lifting attachments (e.g.: hook, •
ropes, bucket, etc.) are included in the rated load: therefore their weights must be subtracted from rated load to obtain net lifting value.This load chart is valid if crawler frames are •extended. Lifting capacities are based on freely •suspended loads. Operator must reduce lifted loads and operating speeds in case of adverse conditions (e.g.: wind, soft ground, out-of-level, pendulum action,
sudden load stopping, operating speeds, etc.) This load chart are only for reference. For •actual lifting capacities please refer to load chart in operator’s manual.Instruction in the “Operator’s Manual” •must be strictly observed during machine operations.Operations are not approved for working •radius and boom lenghts that have no ratings associated on load chart
Notes
Auxiliary Jib
Max capacity18 t (39683 lb)25 t (55115 lb) optional
Load chart programmed in Load moment indicator
Boom Length (m)radius (m) 12 m 15 m 18 m 21 m 24 m 27 m 30 m 33 m 36 m 39 m 42 m radius (m)
3,8 100,0 3,84,0 90,0 4,04,2 - 89,1 4,24,5 90,0 89,1 4,54,7 - - 86,3 4,75,0 86,3 82,5 79,6 60,5 5,05,5 72,9 71,2 68,6 60,5 60,5 5,56,0 62,9 62,5 60,2 60,5 60,2 6,06,5 55,4 55,4 53,5 54,2 53,2 52,3 51,4 6,57,0 49,2 49,2 48,1 48,1 47,6 46,7 45,9 46,0 31,3 31,1 7,07,5 44,2 44,2 43,6 43,3 43,0 42,1 41,3 7,58,0 40,1 40,1 39,7 39,2 39,0 38,2 37,5 37,4 31,3 31,1 30,8 8,08,5 36,6 36,6 36,2 35,8 35,7 34,9 8,59,0 33,6 33,6 33,3 32,8 32,8 32,1 31,4 31,2 29,3 28,9 28,5 9,09,5 31,1 31,1 30,7 30,3 30,2 29,6 9,510,0 28,8 28,8 28,5 28,1 28,0 27,4 26,9 26,5 26,9 26,7 25,9 10,011,0 25,0 25,0 24,8 24,4 24,3 23,8 23,3 22,9 23,4 23,2 22,4 11,012,0 21,9 22,0 21,8 21,4 21,4 20,9 20,4 20,0 19,4 12,013,0 19,5 19,4 19,0 19,0 18,5 18,1 17,7 17,9 17,6 16,9 13,014,0 17,5 17,4 17,0 17,0 16,5 16,1 15,7 15,8 15,5 15,0 14,015,0 15,7 15,6 15,3 15,3 14,8 14,4 14,0 14,1 13,8 13,3 15,016,0 14,2 13,9 13,9 13,4 13,0 12,6 12,6 12,3 11,9 16,017,0 12,3 11,5 12,6 12,1 11,8 11,3 11,4 11,0 10,6 17,018,0 9,7 11,5 11,0 10,7 10,2 10,3 9,9 9,5 18,019,0 9,7 10,0 9,7 9,3 9,3 8,9 8,6 19,020,0 7,5 9,1 8,9 8,4 8,5 8,0 7,6 20,021,0 8,4 8,1 7,6 7,7 7,2 6,9 21,022,0 7,7 7,4 6,9 6,9 6,5 6,2 22,023,0 7,0 6,7 6,3 6,3 5,8 5,5 23,024,0 6,4 6,2 5,8 5,7 5,2 5,0 24,025,0 5,9 5,7 5,2 5,2 - 4,4 25,026,0 5,6 5,2 4,7 4,7 4,2 - 26,027,0 4,7 4,3 - - - 27,028,0 4,3 3,9 3,8 3,3 3,1 28,030,0 3,1 3,0 2,6 2,3 30,031,0 2,8 - - - 31,032,0 2,4 1,9 1,7 32,033,0 2,1 - - 33,034,0 1,4 1,2 34,036,0 0,9 0,7 36,038,0 0,2 38,0
Boom configurationtype lenght n° of boom extensions (*)boom foot 6 m 19.7 ft 1 1 1 1 1 1 1 1 1 1boom insert 3 m 9.8 ft 1 - 1 - 1 - 1 - 1 -boom insert 6 m 19.7 ft - 1 1 2 2 3 3 4 4 5boom head 6 m 19.7 ft 1 1 1 1 1 1 1 1 1 1boom lenght (m) 15 18 21 24 27 30 33 36 39 42boom lenght (ft) 49.2 59.1 68.9 78.7 88.6 98.4 108.3 118.1 128 137.8
load chart
capacity (t)
diaphragm wall grab eQuipment
Diaphragm Wall Grab
Winches 2 x 304 kn 2 x 68341 lbfMax chisel weight 20 t 44800 lb
Max allowable weight in two operation 28 t 61729 lb
casing oscillator eQuipment
Casing Oscillator with Hammer Grab
Winches 2 x 304 kn 2 x 68341 lbfDrilling diameter 2500 mm 97.5 in
Max allowable weight in two operation 28 t 61729 lb
hydraulic rotary eQuipment
Drilling performance
rotary drive - shifting gear type
Torque (nominal) 413 knm @ 35 mpa 304608 lbf ft @ 5076 psi
Speed of rotation (max) 30,7 rpm 30.7 rpm
Spinoff speed 65,5 rpm 65.5 rpm
crowd system
Crowd effective force 250 kn 56201 lbf
Stroke (kelly system) 2800 mm 110.24 in
Max drilling depth 94 m 308.4 ft
Max drilling diameter 4000* mm 157.6 in(*) The max drilling diameter value combined with max drilling depth has to be agreed with Soilmec.
rotary drive - shifting gear type
413 knm @ 35 mpa
new cab
OPERATIONAL COMFORT
The wide cab offers outstanding operator comfortandconfidencetoincreasedailyproduction.
To maximize visibility, all glass is fixed directly to the cab eliminating the use of window frames.
Air conditioning system.
Sound insulated cab.
Onecentralhighbrightnessledfixturetolight up all the cab. Two courtesy lights illuminate softly cabin controls during operator works.
ERGONOMY
The elegant and wide cab is more than a working station.
Consoles designed to guarantee easy activation of the switches and excellent visibility.
Large springy seat and manipulator console adjustable one each other.The new electro-proportional manipulators with illuminated (day/night) push buttons provide fast, safe and productive operations.
The new DMS monitor gives a complete control of machine operation.A hand throttle allows to have all the machine functions on the tip of three fingersonly.
SAFETY
The new Cab shows the Falling Object Guard System which includes overhead and windshield guards.
Cab instruments are ergonomically located to ensure safety.
Winch controls and new joysticks are designed to be compliant with safety standards and, in the meantime, reduce the operator fatigue.
Negative and positive free fall control with system both available.
All the working area is under control with LCD monitor of video-cameras which allows to check four quads at the same time.
dms and control system
The Soilmec proprietary control system installed on SC-100 allows control and coordination of machine functions: movements can be performed simultaneously.
The redundant plc system guarantees, in case of failure, no impact on machine availability: operator will be informed, through the touch panel display, about the specificproblem.
The Control System is auto-diagnosticable and related interfaces are plug&play.
The associated dms (drilling mate system) consist of:
DMS•DMS PC•DMS Manager•
dms standard provides:warning recording•trouble shooting helping the operator to •locate the faultefficient maintenance management: •DMS records and show all preventive maintenance operationsinterface with Power Module Control •Systemproduction and operation data storage •onCFcardorUSBflashdrivefortheprocessing (with DMS PC)connection to modem (GPRS, EDGE •or SATELLITE) to send out alarms/data to customer/Soilmec Control Centre (DMS Manager) or to an e-mail address
dms manager
Enables full remote control of the machine operations and processing of drilling data sentbymodem(wifi/satellite/GPRS).
DMS Manager allows to fully use the DMS potential for a truly comprehensive service to customer/jobsite.
spare part online center (spoc)The innovative technical web site of Soilmec has been published with the aim to give Soilmec Dealer Network continuous updated information regarding products and equipments, for a better interaction with the Customers.
Infact, SPOC offers the following online features:
consultation and downloading of •machine documentation, e. g. user and maintenance manuals, electrical/hydraulic drawings, DMS manuals, technical documentation, etc.placement and managment of purchase •orders for spare partsreal time availability of components of •spare parts.
working tools
cable grab gc-16 main boom
hydraulic rotary sa-40hydraulic grab (rotograb)
www.soilmec.it
All te
chni
cal d
ata
are
pure
ly in
dica
tive
and
subj
ect t
o ch
ange
with
out n
otice
03/2
011
- 100
- D/
F - D
igita
l Prin
t
SOILMEC distributes machinery and structures all over the world, supported by SOILMEC subsidiary companies and dealers. The complete Soilmec network list is available on the webpage www.soilmec.it