A new path for achieving your electrical installations
A comprehensive offer
Easergy range is part of a comprehensive offer of products that are perfectly coordinated to meet all medium and low voltage electrical distribution requirements. All of these products have been designed to work together: electrical, mechanical and communication compatibility. The electrical installation is thus optimised and has improved performance:• better service continuity,• increased personnel and equipment safety,• guaranteed upgradeability,• efficient monitoring and control.You therefore have all the advantages at hand in terms of know-how and creativity for achieving optimised, safe, upgradeable and compliant installations.
Tools for facilitating the design and installation
With Schneider Electric, you have a complete range of tools to help you get to know and install the products whilst complying with current standards and good working practices. These tools, technical sheets and guides, design software, training courses, etc are regularly updated.
Schneider Electric is associating itself with your know-how and your creativity to produce optimised, safe, upgradeable and compliant installations.
For a real partnership with you
A universal solution doesn’t exist because each electrical installation is specific. The variety of combinations on offer allows you to truly customise the technical solutions.You are able to express your creativity and put your know-how to best advantage when designing, manufacturing and exploiting an electrical installation.
Electric Industries SAS89, boulevard Franklin RooseveltF-92505 Rueil-Malmaison cedexTel : +33 (0) 1 41 29 85 00www.schneider-electric.com
ENMED199054EN
As standards, specifications and designs change from time to time, please ask for
confirmation of the information given in this publication.
Thisdocumenthasbeenprintedonecologicalpaper
Publishing: Schneider Electric IndustriesSASDesign: Schneider Electric Industries SASPrinting: Imprimerie des Deux Ponts - made in France 08-2008
Medium Voltage Distribution
Easergy RangeFault detection and remote controlWeb-enabled Power & Control
W200 / W500 - MV/LV substation monitoring
using a standard web browser
• Remote MV/LV substation monitoring:– monitoring consumption (loads, power data logs)– monitoring network quality (number of outages, duration)– monitoring transformers (temperature)
• Remote alarm by e-mail and GSM
• Consulting and editing logs from a standard Internetbrowser
• A two-level architecture– Easergy W200 located in MV/LV substations– Easergy W500 located in the control center
Optimise your MV/LV substation maintenanceTr
ansd
ucer
less m
easurement
GSM
tr
ansm
ission
Web interface
Web server
intranet
Optimising Medium Voltageelectrical network operation
Reducing down time
and improving productivity
• Reliable MV network fault detection and indication, for complete peace of mind• Optimized actions through detailed local or remote information• Remote network reconfiguration through control units (GSM, Internet, standard protocols, etc)
Keeping in control of invesments
• Solutions catalogue to meet every need in terms of budget and networkoperation• Simplified and controlled integration and operation• Modular and scaleable offer adapting to your current and future needs, for total flexibility.
Medium voltage overhead networks
Easergy Flite - A range of fault detectors for MV
overrhead networks.
Detectors for local fault current indication, perma-nent and transient, phase to phase and phase to earth.• Flite 110-SA and 112-SA: single-phase, line-mounted ammetric faultpassage detectors• Flite 210 and 230: single-phase, pole-mounted ammetric fault passagedetectors• Flite 3XX: three-phase, pole-mounted directional detectors
Communitating fault detector for remote indication• Flite 116-SA: single-phase, line-mounted ammetric fault passagedetectors communicating via short range radio with the G200 concentrator.• G200: Concentrator to provide local processing of data sent byFlite 116-SA units and communication with the control center.
Easergy T200 - Control unit for MV substations
and overhead switches with a high level of
integrated functions.
A flexible architecture with a high level of integratedfunctions:• Management of switchgears• Uninterruptible power supply• Fault passage indicator• Measurements• MV network reconfiguration automation• Large catolog of protocols: IEC 870-5-101 and 104, DNP3,Modbus, and various proprietary protocols• Various transmission systems: Ethernet, RS232, Radio, PSTN, GSM,
One solution for all networks• Easergy T200I: for underground networks• Easergy T200P: for overhead networks
Easergy Flair A range of fault detectors for MV
underground networks
Three-phase fault current detectors for local indi-cation of phase to phase and phase to earth fault currents.• Flair 2XD: self-powered, overcurrent detectors integrated in the MV switchgear• Flair 279 and 219: wall-mounted ammetric fault passage detectors• Flair 3XX: directional detectors
Communitating fault detector for remote indication• Flair 200C: three-phase overcurrent detector. In addition toconventional detection functions, Flair 200C integrates substation metering, monitoring and communication with the control center.
T200I Underground network control
Easergy L500 - Network control system
dedicated to the Easergy range
A simplified operation• Mini Scada with network view, detail view, alarm log and archive for Easergy equipment control• Simplified implementation through preconfigured libraries
