Date post: | 16-Apr-2017 |
Category: |
Documents |
Upload: | ralph-prise |
View: | 120 times |
Download: | 1 times |
In the workplace, ‘Slips and Trips’ make up one of the
highest accident statistics. Our products are uniquely
designed to eliminate these accidents even in the
harshest working environments.
Scotgrip® safety products incorporate the unique
Scotgrip® high-traction, anti-slip safety surface
which gives a sound foot-holding in the most extreme
conditions. These tough and durable products are
manufactured under BS EN IS0 9001:2008 quality
controlled conditions comprising of a reinforced
composite base and a graded aggregate surface.
As a Scotgrip® quality standard, these products are fire
rated, spark and friction tested.
Be assured our standards are high and the safety of
your personnel is paramount.
• Eliminates‘SlipsandTrips’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofit
• Reflectspositivelyonpersonnelperformance
Scotgrip(UK)Limitedaremanufacturersofhighquality,heavydutyanti-slipsafetyproductsforstairways,walkways,decks,ladders,rampsandgangwaysandiswellestablishedastheleadingforceinheavyduty,anti-slipsafetyproductsprimarilyfordrillingrigs,oilandgasproductionplatforms,marinevesselsandpapermillsworldwide.
Providingsafetysolutionstoindustry
Ref: SCGR Intro Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
Scotgrip®Anti-SlipSafetyProducts
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® safety products will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.
HEAvydUTy
Scotgrip® safety products are extremely durable and remain highly effectivefor many years.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® safety products are manufactured in a wide range of standardsizes. We regularly manufacture custom sizes to suit individual locations.
EASEoFiNSTALLATioN
Scotgrip® safety products are designed for quick and secure fitting, either bymechanical fixings, welding or bonding to existing surfaces. These products arepre-drilled where required for quick installation. Scotgrip® products are non-loadbearing and must have a suitable underlying structure to be secured to.We recommend our own fastening systems and adhesives for securing Scotgrip®
anti-slip safety products
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
This data sheet is an introduction to the full Scotgrip® anti-slip product range that we manufacture. If you would like individual product details/sizes, please refer to our datasheets for each product. These can be found under the Datasheets heading on our website: www.scotgrip.com
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):For installation details, please go to the Technical section of
our website: www.scotgrip.com
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
Scotgrip®Anti-SlipSafetyProducts Ref: SCGR Intro Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
SAFETyFoRSTAiRwAyS
Product CodePremier Stair Nosing SSNFootsure Stair Nosing FSNSafegrip® Stair Nosing GSNPremier Stair Tile SSTKicker Tread® KTS
SAFETyFoRLAddERS
Product CodeLadder Rung Covers (Square) LRCS Ladder Rung Covers (Round) LRCR
SAFETyFoRwALKwAySANddECKS
Product CodeGrating Cover Tile SGCTDecktile SDTWeld Decktile SWDTFlextile IFTSDrillmate® SDM
SAFETyFoRbRidgES/RAMPSProduct CodePipe/cable bridge PCB1 to PCB5 (5 different sizes)General Purpose Ramps GP1 to GP4 (4 different sizes)Stepmate Custom Please advise design req’d
SAFETyFoRgANgwAyS
Product CodeGangway Tread (Step) GW1Gangway Tread (Bar) GW2Gangway Tread (Elliptical) GW3
SigNALERTSAFETyMARKiNg
The ‘SignAlert’ safety marking system can be added to virtually all Scotgrip® anti-slip safety products.
PHoToLUMiNESCENTFiNiSHES
GW1 GW2 GW3
We can offer long lasting photoluminescent properties as an extra safety feature
The leading edge of a step is the most dangerous part,
especially if it has been damaged, worn smooth or
rounded by constant use. By installing Scotgrip® Premier
stair products not only is this slip hazard eliminated but
the lifespan of the step is greatly increased. These heavy
duty products are easily fitted onto open grating/grille,
chequered plate, concrete or wood.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourstairways.
• Eliminates‘SlipsandTrips’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistingsteps
• Reflectspositivelyonpersonnelperformance
Scotgrip®PremierstairproductsincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®
qualitystandard,theseproductsarefirerated,sparkandfrictiontested.
Providingsafetysolutionstoindustry
Ref: SCGR Premier Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
Stairways-Premier
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® Premier stair products will provide a sound foot-holding even in the most extreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.
HEAvydUTy
Scotgrip® Premier stair products are extremely durable and remain highly effectivefor many years.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® Premier stair products are manufactured in a wide range of standardsizes (see table opposite). We regularly manufacture custom sizes to suit individual locations.
EASEoFiNSTALLATioN
Scotgrip® Premier stair products are designed for quick and secure fitting, either by mechanical fixings or bonding to existing surfaces. These products are pre-drilled where required for quick installation. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
Stairways-Premier Ref: SCGR Premier Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
PRodUCTS Code
Scotgrip® Premier anti-slip stair nosing SSNScotgrip® Premier anti-slip stair tile SST
FiTTiNgdATA
FiXiNgHoLEPoSiTioN
If fixing holes are to be pre-drilled the following information is required:
We recommend our own fastening systems forsecuring Scotgrip® products.
STANdARdSizES
Custom sizes also available. Standard lip size on stair nosing is 30mm (1" approx.)
For installation details, please go to the Technical section of our website: www.scotgrip.com
Fittingonto: Method
Open grating/grille Type ‘S’ fixings (saddle assemblies)
Chequered plate Self tap screws or nut, bolt and washer
Concrete HPS impact fixingsWood screws or adhesive
40 80 100 130 160 200 260
inches 11/2 3 4 5 6 8 10
450 18 ✔ ✔ ✔ ✔ ✔ ✔ ✔
600 24 ✔ ✔ ✔ ✔ ✔ ✔ ✔
750 30 ✔ ✔ ✔ ✔ ✔ ✔ ✔
900 36 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1200 48 ✔ ✔ ✔ ✔ ✔ ✔ ✔
LEN
gTH
bREAdTH (dEPTH)mm
The leading edge of a step is the most dangerous part,
especially if it has been damaged, worn smooth or
rounded by constant use. By installing Scotgrip® Footsure
stair nosings not only is this slip hazard eliminated but
the lifespan of the step is greatly increased. These heavy
duty products are easily fitted onto open grating/grille,
chequered plate, concrete or wood.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourstairways.
• Eliminates‘SlipsandTrips’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistingsteps
• Reflectspositivelyonpersonnelperformance
Scotgrip®FootsurestairnosingsincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®
qualitystandard,theseproductsarefirerated,sparkandfrictiontested.
Providingsafetysolutionstoindustry
Ref: SCGR Footsure Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
Stairways-FSNFootsure
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® Footsure stair nosings will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.
HEAvydUTy
Scotgrip® Footsure stair nosings are extremely durable and remain highly effectivefor many years.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® Footsure stair nosings are manufactured in a wide range of standardsizes (see table opposite). We regularly manufacture custom sizes to suit individual locations.
EASEoFiNSTALLATioN
Scotgrip® Footsure stair nosings are designed for quick and secure fitting, either bymechanical fixings or bonding to existing surfaces. These products are pre-drilled where required for quick installation. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
Stairways-FSNFootsure Ref: SCGR Footsure Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
PRodUCTS Code
Scotgrip® anti-slip Footsure stair nosing FSN
FiTTiNgdATA
We recommend our own fastening systems for securing Scotgrip® products.
Custom sizes also available. Standard lip size on stair nosing is 30mm (1" approx.)
For installation details, please go to the Technical section of our website: www.scotgrip.com
STANdARdSizES
LENgTH
bREAdTH(dEPTH) 40 80 100 130 160 200 260
inches 11/2 3 4 5 6 8 10
450 18 ✔ ✔ ✔ ✔ ✔ ✔ ✔
600 24 ✔ ✔ ✔ ✔ ✔ ✔ ✔
750 30 ✔ ✔ ✔ ✔ ✔ ✔ ✔
900 36 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1200 48 ✔ ✔ ✔ ✔ ✔ ✔ ✔
mm
FiXiNgHoLEPoSiTioN
If fixing holes are to be pre-drilled the following information is required:
Fittingonto: Method
Open grating/grille Type ‘S’ fixings (saddle assemblies)
Chequered plate Self tap screws or nut, bolt and washer
Concrete HPS impact fixingsWood screws or adhesive
The leading edge of a step is the most dangerous
part, especially if it has been damaged, worn smooth
or rounded by constant use. By installing Scotgrip®
Safegrip® stair nosings not only is this slip hazard
eliminated but the lifespan of the step is greatly
increased. These products are easily fitted onto open
grating/grille, chequered plate, concrete or wood.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourstairways.
• Eliminates‘SlipsandTrips’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistingsteps
• Reflectspositivelyonpersonnelperformance
Scotgrip®Safegrip®stairnosingsincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holding.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®qualitystandard,theseproductsarefirerated,sparkandfrictiontested.
Providingsafetysolutionstoindustry
Ref: SCGR Safegrip Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
Stairways-Safegrip®
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® Safegrip® stair nosings will provide a sound foot-holding and willeliminate ‘Slips and Trips’ in your working environment.
Surface grade: Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow Other colours available – please ask.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® Safegrip® stair nosings are manufactured in a wide range of standardsizes (see table opposite). We regularly manufacture custom sizes to suitindividual locations.
EASEoFiNSTALLATioN
Scotgrip® Safegrip® stair nosings are designed for quick and secure fitting, either bymechanical fixings or bonding to existing surfaces. These products are pre-drilledwhere required for quick installation. Scotgrip® products are non-load bearing andmust have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
Stairways-Safegrip® Ref: SCGR Safegrip Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
PRodUCT Code
Scotgrip® Safegrip® anti-slip stair nosing GSN
FiTTiNgdATA
FiXiNgHoLEPoSiTioN
If fixing holes are to be pre-drilled the following information is required:
We recommend our own fastening systems for securing Scotgrip® products.
STANdARdSizES
Custom sizes also available. Standard lip size on stair nosing is 30mm (1" approx.)
For installation details, please go to the Technical section of our website: www.scotgrip.com
40 80 100 130 160 200 260
inches 11/2 3 4 5 6 8 10
450 18 ✔ ✔ ✔ ✔ ✔ ✔ ✔
600 24 ✔ ✔ ✔ ✔ ✔ ✔ ✔
750 30 ✔ ✔ ✔ ✔ ✔ ✔ ✔
900 36 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1200 48 ✔ ✔ ✔ ✔ ✔ ✔ ✔
LEN
gTH
bREAdTH (dEPTH)
Fittingonto: Method
Open grating/grille Type ‘S’ fixings (saddle assemblies)
Chequered plate Self tap screws or nut, bolt and washer
Concrete HPS impact fixingsWood screws or adhesive
mm
The leading edge of a step is the most dangerous part,
especially if it has been damaged, worn smooth or
rounded by constant use. The rear edge of a step can
also be a concern if objects can be dropped or kicked
over accidentally and fall below. By installing Scotgrip®
Kicker Tread® not only is this slip hazard and objects
dropping from a height eliminated but the lifespan of the
step is greatly increased.
These heavy duty products are easily fitted onto open
grating/grille, chequered plate, concrete or wood.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’and‘objectsdroppingfromaheight’onyourstairways.
• Eliminates‘SlipsandTrips’
• Eliminates‘objectsdroppingfromaheight’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Manufacturedtocustomerspecification
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistingsteps
• Reflectspositivelyonpersonnelperformance
Scotgrip®KickerTread®incorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®qualitystandard,theseproductsarefirerated,sparkandfrictiontested.Scotgrip®KickerTread®hastheaddedfeatureofasafety‘Kicker’incorporatedattherearofthetread.
Providingsafetysolutionstoindustry
Ref: SCGR KTS Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
Stairways-KTSKickerTread®
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® Kicker Tread® will provide a sound foot-holding even in the most extreme conditions and will eliminate ‘Slips and Trips’ and ‘Objects dropping from a height’ in your working environment.
Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.
HEAvydUTy
Scotgrip® Kicker Tread® is extremely durable and remain highly effectivefor many years.
MANUFACTUREdToCUSToMERSPECiFiCATioN
Scotgrip® Kicker Tread® is supplied to your requirements as the tread needsto be fairly snug with the stairway stringers.
SAFETy‘KiCKER’
A safety ‘Kicker’ is incorporated at the rear of the Kicker Tread® to prevent objectsbeing dropped or kicked over the back of it and fall below. We recommend this upstand ‘Kicker’ to be at least 100mm (4” approx) in height. We can increase or decrease this height to suit your requirements.
EASEoFiNSTALLATioN
Scotgrip® Kicker Tread® is designed for quick and secure fitting, either bymechanical fixings or bonding to existing surfaces. These products arepre-drilled where required for quick installation. Scotgrip® products are non-loadbearing and must have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):
For installation details, please go to the Technical section of our website: www.scotgrip.com
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
Stairways-KTSKickerTread® Ref: SCGR KTS Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
• Manufacturedtocustomerspecification Scotgrip® Kicker Tread® is supplied to your requirements as the tread needs to be fairly snug with the stairway stringers.
PRodUCT CodeScotgrip® anti-slip Kicker Tread® KTS
FiTTiNgdATA
STANdARdSizES
FiXiNgHoLEPoSiTioN
If fixing holes are to be pre-drilled the following information is required:
breadth(ordepth)ofStepLength*
UP TO 200mm (8” approx)UP TO 250mm (10” approx)UP TO 300mm (12” approx)
SUPPLIEDTO THE EXACT
LENGTH OFYOUR STEPS
*Please deduct 10mm (3/8” approx) from length of steps to allow for proper seating.
Kicker Tread® (underside)Kicker Tread®
• Easeofinstallation Scotgrip® Kicker Tread® is designed for quick and secure
fitting on your location. Our products are pre-drilled to aid installation.
Fittingonto: Method
Open grating Type ‘S’ fixings (saddle assemblies)
Chequered plate Self tap screws or nut, bolt and washer
Wood screws or adhesive
We feel that it would defeat the purpose to have
‘SignAlert’ on every step as there would be too many
messages, therefore we would recommend ‘SignAlert’ to
be placed at the first and last steps, possibly the middle
step depending on the stairway size. ‘SignAlert’ can
be of any description and can incorporate the clients
company logo to create a more positive impact with
regards to the safety messages given.
All Scotgrip® products with the ‘SignAlert’ safety marking
system incorporate the unique Scotgrip® high-traction
anti-slip safety surface which gives a sound foot-holding
in the most extreme conditions. These tough and durable
products are manufactured under BS EN IS0 9001:2008
quality controlled conditions comprising of a reinforced
composite base and a graded aggregate surface. As a
Scotgrip® quality standard, these products are fire rated,
spark and friction tested.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’andenhancesafetyonyourlocation.
• Eliminates‘SlipsandTrips’
• Promotesafetymessages/information
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistingsurfaces
• Reflectspositivelyonpersonnelperformance
TheScotgrip®‘SignAlert’safetymarkingsystemisproventobeaneffectivemethodofwarningpersonnelofanyhazards/hazardousareaswhichtheymaybeexposedtoandalsoasaremindertothinkofsafetyatalltimes.The‘SignAlert’systemcanbeaddedtovirtuallyallScotgrip®anti-slipsafetyproducts–themostpopularbeingstairnosings/treads,KickerTreads®andtiles.
Providingsafetysolutionstoindustry
Ref: SCGR SignAlert Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
SignAlertSafetyMarkingSystem
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® ‘SignAlert’ safety products will provide a sound footholding even in the most extreme conditions and will eliminate ‘Slips and Trips’ in your working environment. Please note: the product and message size will determine the surface grade available.
Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: blue/white, red/white, safety yellow, Fluorescent and photoluminescent finishes Other colours available – please ask.
HEAvydUTy
Scotgrip® ‘SignAlert’ safety products are extremely durable and remain highly effective for many years.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® ‘SignAlert’ safety products are manufactured in standard sizes (see table opposite). We regularly manufacture custom sizes to suit individual locations.
SAFETyMESSAgES/iNFoRMATioN
‘SignAlert’ can be of any description to promote safety messages/information and can incorporate the client’s company logo to create a more positive impact with regards to the safety messages given.
EASEoFiNSTALLATioN
Scotgrip® ‘SignAlert’ safety products are designed for quick and secure fitting, either by mechanical fixings or bonding to existing surfaces. These products are pre-drilled where required for quick installation. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
Message:
If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):For installation details, please go to the Technical section of
our website: www.scotgrip.com
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
SignAlertSafetyMarkingSystem Ref: SCGR SignAlert Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
For installation details, please go to the Technical section of our website: www.scotgrip.com
FiTTiNgdATA
FiXiNgHoLEPoSiTioN
If fixing holes are to be pre-drilled the following information is required:
We recommend our own fastening systems for securing Scotgrip® products.
STANdARdSizES
Custom sizes also available. Standard lip size on stair nosings is 30mm (1” approx).
LEN
gTH
bREAdTH (dEPTH)
mm 200 260
inches 8 10
700 28 ✔ ✔
900 36 ✔ ✔
1200 48 ✔ ✔
Scotgrip® Kicker Tread®
with ‘SignAlert’ message ‘Use Handrail’
Fittingonto: Method
Open grating/grille Type ‘S’ fixings (saddle assemblies)
Chequered plate Self tap screws or nut, bolt and washer
Concrete HPS impact fixingsWood screws or adhesive
We would recommend the following as a guideline for each stairway:
1 x tread for top step (USETRAiLiNgHANdTECHNiQUE)
1 x tread for bottom step (USEHANdRAiL)
Open grating/grille flooring is quite acceptable when
dry but can become extremely dangerous when wet,
soiled or painted. By installing Scotgrip® Grating Cover
Tiles, not only is this slip hazard eliminated but the
lifespan of the underlying open grating/grille is greatly
increased. These heavy duty products are secured
to open grating/grille with Scotgrip Type ‘S’ fixings
(saddle assemblies) comprising of an adjustable u-
clamp, nyloc nut and washer.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourwalkways/decks.
• Eliminates‘SlipsandTrips’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistingopengrating/grille
• Reflectspositivelyonpersonnelperformance
Scotgrip®gratingCoverTilesincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®
qualitystandard,theseproductsarefirerated,sparkandfrictiontested.
Providingsafetysolutionstoindustry
Ref: SCGR SGCT Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
walkways/decks-SgCTgratingCoverTile
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® Grating Cover Tiles will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.
HEAvydUTy
Scotgrip® Grating Cover Tiles are extremely durable and remain highly effectivefor many years.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® Grating Cover Tiles are manufactured in a wide range of standardsizes (see table opposite). We regularly manufacture custom sizes to suitindividual locations.
EASEoFiNSTALLATioN
Scotgrip® Grating Cover Tiles are designed for quick and secure fitting onto opengrating/grille using Scotgrip® Type ‘S’ fixings (saddle assemblies). These productsare pre-drilled where required for quick installation. Scotgrip® products arenon-load bearing and must have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
walkways/decks-SgCTgratingCoverTile Ref: SCGR SGCT Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
PRodUCT Code
Scotgrip® Anti-Slip Grating Cover Tile SGCT
FiTTiNgdATA
STANdARdSizES
Custom sizes also available.
For installation details, please go to the Technical section of our website: www.scotgrip.com
mm mm 500 600 700 800 900 1000 1200
inches 20 24 28 32 36 40 48
500 20 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1000 40 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1500 59 ✔ ✔ ✔ ✔ ✔ ✔ ✔
2000 79 ✔ ✔ ✔ ✔ ✔ ✔ ✔
2500 98 ✔ ✔ ✔ ✔ ✔ ✔ ✔
LEN
gTH
bREAdTH
SgCT
Fittingonto: Method
Open grating/grille Type ‘S’ fixings (saddle assemblies)
Walkways/decks/flooring can be made from various
materials including the following: flat steel, aluminium,
concrete or wood. Most of these materials are quite
acceptable when dry but can become extremely
dangerous when wet, soiled or painted.
By installing Scotgrip® Deck Tiles not only is this slip
hazard eliminated but the lifespan of the underlying
material is greatly increased. These heavy duty products
are secured either by mechanical fixings or bonded to
existing surfaces.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourwalkways/decks.
• Eliminates‘SlipsandTrips’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistingwalkways/decks
• Reflectspositivelyonpersonnelperformance
Scotgrip®deckTilesincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®
qualitystandard,theseproductsarefirerated,sparkandfrictiontested.
Providingsafetysolutionstoindustry
Ref: SCGR SDT Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
walkways/decks-SdTdeckTile
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® Deck Tiles will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.
HEAvydUTy
Scotgrip® Deck Tiles are extremely durable and remain highly effective for many years.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® Deck Tiles are manufactured in a wide range of standard sizes (see table opposite). We regularly manufacture custom sizes to suit individual locations.
EASEoFiNSTALLATioN
Scotgrip® Deck Tiles are designed for quick and secure fitting either by mechanicalfixings or bonding to existing surfaces. These products are pre-drilled where required for quick installation. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
If fixings or adhesive are required, please advise which type of surface you are securing to: (e.g. flat steel, aluminium, concrete, wood):
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
walkways/decks-SdTdeckTile Ref: SCGR SDT Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
PRodUCT Code
Scotgrip® Anti-Slip Deck Tile SDT
FiTTiNgdATA
We recommend our own fastening systems and adhesives for securing Scotgrip® products.
STANdARdSizES
Custom sizes also available.
For installation details, please go to the Technical section of our website: www.scotgrip.com
mm mm 500 600 700 800 900 1000 1200
inches 20 24 28 32 36 40 48
500 20 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1000 40 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1500 59 ✔ ✔ ✔ ✔ ✔ ✔ ✔
2000 79 ✔ ✔ ✔ ✔ ✔ ✔ ✔
2500 98 ✔ ✔ ✔ ✔ ✔ ✔ ✔
LEN
gTH
bREAdTH
SdT
Fittingonto: Method
Metal Deck Self tap screws or nut, bolt and washer, or adhesive
Concrete HPS impact fixingsWood Screws or adhesive
Steel decks are quite acceptable when dry but can
become extremely dangerous when wet, soiled or
painted. By installing Scotgrip® Weld Deck Tiles not
only is this slip hazard eliminated but the lifespan of
the underlying steel deck is greatly increased.
These heavy duty products are secured as the name
suggests – by welding. This unique safety product
is manufactured with built in protruding steel plates
around the perimeter of the tile. These plates are
positioned in such a way that if more than one tile
is fitted they can be butted up together by means of
interlocking the protruding steel plates.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourwalkways/decks.
• Eliminates‘SlipsandTrips’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistingwalkways/decks
• Reflectspositivelyonpersonnelperformance
Scotgrip®welddeckTilesincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®
qualitystandard,theseproductsarefirerated,sparkandfrictiontested.
Providingsafetysolutionstoindustry
Ref: SCGR SWDT Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
walkways/decks-SwdTwelddeckTile
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® Weld Deck Tiles will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.
HEAvydUTy
Scotgrip® Weld Deck Tiles are extremely durable and remain highly effectivefor many years.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® Weld Deck Tiles are manufactured in a wide range of standardsizes (see table opposite). We regularly manufacture custom sizes to suit individual locations.
EASEoFiNSTALLATioN
Scotgrip® Weld Deck Tiles are designed for quick and secure fitting by weldingthe protruding steel plates onto the steel deck. Scotgrip® products are non-loadbearing and must have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
walkways/decks-SwdTwelddeckTile Ref: SCGR SWDT Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
PRodUCT Code
Scotgrip® Anti-Slip Weld Deck Tile SWDT
FiTTiNgdATA
STANdARdSizES
Custom sizes also available.
For installation details, please go to the Technical section of our website: www.scotgrip.com
Weld plates are staggered to achieve close joint between tiles.
SwdT
Fittingonto: Method
Metal Deck By welding the protruding weld deck plates
mm mm 500 600 700 800 900 1000 1200
inches 20 24 28 32 36 40 48
500 20 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1000 40 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1500 59 ✔ ✔ ✔ ✔ ✔ ✔ ✔
2000 79 ✔ ✔ ✔ ✔ ✔ ✔ ✔
2500 98 ✔ ✔ ✔ ✔ ✔ ✔ ✔
LEN
gTH
bREAdTH
Drill Floors are quite acceptable when dry but can
become extremely dangerous when wet, soiled or
painted. By installing Scotgrip® Drillmate® Tiles not only
is this slip hazard eliminated but the lifespan of the
underlying structure is greatly increased.
These heavy duty products are secured by mechanical
fixings or by welding. This unique safety product can
be manufactured with built in protruding steel plates
around the perimeter of the tile. These plates are
positioned in such a way that if more than one tile is
fitted they can be butted up together by means of
interlocking the protruding steel plates.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourdrillfloor.
• Eliminates‘SlipsandTrips’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistingdrillfloors
• Reflectspositivelyonpersonnelperformance
Scotgrip®drillmate®TilesincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditionsandareproventowithstandtheheavyrigoursregularlyfoundinadrillingenvironment.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®qualitystandard,theseproductsarefirerated,sparkandfrictiontested.
Providingsafetysolutionstoindustry
Ref: SCGR Drillmate Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
drillFloorTile-SdMdrillmate®
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® Drillmate® Tiles will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Surface grades: High Profile – 6mm aggregate (1/4” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.
HEAvydUTy
Scotgrip® Drillmate® Tiles are extremely durable and remain highly effectivefor many years.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® Drillmate® Tiles can be supplied in the following sizes and adjusted tosuit on site:
1.0m x 1.0m (40” x 40”)2.5m x 1.0m (98” x 40”)
For custom manufacture please send a sketch to us with all dimensions andcut-out positions required of your drill floor arrangement.
EASEoFiNSTALLATioN
Scotgrip® Drillmate® Tiles can be secured to chequered plate, flat steel, opengrating/grille or wood by mechanical fixings. Another option is to add protrudingsteel plates during manufacture. These can be quickly and securely fitted by weldingthe protruding steel plates onto the steel deck. Scotgrip® products are non-loadbearing and must have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Please remember to send dimensions and cut-out positions required.
For installation details, please go to the Technical section of our website: www.scotgrip.com
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
drillFloorTile-SdMdrillmate® Ref: SCGR Drillmate Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
PRodUCTS Code
Scotgrip® Drillmate® Drill Floor Tile SDM
FiTTiNgdATA
wELdPLATEoPTioN
Weld plates are staggered to achieve close joint between tiles.
SdM Weld plates are staggered to achieve close joint between tiles.
Fittingonto: Method
Open grating/grille Type ‘S’ fixings (saddle assemblies)
Metal deck Self tap screws or nut, bolt and washer, By welding the protruding weld plates (if chosen), Scotgrip weld assemblies
Concrete HPS impact fixingsWood screws
Walkways/decks/flooring can be made from various
materials including the following: flat steel, aluminium,
concrete or wood. Most of these materials are quite
acceptable when dry but can become extremely
dangerous when wet, soiled or painted.
By installing Scotgrip® FlexTiles not only is this slip
hazard eliminated but the lifespan of the underlying
material is greatly increased. These heavy duty
products are secured either by mechanical fixings or
bonded to existing surfaces.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourwalkways/decks.
• Eliminates‘SlipsandTrips’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistingwalkways/decks
• Reflectspositivelyonpersonnelperformance
Scotgrip®FlexTilerollsincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®
qualitystandard,theseproductsarefirerated,sparkandfrictiontested.
Providingsafetysolutionstoindustry
Ref: SCGR FlexTile Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
walkways/decks-iFTSFlexTile
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® FlexTiles will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Surface grade: Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® FlexTiles are supplied in a 5m x 1m roll (16’ x 40”) We regularlymanufacture custom sizes to suit individual locations.
EASEoFiNSTALLATioN
Scotgrip® FlexTiles are designed for quick and secure fitting either by mechanicalfixings or bonding to existing surfaces. Scotgrip® products are non-load bearingand must have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
If fixings or adhesives are required, please advise which type of surface you are securing to: (e.g. flat steel, aluminium, concrete, wood):
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
walkways/decks-iFTSFlexTile Ref: SCGR FlexTile Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
PRodUCT Code
Scotgrip® Anti-Slip FlexTile IFTS
FiTTiNgdATA
We recommend our own fastening systems and adhesives for securing Scotgrip® products.
STANdARdSizES
Custom sizes also available.
For installation details, please go to the Technical section of our website: www.scotgrip.com
Fittingonto: Method
Metal Deck Self tap screws or nut, bolt and washer, or adhesive
Concrete HPS impact fixingsWood Screws or adhesive
5m x 1m (16” x 40”) (Supplied in a roll)
Ladder rungs are made in all shapes and sizes and can
become extremely dangerous when wet, soiled or oily.
By installing Scotgrip® Ladder rung covers (square or
round) not only is this slip hazard eliminated but the
lifespan of the ladder rung is greatly increased. These
heavy duty products are easily fitted onto existing
square and round ladder rungs using adhesives.
Our standard safety yellow ladder rung covers highlight
each rung when climbing or descending the ladder.
These products significantly enhance ladder safety.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourladders.
• Eliminates‘SlipsandTrips’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistingladderrungs
• Reflectspositivelyonpersonnelperformance
Scotgrip®LadderrungcoversincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®
qualitystandard,theseproductsarefirerated,sparkandfrictiontested.
Providingsafetysolutionstoindustry
Ref: SCGR Ladders Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
Ladders-LRCRRoundandLRCSSquare
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® Ladder rung covers will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Surface grade: Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black Other colours available – please ask.
HEAvydUTy
Scotgrip® Ladder rung covers are extremely durable and remain highly effectivefor many years.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® Ladder rung covers are manufactured in a wide range of standardsizes (see tables opposite). We regularly manufacture custom sizes to suitindividual locations.
EASEoFiNSTALLATioN
Scotgrip® Ladder rung covers are designed for quick and secure fitting, by bonding to existing ladder rungs with adhesives. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Please advise if adhesive is required to secure your ladder rung covers:For installation details, please go to the Technical section of our website: www.scotgrip.com
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
Ladders-LRCRRoundandLRCSSquare Ref: SCGR Ladders Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
PRodUCTS Code
Scotgrip® Anti-Slip Ladder Rung Covers (square) LRCSScotgrip® Anti-Slip Ladder Rung Covers (round) LRCR
FiTTiNgdATA
We recommend our own adhesives for securing Scotgrip® products.
STANdARdSizES
Custom sizes also available.
LRCS
LRCR
Scotgrip® ladder rung covers - round (LRCR)
Scotgrip® ladder rung covers - square (LRCS)
Fittingonto: Method
Steel Rungs Adhesive
20 25 30 40
inches 3/4 1 11/4 19/16
300 12 ✔ ✔ ✔ ✔
350 14 ✔ ✔ ✔ ✔
400 16 ✔ ✔ ✔ ✔
450 18 ✔ ✔ ✔ ✔
500 20 ✔ ✔ ✔ ✔
LEN
gTH
RoUNd (d iAMETER)mm
20 22 25 30
inches 3/4 7/8 1 11/4
300 12 ✔ ✔ ✔ ✔
350 14 ✔ ✔ ✔ ✔
400 16 ✔ ✔ ✔ ✔
450 18 ✔ ✔ ✔ ✔
500 20 ✔ ✔ ✔ ✔
LEN
gTH
SQUARE (bREAdTH)mm
Stepmate® bridges and ramps are designed to be placed
over the potential hazards of pipes, cables and hoses
in the workplace. These products are lightweight for
easy manual handling and can be used as a temporary
measure or as a more permanent fixture. If required, we
can incorporate protruding steel plates which can be
welded to the deck as a permanent fixture. Stepmate®
bridges and ramps have been designed for pedestrian
and light equipment use only.
Call us with your requirements. Eliminate ‘Slips and Trips’ in your working environment.
• Eliminates ‘Slips and Trips’
• Cost effective
• High traction anti-slip safety products
• Tough and durable
• Standard sizes and custom made
• Fully guaranteed
• Fire rated, spark and friction tested
• Non corrosive
• Easy to fit/lightweight construction
• Reflects positively on personnel performance
Scotgrip® manufactures Stepmate® bridges and ramps which incorporate the unique Scotgrip® high-traction anti-slip safety surface which gives a sound foot-holding in the most extreme conditions. These tough and durable products are manufactured under BS EN IS0 9001:2008 quality controlled conditions comprising of a reinforced composite base and a graded aggregate surface. As a Scotgrip® quality standard, these products are fire rated, spark and friction tested.
Providing safety solutions to industry
Ref: SCGR Stepmate® Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
Stepmate® Bridges and Ramps
Manufacturers of heavy duty, anti-slip safety products
HIgH-TRACTIoN ANTI-SlIP
Scotgrip® Stepmate® ramps will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)
HIgHly vISIBlE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow Other colours available – please ask.
HEAvy duTy
Scotgrip® Stepmate® ramps are extremely durable and remain highly effectivefor many years.
STANdARd SIzES oR To CuSToMER SPECIFICATIoN
Scotgrip® Stepmate® ramps are manufactured in a wide range of standardsizes (see tables opposite for standard pipe/cable bridges and GP ramps).We regularly manufacture custom bridges/ramps to suit individual locations.Please send a sketch with dimensions and we will get back to you with details.
EASE oF INSTAllATIoN
Scotgrip® Stepmate® ramps can be placed into position quickly and easily due totheir lightweight construction. Stepmate® ramps have been designed for pedestrian and light equipment use only. If necessary, weld tags can be built into the product at manufacturing stage.
QuAlITy – IT’S wHAT dRIvES uS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FuRTHER SCoTgRIP® PRoduCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.com where you will find all of our available products and details.
Step into a safer environment with Scotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRIP® oRdERINg/ENQuIRy INFoRMATIoNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
Please advise if weld tags are required:
For further advice or information contact: Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
Stepmate® Bridges and Ramps Ref: SCGR Stepmate® Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
PIPE/CABlE BRIdgES
gP RAMP
Custom sizes also available.
For installation details, please go to the Technical section of our website: www.scotgrip.com
PCB1 PCB2 PCB3 PCB4 PCB5
width 380 15" 610 24" 750 30" 900 36" 1100 43"
height 80 3" 110 4" 140 51/2" 155 6" 200 8"
length 1000 40" 1000 40" 1000 40" 1000 40" 1000 40"
no. of slots 3 3 3 3 3
45w 13/4"w 85w 33/8"w 115w 41/2"w 140w 51/2w 175w 7"w size of slot x x x x x x x x x x 35h 13/8"h 65h 21/2"h 100h 4"h 115h 41/2"h 150h 6"h
weight 10kg 22lbs 18kg 40lbs 24kg 53lbs 29kg 64lbs 36kg 80lbs
S E R I A l N u M B E R
inchesmm
STEPMATE® CuSToM RAMPS
GP1 GP2 GP3 GP4
width 410 16" 450 18" 500 20" 600 24"
height 100 4" 125 5" 150 6" 180 7"
length 1000 40" 1000 40" 1000 40" 1000 40"
a 75 3" 90 31/2" 115 41/2" 140 51/2"
b 175 7" 180 7" 200 8" 230 9"
c 100 4" 100 4" 100 4" 100 4"
weight 12kg 27lbs 14kg 31lbs 15kg 33lbs 17kg 38lbs
S E R I A l N u M B E R
inchesmm
Marine gangways are renowned for being extremely
dangerous, especially when the angle of the gangway
is steep and the surface is wet or oily or both. Some
gangways have metal or wooden spars across the
surface which can be a trip hazard in itself.
By installing Scotgrip® Gangway treads not only is this
slip hazard eliminated but the lifespan of the underlying
material is greatly increased. Scotgrip® Gangway treads
have been designed in 3 different styles (stepped, bar
and elliptical) to suit your individual location.
These heavy duty products are easily fitted onto open
grating/grille, chequered plate or wood.
Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourgangways.
• Eliminates‘SlipsandTrips’
• Costeffective
• Hightractionanti-slipsafetyproducts
• Toughanddurable
• Standardsizesandcustommade
• Fullyguaranteed
• Firerated,sparkandfrictiontested
• Noncorrosive
• Easytofitoverexistinggangways
• Reflectspositivelyonpersonnelperformance
Scotgrip®gangwaytreadsincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®
qualitystandard,theseproductsarefirerated,sparkandfrictiontested.
Providingsafetysolutionstoindustry
Ref: SCGR GW Issue No: 1
Issue Date: Mar 2010 Page No: 1 of 2
No. 10041261No. 23136
FQMFacilitators Quality Management
gangways
Manufacturersofheavyduty,anti-slipsafetyproducts
HigH-TRACTioNANTi-SLiP
Scotgrip® Gangway treads will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)
HigHLyviSibLE
Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.
HEAvydUTy
Scotgrip® Gangway treads are extremely durable and remain highly effectivefor many years.
STANdARdSizESoRToCUSToMERSPECiFiCATioN
Scotgrip® Gangway treads are manufactured in a wide range of standardsizes. We regularly manufacture custom sizes to suit individual locations.
EASEoFiNSTALLATioN
Scotgrip® Gangway treads are designed for quick and secure fitting, either bymechanical fixings or bonding to existing surfaces. These products are pre-drilledwhere required for quick installation. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.
QUALiTy–iT’SwHATdRivESUS
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.
FURTHERSCoTgRiP®PRodUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.
StepintoasaferenvironmentwithScotgrip®
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
anti-slip safety products as part of a continuous programme of improvement and innovation.
SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
Quantity:
Size:
Colour:
Surface grade:
If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, wood):For installation details, please go to the Technical section of
our website: www.scotgrip.com
Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
gangways Ref: SCGR GW Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2
STEPPEdgANgwAyTREAd SerialNogw1
bARgANgwAyTREAd SerialNogw2
ELLiPTiCALgANgwAyTREAdSerialNogw3