H1 SPRAY GUNS Overview Spray Guns Table of Contents High Pressure Spray Guns H3 Low Pressure Spray Guns H5 Low-Medium Pressure Spray Guns H9 Front Shut-Off Spray Gun Extensions H11 Spray Gun Extensions H12 Inlet and Outlet Spray Gun Adapters H16 Spray Gun Swivel Connectors and High Pressure Liquid Strainers H17 Section H – Spray Guns You’re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns Options range from a gentle spray to a high-impact solid stream All our spray guns are durable and efficient Many of our guns also offer: • Specially designed handles to improve control and reduce operator fatigue • Smooth-pull triggers to enable accurate and consistent flow control • Textured grips to minimize the chance for slippage and accidents • Leak-free operation. A complete line of accessories complements our spray guns Front shut-off extensions, extensions, inlet/outlet adapters, connectors and strainers are available to ensure easy, trouble-free operation Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email: [email protected]
You’re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns . Options range from a gentle spray to a high-impact solid stream .
All our spray guns are durable and efficient . Many of our guns also offer:
• Specially designed handles to improve control and reduce operator fatigue .
• Smooth-pull triggers to enable accurate and consistent flow control .
• Textured grips to minimize the chance for slippage and accidents .
• Leak-free operation.
A complete line of accessories complements our spray guns . Front shut-off extensions, extensions, inlet/outlet adapters, connectors and strainers are available to ensure easy, trouble-free operation .
• Never point a spray gun at another person or yourself. Injury can result.
• Use the trigger lock feature when the gun is not in use to avoid accidental discharge.
• Add an extension and handle to improve spray gun stability.
• Be sure to use the correct spray gun for your pressure and flow range to ensure safety and achieve maximum performance.
• The use of steam with spray guns is not recommended.
• Spray guns are rated for optimal flow rates. Use tips that match – no performance improvements will result from using a tip with a higher capacity than the spray gun.
• Eliminate water hammer and pressure spikes by using an unloader valve.
• Add a swivel to the hose to ensure easy movement of the spray gun and hose.
• Always use a check valve or similar bypass valve when using high pressures to ensure safety.
• Check and tighten fluid connections if necessary to avoid leaks.
• Use a spray gun with a “weep” feature to prevent freezing in cold environments.
• In-line strainers provide filtering to protect gun and purity of sprayed liquid.
• Proper selection of a spray gun, for your application, will reduce operator fatigue.
• Ultimate versatility is available with a complete selection of UniJet® spray tips to meet pattern and flow specifications.
• Available outlet adapters convert any standard thread allowing the attachment of many optional accessories.
• Standard one-piece nozzles, such as VeeJet® flat spray nozzles, can be used when mated with proper adapters.
• Ergonomic designs assure positive control and operator comfort even at maximum flow and pressure conditions.
Features and Benefits
Spray Guns, High Pressure
• Sturdy design and materials including nylon handles and trigger guards, forged brass valve bodies, Buna-N or Viton® stem seals, PTFE valve seats and stainless steel working parts mean long, productive equipment life.
• Optional “weep” feature (30A and 70) helps prevent freezing in cold conditions.
– Features easy-change color-coded spray caps with three flow capacities.
– Spray pattern can be adjusted from a solid stream to a 50° hollow cone pattern.
– Available with optional repair kits.
– Can be ordered in brass or lightweight aluminum with a corrosion-resistant rubber outer cover.
• All GunJet low pressure spray guns are designed to meet the special needs of low pressure applications.
• Versatile GunJet low pressure spray guns are designed for use with a wide variety of spray tips to meet particular pattern and flow specifications.
• Available outlet adapters convert any standard thread allowing the attachment of many optional accessories.
• Standard one-piece nozzles, such as VeeJet® flat spray nozzles, can be used when mated with proper adapters.
• Ergonomic designs assure positive control and operator comfort even at maximum flow and pressure conditions.
• Sturdy design and materials including nylon and polypropylene handles and trigger guards, forged brass valve bodies, Buna-N or Viton® stem seals, PTFE valve seats and stainless steel working parts mean long, productive equipment life.
• Key feature overview for 23624-30L:– For low pressure spot application of chemicals.
– Features an adjustable metering assembly that enables the applicator to discharge precisely metered volumes from 1 to 16 ml with a single pull of the trigger. Automatically recharges for the next dosage when the trigger is released.
• Key feature overview for CU150A:
• Complete line of accessories for 22650-PP TriggerJet® spray gun:– Extensions: 15" (381 mm) or 24" (610 mm). Part number 22665-PP.
– 45° adapter. Part number 22673-PPB.
– Straight adapter. Part number 22664-PPB.
– Adjustable ConeJet® spray tip. Part number 5500-PPB.
– UniJet® strainer. Part number 8079-50-PP.
• Key feature overview for 23623-31-1/4F:– Provides an adjustable metering assembly which allows
the applicator to discharge precisely metered volumes from 1 to 16 ml with a single pull of the trigger.
– Automatically recharges for the next dosage when the trigger is released.
• Trigger valve inlet handle options for 36, 4688, 6104, 6466 and 6590 with 1/4" NPT or BSPT (M) inlet connections:– Rubber covered handle with a 1/4" NPS (M) hose inlet
connection. Part number 4727.
– 1/8" brass pipe handle. 3/8" ID hose slips easily over the pipe handle. Part number 4725.
– Rubber covered handle with a 3/4" garden hose thread connection. Part number 4754.
– Internal strainer with choice of mesh sizes and a 1/4" NPT or BSPT (F) connection. Part number 5820.
• All are designed for use with UniJet® spray tips to meet a wide variety of pattern and flow specifications.
• Available outlet adapters convert any standard thread allowing the attachment of many optional accessories.
• Standard one-piece nozzles, such as VeeJet® flat spray nozzles, can be used when mated with proper adapters.
• Ergonomic designs assure positive control and operator comfort even at maximum flow and pressure conditions.
• For safety, trigger guards are designed to prevent accidental discharge.
• Sturdy design and materials including nickel-plated, brass or stainless steel inlet bodies, PTFE or nylon valve seats and stainless steel stems and brass guides mean long, productive equipment life.
