+ All Categories
Home > Documents > Seismic Analysis of Structures using OpenSEES · Giorgia Di Gangi Sapienza University of Rome...

Seismic Analysis of Structures using OpenSEES · Giorgia Di Gangi Sapienza University of Rome...

Date post: 05-Feb-2021
Category:
Upload: others
View: 5 times
Download: 1 times
Share this document with a friend
1
DISEG Dipartimento di Ingegneria Strutturale, Edile e Geotecnica Full Program WINTER SCHOOL 5 th International course on Seismic Analysis of Structures using OpenSEES Finite Element-based Framework and Civil Engineering Applications SCIENTIFIC COMMITTEE Giorgio Monti (Sapienza University of Rome, EOS), Giuseppe Carlo Marano (Politecnico di Torino), Camillo Nuti (Roma Tre University), Luciano Rosati (University of Naples Federico II), Bruno Briseghella (Fuzhou University), Fabrizio Mollaioli (Sapienza University of Rome), Sashi Kunnath (UC Davis), Yan Xiao (Zhejiang University/University of Illinois at Urbana Champaign Institute), Giuseppe Quaranta (Sapienza University of Rome), Rita Greco (Politecnico di Bari), Fabio Di Trapani (Politecnico di Torino), Cristoforo Demartino (Zhejiang University), Francesco Marmo (University of Naples Federico II), Giovanni Minafò (University of Palermo). MAIN ORGANIZERS Giorgio Monti (Sapienza University of Rome, EOS), Giuseppe Carlo Marano (Politecnico di Torino), Giuseppe Andrea Ferro (Politecnico di Torino), Fabio Di Trapani (Politecnico di Torino), Cristoforo Demartino (Zhejiang University). AIM OF THE COURSE OpenSEES (Open System for Earthquake Engineering Simulations) is an open source software conceived for the seismic analysis of structures. The source code is public to facilitate its wide diffusion and to be adaptable to the needs of users, who can also modify and extend default libraries in terms of materials, components, and algorithms. The main difficulties that users usually face during their first approach to OpenSEES are due to the program- ming language, which might appear rather complex. Following previous editions, the main goal of this short course is to provide a basic understanding of finite element-based theoretical framework and programming language in OpenSEES. Applications in research and practice will be also presented. SPEAKERS Dimitros Lignos École Polytechnique Fédérale de Lausanne Marzia Malavisi Politecnico di Torino Giorgia Di Gangi Sapienza University of Rome Seminars Applicative examples REGISTRATION AND FEES Registration is required before Januray 10, 2020 by sending an e-mail to: [email protected]. The individual fee cost is 100 €. VENUE Politecnico di Torino Aula 5D, Corso Duca degli Abruzzi, 24, 10129 Torino. January 20, 2020 8:30 -13:00 Registration, Framework, aims and scope of the course, Seminar “Multi-fidelity modelling for collapse simulation of steel and composite structures with OpenSees”, Fundamentals of FEM. 14:00-19:00 Seminar “Large scale simulations of virtual cities using OpenSees”, Introduction to TCL and OpenSees, Static analysis of elastic frame structures. January 21, 2020 9:00 -13:00 Methods and formulations for nonlinear analysis of reinforced con- crete frames, Static non-linear analysis of a simple structure using OpenSEES: concentrated plasticity approach. 14:00-19:00 Special elements and commands in OpenSEES, Advanced model- ling of masonry infills, Static non-linear analysis of a simple structu- re using OpenSEES: fiber approach, Modelling and analysis of an inelastic frame structure subject to static incremental loads. January 22, 2020 8:30 -13:00 Dynamic analysis of a simple structure using OpenSEES, An example of dynamic analysis varying input action and geometry, Connecting Matlab to OpenSEES and modelling of 3D structures, Identification of the constitutive laws of materials. 14:00-19:00 Modelling of shear-flexure interaction, Adding a new material to Open SEES, Nonlinear modelling and analysis of frame structures subject to seismic loads, Closure and certificate ceremony. SHORT PROGRAM (Full program at http://international.polito.it/catalogue/summer_schools) Gian Paolo CImellaro Poitecnico di Torino Theoretical and applicative lectures Cristoforo Demartino Zhejiang University Fabio Di Trapani Politecnico di Torino Emma La Malfa Ribolla Czech Technical University Giovanni Minafò University of Palermo Davide Lavorato Roma Tre University Francesco Marmo University of Naples Federico II Salvatore Sessa University of Naples Federico II Paolo Ricci University of Naples Federico II Mariano Di Domenico University of Naples Federico II
Transcript
  • DISEGDipartimento di Ingegneria Strutturale, Edile e Geotecnica

    Full

    Prog

    ram

    WINTER SCHOOL5th International course on

    Seismic Analysis of Structures using OpenSEESFinite Element-based Framework and Civil Engineering Applications

    SCIENTIFIC COMMITTEEGiorgio Monti (Sapienza University of Rome, EOS), Giuseppe Carlo Marano (Politecnico di Torino), Camillo Nuti (Roma Tre University), Luciano Rosati (University of Naples Federico II), Bruno Briseghella (Fuzhou University), Fabrizio Mollaioli (Sapienza University of Rome), Sashi Kunnath (UC Davis), Yan Xiao (Zhejiang University/University of Illinois at Urbana Champaign Institute), Giuseppe Quaranta (Sapienza University of Rome), Rita Greco (Politecnico di Bari), Fabio Di Trapani (Politecnico di Torino), Cristoforo Demartino (Zhejiang University), Francesco Marmo (University of Naples Federico II), Giovanni Minafò (University of Palermo).

    MAIN ORGANIZERSGiorgio Monti (Sapienza University of Rome, EOS), Giuseppe Carlo Marano (Politecnico di Torino), Giuseppe Andrea Ferro (Politecnico di Torino), Fabio Di Trapani (Politecnico di Torino), Cristoforo Demartino (Zhejiang University).

    AIM OF THE COURSEOpenSEES (Open System for Earthquake Engineering Simulations) is an open source software conceived for the seismic analysis of structures. The source code is public to facilitate its wide diffusion and to be adaptable to the needs of users, who can also modify and extend default libraries in terms of materials, components, and algorithms. The main difficulties that users usually face during their first approach to OpenSEES are due to the program-ming language, which might appear rather complex. Following previous editions, the main goal of this short course is to provide a basic understanding of finite element-based theoretical framework and programming language in OpenSEES. Applications in research and practice will be also presented.

    SPEAKERS

    Dimitros LignosÉcole Polytechnique Fédérale de

    Lausanne

    Marzia MalavisiPolitecnico di Torino

    Giorgia Di GangiSapienza University of Rome

    Seminars

    Applicative examples

    REGISTRATION AND FEESRegistration is required before Januray 10, 2020 by sending an e-mail to:[email protected]. The individual fee cost is 100 €.

    VENUEPolitecnico di Torino Aula 5D, Corso Duca degli Abruzzi, 24, 10129 Torino.

    January 20, 20208:30 -13:00 � Registration, � Framework, aims and scope of the course, � Seminar “Multi-fidelity modelling for collapse simulation of steel and composite structures with OpenSees”, � Fundamentals of FEM.14:00-19:00 � Seminar “Large scale simulations of virtual cities using OpenSees”, � Introduction to TCL and OpenSees, � Static analysis of elastic frame structures.

    January 21, 20209:00 -13:00 � Methods and formulations for nonlinear analysis of reinforced con- crete frames, � Static non-linear analysis of a simple structure using OpenSEES: concentrated plasticity approach.14:00-19:00 � Special elements and commands in OpenSEES, � Advanced model- ling of masonry infills, � Static non-linear analysis of a simple structu- re using OpenSEES: fiber approach, � Modelling and analysis of an inelastic frame structure subject to static incremental loads.

    January 22, 20208:30 -13:00 � Dynamic analysis of a simple structure using OpenSEES, � An example of dynamic analysis varying input action and geometry, � Connecting Matlab to OpenSEES and modelling of 3D structures, � Identification of the constitutive laws of materials.14:00-19:00 � Modelling of shear-flexure interaction, � Adding a new material to Open SEES, � Nonlinear modelling and analysis of frame structures subject to seismic loads, � Closure and certificate ceremony.

    SHORT PROGRAM(Full program at http://international.polito.it/catalogue/summer_schools)

    Gian Paolo CImellaroPoitecnico di Torino

    Theoretical and applicative lectures

    Cristoforo DemartinoZhejiang University

    Fabio Di TrapaniPolitecnico di Torino

    Emma La Malfa RibollaCzech Technical University

    Giovanni MinafòUniversity of Palermo

    Davide LavoratoRoma Tre University

    Francesco MarmoUniversity of Naples Federico II

    Salvatore SessaUniversity of Naples Federico II

    Paolo RicciUniversity of Naples Federico II

    Mariano Di DomenicoUniversity of Naples Federico II


Recommended