SERGE FERRARI Flexlight Advanced 902 S2
SERGE FERRARI Flexlight Perform 702 S2
SERGE FERRARI Flexlight Perform 502 S2
Technical Specifications SERGE FERRARI Flexlight Perform 502 S2 and 702 S2
accessories
Kedar 709 and 719: high performance bolt-ropes, coated on 1 or 2 sides for perfect finish
ATS (Air Tension System): Unique tension system for perfectly taut fabrics We recommend using Serge Ferrari Cleaner, specially designed to clean and
maintain FLEXLIGHT membranes
502 s2 702 s2 standards
weight 590 g/m2 750 g/m2 EN ISO
2286-2
width 250 / 267 cm 250 / 267 cm
standard format length
50 lm - 350 lm 50 lm - 300 lm
tensile strength
280/280 daN/5 cm 280/280 daN/5 cm EN ISO
1421
tear strength
28/28 daN/5 cm 30/28 daN/5 cm DIN
53.363
finish Formula S2 fluorinated varnish weldable Formula S2 fluorinated varnish weldable
flame retardancy
B-s2, d0/EN 13501-1 M2/NFP 92-507
Method 1/NFPA 701 CSFM T19
CLASS A/ASTM E84 B1/DIN 4102-1 BS
7837 1530.2 et 3/AS/NZS Classe 2/UNI
9177-07 M2/UNE 23.727-90 VKF 5.3/SN
198898 Group 1/AS/NZS 3837
CAN/ULC-S109 Schwerbrennbar Q1
Tr1/ONORM A 3800-1 G1/GOST
30244.94
B-s2, d0/EN 13501-1 M2/NFP 92-507
Method 2/NFPA 701 CSFM T19 B1/DIN
4102-1 BS 7837 1530.2 et 3/AS/NZS SIS
650082 /ETA Schwerbrennbar Q1-
Tr1/ONORM A 3800-1 M2/UNE 23.727-
90 VKF 5.3/SN 198898 Classe 2/UNI
9177 CAN ULCS 109 CAN/ULC-S 102
G1/GOST 30244.94 Class E/EN 11925-2
(SITAC)
Warranty 5 years 7 years
Technical Specifications SERGE FERRARI Flexlight Advanced 902 S2
accessories
We recommend using Serge Ferrari detergent to clean FLEXLIGHT membranes
services
Verification of consistent colour per translucency (VISU service) Special production and colours Short production runs 50 lm rolls available upon request
value standards
surface treatment / yarn Anticapilarity low wick yarns PES HT 1100
Dtex
weight 950 g/m² EN ISO 2286-2
width 267 cm
standard format length 220 ml
tensile strength (warp/weft)
420/400 daN/5cm EN ISO 1421 ASTM D 751-00 Cut
Strip
tear strength (warp/weft) 55/50 daN DIN 53.363 ASTM D 751-00
Trapezoid
flame retardancy B-s2,d0/EN 13501-1
warranty 15 years
AGTEX 951 P1
AGTEX 851 OP1- BLOCKOUT
AGTEX 751 P1
AGTEX 751 P1 – 750 GSM
Coating Material : PVC (Polyvinyl Chloride)
Base Fabric : High Tenacity Polyester
Yarn Size : 1,100 DTex
Total Weight : 750 gr/m2
Width : 250 cm, 300 cm
Thickness : 0.65 mm
Tensile Strength (warp/weft) : 300/300 daN/5cm
Tear Strength (warp/weft) : 30/30 daN
Working Temperature : -30 ∼ +70 oC
Flame Retardancy : Yes (B1, B-s1, d0)
Adhesion (warp/weft) : 10/10 daN/5cm
Lacquering (top/bottom) : PVDF/Acrylic
Standard EN ISO 2076 : Yarn Size
Standard EN ISO 2286-2 : Total Weight & Thickness
Standard EN ISO 1421 : Tensile Strength
Standard EN ISO 2411 : Adhesion
Standard DIN 53363 : Tear Strength
Standard DIN 4101-1 : Flame Retardancy (B1)
Standard DIN 13501-1 : Flame Retardancy (B-s1, d0)
AGTEX 951 P1 – 950 GSM
Coating Material : PVC (Polyvinyl Chloride)
Base Fabric : High Tenacity Polyester
Yarn Size : 1,100 DTex
Total Weight : 950 gr/m2
Width : 250 cm, 300 cm
Thickness : 0.75 mm
Tensile Strength (warp/weft) : 400/400 daN/5cm
Tear Strength (warp/weft) : 50/50 daN
Working Temperature : -30 ∼ +70 oC
Flame Retardancy : Yes (B1, B-s1, d0)
Adhesion (warp/weft) : 12/12 daN/5cm
Lacquering (top/bottom) : PVDF/Acrylic
Standard EN ISO 2076 : Yarn Size
Standard EN ISO 2286-2 : Total Weight & Thickness
Standard EN ISO 1421 : Tensile Strength
Standard EN ISO 2411 : Adhesion
Standard DIN 53363 : Tear Strength
Standard DIN 4101-1 : Flame Retardancy (B1)
Standard DIN 13501-1 : Flame Retardancy (B-s1, d0)
AGTEX 851 OP1 – 850 GSM
Coating Material : PVC (Polyvinyl Chloride)
Base Fabric : High Tenacity Polyester
Yarn Size : 1,100 DTex
Total Weight : 850 gr/m2
Width : 250 cm, 300 cm
Thickness : 0.7 mm
Tensile Strength (warp/weft) : 300/300 daN/5cm
Tear Strength (warp/weft) : 30/30 daN
Working Temperature : -30 ∼ +70 oC
Flame Retardancy : Yes (B1, B-s1, d0)
Adhesion (warp/weft) : 10/10 daN/5cm
Lacquering (top/bottom) : PVDF/Acrylic
Standard EN ISO 2076 : Yarn Size
Standard EN ISO 2286-2 : Total Weight & Thickness
Standard EN ISO 1421 : Tensile Strength
Standard EN ISO 2411 : Adhesion
Standard DIN 53363 : Tear Strength
Standard DIN 4101-1 : Flame Retardancy (B1)
Standard DIN 13501-1 : Flame Retardancy (B-s1, d0)
HEYTEX – TECHNICAL PROPERTIES
Category H5572-0289 700 gsm H5573-0289 900 gsm H5571-0828 850 gsm (blockout)
Certificate
Basic Fabric trade mark polyester trade mark polyester trade mark polyester DIN ISO 2076
Yarn 1100/1100 dtex (low wick treatment) 1100/1100 dtex (low wick treatment) 1100/1100 dtex (low wick treatment) DIN EN ISO 2060
Weave L 1/1 P 2/2 L 1/1 DIN ISO 9354
Threads (w/f) 9/9 pro cm (22.9/22.9 per inch) 12/12 pro cm (30.4/30.4 per inch) - DIN EN 1049-2
Coating Material (Top Coat)
PVC/PVDF (PVDF Mix Weldable) PVC/PVDF (PVDF Mix Weldable) PVC (Acrylic)
Total Weight ca. 700 g/m2 (approx. 20.6 oz/yd
2) ca. 900 g/m
2 (approx. 26.5 oz/yd
2) ca. 850 g/m
2 (approx. 25 oz/yd
2) DIN EN ISO 2286-2
Tensile Strength 3400/3100 N/5 cm 4600/4200 N/5 cm 3000/2900 N/5 cm DIN EN ISO 1421
Tear Resistance (w/f)(lbs) 380/340 N 630/550 N 330/290 N DIN 53363
Welding Adhesion min. 150 N/5 cm min. 130 N/5 cm min. 130 N/5 cm IVK 3.13
Flex-Resistance
min. 100.000 Knickungen (at least 100.000 bends)
min. 100.000 Knickungen (at least 100.000 bends)
min. 100.000 Knickungen (at least 100.000 bends)
DIN 53359 A
Cold Resistance - 30oC (-22
oF) - 30
oC (-22
oF) - 30
oC (-22
oF) DIN EN 1876-1
Flame Retardancy flame retardant flame retardant flame retardant DIN 4102 B1
DICKSON - LAC 950 SLF
DICKSON - LAC 720 SLF
DICKSON - LAC 650 SL
LAC 650 SL Technical sheet
USES
Recommended use Pergolas, Terrace awnings, Sail shade, Marquees, Glamping, Flexible doors
CHARACTERISTICS
VALUES UNITS
STANDARDS
WARP WEFT
GEN NERAL CHARACTERISTICS
Base cloth
1100 dTex PES HT
990 den
Coating PVC Lowick coating both side
Finish Cleangard lacquer both sides
Weight 680 g/m² ISO 3801
Width 250 250 250 300 300 300
cm
Roll length
30 60 250 30 60 250 ml
FABRIC RESISTANCE
Tensile strength 260 250 daN/5cm NF EN ISO 1421
Tear strength 32 28 daN DIN 53.363
Adhesion 8 daN/5cm NF EN ISO 2411
Elongation under load <1 <2 % NF EN 15619
Residual deformation <0.4 <0.8 % NF EN 15619
Cold resistance -30 °C NF EN 1876-2
Warm resistance 70 °C (24h)
Fire resistance
M2
NF P 92 503
B1 DIN 4102
BS
BS 7837
B-S2-D0
Euroclasses EN
13501-1
NFPA 701
NFPA 701
CSFM Title19 CSFM Title 19
Values may vary in a tolerance of +/-10%.
Specification maybe modified and are subject to
manufacturer's requisites. Product compatibility to
the application is reserved to the users☂ appraisal.
The buyer of our products is responsible for checking the validity of the above data.
LAC 720 SLF Technical sheet
USES
Recommended use Textile architecture
CHARACTERISTICS
VALUES UNITS
STANDARDS
WARP WEFT
GENERAL CHARACTERISTICS
Values may vary in a tolerance of +/-10%.
Specification maybe modified and are subject to
manufacturer's requisites. Product compatibility to
the application is reserved to the users☂ appraisal.
The buyer of our products is responsible for checking the validity of the above data.
Base cloth
1100 dTex PES HT
990 den
Coating PVC Lowick coating both side
Finish PVDF lacquer both sides
Weight 720 g/m² ISO 3801
Width 300 300 cm
Roll length 60 200 ml
FABRIC RESISTANCE
Tensile strength 260 250 daN/5cm NF EN ISO 1421
Tear strength 32 28 daN DIN 53.363
Adhesion 10 daN/5cm NF EN ISO 2411
Elongation under load <1 <2 % NF EN 15619
Residual deformation <0.4 <0.8 % NF EN 15619
Cold resistance -40 °C NF EN 1876-1
Warm resistance 70 °C (24h)
Fire resistance
M2
NF P 92 503
B1 DIN 4102
BS
BS 7837
B-S2-D0
Euroclasses EN
13501-1
NFPA 701 NFPA 701
LAC 950 SLF Technical sheet
USES
Recommended use Textile architecture
CHARACTERISTICS
VALUES UNITS
STANDARDS
WARP WEFT
GENERAL CHARACTERISTICS
Values may vary in a tolerance of +/-10%.
Specification maybe modified and are subject to
manufacturer's requisites. Product compatibility to
the application is reserved to the users☂ appraisal.
The buyer of our products is responsible for checking the validity of the above data.
Base cloth
1100 dTex PES HT
990 den
Coating PVC Lowick coating both side
Finish PVDF lacquer both sides
Weight 950 g/m² ISO 3801
Width 300 300 cm
Roll length 60 200 ml
FABRIC RESISTANCE
Tensile strength 400 400 daN/5cm NF EN ISO 1421
Tear strength 55 50 daN DIN 53.363
Adhesion 12 daN/5cm NF EN ISO 2411
Elongation under load <1 <2 % NF EN 15619
Residual deformation <0.4 <0.8 % NF EN 15619
Cold resistance -40 °C NF EN 1876-1
Warm resistance 70 °C (24h)
Fire resistance
M2
NF P 92 503
B1 DIN 4102
BS
BS 7837
B-S2-D0
Euroclasses EN
13501-1
NFPA 701 NFPA 701