SERVICE MANUAL BA-4D CHASSIS - Diagramas dediagramas.diagramasde.com/televisores/KV21ME43.pdfSERVICE...

SERSERSERSERSERVICE MANUALVICE MANUALVICE MANUALVICE MANUALVICE MANUAL BA-4D BA-4D BA-4D BA-4D BA-4D CHASSISCHASSISCHASSISCHASSISCHASSIS

MODEL COMMANDER DEST CHASSIS NO.

KV-21ME43KV-21ME43KV-21ME43KV-21ME43KV-21ME43 RM-Y156 E SCC-S55A-A

TRINITRONTRINITRONTRINITRONTRINITRONTRINITRON®®®®® COLOR TV COLOR TV COLOR TV COLOR TV COLOR TV

RM-Y156

KV-21ME43

900 Cover.p65 11/30/00, 8:09 AM1

— 2 —

KV-21ME43KV-21ME43KV-21ME43KV-21ME43KV-21ME43

SPECIFICASPECIFICASPECIFICASPECIFICASPECIFICATIONSTIONSTIONSTIONSTIONS

Design and specifications are subject to change without notice.Design and specifications are subject to change without notice.Design and specifications are subject to change without notice.Design and specifications are subject to change without notice.Design and specifications are subject to change without notice.

TTTTTelevision systemelevision systemelevision systemelevision systemelevision systemAmerican TV standard/NTSC

Picture tubePicture tubePicture tubePicture tubePicture tubeTrinitron® Tube

Channel coverageChannel coverageChannel coverageChannel coverageChannel coverageVHF:2-13/UHF:14-69/CATV:1-125

VVVVVisible screen sizeisible screen sizeisible screen sizeisible screen sizeisible screen size20" picture measured diagonally

Actual screen sizeActual screen sizeActual screen sizeActual screen sizeActual screen size21" picture measured diagonally

AntennaAntennaAntennaAntennaAntenna75 ohm external terminal for VHF/UHF

Supplied Supplied Supplied Supplied Supplied AccessoriesAccessoriesAccessoriesAccessoriesAccessories

Remote Commander (RM-Y156)Size AA (R6) batteries (2)

Optional Optional Optional Optional Optional AccessoriesAccessoriesAccessoriesAccessoriesAccessoriesDipole antennaConnecting cables VMC-810S/820S, VMC-720M,YC-15V/30V, RK74AU/V mixer EAC-66

KV-21M43

Power Requirements

Number of inputs/outputs

Video 1) 2

Audio Input 2) 2

Audio Out 3) -

Speaker Output (W) 3Wx2

Power Consumption (W)

In Use (Max) 80W

In Standby 1W

Dimensions (W/H/D)

(mm)522 x 477 x 479

mm

(in)

205/8 x 1813/16 x

187/8 in.

Mass

(kg) 21.6 kg

(lbs) 48 lbs.

AUTO VOLT120-220V,50/60 Hz

1) 1 Vp-p 75 ohms unbalanced, sync negative.2) 500 mVrms (100% modulation), impedance: 47 kilohms3) More than 408 mVrms at the maximum volume settting

(variable), More that 408 mVrms (fix), impedance: 5 kilohms

(((((•••••))))) SRS (SOUND RETRIEVSRS (SOUND RETRIEVSRS (SOUND RETRIEVSRS (SOUND RETRIEVSRS (SOUND RETRIEVALALALALAL SYSTEM) SYSTEM) SYSTEM) SYSTEM) SYSTEM)

The (((((•••••))))) SRS (SOUND RETRIEVAL SYSTEM) ismanufactured by Sony Corporation under licensefrom SRS Labs, Inc. It is covered by U.S. Patent No.4,748,669. Other U.S. and foreign patents pending.

The word ‘SRS’ and the SRS symbol (((((•••••))))) areregistered trademarks of SRS Labs, Inc.

BBE and BBE symbol are trademarks of BBESound, Inc. and are licensed by BBE Sound, Inc.under U.S. Patent No. 4,638,258 and 4,482,866.

— 3 —


Section Title PageWarnings and Cautions .................................................................................................................................................. 4Self-Diagnostic Function ................................................................................................................................................. 4Safety Check Out Instructions ........................................................................................................................................ 7

1.1.1.1.1. GENERALGENERALGENERALGENERALGENERAL .............................................................................................................................................................8

2.2.2.2.2. DISASSEMBLDISASSEMBLDISASSEMBLDISASSEMBLDISASSEMBLYYYYY2-1. Rear Cover Removal ..................................................................................................................................................... 122-2. A Board Removal .......................................................................................................................................................... 122-3. Service Position ............................................................................................................................................................ 122-4. Picture Tube Removal ................................................................................................................................................... 13

3.3.3.3.3. SET-UP ADJUSTMENTSSET-UP ADJUSTMENTSSET-UP ADJUSTMENTSSET-UP ADJUSTMENTSSET-UP ADJUSTMENTS3-1. Beam Landing ............................................................................................................................................................... 143-2. Convergence ................................................................................................................................................................ 153-3. Focus ............................................................................................................................................................................ 163-4. Screen (G2) .................................................................................................................................................................. 163-5. Method of Setting the Service Adjustment Mode ......................................................................................................... 163-6. White Balance Adjustments ......................................................................................................................................... 16

4.4.4.4.4. SAFETYSAFETYSAFETYSAFETYSAFETY RELA RELA RELA RELA RELATED TED TED TED TED ADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTS4-1. R582 Confirmation Method (HV Hold-Down Confirmation and Readjustments) .................................................... 174-2. B+ Voltage Confirmation and Adjustment ..................................................................................................................... 17

5.5.5.5.5. CIRCUIT ADJUSTMENTSCIRCUIT ADJUSTMENTSCIRCUIT ADJUSTMENTSCIRCUIT ADJUSTMENTSCIRCUIT ADJUSTMENTS5-1. Setting the Service Adjustment Mode .......................................................................................................................... 195-2. Memory Write Confirmation Method .............................................................................................................................. 195-3. Adjust Buttons and Indicators ...................................................................................................................................... 195-4. A Board Adjustments ................................................................................................................................................... 22

6.6.6.6.6. DIAGRAMSDIAGRAMSDIAGRAMSDIAGRAMSDIAGRAMS6-1. Block Diagram ............................................................................................................................................................... 276-2. Circuit Board Location .................................................................................................................................................. 306-3. Printed Wiring Boards and Schematic Diagrams ......................................................................................................... 30

• A Board .................................................................................................................................................................... 35• C Board .................................................................................................................................................................... 39

6-4. Semiconductors ............................................................................................................................................................ 41

7.7.7.7.7. EXPLODED VIEWSEXPLODED VIEWSEXPLODED VIEWSEXPLODED VIEWSEXPLODED VIEWS7-1. Chassis ......................................................................................................................................................................... 42

8.8.8.8.8. ELECTRICALELECTRICALELECTRICALELECTRICALELECTRICAL P P P P PARTS LISTARTS LISTARTS LISTARTS LISTARTS LIST ...........................................................................................................................43

Packaging List and Accessories....................................................................................................................................................49

TTTTTABLE OF CONTENTSABLE OF CONTENTSABLE OF CONTENTSABLE OF CONTENTSABLE OF CONTENTS

— 4 —


WWWWWARNINGS ARNINGS ARNINGS ARNINGS ARNINGS AND CAUTIONSAND CAUTIONSAND CAUTIONSAND CAUTIONSAND CAUTIONS

CAUTION

SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE ANDTHE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, ORCARBON PAINTED ON THE CRT, AFTER REMOVING THEANODE.

WARNING!!

AN ISOLATION TRANSFORMER SHOULD BE USED DURINGANY SERVICE TO AVOID POSSIBLE SHOCK HAZARD,BECAUSE OF LIVE CHASSIS. THE CHASSIS OF THISRECEIVER IS DIRECTLY CONNECTED TO THE AC POWERLINE.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY SHADING AND MARK ONTHE SCHEMATIC DIAGRAMS, EXPLODED VIEWS, AND IN THEPARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACETHESE COMPONENTS WITH SONY PARTS WHOSE PARTNUMBERS APPEAR AS SHOWN IN THIS MANUALOR IN SUPPLEMENTS PUBLISHED BY SONY. CIRCUITADJUSTMENTS THAT ARE CRITICAL FOR SAFE OPERATIONARE IDENTIFIED IN THIS MANUAL. FOLLOW THESEPROCEDURES WHENEVER CRITICAL COMPONENTS AREREPLACED OR IMPROPER OPERATION IS SUSPECTED.

ATTENTION

APRES AVOIR DECONNECTE LE CAP DE L'ANODE, COURT-CIRCUITER L'ANODEDU TUBE CATHODIQUE ET CELUI DE L'ANODE DU CAP AU CHASSISMETALLIQUE DE L'APPAREIL, OU AU COUCHE DE CARBONE PEINTE SUR LETUBE CATHODIQUE OU AU BLINDAGE DU TUBE CATHODIQUE.

ATTENTION!!!!!!!!!!

AFIN D'EVITER TOUT RESQUE D'ELECTROCUTION PROVENANT D'UN CHÁSSISSOUS TENSION, UN TRANSFORMATEUR D'ISOLEMENT DOIT ETRE UTILISÉLORS DE TOUT DÉPANNAGE. LE CHÁSSIS DE CE RÉCEPTEUR ESTDIRECTEMENT RACCORDÉ À L'ALIMENTATION SECTEUR.

ATTENTION AUX COMPOSANTS RELATIFS A LA SECURITE!!

LES COMPOSANTS IDENTIFIES PAR UNE TRAME ET PAR UNE MARQUE SURLES SCHEMAS DE PRINCIPE, LES VUES EXPLOSEES ET LES LISTES DEPIECES SONT D'UNEIMPORTANCE CRITIQUE POUR LA SECURITE DUFONCTIONNEMENT. NE LES REMPLACER QUE PAR DES COMPOSANTS SONYDONT LE NUMERO DE PIECE EST INDIQUE DANS LE PRESENT MANUEL OUDANS DES SUPPLEMENTS PUBLIES PAR SONY. LES REGLAGES DECIRCUIT DONT L'IMPORTANCE EST CRITIQUE POUR LA SECURITE DUFONCTIONNEMENT SONT IDENTIFIES DANS LE PRESENT MANUEL. SUIVRE CESPROCEDURES LORS DE CHAQUE REMPLACEMENT DE COMPOSANTSCRITIQUES, OU LORSQU'UN MAUVAIS FONTIONNEMENT SUSPECTE.

SELF-DIAGNOSTIC FUNCTIONSELF-DIAGNOSTIC FUNCTIONSELF-DIAGNOSTIC FUNCTIONSELF-DIAGNOSTIC FUNCTIONSELF-DIAGNOSTIC FUNCTION

The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER LED will automatically begin toflash. The number of times the LED flashes translates to a probable source of the problem. A definition of the STANDBY/TIMER LEDflash indicators is listed in the instruction manual for the user’s knowledge and reference. If an error symptom cannot be reproduced, theRemote Commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often theseproblems occur.

Diagnostic TDiagnostic TDiagnostic TDiagnostic TDiagnostic Test Indicatorsest Indicatorsest Indicatorsest Indicatorsest IndicatorsWhen an error occurs, the STANDBY/TIMER LED will flash a set number of times to indicate the possible cause of the problem. Ifthere is more than one error, the LED will identify the first of the problem areas.

Results for all of the following diagnostic items are displayed on screen. No error has occurred if the screen displays a “0”.

Diagnostic Item Description

No. of Times STANDBY/TIMER

LED Flashes

Self-diagnostic Display/ Diagnostic Result

Probable CauseLocation Detected Symptoms

Power does not turn on Does not light • Power cord is not plugged in.

• Fuse is burned out (F601).

• Power does not come on.

• No power is supplied to the TV.

• AC power supply is faulty.

+B overcurrent (OCP)* 2 times 2:0 or 2:1 • H.OUT (Q502) is shorted (A Board)

• IC701 and Q701 (C Board) are shorted.

• Power does not come on.

• Load on power line is shorted.

Vertical deflection stopped* 4 times 4:0 or 4:1 • +13V is not supplied. (A Board)

• IC541 is faulty. (A Board)

• Has entered standby state after horizontal raster.

• Vertical deflection pulse is stopped.

• Power line is shorted or power supply is stopped.

White balance failure (not balanced)

5 times 5:0 or 5:1 • Video OUT (Q394 to 392) is faulty. (A Board)

• IC301 is faulty. (A Board)

• Screen (G2) is improperly adjusted.**

• No raster is generated.

• CRT cathode current detection reference pulse output is small.

* If a +B overcurrent is detected, stoppage of the vertical deflection is detected simultaneously.The symptom that is diagnosed first by the microcontroller is displayed on the screen.

** Refer to Screen (G2) Adjustments in Sections 3 and 4 of this manual.

— 5 —


Display of Standby/TDisplay of Standby/TDisplay of Standby/TDisplay of Standby/TDisplay of Standby/Timer LED Flash Countimer LED Flash Countimer LED Flash Countimer LED Flash Countimer LED Flash Count

2 times

4 times

5 times

LED ON 0.3 sec.

LED OFF 0.3 sec. LED OFF3 sec.

Diagnostic ItemDiagnostic ItemDiagnostic ItemDiagnostic ItemDiagnostic Item Flash Count*Flash Count*Flash Count*Flash Count*Flash Count*+B overcurrent 2 timesVertical deflection stopped 4 timesWhite balance failure 5 times

*One flash count is not used for self-diagnostic.

Stopping the Standby/TStopping the Standby/TStopping the Standby/TStopping the Standby/TStopping the Standby/Timer LED Flashimer LED Flashimer LED Flashimer LED Flashimer LED FlashTurn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY/TIMER LED fromflashing.

Self-Diagnostic Screen DisplaySelf-Diagnostic Screen DisplaySelf-Diagnostic Screen DisplaySelf-Diagnostic Screen DisplaySelf-Diagnostic Screen DisplayFor errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it ispossible to bring up past occurrences of failure on the screen for confirmation.

TTTTTo Bring Up Scro Bring Up Scro Bring Up Scro Bring Up Scro Bring Up Screen een een een een TTTTTestestestestest

In standby mode, press buttons on the Remote Commander sequentially, in rapid succession, as shown below:

Display Channel 5 Sound volume

Note that this differs from entering the service mode (sound volume ).

Power ON

+

Self Diagnostic ScrSelf Diagnostic ScrSelf Diagnostic ScrSelf Diagnostic ScrSelf Diagnostic Screen Displayeen Displayeen Displayeen Displayeen Display

SELF DIAGNOSTIC2: 03: N/A 04: 05: 1101: N/A 0

Numeral “0” means that no fault was detected.

Numeral “1” means a fault was detected one time only.

STANDBY/TIMER LED

— 6 —


Handling of Self-diagnostic Screen DisplayHandling of Self-diagnostic Screen DisplayHandling of Self-diagnostic Screen DisplayHandling of Self-diagnostic Screen DisplayHandling of Self-diagnostic Screen DisplaySince the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen duringrepairs. When you have completed the repairs, clear the result display to “0”.

Unless the result display is cleared to “0”, the self-diagnostic function will not be able to detect subsequent faults after completionof the repairs.

Clearing the Result DisplayClearing the Result DisplayClearing the Result DisplayClearing the Result DisplayClearing the Result DisplayTo clear the result display to “0”, press buttons on the Remote Commander sequentially when the diagnostic screen is displayed,as shown below:

ENTERChannel 8

Quitting the Self-Diagnostic ScrQuitting the Self-Diagnostic ScrQuitting the Self-Diagnostic ScrQuitting the Self-Diagnostic ScrQuitting the Self-Diagnostic ScreeneeneeneeneenTo quit the entire self-diagnostic screen, turn off the power switch on the Remote Commander or the main unit.

Self-diagnostic CircuitSelf-diagnostic CircuitSelf-diagnostic CircuitSelf-diagnostic CircuitSelf-diagnostic Circuit

IC301Y/CHROMA JUNGLE

IC541V. OUT

IC001SYSTEM

IC003MEMORY

IK INFROMCRT

21

HP/PROTECT

SDA

FROMIC521PIN 7

18

35 IO-SDATO-LED

37

REF 3 I-PROT

IO-BDAT

1736 B-DAT5

18DISPLAY

+B over+B over+B over+B over+B overcurrcurrcurrcurrcurrent (OCP)ent (OCP)ent (OCP)ent (OCP)ent (OCP) Occurs when an overcurrent on the +B (115V) line is detected by pin 18 of IC301. If the voltageof pin 18 of IC301 is less than 1V when V.SYNC is more than seven verticals in a period, theunit will automatically turn off.

VVVVVererererertical deflection stoppedtical deflection stoppedtical deflection stoppedtical deflection stoppedtical deflection stopped Occurs when an absence of the vertical deflection pulse is detected by pin 17 of IC001. Powersupply will shut down when waveform interval exceeds 2 seconds.

White balance failurWhite balance failurWhite balance failurWhite balance failurWhite balance failureeeee If the RGB levels* do not balance within 2 seconds after the power is turned on, this error will bedetected by IC301. TV will stay on, but there will be no picture.

*(Refers to the RGB levels of the AKB detection Ref pulse that detects 1K.)

— 7 —


After correcting the original service problem, perform thefollowing safety checks before releasing the set to thecustomer:

1. Check the area of your repair for unsoldered or poorlysoldered connections. Check the entire board surfacefor solder splashes and bridges.

2. Check the interboard wiring to ensure that no wiresare “pinched” or touching high-wattage resistors.

3. Check that all control knobs, shields, covers, groundstraps, and mounting hardware have been replaced.Be absolutely certain that you have replaced all theinsulators.

4. Look for unauthorized replacement parts, particularlytransistors, that were installed during a previousrepair. Point them out to the customer andrecommend their replacement.

5. Look for parts which, though functioning, showobvious signs of deterioration. Point them out to thecustomer and recommend their replacement.

6. Check the line cords for cracks and abrasion.Recommend the replacement of any such line cordto the customer.

7. Check the B+ and HV to see if they are specifiedvalues. Make sure your instruments are accurate;be suspicious of your HV meter if sets always havelow HV.

8. Check the antenna terminals, metal trim, “metallized”knobs, screws, and all other exposed metal parts forAC leakage. Check leakage as described below.

SAFETY CHECK-OUTSAFETY CHECK-OUTSAFETY CHECK-OUTSAFETY CHECK-OUTSAFETY CHECK-OUT

Leakage TLeakage TLeakage TLeakage TLeakage Testestestestest

The AC leakage from any exposed metal part to earthground and from all exposed metal parts to any exposedmetal part having a return to chassis, must not exceed0.5 mA (500 microampere). Leakage current can bemeasured by any one of three methods.

1. A commercial leakage tester, such as the Simpson229 or RCA WT-540A. Follow the manufacturers'instructions to use these instructions.

2. A battery-operated AC milliammeter. The DataPrecision 245 digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor bymeans of a VOM or battery-operated AC voltmeter.The “limit” indication is 0.75 V, so analog meters musthave an accurate low voltage scale. The Simpson’s250 and Sanwa SH-63Trd are examples of passiveVOMs that are suitable. Nearly all battery-operateddigital multimeters that have a 2 VAC range aresuitable (see Figure A).

How to Find a Good Earth GroundHow to Find a Good Earth GroundHow to Find a Good Earth GroundHow to Find a Good Earth GroundHow to Find a Good Earth Ground

A cold-water pipe is guaranteed earth ground; the cover-plate retaining screw on most AC outlet boxes is also atearth ground. If the retaining screw is to be used as yourearth ground, verify that it is at ground by measuring theresistance between it and a cold-water pipe with anohmmeter. The reading should be zero ohms. If a cold-water pipe is not accessible, connect a 60- to 100-watttrouble light (not a neon lamp) between the hot side of thereceptacle and the retaining screw. Try both slots, ifnecessary, to locate the hot side on the line; the lampshould light at normal brilliance if the screw is at groundpotential (see Figure B).

Figure B. Checking for earth ground.Figure B. Checking for earth ground.Figure B. Checking for earth ground.Figure B. Checking for earth ground.Figure B. Checking for earth ground.Figure Figure Figure Figure Figure A. Using an A. Using an A. Using an A. Using an A. Using an AC voltmeter to check AC voltmeter to check AC voltmeter to check AC voltmeter to check AC voltmeter to check AC leakage.AC leakage.AC leakage.AC leakage.AC leakage.

To Exposed MetalParts on Set

Earth Ground

ACVoltmeter(0.75 V)

Trouble Light

AC Outlet BoxOhmmeter

Cold-water Pipe

— 8 —

KV-21ME43KV-21ME43KV-21ME43KV-21ME43KV-21ME43S

EC

TIO

N 1

G

EN

ER

AL

SE

CT

ION

1

GE

NE

RA

LS

EC

TIO

N 1

G

EN

ER

AL

SE

CT

ION

1

GE

NE

RA

LS

EC

TIO

N 1

G

EN

ER

AL

Co

nn

ecti

ng

Yo

ur

TV

3

Conn

ecti

ng Y

our

TVR

ead

this

cha

pter

bef

ore

sett

ing

up

you

r T

V fo

r th

e fi

rst t

ime.

Thi

s se

ctio

n co

vers

bas

ic c

onne

ctio

ns in

ad

dit

ion

to a

ny o

ptio

nal e

quip

men

t you

may

be

con

nect

ing.

Basi

c Co

nnec

tion

sTV

wit

h in

door

or

outd

oor

ante

nna,

or

CATV

cab

le

Dep

end

ing

on th

e ca

ble

avai

labl

e in

you

r ho

me,

cho

ose

one

of th

e co

nnec

tion

s be

low

:

If

you

are

conn

ectin

g to

an

indo

or o

r ou

tdoo

r an

tenn

a, it

will

be

nece

ssar

y to

ad

just

the

orie

ntat

ion

of t

he a

nten

na f

or b

est

rece

ptio

n.

4 Use

r G

uid

e

Conn

ecti

ng A

ddit

iona

l Equ

ipm

ent

TV a

nd V

CR

1C

onne

ct th

e co

axia

l cab

le fr

om y

our

TV

ant

enna

or

cabl

e T

V to

the

IN

jack

on

your

VC

R.

2C

onne

ct a

coa

xial

cab

le (n

ot s

uppl

ied

) fro

m th

e O

UT

jack

on

your

V

CR

to th

e V

HF/

UH

F IN

jack

on

the

TV.

(Opt

iona

l Con

nect

ion)

3If

you

r V

CR

is e

quip

ped

wit

h vi

deo

inpu

ts, f

or b

est p

ictu

re q

ualit

y yo

u sh

ould

con

nect

A/

V c

onne

ctor

s to

AU

DIO

/V

IDE

O O

UT

on

your

VC

R to

AU

DIO

/VID

EO

IN o

n yo

ur T

V. Y

ou c

an u

se th

e

butt

on to

sw

itch

bet

wee

n th

e T

V a

nd V

CR

inpu

ts.

To

wat

ch v

ideo

pro

gram

s fr

om y

our

VC

R, t

une

your

TV

to

chan

nel 3

or

4 (a

s se

t on

the

rea

r of

you

r V

CR)

.

The

inst

ruct

ions

men

tione

d he

re a

re p

artia

l abs

trac

ts f

rom

the

Ope

ratin

g In

stru

ctio

nM

anua

l. T

he p

age

num

bers

sho

wn

refle

ct t

hose

of

the

Ope

ratin

g In

stru

ctio

n M

anua

l.

— 9 —


Co

nn

ecti

ng

Yo

ur

TV

5

TV a

nd C

able

Box

1C

onne

ct th

e co

axia

l cab

le fr

om th

e w

all t

o th

e IN

jack

on

your

cab

le

box.

2C

onne

ct a

coa

xial

cab

le (n

ot s

uppl

ied

) fro

m th

e O

UT

jack

on

your

ca

ble

box

to th

e V

HF/

UH

F IN

jack

on

the

TV.

To

vie

w c

hann

els

from

you

r ca

ble

box,

tun

e yo

ur T

V t

o ch

anne

l 3 o

r 4

(as

set

on t

he r

ear

pane

l of

your

cab

le b

ox) a

nd u

se t

he c

able

box

’s re

mot

e co

ntro

l to

chan

ge c

hann

els.

If

you

will

be

cont

rolli

ng a

ll ch

anne

l sel

ectio

n th

roug

h yo

ur c

able

box

, you

sh

ould

con

side

r us

ing

the

CH

AN

NEL

FIX

fea

ture

on

page

17.

6 Use

r G

uid

e

TV, V

CR, a

nd C

able

box

1C

onne

ct th

e co

axia

l cab

le fr

om th

e w

all t

o th

e IN

jack

on

your

cab

le

box.

2C

onne

ct a

coa

xial

cab

le (n

ot s

uppl

ied

) fro

m th

e O

UT

jack

on

your

ca

ble

box

to th

e IN

jack

on

you

r V

CR

.

3C

onne

ct a

coa

xial

cab

le fr

om O

UT

on

your

VC

R to

VH

F/U

HF

IN o

n yo

ur

TV.

(Opt

iona

l Con

nect

ion)

4If

you

r V

CR

is e

quip

ped

wit

h vi

deo

inpu

ts, f

or b

est p

ictu

re q

ual

ity

you

sho

uld

con

nect

A/

V c

onne

ctor

s to

AU

DIO

/V

IDE

O O

UT

on

your

VC

R to

AU

DIO

/V

IDE

O IN

on

your

TV.

You

can

use

the

bu

tton

to s

wit

ch b

etw

een

the

TV

and

VC

R in

puts

.

If

you

will

be

cont

rolli

ng a

ll ch

anne

l sel

ectio

n th

roug

h yo

ur c

able

box

, you

sh

ould

con

side

r us

ing

the

CH

AN

NEL

FIX

fea

ture

on

page

17.

2

— 10 —


Co

nn

ecti

ng

Yo

ur

TV

7

Conn

ecti

ng a

Cam

cord

er

Usi

ng A

/V

cab

les,

con

nect

AU

DIO

and

VID

EO

OU

T o

n yo

ur c

amco

rder

to

AU

DIO

and

VID

EO

IN o

n yo

ur

TV.

Fo

r m

odel

KV

-13M

42, t

his

conn

ectio

n ca

n be

mad

e to

the

A/V

inpu

t lo

cate

d on

the

rea

r of

the

TV.

A/V

ou

tpu

t (F

ron

t A

/V P

anel

)

Usi

ng

th

e R

emo

te C

on

tro

l an

d B

asic

Fu

nct

ion

s 9

Usi

ng t

he R

emot

e Co

ntro

l and

Ba

sic

Func

tion

sT

his

sect

ion

show

s yo

u h

ow to

use

mor

e ad

vanc

ed b

utt

ons

on th

e re

mot

e co

ntro

l and

how

to u

se th

e on

-scr

een

men

us.

Tur

ns th

e T

V o

ff a

utom

atic

ally

in a

ppro

xim

atel

y 30

, 60

or 9

0 m

inut

es. C

ance

l by

pres

sing

unt

il SL

EE

P O

FF a

ppea

rs.

Inst

antl

y tu

rns

off t

he s

ound

. Pre

ss a

gain

or

pres

s to

res

tore

so

und

.

Cyc

les

thro

ugh

the

avai

labl

e vi

deo

inpu

ts.

Pres

s on

ce to

sho

w c

urre

nt ti

me,

(if s

et) a

nd c

hann

el n

umbe

r. Pr

ess

agai

n to

act

ivat

e C

APT

ION

VIS

ION

set

ting

s, if

ava

ilabl

e. T

o ca

ncel

, pre

ss a

gain

unt

il D

ISPL

AY

OFF

app

ears

.

Cyc

les

thro

ugh

the

Mul

ti-C

hann

el T

V S

ound

(MT

S) o

ptio

ns:

STE

RE

O, S

AP

(Sec

ond

Aud

io P

rogr

amm

ing)

and

MO

NO

,(K

V-2

0S42

, 20S

43 o

nly)

.

Pre

ss fo

r ch

anne

l sel

ecti

on, t

he c

hann

el w

ill c

hang

e af

ter

2 se

cond

s.

Pre

ss a

fter

sel

ecti

ng a

cha

nnel

usi

ng th

e -

but

tons

to

imm

edia

tely

act

ivat

e se

lect

ion.

Alt

erna

tes

back

and

fort

h be

twee

n th

e la

st tw

o ch

anne

ls s

elec

ted

w

ith

the

- b

utto

ns.

Dis

play

s th

e on

-scr

een

men

u. P

ress

aga

in to

exi

t the

men

u at

any

ti

me.

Act

ivat

es h

ighl

ight

ed s

elec

tion

s in

the

on-s

cree

n m

enu.

Mov

es th

e cu

rsor

in th

e on

-scr

een

men

u.

Pres

s to

res

tore

fact

ory

sett

ings

whi

le in

the

on-s

cree

n m

enu.

Bu

tton

s sh

own

are

for

rem

ote

cont

rol R

M-Y

155,

you

r re

mot

e co

ntro

l m

ay n

ot lo

ok e

xact

ly li

ke t

he o

ne il

lust

rate

d.

-

-

-

-

— 11 —


25

Oth

er In

form

atio

n

Oth

er In

form

atio

nTr

oubl

esho

otin

gIf

you

are

hav

ing

a pr

oble

m w

ith

your

TV,

try

the

sugg

esti

ons

belo

w. I

f th

e pr

oble

m p

ersi

sts,

con

tact

you

r ne

ares

t Son

y d

eale

r.

No

pic

ture

, no

sou

nd

M

ake

sure

the

pow

er c

ord

is p

lugg

ed in

.

If a

red

ligh

t is

flas

hing

on

the

fron

t of y

our

TV

for

mor

e th

an a

few

min

utes

, cal

l you

r lo

cal s

ervi

ce c

ente

r.

Che

ck th

e T

V/

VID

EO

set

ting

s: w

hen

wat

chin

g T

V, s

et

to T

V; w

hen

wat

chin

g vi

deo

equ

ipm

ent,

set t

o V

IDE

O

(pag

e13

).

Che

ck y

our

PAR

EN

TA

L C

ON

TR

OL

set

ting

s, (s

ee

page

s 22

-23)

.

Mak

e su

re th

e ba

tter

ies

have

bee

n in

sert

ed c

orre

ctly

in

to th

e re

mot

e co

ntro

l.

Try

anot

her

chan

nel,

it c

ould

be

stat

ion

trou

ble.

Po

or

or

no

p

ictu

re, g

oo

d

sou

nd

A

dju

st P

ICT

UR

E in

the

VID

EO

men

u (p

age

13).

A

dju

st B

RIG

HT

NE

SS in

the

VID

EO

men

u (p

age

13).

C

heck

the

ante

nna

and

/or

cab

le c

onne

ctio

ns (p

age

3).

Go

od

pic

ture

, n

o s

ou

nd

Pr

ess

so

that

MU

TIN

G d

isap

pear

s fr

om th

e sc

reen

(pag

e9)

.

Che

ck y

our

AU

DIO

set

ting

s. Y

our

TV

may

be

set t

o SA

P (p

age

14).

No

co

lor

A

dju

st C

OL

OR

in th

e V

IDE

O m

enu

(pag

e13

).

On

ly s

no

w

app

ears

on

th

e sc

reen

C

heck

the

CA

BL

E s

etti

ng in

the

SET

UP

men

u (p

age

17).

C

heck

the

ante

nna

and

/or

cab

le c

onne

ctio

ns (p

age

3).

M

ake

sure

the

chan

nel s

elec

ted

is c

urre

ntly

br

oad

cast

ing.

Do

tted

lin

es o

r st

rip

es

Ad

just

the

ante

nna.

M

ove

the

TV

aw

ay fr

om o

ther

ele

ctro

nic

equi

pmen

t. So

me

elec

tron

ic e

quip

men

t can

cre

ate

elec

tric

al n

oise

, w

hich

can

inte

rfer

e w

ith

TV

rec

epti

on.

Do

ub

le im

ages

o

r g

ho

sts

C

heck

you

r ou

tdoo

r an

tenn

a or

cal

l you

r ca

ble

serv

ice.

26 Use

r G

uid

e

If, a

fter

rea

ding

thes

e op

erat

ing

inst

ruct

ions

, you

hav

e ad

diti

onal

que

stio

ns r

elat

ed to

the

use

of y

our

Sony

tele

visi

on, p

leas

e ca

ll ou

r D

irec

t Res

pons

e C

ente

r at

1-8

00-2

22-S

ON

Y (7

669)

(U.S

. cus

tom

ers

only

) or

(416

) 499

-SO

NY

(766

9) (C

anad

ian

cust

omer

s on

ly).

Can

no

t rec

eive

h

igh

er n

um

ber

ch

ann

els

(UH

F)

wh

en u

sin

g a

n

ante

nn

a

M

ake

sure

CA

BL

E is

set

to O

FF in

the

SET

UP

men

u (p

age

17).

U

se A

UT

O P

RO

GR

AM

to a

dd

cha

nnel

s th

at a

re n

ot

pres

entl

y in

the

mem

ory

(pag

e17

).

Cab

le s

tati

on

s d

on

’t s

eem

to

w

ork

M

ake

sure

CA

BL

E is

set

to O

N in

the

SET

UP

men

u (p

age

16).

U

se A

UT

O P

RO

GR

AM

to a

dd

cha

nnel

s th

at a

re n

ot

pres

entl

y in

the

mem

ory

(pag

e17

).

Rem

ote

co

ntr

ol

do

es n

ot

op

erat

e

B

atte

ries

cou

ld b

e w

eak.

Rep

lace

them

(pag

e2)

.

Mov

e th

e T

V 3

-4 fe

et a

way

from

fluo

resc

ent l

ight

s.

Th

e T

V n

eed

s to

be

clea

ned

Cle

an th

e T

V w

ith

a so

ft d

ry c

loth

. Nev

er u

se s

tron

g so

lven

ts s

uch

as th

inne

r or

ben

zine

, whi

ch m

ight

d

amag

e th

e fi

nish

of t

he c

abin

et.

Lo

st p

assw

ord

fo

r P

AR

EN

TAL

CO

NT

RO

L

In

the

pass

wor

d s

cree

n, e

nter

the

follo

win

g m

aste

r pa

ssw

ord

: 435

7. A

fter

usi

ng th

e m

aste

r pa

ssw

ord

, you

m

ust c

reat

e a

new

pas

swor

d, i

t can

not b

e us

ed to

un

lock

cur

rent

ly b

lock

ed p

rogr

ams.

— 12 —

KV-21ME43KV-21ME43KV-21ME43KV-21ME43KV-21ME43SECTION 2SECTION 2SECTION 2SECTION 2SECTION 2

DISASSEMBLDISASSEMBLDISASSEMBLDISASSEMBLDISASSEMBLYYYYY

2-1. REAR COVER REMOV2-1. REAR COVER REMOV2-1. REAR COVER REMOV2-1. REAR COVER REMOV2-1. REAR COVER REMOVALALALALAL

2-2. 2-2. 2-2. 2-2. 2-2. AAAAA BOARD REMOV BOARD REMOV BOARD REMOV BOARD REMOV BOARD REMOVALALALALAL 2-3. SER2-3. SER2-3. SER2-3. SER2-3. SERVICE POSITIONVICE POSITIONVICE POSITIONVICE POSITIONVICE POSITION

Rear Cover

Four Screws(BVTP 4x16)

C BoardClaw

A Board

A Board

C Board

— 13 —


2-4. PICTURE TUBE REMOV2-4. PICTURE TUBE REMOV2-4. PICTURE TUBE REMOV2-4. PICTURE TUBE REMOV2-4. PICTURE TUBE REMOVALALALALAL

WWWWWARNING:ARNING:ARNING:ARNING:ARNING:BEFORE REMOVINGBEFORE REMOVINGBEFORE REMOVINGBEFORE REMOVINGBEFORE REMOVING

THE THE THE THE THE ANODE CAPANODE CAPANODE CAPANODE CAPANODE CAP

High voltage remains in the CRTeven after the power is disconnected.

To avoid electric shock, dischargeCRT before before before before before attempting to remove theanode cap. Short between anode andCRT coated earth ground strap.

ANODE CAPANODE CAPANODE CAPANODE CAPANODE CAP REMOV REMOV REMOV REMOV REMOVALALALALAL

a

REMOVAL PROCEDURES

HOW TO HANDLE AN ANODE CAP

WARNING: High voltage remains in the CRT even after the power is disconnected. To avoid electrical shock, discharge the CRT beforeattempting to remove the anode cap. Short between anode and coated earth ground strap of CRT.

NOTE: After removing the anode, short circuit the anode of the picture tube and the anode cap to either the metal chassis, CRT shield,or carbon painted on the CRT.

1 Do not use sharp objects which may cause damage to thesurface of the anode cap.

3 Do not force turn the foot of the rubber cover. This may causethe shatter-hook terminal to protrude and damage the rubber.

2 To avoid damaging the anode cap, do not squeeze the rubber covering too hard. A material fitting called a shatter-hook terminalis built into the rubber.

2 Use your thumb to pull the rubbercap firmly in the direction indicatedby arrow b .

3 When one side of the rubber capseparates from the anode button,the anode cap can be removed byturning the rubber cap and pullingit in the direction of arrow c .

1 Turn up one side of the rubber cap inthe direction indicated by arrow a .

b

Anode Button

c

A Board

Cushion

Degaussing Coil

Deflection Yoke

Anode Cap

C Board

Picture Tube

Tension Spring (B) Tuner

Four Tapping Screws

CoatedEarthGroundStrap

— 14 —

KV-21ME43KV-21ME43KV-21ME43KV-21ME43KV-21ME43SECTION 3SECTION 3SECTION 3SECTION 3SECTION 3

SETSETSETSETSET-UP-UP-UP-UP-UP ADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTS

3-1. BEAM LANDING3-1. BEAM LANDING3-1. BEAM LANDING3-1. BEAM LANDING3-1. BEAM LANDINGBefore beginning adjustment procedure:

1. Degauss the entire screen.

2. Feed in the white pattern signal.

Adjustment ProcedureAdjustment ProcedureAdjustment ProcedureAdjustment ProcedureAdjustment Procedure1. Input a raster signal with the pattern generator.

2. Loosen the deflection yoke mounting screw and set thepurity control to the center as shown below.

Purity Control

3. Turn the raster signal of the pattern generator to green.

4. Move the deflection yoke backward and adjust the puritycontrol so that green is in the center and red and blue areat the sides evenly.

Blue Red

Green

5. Move the deflection yoke forward and adjust so that theentire screen becomes green.

6. Switch over the raster signal to red and blue and confirmthe condition.

7. When the position of the deflection yoke is determined,tighten it with the deflection yoke mounting screw.

8. If landing at the corner is not right, adjust by using the diskmagnets.

ba

c d

d

b

c

Purity controlcorrects this area

Disk magnetsor rotatable diskmagnets correctthese areas (a-d)

Deflection yoke positioningcorrects these areas

a

The following adjustments should be made whena complete realignment is required or when a newpicture tube is installed.

These adjustments should be performed with ratedpower supply voltage unless otherwise noted.

Set the controls and switch as follows unlessotherwise noted.

PICTURE control ................. NormalBRIGHTNESS control ......... Normal

Perform the adjustments in order as follows:1. Beam Landing2. Convergence3. Focus4. Screen (G2)5. White Balance

Note:Note:Note:Note:Note: Test equipment required:

• Color bar pattern generator• Degausser• DC power supply• Digital multimeter

— 15 —


3-2. CONVERGENCE3-2. CONVERGENCE3-2. CONVERGENCE3-2. CONVERGENCE3-2. CONVERGENCEBefore starting convergence adjustments:

1. Perform FOCUS, V.LIN AND V.SIZE adjustments.

2. Set BRIGHTNESS control to minimum.

3. Feed in dot pattern.

VVVVVertical Static Convergenceertical Static Convergenceertical Static Convergenceertical Static Convergenceertical Static Convergence1. Adjust V.STAT magnet to converge red, green and blue

dots in the center of the screen (vertical movement).

B

G

RCenter dot

R G B

V.STAT magnet

2. Tilt the V.STAT magnet and adjust static convergenceto open or close the V.STAT magnet.

When the V.STAT magnet is moved in the direction ofarrows and , red, green, and blue dots move as shownbelow:

a

b bB

G

R

a b

B

G

R

aBGR

RGB

b

R

G

B

b

b

a

R

G

B

(1)

(3)

(2)

If the blue dot does not converge with the red and green dots,perform the following:

1. Move BMC magnet (a) to correct insufficient H. Staticconvergence.

2. Rotate BMC magnet (b) to correct insufficient V. Staticconvergence.

3. In either case, repeat Beam Landing Adjustment.

PURITY

V. STAT

BMC MAGNET

b

a

BMC magnet

Dynamic Convergence Dynamic Convergence Dynamic Convergence Dynamic Convergence Dynamic Convergence AdjustmentAdjustmentAdjustmentAdjustmentAdjustmentBefore performing this adjustment, perform Horizontaland Vertical Static Convergence Adjustment.

1. Slightly loosen deflection yoke screw.

2. Remove deflection yoke spacers.

3. Move the deflection yoke for best convergence,as shown below:

R G B B G R

R G B

R

R

R

GB

GB

G

B

R G B

B G RRG

B RGB

B G R R G B

4. Tighten the deflection yoke screw.

5. Install the deflection yoke spacers.

— 16 —


Screen-Corner ConvergenceScreen-Corner ConvergenceScreen-Corner ConvergenceScreen-Corner ConvergenceScreen-Corner Convergence1. Affix a permalloy assembly corresponding to the

misconverged areas.

ba

c d

ab

d

a-d: screen-cornermisconvergence

c

3-3. FOCUS3-3. FOCUS3-3. FOCUS3-3. FOCUS3-3. FOCUS1. Adjust FOCUS control for best picture.

FOCUS

SCREEN

(FV)

(G2)

3-4. SCREEN (G2)3-4. SCREEN (G2)3-4. SCREEN (G2)3-4. SCREEN (G2)3-4. SCREEN (G2)1. Input a dots pattern.

2. Set the PICTURE and BRIGHTNESS controls at minimumand COLOR control at normal.

3. Adjust SBRT, GCUT, BCUT in service mode with anoscilloscope as shown below so that voltages on the red,green, and blue cathodes are 170 VDC.

Pedestal170 VDC Ground

4. Observe the screen and adjust SCREEN (G2) VR to obtainthe faintly visible background of dot signal.

3-5.3-5.3-5.3-5.3-5. METHOD OF SETTING THE SERVICEMETHOD OF SETTING THE SERVICEMETHOD OF SETTING THE SERVICEMETHOD OF SETTING THE SERVICEMETHOD OF SETTING THE SERVICEADJUSTMENT MODEADJUSTMENT MODEADJUSTMENT MODEADJUSTMENT MODEADJUSTMENT MODE

Service Mode ProcedureService Mode ProcedureService Mode ProcedureService Mode ProcedureService Mode Procedure1. Standby mode (power off).

2. Display Channel 5 Sound volume Power ON+

on the Remote Commander (press each button within asecond).

Service Service Service Service Service Adjustment Mode InAdjustment Mode InAdjustment Mode InAdjustment Mode InAdjustment Mode In1. The CRT displays the item being adjusted.

SERVICE HSIZ 0

Disp.(Item)

ItemData

2. Press or on the Remote Commander to select theitem.

3. Press or on the Remote Commander to change thedata.

4. Press then to save into the memory.

Service Service Service Service Service Adjustment Mode MemoryAdjustment Mode MemoryAdjustment Mode MemoryAdjustment Mode MemoryAdjustment Mode MemoryTurn set off then on to exit service adjustment mode.

SERVICE WRITE Green

Red

MUTING

ENTER

3-6. WHITE BALANCE 3-6. WHITE BALANCE 3-6. WHITE BALANCE 3-6. WHITE BALANCE 3-6. WHITE BALANCE ADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTS1. Input an entire white signal.

2. Set to Service Adjustment Mode.

3. Set DCOL to “0”.

4. Set the PICTURE and BRIGHTNESS to minimum.

5. Adjust with SBRT if necessary.

6. Select GCUT and BCUT with and .

7. Adjust with and for the best white balance.

8. Set PICTURE and BRIGHTNESS to maximum.

9. Select GDRV and BDRV with and .

10. Adjust with and for the best white balance.

11. Reset DCOL to “1”.

12. To write into memory, press then .

— 17 —


SECTION 4SECTION 4SECTION 4SECTION 4SECTION 4SAFETYSAFETYSAFETYSAFETYSAFETY RELA RELA RELA RELA RELATED TED TED TED TED ADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTS

4-1.4-1.4-1.4-1.4-1. R582 CONFIRMA R582 CONFIRMA R582 CONFIRMA R582 CONFIRMA R582 CONFIRMATION METHODTION METHODTION METHODTION METHODTION METHOD(HV HOLD-DOWN CONFIRMA(HV HOLD-DOWN CONFIRMA(HV HOLD-DOWN CONFIRMA(HV HOLD-DOWN CONFIRMA(HV HOLD-DOWN CONFIRMATION)TION)TION)TION)TION)AND READJUSTMENTSAND READJUSTMENTSAND READJUSTMENTSAND READJUSTMENTSAND READJUSTMENTS

The following adjustments should always be performed whenreplacing the following components which are marked with

on the schematic diagram.

DYDYDYDYDY, C51, C51, C51, C51, C511, C574, C575, D572, D573, D574, R578,1, C574, C575, D572, D573, D574, R578,1, C574, C575, D572, D573, D574, R578,1, C574, C575, D572, D573, D574, R578,1, C574, C575, D572, D573, D574, R578,R582, R583, R584, R585, R586, R625, R626, R635,R582, R583, R584, R585, R586, R625, R626, R635,R582, R583, R584, R585, R586, R625, R626, R635,R582, R583, R584, R585, R586, R625, R626, R635,R582, R583, R584, R585, R586, R625, R626, R635,R640, T504, IC301, IC521, IC602R640, T504, IC301, IC521, IC602R640, T504, IC301, IC521, IC602R640, T504, IC301, IC521, IC602R640, T504, IC301, IC521, IC602

Preparation Before ConfirmationPreparation Before ConfirmationPreparation Before ConfirmationPreparation Before ConfirmationPreparation Before Confirmation1. Turn the POWER switch ON. Input an entirely white

signal and set the PICTURE and BRIGHTNESS controlsto maximum.

2. Confirm that the voltage between C574 (+) and groundis more than 99.8 VDC when the set is operating normallywith 120-220±VAC.

Hold-down Operation ConfirmationHold-down Operation ConfirmationHold-down Operation ConfirmationHold-down Operation ConfirmationHold-down Operation Confirmation1. Connect the current meter between Pin 11 of the FBT

(T504) and the PCB land where Pin 11 would normallyattach. (See Figure 1 on the following page.)

2. Input a dot signal and set PICTURE and BRIGHTNESSto minimum: IABL = 95 + 100/-95µA.

3. Confirm the voltage of A Board TP-600 is117.0 ± 0.3 VDC.

4. Connect the digital voltmeter and the DC power supplyvia diode 1SS119 to C574 (+) and ground(See Figure 1 on the following page).

5. Increase the DC power voltage gradually until the pictureblanks out.

6. Read the digital voltmeter indication.

7. Turn DC power source off immediately:(standard: less than or equal to 127.3 VDC).

8. Input a white signal and set PICTURE and BRIGHTNESSto maximum: (standard: less than or equal to 127.3 VDC).

9. Repeat steps 4 to 7.

Hold-down ReadjustmentHold-down ReadjustmentHold-down ReadjustmentHold-down ReadjustmentHold-down ReadjustmentIf the setting indicated in step 2 of Hold-down OperationConfirmation cannot be met, readjustment should be performedby altering the resistance value of R582, a component markedwith .

+

I ABL

ABL

T504FBT

Range

-

Ammeter3.0 mA DC

A

4-2.4-2.4-2.4-2.4-2. B+ VOLB+ VOLB+ VOLB+ VOLB+ VOLTTTTTAGE CONFIRMAAGE CONFIRMAAGE CONFIRMAAGE CONFIRMAAGE CONFIRMATION TION TION TION TION ANDANDANDANDANDADJUSTMENTADJUSTMENTADJUSTMENTADJUSTMENTADJUSTMENT

Note: The following adjustments should always be performedwhen replacing the following components, which are markedwith on the schematic diagram.

IC001, IC602, R030, R625, R626, R632, R633, R635,IC001, IC602, R030, R625, R626, R632, R633, R635,IC001, IC602, R030, R625, R626, R632, R633, R635,IC001, IC602, R030, R625, R626, R632, R633, R635,IC001, IC602, R030, R625, R626, R632, R633, R635,R636, R637, R638, R639R636, R637, R638, R639R636, R637, R638, R639R636, R637, R638, R639R636, R637, R638, R639

1. Supply 120-220±VAC to the set with a variable autotransformer.

2. Input a dot signal.

3. Set the PICTURE and BRIGHTNESS controls to minimum.


5. Select PADJ with and .

6. Adjust with to the 0 level.

7. Confirm the voltage of A board TP-600 is less than125 VDC.

8. If step 7 is not satisifed, replace the components and repeatthe above steps.

9. Supply 120-220±VAC to the set with a variable autotransformer.

10. Adjust with and for 117.0 ± .3 VDC.


— 18 —


DigitalMultimeter

TP600TP600TP600TP600TP600

Figure 1

R582R582R582R582R582

+–

Ammeter3mA DC Range

ABL1ABL1ABL1ABL1ABL111111

+–

A

T504T504T504T504T504FBTFBTFBTFBTFBT

1SS1191SS1191SS1191SS1191SS119

DigitalMultimeter

PowerSupply

+–

+–

C574C574C574C574C574

— 19 —


5-1. Setting the Service 5-1. Setting the Service 5-1. Setting the Service 5-1. Setting the Service 5-1. Setting the Service Adjustment ModeAdjustment ModeAdjustment ModeAdjustment ModeAdjustment Mode1. Standby mode (power off).

2. Display Channel 5 Sound volume Power ON+

on the Remote Commander (press each button withina second).

Service Service Service Service Service Adjustment Mode OnAdjustment Mode OnAdjustment Mode OnAdjustment Mode OnAdjustment Mode On1. The CRT displays the item being adjusted.

SERVICE HSIZ 0

Disp.(Item)

ItemData

2. Press or on the Remote Commander to selectan item.

3. Press or on the Remote Commander to changethe data.


Service Service Service Service Service Adjustment Mode MemoryAdjustment Mode MemoryAdjustment Mode MemoryAdjustment Mode MemoryAdjustment Mode Memory

SERVICE WRITE Green

Red

MUTING

ENTER

1. Press then on the Remote Commander toinitialize.

SERVICE RESET

2. Turn set off then on to exit service adjustment mode.

SECTION 5SECTION 5SECTION 5SECTION 5SECTION 5CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT ADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTS

Carry out step 1 when adjustingIDs 0–4 and when replacingand adjusting IC003.

5-2. Memory W5-2. Memory W5-2. Memory W5-2. Memory W5-2. Memory Write Confirmation Methodrite Confirmation Methodrite Confirmation Methodrite Confirmation Methodrite Confirmation Method1. After adjustment, remove the power plug from the AC

outlet, then plug it in again.

2. Turn the power switch ON and set to service mode.

3. Call the adjusted items again to confirm they were adjusted.

5-3. 5-3. 5-3. 5-3. 5-3. Adjust Buttons and IndicatorsAdjust Buttons and IndicatorsAdjust Buttons and IndicatorsAdjust Buttons and IndicatorsAdjust Buttons and Indicators

MUTINGSLEEP

POWER

TV/VIDEODISPLAY

1 2 3

4 5 6

7 8 9

0JUMP ENTER

MENU

SELECT

VOL CH

RESET

–

+

POWERService mode

Write into memory

MUTING

Write into memory

3

8

5

61

4

Data up

Data down

Service mode

Initialize

Item up

Item down

VOL(+)Service mode

DISPLAYService mode

–

+

ENTER

MTS

Electrical Electrical Electrical Electrical Electrical Adjustment by Remote CommanderAdjustment by Remote CommanderAdjustment by Remote CommanderAdjustment by Remote CommanderAdjustment by Remote CommanderUse the Remote Commander (RM-Y156) to perform the circuit adjustments in this section.

NOTE: Test Equipment Required:

• Pattern generator• Frequency counter• Digital multimeter• Audio oscillator

RM-Y156RM-Y156RM-Y156RM-Y156RM-Y156

— 20 —

KV-21ME43KV-21ME43KV-21ME43KV-21ME43KV-21ME43 Adjustment ItemsAdjustment ItemsAdjustment ItemsAdjustment ItemsAdjustment Items

NO. ITEM FUNCTIONDATA

RANGE INITIAL DATA AVERAGE DATA

1 HSIZ HORIZONTAL SIZE ADJ. 0-63 31 312 HPOS HORIZONTAL POS. ADJ. 0-63 31 203 VBOW VRT LINE BOWING ADJ. 0-15 7 64 VANG VRT LINE BOW SLANT ADJ. 0-15 7 65 TRAP HORIZ. TRAPEZOID ADJ. 0-15 7 156 PAMP HORIZ. PIN DISTORTION ADJ. 0-63 31 317 CPIN SAME AS PAMP-SCRN TP/BTM 0-63 31 318 VSIZ VERTICAL SIZE ADJ. 0-63 31 379 VPOS VERTICAL POSITION ADJ. 0-63 31 38

10 VLIN VERTICAL LINEARITY ADJ. 0-15 7 711 SCOR VERTICAL “S” CORRECTION ADJ. 0-15 7 712 VZOM 16:9 CRT Z MODE ON/OFF 0, 1 0 013 EHT VRT HI-VOLT. CORRECTION 0-15 7 414 ASP ASPECT RATIO CONTROL 0-63 63 4715 SCRL 16:9 CRT Z MODE TRANS SCROLL 0-63 31 3116 HBLK HORIZONTAL BLANKING ON/OFF 0, 1 0 117 LBLK LEFT BLANKING ADJ. 0-15 7 1518 RBLK RIGHT BLANKING ADJ. 0-15 7 319 VUSN V SAW WAVEFORM COMPRESS 0, 1 0 020 HDW H. DRIVE PULSE WIDTH 0, 1 0 021 EWDC “PARABOLA” EW/DC ADJ. 0, 1 0 022 LVLN LOWER SCREEN BTM VRT LIN ADJ. 0-15 0 023 UVLN UPPER SCREEN BTM VRT LIN ADJ. 0-15 0 024 RDRV R OUTPUT DRIVE CONTROL 0-63 31 2725 GDRV G OUTPUT DRIVE CONTROL 0-63 31 2426 BDRV B OUTPUT DRIVE CONTROL 0-63 31 2727 RCUT R OUTPUT CUTOFF CONTROL 0-15 728 GCUT G OUTPUT CUTOFF CONTROL 0-15 7 629 BCUT B OUTPUT CUTOFF CONTROL 0-15 7 730 DCOL DYNAMIC COLOR ON/OFF 0, 1 0 031 SHUE SUB HUE 0-31 14 1832 SCOL SUB COLOR 0-31 14 1833 SBRT SUB BRIGHTNESS 0-31 14 1034 RON R OUTPUT ON/OFF 0, 1 0 135 GON G OUTPUT ON/OFF 0, 1 0 136 BON B OUTPUT ON/OFF 0, 1 0 137 AXPL AXIS PAL 0, 1 0 038 AXNT AXIS NTSC 0, 1 0 039 CBPF CHROMA BPF ON/OFF 0, 1 0 140 CTRP Y TRAP FILTER ON/OFF 0, 1 0 141 COFF COLOR ON/OFF 0, 1 0 042 KOFF SET COLOR KILLER 0, 1 0 043 SSHP SUB SHARPNESS 0-15 8 644 SHPF SHARPNESS CIRCUIT F0 0, 1 0/0 *2 0/0 *245 PREL PRE/OVR SHOOT SWITCHING 0, 1 0 146 Y-DC DC TRANS RATIO SWITCHING 0, 1 0 147 GAMM GAMMA CORRECTION AMNT 0-3 0 048 ABLM ABL MODE SWITCHING 0, 1 1 149 VTH ABL CD VHT SWITCHING 0, 1 0 150 YDEL Y DELAY TIME CONTROL 0-15 7 751 NCOL NO COLOR ID 0, 1 0 152 FSC FSC OUT ON/OFF 0, 1 0 153 K-ID KILLER ID CONTROL SW 0, 1 0 054 HOSC H VCO OSCILLATION FREQ 0-15 7 755 VSS V SYNC SLICE LEVEL 0, 1 0 056 HSS H SYNC SLICE LEVEL 0, 1 0 057 HMSK H SYNC MASK WIDTH 0, 1 0 158 VTMS SELECT SIGNAL VTIM PIN 0-3 0 059 CDMD V CNT DWN MODE SWITCHING 0-3 0/1 *2 0/1 *260 AFC AFC LOOP GAIN SWITCHING 0-3 0/0 *2 0/0 *261 FIFR FIELD FREQUENCY 0-3 0 362 SBAS SUB BASS 0-15 7 863 STRE 0-15 7 9

10

— 21 —


SERVICE ID0 25

Notes:

No. 1–82 show the order that each adjustment mode may be selected while in service mode.

Data Range shows the range of possible settings for each adjustment mode.

Initial Data shows the standard settings for each adjustment mode.

Feature ID MapFeature ID MapFeature ID MapFeature ID MapFeature ID Map

*2: TV/VIDEO

64 SBAL SUB BALANCE 0-31 14 1365 DISP O.S.D DISPLAY POSITION 0-127 0 566 PADJ POWER ADJUSTMENT 0-63 3 4267 HCHM 0-255 69 6968 HCLM 0-255 16 1669 HCHS 0-255 69 6970 HCLS 0-255 16 1671 PVCH 0-1 0 072 PVON 0-1 0 173 PVLN 0-31 17 1774 PVSB 0-255 64 6475 PVLV 0-255 130 13076 ID1 ID1 0-255 3 See ID Map below77 ID2 ID2 0-255 11 See ID Map below78 ID3 ID3 0-255 1 See ID Map below79 ID4 ID4 0-255 23 See ID Map below80 ID5 ID5 0-255 0 See ID Map below81 ID6 ID6 0-255 0 See ID Map below82 ID7 ID7 0-255 64 See ID Map below

NO. ITEM FUNCTIONDATA

RANGE INITIAL DATA AVERAGE DATA

MODEL DEST. ID-0 ID-1 ID-2 ID-3 ID-4 ID-5 ID-6 ID-7KV-21ME43 E 17 3 0 195 115 1 0 0

— 22 —


5-4. 5-4. 5-4. 5-4. 5-4. AAAAA BOARD BOARD BOARD BOARD BOARD ADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTSADJUSTMENTS

H. Frequency AdjustmentH. Frequency AdjustmentH. Frequency AdjustmentH. Frequency AdjustmentH. Frequency Adjustment1. Input a monoscope signal.


3. Connect a frequency counter to base of Q501(TP-500 H. DRIVE).

4. Select the item of AFC, set to 3 level (free run).

5. Check H. Frequency for the 15735 ± 200 Hz.

6. Select the AFC item again and adjust level to 0.


VVVVV. Frequency . Frequency . Frequency . Frequency . Frequency AdustmentAdustmentAdustmentAdustmentAdustment1. Select video 1 with no signal input.

2. Set the conditions for a standard setting.

3. Connect the frequency counter across TP-508 or CN501VDY (+) pin connector and ground.

4. Check that V. Frequency shows 60 ± 2 Hz.

Sub Contrast Sub Contrast Sub Contrast Sub Contrast Sub Contrast Adjustment (RDRAdjustment (RDRAdjustment (RDRAdjustment (RDRAdjustment (RDRV)V)V)V)V)1. Input a color-bar signal.

2. Set the red color.


4. Select the item DCOL level to 0.

5. Set the conditions as follows:

PICTURE: MAXCOLOR: MIN

BRIGHT: CENTER

R ON: ON (1)G ON: OFF (0)B ON: OFF (0)

SERVICE RON 11: ON0: OFF

6. Connect an oscilloscope probe to CN301 pin (R OUT) and ground.

7. Select RDRV with and .

8. Adjust with and for 1.50 ± 0.1 Vp-p

Black

White

1.70 ± 0.05 Vp-p

9. Reset the item DCOL to 1.


11. Return the following back to normal after adjustment.

PICTURE: MAXCOLOR: CENTER

BRIGHT: CENTER

R ON: ON (1)G ON: OFF (0)B ON: OFF (0)

Display Position Display Position Display Position Display Position Display Position Adjustment (DISP)Adjustment (DISP)Adjustment (DISP)Adjustment (DISP)Adjustment (DISP)1. Input a color-bar signal.


3. Select DISP with and .

4. Adjust with and to adjust characters to the center.


6. Check to see if the text is displayed on the screen.

SERVICE DISP 15

Sub Bright Sub Bright Sub Bright Sub Bright Sub Bright Adjustment (SBRT)Adjustment (SBRT)Adjustment (SBRT)Adjustment (SBRT)Adjustment (SBRT)1. Input a crosshatch signal.


3. Set the PICTURE and BRIGHTNESS to minimum.

4. Select the SBRT item with and .

5. Adjust with and to obtain a faintly visible crosshatch.


Sub Hue, Sub Color Sub Hue, Sub Color Sub Hue, Sub Color Sub Hue, Sub Color Sub Hue, Sub Color Adjustment (SHUE, SCOL)Adjustment (SHUE, SCOL)Adjustment (SHUE, SCOL)Adjustment (SHUE, SCOL)Adjustment (SHUE, SCOL)1. Input a color-bar signal.


3. Select the DCOL item and set the value to 0.

4. Connect a probe to TP47B B-OUT (C Board).

4.1) Decrease SCOL Register -1 step (only for Q, R, S).

5. Measure white V1 & blue V4.

5.1) Increase SCOL Register + 1 step (only for Q, R, S).

6. Reset the DCOL level to 1.


1.50 + 0.1 Vpp

V1 V2 V3 V4STANDARD

V4 - V1 = + 0.20

V3 - V2 = + 0.20

— 23 —


VVVVV. Size . Size . Size . Size . Size Adjustment (VSIZ)Adjustment (VSIZ)Adjustment (VSIZ)Adjustment (VSIZ)Adjustment (VSIZ)1. Input a crosshatch signal.


3. Select the VSIZ item with and .

4. Adjust value of VPOS with and for the best verticalcenter.


VVVVV. Center . Center . Center . Center . Center Adjustment (VPOS)Adjustment (VPOS)Adjustment (VPOS)Adjustment (VPOS)Adjustment (VPOS)1. Input a crosshatch signal.


3. Select the VPOS item with and .

4. Adjust value of VPOS with and for the best verticalcenter.


H. Center H. Center H. Center H. Center H. Center Adjustment (HPOS)Adjustment (HPOS)Adjustment (HPOS)Adjustment (HPOS)Adjustment (HPOS)Perform this adjustment after checking H. Frequency.

1. Input a crosshatch signal.


3. Select the HPOS item with and .

4. Adjust the value of HPOS with and for the besthorizontal center.


VVVVV. Linearity (VLIN), V Correction. Linearity (VLIN), V Correction. Linearity (VLIN), V Correction. Linearity (VLIN), V Correction. Linearity (VLIN), V Correction1. Input a crosshatch signal.

2. V. correction is automatically adjusted from the circuitand should satisfy the conditions below.

Service Adjustment Mode MemoryService Adjustment Mode MemoryService Adjustment Mode MemoryService Adjustment Mode MemoryService Adjustment Mode Memory1. Change the value of the DCOL item to 1.

2. After completing all adjustments, press then .

Read From Memory

SERVICE READ Green

Red

ENTER

0

— 24 —


NOTES:

— 25 —


NOTES:

— 26 —


NOTES:

A Board

C Board

6-3. PRINTED WIRING BOARDS ANDSCHEMATIC DIAGRAMS

• All capacitors are in µF unless otherwise noted.pF: µµF 50 WV or less are not indicated except forelectrolytic and tantalums.

• All electrolytics are 50V unless otherwise specified.

• Indication of resistance, which does not have one forrating electrical power, is as follows:

Pitch: 5mmRating electrical power 1/4W (CHIP: 1/10W)

• All resistors are in ohms.

KΩ = 1000Ω MΩ = 1000KΩ

• : nonflammable resistor

• : fusible resistor

• : internal component

• : panel designation and adjustment for repair

• : earth-ground

• : earth-chassis

• All variable and adjustable resistors have characteristiccurve B, unless otherwise noted.

• The components identified by in this manual have beencarefully factory-selected for each set in order to satisfyregulations regarding X-ray radiation. Should replacementbe required, replace only with the value originally used.

• When replacing components identified by , make thenecessary adjustments indicated. If results do not meetthe specified value, change the component identifiedby and repeat the adjustment until the specified valueis achieved (refer to Safety Related Adjustments onpage 17).

• When replacing parts shown in the table below, be sure toperform the related adjustments.

Part Replaced ( )

DY, C511, C574, C575, D572, D573,D574, R582, R583, R584, R585, R586, R578, R625, R626, R634, R635, T504, IC301, IC521, IC602

Adjustment ( )

HV HOLD-DOWN(R582)

B+ VOLTAGECONFIRMATION

IC001, IC602, R030, R624, R626, R632, R633, R635, R636, R637, R638, R639

• All voltages are in Volts

• Voltage is DC with respect to ground unless otherwisenoted.

• Readings are taken with a 10MΩ digital multimeter.

• Readings are taken with a color-bar signal input.

• Voltage variations may be noted due to normal productiontolerance.

• Circled numbers are waveform references.

• * : cannot be measured

• : B + Line

• ----- : B − Line

• : Signal path

Reference InformationRESISTOR : RN METAL FILM

: RC SOLID: FPRD NON FLAMMABLE CARBON: FUSE NON FLAMMABLE FUSIBLE: RW NON FLAMMABLE WIREWOUND: RS NON FLAMMABLE METAL OXIDE: RB NON FLAMMABLE CEMENT: ADJUSTMENT RESISTOR

COIL : LF-8L MICRO INDUCTORCAPACITOR : TA TANTALUM

: PS STYROL: PP POLYPROPYLENE: PT MYLAR: MPS METALIZED POLYESTER: MPP METALIZED POLYPROPYLENE: ALB BIPOLAR: ALT HIGH TEMPERATURE

: ALR HIGH RIPPLE

The components identified by shading and markare critical for safety. Replace only with the partnumber specified.The symbol (displayed on component side of thecircuit board) indicates fast operating fuse. Replaceonly with fuse of the same rating as marked.

Les composants identifiés per un tramé et une marque sont critiques pour la sécurité. Ne les remplacer que

par une piéce portant le numéro spécifié.Le symbole indique une fusible a action rapide.Doit etre remplacee par une fusible de meme yaleur,comme marque.

Note:

— 28 — — 29 — — 30 —— 27 —

SECTION 6DIAGRAMS


6.1 BLOCK DIAGRAM 6.2 CIRCUIT BOARD LOCATIONS

!

"

!

!!

!!

!!

!!

!!"

!!

!!

!

!

"!

"!!

""!

"!

#

$!

"

"

%

!

&"!

&"!

"

"

!

!

!! '

& !

!

"

"

%

%

%

&!

%

#

&&

&&

!

!

&!

#()

#()

#()

#()

##

!

&#

#**&

&&&+ #

#+&+

&

&&#!!

!

"

&

*

&

!!#

& %

%

&

&

&!

%

&&&

%

!

&

!

"!

"!

#"!

%#

&

&

#

&

%

#&

&

%&

&&

(&)

%

&

%

!!

!

!

()

&$!+

$!! $!

!

!

*

!

!!

"!

#*

!!

"

$"!

!

%

%

"

"

!

!

!

"

&!

"!

!

!

!"

&#!!

!

"

*

!

!*#&**

&++

&

&

&

&

!&,

#

#

$!

!

&

&

&

##

$!

$!

!

$!!

$

*&

%&

$

$

$

%

$! +!

$

&

**

- .

&

#"!*

"!

$"!

$"!

$"!

""*

"

" "

"

(&)

&

*

$!!!!

& !

&

$!

%&

"

()

!!%

A Board

C Board

R640,,,,,

5

SV-10805 BLK

— 31 — — 32 — — 33 — — 34 —

[TUNING CONTROL, Y/C/J, POWER SUPPLY, DEFLECTION, TUNER/IF, AUDIO MTS]

A BOARD: IC541 TDA8172A BOARD: IC541 TDA8172A BOARD: IC541 TDA8172A BOARD: IC541 TDA8172A BOARD: IC541 TDA8172

A BOARD: IC301 CXA2133BSA BOARD: IC301 CXA2133BSA BOARD: IC301 CXA2133BSA BOARD: IC301 CXA2133BSA BOARD: IC301 CXA2133BS

1 2 3 4 5 6 7 8 9 10 11

A

B

C

D

E

F

G

H


I

12

A Board

S007

CN501

Q200

Q201

C212

C209

C207

C573

IC200

IC201

C301

C320

C300

R302

R300

C321

R301

R038

C310

Q301

Q300

IC521

J200

J203

C205

C691

R007

R080

C319

C376

C312

D207

C225

D502

R311

R503

D541

D205

R200

C211

C232

D572

R545

R543

R552

C562

C564

R504

C004

R030

R056

C221

S002

S001

CN401

S003

S004

S005

S006

CN402

C017

C046

C092

R287

Q602

IC541

IC003

CN203

IC401

Q502

R542

T504

R018

R043

R013

R081

R070

R071

CN502

R403

R404

C412

C416

C400

R549

R009

R060

C358

C399

R091

C228

Q354

Q357

R099

R061

C223

Q204

R290

Q203

C652

D300

R576

Q359

Q358

IC302

R361

R377

Q350

C213

Q351

D581

R553

D520

IC001

IC402

C574

D203

D204

D206

D210

C325

C629

C542

C390

D208

D574

L503

X301

R578

R544

R040

R690

R237

R238

Q302

Q205

Q206

Q207

C511

Q202

IC400

C260

C360

C577

C217C215

R388

C234

C214

R234 R247

R378

R376

R639

R533

R534

R532

R535

R240

R382

C216

R364

C311

FB350

Q352

J201

J202

R400

C313

R310

R318

R356

R322

R004

R089

C023

R087

C024

R088

C025

R008

R095

R316

C318

R028

R372

R368

C348

R397

R367

C373

C305

C309

R054

R048

R046

R065

R045

R047

R044

R011

C255

R251

R252

R101

R151

R150

R058

R057

R218

R219

R222

R283

R280

R216

R585

R583

R260

C575

R384

R383

R085

R017

R051

R241

R003

R246

C361

C359 C357 R380 R353

R303

R366

R387

R352

C355

R249

R248

R250

R269

R235

R379

R586

D633D637

R611

D635

R616

R621

D636

T604

R644

D614

R645

CN602

R631

R671

VDR601

RY602

RY601

Q607

Q608

Q601

R682

Q605

IC601

R655

R663

C374

FB602

D611

D634

C656

R657

R624

PH600

D215

C218

L200

D617

T603

L504

D551

R551

L591

R571

C591

R505

T501

C504

C508

C634

R591

C571

R572

R574

R347

D302

D310

Q571

C645

Q501

JR100

R683

R609

C580

R341

C340

L001

L150

L301

L302

L351

D653

C601

R688

R620

C638

C648

R610

C647

C654

D670

C611

R669

FB611

FB604

D603

R674

D610

R654

R634

C604

C603

C602

C605

C664

C666

D665

D666

R665

IC002

R632

Q303

Q340

C237

CN204

CN205

C646

R433

D280

R291

R288

R568

C556

CN550

R325

R662

C613

D609

C520

C641

C617

R295

R640

Q556

R559

R329

R 5 6 7

R565

R 3 4 2

R 3 4 4

Q606

R664

R698

R005

R258

R293

C005

R075

R294

R055

R027

R026

R025

Q390

R390

Q380

C350

R340

C299

R289

C236

R635

CN301C630

R636

R588

R076

R078

C007

R092

R292

Q002

Q305

Q252

Q003

Q001

Q394

C599

JR003

R589

R590

R385

Q393

R077

D620

Q666

R3 91

C616

R073

H D Y +

H D Y +

H D Y -

H D Y -

V D Y -

V D Y +

1

2

3

4

5

67

8

9

10

11

1

2 6

7

1 6

1

19

1

1

111

12 22

B E

C

16

IC301

TP103

+30V

TP101

+9V

AFT

OUT

TP102

DET OUT

TP602

+5V

R OUT

L OUT

TP400

AUDIO VCC

TP500

H.DRIVE

SET+9V

TP601

TP508

V OUT

TP507

V MID

ABL

+13V

HEATER

-13V

200V

TP600

B+

TP505

900V

TP504

180V

TP506

H OUT

TP502

+13V

TP501

-13V

STBY+5V

TP001

TP403

L OUT

R OUT

TP404

VP

HP

SCL

52 50 45 35 30

26

15

1

COLD

48 45 40 25

1510

5

1 20

9 1

12 2

1

3

ROUT

3

46

1

1 6

8

S

G

11

TP605

SET +7.5V

E B

EB

B

E

BE

EB

E B

1 5

BE

BE

1 3

1 3

1-673-985-41

7 12 16 1718 27

AAAAA BOARD LOCA BOARD LOCA BOARD LOCA BOARD LOCA BOARD LOCATION LISTTION LISTTION LISTTION LISTTION LIST

DIODE D601 D-8 TRANSISTORD001 G-10 D602 E-9 Q001 F-10D002 G-11 D603 B-9 Q002 G-9D003 H-8 D611 D-6 Q003 G-9D004 H-8 D613 C-8 Q202 E-7D038 H-10 D614 C-8 Q003 G-9D201 G-3 D615 B-9 Q202 E-7D203 I-11 D616 B-6 Q203 E-9D205 F-3 D617 B-7 Q205 H-6D208 E-9 D631 B-10 Q252 G-9D209 H-11 D632 B-10 Q300 F-8D210 H-2 D633 B-11 Q301 G-8D215 E-6 D634 A-12 Q302 G-7D301 F-3 D635 A-11 Q303 F-3D302 G-8 D636 C-11 Q305 F-9D310 G-8 D637 B-12 Q390 I-6D311 G-8 D638 B-12 Q391 G-7D320 F-8 D650 G-6 Q392 G-8D403 E-10 D653 A-9 Q393 G-8D434 E-30 D670 E-9 Q394 G-8D501 B-4 IC Q501 D-5D502 C-3 IC001 H-9 Q502 B-5D541 E-4 IC002 H-11 Q556 F-8D552 C-3 IC003 I-10 Q571 D-3D561 C-2 IC004 F-12 Q601 E-8D562 C-2 IC201 G-4 Q602 F-9D571 D-3 IC301 G-7 Q605 D-7D572 E-30 IC401 F-6 Q606 F-8D573 E-30 IC521 F-4 Q607 B-11D574 E-4 IC541 D-4 Q608 A-10D581 E-30 IC601 B-8 Q650 G-6

IC602 D-7 Q670 E-9

A BOARD: IC521 NJM4558M-TE2A BOARD: IC521 NJM4558M-TE2A BOARD: IC521 NJM4558M-TE2A BOARD: IC521 NJM4558M-TE2A BOARD: IC521 NJM4558M-TE2

Ø ¿ « $

5

11

13

14

15

17 18 19

22

23

24

40

35

4445 46 1

PHASE DET.<H POSITION><AFC BOW><AFC AMGLE>HPROT<<HNG>>

WIDE SAW FUNC.

<ASPECT><SCROLL><UPPER VLIN><LOWER VLIN><V ZOOM><V UNDER SCAN>

HD GEN.

<HD W>

VD SAW FUNC.<VON> <S CORRECTION><V SIZE> <V LINEARITY><V POSITION> <EHT COMP>

EW PARABOLA FUNC. <H SIZE> <TRAPEZIUM><PIN AMP> <EW DC><CORNERPIN>

IREF REG

VPROT<<VNG>>VM AMP(OFF YS/YM)<VMSW>

DACSW

I2C BUSDECODERSTATUS I/F

Y/C MIXRGB CLAMPCLAMP

DC TRAN<DC TRAN>

VSAW GEN.VTIM

COLOR AMP<COLOR><C OFF>AXIS<AXIS NTSC><AXIS PAL>

EYUV CLAMPYUV SW<YSEL>YUVOUT<YUVOUT>

DPIC<DPIC><AGING>

CLAMPRGB 1/2

ABL/PEAK LIM<ABL MODE><ABL VTH>

AKB<<IKR>>

H TIM GEN.<H BLK><LEFT HBLK><RIGHT HBLK>

HSAW GEN.<HOSC>(ZAP)

AFC<AFC GAIN><FH HIGH><<HLOCK>><<HCENT>>

COUNT DOWN <CD MODE> <INTERLACE>

LINE COUNTERV TIM GEN. <V UNDER SCAN>

SHARPNESS DL SHARPNESS AMP<SHARPNESS> <SHP F0> <PRE/OVER>

V SYNC SEP<VSS>

H SYNC SEP<HSS><H MASK>

TRAP + EQ<TRAP OFF>

ATTCHROMA SW

Y SW

MONITOR SW

VIDEO SW

<VIDEO SEL><S SEL>

Y

COLOR KILLER<<KILLER ID OFF>>

CHROMAAMP

ACC DET.

ACC AMP

CHROMA

BPF<C BPF>

FILTER ALIGNMENTCAL. by fsc

APC<HUE> C VCO DEMOD.

FSC<FSC SW>

YS

1 S

W<

RG

B S

EL>

YM

SW

YS

2 S

WD

YN

AM

IC C

OLO

R<

DY

NA

MIC

C>

GA

MM

A A

MP

<G

AM

MA

>C

LAM

PB

RIG

HT

CO

NT

.<

BR

IGH

T>

DR

IVE

AM

P<

R/G

/B D

RIV

E>

CU

TO

FF

CO

NT

.<

R/G

/B C

UT

OF

F>

R/G

/B B

LK<

PO

N>

<R

/G/B

ON

>

PIC

TU

RE

AM

P<

PIC

TU

RE

>

47 8 39 38 37 36 25262728 29303132

3

21

42

34

10 12 16 3320

2

4

6

7

9

41

43TV/C2 IN

C1 IN

CVBS2/Y2 IN

COMB-C IN

COMB-Y IN

MON OUT

CVBS1/Y1 IN

AF

C F

IL

SC

P

V T

IM

HP

/H

PR

OT

EC

T HD

GN

D1

I RE

F

RE

G

VC

C1

YS

2/Y

M

EW

VD+

VD–

SCL

SDA

R OUT

G OUT

B OUT

IK IN

ABL IN

ABL FIL

B2

IN (

B-Y

OU

T)

YS

1

B1

IN

G1

IN

R1

IN

G2

IN (

R-Y

OU

T)

R2

IN (

YO

UT

)

YU

V S

W

EY

IN

ER

-Y IN

VM

OU

T/

V P

RO

T

EB

-Y IN

AP

ED

Y C

LAM

P

GN

D2

VC

C2

FS

CO

UT

Xta

l

AP

C F

IL

— 35 — — 36 — — 37 — — 38 —


A BOARD TRANSISTORVOLTAGE LIST

All voltages are in V

B C EQ001 4.9 0.7 4.8Q002 0.4 0 0.9Q003 0.4 0 0.9Q202 1.4 0.7 GNDQ203 1.7 GND 0.8Q205 4.5 GND 5.2Q252 0 7.4 0Q300 0.6 0.8 GNDQ301 3.6 1 3.9Q302 3.6 GND 3.9Q303 0.7 0.1 0Q305 3.9 GND 4.4Q390 5.7 9 5Q391 4.5 9.1 3.8Q392 0 GND 2.9Q393 2.3 GND 2.9Q394 2.2 GND 2.9Q501 -0.7 48 GNDQ502 -3.1 111.9 -3.1Q556 2.1 4.4 1.5Q571 110.8 10.7 111.6Q601 0 13 GNDQ602 0.9 3.6 0.4Q605 9.8 10.8 9.1Q606 0.1 3.9 GNDQ608 0.4 1.5 0Q650 5.7 9.1 5.1Q670 0.7 0.1 0

G S DQ607 1.5 0 152.3

A BOARD IC VOLTAGE LIST

All voltages are in V

IC001 IC002 IC301 IC541PIN VOLT PIN VOLT PIN VOLT PIN VOLT1 0.9 1 7 20 2.6 1 2.62 4.9 2 GND 21 1 2 12.93 0.5 3 5.4 22 1.5 3 -11.14 2 4 GND 23 1.5 4 -12.95 0 5 GND 24 1.5 5 06 0.1 6 4.9 25 NC 6 13.67 0 7 GND 26 NC 7 2.48 NC 8 4.9 27 NC IC6019 NC IC003 28 NC PIN VOLT

10 0 PIN VOLT 29 0 1 -55.311 0.1 1 GND 30 4.6 2 -57.212 4.9 2 GND 31 4.6 3 94.813 0 3 GND 32 4.6 4 -41.614 4.9 4 GND 33 9 5 -57.115 4.9 5 4.8 34 4.9 IC60216 -0.1 6 4.8 35 4.9 PIN VOLT17 -0.3 7 GND 36 NC 1 2.518 4.9 8 5 37 NC 2 GND19 4.9 IC004 38 NC 3 10.920 1.8 PIN VOLT 39 NC21 0 1 4.9 40 GND22 2.2 2 4.9 41 5.323 0 3 GND 42 7.224 2.2 IC201 43 5.525 2.3 PIN VOLT 44 9.126 GND 1 5.9 45 5.327 4.9 2 0.2 46 NC28 NC 3 6.1 47 1.929 NC 4 0.2 48 NC30 4.9 5 6.1 IC40131 4.9 6 9.1 PIN VOLT32 NC 7 5.3 1 0.833 4.9 8 GND 2 NC34 2.6 IC301 3 2.435 0 PIN VOLT 4 12.636 4.9 1 3.4 5 2.437 4.9 2 NC 6 GND38 4.9 3 1.3 7 0.839 4.8 4 5.3 8 6.540 0 5 4.9 9 GND41 0 6 4.5 10 6.542 0.1 7 NC 11 6.543 4.9 8 5.1 12 GND44 0.1 9 NC 13 6.545 4.9 10 GND IC52146 4.9 11 NC PIN VOLT47 0 12 2.4 1 NC48 0 13 3.5 2 NC49 0 14 3.5 3 NC50 0 15 NC 4 GND51 0 16 7.6 5 8.652 0 17 NC 6 9.8

18 0.8 7 1.319 3 8 12.9

6 8

53.4 Vp-p (V)

1.4 Vp-p (V) 1.4 Vp-p (V)

110.5 Vp-p (H)

2.8 Vp-p (H) 91.3 Vp-p (H) 25.0 Vp-p (H)

3.0 Vp-p (H)3.4 Vp-p (H)

1.05 KVp-p (H)

29.4 Vp-p (V). 6.1 Vp-p (V)

10 12

1413 15 16

17 18 2019

21

4.9 Vp-p (H) 4.2 Vp-p (H)

4

7

1 3

1.0 Vp-p (H)

2.7 Vp-p (H)

11

2

3.6 Vp-p (8MHz)

5

2.0 Vp-p (H)

TV IN

9

A BOARD WAVEFORMS

4.5 Vp-p (V)

30.3 Vp-p (V).

8.6 Vp-p (V)

A BOARD SCHEMATIC DIAGRAM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

A

B

C

D

E

F

G

H

I

16 17 18 19

J

K

L

M

N

1 2 3 4 5 6 7 8 910 11 12 13 14 15 16 17 18 19 20 21 22 23 24

252627282930313233343536373839404142434445464748

1

2

3

4

5

6

1

2

1 2 3 4 5 6 7

123

1

2

1

2

3

12 12

12

34

56

78

910

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

1234

30V

5V

CLOCK

DATA

ENABLE

RF AGC

IF OUT

9V

AFT OUT

NC

NC

VOL CONT

AF OUT

AF IN

DE-EM OUT

MUTE

DET OUT

9V

1

3

2

4

6

12

34 5

67

8

1 2 3 4 5 6 7 8 910 11 12 13

1

2

3

4

5

6

1

23

4

1

2

3

4

5

12345

12

34 5

67

8

12

34 5

67

8

1 2 3 4

5678

1

3

4

5

6 8

9

2

10

11

S

2

3

4

5

7

8

9

10

11

12

14

15

13

1

2

4

3

C692

CN203

C046

C038

C691

R253

C576

C562

C564

IC541

CN402

C531

L591

Q501

C004

C629

C218

C221

C306

D541

D552

D561

D562

D574

L504

T601

C150

C200

R544

R546

C509

C151

C376

C653

C375

D201

D611

Q300

FB501

D650

D205

Q601

D208

Q571

IC201

IC602

C552

C553

D302

Q305

D573

CN501

R553

Q203

J400

X301

C502

C508

Q205

R254

R392

Q391

R393

C001

C008

C010

C017

C019

C020

C028

C034

C047

C060

C062

C091C092

C101

C201

C217

C219

C222

C228

C232

C301

C308

C310

C311

C313

C319

C330C390

C542

C543

C575

C626

C690

C693

R002

R009

R013

R016

R017

R018

R020R021 R022 R023

R030

R031

R038

R043

R046

R048

R049

R085

R087

R088

R089

R101

R150

R151R201

R239

R240R251

R255

R257

R290

R306

R310

R312

R313

R315

R316

R319

R324

R356

R501

R532

R535

R541R542

R543

R547

R549

R552

R573

R576

R579

R583

R625

R626

R649

R650

Q392

Q393

Q394

R383R384 R385

Q301

R321

R322

Q302

C651

C160

R065

R066

D571

D572

D581

R641

C050

IC521

C039

R252

C303

C573

C574

R575

R584

C215

R008

R054

C065

C316

C317

C318

R256

Q605

C577

R025

R026

R040

R280

R548

R318

R311

R329

R580

C077

R586

L001

L150

L151

L160

L302

L301

CN601

R620

D601

R682

R643

R659

FB600

FB601

FB602

D615

D613

D614

D602

PH600

R648

R634

C632

C623

R623

R637

R639

R640

R635

C630

D632D631

Q607

R616Q608

R617

D634 D635

C614

D637

C656

C650

R603

T604

D636

C654

D653

FB611

D616

C657

FB605

FB606

D617

L200

R647

FB609

C622

R656

C620

R674

C621

R657

R675

Q670

R670

R671 C633

R609

R614

R632

R028

D633

T501

C236

R295

Q252

R289

R644

IC002

C556

Q556

C561

R568

R565

R560

R567

R566

C646

D320

RY602

D670

D434

R293

D638

D603

IC003

C243

D502

L503

R055

X001

R050

R390

Q390

R391

C007

C006

R077

R076

Q001

R075

C005 R074

R096

C055

Q002

Q003

R097

R078

R092

R001

R005

R093

R394

CN301

CN502

Q606

Q650

R660

IC004

CN602

IC001

R679

R073

R602 R633

L002

C013

C014

D003

C037

C030

C048

C074

C203

C205

C204

C216

C220

C226

C234

C305

C309

C312

C314

C320

C321

C374

C418

C504

C505

C507

C511

C541

C563

C571

C591

C601

C602C603

C604 C605

C611

C613

C618

C628

C631

C634

C641

C643

C645

C647

C648

D001

D002

D203D209

D210

D301

D310

D311

D403

D501

F601

IC401

IC601

CN401

L003

PS201

Q303

R003

R007

R019

R027

C012

R044

R032

R033

C011

R058

R057

R072

R086

R090

R099

R204

R205

R237

R238

R242

R243

R269

R284

R298

R301

R304

R307

R308

R309

R314

R317

R323

R325

R331

R347

R508

R533

R534

R559

R561

R562

R571

R572R574

R577

R578

R582

R585

R608

R611

R610

R612

R636

R638

Q602

R651

R655

R661

R662

R663

R664

R672

R683

R688

RY601

S001

S007S006S002S005 S004 S003

T504

T603

THP601

VDR601

JW203

JW510 JW511

JW690

JW691

R061

R060

R504

R698

IC301

C644

R291

D215

R245

R235

R231

R260 R261

R262

C260

Q202

C072

C027

D004

R004

R045

R047

R091

TU101

C373

R330

FB604

R631

R630

C638

R591

J201

J202

Q502

R400

R432

R433

R502

R056

D038

15k

2W

:RS

47

25V

:CI

470

25V

:CI

47

25V

:CI

470

16V

:CI

47

25V

:CI

470

25V

:CI

470

25V

:CI

0.1

25V

B:CC-CP

0.1

25V

F:CC-CP

47

25V

:CI

0.015

200V

:CA

0.015

200V

:CA

330p

2kV

:CC

0.068

200V

:CA

220p

500V

B:CC

10

250V

:CI

470

25V

:CI

470

25V

:CI

33

160V

:CI

100

25V

:CI

47

25V

:CI

470

25V

:CI

47

25V

:CI

MTZJ-T-77-5.1C

:40

4.7

2W

:RS

470

2W

:RS

47

1/2W

:RD

0.001 B:CC-CP

0.001 B:CC-CP

1

:CI

560p CH:CC-CP

0.1

:CQ

470p B:CC-CP

0.022

B:CC-CP

220p

CH:CC-CP

470p B:CC-CP

0.0022 B:CC-CP

4.7

:CI

1

:CI

0.47

:CI

0.1

:CQ

10

:CI

10

:CI

1

:CI

18p

CH:CC-CP

10

:CI

1

:CI

0.01

B:CC-CP

4.7

:CI

10k

:RD

220 :RD

22k :RD

470 :RD

1k :RD

6.8k

:RD

680

:RD

820

:RD

2.2k

:RD

10k

:RD

1k

:RD

220

:RD

1k

:RD

10k

:RN-CP

220

:RD

220 :RD

4.7k

:RD

680

:RD

:SV

100

16V

:CI

100

16V

:CI

0.45UH

:E

:F

:F

:LFT

MTZJ-T-77-30D

:40

GP08DPKG23

:4A

RGP10GPKG23

:4G

RGP15GPKG23

:4G

RGP15GPKG23

:4G

:HD

MTZJ-T-77-8.2B

:40

100p

CH:CC-CP

470k

:ZZ-CP

680

:ZZ-CP

1k :ZZ-CP

220 :ZZ-CP

100 :ZZ-CP

47k :ZZ-CP

220

:ZZ-CP

220

:ZZ-CP

10k

:ZZ-CP

680

:ZZ-CP

680

:ZZ-CP

680

:ZZ-CP

10k

:ZZ-CP100

:ZZ-CP

100

:ZZ-CP

470k

:ZZ-CP

470

:ZZ-CP

100

:ZZ-CP

100 :ZZ-CP

10k

:ZZ-CP

100

:ZZ-CP

220

:ZZ-CP

100

:ZZ-CP

10k

:ZZ-CP

6.8k

:ZZ-CP

10k

:ZZ-CP

2.2k

:ZZ-CP

2.2k

:ZZ-CP

2.2k

:ZZ-CP

100

:ZZ-CP

1k

:ZZ-CP

10k :ZZ-CP

4.7

3W

:RS

4.7

160V

:CI

10

:CI

15pF

CH:CC-CP

15pF

CH:CC-CP

10

25V

:CG

0.22

:CI

10

:CI

4P

:ZZZ

2P

:ZZZ

NJM2521M-TE1

:HT

NJM4558M-TE2

:HA

TDA8172

:HN

JACK

:HJP-S

470

:ZZ-CP

220

:ZZ-CP

10k :ZZ-CP

1000p B:CC-CP

0.01

B:CC-CP

0.01

B:CC-CP

0.01

B:CC-CP

2SD2137-OP-TA

:1D

4.7k

:RD

5.6k :RD

5.6k :RD

470 :RD

75

:ZZ-CP

100

0

100p

CH:CC-CP

6.8k

CHIP

1.1

1.1

10k

330

JW(5mm)

470p

680

JW (5MM)

1k CHIP

0.01

CHIP

0

CHIP

0

CHIP

NJM78LR05

MTZJ-T-77-10B

:40

MTZJ-T-77-10B

:40

1SS133T-77

:4A

1SS133T-77

:4A

1SS133T-77

:4A

1SS133T

MTZJ-T-77-10B

:40

2SC3311A

:1B

220p 500V B:CC

10k

0.001

50V

470p

50V

0.001

50V

0.01

50V

0.47

50V

:CI

0.01

50V

B

1000

25V

47

50V

10

450V

0.001

50V

22

50V

680p

500V

B

0.47

50V

:CI

0.47

50V

:CQ

S3L20UF4

S2L20UF

ERC04-06S ERC04-06S

ERA22-08TP3

1SS133T-77 1SS133T-77

MTZJ-T-77-6.2C

RU4AM-T3

1.1UH

1.1UH

1.1UH

0UH

1.1UH

PC123FY2

2SK2845-LB102

2SC3311A-QRSTA

2SD774-T-34

470k

1/4W

2.2k 1/4W

10k

1/4W

6.8

1/2W

680

1/4W

2.2k

1/4W

:RN

100k

1/4W

:RN

10k

1/10W

1k

1/4W

10k

1/10W

10k

1/10W47k

1/10W

47k

1/10W

4.7k

1/10W

1.2k 1/4W

33

1/2W

2.2k

1/4W

470

1/4W

:RD

1.5k

1/4W

3.3k 1/4W

2.2k

1/4W

1k

1/4W

4.7k

1/10W

D1N20R-TA

M24C04-MN6T

1SS133

MTZJ-T-77-5.6C

:40

1SS133T-77

:HDT

0.0047

CHIP

:CHIP

:CHIP

:CHIP

:CHIP

:CHIP

220p

50V

CH:CC-CP

0.01

50V

B:CC-CP

680p

50V

B:CC-CP

0.1

50V

:CQ

47

50V

:CI

0.22

50V

:CQ

0.01

50V

B:CC-CP

0.47

50V

:CI

2P

UDZ-TE-17-5.1B

D3SB60F

2SC3209LK-TP

:1B

220

1/10W

1k

1/10W

:ZZ-CP

10k

1/10W

2.2k

1/10W

:ZZ-CP

2.2k

1/4W

:RD

4.7k

1/10W

:ZZ-CP

10k

1/4W

:RD

10k

1/4W

:RD

2.2

1/4W

:RD

4.7k

1/4W

:RD

2.2M

1/2W

1.8

10W

0.0022

50V

B

4.7

50V

:CI

RGP10GPKG23

3.3mH

2SA1091O-TPE2

:0B

4.7k

1/4W

:RN

100k

1/4W

:RD

220k

1/4W

:RD

68k

1/10W

22k

1/10W

15k

1/10W

4.7k

1/10W

1M

1/10W

470k

1/4W

:RD330k

1/4W

:RD

100k

1/4W

:RD

620

1/10W

:ZZ-CP

100k

1/10W

:ZZ-CP

10k

1/10W

:ZZ-CP

10k :RD

100

CHIP

0.047

100k

CHIP

10k

CHIP

1 10k

CHIP

2.2k

CHIP

100p CHIP

10k

1k

CHIP

1k

CHIP

10k

CHIP

220 CHIP

4.7k

100

5P:S-MICRO

6P

:S-MICRO

2SD1292-T103

2SD1292-T103

0.47

1/2W

M37273MF-255

470

3.3

4.7 1/4W

33k

1/4W

:RN

:CHIP

EGP20DPKG23

:4G

220p

50V

CH

6P

:ZZZ

2P

1M

1/10W

1k

1/10W

2SB709A-QRS-TX

2SD601A

2SD601A

2SB709A

:0B

2SB709A

:0B

2SD601A

2SD601A-QRS-TX

:1B

2SB709A

:0B

2SB709A

:0B

2SB709A

:0B

2SD601A-QRS-TX

2SD601A

:1B

2SB709A

:0B

2SB709A

:0B

2SB709A

:0B

2SD601A-QRS-TX

22

1W

IC SBX3081-71

220p CH

0.1 25V B:CC-CP

1SS133T-77 :4A

0.0022 B:CC-CP

220p CH:CC-CP

0.001 B:CC-CP

100p CH:CC-CP

0.001

B:CC-CP

1

10

25V

0.47

470

25V

4.7

160V

:CI

10

0.1

25V

B:CC-CP

0.01

CHIP

1000

25V

0.001

CHIP

0.47

470pF

470

16V

:CI

10

470p

500V

B:CC

2000pF

1.2kV

3900pF

1.2kV

0.33

250V

220

:CI

0.0047

200V

22 :CI

0.01 100V

0.47 125V

4700pF

250V

4700pF

250V

4700pF

250V

4700pF

250V

1000p

2kV

470

250V

680p

1.5kV

100

25V

2200

16V

100

160V

680p

500V

4700p 250V E

0.01

250V

470p

0.001 500V B

MTZJ-T-77-5.1C

:40

LED UNIT

STAND-BY/TIMER

MTZ-T-77-10B

:40

MTZJ-T-77-10B

:40

MTZJ-T-77-10B

MTZJ-T-77-8.2B

MA111-TX

MA111-TX

1SS133 :4A

ERC06-15S

IC TDA7057AQ/N2

IC STR-F6624

2P

:CHIP

2SC3311A

220 :ZZ-CP

100 :ZZ-CP

4.7k :RD

5.6k :RD

0.001 B:CHIP

220 :ZZ-CP

220 :ZZ-CP

220 :RD

0.001 B:CHIP

4.7k :ZZ-CP

4.7k :ZZ-CP

220

10k

:ZZ-CP

10k

:RD

4.7k :RD

75

:CHIP

470k

220

1k

22k

33k

3.3k

:CHIP

0

100

1/10W

0 :RT

10k :ZZ-CP

4.7k

:CHIP

220k

22k

220 :RD

2.2k

680

100k

100

:ZZ-CP

680 1/10W :ZZ-CP

150

1W

47k

22k

150k 1/10W

1

1W

1

1W

1 2W :RS

2.2k

1/4W

1k

1/4W

18k

56k

2W

68k

:CHIP

33k

22M 1/2W

47k 1/4W

1k 1/4W

680 1/4W

4.7k

22k

2SD601A

4.7M

1/2W

0.22

2W

5.6k

3W

0.47

1/4W

1

2W

390k

5.6k

3W

2.2k 1/4W

5.6k

3W

POWER

PU-Z

DEMO

PU-Z

TV/V

:PU-Z

CH+:

PU-Z

VOL-

:PU-Z

VOL+:

PU-Z

CH-

:PU-Z

ENE271D-10A

(7.5MM)

(12.5MM) (12.5MM)

(5.0MM)

(5.0MM)

JW

(5.0MM)

JW

(5.0MM)

JW

(7.5MM)

JW (5.0MM)

CXA2133BS

Y.CHROMA.JUNGLE

4700p

250V

E

8.2k

MTZJ-T-7710B

0

3.3k

:CHIP

10k :CHIP

100k 100k

100

1

2SD601A-QRS-TX

220p CH:CC-CP

220p

CH:CC-CP

1SS133T-77

10k

4.7k

4.7k

10k

FSS BTF-FA402

0.1 25V

100

:ZZ-CP

1.1UH

10k 1/4W :RD

2.2k 1/4W :RD

0.47 125V

10

2W

2P

REAR A/V

2P

FRONT A/V

2SD2624

22k

12k

12k

4.7k

3W

4.7k :RD

MTZJ-T-77-5.6C

:40

9V

SET-5V

SET 9V

HP

MUTE

VP

VOL 5V

9V

SDA

HP

VIDEOVIDEO

VO

V1

R

G

B

+B

AUDIO VCC

AUDIO VCC

VP

+B

9V

TV

V2

TV

AUDIO VCC

R

B

G

9V

HP

VOL 5V

+B

12V

12V

SYBY+5

H DY +

H DY -

V DY -

V DY +

H DY -

H DY +

OUT

SP L +

SP L -

FV

HV

V OUT

V MID

FBT

RF-AGC

SP901

(R)

15

10 15

SP902

<TUNING CONTROL>

E

AC

AC

DGC

DGC

20V ONLY

I-HP

I-CVIN

I-CNVSS

I-DSC

O-OSC

Vss

O-R

O-G

O-B

O-OSDBLK

IO-BDAT

I-RESET

Vcc

B INT

B DAT

B CLK

(L/MONO)

G2

H.DY H.DY V.DY V.DY

200V

115V

115V

ABL

H

H

< F O R J I G >

F O C U S

H V

( 2 0 V O N L Y )

G 2 ( 2 0 V O N L Y )

Y/C/J

POWER SUPPLY

TUNER/IF

AUDIO

MTS

C O N T R O L

T U N I N G S Y S T E M

I O - S D A T

I - V H O L D

TO AC

CONNECTOR

TO

DGC

AO

A1

A2

VSS

VDD

B-CLK

B-DAT

O - V 1

V

5

6

9

8

7

2

4

1

0

0

V

1 1

S1

S2

GND

L-OUT

V+

TV-L

V1-L

V2-L

S E T + 9 V

H . D R I V E

D E T O U T

1 8 0 V

B L U E O U T

H O U T

M O N O

DEFLECTION

DRIVE+

BOOST

DRIVE-

VCC+

VCC-

OUT1

IN-1

IN+1

-VCC

+VCC

OUT2

IN-2

IN+2

APED

EW

SCL

SDA

EYIN

ABLFIL

VC1

NC

VI 1

VCC

VI 2

S GND

VC 2

OUT 2+

PGND 2

OUT 2-

OUT 1-

PGND 1

OUT 1+

SP R +

SP R -

SCP

+B

AUDIO VCC

S T B Y + 5 V

- 1 3 V

+ 1 3 V

H . P R O T

REF

E

HEATER

I - V P N

O - V O L

O - A D J

O - M U T E

I - R M C N

I - H S Y N C

I - P R O T

I - P O W E R N

I - H L F

O - L E D

I - A V C C

I - K E Y

O - D G C

I - A F T

O - Y M

O - S A P

O - V 0

O - C H B L K 1

I - B I N T N

I - S T E R E N

0 - M O N O

I O - B C L K N

I O - S C L K N

N C

T P 1 0 0

T P 1 0 1

T P 1 0 2

T P 6 0 2

T P 0 0 1

T P 3 0 0

T P 5 0 7

T P 5 0 6

T P 5 0 4

T P 5 0 1

T P 5 0 2

T P 5 0 3

T P 6 0 1T P 5 0 0

T P 4 0 0

C1

ABLIN

CVBS1/Y1

VTIM

MONOUT

COMB C

YCLAMP

COMB Y

GND1

IREF

VD+

VD-

VM

REG

HP/PROTECT

HD

AFCFIL

IKIN

ROUT

GOUT

BOUT

XTAL1

XTAL2

XTAL3

APCFIL

VCC2

TV/C2

CVBS2/Y2

GND2

EB-YIN

ER-YIN

YUVSW

VCC1

R2IN

G2IN

B2IN

YS2/YM

R1IN

G1IN

B1IN

YS1

O - R E L A Y

0 - S P S W

O - S R S 1

0 - S R S 2

I - A F T 2

I - S S W

0 - B B E / M B

0 - A N T S W

INPUT

N/C

CD

N/C

GND

RESET

N/C

OUTPUT

E

B

G

R

1K

NC

200V

NC

0 - A G C M U T E

O - V M L V

0 - H S Y N C S W

0 - M A R K E R

A

A

T P 5 0 8

DGC

DGC

AC

IN

TO C BOARD

CN1751

TO C BOARD

CN1752

B A 4 D 1 0 8 0 5 A

9V

12V

12V

9V

9V

9V

9V

30V

+B

7.5V

VIDEO

AUDIO

AUDIO

AUDIO

AUDIO

AUDIO

AUDIO AUDIO

AUDIO

VIDEO

VIDEO

VIDEO

AUDIO

B

G

R

R

G

B

R G B

B

G

R

VIDEO

VIDEO

VIDEO

12V

AUDIO VCC

STBY+5V

7.5V

+13V

+B

+B

+B

12V

+B

SET-5V

+B

STBY+5V

S E T - 5 V

+5V

9V

9V

9V

+B

1

2

3

4

5

67

8

9

1 01 1

1 2

1 3

1 4

1 6

1 5

1 71 8 1 9

2 0

2 1

R582 SEE PAGES 17 AND 18

AUDIO VCC

STBY+5V

12V

9V

9V

WHEN REPLACING T504 BE SURE TO CHECK THE VOLTAGE VALUE

AT (TP503). REFER TO THE SAFETY ADJUSTMENT SECTION.

AUDIO

AUDIO

AUDIO

A Board


C Board

C BOARD WAVEFORMS

1 2 3

148.4V p-p (H) 118.8V p-p (H) 122.5V p-p (H)

2SA10912SD1292

2SK28452SB7092SD601A

2SC32092SD7742SC5426

2SC3311A

2SD2137

1SS133T-77D1NS4-TAD1N20R-TARD3.3ES-T1B

D3SB60F ERC04-06SMTZJ-T-77-5.1CMTZJ-T-77-5.6CMTZJ-T-77-6.2CMTZJ-T-77-8.2BMTZJ-T-77-10BMTZJ-T-77-30DS2L20UFS3L20UF4RU-1PUDZ-TE-17-5.1B

1SS83TDD1NL20U-TAEL1Z-V1ERA22-08TP3EZ0150AV1RGP10GPKG23GP08DPKG23

MA111-TX RU4AM-T3

EBC

EBC

EBC

EBC

E

B

C

E

LETTER SIDE

C B

S

D

G

CATHODE

ANODE

CATHODE

ANODE

CATHODE

ANODE

CATHODE

ANODE

CATHODE

ANODE

6-4. SEMICONDUCTORS6-4. SEMICONDUCTORS6-4. SEMICONDUCTORS6-4. SEMICONDUCTORS6-4. SEMICONDUCTORS

23

1413

26

20

21

15 16

27

28

29

11

12

10

9

81010

24

25

4

5

1

72

3

18

18

REFREFREFREFREF.NO..NO..NO..NO..NO. PPPPPART NO.ART NO.ART NO.ART NO.ART NO. DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION REMARKREMARKREMARKREMARKREMARK REFREFREFREFREF.NO..NO..NO..NO..NO. PPPPPART NO.ART NO.ART NO.ART NO.ART NO. DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION REMARKREMARKREMARKREMARKREMARK

1 X-4038-672-1 BEZNET ASSY 2-52 4-062-604-31 DOOR3 4-062-603-31 BUTTON, MULTI4 4-062-607-01 GUIDE, LED5 4-046-161-01 EMBLEM (NO.8), SONY

7 ! 8-738-842-05 CRT 21NXT (A51LDG51X)8 1-452-277-00 MAGNET, BMC9 8-451-440-21 DY Y21NXA-X10 4-053-005-01 SPACER, DY11 3-704-372-71 HOLDER, HV CABLE

12* A-1331-917-A C BOARD, MOUNTED13* 4-375-394-01 SPRING, TENSION14* ! 1-416-572-21 COIL, DEMAGNETIC15* A-1299-446-A A BOARD, COMPLETE

The high-voltage leads associated with the FBT on this

board are not included and must be ordered separately (See 27-29)

16 ! 1-751-057-11 CORD, POWER (WITH CONNECTOR) 10A/125V18 1-505-831-11 SPEAKER (9X5CM)20 ! 1-693-454-12 TUNER, FSS BTF-FA40221 1-766-374-11 PLUG, F-PIN23 4-081-410-01 COVER, REAR

24 4-051-735-42 PIECE A(75), CONV. CORRECT25 1-452-032-00 MAGNET,DISC26 ! 1-453-238-21 FBT ASSY, NX-1744//X4E4 27-2927 1-251-643-41 CAP ASSY, HIGH-VOLTAGE28 1-900-803-22 WIRE ASSY, G2 LEAD29 1-900-800-65 CONNECTOR ASSY, FOCUS LEAD

7-685-648-79 SCREW +BVTP 3X12 TYPE2 IT-37-685-663-79 SCREW + BVTP4X16 TYPE2 N-S4-365-808-01 SCREW (5), TAPPING

7-1. CHASSIS7-1. CHASSIS7-1. CHASSIS7-1. CHASSIS7-1. CHASSIS

• Items with no part number and no de-scription are not stocked because theyare seldom required for routine service.

• The component parts of an assemblyare indicated by the reference numbers inthe remarks column.

• Items marked “ * “ are not stocked sincethey are seldom required for routine ser-vice. Some delay should be anticipatedwhen ordering these items.

Les composants identifies per un trame et uneLes composants identifies per un trame et uneLes composants identifies per un trame et uneLes composants identifies per un trame et uneLes composants identifies per un trame et unemarque marque marque marque marque sont critiques pour la securite. Ne les sont critiques pour la securite. Ne les sont critiques pour la securite. Ne les sont critiques pour la securite. Ne les sont critiques pour la securite. Ne lesremplacer que par une piece portant le numeroremplacer que par une piece portant le numeroremplacer que par une piece portant le numeroremplacer que par une piece portant le numeroremplacer que par une piece portant le numerospecifie.specifie.specifie.specifie.specifie.

The components identified by shading andThe components identified by shading andThe components identified by shading andThe components identified by shading andThe components identified by shading andmark mark mark mark mark are critical for safety are critical for safety are critical for safety are critical for safety are critical for safety. Replace only. Replace only. Replace only. Replace only. Replace onlywith part number specified.with part number specified.with part number specified.with part number specified.with part number specified.

Note:Note:Note:Note:Note: Note:Note:Note:Note:Note:

SECTION 7SECTION 7SECTION 7SECTION 7SECTION 7EXPLODED VIEWSEXPLODED VIEWSEXPLODED VIEWSEXPLODED VIEWSEXPLODED VIEWS

— 39 — — 40 — — 41 — — 42 —

CN1751

CN1754

J1751

L1751

C1752

R1764

R1765

R1759

C1755

CN1753

G1

G2

KR

KG

KB

H1

H2

GROUND

G2

SPARK

GAP

GROUND

B

E

E

G

R

IK

TP47B

B OUT

TP47R

R OUT

20,27

1-673-986-11 171691511

1 2 3 4 5

A

B

C

R,G,B DRIVECRT DRIVE

H

KG G2

CV KR G1 G4HV

KB

1

1 2 3 4 5 6 7 8 9

1

2

3

4

5

6

1

2

3

4

5

4

5

6

7

8

9

10

11

12

1

I.C

KG

KR

H

KB

GND

G1

G2

H

F GND

1

C1752

C1751

L1751

C1755

R1761

R1760

J1751

D1758

R1770R1759

R1757R1756

R1758

D1756

D1754 D1755

CN1754

CN1753

CN1751

CN1752

R1763

R1764

R1765

IC1751

10

250V

0.0047

2kV

E

2.2

160V

1.8

3W

:RS

100k

1/2W

RGP10GPKG23

560k

1/2W

100

1/2W

1k

1/2W

1k

1/2W

1k

1/2W

1SS83TD

1SS83TD 1SS83TD

:PIN-J

1P

6P

:S-MICRO

5P

:S-MICRO

100

100

100

TDA6108JF/N1B

CRT DRIVER

TP47R

TP47B

R OUT

B OUTTO A BOARD

TO A BOARD

TAB(CONTACT)

E

R

G

B

IK

H

G2

CRT

B IN

G IN

R IN

GND

IK

R OUT

G OUT

B OUT

+B

27V: TIGER

CN502

CN301

E

E

N.C.

N.C.

VDD

200V

R.B.G. DRIVER

CRT DRIVE

)(

BA4D 10805 C

12 3

B

G

R

R

G

B

200V

200V

+B

+B

TO A BOARD T504 FV

TO A BOARD T504 G2

C BOARD SCHEMATIC DIAGRAM

A

B

C

D

E

F

G

H

1 2 3 4 5 6 7

C BOARDIC VOLTAGE LIST

IC1751PIN VOLT1 2.12 2.23 2.14 GND5 3.76 193.47 146.58 133.89 134.9

SECTION 8SECTION 8SECTION 8SECTION 8SECTION 8ELECTRICALELECTRICALELECTRICALELECTRICALELECTRICAL P P P P PARTS LISTARTS LISTARTS LISTARTS LISTARTS LIST

• Items marked with a asterisk "*" are not stockedsince they are seldom required for routine service.Some delay should be anticipated when ordering theseitems.

• All variable and adjustable resistors have characteristic curve B, unless otherwise noted.

RESISTORS• All resistors are in ohms• F : nonflammable

REFREFREFREFREF.NO. P.NO. P.NO. P.NO. P.NO. PART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTION REMARK REMARK REMARK REMARK REMARK

The components identified by The components identified by The components identified by The components identified by The components identified by in this manual in this manual in this manual in this manual in this manualhave been carefully factory-selected for each sethave been carefully factory-selected for each sethave been carefully factory-selected for each sethave been carefully factory-selected for each sethave been carefully factory-selected for each setin order to satisfy regulations regarding X-rayin order to satisfy regulations regarding X-rayin order to satisfy regulations regarding X-rayin order to satisfy regulations regarding X-rayin order to satisfy regulations regarding X-rayradiation. Should replacement be required, replaceradiation. Should replacement be required, replaceradiation. Should replacement be required, replaceradiation. Should replacement be required, replaceradiation. Should replacement be required, replaceonly with the value originally used.only with the value originally used.only with the value originally used.only with the value originally used.only with the value originally used.

Note:

The components identified by shadingThe components identified by shadingThe components identified by shadingThe components identified by shadingThe components identified by shadingand mark and mark and mark and mark and mark ! are critical for safety are critical for safety are critical for safety are critical for safety are critical for safety.....Replace only with part number specified.Replace only with part number specified.Replace only with part number specified.Replace only with part number specified.Replace only with part number specified.

Note:

Les composants identifies per un trame et uneLes composants identifies per un trame et uneLes composants identifies per un trame et uneLes composants identifies per un trame et uneLes composants identifies per un trame et unemarque marque marque marque marque ! sont critiques pour la securite. Ne sont critiques pour la securite. Ne sont critiques pour la securite. Ne sont critiques pour la securite. Ne sont critiques pour la securite. Neles remplacer que par une piece portant leles remplacer que par une piece portant leles remplacer que par une piece portant leles remplacer que par une piece portant leles remplacer que par une piece portant lenumero specifie.numero specifie.numero specifie.numero specifie.numero specifie.

When indicating parts by referencenumber, please include the board name.

REFREFREFREFREF.NO. P.NO. P.NO. P.NO. P.NO. PART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTION REMARK REMARK REMARK REMARK REMARK

—43 ——43 ——43 ——43 ——43 —


!

!

***** A-1299-446-AA-1299-446-AA-1299-446-AA-1299-446-AA-1299-446-A A BOARD, COMPLETEA BOARD, COMPLETEA BOARD, COMPLETEA BOARD, COMPLETEA BOARD, COMPLETE

The high-voltage leads associated with the FBT on this board are not included andThe high-voltage leads associated with the FBT on this board are not included andThe high-voltage leads associated with the FBT on this board are not included andThe high-voltage leads associated with the FBT on this board are not included andThe high-voltage leads associated with the FBT on this board are not included and must be ordered separately. Order the following must be ordered separately. Order the following must be ordered separately. Order the following must be ordered separately. Order the following must be ordered separately. Order the following leads when requesting this A Board:leads when requesting this A Board:leads when requesting this A Board:leads when requesting this A Board:leads when requesting this A Board:

1-251-643-41 CAP ASSY, HIGH VOLTAGE1-900-800-65 CONECTOR ASSY, FOCUS LEAD1-900-803-22 WIRE ASSY, G2 LEAD

1-533-223-11 HOLDER, FUSE* 4-374-846-11 COVER, CAPACITOR, CAP TYPE

4-382-854-11 SCREW (M3X10), P, SW (+)4-382-854-11 SCREW (M3X10), P, SW (+)

CAPCAPCAPCAPCAPACITACITACITACITACITOROROROROR

C001 1-163-259-91 CERAMIC CHIP 220pF 5% 50VC004 1-104-664-11 ELECT 47µF 20% 25VC005 1-126-960-11 ELECT 1µF 20% 50VC006 1-163-035-00 CERAMIC CHIP 0.047µF 50VC007 1-163-259-91 CERAMIC CHIP 220pF 5% 50V

C008 1-163-009-11 CERAMIC CHIP 0.001µF 10% 50VC010 1-163-009-11 CERAMIC CHIP 0.001µF 10% 50VC011 1-163-009-11 CERAMIC CHIP 0.001µF 10% 50VC012 1-163-009-11 CERAMIC CHIP 0.001µF 10% 50VC013 1-163-259-91 CERAMIC CHIP 220pF 5% 50V

C014 1-164-004-11 CERAMIC CHIP 0.1µF 10% 25VC017 1-126-960-11 ELECT 1µF 20% 50VC019 1-163-135-00 CERAMIC CHIP 560pF 5% 50VC020 1-130-495-00 MYLAR 0.1µF 5% 50VC027 1-163-259-91 CERAMIC CHIP 220pF 5% 50V

C028 1-163-005-11 CERAMIC CHIP 470pF 10% 50VC030 1-163-259-91 CERAMIC CHIP 220pF 5% 50VC034 1-163-037-11 CERAMIC CHIP 0.022µF 10% 50VC037 1-164-161-11 CERAMIC CHIP 0.0022µF 10% 50VC038 1-126-941-11 ELECT 470µF 20% 25V

C039 1-126-964-11 ELECT 10µF 20% 50VC046 1-104-664-11 ELECT 47µF 20% 25VC047 1-163-259-91 CERAMIC CHIP 220pF 5% 50VC048 1-163-009-11 CERAMIC CHIP 0.001µF 10% 50VC050 1-163-251-11 CERAMIC CHIP 100pF 5% 50V

C055 1-163-251-11 CERAMIC CHIP 100pF 5% 50VC060 1-163-005-11 CERAMIC CHIP 470pF 10% 50VC062 1-164-161-11 CERAMIC CHIP 0.0022µF 10% 50VC065 1-163-009-11 CERAMIC CHIP 0.001µF 10% 50VC072 1-163-259-91 CERAMIC CHIP 220pF 5% 50V

C074 1-163-251-11 CERAMIC CHIP 100pF 5% 50VC077 1-163-251-11 CERAMIC CHIP 100pF 5% 50VC091 1-163-231-11 CERAMIC CHIP 15pF 5% 50VC092 1-163-231-11 CERAMIC CHIP 15pF 5% 50VC101 1-126-963-11 ELECT 4.7µF 20% 50V

C150 1-126-935-11 ELECT 470µF 20% 16VC151 1-104-664-11 ELECT 47µF 20% 25VC160 1-126-382-11 ELECT 100µF 20% 16VC200 1-107-698-11 ELECT 10µF 20% 25VC201 1-126-960-11 ELECT 1µF 20% 50V

C203 1-163-009-11 CERAMIC CHIP 0.001µF 10% 50VC204 1-107-698-11 ELECT 10µF 20% 25VC205 1-126-960-11 ELECT 1µF 20% 50VC215 1-126-957-11 ELECT 0.22µF 20% 50VC216 1-126-959-11 ELECT 0.47µF 20% 50V

C217 1-126-959-11 ELECT 0.47µF 20% 50VC218 1-126-941-11 ELECT 470µF 20% 25VC219 1-130-495-00 MYLAR 0.1µF 5% 50VC220 1-126-941-11 ELECT 470µF 20% 25VC221 1-126-941-11 ELECT 470µF 20% 25V

C222 1-126-964-11 ELECT 10µF 20% 50VC226 1-107-635-11 ELECT 4.7µF 20% 160VC228 1-126-964-11 ELECT 10µF 20% 50VC232 1-126-960-11 ELECT 1µF 20% 50VC234 1-126-964-11 ELECT 10µF 20% 50V

C236 1-163-021-91 CERAMIC CHIP 0.01µF 10% 50VC243 1-163-017-00 CERAMIC CHIP .0047µF 10% 50VC260 1-126-960-11 ELECT 1µF 20% 50VC301 1-163-233-11 CERAMIC CHIP 18pF 5% 50V

— 44 44 44 44 44 —

REFREFREFREFREF.NO. P.NO. P.NO. P.NO. P.NO. PART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTION REMARK REMARK REMARK REMARK REMARK REFREFREFREFREF.NO. P.NO. P.NO. P.NO. P.NO. PART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTIONART NO. DESCRIPTION REMARK REMARK REMARK REMARK REMARK



!KV-21ME43KV-21ME43KV-21ME43KV-21ME43KV-21ME43

C303 1-126-964-11 ELECT 10µF 20% 50VC305 1-164-004-11 CERAMIC CHIP 0.1µF 10% 25VC306 1-164-004-11 CERAMIC CHIP 0.1µF 10% 25VC308 1-126-964-11 ELECT 10µF 20% 50VC309 1-163-021-91 CERAMIC CHIP 0.01µF 10% 50V

C310 1-126-960-11 ELECT 1µF 20% 50VC311 1-163-021-91 CERAMIC CHIP 0.01µF 10% 50VC312 1-126-942-61 ELECT 1000µF 20% 25VC313 1-163-021-91 CERAMIC CHIP 0.01µF 10% 50VC314 1-163-009-11 CERAMIC CHIP 0.001µF 10% 50V

C316 1-163-021-91 CERAMIC CHIP 0.01µF 10% 50VC317 1-163-021-91 CERAMIC CHIP 0.01µF 10% 50VC318 1-163-021-91 CERAMIC CHIP 0.01µF 10% 50VC319 1-126-963-11 ELECT 4.7µF 20% 50VC320 1-126-959-11 ELECT 0.47µF 20% 50V

C321 1-163-133-00 CERAMIC CHIP 470pF 5% 50VC330 1-163-007-11 CERAMIC CHIP 680pF 10% 50VC373 1-163-038-11 CERAMIC CHIP 0.1µF 25VC374 1-126-935-11 ELECT 470µF 20% 16VC375 1-163-038-11 CERAMIC CHIP 0.1µF 25V

C376 1-104-664-11 ELECT 47µF 20% 25VC390 1-130-495-00 MYLAR 0.1µF 5% 50VC418 1-126-964-11 ELECT 10µF 20% 50VC502 1-106-371-00 MYLAR 0.015µF 20% 200VC504 1-102-228-00 CERAMIC CHIP 470pF 10% 500V

C505 1-117-626-11 FILM 2000pF 3% 1.2KVC507 1-117-633-11 FILM 3900pF 3% 1.2KVC508 1-106-371-00 MYLAR 0.015µF 20% 200VC509 1-162-115-00 CERAMIC CHIP 330pF 10% 2KVC511 1-117-665-11 FILM 0.33µF 5% 250V

C531 1-106-387-00 MYLAR 0.068µF 10% 200VC541 1-126-969-11 ELECT 220µF 20% 50VC542 1-126-967-11 ELECT 47µF 20% 50VC543 1-136-169-00 FILM 0.22µF 5% 50VC552 1-102-244-00 CERAMIC CHIP 220pF 10% 500V

C553 1-107-652-11 ELECT 10µF 20% 250VC556 1-164-161-11 CERAMIC CHIP 0.0022µF 10% 50VC561 1-102-244-00 CERAMIC CHIP 220pF 10% 500VC562 1-126-941-11 ELECT 470µF 20% 25VC563 1-137-417-11 MYLAR .0047µF 10% 200V

C564 1-126-941-11 ELECT 470µF 20% 25VC571 1-126-965-11 ELECT 22µF 20% 50VC573 1-126-963-11 ELECT 4.7µF 20% 50VC574 1-107-635-11 ELECT 4.7µF 20% 160VC575 1-163-021-91 CERAMIC CHIP 0.01µF 10% 50V

C576 1-123-024-21 ELECT 33µF 160VC577 1-126-959-11 ELECT 0.47µF 20% 50VC591 1-137-150-11 MYLAR 0.01µF 10% 100VC601 1-136-311-11 MYLAR 0.47µF 20% 125VC602 1-119-907-51 CERAMIC CHIP 4700pF 20% 250V

C603 1-119-907-51 CERAMIC CHIP 4700pF 20% 250VC604 1-119-907-51 CERAMIC CHIP 4700pF 20% 250VC605 1-119-907-51 CERAMIC CHIP 4700pF 20% 250VC611 1-117-214-11 CERAMIC CHIP 0.001µF 10% 2KVC613 1-117-893-11 ELECT 470µF 20% 250V

C614 1-130-471-00 MYLAR 0.001µF 5% 50VC618 1-125-893-11 FILM 680pF 3% 1.5KVC620 1-102-114-00 CERAMIC CHIP 470pF 10% 50VC621 1-136-356-11 MYLAR 470pF 5% 50VC622 1-136-479-11 FILM 0.001µF 5% 50V

C623 1-136-153-00 FILM 0.01µF 5% 50VC626 1-126-959-11 ELECT 0.47µF 20% 50VC628 1-104-665-11 ELECT 100µF 20% 25VC629 1-104-665-11 ELECT 100µF 20% 25VC630 1-163-021-91 CERAMIC CHIP 0.01µF 10% 50V

C631 1-126-768-11 ELECT 2200µF 20% 16VC632 1-126-942-61 ELECT 1000µF 20% 25VC633 1-126-967-11 ELECT 47µF 20% 50VC634 1-131-867-51 ELECT 100µF 160VC638 1-136-311-11 MYLAR 0.47µF 20% 125V

C641 1-102-002-00 CERAMIC CHIP 680pF 10% 500VC643 1-113-924-11 CERAMIC CHIP .0047µF 20% 250VC644 1-113-924-11 CERAMIC CHIP .0047µF 20% 250VC645 1-137-605-11 MYLAR 0.01µF 10% 250VC646 1-107-679-91 ELECT 10µF 20% 450V

C647 1-130-467-00 MYLAR 470pF 5% 50VC648 1-162-318-11 CERAMIC CHIP 0.001µF 10% 500VC650 1-130-471-00 MYLAR 0.001µF 5% 50VC651 1-126-382-11 ELECT 100µF 20% 16VC653 1-104-664-11 ELECT 47µF 20% 25V

C654 1-126-970-11 ELECT 330µF 20% 50VC656 1-126-965-11 ELECT 22µF 20% 50VC657 1-102-002-00 CERAMIC CHIP 680pF 10% 500VC690 1-126-959-11 ELECT 0.47µF 20% 50VC691 1-126-941-11 ELECT 470µF 20% 25V

C692 1-104-664-11 ELECT 47µF 20% 25VC693 1-137-194-81 FILM 0.47µF 5% 50V

CONNECTOR CONNECTOR CONNECTOR CONNECTOR CONNECTOR

CN203* 1-560-124-00 PLUG, CONNECTOR (2.5MM) 4PCN301* 1-564-508-11 PLUG, CONNECTOR 5PCN401 1-564-505-11 PLUG, CONNECTOR 2PCN402 1-564-505-11 PLUG, CONNECTOR 2PCN501* 1-580-798-11 CONNECTOR PIN (DY) 6P

CN502* 1-564-509-11 PLUG, CONNECTOR 6PCN601 1-580-843-11 PIN, CONNECTOR (POWER)CN602* 1-508-786-00 PIN, CONNECTOR (5MM PITCH) 2P

— 45 45 45 45 45 —





DIODEDIODEDIODEDIODEDIODE

D001 8-719-921-44 DIODE MTZJ-T-77-5.1CD002 1-810-039-21 LED UNITD003 8-719-991-33 DIODE 1SS133T-77D004 8-719-911-19 DIODE 1SS119-25TDD038 8-719-109-89 DIODE MTZJ-T-77-5.6C

D201 8-719-110-17 DIODE MTZJ-T-77-10BD203 8-719-110-17 DIODE MTZJ-T-77-10BD205 8-719-982-22 DIODE MTZJ-T-77-30DD208 8-719-110-17 DIODE MTZJ-T-77-10BD209 8-719-110-17 DIODE MTZJ-T-77-10B

D210 8-719-110-17 DIODE MTZJ-T-77-10BD215 8-719-110-17 DIODE MTZJ-T-77-10BD301 8-719-110-08 DIODE MTZJ-T-77-8.2BD302 8-719-921-44 DIODE MTZJ-T-77-5.1CD310 8-719-073-01 DIODE MA111-TX

D311 8-719-073-01 DIODE MA111-TXD320 8-719-976-99 DIODE UDZ-TE-17-5.1BD403 8-719-991-33 DIODE 1SS133T-77D434 8-719-991-33 DIODE 1SS133T-77D501 8-719-945-80 DIODE ERC06-15S

D502 8-719-302-43 DIODE RGP10GPKG23D541 8-719-908-03 DIODE GP08DPKG23D552 8-719-302-43 DIODE RGP10GPKG23D561 8-719-979-85 DIODE RGP15GPKG23D562 8-719-979-85 DIODE RGP15GPKG23

D571 8-719-991-33 DIODE 1SS133T-77D572 8-719-991-33 DIODE 1SS133T-77D573 8-719-110-08 DIODE MTZJ-T-77-8.2BD574 8-719-979-84 DIODE EGP20DPKG23D581 8-719-991-33 DIODE 1SS133T-77

D601 8-719-510-51 DIODE D3SB60FD602 8-719-991-33 DIODE 1SS133T-77D603 8-719-046-74 DIODE 10ELS2N-TA1B2D611 8-719-110-17 DIODE MTZJ-T-77-10BD613 8-719-063-70 DIODE D1NL20U-TA

D614 8-719-063-70 DIODE D1NL20U-TAD615 8-719-510-02 DIODE D1NS4-TAD616 8-719-510-73 DIODE S3L20µF4D617 8-719-027-43 DIODE S2L20µFD631 8-719-911-55 DIODE ERC04-06S

D632 8-719-911-55 DIODE ERC04-06SD633 8-719-948-45 DIODE ERA22-08TP3D634 8-719-991-33 DIODE 1SS133T-77D635 8-719-991-33 DIODE 1SS133T-77D636 8-719-063-70 DIODE D1NL20U-TA

D637 8-719-109-93 DIODE MTZJ-T-77-6.2CD638 8-719-510-48 DIODE D1N20R-TAD650 8-719-109-89 DIODE MTZJ-T-77-5.6C

D653 8-719-312-10 DIODE RU4AM-T3D670 8-719-991-33 DIODE 1SS133T-77

FUSEFUSEFUSEFUSEFUSE

F601 1-533-795-11 LINK, FUSE

FERRITE BEADFERRITE BEADFERRITE BEADFERRITE BEADFERRITE BEAD

FB501 1-410-396-41 FERRITE 0.45µHFB600 1-410-397-21 FERRITE 1.1µHFB601 1-410-397-21 FERRITE 1.1µHFB602 1-410-397-21 FERRITE 1.1µHFB604 1-410-397-21 FERRITE 1.1µH

FB605 1-410-397-21 FERRITE 1.1µHFB606 1-410-397-21 FERRITE 1.1µHFB609 1-412-911-11 FERRITE 0µHFB611 1-410-397-21 FERRITE 1.1µH

ICICICICIC

IC001 8-759-639-83 IC M37273µF-255SPIC002 8-759-575-47 IC NJM78LR05BM-TE2IC003 8-759-575-71 IC M24C04-MN6TIC004 8-742-205-20 HYB IC SBX3081-01(20)IC201 8-759-450-93 IC NJM2521M-TE1

IC301 8-752-098-78 IC CXA2133BSIC401 8-759-490-17 IC TDA7057AQ/N2IC521 8-759-100-96 IC NJM4558M-TE2IC541 8-759-980-58 IC TDA8172IC601 8-749-015-60 IC STR-F6624IC602 8-759-198-31 IC UPC1093J-1-T

JACKJACKJACKJACKJACK

J201 1-580-441-71 JACK, PIN 2PJ202 1-580-441-41 JACK, PIN 2PJ400 1-568-267-21 JACK

CONDUCTORCONDUCTORCONDUCTORCONDUCTORCONDUCTOR

JR003 1-216-295-11 SHORT 0

COILCOILCOILCOILCOIL

L001 1-412-058-11 INDUCTOR 10µHL002 1-412-064-11 INDUCTOR 100µHL003 1-412-064-11 INDUCTOR 100µHL150 1-412-064-11 INDUCTOR 100µHL151 1-412-058-11 INDUCTOR 10µH

— 46 46 46 46 46 —





L160 1-412-058-11 INDUCTOR 10µHL301 1-412-062-11 INDUCTOR 47µHL302 1-412-058-11 INDUCTOR 10µHL503 1-412-553-11 INDUCTOR 3.3MHL504 1-412-533-21 INDUCTOR 47µHL591 1-412-531-31 INDUCTOR 33µH

PHOTO COUPLERPHOTO COUPLERPHOTO COUPLERPHOTO COUPLERPHOTO COUPLER

PH600 8-749-010-64 PHOTO COUPLER PC123FY2

IC LINKIC LINKIC LINKIC LINKIC LINK

PS201 1-532-984-11 LINK, IC 2A/90V

TRANSISTORTRANSISTORTRANSISTORTRANSISTORTRANSISTOR

Q001 8-729-216-22 TRANSISTOR 2SB709A-QRS-TXQ002 8-729-422-27 TRANSISTOR 2SD601A-QRS-TXQ003 8-729-422-27 TRANSISTOR 2SD601A-QRS-TXQ202 8-729-422-27 TRANSISTOR 2SD601A-QRS-TXQ203 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX

Q205 8-729-216-22 TRANSISTOR 2SB709A-QRS-TXQ252 8-729-422-27 TRANSISTOR 2SD601A-QRS-TXQ300 8-729-422-27 TRANSISTOR 2SD601A-QRS-TXQ301 8-729-216-22 TRANSISTOR 2SB709A-QRS-TXQ302 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX

Q303 8-729-423-33 TRANSISTOR 2SC3311A-QRSTAQ305 8-729-216-22 TRANSISTOR 2SB709A-QRS-TXQ390 8-729-422-27 TRANSISTOR 2SD601A-QRS-TXQ391 8-729-422-27 TRANSISTOR 2SD601A-QRS-TXQ392 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX

Q393 8-729-216-22 TRANSISTOR 2SB709A-QRS-TXQ394 8-729-216-22 TRANSISTOR 2SB709A-QRS-TXQ501 8-729-140-50 TRANSISTOR 2SC3209LK-TPQ502 8-729-051-69 TRANSISTOR 2SD2624Q556 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX

Q571 8-729-200-17 TRANSISTOR 2SA1091O-TPE2Q601 8-729-423-33 TRANSISTOR 2SC3311A-QRSTAQ602 8-729-422-27 TRANSISTOR 2SD601A-QRS-TXQ605 8-729-423-99 TRANSISTOR 2SD2137-OP-TAQ606 8-729-111-55 TRANSISTOR 2SD1292-T103

Q607 8-729-044-30 TRANSISTOR 2SK2845-LB102Q608 8-729-423-33 TRANSISTOR 2SC3311A-QRSTAQ650 8-729-111-55 TRANSISTOR 2SD1292-T103Q670 8-729-140-96 TRANSISTOR 2SD774-T-34

RESISTORRESISTORRESISTORRESISTORRESISTOR

R001 1-216-073-00 RES-CHIP 10K 5% 1/10WR002 1-249-429-11 CARBON 10K 5% 1/4WR003 1-216-033-00 RES-CHIP 220 5% 1/10WR004 1-216-073-00 RES-CHIP 10K 5% 1/10WR005 1-216-033-00 RES-CHIP 220 5% 1/10W

R007 1-216-025-11 RES-CHIP 100 5% 1/10WR008 1-216-033-00 RES-CHIP 220 5% 1/10WR009 1-249-409-11 CARBON 220 5% 1/4WR013 1-249-433-11 CARBON 22K 5% 1/4WR016 1-249-413-11 CARBON 470 5% 1/4WR017 1-216-113-00 RES-CHIP 470K 5% 1/10WR018 1-249-417-11 CARBON 1K 5% 1/4W

R019 1-249-425-11 CARBON 4.7K 5% 1/4WR020 1-249-427-11 CARBON 6.8K 5% 1/4WR021 1-249-415-11 CARBON 680 5% 1/4WR022 1-249-416-11 CARBON 820 5% 1/4WR023 1-249-421-11 CARBON 2.2K 5% 1/4W

R025 1-249-426-11 CARBON 5.6K 5% 1/4WR026 1-249-426-11 CARBON 5.6K 5% 1/4WR027 1-249-426-11 CARBON 5.6K 5% 1/4WR028 1-216-049-11 RES-CHIP 1K 5% 1/10WR030 1-249-429-11 CARBON 10K 5% 1/4W

R031 1-216-045-00 RES-CHIP 680 5% 1/10WR032 1-216-033-00 RES-CHIP 220 5% 1/10WR033 1-249-409-11 CARBON 220 5% 1/4WR038 1-216-049-11 RES-CHIP 1K 5% 1/10WR040 1-249-413-11 CARBON 470 5% 1/4W

R043 1-249-417-11 CARBON 1K 5% 1/4WR044 1-216-033-00 RES-CHIP 220 5% 1/10WR045 1-216-065-91 RES-CHIP 4.7K 5% 1/10WR046 1-216-033-00 RES-CHIP 220 5% 1/10WR047 1-216-065-91 RES-CHIP 4.7K 5% 1/10W

R048 1-216-025-11 RES-CHIP 100 5% 1/10WR049 1-216-089-11 RES-CHIP 47K 5% 1/10WR050 1-249-429-11 CARBON 10K 5% 1/4WR054 1-216-073-00 RES-CHIP 10K 5% 1/10WR055 1-216-033-00 RES-CHIP 220 5% 1/10W

R056 1-249-425-11 CARBON 4.7K 5% 1/4WR057 1-216-065-91 RES-CHIP 4.7K 5% 1/10WR058 1-216-065-91 RES-CHIP 4.7K 5% 1/10WR065 1-216-033-00 RES-CHIP 220 5% 1/10WR066 1-216-033-00 RES-CHIP 220 5% 1/10W

R072 1-249-409-11 CARBON 220 5% 1/4WR073 1-216-304-11 RES-CHIP 3.3 5% 1/10WR074 1-216-073-00 RES-CHIP 10K 5% 1/10WR075 1-216-073-00 RES-CHIP 10K 5% 1/10WR076 1-216-121-11 RES-CHIP 1M 5% 1/10W

— 47 47 47 47 47 —





R077 1-216-097-11 RES-CHIP 100K 5% 1/10WR078 1-216-049-11 RES-CHIP 1K 5% 1/10WR085 1-216-073-00 RES-CHIP 10K 5% 1/10WR086 1-216-073-00 RES-CHIP 10K 5% 1/10WR087 1-216-045-00 RES-CHIP 680 5% 1/10W

R088 1-216-045-00 RES-CHIP 680 5% 1/10WR089 1-216-045-00 RES-CHIP 680 5% 1/10WR090 1-249-429-11 CARBON 10K 5% 1/4WR091 1-249-429-11 CARBON 10K 5% 1/4WR092 1-216-049-11 RES-CHIP 1K 5% 1/10W

R093 1-249-425-11 CARBON 4.7K 5% 1/4WR096 1-216-057-00 RES-CHIP 2.2K 5% 1/10WR097 1-216-073-00 RES-CHIP 10K 5% 1/10WR099 1-249-425-11 CARBON 4.7K 5% 1/4WR101 1-216-073-00 RES-CHIP 10K 5% 1/10W

R150 1-216-025-11 RES-CHIP 100 5% 1/10WR151 1-216-025-11 RES-CHIP 100 5% 1/10WR201 1-216-113-00 RES-CHIP 470K 5% 1/10WR204 1-216-022-00 RES-CHIP 75 5% 1/10WR205 1-247-895-91 CARBON 470K 5% 1/4W

R231 1-216-073-00 RES-CHIP 10K 5% 1/10WR235 1-208-794-11 METAL CHIP 3.3K 0.50% 1/10WR237 1-249-409-11 CARBON 220 5% 1/4WR238 1-249-417-11 CARBON 1K 5% 1/4WR239 1-249-409-11 CARBON 220 5% 1/4W

R240 1-249-417-11 CARBON 1K 5% 1/4WR242 1-249-433-11 CARBON 22K 5% 1/4WR243 1-216-085-00 RES-CHIP 33K 5% 1/10WR245 1-216-295-11 SHORT 0R251 1-216-041-00 RES-CHIP 470 5% 1/10W

R252 1-216-041-00 RES-CHIP 470 5% 1/10WR253 1-215-899-11 METAL CHIP 15K 5% 2WR254 1-216-025-11 RES-CHIP 100 5% 1/10WR255 1-216-025-11 RES-CHIP 100 5% 1/10WR256 1-249-425-11 CARBON 4.7K 5% 1/4W

R257 1-216-073-00 RES-CHIP 10K 5% 1/10WR260 1-216-097-11 RES-CHIP 100K 5% 1/10WR261 1-216-097-11 RES-CHIP 100K 5% 1/10WR262 1-216-025-11 RES-CHIP 100 5% 1/10WR269 1-208-794-11 METAL CHIP 3.3K 0.50% 1/10W

R280 1-216-022-00 RES-CHIP 75 5% 1/10WR284 1-216-295-11 SHORT 0R289 1-216-295-11 SHORT 0R290 1-216-025-11 RES-CHIP 100 5% 1/10WR291 1-216-071-00 RES-CHIP 8.2K 5% 1/10W

R293 1-249-429-11 CARBON 10K 5% 1/4WR295 1-216-295-11 SHORT 0R298 1-216-025-11 RES-CHIP 100 5% 1/10WR301 1-216-295-11 SHORT 0R304 1-216-073-00 RES-CHIP 10K 5% 1/10W

R306 1-216-675-91 METAL CHIP 10K 0.50% 1/10WR307 1-216-065-91 RES-CHIP 4.7K 5% 1/10WR308 1-247-887-00 CARBON 220K 5% 1/4WR309 1-249-433-11 CARBON 22K 5% 1/4WR310 1-216-049-11 RES-CHIP 1K 5% 1/10W

R312 1-216-033-00 RES-CHIP 220 5% 1/10WR313 1-249-409-11 CARBON 220 5% 1/4WR314 1-249-409-11 CARBON 220 5% 1/4WR315 1-249-409-11 CARBON 220 5% 1/4WR316 1-216-025-11 RES-CHIP 100 5% 1/10W

R317 1-249-421-11 CARBON 2.2K 5% 1/4WR318 1-216-073-00 RES-CHIP 10K 5% 1/10WR319 1-216-073-00 RES-CHIP 10K 5% 1/10WR321 1-216-069-00 RES-CHIP 6.8K 5% 1/10WR322 1-216-073-00 RES-CHIP 10K 5% 1/10W

R323 1-249-415-11 CARBON 680 5% 1/4WR324 1-249-425-11 CARBON 4.7K 5% 1/4WR325 1-216-097-11 RES-CHIP 100K 5% 1/10WR329 1-216-025-11 RES-CHIP 100 5% 1/10WR330 1-216-025-11 RES-CHIP 100 5% 1/10W

R331 1-216-025-11 RES-CHIP 100 5% 1/10WR347 1-216-045-00 RES-CHIP 680 5% 1/10WR356 1-216-057-00 RES-CHIP 2.2K 5% 1/10WR383 1-216-057-00 RES-CHIP 2.2K 5% 1/10WR384 1-216-057-00 RES-CHIP 2.2K 5% 1/10W

R385 1-216-057-00 RES-CHIP 2.2K 5% 1/10WR390 1-216-025-11 RES-CHIP 100 5% 1/10WR391 1-216-049-11 RES-CHIP 1K 5% 1/10WR392 1-216-025-11 RES-CHIP 100 5% 1/10WR393 1-216-049-11 RES-CHIP 1K 5% 1/10W

R394 1-247-807-31 CARBON 100 5% 1/4WR400 1-249-433-11 CARBON 22K 5% 1/4WR432 1-249-430-11 CARBON 12K 5% 1/4WR433 1-216-075-00 RES-CHIP 12K 5% 1/10WR501 1-249-421-11 CARBON 2.2K 5% 1/4W

R502 1-215-921-11 METAL CHIP 4.7K 5% 3WR508 1-215-864-00 METAL CHIP 150 5% 1WR532 1-215-437-00 METAL CHIP 4.7K 1% 1/4WR533 1-215-461-00 METAL CHIP 47K 1% 1/4WR534 1-215-453-00 METAL CHIP 22K 1% 1/4W

R535 1-249-441-11 CARBON 100K 5% 1/4WR541 1-216-065-91 RES-CHIP 4.7K 5% 1/10WR542 1-249-429-11 CARBON 10K 5% 1/4WR543 1-249-429-11 CARBON 10K 5% 1/4WR544 1-216-377-11 METAL CHIP 4.7 5% 2W

R546 1-215-890-11 METAL CHIP 470 5% 2WR547 1-249-385-11 CARBON 2.2 5% 1/4WR548 1-249-425-11 CARBON 4.7K 5% 1/4WR549 1-216-073-00 RES-CHIP 10K 5% 1/10WR552 1-247-887-00 CARBON 220K 5% 1/4W

— 48 —


The components identified by in this manual havebeen carefully factory-selected for each set in orderto satisfy regulations regarding X-ray radiation. Shouldreplacement be required, replace only with the valueoriginally used.



R641 1-216-397-11 METAL CHIP 4.7 5% 3WR643 1-216-065-91 RES-CHIP 4.7K 5% 1/10WR644 1-249-418-11 CARBON 1.2K 5% 1/4WR647 1-260-081-11 CARBON 33 5% 1/2WR648 1-249-421-11 CARBON 2.2K 5% 1/4W

R649 1-249-413-11 CARBON 470 5% 1/4WR650 1-249-415-11 CARBON 680 5% 1/4WR651 1-219-513-11 CARBON 4.7M 5% 1/2WR655 1-216-361-00 METAL CHIP 0.22 5% 2WR656 1-249-419-11 CARBON 1.5K 5% 1/4W

R657 1-247-843-11 CARBON 3.3K 5% 1/4WR659 1-202-961-11 CEMENTED 1.8 5% 10WR660 1-220-926-11 FUSIBLE 0.47 10% 1/2WR661 1-216-485-11 METAL CHIP 5.6K 5% 3WR662 1-249-377-11 CARBON 0.47 5% 1/4W

R663 1-216-369-00 METAL CHIP 1 5% 2WR664 1-215-483-00 METAL CHIP 390K 1% 1/4WR670 1-249-421-11 CARBON 2.2K 5% 1/4WR671 1-249-417-11 CARBON 1K 5% 1/4WR672 1-216-485-11 METAL CHIP 5.6K 5% 3W

R674 1-249-415-11 CARBON 680 5% 1/4WR675 1-215-859-00 METAL CHIP 22 5% 1WR679 1-249-413-11 CARBON 470 5% 1/4WR682 1-216-065-91 RES-CHIP 4.7K 5% 1/10WR683 1-249-421-11 CARBON 2.2K 5% 1/4WR688 1-216-485-11 METAL CHIP 5.6K 5% 3W

RELARELARELARELARELAYYYYY

RY601 1-755-198-11 RELAYRY602 1-755-266-11 RELAY, AC POWER

SWITCHSWITCHSWITCHSWITCHSWITCH

S001 1-692-431-21 SWITCH TACTILES002 1-692-431-21 SWITCH TACTILES003 1-692-431-21 SWITCH TACTILES004 1-692-431-21 SWITCH TACTILES005 1-692-431-21 SWITCH TACTILE

S006 1-692-431-21 SWITCH TACTILES007 1-692-431-21 SWITCH TACTILE

TRANSFORMERTRANSFORMERTRANSFORMERTRANSFORMERTRANSFORMER

T501 1-437-210-11 TRANSFORMER, HORIZONTAL DRIVET504 1-453-238-21 TRANSFORMER, FBT ASSY (NX-1744//X4E4)T601 1-423-895-11 TRANSFORMER, LINE FILTER (LFT)T603 1-433-816-11 TRANSFORMER, REGULATORT604 1-431-852-11 TRANSFORMER, CONVERTER (SRT)

R553 1-260-312-11 CARBON 47 5% 1/2WR559 1-216-101-00 RES-CHIP 150K 5% 1/10WR560 1-216-093-91 RES-CHIP 68K 5% 1/10WR561 1-216-349-00 METAL CHIP 1 5% 1WR562 1-216-349-00 METAL CHIP 1 5% 1W

R565 1-216-081-00 RES-CHIP 22K 5% 1/10WR566 1-216-077-91 RES-CHIP 15K 5% 1/10WR567 1-216-065-91 RES-CHIP 4.7K 5% 1/10WR568 1-216-121-11 RES-CHIP 1M 5% 1/10WR571 1-216-369-00 METAL CHIP 1 5% 2W

R572 1-249-421-11 CARBON 2.2K 5% 1/4WR573 1-247-895-91 CARBON 470K 5% 1/4WR574 1-249-417-11 CARBON 1K 5% 1/4WR575 1-247-891-00 CARBON 330K 5% 1/4WR576 1-249-441-11 CARBON 100K 5% 1/4W

R577 1-249-432-11 CARBON 18K 5% 1/4WR578 1-216-467-11 METAL CHIP 56K 5% 2WR579 1-216-646-11 METAL CHIP 620 0.50% 1/10WR580 1-216-295-11 SHORT 0R582 1-208-826-11 METAL CHIP 68K 0.50% 1/10W

R583 1-208-830-11 METAL CHIP 100K 0.50% 1/10WR584 1-208-806-11 METAL CHIP 10K 0.50% 1/10WR585 1-216-085-00 RES-CHIP 33K 5% 1/10WR586 1-216-069-00 RES-CHIP 6.8K 5% 1/10WR591 1-215-880-00 METAL CHIP 10 5% 2W

R602 1-249-389-11 CARBON 4.7 5% 1/4WR603 1-247-895-91 CARBON 470K 5% 1/4WR608 1-240-205-91 CARBON 22M 5% 1/2WR609 1-249-421-11 CARBON 2.2K 5% 1/4WR610 1-249-417-11 CARBON 1K 5% 1/4W

R611 1-249-437-11 CARBON 47K 5% 1/4WR612 1-249-415-11 CARBON 680 5% 1/4WR614 1-249-429-11 CARBON 10K 5% 1/4WR616 1-260-302-51 CARBON 6.8 5% 1/2WR617 1-249-415-11 CARBON 680 5% 1/4W

R620 1-219-512-11 CARBON 2.2M 5% 1/2WR623 1-249-429-11 CARBON 10K 5% 1/4WR625 1-215-429-00 METAL CHIP 2.2K 1% 1/4WR626 1-215-469-00 METAL CHIP 100K 1% 1/4WR630 1-249-421-11 CARBON 2.2K 5% 1/4W

R631 1-249-429-11 CARBON 10K 5% 1/4WR632 1-208-806-11 METAL CHIP 10K 0.50% 1/10WR633 1-215-457-00 METAL CHIP 33K 1% 1/4WR634 1-249-417-11 CARBON 1K 5% 1/4WR635 1-216-073-00 RES-CHIP 10K 5% 1/10W

R636 1-208-798-11 METAL CHIP 4.7K 0.50% 1/10WR637 1-208-806-11 METAL CHIP 10K 0.50% 1/10WR638 1-208-814-91 METAL CHIP 22K 0.50% 1/10WR639 1-216-089-11 RES-CHIP 47K 5% 1/10WR640 1-216-089-11 RES-CHIP 47K 5% 1/10W

— 49 —


Les composants identifies per un trame et uneLes composants identifies per un trame et uneLes composants identifies per un trame et uneLes composants identifies per un trame et uneLes composants identifies per un trame et unemarque marque marque marque marque ! sont critiques pour la securite. Ne sont critiques pour la securite. Ne sont critiques pour la securite. Ne sont critiques pour la securite. Ne sont critiques pour la securite. Neles remplacer que par une1 piece portant leles remplacer que par une1 piece portant leles remplacer que par une1 piece portant leles remplacer que par une1 piece portant leles remplacer que par une1 piece portant lenumero specifie.numero specifie.numero specifie.numero specifie.numero specifie.



THERMISTORTHERMISTORTHERMISTORTHERMISTORTHERMISTOR

THP601 1-810-597-11 THERMISTOR, POSITIVE

TUNERTUNERTUNERTUNERTUNER

TU101 1-693-454-12 TUNER

VVVVVARISTARISTARISTARISTARISTOROROROROR

VDR601 1-803-585-11 VARISTOR ENE271D-10A

CRCRCRCRCRYSTYSTYSTYSTYSTALALALALAL

X001 1-767-487-11 VIBRATOR, CRYSTALX301 1-567-505-11 OSCILLATOR, CRYSTAL

"

***** A-1331-917-AA-1331-917-AA-1331-917-AA-1331-917-AA-1331-917-A C BOARD, MOUNTEDC BOARD, MOUNTEDC BOARD, MOUNTEDC BOARD, MOUNTEDC BOARD, MOUNTED

4-382-854-11 SCREW (M3X10), P, SW (+)

CAPCAPCAPCAPCAPACITACITACITACITACITOROROROROR

C1751 1-107-652-11 ELECT 10µF 20% 250VC1752 1-162-114-00 CERAMIC CHIP .0047µF 2KVC1755 1-107-667-11 ELECT 2.2µF 20% 160V

CONNECTOR CONNECTOR CONNECTOR CONNECTOR CONNECTOR

CN1751 1-564-509-11 PLUG, CONNECTOR 6PCN1752 1-564-508-11 PLUG, CONNECTOR 5PCN1753 1-695-915-11 TAB (CONTACT)CN1754 1-695-915-11 TAB (CONTACT)CN1754 1-695-915-11 TAB (CONTACT)

DIODEDIODEDIODEDIODEDIODE

D1754 8-719-901-83 DIODE 1SS83TDD1755 8-719-901-83 DIODE 1SS83TDD1756 8-719-901-83 DIODE 1SS83TDD1758 8-719-302-43 DIODE RGP10GPKG23

ICICICICIC

IC1751 8-759-562-43 IC TDA6108JF/N1B

JACKJACKJACKJACKJACK

J1751 1-251-688-11 SOCKET, CRT

COILCOILCOILCOILCOIL

L1751 1-408-613-31 INDUCTOR 68µH

RESISTORRESISTORRESISTORRESISTORRESISTOR

R1756 1-260-328-11 CARBON 1K 5% 1/2WR1757 1-260-328-11 CARBON 1K 5% 1/2WR1758 1-260-328-11 CARBON 1K 5% 1/2WR1759 1-260-087-11 CARBON 100 5% 1/2WR1760 1-260-123-11 CARBON 100K 5% 1/2W

R1761 1-216-392-11 METAL CHIP 1.8 5% 3WR1763 1-247-807-31 CARBON 100 5% 1/4WR1764 1-247-807-31 CARBON 100 5% 1/4WR1765 1-247-807-31 CARBON 100 5% 1/4WR1770 1-260-132-11 CARBON 560K 5% 1/2W

ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES AND PAND PAND PAND PAND PACKING MAACKING MAACKING MAACKING MAACKING MATERIALSTERIALSTERIALSTERIALSTERIALS

1-417-182-11 CONVERTER (EAC-25)1-501-730-41 ANTENNA, TELESCOPIC

* 4-061-391-01 CUSHION, LOWER ASSY* 4-061-392-01 CUSHION, UPPER ASSY* 4-061-395-12 CARTON, INDIVIDUAL

4-081-454-41 MANUAL, INSTRUCTION* 4-377-015-01 BAG, PROTECTION

REMOTE COMMANDERREMOTE COMMANDERREMOTE COMMANDERREMOTE COMMANDERREMOTE COMMANDER

1-475-632-11 REMOTE COMMANDER (RM-Y156)9-939-830-11 BATTERY COVER (for RM-Y156)

!"

— 86 —

NOTES:NOTES:::::

— 50 —


Sony CorporationSony CorporationSony CorporationSony CorporationSony CorporationSony Technology CenterSony Technology CenterSony Technology CenterSony Technology CenterSony Technology Center

Technical ServicesTechnical ServicesTechnical ServicesTechnical ServicesTechnical ServicesService Promotion Dept.Service Promotion Dept.Service Promotion Dept.Service Promotion Dept.Service Promotion Dept.9-965-900-019-965-900-019-965-900-019-965-900-019-965-900-01

EnglishEnglishEnglishEnglishEnglish2000KJ74048-12000KJ74048-12000KJ74048-12000KJ74048-12000KJ74048-1

Printed in U.S.A.Printed in U.S.A.Printed in U.S.A.Printed in U.S.A.Printed in U.S.A.© 2000.1© 2000.1© 2000.1© 2000.1© 2000.111111

Date post:	01-Jan-2020
Category:	Documents
Upload:	others
View:	40 times
Download:	4 times

SERVICE MANUAL BA-4D CHASSIS - Diagramas dediagramas.diagramasde.com/televisores/KV21ME43.pdfSERVICE...

Documents