SfB Orbis Commercial Range - RIBA Product Selector · Within the Orbis Commercial range is a...

www.laidlaw.net

UniclassL4181

EPICD181

CI/ SfB(31.5) X

Orbis Commercial Range

architectural ironmongery accesscontrol

handrail &balustrading

doorsetsolutions

architecturalironmongery

1

2

3

4

accesscontrol


doorsetsolutions


1

2

3

4

1 www.laidlaw.net

www.laidlaw.netTHE LAIDLAW SERVICE

Laidlaw is the leading specifier, distributor and technical service provider of architectural hardware to the UK construction industry. Laidlaw is able to offer a wide range of architectural products that combine design and function across a broad band of product categories. This is achieved by working closely with manufacturing partners ensuring consistent quality and performance are achieved from the products offered and by keeping up to date with market requirements and technical specifications to ensure Laidlaw remains at the forefront of the markets it serves.

In addition to the renowned Orbis brand the Laidlaw portfolio also incorporates specialist product areas such as Electronic Access Control and Anti-Ligature fittings. Laidlaw is also able to offer a comprehensive system of Orbis Timber Doorsets which are fully compatible with the Orbis range of architectural hardware.

For further information on any of the Laidlaw products and services, please refer to the full range of product brochures or alternatively call one of the Laidlaw branches nationwide as listed on the back page of this brochure.

Specification AdviceLaidlaw's team of GAI trained consultants is available to assist with all of the detailed product enquiries associated with the increasingly complex subject of hardware specification. Whether it be advice on product compliance for Disability Discrimination Act (DDA) applications or test certification for fire door applications, your local Laidlaw Technical Consultant is always on hand to guide you to the most appropriate specification.

Product DevelopmentOrbis products are subject to continual design and manufacturing development in order to improve performance or to meet the changing demands of standards, testing or other building legislation.

Project ManagementHaving provided guidance in the specification and selection of appropriate products, Laidlaw's scheduling team will produce fully detailed, door by door ironmongery schedules along with a full bill of materials. Laidlaw will then project manage the supply of product including the manufacture of special or bespoke items; supply of relevant installation drawings; and, where necessary, certification and delivery schedules.

CPD seminarsLaidlaw is a RIBA approved provider of CPD seminars and is able to offer specifiers seminars and workshops on a wide range of hardware related subjects including DDA, Doc M and BS 8300 compliance.

Packaging and DeliveryLaidlaw will work alongside the customer's project management team to ensure the product arrives on site in the most appropriate form. This could include labelling to the architect's door numbers, or already installed on Orbis Timber Doors. Laidlaw will ensure deliveries are made in full and on time.

www.laidlaw.netORBIS COMMERCIAL - CONTENTS

2 www.laidlaw.net

THE LAIDLAW SERVICE 1

ORBIS COMMERCIAL INTRODUCTION 3 - 5

LEVER FURNITURE 6 - 8

PULL HANDLES 9 - 11

PUSH PLATES, KICKING PLATES & FIXINGS 12

OVERHEAD DOOR CLOSERS 13

ELECTROMAGNETIC DOOR CLOSERS 14

FLOOR SPRINGS 15 - 16

FIRE DOOR CONTROLS 17

HINGES 18

MORTICE CYLINDER LOCKCASES 19 - 20

CYLINDERS & REBATE SETS 21

SIGNS & SYMBOLS 22 - 24

DOOR STOPS & HOLDERS 25

PULLS, HOOKS & WC FITTINGS 26

FLUSH & SLIDE BOLTS 27

PANIC EXIT HARDWARE 28 - 36

STANDARDS & BS EN CLASSIFICATIONS 37 - 38

DDA, APPROVED DOC. M & BS 8300 39 - 41

INDEX 42

A comprehensive and fully co-ordinated range of architectural hardware defined by a simple and timeless aesthetic. This visual clarity is combined with high quality performance which lends itself to a wide range of applications from contemporary commercial offices to public buildings.

Orbis Commercial

Quality of design, manufacture, finish and performance are provided in equal measure in Orbis Commercial, with most components available in Satin or Polished Stainless Steel or in a Silk Anodised Aluminium finish.

Front cover - Orbis 54 801.19FRS lever on fixed rose and 51 800.25 lever turn escutcheon in Polished Stainless Steel This page - Orbis 54 801.22FRS lever on fixed rose with 51 800.3 Euro profile cylinder escutcheon in Satin Stainless Steel

ORBIS COMMERCIAL - INTRODUCTION

3 www.laidlaw.net

www.laidlaw.net

Within the Orbis Commercial range is a selection of lever and pull handle designs and an advanced system of door closers including many which will enable building owners to satisfy their obligations under the Disability Discrimination Act.

Co-ordination of design and finish is achieved across a full range of products ensuring integrated Orbis Commercial products can be specified for the full hardware requirement of most buildings.

Each component in the Orbis Commercial range is designed for maximum performance. Products are tried and fully tested to the latest BS EN standards with full certification and CE marking where applicable.


4 www.laidlaw.net

a. Orbis 37 801.1 radius corner hinge in Satin Stainless Steelb. Softline electromagnetic hold-open door closer in Satin Stainless Steel finish SS7c. Orbis 53 822.45 bolt through pull handle used with deadlock 12 851 with Euro profile cylinder and 51 800.3 escutcheon

b c

a

Orbis Commercial door furniture can be completely integrated with the Orbis Timber Doorset Range. Factory preparation for the hardware ensures perfect installation to maximise the high performance and aesthetics of the Orbis Commercial Range. Please refer to our Orbis Timber Doorsets brochure.

www.laidlaw.net

BS EN Performance standards

Many of the product types within the Orbis Commercial range have been developed specifically to meet or exceed the latest European Standards. Where different grades of compliance are applicable, this will be indicated in the description against each item. More detailed information on standards and BS EN Classifications can be found on page 37 & 38.

CE Marking

Where CE marking is permitted, items are marked with the CE icon. The CE classification is indicated against each item where this is appropriate. Further information on CE marking and classifications can be found on page 37.

Fire Testing

Fire testing is an ongoing process with Laidlaw. Many of the Orbis Commercial hardware items have been included on timber fire door tests up to 2 hours and on steel fire doors up to 4 hours. The icon indicates the item has been successfully included in fire tests and the brief details of these are included in the general descriptions.

DDA, Approved Doc. M & BS 8300

The principal of ensuring buildings are accessible to able and less able people alike is manifest in Approved Document M of the Building Regulations and with further guidance inBS 8300 which contains specific dimensional information for certain items of architectural hardware. The disabled symbol is used throughout this document to identify those Orbis Commercial items which conform to the requirements of Approved Document M and are therefore appropriate for use in DDA applications.Further information can be found on pages 39 to 41.

Materials & Finishes

Orbis Commercial products are manufactured using only the highest grade materials including Grade 304 and Grade 316 stainless steel. The range is available in Satin Stainless Steel, Polished Stainless Steel and Silk Anodised Aluminium.

SS7 Satin Stainless Steel

PS7 Polished Stainless Steel

SA7 Silk Anodised Aluminium

The products listed within this publication are subject to a 10 year guarantee against defects proved to be the result of faulty manufacture or defective materials unless otherwise stated. Extended guarantees can be obtained for specific projects on application via your Laidlaw Technical Consultant and subject to an agreed maintenance programme.

Ordering Products

When ordering products from the catalogue remember to specify the finish code after the product code - e.g 53 833.30BBPS7

In certain cases, an applied finish is used. These are carefully selected to match the main hardware finishes.


5 www.laidlaw.net

Above - 53 822.45BB pull handles in Polished Stainless Steel

Dimensions

All dimensions shown throughout this brochure are in mm.

www.laidlaw.net

www.laidlaw.netORBIS COMMERCIAL - LEVER FURNITURE

6 www.laidlaw.net

The essence of the Orbis Commercial range is a series of timeless round bar lever handles which are supplied pre-fixed to the rose mounting. These assemblies give specifiers and installers the benefits of:

• Simplifiedspecificationwith complete lever and rose assemblies with spindle and fixings• Easierandquickerinstallation• Greateraccuracyofinstallation• Improvedstrengthanddurability

Orbis Commercial lever handle assemblies have the following features

• Allleversarecirclipfixedtothe rose inner • Phosphorbronzebearing washers are captive in the assembly and provide extra durability as standard• Improved3pointfixing - Levers pre-fixed to rose - Secure M4 bolt through rose fixings at 38mm centres - Break through grub screw fixing into spindle• SuppliedwithM4boltthrough fixings for back to back assembly and optional face fixing screws• Snaponrosecoverconceals fixings• Fixingcentres(38mm) compatible with all major lockcase ranges• Spindlesforspecificapplications are available (see page 8)

Lever is circlip fixed to the rose inner

M4 fixing bolts securely connect each rose through the lock case

Break through grub screw in each lever pierces the spindle to lock the 2 levers

together

Phosphorbronzebearingwasheris concealed within the rose

assembly

Push-on covers conceal all rose fixings

www.laidlaw.net

7 www.laidlaw.net

ORBIS COMMERCIAL - LEVER FURNITURE

• Roundbarstraightleverhandles pre-fixed to 5mm concealed fixing roses• 8mmspindlesupplied• SS7&PS7finishesareGrade 316 stainless steel• Exceedstherequirementsof BS EN 1906 - grade 4 (highest grade)

Please note, all levers are supplied with "break through" type spindle for secure grub screw fixing.

Lever Handle - Straight

60/6

5

134/136

Diameter(mm)Item no.

54 800.19FRS

54 800.22FRS

19

22

Specification adviceWhen used with Orbis Commercial escape sashlock please specify suitable split follower spindles

FPL3.1 - for doors 38 - 54mm thickFPL3.2 - for doors 55 - 65mm thick

Ø

• Roundbar‘returntodoor’ lever handles pre-fixed to 5mm concealed fixing roses• 8mmspindlesupplied• SS7&PS7finishesareGrade 316 stainless steel• Exceedstherequirementsof BS EN 1906 - grade 4 (highest grade)• Complieswiththedimensional requirements of BS8300

Lever Handle - Return to door

60/6

5 Ø

134/136

SS7PS7 UnitItem no.

54 801.19FRS

54 801.22FRS

pair

pair

SA7

Finishes

••

••

Diameter(mm)

19

22

SS7PS7 Unit

pair

pair

SA7

Finishes

••

••

Return to door lever handles are available pre-fixed to Orbis insert roses for use with the Orbis Premier flat backplate system. For further details please refer to our Orbis Premier brochure.

Lever Handle - On insert rose

60/6

5 Ø

134/136

SS7PS7 UnitItem no.

54 850.25FRS pairSA7

Finishes

•

Diameter(mm)

18 x 25

Specification adviceFor half set applications please specify suitable spindles from page 8 and 51 800.0 blank rose to allow use of bolt through fixings.

• Ellipticalsection‘returntodoor’ lever handle pre-fixed to 5mm concealed fixing roses• Suitableforusewithallroseand plate mountings (see pages 7-9)• 8mmspindlesupplied• AvailableinSA7finishonly• Exceedstherequirementsof BS EN 1906 - grade 4 (highest grade)• Complieswiththedimensional requirements of BS8300

Lever Handle - Return to door

65

25

136

Diameter(mm)Item no.

54 801.19FRS9

54 801.22FRS9

19

22

SS7PS7 Unit

pair

pair

SA7

Finishes

••

5

52

2

52

5

50

52

5

Please note: FRS Suffix denotes levers are circlip fixed to Orbis Commercial Concealed roses.

www.laidlaw.net

8 www.laidlaw.net

ORBIS COMMERCIAL - LEVER FURNITURE

• Suitableforuseinconjunction with all Orbis Commercial rose mounted lever handles or with pull handles• Snaponcoverconcealsfixings• Thumbturnscompletewith5mm spindle and 8mm adapter suitable for door thicknesses from 35 to 54mm • Suppliedwithself-tapping screws for face fixing

Escutcheons - Concealed fixing

FunctionItem no.

51 800.0 blank

51 800.1

51 800.2

51 800.3

51 800.4

51 800.5

51 800.15

lever key

oval profile

euro profile

indicator/release

standard turn

large turn

Specification adviceExtended bathroom turn 51 800.25 is recommended for special needs applications.

SS7PS7 Unit

singleSA7

Finishes

••single••single••single••single••single••single••

51 800.25 extended turn single••

As standard all levers are supplied with FPL1.1 'Break Through' spindle and FPL1.1 back to back fixings for doors 38mm to 54mm thick and face fixing screws.

Alternative fixing packs are available for thicker doors, for single sided applications or for use with locks which have a split follower function.

Fixing Packs

DescriptionItem no.

FPL1.1 'Break Through' spindleBack to back fixings bolts and face fixing woodscrews

Door Thickness

38 - 54mm

FPL1.2 'Break Through' spindleBack to back fixings bolts and face fixing screws

55 - 65mm

FPL2.1 Swivel half spindle for single sided lever operation and face fixing woodscrews

38 - 54mm

FPL2.2

FPL3.1 Split spindleBack to back fixings bolts and face fixing woodscrews

38 - 54mm

FPL3.2 Split spindleBack to back fixings bolts and face fixing woodscrews

55 - 65mm

Swivel half spindle for single sided lever operation and face fixing woodscrews

55 - 65mm

FPL5.2 Adapter to convert 5mm bathroom spindle to suit 8mm follower

n/a

43 26

16

5

16

51 800.0 51 800.1 51 800.2 51 800.3

51 800.5 51 800.4 51 800.15 51 800.25

60.5

5

105 (FPL1.1) 120 (FPL1.2) 8

FPL1

105 (FPL1.1) 120 (FPL1.2)

FPL2

FPL3

FPL5.2

8

cut on site

15

30 8

Back to back fixing bolts

Face fixing screws

52

52

10

www.laidlaw.net

9 www.laidlaw.net

Centres(mm)

SS7PS7 UnitItem no.

53 819.15 150 singleSA7

Finishes

•53 819.18 single•53 819.24 single•

180

240

Bolt through fixing

Specification adviceFor compliance with DocM, we recommend the use of pull handles with 450mm centres or longer.Pull handles are supplied with the appropriate fixing packs for bolt through or back to back fixing. If specifying a single bolt through pull handle, appropriate push plates are available for fixing to the push side of the door (see page 12)

Designed to be compatible with all round bar lever handle designs

• Boltthroughorbacktoback fixing options• Choiceoflengthsavailable• Choiceofdiametersavailable• StandardM8fixingpackssuit doors up to 55mm thick - other thicknesses to special order• Alternativefixingtypesarealso available (see page 11)

Please note, these pull handles are also interchangeable with the pull handles and backplate system in the Orbis Premier range. For further details refer to the Orbis Premier Range brochure.

Pull Handles - Round Bar Section

53 819.30 single•300

53 819.45 single•450

•••••

Diameter(mm)

19

19

19

19

19

Centres(mm)

SS7PS7 UnitItem no.

53 819.15 BB 150 pairSA7

Finishes

•53 819.18 BB pair•53 819.24 BB pair•

180

240

Back to back fixing

53 819.30 BB pair•300

53 819.45 BB pair•450

•••••

Diameter(mm)

19

19

19

19

19

Centres(mm)

SS7PS7 UnitItem no.

53 822.18 180 singleSA7

Finishes

•53 822.24 single•53 822.30 single•

240

300

Bolt through fixing

53 822.45 single•450

••••

Diameter(mm)

22

22

22

22

Centres(mm)

SS7PS7 UnitItem no.

53 822.18 BB 180 pairSA7

Finishes

•53 822.24 BB pair•53 822.30 BB pair•

240

300

Back to back fixing

53 822.45 BB pair•450

••••

Diameter(mm)

22

22

22

22

ORBIS COMMERCIAL - PULL HANDLES

53 819.60 single•600 •19

53 819.60 BB pair•600 •19

53 822.60 single•600 •22

53 822.60 BB pair•600 •22

cent

res

4519Ø

cent

res

4522Ø

53 8

19.2

4

53 8

19.3

0

53 8

19.4

5

53 8

19.6

0

53 8

22.2

4

53 8

22.3

0

53 8

22.4

5

53 8

22.4

5

A concealed fixing rose is available for surface mounting pull handles.Designed to be used with 19mm and 22mm round bar pull handles. The 52mm x 5mm rose mounting converts the pull handle to a concealed 'face fixed' pull.

• Slimlinerose• Concealedfacefixings(included)• Suitsallpullhandlelengths• Availableinallfinishes

50 853.19.6 - For 19mm pull handles50 853.22.6 - For 22mm pull handles

www.laidlaw.net

10 www.laidlaw.net

A series of cranked round bar pull handles for single bolt through fixing or fixing back to back

• Suppliedcompletewithfixingsto suit timber doors• Availablein19mmand22mm diameters• Forpush/pullapplicationsselect an appropriate push plate for the other side of the door (see page 12 for further details)• Spareboltthroughfixingpacks are available (see below)

Pull Handles - Cranked

45A

cent

res

ORBIS COMMERCIAL - PULL HANDLES

Item no. Ø Centres Unit

53 219.30 19 300 single

53 219.45 19 450

SS/PS SA

single

53 219.60 19 600 single

53 222.45 22 450

single

53 222.60 22 600

single

single

FinishesBolt Through

••••••

••••••

53 222.30 22 300

Item no. Ø Centres Unit

53 219.30BB 19 300 pair

53 219.45BB 19 450

SS/PS SA

pair

53 219.60BB 19 600 pair

53 222.45BB 22 450

pair

53 222.60BB 22 600

pair

pair

FinishesBack to Back

••••••

••••••

53 222.30BB 22 300

A series of pillar fixed round bar pull handles for single bolt through fixing or back to back

• Suppliedcompletewithfixingsto suit timber doors• Availablein32mmand25mm diameters• Spareboltthroughfixingpacks are available (see below)

Entrance Pull HandlesItem no. A Unit

53 332.1500 1500 single

53 332.1800 1800

SS/PS SA

single

FinishesBolt Through - 32mm Ø

••

••

Item no. A Unit

53 325.1000 1000 singleSS/PS SA

FinishesBolt Through - 25mm Ø

• •

Item no. A Unit

53 332.1500BB 1500 pair

53 332.1800BB 1800

SS/PS SA

pair

FinishesBack to Back - 32mm Ø

••

••

Item no. A Unit

53 325.1000BB 1000 pairSS/PS SA

FinishesBack to Back - 25mm Ø

• •

45

Item no. Description

LA158.19 M6 bolt pack for 19mm pulls (SS & PS only)

LA158.22 M8 bolt pack for all 22mm, 25mm & 32mm diameter pulls & 19mm pulls in SA finish

Bolt Through Fixing Packs

A

90

90

90

125

125

125

A

90

90

90

125

125

125

CA

C

1350

1650

C

850

C

1350

1650

C

850

www.laidlaw.net

11 www.laidlaw.net

FPP3

FPP5

Standard Orbis Commercial 53 800 Series bolt through handles are supplied as standard with fixings FPP3.5 and back to back handles are supplied with fixing pack FPP5.2. Alternativesizesandfixingtypesare also available as shown in the table below.

Pull Handle Fixings FPP1

FPP7

Note: Clearance hole for glass door fixings FPP6 and FPP7 - 14mm Ø

Item no.DescriptionDoor

thickness Pull handles

Pin side

Pin side

Pin side

Thread side

Thread side

Thread side

FPP3.1FPP3.2FPP3.3FPP3.4FPP3.5

Bolt through fixing for timber doors with CSK M8 bolts.

For use with Thread side pull handles only

19 & 22ø53 92253 922

19 & 22ø53 922

40 - 55mm40 - 55mm

35mm45 - 65mm55 - 65mm

FPP6

FPP1Secret face fixing for timber doors with threaded plugs and M8 fixing bolts.

For use with Pin side pull handles only

n/an/a

FPP5.1FPP5.2FPP5.3

Back to back fixing for timber doors with M8 bolt.

For use with one Thread side and one Pin side pull handle.

19 & 22ø53 92253 922

35 - 55mm40 - 55mm

35mm

FPP6.1FPP6.2FPP6.3

Back to back fixing for glass doors with M8 bolt, 13mmØ nylon bush and washers.

For use with one Thread side and one Pin side pull handle.

19ø & 53 92222ø

53 833

10 - 14mm10 - 14mm 10 - 14mmGlass Door

FPP7.1FPP7.2FPP7.3

Bolt through fixing for glass doors with M8 'Pig nosed' bolt.

For use with Thread side pull handles only

19ø22ø

53 833

10 - 14mm10 - 14mm 10 - 14mmGlass Door

FPP2 FPP2M8 x 30mm bolt plus woodscrews to suit concealed roses for 19mmø & 22mmø pull handles

n/an/a

ORBIS COMMERCIAL - PULL HANDLE FIXINGS

Centres(mm)

SS7PS7 UnitItem no.

53 850.30 300 singleSA7

Finishes

•53 850.45 single•450

Bolt through fixing

Designed to be compatible with elliptical lever handle design 54 850.25FRS

• Boltthroughorbacktoback fixing options• Choiceoflengthsavailable• StandardM8fixingpackssuit doors up to 55mm thick - other thicknesses to special order• Alternativefixingtypesarealso available (see below)• AvailableinSA7finishonly

Pull Handles - Elliptical SectionDiameter

(mm)

18 x 25

18 x 25

cent

res

4525

53 8

50.3

53 8

50.4

5

Centres(mm)

SS7PS7 UnitItem no.

53 850.30BB 300 singleSA7

Finishes

•53 850.45BB single•450

Back to Back fixing

Diameter(mm)

18 x 25

18 x 25

Thread side

Thread side

www.laidlaw.net

12 www.laidlaw.net

ORBIS COMMERCIAL - PUSH PLATES & KICKING PLATES

Designed to be used on the push side of the door with a bolt through or concealed rose fixed pull handle on the pull side. Push plate is used to conceal the bolt through pull handle fixing.

• Squareorradiusedcorners• Suppliedwithscrewfixings• Suitsboltthroughhandlesupto 600mm centres

Push Plates

Size(mm)

SS7PS7 UnitItem no.

52 801 350 x 100 singleSA7

Finishes

•52 802 single•52 803 single•

350 x 100

500 x 100

52 804 single•500 x 100

••••

corners

radius

square

radius

square

52 805 single•650 x 100 •radius

52 806 single•650 x 100 •square

Kicking & mid rail plates must be ordered to suit the height and width required. Special designs are also available to order.Plates are supplied with self-tapping wood screws.

Kicking & Mid Rail Plates

Larger pull handles and variants are available to special order. Please contact your Laidlaw Technical Consultant for further information.

Entrance Pull Handles

www.laidlaw.netORBIS COMMERCIAL - OVERHEAD DOOR CLOSERS

Orbis Commercial closers are high specification adjustable power closers which have clean and simple lines, ideally suited for use with Orbis Commercial round bar lever furniture

• Adjustablepowerunits• FullycompliantwithBSEN1154 where stated• Availablewith'Softline'orSquare all-over cover• Capableofmeetingthe requirements for low opening force as required for DDA/ Equality Act applications• CEmarked&CertifireApproved• Fullyadjustableforclosingspeed and latch action• Backcheckfunction• Eachunitsuppliedwithbrackets suitable for fig.1, fig.61 and fig.66 applications• Optionalhold-openarmsets available (please note; closers with hold-open armsets are NOT CE marked)• 2yearguarantee

Door Closers

Insert power size into Classification number

Materials and constructionThe Orbis Commercial Softline closers have cast aluminium bodies with steel covers, arms and brackets.

FinishesSquare and Softline closer covers are available in the following finishes with arms and brackets to match.

SS7 - Satin stainless steelPS7 - Polished stainless steel'Softline' closers are also available in a range of powder coated coloured finishes (please refer to page 35 for colour options).

BS

EN 1

154

Pow

er s

ize

1 20kg

40kg

60kg

80kg

100kg

120kg

2

3

4

5

6

Door width (mm)Door weight (kg)

750m

m

850m

m

950m

m

1100

mm

1250

mm

1400

mm

Specification adviceFixed power closers are best suited to internal applications where traffic levels and draught or air pressure is unlikely to vary and where the door size is known. Adjustable power closers can be adjusted to suit door size and site conditions - variables that may be unknown at the time of specification. Specifying an adjustable closer can therefore help to avoid installing an under-powered or over-powered unit.

Power sizes The dimensions stated in the chart below relate to closers mounted on the pull side of the door (fig.1 applications) only.

BS EN ClassificationsOrbis Commercial Softline closers have been fully tested to the requirements of BS EN 1154 and have been designated with the Classification no. as shown below.Digit3appliestopowersizeanddependsonthe closer specified.

Opening and closing forcesIn order to show compliance with requirements for

accessibility, the force needed to open the door, measured at the leading edge, from 0˚ must be less than 30N (see page 43 for further information). Thesizeofthedoor,theaccuracyofinstallationofthehardware,the presence of smoke or draught seals, the need to latch the door, the location of the door will all have a bearing on the force required to open it and as a consequence it may not be possible to provide a definitive statement as to which closers do or do not meet the opening force requirements of the regulations.

13 www.laidlaw.net

31 807 31 808

3112-484

31 80731 891

31 80831 892

7272

245

307 60

50

Hold-Open closers Hold-Open armsets are available for use with 'Softline' and square covered variants. The use of mechanical hold-open closers is NOT PERMITTED on fire door applications.

Closers Arm Pack

31 807 APH.01

31 808 APH.02

31 891 APH.01

31 892 APH.02

Note: all dimensions include Softline or Square cover

www.laidlaw.net

closers with square covers

closers with 'Softline' covers

Features & Functions

Powersize(seechartabove)

Grade of opening angle (see note #)

Adjustable closing speed

Adjustable latch action

Adjustable back check

Optional hold-open armset

ORBIS COMMERCIAL - OVERHEAD DOOR CLOSERS

31 891

31 807

2 - 4

4

•

•

•

•

31 892

31 808

2 - 6

4

•

•

•

•

Fixed power or spring power adjustable adjustable adjustable

Projecting arm (P) or Track arm (T) P P

14 www.laidlaw.net

BS EN 1154 compliant & CE Marked • •

Designed for use on fire/smoke doors. The unit is controlled by the building fire/smoke detector and alarm system. On operation of the alarm, the integral hold-open mechanism is released and the door closes in the normal manner

• Fixedpowervariants• FullycompliantwithBSEN1154 and BS EN 1155 where stated• CEmarkedwherestatedintable• Fullyadjustableforclosingspeed and latch action• Availableinprojectingarmand track arm configurations• FullyfiretestedtoBSEN1634 and suitable for use on fire doors up to 2hr rating• 2yearguarantee

Electromagnetic Controls

Operating ModesFixed strength projecting arm models are site selectable for either 'hold-open' or 'swing-free' operation. Hold open angle is available from 75˚ up to 105˚. The 'swing-free' facility allows the door to operate as if no closer were fitted. When the power to the closer is cut, or in the event of alarm activation, the closer is re-activated and closes the door.

Materials and constructionThe Softline electromagnetic closers have extruded aluminium bodies with covers, arms and brackets in steel.

Mechanical Controls

27 856

27 853

3

4

•

•

-

fixed

P

•

27 857

27 854

4

4

•

•

-

fixed

P

•

27 858

27 855

5

4

•

•

-

fixed

P

-

--

27 893.3027 892.30

33

33

••

••

--

fixedfixed

TT

--

-

27 894.30

1 - 4

3

•

•

-

adjustable

T

-

Electromagnetic Controls

Electromagnetic hold-open - -

BS EN 1155 compliant & CE Marked - -

•

•

•

•

•

-

•-

-- -

•

- - - -- -

Electromagnetic swing-free - - • • • -• -

# Grade 4 will close a door from 180˚ opening angle. Grade 3 will close a door from 105˚ opening angle

Certifire Approved • • • • • •• •

27 85327 85427 855

27 892.3027 893.30

DDA applicationsBoth operating modes of the electromagnetic

door control facilitate access and are specifically recommended in the Building Regulations as a means of satisfying the opening force requirements.

Electrical requirementsOperating voltage - 24v DC (+10% - 15%) at 2W max. with the exception of 27 894.30 (3.4W max.)

Specification adviceWhen specifying the track arm electromagnetic closer variants please note that 27 892 & 27 893 closers must be specified as either 'Pull Side' or 'Push Side' application as follows:

27 892.30.1 Swing Free Push Side

27 892.30.2 Swing Free Pull Side

27 893.30.1 Hold-Open Push Side

27 893.30.2 Hold-Open Pull Side

27 853 - 27 858 27 892.3027 893.30

7676

280

280 49

49

27 894.30

280

TBA 25

19

32

32

570

www.laidlaw.netORBIS COMMERCIAL - FLOOR SPRINGS

A series of floor springs is available offering a high level of sophisticated door control specifically for high traffic locations. The range includes a wide selection of accessories to suit timber, metal and glass doors.

• Fixedpowersizes3to6suitable for doors up to 300kg• Variablepowerunit,size1-4• FullycompliantwithBSEN1154 and BS EN 1155 where stated• CEMarked• CertifireApproved(cert.no.128)• Fullyadjustableforclosingspeed and latch action• Adjustablebackcheck• Singleactionanddoubleaction• Completewithcementbox• 2yearguarantee

Floor Springs

Features & Functions Item no.

Powersize(seenotebelow)*

Grade of opening angle (see note #)

Adjustable closing speed

Adjustable latch action (15˚ - 0˚)

Adjustable back check

Adjustable delayed closing action

Mechanical hold-open

BS EN 1154 compliant & CE Marked

30 864/FS30 865/FS30 866/FS

4 / 5 / 6

4

•

Fixed power or spring power adjustable fixed

BS EN 1155 compliant & CE Marked •

Certifire Approved for fire doors •

Electromagnetic OptionElectromagnetic hold-open and free-swing versions are available. When connected to the building fire alarm/detection system, the door can be allowed to swing free or be held open in high traffic locations. On activation of the fire/smoke detection system the electromagnet will be deactivated and the door will close under normal spring power. The hold open position is adjustable between 75˚ and 180˚.Electromagnetic versions conform to EN 1155.Complete with plug connector for 24V supply.

30 864/HO30 865/HO30 866/HO

4 / 5 / 6

4

•

•

•

•

fixed

•

•

30 76430 764/DA30 764/HO

1-4

4

•

•

30 764/HO

•

spring

30 864/F30 865/F30 866/F

4 / 5 / 6

4

•

•

•

fixed

•

30 863/DA30 864/DA30 866/DA

3 / 4 / 6

4

•

•

•

•

fixed

Electromagnetic hold-open

•Electromagnetic swing-free

•••••

•

Max. leaf weight (kg) 300300120300300

Power size *With the exception of the 30 764 model, the Orbis Commercial floorsprings are fixed power units and must be ordered to suit eachapplication.Usetheproductreferencefromthechartaboveaccordingtothepowersizerequired.For example, a 30 863/DAispowersize3;a30 864/DAispowersize4;and30 866/DAispowersize6.

Electrical requirementsOperating voltage 24vDC + 15%, residual ripple max. 30%Power input 2.3W

15 www.laidlaw.net

Clockwise closing

Left handISO. 5.0

Anti-clockwise closing

Right handISO. 6.0

30 764/DA

# Grade 4 will close a door from 180˚ opening angle

---

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

www.laidlaw.netORBIS COMMERCIAL - FLOOR SPRINGS

BS

EN 1

154

Pow

er s

ize

1 20kg

40kg

60kg

80kg

100kg

120kg

2

3

4

5

6

Door width (mm)Door weight (kg)

750m

m

850m

m

950m

m

1100

mm

1250

mm

1400

mm

Power sizesOrbis floorsprings are fixed power (except 30 764 which is adjustable power). Please contact your Laidlaw Technical Consultant for further information.

AccessoriesA wide range of accessories is available for use with the Orbis Commercial range of floorsprings. The selection of appropriate accessories relates to the type of door and the use of single action or double action doors.For glass door fittings and additional accessories for metal, glass or timber doors please contact your Laidlaw Technical Consultant for further advice.

Description FinishItem no.

29 012 Door strap for bottom of door - suitable for flush doors Zinc plated

Accessories for single action doors

29 013 Top centre with eccentric pin. Suitable for flush doors - non handed Zinc plated

29 016/L Cover cap for single door strap - Left Hand Mill Finish

29 016/R Cover cap for single door strap - Right Hand Mill Finish

29 017 Double cover caps for top centres Mill Finish

C

AB

D

E

30 764

A 50

Dimensions (mm)

B 82

C 285

all others

60

78

341

D 308 358

E 105 105

16 www.laidlaw.net

Description FinishItem no.

29 010 Door strap for bottom of door Zinc plated

Accessories for double action doors

29 011 Adjustable top centre c/w frame and door portion Steel

Accessories for single action doors Accessories for double action doors56

56

51 min.

29 012

29 013

29 011

29 010

35

235

2024

www.laidlaw.net

Wall and floor mounted electromagnetic door holders are used in conjunction with either an overhead door closer or floor spring. When connected to the building fire/smoke detection and alarm system they will allow a fire door in a high traffic location, such as a corridor, to be held open during normal use. In an emergency situation the holder is de-activated and the door closes under the action of the door closer.The door can always be pulled manually off hold open to allow the door to close.

• FullycompliantwithBSEN1155• CEMarked• Surfaceorsemirecessedwall mounting• Built-intestbuttontosimulate alarm conditions• Floormountingbracketoption• Max.holdingforce200Newtons• 2yearelectricalguarantee

Electromagnetic Door Holders

ORBIS COMMERCIAL - FIRE DOOR CONTROLS

Specification adviceThe hold-open device should be sited at the same level as the closing device (or as close as practical) to minimise the stress placed on the door whilst it is being held open. A skirting mounted hold-open unit used in conjunction with an overhead door closer could induce the door to twist, causing the door to fail to close fully.

Power for the electromagnet must not be drawn from the fire alarm system except in alarm condition. A separate power supply is designed specifically for the electromagnetic units (see below).

DescriptionItem no.

27 533 wall mounted - semi recessed

SSPCP SE

Finish

••27 533.1 ••surface mounting case for use

with 27 533

Electrical requirementsOperating voltage - 24vDC (22v min / 30v max.) - 50mA nominalA series of transformer/rectifiers with facilities for plug in relays are available to power single or multiple units.

For hold-open units Max. no of unitsItem no.

27 114 27 533 & 27 534 4

Transformer/rectifier

27 120 27 533 & 27 534 20

27 150 27 533 & 27 534 50

BS EN ClassificationsOrbis electromagnetic hold-open units have been fully tested to the requirements of BS EN 1155 and have been designated with the Classification no. as shown below.

27 533FMB floor mounting bracket ••

86

17 www.laidlaw.net

27 53327 533.1 27 533 FMB

FinishesOrbis electromagnetic hold-open units are available in applied finishes. SS and PCP are electro plated to match SS7 and PS7. The SE finish is a sprayed silver finish to suite with SA7 products.

3113-653

24 25

46

www.laidlaw.net

Size (mm)Item no.

37 800.1 102 x 76mm

37 801.1

37 810.1

102 x 102mm

102 x 76mmwith stud

Radiused corner hinges

• Ballbearinghinge• ExceedBSEN1935grade13 suitable for doors up to 120kg (Weight based on 3 hinges per door leaf) • TestedtoBS7352class13• Radiusedandsquarecorner versions • Stainlesssteelversionsare Grade 304• Suppliedwith32mmxNo.10 pozidrivestainlesssteel woodscrews• Machinescrewsavailableon request for metal doors/frames• Securitystudoption

Ball Bearing Hinges

• Risingbutthingessuitablefor light internal doors, providing a soft 'self closing' action • MustbespecifiedasClockwise Closing (CW) or Anti-Clockwise Closing (ACW)• Stainlesssteelversionsare Grade 304• Suppliedwith32mmxNo.10 pozidrivezincplated woodscrews• Maximumadjusteddoor weight 60kg• 2hingesperleafrecommended• Requireregularmaintenance• 1yearguarantee

Rising Butt Hinges

ORBIS COMMERCIAL - HINGES

SS7PS7 Unit

singleSA7

Finishes

single

single

•••

Size (mm)Item no.

37 800.2 102 x 76mm

37 801.2

32 810.2

102 x 102mm

102 x 76mmwith stud

Square corner hingesSS7PS7 Unit

singleSA7

Finishes

single

single

•••

HandingItem no.

37 879.5 CW closing

37 879.6 ACW closing

Rising butt hinges

SSS Unitsingle

Finishes

single••

43

102

10mmR

102

10mmR 3010

2

18 www.laidlaw.net

102

29

102

37 801.1 37 800.1

37 810.2 37 800.2

Clockwise closing

Left handISO. 5.0


Right handISO. 6.0

37 879.5 37 879.6

FinishesSSS - Satin Stainless Steel

Specification adviceBall bearing hinges are suitable for all types of internal and external applications.When used on fire doors, intumescent packs need to be specified IP H1 - to suit 76 x 102mm hingesIP H2 - to suit 102 x 102mm hinges

Note: Each intumescent pack contains intumescent material for a pair and a half of hinges.

For 30 min. fire door applications specify 1 intumescent pack per pair and a half of hinges.For 60 min. fire door applications specify 2 intumescent packs per pair and a half of hinges.

2.5

2.5

www.laidlaw.netORBIS COMMERCIAL - MORTICE CYLINDER LOCKCASES

An integrated series of modular euro profile cylinder mortice lockcases designed to meet the requirements of BS EN 12209

• Precisionmanufacturedslimline case with 6 function variants• Modulardesignallows interchangeability of lock models• Meetstherequirementsof BS EN12209 and with the dimensional characteristics of DIN18251 • 60mmbackset• 72/78mmcentres• Boltthroughfixingsatleverand cylinder positions• 20mmdoublethrowdeadbolt• Quickreversiblelatchboltwithout opening the lockcase• Nightlatchwithhold-back function• Springingsuitableforunsprung lever furniture• Cylinderoperatesdeadboltand latchbolt• Singlepieceforendingrade304 stainless steel with matching strike plate• Optionalradiusedorsquare forend styles• MeetsBS8300dimensional recommendations making it suitable for DDA applications• Rebatekitsavailable,see page 21

Euro Profile Mortice LockcasesFunctionItem no.

13 861R latch only

sashlock

deadlock

bathroom lock

cyl.nightlatch*

SS7 Unitsingle

SA7

Finishes

•single•single•single•single•

escape sashlock single•

11 861R

12 861R

13 862R

10 862R

11 863R

Radiused forend

FunctionItem no.

13 861 latch only

sashlock

deadlock

bathroom lock

cyl.nightlatch*

SS7 Unitsingle

SA7

Finishes


escape sashlock single•

11 861

12 861

13 862

10 862

11 863

Square ended forend

Specification adviceEscape sashlocks do not have split follower function. It must be used with a half set of levers on the inside of the door. It must not be used with an internal cylinder thumbturn or external handle.

When used on fire doors, intumescent packs need to be specified IP L3 - For Orbis Commercial Sashlock, Bathroom Lock and Nightlatch lockcases

IP L4 - For Orbis Commercial Deadlock and Latch lockcases

For 30 min fire door applications specify 1 pack per lockcase.For 60 min fire door applications specify 2 packs per lockcase.

19 www.laidlaw.net

11 861R

25

165 15

0

235

4621

,5

3235

4572

15

4572

3532 46

21,5

6378

165

152093

3

38

60

38

93

3

60

863

72

185

12

8

11 861R - sashlock * Cylinder nightlatches have hold-back function

www.laidlaw.netORBIS COMMERCIAL - MORTICE CYLINDER LOCKCASES

Specification advicePlease note that a conversion plate is fitted to the lockcase suitable for euro profile cylinders. The plate must be removed for use with oval profile cylinders.

An integrated series of modular cylinder mortice lockcases which are suitable for use with oval or euro profile cylinders

• Designedtomeetthe requirements of BS EN 12209• Modulardesignallows interchangeability of lock models• 57mmbackset• Boltthroughfixingsatleverand cylinder positions at 38mm centres (excluding nightlatch)• Singlethrowdeadboltwithsaw resistant rotating steel pins• Quickreversiblelatchboltwithout opening the lockcase• Springingsuitableforunsprung lever furniture• Patentedadjustablespring tension allows fine tuning of the lock springing to suit heavier or drooping levers• 2partforendingrade316 stainless steel with matching strike plate• Optionalradiusedorsquare forend styles• Suitableforusewith56mm centres oval profile or 57mm centres euro profile cylinders• Nightlatchhasanti-thrustand hold-back functions• Rebatekitsavailable,see page 21

Dual Profile Mortice Lockcases

FunctionItem no.

13 851R latch only

sashlock

deadlock

bathroom lock

nightlatch

SS7 Unitsingle

SA7

Finishes


11 851R

12 851R

13 852R

10 851R

Radiused forend

FunctionItem no.

13 851 latch only

sashlock

deadlock

bathroom lock

nightlatch

SS7 Unitsingle

SA7

Finishes


11 851

12 851

13 852

10 851

Square ended forend

56/5

7

38

248

165 14

6

108

16

5724

108

16

57

76

25 25

13 13

38

57

76

20 www.laidlaw.net

12 851 11 851

12 851 - deadlock

11 851

www.laidlaw.netORBIS COMMERCIAL - CYLINDERS & REBATE SETS

Specification adviceSelect the cylinder length to suit the combined thickness of the door and the hardware. The minimum cylinder projection is required for visual and security reasons.For locks fitted off-centre within the door thickness, offset cylinders are available to special order.

Suitable for use with all Orbis Commercial cylinder mortice lock cases

• Patented6pinsecurityuntil December 2014• EN1303Grade6Keysecurity• EN1303Grade6Durability• EN1303Grade2Attack Resistance (when used with a 01 810 security escutcheon) • Uniqueraisedplugwithslotted face• Improvedkeystrength• Patentedkeyblanksare restricted for greater key control and security• Europrofile,ovalprofile,rimand rim mortice cylinders available • Rangeofeuroandovalprofile cylinder lengths• Availableasmasterkeyedor standard differ variants. Supplied with 2 differ keys• Availableinsatinnickeland polished chrome to match SS7 and PS7 finishes• 2yearguarantee

Cylinders

LengthSingle cylinder

40mm

45mm

50mm

01 802.1

01 802.2

-

01 803.1

01 803.2

01 803.3

Euro profile

Oval profile

LengthDouble cylinder

60mm

70mm

80mm

01 822.1

01 822.2

01 822.3

01 823.1

01 823.2

01 823.3

Euro profile

Oval profile

LengthSingle thumbturn

40mm

45mm

50mm

01 812.1

01 812.2

-

01 813.1

01 813.2

01 813.3

Euro profile

Oval profile

LengthDouble cylinder & turn

60mm

70mm

80mm

01 832.1

01 832.2

01 832.3

01 833.1

01 833.2

01 833.3

Euro profile

Oval profile

Rim cylinder

01 805.1

Rim mortice cylinder

The rebate set will convert the meeting stiles of a rebated pair of doors so that the standard mortice lock can be used.

• Availablein13mmand25mm rebate depths (see chart)• Suitableforsquareforendlocks only• Steelbackboxavailable

Rebate Sets for Cylinder Locks

variable10

3460/70/8060/70/80

32Ø 2734Ø 25

21 www.laidlaw.net

01 803.1 01 823.1 01 833.1 01 805.1

01 804.1

Cam lock

01 806.1

Cam locksWhere a complete masterkeyed system is required, even cupboards or cabinets can be included on the system

Scandinavian cylindersWhere scandinavian locks are used, corresponding cylinders are available to suit internal and external variants

2225

30

19.5 25 25

01 804.1 01 805.1

01 806.1

ScandinavianInternal

01 807.1

ScandinavianExternal

01 808.1

ScandinavianPair - Int/Ext

01 809.1

01 810

08 851 Rebate kit13mmLock ref:

10 862 13 005

11 861 13 003

11 863 13 003

12 861 13 007

13 861 13 005

13 862 13 003

13 851 08 855

Rebate kit25mm

Steel Back Box

25 006 14 023

25 004 14 022

25 004 14 022

25 008 14 023

25 006 14 023

25 004 14 022

08 854

11 851 08 853 08 852

12 851 08 857 08 856

13 852 08 853 08 852

10 851 08 851 08 850

www.laidlaw.netORBIS COMMERCIAL - SIGNS & SYMBOLS

22 www.laidlaw.net

A comprehensive range of face fixed symbols for general application in WC and washroom facilities and on fire door applications.

• Suppliedwithfacefixingscrews• 76mmdiameter• Availableinallfinishes• Firesignscomplywith BS5499:5 2002

Symbols

SymbolItem no.

60 601 Fire Door Keep Shut

60 602 Fire Door Keep Locked

SSPS

SAPA Unit

single

Finishes

•single•

••

60 603 Fire Door Keep Locked Shut single••60 604 Keep Locked Shut single••60 605 Male single••

Orbis tactile signs incorporate a combination of visual identification, Braille, raised symbols and letters to assist visually impaired people to locate facilities within a building.

• Highcontrastivoryondarkblue signs• Selfadhesivebackforeasyfixing to most flat surfaces

Tactile Symbols SymbolItem no.

60 001.1 male

60 001.2 female

Unitsingle

PVC

•single•

60 001.3 disabled single•60 001.4 baby change single•60 001.7 telephone single•

60 606 Female single••60 607 Disabled single••60 608 Unisex single••60 609 Shower single••60 617 Automatic Fire Door Keep Clear single••60 618 Fire Door Keep Clear single••60 619 Fire Exit Keep Clear single••60 620 Fire Door Keep Closed single••60 621 Baby Change single••60 622 WC single••60 623 Push single••60 624 Pull single••

60 001.3 60 001.2

60 601 60 602 60 603 60 604 60 617

60 618 60 619 60 620

60 605 60 606 60 607

60 608 60 609 60 621

60 622 60 623 60 624

Disability DiscriminationThe use of tactile signage is a requirement of Part M2 of the Building Regulations 1991 and it is recognises the use of tactile signs ensures people with visual impairments are considered under the requirements of the Disability Discrimination Act.

Slide in inserts are suitable for engraving or for applied lettering/graphics.

• Screwfixingsareconcealedby the insert• Clearperspexinserttoallow cards to be inserted

Card frames

DescriptionItem no.

60 903.1 Card frame 60 x 60mm

SS7PS7 Unit

singleSA7

Finishes

•60 903.2 Card frame 180 x 60mm single•


Fire exit signs are used on doors, emergency or fire escape routes.The Orbis Commercial range of fire exit signs incorporates 75mm letter height to comply with Fire Precautions Act 1971 and include 'symbol only' versions to suit EC Council Directives.

• DesignedtocomplywithEC Council Directive 92/558/EEC and Fire Precautions Act 1971• Suppliedwithwoodscrews or self adhesive pads for alternative fixing method • Allsignsavailableinthefollowing finish and fixing combinations:

Aluminium - screw fixed Aluminium - self adhesive Vinyl - self adhesive Plastic - screw fixed Plastic - self adhesive

Photoluminescent SignsThe signs shown on this page are also available in photoluminescent material which are energised by exposure to light. When the light source fails, the material emits a highly visible luminescense which lasts for several hours. The natural photoluminescent daylight colour of light green has been officially recognised in BS 5499 and BS 5378 as suitable for use in safety signs.

SizesThe standard signs are available in thesizesshown.Allthesignsareavailableinothersizestospecialorder.

Fire Exit Signs

60 056 - 150mm x 280mm60 055150mm x 150mm

60 051225mm x 225mm

60 011.1 - 100mm x 630mm

60 012.1 - 100mm x 630mm

60 013.1 - 100mm x 630mm

60 014.1 - 100mm x 630mm

60 014.2 - 200mm x 600mm

60 052.1 - 65mm x 280mm60 052.2 - 130mm x 565mm

60 054 - 140mm x 470mm

60 412.1 - 60 412.2 60 411.1 - 60 411.2

60 414.1 - 60 414.2 60 413.1 - 60 413.2

60 417.1 - 60 417.2 60 416.1 - 60 416.2

60 415.1 - 60 415.2

Dimensions .1 100mm x 240mm .2 150mm x 360mm

60 418.1 - 60 418.2

60 071 - 75mm x 150mm 60 070 - 75mm x 150mm 60 072 - 75mm x 150mm 60 073 - 75mm x 150mm

60 062 - 100mm x 140mm 60 063 - 100mm x 140mm60 060 - 100mm x 140mm

Please NoteThe signs shown on this page are for identification purposes only. They are not shown to scale, please refer to the dimensions shown.

23 www.laidlaw.net

60 411.1 - 60 411.2

60 011.1


Safety and security signs are mandatory and require a specific behaviour or action to be taken. By separating the symbol and the wording the signs are designed to comply with EC Council Directive 92/58/EEC.

• DesignedtocomplywithEC Council Directive 92/58/EEC• Allsignswhiteletteringonblue background• Suppliedwithwoodscrews or self adhesive pads for alternative fixing method • DuallanguagesignsinWelsh and English are also available• Allsignsavailableinthefollowing finish and fixing combinations:

Aluminium - screw fixed Aluminium - self adhesive Vinyl - self adhesive Plastic - screw fixed Plastic - self adhesive

Safety & Security Signs

24 www.laidlaw.net

60 345.1

60 030 60 031 60 032

60 033 60 034 60 035

60 036

60 037

60 038 60 039 60 040

60 041

60 042 60 043 60 044 60 045 60 047 60 048

! !

! !

60 345.1 - 200mm x 150mm 60 346.1 - 200mm x 150mm

60 345.2 - 400mm x 300mm 60 346.2 - 400mm x 300mm

SizesSigns 60 030 to 60 048 are 80mm x 80mm.Signs 60 345.2 & 60 346.2 are 400mm x 300mm.Signs 60 345.1 & 60 346.1 are 200mm x 150mm.

Othersizesavailabletoorderalongwithnon-standardsigns. Please contact your Laidlaw Technical Consultant for further details.

60 036

60 031

Please NoteThe signs shown on this page are for identification purposes only. They are not shown to scale, please refer to the dimensions shown.

www.laidlaw.netORBIS COMMERCIAL - DOOR STOPS & HOLDERS

25 www.laidlaw.net

ProjectionItem no.

32 800.1 75mm

32 800.2 95mm

Skirting buffer

Designed to fix onto the wall, skirting or floor to limit the opening of the door and to protect door hardware from damage

• Skirtingmountedoptions• Rosefixedskirtingoption• Wallorfloormounted• Rangeofprojectionstosuit different hardware

Door Stops & Skirting BuffersSS7PS7 Unit

singleSA7

Finishes

•single•

••

ProjectionItem no.

32 801.1 75mm

32 801.2 95mm

Concealed rose fixedSS7PS7 Unit

singleSA7

Finishes

•single•

••

ProjectionItem no.

32 811 40mm

Wall or floor mountedSS7PS7 Unit

singleSA7

Finishes

•

Designed for floor mounting in timber or solid substrates. The dual purpose door stop & holder will act as a door stop and can be pushed down to act as a door holder.

• Dualpurposestop/holder• Highresistancetodeforming under heavy usage• Lockableversionscanbeheldin the retracted position • Availablewithroundorsquare face plate• Grade316stainlesssteel• 100,000cycletested• Installationkitincluded

Door Stops & Door Holder

Face PlateItem no.

32 840 round - 45mm

32 835 square - 45mm

LockableSS7PS7 Unit

singleSA7

Finishes

single••

Face plateItem no.

32 850 round - 45mm

32 845 square - 45mm

Non-lockableSS7PS7 Unit

singleSA7

Finishes

single••

4552

25Ø

20

25Ø

2.5

45Ø

5220 2.

5

32 801.1 32 800.1 32 800.2

32 85032 845

32 840

32 835

Specification adviceDoor holders must not be used on fire door applications.

ProjectionItem no.

32 802 24.5mm

32 803 40.5mm

Floor mountedSSPS Unit

singleSA

Finishes

single••

19Ø 75 / 9552Ø 75 / 95 52Ø 29

32 800.1 & 32 800.2 32 801.1 32 811

32 80332 802

35Ø

29Ø

45Ø

24.5

40.5

www.laidlaw.netORBIS COMMERCIAL - PULLS, HOOKS & WC FITTINGS

Size (mm)Item no.

61 800 100 x 50

Flush pull SS7PS7 Unit

singleSA7

Finishes

•• Suppliedwithself-tapping screws for surface fixing• Flushpullsuitablefordoors 20mm thick minimum• Availableinallfinishes

Flush Pulls

FunctionItem no.

62 800.0 blank

Cylinder pulls SS7PS7 Unit

singleSA7

Finishes

•

•

•62 800.1 lever key locks single••62 800.2 oval profile cylinder single••62 800.3 euro profile cylinder single••62 800.8 round (rim) cylinder single••

100

50

45

83

FunctionItem no.

81 801 hat & coat hook

Hooks SS7PS7 Unit

singleSA7

Finishes

••81 802 buffered hat/coat hook single••81 803 robe hook single••

A compact series of hooks and wc fittings. Additional items may also be available from the Orbis Premier Series of hardware.

Hooks & WC Fittings

Size (mm)Item no.

89 003 62 x 40 x 10

Indicator bolt

UnitsingleSCP

Finishes

Size (mm)Item no.

80 802 149 x 74 x 31

WC roll holder SS7PS7 Unit

singleSA7

Finishes

•

26 www.laidlaw.net

A series of face fixed cylinder pulls suitable for use with rim nightlatches and mortice nightlatches.

• Suppliedwithself-tapping screws for surface fixing• Alllockingandcylindertypes included

Cylinder Pulls 62 800.0 62 800.1 62 800.2

62 800.3 62 800.8

81 80181 80281 804

81 804 buffered robe hook single••

81 803

80 802 130 x 72 x 28 single•

89 003

80 802

61 800

89 901 75 x 52 singleSS7/PS7/SA7

89 901

www.laidlaw.netORBIS COMMERCIAL - FLUSH & SLIDE BOLTS

LengthItem no.

34 005.1 150mm

34 005.2 200mm

Square ended boltsSS7PS7 Unit

singleSA7

Finishes

•single•

••

34 005.3 300mm single••

A series of lever action flush bolts, primarily intended for mounting in the leading edge or inside face of the normally closed leaf of a pair of doors or a leaf and a half.

• Smoothleveraction• Rangeoflengthstosuitdifferent door heights • 13mmdiametershoot• Radiusendandsquareend variants

Flush Bolts

LengthItem no.

34 007.1 150mm

34 007.2 200mm

Radius ended boltsESSEPS Unit

singleSA7

Finishes

•single•

••

34 007.3 300mm single••

LengthItem no.

34 006.1 152mm

34 006.2 229mm

Knob slide boltsPCPSCP Unit

singleSA

Finishes

•single•

••

34 006.3 305mm single••

A series of sliding knob flush bolts designed for mounting on the inside face of the normally closed leaf of a pair of doors or a leaf and a half.

• Smoothslideaction• Rangeoflengthstosuitdifferent door heights • 11mmdiametershoot

Flush Bolts - Knob Slide

LengthItem no.

34 010.1 150mm

34 010.2 200mm

Surface bolt - straightSS7PS7 Unit

singleSA

Finishes

•single•

34 010.3 250mm single•

A series of surface mounted bolts in straight and cranked formats.

• Rangeoflengthstosuitdifferent door heights • 10mmdiametershoot• Allbolts35mmwide• Suppliedwithself-tapping screws

Surface Bolts

LengthItem no.

34 011.1 100mm

34 011.2 150mm

Surface bolt - crankedESSEPS Unit

singleSA

Finishes

•single•

Sockets for flush bolts. Floor mounted, suitable for 13mm diameter shoots only.

• Easycleanvariant• Sprungloadeddustexcluding variant• Suitablefortimberorconcrete floor substrates• Suits13mmdiametershoot

Bolt Sockets

TypeItem no.

34 028 easy clean

34 029.2

34 029.4

dust excluding

dust excluding

Floor sockets

SCP Unitsingle

Finishes

single

single

•••

27 www.laidlaw.net

SA

34 005.3

34 005.2

34 007.2

34 005.1

34 006.2

34 010.2

34 010.1

34 011.2

34 02834 029.4

Square end SS and PS finish flush bolts are made from 18mm wide section. All radius end and SA square end flush bolts are made from 20mm wide section.

Note: 34 029.2 has a rectangular face plate

28 www.laidlaw.net

ORBIS COMMERCIAL - PANIC EXIT HARDWARE

A final exit door must be fitted with a securing device which enables the occupants of a building to open it without the use of a key from the escape side.

www.laidlaw.net

www.laidlaw.net

29 www.laidlaw.net


Security Designed to provide immediate escape at any time these devices also provide a high level of security from intruders from the outside. The anti-thrust device prevents unauthorised retraction of the latchbolts and the modular design allows various levels of multi-point locking.

Every new build or replacement panic exit application is required to comply with European safety legislation. The European standard BS EN 1125 covers panic exit devices for buildings used by the public providing "safe and effective escape through the doorway with minimum effort and without prior knowledge of operation".

Orbis Commercial panic exit hardware carries the CE mark visibly showing that the products have been independantly tested and assessed to the very latest European standard.

From April 2003 it became mandatory for all manufacturers to CE mark exit devices for fire and escape door use. Orbis Commercial panic exit hardware conforms to BS EN 1125 and carries the CE mark under certificate of conformity number 0099-CPB-A44.

Modular components The Orbis Commercial series offers increased levels of flexibility with its modular design feature. For example, should the need arise for increased security, upgrading a device is simple. The one point locking device can be easily upgraded to two, three or even four point locking on a single door for maximum security. In the same way, double door applications can be increased from three point locking up to six point locking.

Themodulardesignfeaturemeansthatthere’snoneedto replace the whole device when upgrading, simply select the locking kit you require.

The modular components can be applied to the 'Pushbar' or 'Touchbar' operating unit.

A modular system of panic exit hardware which is operated by a horizontal'Pushbar'design.The device can be cut on site and is suitable for doors up to 1300mm wide.

Pushbar Devices

A modular system of panic exit hardware which is operated by a horizontal'Touchbar'design.Two lengths of device are produced, and can be cut on site to fit doors up to 940mm or 1300mm wide.The visual simplicity and low projection of the 'Touchbar' device makes it ideal for any building where aesthetics are an important consideration.

Touchbar Devices

Orbis Commercial Panic Exit Hardware

• Suitableformosttimber,steel,andaluminiumdoorconstructionsuptoamaximummassof200kg,amaximumheightof 2500mm and a maximum width of 1300mm

• Thedeviceissuitablefordoorswithaminimumclearopeningwidthdownto500mm.Thiscanbereducedto350mmwhen the side latchbolts are not required

• Anti-thrustdevice–preventsunauthorisedretractionofthelatchbolt

• Stainlesssteellatchboltsasstandard

• Suppliedcompletewithadjustablestrikersandspacersforaccurateinstallationonbothsingleanddoubledoorapplications.

• 5yearguarantee

www.laidlaw.netORBIS COMMERCIAL - PANIC EXIT HARDWARE

The Modular Approach

See application guides on pages 34 and 36 for details

1.Firstly select which device you wish to use, either a Panic Pushbar or a Panic Touchbar

Finish:Silver/Coloured/Metallic (see p39)

Specification adviceRemember to select the correct length of Touchbar unit to suit the door width (see page 36).

59 861 One point Panic Pushbar Device 59 871.1 & 59 871.2 One point Panic Touchbar Device

2.Choose the most suitable modular locking point configuration. For increased security there is the option of an additional modular locking point.

Finish:Silver/Matt black

59 881 Upper & Lower Pullmans Kit

3.Select the rod kit to connect the locking units to the panic device.

Finish:Silver/Matt black

59 882 Two Side Pullmans Kit

59 883LH & 59 883RH Upper & Side Pullmans Kit

59 884LH & 59 884RH Additional Side Pullmans Kit

59 885 Upper & Lower Rod Kit

Controlled Access Outside access device for use with both Orbis Commercial Pushbar and Touchbar devices.Using an Orbis outside locking device will give access from the outside for key holders when the door is locked. When unlocked the door can also be operated from the outside by using lever/knob. Choice of interchangeable knob, or lever (available separately) allowing the most appropriate method of operation to be selected for the building users. • Suppliedwitheuro-profilecylinderasstandard.Cylinders

can be keyed alike or master-keyed

• Suitablefordoorthickness40mm-70mm

• Fixingssuppliedaresuitablefortimberandmetaldoorsets

• Testedto200,000cycles

• Powdercoatedforadditionaldurability-choiceofsilver, mattblack,gold,brownbronzeorNormbaufinishes

• Choiceofplatedfinishes-satinstainlesssteelandpolished brass

For all other forms of access control (digital, electronic etc) please contact your local Laidlaw Technical Consultant.

36 413.LE & 36 413.KE - Outside Access Devices

Rod extension kits are suitable for use with both Orbis Commercial panic devices on doors in areas that require the pushbar or touchbar to be in a lower position ie schools. These can also be used on doors up to 3350mm high, however doors over 2500mm high are outside the scope of BS EN 1125.

Finish: silver/matt black

59 889 - Top Rod Extension Kit

30 www.laidlaw.net

Clockwise closing

Left handISO. 5.0


Right handISO. 6.0

145

6481

www.laidlaw.net

Pushbar range

Three point locking panic device with two side pullmans

• Suitable for use on single doors

and the first opening leaf of rebated double doors

• Upgradeable to four point locking on single doors and first opening leaf of rebated double doors with Modular Locking Points (see page 34 for details)

• Non-handed–suitableforbothleft and right handed doors

• Dogging device (hold-open) option available (see page 35 for details)

• Alarm micro-switch option available (see page 35 for details)

• Conforms to BS EN 1125

Classification 37611422A

A single point locking panic device

•Suitableforuseonsingledoorsand the first opening leaf of rebated double doors

•Upgradeabletotwo/threepointlocking or four point locking on single and first opening leaf of rebated double doors with Modular Locking Points (see page 34 for details)

•Non-handed–suitableforbothleftand right handed doors

•Doggingdevice(hold-open)optionavailable (see page 35 for details)

•Alarmmicro-switchoptionavailable (see page 35 for details)

•ConformstoBSEN1125 Classification 37611422A

Two/Three point locking panic device with upper and lower pullmans

• Suitable for use on single doors, rebated and non-rebated double doors

• Upgradeable to four point locking on single doors with Modular Locking Points (see page 34 for details)

• Non-handed–suitableforbothleftand right handed doors

• Doggingdevice(hold-open)option available (see page 35 for details)• Alarm micro-switch option available (see page 35 for details)

• Alternative bottom striker option available (see page 39 for details)



Three point locking panic device with one upper and one side pullman

• Suitable for use on single doors• Upgradeable to four point locking

on single doors with Modular Locking Points (see page 34 for details)

• Handed–562-VS/Lsuitableforleft handed doors & 562-VS/R suitable for right handed doors





59 861 - Single point locking 59 862 - Two/Three point locking 59 863 - Three point locking 59 864 - Three point locking


Clockwise closing

Left handISO. 5.0


Right handISO. 6.0

31 www.laidlaw.net

www.laidlaw.net

Orbis Commercial panic exit devices are suitable for application to single doors and in combinations on rebated and non-rebated double doors.

Specification adviceConsideration should be given to the use of door co-ordinating devices for rebated pairs of doors. A door co-ordinating device must be used for fire/smoke applications.

★ Side latchbolt can be disabled during installation

Application guide - Pushbar range

One point locking Three point locking Three point locking Two or Three point locking

59 861 59 863 59 864 59 862

Three point locking Five point locking

59 861 59 862 59 863 59 862

Four point locking

59 862 59 862

108

43145

50

161300

1200

41

96

115

115

115

54 77

16

77

1514

57

3657

363657

10 15

Single Doors

Rebated Double Doors Rebated Double Doors Non-Rebated Double Doors


32 www.laidlaw.net

www.laidlaw.net

Three point locking panic device with two side pullmans

• Suitable for use on single doors

and the first opening leaf of rebated double doors

• Upgradeable to four point locking on single doors and first opening leaf of rebated double doors with Modular Locking Points (see page 34 for details)

• Non-handed–suitableforbothleft and right handed doors





A single point locking panic device

•Suitableforuseonsingledoorsand the first opening leaf of rebated double doors

•Upgradeabletotwo/threepointlocking or four point locking on single and first opening leaf of rebated double doors with Modular Locking Points (see page 34 for details)

•Non-handed–suitableforbothleftand right handed doors

•Doggingdevice(hold-open)optionavailable (see page 35 for details)

•Alarmmicro-switchoptionavailable (see page 35 for details)

•ConformstoBSEN1125 Classification 37611422A

Two or Three point locking panic device with upper and lower pullmans

• Suitable for use on single doors, rebated and non-rebated double doors

• Upgradeable to four point locking on single doors with Modular Locking Points (see page 34 for details)

• Non-handed–suitableforbothleftand right handed doors

• Doggingdevice(hold-open)option available (see page 35 for details)• Alarm micro-switch option available (see page 35 for details)

• Alternative bottom striker option available (see page 35 for details)



Three point locking panic device with one upper and one side pullman

• Suitable for use on single doors• Upgradeable to four point locking

on single doors with Modular Locking Points (see page 34 for details)

• Handed–59874.1LH&59 874.2LH suitable for left handed doors & 59 874.1RH & 59 874.2RH suitable for right handed doors





59 871.1 (1200mm) 59 871.2 (840mm)

Single point locking

59 872.1 (1200mm) 59 872.2 (840mm)

Two/Three point locking

59 873.1 (1200mm) 59 873.2 (840mm)

Three point locking

59 874.1 (1200mm) 59 874.2 (840mm)

Three point locking

Touchbar range


Clockwise closing

Left handISO. 5.0


Right handISO. 6.0

33 www.laidlaw.net

www.laidlaw.net

Orbis Commercial panic exit devices are suitable for application to single doors and in combinations on rebated and non-rebated double doors.

Specification adviceConsideration should be given to the use of door co-ordinating devices for rebated pairs of doors. A door co-ordinating device must be used for fire/smoke applications.

KEY TO DIAGRAMS

★ Side latchbolt not required - disable during installation

L = 1200mm (.1) = 840mm (.2) Codes shown relate to modular products.

Application guide - Touchbar range

One point locking Three point locking Three point locking Two or Three point locking

59 871.159 871.2

59 873.159 873.2

59 874.159 874.2

59 872.159 872.2

Three point locking Five point locking

59 871.1 59 872.159 871.2 59 872.2

59 873.1 59 872.159 873.2 59 872.2

Four point locking

59 872.1 59 872.159 872.2 59 872.2

894330145

50

115

115

115

54 77

2456

39

16L

32

16

77

1514

57

3657

363657

10 15

25

64

Single Doors

Rebated Double Doors Rebated Double Doors Non-Rebated Double Doors


34 www.laidlaw.net

★ Side latchbolt can be disabled during installation


Alarm Switch Kits These units allow standard models to be connected to electronic audio/visual alarm or door control systems giving immediate notification of use when the panic device is operated.The door cannot be opened without the system being activated.

Dogging Device (hold open) Kits These units allow standard models to be upgraded to permit free access when required.The manual hold open function is operated by a key and holds all latchbolts in the withdrawn position.Note: Dogging kits should not be used on fire/smoke applications.

Accessories & Finishes

Accessories for Pushbar Devices only Accessories for Touchbar Devices only

59 866 Alarm Switch 59 867 Dogging Device

59 876 Alarm Switch

59 877 Dogging Device

Metallic Finishes

Note:S - Special Colours may be subject to a longer delivery time.

Due to the limitation of the printing process, we suggest you check your final choice of finish against the actual products or a sample swatch

Powder Coated Metallic Finishes

35 www.laidlaw.net

satin stainless steel (SS)

polished stainless steel (PS)

polished brass(PB)

silver (SE)

gold (GE)

brownbronze(BE)

white 19NWH

manhattan 67NMG

dark grey 18NDG

black 16NBL

yellow 22NYE

green 13NGR

red 12NRE

slate blue 63NSB

dark red 35NDR

ivory 65NIV

blue 11NBU

dark blue 37NDB

RAL-DS 000 95 00 RAL-DS 080 70 05 RAL-DS 000 35 00 RAL-DS 000 15 00

RAL-DS 160 30 38 RAL-DS 030 30 45 RAL-DS 240 50 15 RAL-DS 010 20 25 RAL-DS 090 85 10

RAL-DS 270 30 40 RAL-DS 270 20 25

RAL-DS 080 80 90

Finish of Components (see key)

Option A1. Pushbar/Touchbar - Silver2. Casing covers - Silver3. Pullman covers - Silver4. Rods - Silver

Option B 1. Pushbar/Touchbar - Choose

from powder coated swatches 2. Casing covers - Matt Black3. Pullman covers - Matt Black4. Rods - Matt Black

Option C 1. Pushbar/Touchbar - Choose

from Metallic swatches 2. Casing covers - Matt Black3. Pullman covers - Matt Black4. Rods - Matt Black

Option A (SES) Colour coded powder coated Silver

Option B Coloured powder coated

Option C Simulated metallic finishes

Powder Coated Coloured Finishes

SS


36 www.laidlaw.net

ConstructionPushbar Device The main and end casings are constructed of steel components, mountedonasteelchassisandcoveredbyaprecisionzincdie-castcover.The stainless steel latchbolt is activated by a tubular steel bar.Touchbar Device The main casing & rear bracket are constructed of steel components mountedonasteelchassisandarecoveredbyaprecisionzincdiecast cover.The stainless steel latchbolt is activated by an extruded aluminium touchbar enclosed in an extruded aluminium channel.Locking Kits The locking points are constructed of steel components mounted on a steel chassis incorporating a stainless steel latchbolt. Connection to the pushbar or touchbar device is via steel all thread bars and are concealed by an extruded aluminium cover.

MaintenancePanic exit hardware plays a vital role in the buildings escape route, and it is important that these devices are inspected and maintained properly to ensure safety at all times.As recommended in EN 1125 the following routine maintenance checks should be undertaken at intervals of not more than 1 month by the occupier or his approved representative:- Inspect and operate the panic exit device to ensure all components

are in satisfactory working condition- Ensure that strikers are free from obstruction

Fire/SmokeReference the Fire Precautions Act 1971, always consult the Local Fire Officer for their interpretation of the Act before finalising specification. Products within the Orbis Commercial series have been included in successful fire tests to EN 1634.

Technical Data

Fixing/InstallationThese surface mounted devices come complete with step by step fixing instructions and fixing templates to ensure an easy and accurate installation.Thepushbar,touchbarandrodkitsareeasilycuttosizeon site, to suit doors up to 2500mm high by 1300mm wide.The devices are supplied with non-standard tools for convenience, and adjustable strikers with packers to ensure continued optimum performance.Fixing and maintenance instructions must be passed on to the user upon completion of installation.

Technical SupportIf you have any queries regarding Orbis Commercial exit devices and product selection please call your local Laidlaw Technical Consultant who will be pleased to offer assistance on any aspect of specification including queries on:- Product selection - Advice on installation - Trouble shooting - Ancillary products and spare parts.

Special ApplicationsFor special applications outside those mentioned in this catalogue please contact Technical Support who will be able to advise and assist with product selection for non-standard installations.

Supply & QuotationsThe Orbis Commercial range of panic exit hardware is available through a nationwide network of Laidlaw branches. Other products to EN 1125 include Orbis 7 panic and emergency exit hardware. Please contact your Laidlaw Technical Consultant for further details.

59 861

www.laidlaw.net

1

75020

Power size

max. door sizewidth mmweight kg

STANDARDS & BS EN CLASSIFICATIONS

The standards compliance of Orbis Commercial products falls into 3 categories

• PerformancetestingtothelatestEuropeanstandards,includingCEmarkingwherethisisappropriate• Suitabilityforfire&smokedoorswithproductssuccessfullyincludedontimberandsteeldoorfiretests• CompliancewiththerequirementsofApprovedDocumentMofTheBuildingRegulationsandBS8300,andthereby considered suitable for use in DDA applications

BS EN Standards are the benchmark for product performance in several major product areas within architectural hardware. Each standard prescribes a set of test procedures for products which are selected at random from stock production items. The test data and product evaluation produces a multi digit classification code which runs in parallel across each product area (or as close as practically possible).The relevant BS EN standards are summarised opposite. Further details of these BS EN standards are available from The Association of Builders Hardware Manufacturers at www.abhm.org.uk

CE Marking is applicable only to those products where the BS EN Standard has been harmonised under the Construction Products Directive.

BS EN 1906 is the European standard for 'Lever handles & knob furniture' and is applicable only to items which are used to operate locks or latches.Testing and evaluation results in an 8 digit code.

Digit 1- Category of Use (Grades 1 to 4)Grade 3 is high frequency use by the public with a high chance of misuse.

Digit 2 - Durability (Grade 6 or 7)Testing to 100,000 (Grade 6) or 200,000 cycles (Grade 7)

Digit 3 - Door Mass (No requirement)

Digit 4 - Fire Resistance (Grade 0 or 1)Grade 0 is not suitable for fire door applications

Digit 5 - Safety (Grade 0 or 1)

Digit 6 - Corrosion Resistance (Grade 0 to 4)Grade 3 is the minimum for external applications

Digit 7 - Security (Grade 0 to 4)

Digit 8 - Type of Operation (Type A, B or U)Type U is unsprung lever furniture

31-4

76-7

--

10-1

00-1

30-4

20-4

UABU

Example Orbis 54 801.19FRS lever classification 47-1140U

BS EN 12209 is the European standard for 'Mechanically Operated Locks and Latches'. The standard is wide ranging and covers physical testing of the lock and also classifies it according to the method of operation. Testing and evaluation results in an 11 digit code. BS EN 12209 is harmonised under the Construction Products Directive and CE marking of approved products is permitted.

Digit 1- Category of Use (Grades 1 to 3)Grade 3 is high frequency use by the public with a high chance of misuse.

Digit 2 - Durability (Grades A-C, F-H, L M R S W & X)A complex range of 12 grades based on a combination of side load and test cycles

Digit 3 - Door Mass (Grades 1 to 9)A complex grading system based on a combination of door mass and maximum closing force required


Digit 5 - Safety (Grade 0 or 1)

Digit 6 - Corrosion Resistance (Grade 0 & A-G)

Digit 7 - Security (Grade 1 to 7)

Digit 8 - Field of Door Application (Type A to R)

Digit 9 - Type of Key Operation (Grade 0 & A to H)

Digit 10 - Type of Spindle Operation (Grade 0 to 4)

Digit 11 - Key Identification (Grade 0 & A to H)

31-3

XA-X

81-9

10-1

00-1

F0-G

21-7

BABU

Example Orbis 11 861 Lockcase classification 3H810F3BC20

A0-H

20-4

00-H

BS EN 1154 is the European standard for 'Controlled Door Closing Devices'. The standard measures mechanical door closer performance resulting in a 6 digit classification.

BS EN 1155 is a parallel standard for 'Electrically Powered Hold-open Devices' and is therefore relevant to Electromagnetic door closers. Such closers must satisfy the requirements of both standards, BS EN 1154 and BS EN 1155.BS EN 1154 and BS EN 1155 are both harmonised standards and CE marking became mandatory in 2004

Digit 1- Category of Use (Grades 3 to 4) (Grade 3)Defines the angle from which it will close the door

Digit 2 - Durability (Grade 8 only) (Grades 5 to 8)Grade 8 describes 500,000 test cycles for both standards but is the only grade available in BS EN 1154

Digit 3 - Door Mass (Grades 1 to 7) (Grades 3 to 7)Identifies the closing power of the closer by max. door width and weight (see chart below)

43-4

88

31-7

11

11

40-4

Example Orbis 31 803 Smoothline closer classification 483113

33

85-8

33-7

11

11

40-4

BS EN 1154 classification

BS EN 1155 classification

Digit 4 - Fire Resistance (Grade 0 or 1) (Grade 1)Grade 0 is not suitable for fire door applications. Grade 1 must be supported by fire tests to BS EN 1634

Digit 5 - Safety (Grade 1only)Grade 1 identifies the closer is hazard free

Digit 6 - Corrosion Resistance (Grade 0 to 4)

2

85040

3

95060

4

110080

5

1250100

6

1400120

7

1600160

37 www.laidlaw.net

www.laidlaw.netSTANDARDS & BS EN CLASSIFICATIONS

BS EN 1125 & BS EN 179 Products which are designed to provide safe and effective escape from a building in an emergency situation are covered by two European standards which have clearly defined applications.

BS EN 1125 is the European standard for 'Panic Exit Devices'. The primary determining factor is that a 'Panic' device must be fitted where members of the public are present and have no prior knowledge of the exit or the hardware.

BS EN 179 is the standard covering 'Emergency Exit Devices'.In 'Emergency' situations it is assumed the occupants will have prior knowledge of the exit and a panic situation is unlikely to occur. Testing and evaluation to each standard results in a 9 digit code. BS EN 1125 and BS EN 179 are harmonised under the Construction Products Directive and products must therefore carry the CE mark.

Digit 1- Category of Use (Grades 3)Grade 3 is high frequency use by the public with a high chance of misuse.

Digit 2 - Durability (Grades 6 or 7)Cycle testing, Grade 7 having undergone 200,000 cycles

Digit 3 - Door Mass (Grades 5 or 6)Determined only by door mass of 100g or 200kg


Digit 5 - Safety (Grade 1 only)All panic and emergency exit devices have a critical safety function

Digit 6 - Corrosion Resistance (Grade 3 or 4)

Digit 7 - Security (Grade 2 only) (Grade 2 - 4 in BS EN 179)

Digit 8 - Projection of Device (Grade 1 or 2)Grade 2 is low projection, less than 100mm

Digit 9 - Type of Device (Type A or B)BS EN 1125 - Type A is a pushbar operationBS EN 1125 - Type B is touchbar operation

BS EN 1125 - Type A is with lever handle operationBS EN 1125 - Type B is with push pad operation

33

76-7

65-6

10-1

11

43-4

22

21-2

Example Orbis 59 871 Panic Device classification 37611422B

AA-B

Fire TestingIndividual products are not in themselves fire tested, but are included as an integral part of a fire test carried out on a timber or steel fire door. As a consequence, the details of the test, the construction of the door, the inclusion of intumescent material etc must be considered when specifying products suitable for use on a fire door. Where Laidlaw products are indicated as suitable for fire door applications, the products have been successfully included on the test door which has achieved the stated rating. Laidlaw holds comprehensive test certification for all appropriate products and these are available on request.

BS EN 1935 is the European standard for 'Single Axis Hinges' used on doors and windows. Testing and evaluation of the product results in a 8 digit code.

BS EN 1935 is harmonised under the Construction Products Directive and products must therefore carry the CE mark.

Digit 1- Category of Use (Grades 1 to 4)Grade 3 is heavy duty use.

Digit 2 - Durability (Grades 3, 4 or 7)Cycle testing, Grade 7 having undergone 200,000 cycles

Digit 3 - Door Mass (Grades 0 to 7)Table of door mass from 10kg up to 160kg


Digit 5 - Safety (Grade 1 only)All hinges have a critical safety function

Digit 6 - Corrosion Resistance (Grades 0 to 4)Grade 3 is high resistance

Digit 7 - Security (Grade 0 or 1)Grade 0 is not suitable for burglar resistance

Digit 8 - Hinge Grade (Grades 1 to 14)Grading is by combination of test cycles and door mass. Grade 13 is 200,00 cycles of a door mass of up to 120kg

31-4

73-4-7

60-7

10-1

11

30-4

00-1

131-14

Example Orbis 37 801.1 hinge classification 37611422A

38 www.laidlaw.net

www.laidlaw.netDDA, APPROVED DOC. M & BS 8300

The details on this page are a simple summary of the primary sources of information related to the use of hardware products in order to satisfy disabled access.

The Disability Discrimination Act/Equality Act 2010It is important to remember that the Equality Act (which incorporates the previous Disability Discrimination Act) is civil rights legislation and does not set out specific requirements or guidance in the design of buildings. As such it is therefore not appropriate to attach any notion of conformity to products, such as "DDA compliant" or "Conforms to DDA requirements". The legislation came into force on 1st October 2004.Any new building or alterations to existing buildings, in order to satisfy obligations under the DDA, must comply (in England & Wales) with The Building Regulations, and in particular, the 2004 edition of Approved Document M (ADM) which became effective in May 2004.Where certain issues are not covered in ADM, further reference will be made to BS 8300.

Further detailed information can be obtained from the following:

Office of the Deputy Prime Ministerwww.odpm.gov.uk

Association of Buildiers Hardware Manufacturerswww.abhm.org.uk

BSI Customer [email protected]

Office of Public Sector Informationwww.uk-legislation.hmso.gov.uk

Disability Rights Commissionwww.drc-gb.org

Guild of Architectural Ironmongerswww.gai.org.uk

The implementation of legislation in 1996 made it a legal duty on those responsible for buildings used by the general public, and employers responsible for places of work, to ensure that the building and its facilities are accessible to disabled people. The aim of The Disability Discrimination Act (DDA) is to make it a duty to avoid discrimination againsts disabled people and this duty requires that Service Providers make "reasonable" adjustments to the design of the building in order to provide this universal level of access.

Approved Document M (ADM)The main requirements set out in ADM are, as with all parts of The Building Regulations, performance based and the guidelines set out in the document are recognised as one way of achieving the requirements. The scope of the requirements are clearly set out, requiring that provision is made for people to "a) gain access to and b) use the building and its facilities". This includes the provision of sanitary accomodation in domestic and non-domestic buildings.ADM applies not only to new building but also to alterations and extension of existing buildings. Where certain issues are not covered within ADM, further reference will be made to BS 8300.

ADM contains a number of very specific requirements for the following aspects related to architectural hardware specification.

Accessible DoorsADM recognises that negotiating entrance doors can be difficult for the general public, not just disabled people: parents with children, those carrying luggage or with pushchairs etc. It is stated within ADM that doors which are required to be self closing must require a force no greater than 20N at the leading edge in order to open them. In most practical applications "A powered door opening and closing system .... is the most satisfactory solution for most people" (ADM 2.10).Althoughthe20Newtons‘rule’technicallystillexistsithasbeengenerally superceded by a two-phase criteria established within BS 8300 in 2005. This states a maximum opening force of 30N at the initial opening stage (0˚ to 30˚), reducing to 22.5N from 30˚ to 60˚ opening angle.

Fire & Smoke DoorsBS EN 1154 requires fire doors to be held closed by a door closer withaminimumpowersize3.Thisrequiresaforceinexcessof20N(see chart below) and therefore puts it into conflict with the 20N opening force requirement of ADM. In these circumstances ADM recommends the use of electromagnetic hold open or low energy door operators. For fire doors within corridors the preference is for electromagnetic hold open units. Where privacy is still a requirement, such as doors to individual rooms, an electromagnetic device which offers a 'swing free' facility is preferable.

BS 8300:2001This standard provides guidance on good practice in the design of buildings to make them suitable for use by disabled people. The standard is often used as a supplement to ADM and includes more specific dimensionalguidance,particularlyregardingthesizesof door operating hardware.

BS 8300 contains the following recommendations related to architectural hardware specification.

Accessible DoorsAsidefromthe‘headline’figuresofADM,theguidancein BS 8300 points clearly to the use of powered solutions including low energy operators to achieve the level of accessibility required on external doors (including recommendations for the positioning of any manual controls.

Fire & Smoke DoorsDoors to escape stairs and final exit doors are not specifically covered in ADM. In BS 8300 it is considered suitable to use a conventional door closer in these cases, as such doors are likely to be opening in the direction of escape (ie push to exit). In these situations BS 8300 recommends a maximum opening force of 30N.

Internal DoorsFor internal doors which need to be self closing for privacy or environmental reasons, they must meet the maximum opening force criteria of 20N. In these circumstances a high efficiency variable powerdoorcontrolisrequired.Whensettotheloweststrength(size1) to reduce the opening force it may cause problems in latching the door, especially in locations which may be susceptible to drafts or air pressure differences. Locks with a 'soft action latch' and high quality hinges will help in making sure the door latches properly each time.

BS EN 1154 min. closing moment

Min. closing force (moment/door width)

BS EN 1154 min. closer efficiency

Corresponding min. opening force

BS EN 1154 size1

9 Nm

10.59 N

50%

21.18 N

BS EN 1154 size3

18 Nm

21.17 N

55%

38.5 N

Note: calculations are based on a door leaf width of 850mm.

Closing & Opening forcesAs can be seen from the chart opposite, a door closer powersize1withonlytheminimumefficiencyallowedin the EN standard (50%) will not satisfy the maximum opening force to satisfy the 20N limit in ADM. Also clearlyevidentisthefactthatapowersize3closer(themin. allowed in satisfying the requirements for a fire door) has an opening force at the edge of the door beyond the 30N maximum allowed in the revised regulations.Only high efficiency closers will therefore meet the dual requirements for an accessible fire door.

39 www.laidlaw.net

www.laidlaw.net

Approved Document M (ADM)

Door Opening HardwareGuidance on the specification for door hardware falls into 2 main categories

- ability to grip and operate the hardware- ability to visually locate the hardware

Ability to grip and operate the hardwareThe requirement within ADM is that "where fitted with a latch, the door opening furniture can be operated with one hand using a closed fist, e.g. a lever handle" (ADM 2.17).

Whilst no specific dimensional requirements are laid down in ADM, such recommendations are covered in BS 8300.

It is a requirement of ADM that external handles (ie those used to open manual external doors), should not be 'cold to the touch'. Whilst most people will find a bare metal handle unpleasant to grip in the depths of winter, for some, particularly elderly people, it can be quite painful.

DDA, APPROVED DOC. M & BS 8300

BS 8300:2001

Door Opening HardwareBS 8300 is more detailed in its recommendations, prescribing dimensional parameters for locks & latches, lever and pull handle furniture.

Locks & latchesTo improve physical and visual access to the lever and lock keyway, the distance from the edge of the door and between the lever and keyway should be maximised; "..the cylinder should either be above the lever handle, or the minimum distance between the handle and the keyway .. should be 72mm." (BS 8300 - 6.5.3.2)

It also requires a backset of 54mm minimum (from edge of door to the lockcase operating centre - see diagram opposite).

Lever handlesThe principal requirements are that "where possible, door opening furnitue with a lever action should be used .... without tightly grasping it or twisting the wrist e.g by using a closed fist".It also recommends levers return to the door face at the open end to aid the grip and avoid catching clothing. Dimensional characteristics for lever handles are covered by Fig. 17 of BS 8300. See diagram opposite.

Whilst lever handles are the preferred solution, there are circumstances where other issues can take precedence. The requirement to prevent self harm is one such issue where the risk associated with the lever furniture takes precedence over disabled access. Such situations will be covered by the provision of an Access Statement at the planning stage.

Pull handlesRecommendations are included concerning the positioningandsizeofpullhandles

• Minimumdiameter19mm• Projectionfromdoorface45mm• Mountingheightforpullhandlesasshown opposite

Recommendations also include the provision of a horizontalpullhandleondoorsfittedwithalatchtoenable wheelchair users to pull the door closed.See diagram opposite.

Grab railsPart M3 of Approved Document M of The Building Regulations covers the provision of sanitary facilities. Whilst not specifically part of the Orbis Commercial range, we have a full range of grab rails and disabled fittings. Please contact your Laidlaw Technical Consultant for further details.

horizontalpullhandle

min. length 600mm

900

- 11

00m

m10

00 p

refe

rred

1000

mm

1400

mm

kicking plate

400mm

Lock & latch critical dimensions BS 8300

Lever handle dimensions

Pull handle recommendations - BS 8300

72m

m

min

imum

54mm

minimum

'generous length'

45mm minimum

19mmØ

40 www.laidlaw.net

Building Regulations in Scotland & Northern IrelandTechnical Handbooks are published to guide specifiers in Scotland and Northern Ireland in much the same way as ADM but are not as detailed, offering little or no guidance in the specification of door hardware although the amended Technical Booklet (Part R) published in Northern Ireland does contain specific information related to handrailing and sanitary fittings. In most cases the Handbooks for Scotland refer specifiers to the guidance contained in BS 8300.

www.laidlaw.netDDA, APPROVED DOC. M & BS 8300

41 www.laidlaw.net

Approved Document M (ADM) Continued

Colour contrast & light reflectanceFor people with impaired vision the ability to identify key objects in the environment determines their ability to live independantly. It is a requirement of ADM that "all door opening furniture (on manually operated doors) contrasts visually with the surface of the door" (ADM 2.17)."All door furniture should contrast in colour and luminance with the surface of the door ..." (BS 8300 - 6.5.1)

The measure of brightness or luminance is measured by the amount of light which objects reflect (Light Reflectance Value - LRV). Whilst people with impaired vision may not be able to easily identify colour they will generally be able to identify some reflected light. The greater the difference in LRV between the door and the hardware, ie the contrast between the two, the easier the hardware will be to locate. On a basic scale of 1 - 100, where a black object which reflects very little light has a LRV of typically less than 10, it is recommended that the door and hardware should have a contrast equivalent to a LRV difference of at least 15 points.

Metallic finishesThe suitability of metallic finishes is a complex issue due to numerous external factors which affect the percieved LRV of metallic substrates. The level and angle of incident light, the colour and nature of the door surface and the surrounding structure of walls, ceiling and floor will all have a bearing on the amount of light which each item of hardware reflects. It is therefore not possible to state which finishes are good and which are not; each must be judged in context to the surrounding environment.

Recent ResearchThe Research Group for Inclusive Environments was commissioned to undertake specific research in this area in association with the GAI (Guild of Architectural Ironmongers). A small (but nonetheless representative) group of visually impaired people tested actual ironmongery samples against various typical door finishes. Results showed that even at LRV differences of 10, over 72% of the test sample were confident of locating the hardware. It is thought that the 3D nature of the hardware, with its highlights and shadows contributes to the ease of location. Also, the nature of the hardware (gloss or matt) appeared to have no significant bearing on how easy it is to detect (see www.gai.org.uk for further information).

MeasurementsAvailable to specifiers of Laidlaw products is a portable 'Spectrophotometer' which enables LRV readings to be taken of any material, for example door finishes and veneers, to compare with LRV readings of Laidlaw products. Please ask your Laidlaw Technical Consultant for more information.

CPD seminarsLaidlaw can provide a comprehensive series of RIBA approved CPD seminars including presentations covering DDA and Doc M issues. Subjects covered will include all aspects of colour contrast and demonstrations on the use of the 'Spectrophotometer'.

CPD seminar at our Salford branch showing the use of the Spectrophotometer.

www.laidlaw.net

01 802.1 2101 802.2 2101 803.1 2101 803.2 2101 803.3 2101 804.1 2101 805.1 2101 806.1 2101 807.1 2101 808.1 2101 809.1 2101 810 2101 812.1 2101 812.2 2101 813.1 2101 813.2 2101 813.3 2101 822.1 2101 822.2 2101 822.3 2101 823.1 2101 823.2 2101 823.3 2101 832.1 2101 832.2 2101 832.3 2101 833.1 2101 833.2 2101 833.3 2108 850 2108 851 2108 852 2108 853 2108 854 2108 855 2108 856 2108 857 2110 851 2010 862 1911 851 2011 861 1911 863 1912 851 2012 861 1913 007 2113 851 2013 852 2013 861 1913 862 1914 022 2114 023 2125 004 2125 006 2125 008 2127 533 1727 533.1 1727 533FMB 1727 853 1427 854 1427 855 14

27 856 1427 857 1427 858 1427 892.30 1427 893.30 1527 894.30 1529 010 1629 011 1629 012 1629 013 1629 016 1629 017 1630 764 1530 863 1530 864 1530 865 15 30 866 1531 807 1331 808 1331 891 1331 892 1332 800.1 2532 800.2 2532 801.1 2532 801.2 2532 802 2532 803 2532 810.1 1832 811 2532 835 2532 840 2532 845 2532 850 2534 005.1 2734 005.2 2734 005.3 2734 006.1 2734 006.2 2734 006.3 2734 007.1 2734 007.2 2734 007.3 2734 010.1 2734 010.2 2734 010.3 2734 011.1 2734 011.2 2734 028 2734 029.2 2734 029.4 2736 413 3437 800.1 1837 800.2 1837 801.1 1837 801.2 1838 810.1 1837 810.2 1837 879.5 1837 879.6 1850 800.0 8

50 800.3 850 800.3.7 850 800.4 850 800.4.7 850 800.5 850 800.5.7 850 800.6 750 800.15 850 800.15.7 850 800CW 750 853.19.6 1250 853.22.6 1250 900.6 950 901.72 950 902.72 950 911.72 950 912.72 951 800.0 851 800.1 851 800.2 851 800.3 851 800.4 851 800.5 851 800.15 851 900.0 951 900.3 951 900.4 951 900.5 951 900.15 951 901.72 952 801 1252 802 1252 803 1252 804 1252 805 1252 806 1253 819.15 1153 819.18 1153 819.24 1153 819.30 1153 819.45 1153 819.60 1153 822.18 1153 822.24 1153 822.30 1153 822.45 1153 822.60 1153 832.13 1053 832.21 1053 832.28 1053 833.30 1054 800.19 654 800.22 654 801.19 654 801.19FR 654 801.22 654 801.22FR 654 832.22 754 833.22 754 834.22 7

59 861 3159 862 3159 863 3159 864 3159 866 3559 867 3559 871 3359 872 3359 873 3359 874 3359 876 3559 877 3559 881 3059 882 3059 883 3059 884 3059 885 3059 889 3060 001.1 2260 001.2 2260 001.3 2260 001.4 2260 001.7 2260 011.1 2360 012.1 2360 013.1 2360 014.1 2360 014.2 2360 030 2460 031 2460 032 2460 033 2460 034 2460 035 2460 036 2460 037 2460 038 2460 039 2460 040 2460 041 2460 042 2460 043 2460 044 2460 045 2460 047 2460 048 2460 051 2360 052.1 2360 052.2 2360 054 2360 055 2360 056 2360 060 2360 062 2360 063 2360 070 2360 071 2360 072 2360 073 2360 345.1 24

60 345.2 2460 346.1 2460 346.2 2460 411.1 2360 411.2 2360 412.1 2360 412.2 2360 413.1 2360 413.2 2360 414.1 2360 414.2 2360 415.1 2360 415.2 2360 416.1 2360 416.2 2360 417.1 2360 417.2 2360 418.1 2360 418.2 2360 601 2260 602 2260 603 2260 604 2260 605 2260 606 2260 607 2260 608 2260 609 2260 617 2260 618 2260 619 2260 620 2260 621 2260 622 2260 623 2260 624 2261 800 2662 800.0 2662 800.1 2662 800.2 2662 800.3 2662 800.8 2680 802 2681 801 2681 802 2681 803 2681 804 2689 003 26APH.01 13APH.02 13FPP1 12FPP2 12FPP3 12FPP5 12FPP6 12FPP7 12IP H1 18IP H2 18IP L3 19IP L4 19

ORBIS COMMERCIAL - INDEX

42 www.laidlaw.net

Laidlaw is the leading specifier, distributor and technical service provider for architectural ironmongery, doorsets, handrail & balustrading and access control solutions to the construction industry. Laidlaw offers its unique service through a national network of 13 Sales Centres, supported by a centralised distribution centre at Willenhall which has the capacity to pack and despatch individual items or by doorset.

BarnstapleUnit 1, Brannam Crescent

Roundswell Business Park (West)Barnstaple, North Devon

EX31 3TD

T: 01271 311920F: 01271 311929

BristolUnit 4, Marketside Industrial Estate

Albert Road, St. PhilipsBristol BS2 0XS

T: 0117 300 3980F: 0117 980 3058

CardiffUnit A2 Cook Court

Pacific Business ParkCardiff CF24 5AB

T: 029 2047 1808F: 029 2049 0250

GatesheadUnit 1 Halifax Court, Halifax Road

Dunston, GatesheadTyne & Wear NE11 9JT

T: 0191 461 4100F: 0191 461 4101

Glasgow4 Clifford Court

171 Woodville StreetIbrox Business ParkGlasgow G51 2RQ

T: 0141 445 8892F: 0141 445 8871

Kinmel BayUnit 37 Tir Llwyd Industrial Estate

St Asaph AvenueKinmel Bay, Rhyl

North Wales LL18 5JA

T: 01745 332151F: 01745 332493

Laidlaw Gulf LLCPO Box 185292

DubaiUnited Arab Emirates

T: +971 (0) 4885 7404F: +971 (0) 4885 7414

Sales CentreTrade CounterDistribution Centre

Liverpool3 - 5 Century Building

Summers RoadBrunswick Business Park

Liverpool, Merseyside L3 4BL

T: 0151 709 9438F: 0151 709 9455

LondonThe Building Centre

26 Store StreetLondon WC1E 7BT

T: 0207 436 0779F: 0207 436 0740

PerthPO Box 15Arran Road

Perth PH1 3DU

T: 01738 620581F: 01738 633262

SalfordCenturion House

Dakota Avenue, SalfordManchester M50 2PU

T: 0161 848 0101F: 0161 872 9313

SheffieldUnit 17

Riverside CourtDon Road

Sheffield S9 2TJ

T: 0114 243 8916F: 0114 242 6591

WillenhallStrawberry Lane

WillenhallWest Midlands

WV13 3RS

T: 01902 600400F: 01902 600490

YorkSaturn Architectural Solutions Ltd

Unit 9 Harrier CourtAirfield Business Park

Elvington, York YO41 4EA

T:01904 608864F: 01904 607759

© Laidlaw Solutions Limited July 2011/L108/002

accesscontrol


doorsetsolutions


1

2

3

4

While Laidlaw has taken every care to ensure the accuracy of information, data and advice contained in this literature, no liability in respect of such information whether given negligently or not can be accepted by the company. Due to variations in the printing process, actual colours may differ from those shown. Laidlaw retains the right to amend the technical specification of any range of equipment shown.

technical helpline

1 2

4 5

0845 0700 [email protected]

As part of continual efforts to reduce our carbon footprint, this brochure is printed on a FSC® certified paper stock which originates from well-managed forests, controlled sources and recycled wood or fibre as indicated by the logo opposite.

To email a UK sales centre use the following format:

[email protected] (e.g. [email protected])

RS 10508EMS 531228

CONTRACTORS HEALTH &

SA

FETY

A

SSESSMENT SCHEM

E

Chas Accredited

HA

Incorporating DSMA & ABHM

Architectural Ironmongery SolutionsLaidlaw's comprehensive portfolio of architectural ironmongery, featuring the renowned Orbis brand, is designed to meet or exceed the highest levels of aesthetic and performance standards for today's construction industry.

Doorset SolutionsLaidlaw has pioneered the Orbis Doorsets solution which is supplied complete with the door, frame, architraves and factory fitted ironmongery to maximise efficiency and minimise on-site work.

Handrail and Balustrade SolutionsLaidlaw's handrail and balustrade solutions are available in a wide variety of construction and finish options. From site surveys and design through to supply and installation, our fully trained staff offer a comprehensive technical service at all stages.

Access SolutionsFrom simple masterkeyed cylinders up to state-of-the-art biometric access control and automatics, we have the expertise to design and supply an integrated system to suit each specific building and application.

Date post:	12-Jun-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

SfB Orbis Commercial Range - RIBA Product Selector · Within the Orbis Commercial range is a...

Documents