Saving Company
Siberian Heat
– liquid, ultra-thin, heat-insulating material. It consists of microscopic vacuum ceramic microspheres (diameter 0.03-0.08 mm), which are in the liquid composition on the similarity of the paint. After drying form a flexible coating. The layer thickness of 0.5 mm are arranged around 20 layers of vacuum microspheres. They create a thermal barrier and prevent the passage of heat flow.
Heat flow
2
Siberian Heat Saving Company
Thermal insulation efficiency
, applied a layer of 1 mm., similar efficiency 50 mm. polyurethane foam.
3
1 mm – TSM Ceramic
50 mm – Polyurethane foam
50 mm – Mineral wool
Siberian Heat Saving Company
4
Galvanized iron
Ruberoid
Vapor insulation
Mats sewed
Undercoat (2 layers)
Traditional heat insulation
Material operated at temperatures from -60 ° C to + 260 ° C. The temperature of the surface to be coated is from + 5 ° C to + 150 ° C.
The coating has a guarantee of 10 years, and service life of over 30 years
The cost of working with the material less than the cost of conventional solutions
Siberian Heat Saving Company
Material is applied to the surface of any shape with a brush or spray: metal, concrete, brick, wood, plastic, drywall and other.
metal
concrete brick wood
drywall
plastic
5
Siberian Heat Saving Company
6
60-70%
30% 45%
0.6 mm
2 dB
0,03g / cm³
Siberian Heat Saving Company
+5 +150 С˚.
30 years
7
Siberian Heat Saving Company
Walls, floors, ceilings, roofs of residential and industrial
buildings, both from the inside and outside
Metal structures
Hangars and garages
Balconies, loggias
Country houses, cottages
Eliminating the «bridges of cold»
Energy-saving material is widely used for insulation in construction:
8
Siberian Heat Saving Company
Effectiveness of material is proved not only in the harsh Siberian conditions, but also in many other regions of Russia: Yuzhno-Sakhalinsk, 28 residential buildings were completely insulated for 47 days. The cost of insulation is 2 times lower hinged facades and 7 times faster
Yuzhno-Sakhalinsk - thermal insulation of facades, tinting in any color
9
Siberian Heat Saving Company
In the autumn of 2009 in Moscow children's educational institution made the facade insulation
using coating thickness of 1 mm., the thickness of pipeline coating 0.5-2.5 mm.
After applying the material FCM Ceramic reduced coolant flow rate by 55%
The thermal resistance of the wall increased by 30.5% 10
Siberian Heat Saving Company
Krasnoyarsk, insulation of the cottage
is successfully used for thermal insulation of houses and sports facilities.
Krasnoyarsk, insulation of the ice rink from the inside
11
Siberian Heat Saving Company
Krasnoyarsk - warming of the base and a rampant, eliminating «bridges of cold»
BC "Gold"
Krasnoyarsk - insulation of the facade of the Big Concert Hall
, due to its structure allows you to insulate the complex constrained designs that are not insulated by conventional methods
Krasnoyarsk, settlement Pines - warming wood walls
Krasnoyarsk, apartment pr.Svobodny - floor insulation
12
Siberian Heat Saving Company
Lower operating costs during the heating season, by reducing heat loss.
Lower operating costs for air conditioning indoors, by insulating of the roof and walls of the
building.
Reducing direct costs of the construction of buildings and structures due to the possibility of
reducing the thickness of the walls, the size of the foundations.
The possibility of replacing cumbersome insulation systems of facades, walls of buildings by the
material TSM Ceramics.
High service life of the material (at least 30 years).
13
Siberian Heat Saving Company
TSM Ceramic is widely used in heat and power engineering
Pipelines of thermal heating systems Steam lines and gas pipelines Air conditioning systems Pipes with cold water (to avoid condensation) Steam boilers Valving Tanks and reservoirs
14
Siberian Heat Saving Company
Achinsk, "Rosneft" Insulation of the storage tanks of petroleum products
is successfully used for thermal insulation of tanks and gas-holders.
15
Siberian Heat Saving Company
Insulation of water and oil tanks
used for insulating oil and gas pipelines as a ground and underground installation.
16
Siberian Heat Saving Company
Insulation of locomotive cabin
widely used for thermal insulation of carriages and locomotives
17
Siberian Heat Saving Company
Insulating of heating main Insulation of pipelines
Krasnoyarsk, PNS North - insulation of pipelines and equipment
18
Siberian Heat Saving Company
Competitive price of in comparison to commonly used insulation..
Reduced labor costs and time using by simplicity and ease of handling.
Reducing of repair costs due to accidents visibility and easy maintainability.
Reducing of the cost of thermal energy saving in pipes, boilers, etc. due to the high thermal insulation characteristics of the and full insulation of pipes, boilers, etc., even in the most hard to reach places.
The possibility of applying directly the to hot surface (up to 150 C) without stopping current district heating network or boiler.
Reducing of the repair costs of thermal insulation by increasing the warranty period, compared with standard insulation.
No costs for the restoration of the insulation due to lack of the possibility of secondary use (vandal resistance)
19
Siberian Heat Saving Company
TSM Group
Moscow, Sushchevskiy Val Street 16/4 phone: +7-499-301-01-22 e-mail: [email protected]
www.tsm-g.com
20