2
Content1. Introduction...........................................................................................................................3
2. Features.................................................................................................................................3
3. Specification..........................................................................................................................3
4. Packing..................................................................................................................................4
5. Panel......................................................................................................................................4
5.1 Front Panel..........................................................................................................................4
5.2 Back Panel...........................................................................................................................5
6. Input and Output Cards..........................................................................................................5
6.1 Input cards..........................................................................................................................5
6.2 Output cards.......................................................................................................................4
7. Connection Diagram...............................................................................................................6
8. Operations.............................................................................................................................6
8.1 Touch control panel.............................................................................................................6
8.2 WEB control......................................................................................................................13
8.3 3rd Party Control...............................................................................................................16
9. Commen problem Shooting..................................................................................................17
10. After Sales..........................................................................................................................17
10.1 Warranty.........................................................................................................................17
10.2 Limitations.......................................................................................................................17
11. Version Information...........................................................................................................18
1. Introduction
3
Touch manager is an integrated video and audio modular matrix switcher. The superior modular matrix manages any type of signals. This switch supports long haul transmission, maintain power reliability in the event of failure and offer the best flexible solutions for AV system deployment. It supports high-resolution HDMI sources routed to HDMI displays, monitors, projectors, or audio receivers and so on. The EDID can be selected between seven different modes or copied from the attached displays. You can control the switch via front-panel touch screen, web control, or RS-232.
2. Features Seamless switching
Hot-plug, don’t need to wait
EDID management, HDCP compliant
Redundant control and power system
WEB GUI, RS232 and 7 inch touch large screen control
Audio embedded and de-embedded for all inputs and outputs card
Scenes save and recall, change resolution IP and so on functions
Modular designing, 1 card 1 port. Can support DVI/ HDMI/ HDSDI/ 3GSDI/ HDBaseT/ Fiber
CVBS/VGA/YPBPR mixed inputs and outputs
3. SpecificationModel Touch Manager 100 Touch Manager 200 Touch Manager 400
Description 10x10 card cage matrix 20x20card cage matrix 40x40card cage matrix
Modular Design
10 slots for inputs and outputs
20 slots for inputs and outputs
40 slots for inputs and outputs
Input card 1 card 1 port, Support HDMI/ DVI/ 3GSDI/ VGA/ YPBPR/ CVBS/ HDBaseT/ Fiber
Output card 1 card 1 port, Support HDMI/ DVI/ 3GSDI/ VGA/ YPBPR/ CVBS/ HDBaseT/ Fiber
Protocol Support HDMI1.4a and DVI1.0, HDCP compatible and EDID function
Color Space Support RGB444, YUV444, YUV422 and x.v.Color extension
Resolution640×480---1920×1200@60Hz(VESA)480i---1080p60Hz(HDTV)
Bandwidth 12.5Gbps
Transmission Distance
70m(Cat5e/6); 500m(MM Fiber); 2Km(SM Fiber); 25m(DVI/HDMI Cable); 30m(VGA Cable)
Control Dual RS232, dual LAN(WEB GUI), front touch panel
Dimension 482*390*200mm(L/W/H) 482*390*400mm(L/W/H) 482*390*711mm(L/W/H)
Weight 10kg(No cards) 15kg(No cards) 28kg(No cards)
Power 110---260V 50/60Hz
Consumption
38W(No cards) 62W(No cards) 110W(No cards)
4
Working Temperature
0 - 50℃ ℃
Storage Temperature
-20 - 55℃ ℃
Working Humidity
10%-90%
4. Packing
5. Panels5.1 Front Panel
A: Network Indicator: Shows the operations of WEB control, flicking once for every operationsB: Active Indicator: Shows the operations of Touch panel control, flicking once for every operations C: Power Indicator: Light up means power on, flicking means connection problemD: Front Panel: 482*222mmE: 7 inch touch screen
5.2 Back Panel
TouchManager Chassis 1 UnitPower Cord 2 PcsRS232 Cable 2 Pcs
5
A: Back panel: 440*222mmB: 3.5mm Audio inputC: Status indicator: Power on will light upD: DVI-I interface input, support DVI/ HDMI/ CVBS/ Ypbpr/ VGA input with adaptersE: Input area, maximum can support 10/ 20/ 40 inputs, signals can be DVI/ HDMI/ CVBS/ Ypbpr/ VGA/ HDBaseT/ Fiber OpticF: Plug helperG: Input and output indicates flap, left side is 1-10 inputs, right side is 1-10 outputsH: 3.5mm Audio outputJ: DVI-I interface output, support DVI/ HDMI/ CVBS/ Ypbpr/ VGA input with adaptersK: Output area, maximum can support 10/ 20/ 40 inputs, signals can be DVI/ HDMI/ CVBS/ Ypbpr/ VGA/ HDBaseT/ Fiber OpticL & N: Dual RS232 portsM & O: Dual LAN portsP: ON/ OFF power switcherQ: Redundant power system, 100-240V 50/60Hz
6. Input and Output cards
IN
UniversalCard
Supports 1 DVI/HDMI/VGA/YPBPR/CVBS input
Audio embedded
SDI Card Supports 1 3G/HD/SD-SDI input and 1 loop out
Audio embedded
HDBaseTCard
Supports 1 HDBaseT i n p u t70/ 100M, RS232, POC and bidirectional IR
Fiber Optic
Supports one core LC fiber optic input
UniversalCard
Supports 1 DVI/HDMI/VGA/YPBPR/CVBS output
Audio de-embedded
SDI Card Supports 2 3G/HD/SD SDI‐ outputs
Audio de-embedded
6
OUT HDBaseTCard
Supports 1 HDBaseT o u t p u t
70/100M, RS232, POC and bidirectional IR
Fiber Optic
Supports one core LC fiber optic output
7. Connection Diagram
8. Operation8.1 Touch Screen After power on, it shows below interface
Functions’ introduction:
7
Switch Icon:After click switch icon, it shows below interface:
Eg. Switch input 2 to output 4/ 5/6. Press number 2 on the touch panel, and color turns to blue. Then same way to press number 4/5/6 on the output area, shows as above picture. Note: If need to cancel output 4, only need to press the button icon again to change the colors to gray and lase we can see the connection line from input 2 to output 4 is disappear, please see as below:
8
SCENE Icon:Total can save 24 scenes, after press SCENCE it will show below interface:
Save scene: After pressed scene icon, users can see above interface. Then users can choose any number buttons from the above 24, and then press Save. Such as, users want to save the current switching status to scene 1, users only need to press number 1 and then choose Save.(Note: This function only can be used under unlock status) Recall scene: After the scenes saved successfully, user also can choose the scene name to recall the previous/saved switching status. Such as users want to recall scene 6, only need to press number 6 and then press load. Users also can preview the scene switching status by both side windows next to the numbers.
SETUP Icon:
9
Users can change the name of Scene, input and output here. After changing the default settings, users need to press Save to save the changes.Change the name of scenes, only need to press Scene icon at the left bottom, showing as below:
Then change to the needed names:
Users also can change all the 24 scenes name together or one by one and then to press the save button, as below:
11
After users changed the names, and when back to the SWITCH and SCENE interface, users can see the names have been well changed, showing as below:
VIEW Icon:After press VIEW button, will show below interface, users can change the IP address, display and sound settings here, also unlock and lock, get help information as so on.
12
Unlock: All the equipment have been locked, users need to unlock the equipment if need to change the default settings. First, press Unlock button, and enter the default password: 12345678 and press Enter to unlock the equipment. After unlocked the equipment, users can change the names of the scene, inputs, outputs, IP address and so on.
Introduction for the shortcut icons:
13
8.2 WEB
controlTouch Manager series products support dual control system, the default IP address are: 192.168.0.80(first one/ left one) and 192.168.1.80(first one/ right one). If users using the first one to control the matrix. First step, users need to make the sure RI-45 cable is workable and well connected with the control PC. Second, users need to change the IP address of the control PC at the same segment.Third, users only need to open the browser and type the matrix IP 192.168.0.80 and enter, will show below interface:
Default user name and password are the same: admin, then click to Logo in
Switch interface:Users can switch and control with the same way on the touch panels
图标 Introduction Example
Switch one to all Press the input number, then press this button to switch to all
Close the specific input switching status
Press any input number, then press this button to close the switching status
Switch one to one Press this button to realize one to one switching status
Close all the switching status
Press this button to close all the switching status
Save scene Press this button will turn to the scene save interface
Recall scene Press this button will turn to the scene recall interface
14
Caption Interface:Users can change the name of scene, inputs and outputs here, and click to save after changes
Manager InterfaceUsers can click research button to find all the matrices at the same segment but different IP addresses and to control, rename the other equipment by simple clicks.
Basically, under the same local network, users can control hundreds of the matrices at the same segment but different IP addresses by simple click and research, the maximum can up to 254 units.
15
Such as below, there are two matrices: 40x40(IP: 192.168.1.181) and 10x10(IP: 192.168.1.88) users only need to click research, two matrices will be showing as below:
Setup Infterface:Users can reboot system, change IP address, administrator here
After click reboot system, will show below interface for users to reboot the system
Click Change Setup of Ethernet, will show below interface for users to change the IP address here:
16
Note: After changing the IP address, users need to back to the reboot system to reboot, after restart the equipment, the new IP address is working.
After click Change Setup of Administrator, will show below interface for users to change the user name and Logo in pass word here, after changes, only need to press Save button to save.
Click More will have some other options listed as below: Script, Screen, Upgrade and DeBug
8.3 3rd Party control
Baud rate: 115200; data bit: 8; Stop bit:1; Check bit: None
17
Type Control command Function description
Command
[x1]All. Switch [x1] input to all the outputs
All[1]. Switch all the channels to be one to one. Eg.1->1,2->2,3->3……
[x1]X[x2]. Switch [x1] input to [x2] output
[x1]X[x2]&[x3]&[x4]. Switch [x1] input to [x2], [x3], [x4]
Save[Y]. Save current status to [Y], [Y] can be number 1-9
Recall[Y]. Recall the saved [Y] scene
BeepON. Buzzer on
BeepOFF. Buzzer off
Note:
1. [x1], [x2], [x3], [x4] are the inputs and outputs, normally depend on the matrix, if the matrix is a 10x10 matrix, then the effective range are from 1 to 10. Can’t send this kinds of words ‘[‘And’]’
2. Every command need to add the words ‘-’
3. The letters can be capital and small letter
9. Common issues:
No respond on the touch screen
◆ Make sure all the power code well connected
◆ Check the display switcher and make sure it’s in good condition
◆ Make sure the the DVI cable between the device and display are short than 7 meters
◆ Reconnect the DVI cable and restart the system
◆ Make sure the signal sources are on
◆ Check the cables between the devices and displays are connected correctly.
◆ Dial the switcher 7 to 1, then dial the switcher1,2 and choose the corresponding inputs.
◆ Make sure the resolution less than WUXGA(1920*1200)/ 60HZ
◆ Make sure the display can support the output resolution.
10. After-Sales10.1 Warranty Information
The Company warrants that the process and materials of the product are not defective under normal
use and service for 3 (3) years following the date of purchase from the Company or its authorized
distributors.
18
If the product does not work within the guaranteed warranty period, the company will choose and pay
for the repair of the defective product or component, the delivery of the equivalent product or
component to the user for replacement of the defective item, or refund the payment which users
have made.
The replaced product will become the property of the Company.
The replacement product could be new or repaired.
Whichever is longer, any replacement or repaired of the product or component is for a period of
ninety (90) days or the remaining period of the initial warranty. The Company shall not be responsible
for any software, firmware, information, or memory data contained in, stored in, or integrated with
the product repaired by the customer's return, whether or not during the warranty period.
10.2 Warranty limitations and exceptions
Except above limited warranty, if the product is damaged by over usage, incorrectly use, ignore, accident, unusual physical pressure or voltage, unauthorized modification, alteration or services rendered by someone other than the Company or its authorized agent, the company will not have to bear additional obligations. Except using the product properly in the proper application or normal usage
11. Version Information
Description of version(Document number:DOC-*Touch Manager)Date Version number Description
Dec 2016 V1.01.01 First version