Marv Haugen Enterprises * 1851 Heartland Ave. * Casselton ND 58012 Phone: 877-580-6218
Prices Effective 01/15/2019www.haugenattachments.com
Price List 2019Skid-Steer & Tractor Attachments
Price Book Index
Pg. 2 All prices and specifications subject to change without notice. (Printed 01-15-2019)
Product Page #
Industrial Jibs - AdjustableTruss Jibs - Skid-Steers Page 4
Stump BucketsRock DiggersClamp-on Forks
Page 5
Pallet Forks - Skid-SteerPallet Forks - Euro Page 6
Trailer Spotters3 point Trailer Spotters Page 7
Bale Spears Pages 8-9
Dirt Buckets/Utility BucketsTooth BucketsSnow Buckets - Standard / Medium/ Mega
Pages 10-11
Bolt-on Cutting EdgesTooth BarsWeld-on Teeth
Page 12
Conveyer Buckets Page 13
Bolt-on GrapplesUtility ForksUtility Grapples
Page 14
Skeleton Rock BucketsRod Buckets Page 15
Skeleton Rock GrappleScrap GrapplesGrapple RakesRod GrapplesIndustrial Rod Grapples
Page 16-18
Round Bale GrapplesTree PullersConcrete Buckets
Page 19-20
Pg. 3
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Product Page #Rotary TillersLand Planes Page 21
Pickup Broom - Skid-SteerPower Angle Brooms - Skid-Steer Page 22-23
Snow Blades Page 24
Snow Pushers Page 25
Post Drivers Pages 26
Auger Drive UnitsAuger Bits and TeethAuger Extensions
Page 27-31
Trenchers Page 32-33
Snow Blowers - ( Skid-Steer & Tractor) Page 34-35
Tach-All’sSlope Tach Page 36-37
Bolt-on Grapples - Compact TractorsDirt Buckets - Compact TractorsRod Buckets - Compact Tractors
Page 38
Tree ShearsBrush Mowers Page 39
Fertilizer Buckets - Articulating LoadersCarpet Poles - Skid-Steer Pages 40-41
3-point AdaptorsQuick Attach PlatesEuro Mounts
Page 42
Carriage Bars / Hook-over Bucket ForksShaft Style Replacement Forks Page 43-44
Dealer Discount Structures Page 45
Pg. 4 All prices and specifications subject to change without notice. (Printed 01-15-2019)
Skid-Steer Industrial Jib
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
- Available in 6’, 9’, and 12’ lengths- Built light weight to maximize lift capacity- Equipped with a Pintle Hitch- Built in back angle to increase rollback- 6 foot model has a 2000 lbs capacity- 9 and 12 foot models have a 1000 lbs capacity
Skid-Steer Truss Jibs
- Telescopes from 5 feet to 8 feet.- 7 positions from 27 3/4” to 99 3/4”.- 2000 lbs capacity at 8 feet.- Built in back angle to increase rollback.- Holes on the frame to accompany extra hooks- Comes equipped with a 5 ton eye hook
Model # Capacity Positions Weight List PriceMIJ-SKD 2000 lbs at 8 feet 7 positions from 27/75” to 99.75” 380 lbs $1,695.00
Model # Capacity Length Weight List PriceMSTJ 6 2000 lbs 6 feet 325 lbs $1,350.00MSTJ 9 1000 lbs 9 feet 375 lbs $1,395.00MSTJ 12 1000 lbs 12 feet 405 lbs $1,495.00
Pg. 5All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Stump Bucket - For Skid-Steers
Rock Digger - For Skid-Steers
- Works Great for digging up boulders- 1 inch thick Tines made from AR 400 Steel- 36 inch long tines- Heavy Duty back rest- 8 inch spacing between the tines- Heavily gusseted Quick Attach
- Cantilever design makes stump removal many times easier - Great for cutting square bottom trenches and waterways- 1/2” Steel Construction- 3 weld-on Teeth with replaceable tips
Clamp-on Bucket Forks
Model # Bucket Height
Bucket Depth
Bucket Width (Front)
Bucket Width (Back)
Weight List Price
MSB 12 20.50” 56.00” 12” 18” 525 lbs $1,425.00
Model # Frame Height Frame Width Tine Spacing Weight List Price
MRD 36 34” 45” 8” 480 lbs $1,925.00
Clamps on to buckets for Compact Tractors, Wheel Loaders and Tractor
Loader Backhoes
Model # Tine Length
Capacity Weight List Price
MCOF 2 36 inches 2000 lbs 110 lbs $525.00MCOF 2L 42 inches 2000 lbs 125 lbs $545.00MCOF 4 42 inches 4000 lbs 170 lbs $690.00MCOF 4L 48 inches 4000 lbs 180 lbs $699.00MCOF 6 48 inches 6000 lbs 275 lbs $999.00
Pg. 6
Skid-Steer Pallet Forks- 5000 lbs or 6000 lbs capacity- 42”, 48”, 60” or 72” tines- Rail Style frame width 45”- Heavy Duty and Made in the USA
- Frame width 45 inches - 42”, 48”, 60”or 72” tines- 5000 or 6000 lbs capacity - Walk through frame with step
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model # Fork Length Fork Size Weight Lift Capacity List PriceMPF 42-10 42” 1.50” x 4” 385 lbs 5000 lbs $945.00MPF 48-10 48” 1.50” x 4” 395 lbs 5000 lbs $950.00MHPF 48-10 48” 1.75” x 4” 495 lbs 6000 lbs $1,075.00MHPF 60-10 60” 1.75” x 4” 530 lbs 6000 lbs $1,175.00MHPF 72-10 72” 1.75” x 4” 560 lbs 6000 lbs $1,395.00
Large Volume Pricing available --- Call For Details
Model # Fork Length Fork Size Weight Lift Capacity List PriceMPF 42-WT 42” 1.50” x 4” 375 lbs 5000 lbs $955.00MPF 48-WT 48” 1.50” x 4” 385 lbs 5000 lbs $960.00MHPF 48-WT 48” 1.75” x 4” 485 lbs 6000 lbs $1,085.00MHPF 60-WT 60” 1.75” x 4” 520 lbs 6000 lbs $1,185.00MHPF 72-WT 72” 1.75” x 4” 550 lbs 6000 lbs $1,395.00
Large Volume Pricing available --- Call For Details
Walk Through Frame - Rail Style Pallet Forks
Euro Mount Pallet Forks - 5000 lbs or 6000 lbs capacity- 42”, 48” or 60” tines
Model # Fork Length
Fork Size
Weight Lift Capacity
List Price
MPF 42-Euro 42” 1.50” x 4” 400 lbs 5000 lbs $990.00MPF 48-Euro 48” 1.50” x 4” 410 lbs 5000 lbs $995.00MHPF 48-Euro 48” 1.75” x 4” 505 lbs 6000 lbs $1,150.00MHPF 60-Euro 60” 1.75” x 4” 545 lbs 6000 lbs $1,255.00
- Frame width 45 inches - 42”, 48”, 60”or 72” tines- 5000 or 6000 lbs capacity - Walk through frame with step
Walk Through Frame - Rail Style Pallet Forks
All prices and specifications subject to change without notice. (Printed 01-15-2019) Pg. 7
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Skid-Steer Trailer Spotters - Powder Coated- Extra ball holder
Skid-Steer Trailer Spotters- Extreme Duty construction
3-Point Mounted Trailer Spotters - Fits cat. 2 and 3- Top Ball position for Gooseneck Trailers- Powder Coat finish
Model # Description Weight List PriceMBA-SKD Ball Hitch adapter for Skid-Steer Loaders 135 lbs $435.00
Hitch Balls not included
Model # Description Weight List PriceHBA-3PT Ball Hitch Adapter Cat. 0 & 1 75 lbs $319.00HBA-3PT23 Ball Hitch Adapter Cat. 2 & 3 125 lbs $542.00
Hitch Balls not included
Model # Description Weight List PriceHBA-SKD Ball Hitch adapter for Skid-Steer Loaders 135 lbs $455.00
Hitch Balls not included
- Fits cat. 0 and 1- Has a ledge for holding tractor weights- Zinc coated pins and Powder Coat finish
Skid-Steer Trailer Spotters
Model # Description Weight List PriceMBA-E Ball Hitch adapter for Skid-Steer Loaders 95 lbs $355.00
Hitch Balls not included
- Economy Trailer Spotter- Perfect moving small trailers.
Skid-Steer Bale Spears
Pg. 8
- Heavy Duty German Made Conus Tines and 1045 Cold Rolled Steel Tines- Built-in 15 Degree back angle for carrying bales- All Bale Spear Tines are replaceable
Telehandler Bales Spears available
Call for Details
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model # Tines Weight List PriceMRBS-C2 One 49” Conus 2 Tine
Two 24” Cold Rolled Tines175 lbs $650.00
MRBS-C2-Euro One 49” Conus 2 TineTwo 24” Cold Rolled Tines
185 lbs $690.00
Round Bale Spear
Model # Tines Weight List PriceMBF-C2 Two 49” Conus 2 Tine 190 lbs $760.00
MBF-C2 Euro Two 49” Conus 2 TineEuro Mount
205 lbs $799.00
Model # Tines Weight List PriceMSBS-C1 Three 32.4” Conus 1 Tines
27” useable Tine190 lbs 650.00
MSBS-C2 Three 39.0” Conus 2 Tines34” useable Tine
205 lbs 795.00
Model # Tines Weight List PriceMCBS-C2 One 49” Conus 2 Tine
Three 32.4” Conus 1 Tines225 lbs 995.00
Pg. 9
Cold Rolled TinesReplacement Tines for Haugen Bale Spears - Hardware included - Material 1045 Cold Rolled
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Forged Tapered Tines
Model # Tines Weight List PriceMLSBS-CR Two 42” Cold Rolled Tines
Two 34” Cold Rolled Tines255 lbs $999.00
Model # Tines Weight List PriceMLSBS-C2 Four 39” Conus 2 Tines 245 lbs $1135.00
Large Square Bale Spear Cold Rolled Tines
Large Square Bale Spear Conus Tines
Easily add High Back extensions from the factory or do it yourself with the ready
made high back openings
Easily add High Back extensions from the factory or do it yourself with the ready
made high back openings
Model # Description Diameter Weight List PriceCR-24 24” Cold Rolled Tine 1.50” 9 lbs $59.00
CR-34 34” Cold Rolled Tines 1.75” 24 lbs $97.00CR-42 42” Cold Rolled Tines 1.75” 29 lbs $115.00CR-48 48” Cold Rolled Tines 2.00” 42 lbs $155.00
Model # Description Weight List PriceCT1-324 Conus 1 - 32.4” Tine 9.5 lbs $85.00CT2-390 Conus 2 - 39.0” Tine 18.0 lbs $135.00CT2-490 Conus 2 - 49.0” Tine 21.0 lbs $155.00CTS-1 Conus 1 Sleeves 2.0 lbs $27.00CTS-2 Conus 2 Sleeves 4.0 lbs $30.00
Highest Quality German Made!
Dirt Buckets
Utility Buckets
Pg. 10
Add Tooth Bars & Bolt on Edges
see page 24
Add Tooth Bars & Bolt on Edges
see page 24 - Works great for fertilizer and other bulk materials
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model Bucket Height
InsideDepth
Bucket Width
Heaped Capacity Weight List Price
MHUB 72 24” 36” 72” 25.75 cu. ft. 750 lbs $1,750.00MHUB 78 24” 36” 78” 28.00 cu. ft. 780 lbs $1,850.00MHUB 84 24” 36” 84” 30.25 cu. ft. 810 lbs $1,895.00MHUB 90 24” 36” 90” 32.50 cu. ft. 840 lbs $1,950.00MHUB 96 24” 36” 96” 34.75 cu. ft. 870 lbs $1,975.00
Shown with optional Bolt-on Edge
Model Bucket Height
InsideDepth
Bucket Width
Heaped Capacity Weight List Price
MHDB 60 20.50” 34” 60” 14.25 cu. ft. 570 lbs $1,325.00MHDB 66 20.50” 34” 66” 15.80 cu. ft. 605 lbs $1,350.00MHDB 72 20.50” 34” 72” 17.25 cu. ft. 635 lbs $1,435.00MHDB 78 20.50” 34” 78” 18.75 cu. ft. 665 lbs $1,475.00MHDB 84 20.50” 34” 84” 20.50 cu. ft. 695 lbs $1,595.00MHDB 90 20.50” 34” 90” 22.75 cu. ft. 730 lbs $1,635.00MHDB 96 20.50” 34” 96” 24.50 cu. ft. 765 lbs $1,650.00
- Heavy duty 3/8” skidsteer plate - Series 23 weld-on teeth with replaceable tips - GR 50 Side plates and stiffners - 3/4” x 6 beveled edge
Model # Description # of Teeth Weight List Price
MHDB 60 WT 60” Tooth Bucket 6 630 lbs $1,595.00MHDB 66 WT 66” Tooth Bucket 7 662 lbs $1,625.00MHDB 72 WT 72” Tooth Bucket 8 690 lbs $1,680.00MHDB 78 WT 78” Tooth Bucket 9 722 lbs $1,750.00MHDB 84 WT 84” Tooth Bucket 10 752 lbs $1,895.00MHDB 90 WT 90” Tooth Bucket 11 782 lbs $1,995.00
- Heavy duty 3/8” skidsteer plate - Grade 50 Side plates and stiffners - 1/4” Steel Floor . - 3/4” x 6 beveled edge
Tooth Buckets
Dirt Buckets
Utility Buckets
Tooth Buckets
Pg. 11
Medium Snow Buckets
Snow Buckets Bolt on Edges see page 12
Bolt on Edges see page 12
Bolt on Edges see page 12
Mega Snow Buckets
- For Skid-Steers
- For Skid-Steers
- For Skid-Steers
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model Bucket Height
InsideDepth
Bucket Width
Heaped Capacity Weight List Price
MSB 60 27” 37” 60” 22.25 cu. ft. 480 lbs $1,505.00MSB 66 27” 37” 66” 24.50 cu. ft. 510 lbs $1,545.00MSB 72 27” 37” 72” 26.50 cu. ft. 540 lbs $1,550.00MSB 78 27” 37” 78” 28.75 cu. ft. 570 lbs $1,595.00MSB 84 27” 37” 84” 31.00 cu. ft. 610 lbs $1,615.00MSB 90 27” 37” 90” 33.00 cu. ft. 640 lbs $1,620.00MSB 96 27” 37” 96” 35.25 cu. ft. 670 lbs $1,625.00MSB 102 27” 37” 102” 37.50 cu. ft. 710 lbs $1,725.00MSB 108 27” 37” 108” 39.75 cu. ft. 750 lbs $1,795.00
Model Bucket Height
InsideDepth
Bucket Width
Heaped Capacity Weight List Price
MMSB 72 30” 41” 72” 32.10 cu. ft. 710 lbs $1,875.00MMSB 84 30” 41” 84” 37.40 cu. ft. 775 lbs $1,899.00MMSB 96 30” 41” 96” 42.70 cu. ft. 825 lbs $1,910.00MMSB 102 30” 41” 102” 44.90 cu. ft. 875 lbs $1,999.00
Model Bucket Height
InsideDepth
Bucket Width
Heaped Capacity Weight List Price
MHSB 84 42” 42.5” 84” 45.35 cu. ft. 975 lbs $2,065.00MHSB 96 42” 42.5” 96” 51.30 cu. ft. 1050 lbs $2,075.00MHSB 102 42” 42.5” 102” 55.10 cu. ft. 1190 lbs $2,295.00
Pg. 12
Bolt-on Edges
Bolt-on Tooth Bars
- 5/8” x 8” Double Bevel High Carbon Cutting Edge- Hole spacing 6 inch on center
- For Skid-Steer Bucket with a Weld-on Cutting Edge- Custom sizes available
Bucket Accesssories
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Model # of Teeth Width Weight List PriceMTB 60 6 60” 145 lbs $619.00MTB 66 8 66” 165 lbs $710.00MTB 72 8 72” 175 lbs $725.00MTB 78 10 78” 190 lbs $817.00MTB 84 10 84” 205 lbs $837.00
- For Skid-Steer Buckets with a Bolt-on Cutting Edge- Custom sizes available
Model # of Teeth Width Weight List PriceMTW 60 6 60” 115 lbs $543.00MTW 66 7 66” 125 lbs $579.00MTW 72 8 72” 135 lbs $614.00MTW 78 9 78” 145 lbs $652.00MTW 84 10 84” 155 lbs $683.00
Bolt-on Tooth Bars
Model Bucket Size # of Holes Weight List Pricewith Hardware
BOE 60 60” 10 82 lbs $320.00BOE 66 66” 11 91 lbs $328.00BOE 72 72” 12 99 lbs $339.00BOE 78 78” 13 107 lbs $345.00BOE 84 84” 14 114 lbs $368.00BOE 90 90” 15 120 lbs $375.00BOE 96 96” 16 126 lbs $381.00BOE 102 102” 17 132 lbs $409.00BOE 108 108” 18 138 lbs $419.00
Bolt-on Tooth Bars
Bolt-on Tooth Bars
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Conveyer Buckets- 1/4” reinforced steel floor- Heavy Duty skid-steer quick attach- 3/8” Side plates and inside gussets
- 3/4” Cutting edge- 1/2” x 3” wear bars- Optional Bolt-on edges
Pg. 13All prices and specifications subject to change without notice. (Printed 01-15-2019)
Model Bucket Height
Side Plate Height
Bucket Depth
Bucket Width
Number of Inside gussets
List Price
MCB 3072 20” 6” @ 30” 72” 30” - $1,895.00MCB 3672 20” 6” @ 30” 72” 36” - $1,895.00MCB 4872 20” 6” @ 30” 72” 48” 1 $2,150.00MCB 6072 20” 6” @ 30” 72” 60” 2 $2,250.00MCB 3696 20” 6” @ 30” 96” 36” - $2,350.00MCB 4896 20” 6” @ 30” 96” 48” 1 $2,450.00
Custom Lengths, Widths and Side Plate Heights available
Model Bucket Size
# of Holes
List Price
BOE 30 30” 5 $180.00BOE 36 36” 6 $210.00BOE 48 48” 8 $280.00BOE 60 60” 10 $320.00
Bolt-on Edges
Pg. 14
Bolt-on GrapplesBolts on to Buckets, Manure/Utility Forks and Rock Buckets from 59 to 84 inches
Utility/Manure Fork with Grapple
Utility/Manure Fork
1 3/4” Round Tines
- 1 3/4” replaceable tines- 44” Grapple opening- Great for moving manure or brush
- For Skid-Steers
- For Skid-Steers
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model # Grapple Opening
Grapple Width Weight List Price
MBOG 59-84 44.00” 52.50” 225 lbs $1,450.00MFFC Universal Flush Face Couplers $105.00
Model # # of tines Bucket Width Weight List PriceMUMF 52 8 52 inches 540 lbs $1,647.00MUMF 59 9 59 inches 580 lbs $1,687.00MUMF 66 10 66 inches 620 lbs $1,746.00MUMF 73 11 73 inches 660 lbs $1,795.00MUMF 80 12 80 inches 700 lbs $1,830.00MUMF 87 13 87 inches 740 lbs $1,903.00
Model # # of tines Bucket Width
Grapple Width Weight List Price
MUMFG 66 10 66.00” 63.00” 910 lbs $2,882.00MUMFG 73 11 73.00” 63.00” 955 lbs $2,934.00MUMFG 80 12 80.00” 77.00” 1010 lbs $2,995.00 RT 34 34” Replacement Tine $79.00
Skeleton Rock Buckets
Rod Buckets
- Heavy Duty Tines 3/8” thick- 3” Tine spacing with a serrated front edge- Great for picking rocks and other debris
- Tooth Bar with replaceable teeth- Great for picking rocks and other debris
- For Skid-Steers
- For Skid-Steers
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Industrial Rod Buckets- Tooth Bar with replaceable teeth- Great for picking rocks and other debris
- Available for Skid-Steers and Tractor Loaders
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model # # of tines Bucket Width Weight List PriceMSRB 60 16 60 inches 540 lbs $1,575.00MSRB 66 18 66 inches 585 lbs $1,635.00MSRB 73 20 73 inches 635 lbs $1,740.00MSRB 78 21 78 inches 675 lbs $1,810.00
MSRB 84 23 84 inches 715 lbs $1,925.00MSRB 92 25 92 inches 765 lbs $2.025.00
Model # # of tines Tine Size Bucket Width Weight List PriceHRB 60 14 7/8” 60 inches 565 lbs $1,750.00HRB 68 16 7/8” 68 inches 650 lbs $1,900.00HRB 76 18 7/8” 76 inches 690 lbs $2,060.00
Model # # of tines Tine Size Bucket Width Weight List PriceHIRB 76 18 1” x 1.5” Bar 76 inches 905 lbs $2,715.00HIRB 84 20 1” x 1.5” Bar 84 inches 995 lbs $2,920.00
Pg. 15
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
- Heavy Duty Tines 3/8” thick- 3” Tine spacing with a serrated front edge- Great for picking rocks and other debris- Independant acting Double cylinder grapples- Protected hose routing with cylinder gaurds- Removeable side plates for added versatility- Geaseable Zinc coated pins - Heavy duty reinforced skidsteer plate.- 90 Degree Couplers included
Skeleton Rock Grapple with 3” Tine Spacing
Model Bolt-onSides
Tine Spacing
# of tines
Bucket Width Weight List Price
MSRG 72 Yes / Std. 3.00” 20 72 inches 950 lbs $3,759.00MSRG 78 Yes / Std. 3.00” 21 78 inches 1015 lbs $3,849.00MSRG 84 Yes / Std. 3.00” 23 84 inches 1050 lbs $3,925.00
Skeleton Brush Grapple with 6” Tine Spacing
Model Bolt-on Sides
Tine Spacing
# of Tines
Bucket Width Weight List Price
MSBG 72 Optional 6.00” 10 72 inches 825 lbs $3,425.00MSBG 78 Optional 6.00” 11 78 inches 875 lbs $3,495.00MSBG 84 Optional 6.00” 12 84 inches 925 lbs $3,550.00MGS-01 Bolt-on Side Plates ( includes two sides and hardware) $145.00
Skeleton Grapples
All prices and specifications subject to change without notice. (Printed 01-15-2019)Pg. 16
Grapple Rake
- For Skid-Steers
Scrap Grapples- Designed for general clean up and scrap yards- Independent grapples allow for uneven loads- 2 1/2” x 10” Industrial Cylinders- Comes standard with a weld-on high carbon edge and a 3/4” x 8” Bolt-on cutting edge.
- Designed for demolition and debris clean up- 53” Clam opening- Replaceable tips on Bucket teeth- Spring loaded hose guide to help protect the hoses from damage- 3” x 10” Industrial Cylinders- Built in cylinder guards- Bucket Tooth material is 3/4” Thick T-1 Steel- Grapple Teeth are made from 1/2” thick grade 50- Tooth spacing 8”- Powder Cost finish
- For Skid-Steers
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model # Bucket Width Grapple Opening Weight List PriceHSG 60 60.00” 37.00” 925 lbs $3,997.00HSG 66 66.00” 37.00” 940 lbs $4,170.00HSG 72 72.00” 37.00” 955 lbs $4,450.00HSG 78 78.00” 37.00” 980 lbs $4,515.00HSG 84 84.00” 37.00” 1005 lbs $4,650.00
Grapple Rake
Model # Bucket Width Grapple Width # 0f Teeth Weight List PriceHGR 78 78.00” 73.00” 10 1330 lbs $5,415.00HGR 86 86.50” 82.00” 11 1456 lbs $5,765.00
Add Euro or other tractor mounts - Call for details
- For Skid-Steers
All prices and specifications subject to change without notice. (Printed 01-15-2019) Pg. 17
- Designed for Rocks and Brush- Tine size is 1” x 1.50” bars- Tine Spacing 3” between tines- Independent grapples allow for uneven loads- 2.5”x 10” Industrial Cylinders- Replaceable pin-on Teeth
Pg. 18
Rod Grapples- Designed for Rocks and Brush- Independent grapples allow for uneven loads- Rod size 7/8”- 2 1/2” x 10” Industrial Cylinders- Tine spacing is 3 inches- Replaceable pin-on Teeth
- For Skid-Steers
- For Skid-Steers
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Industrial Rod Grapples
Model # Bucket Width Grapple Opening Weight List PriceHRDG 60 60.00” 38.00” 930 lbs $3,995.00HRDG 68 68.00” 38.00” 994 lbs $4,099.00HRDG 76 76.00” 38.00” 1046 lbs $4,350.00
Model # Bucket Width Grapple Opening Weight List PriceHIRDG 76 76.00” 38.00” 1250 lbs $4,750.00HIRDG 84 84.00” 38.00” 1365 lbs $4,999.00
Add Euro or other tractor mounts - Call for details
Haugen’s Round Bale Grapple is perfect for grabbing
and hauling Large Round Bales, Brush and other debris
- For Skid-Steers
- For Skid-Steers
All prices and specifications subject to change without notice. (Printed 01-15-2019) Pg. 19
Round Bale Grapple Haugen’s Round Bale
Grapple is perfect for grabbing and hauling Large Round Bales,
Brush and other debris
- 72”, 84”, and 96” Wide Bucket - Replaceable Curved Tips on the grapple - 30” Tall Bucket- 42” Deep (Front to Back)- 60” Wide Grapple- 82” Grapple Opening- Powder Coat Finish
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model # Mount Bucket Width Grapple Opening Weight List Price
HBG-72 SKD Skid-Steer 72.00” 82.00” 1030 lbs $4,585.00HBG-84 SKD Skid-Steer 84.00” 82.00” 1200 lbs $4,750.00HBG-96 SKD Skid-Steer 96.00” 82.00” 1370 lbs $5,060.00
*Skid-Steer model include the Flat Face couplers*Euro/Global Mounts do not come with couplers
HBG-72 EURO Euro/ Global 72.00” 82.00” 1030 lbs $4,685.00HBG-84 EURO Euro/ Global 84.00” 82.00” 1200 lbs $4,850.00HBG-96 EURO Euro/ Global 96.00” 82.00” 1370 lbs $5,160.00
Model # Description Capacity Weight List Price
HTP 12 12” Tree Puller with a back rest 12” 400 lbs $2,115.00*Hydraulic model includes the Hoses and Flat Face couplers
Tree Puller - For Skid-Steers
- 2 x 10 Industrial Cylinder.- Spring loaded hose guides- 12” Jaw opening. - Powder coat finish.
Pg. 20 All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model # Mount Bucket Width Grapple Opening Weight List Price
HBGR-72 SKD Skid-Steer 72.00” 82.00” 1030 lbs $5,599.00HBGR-84 SKD Skid-Steer 84.00” 82.00” 1200 lbs $5,799.00HBGR-96 SKD Skid-Steer 96.00” 82.00” 1370 lbs $5,950.00
*Skid-Steer model include the Flat Face couplers*Euro/Global Mounts do not come with couplers
HBGR-72 EURO Euro/ Global 72.00” 82.00” 1030 lbs $5,699.00HBGR-84 EURO Euro/ Global 84.00” 82.00” 1200 lbs $5,899.00HBGR-96 EURO Euro/ Global 96.00” 82.00” 1370 lbs $6,050.00
Round Bale Grapple with a removeable grapple
- Easily take the grapple on and off with removing 2 pins.- 30” tall and 42” deep heavy duty bucket - Powder coat finish
- For Skid-Steers
- 1/2 Yard Capacity- Open gate or Hydraulic gate - 60” Bucket width- 20”Bucket height- Powder coat finish
Concrete BucketTransport concrete into hard
to reach areas with your Skid-Steer
Model # Description Capacity Weight List Price
HCB Open Chute with extension 1/2 yard 400 lbs $1,460.00HCB-H Hydraulic Chute with extension 1/2 yard 470 lbs $2,390.00
*Hydraulic model includes the Hoses and Flat Face couplers
Land Planes- Replaceable 5/8” x 8” Bolt-on Cutting Edges on front and back of the Land Plane- Sizes available 72”, 78”, 84” and 90”- Available with or without Scarifier
Scarifier (optional) - Sizes available 72”, 78”, 84” and 90”- Replaceable Teeth
Pg. 21
Rotary Tillers- Tilling depth 6 inches - Replaceable Tines- Sizes available 52”, 68”and 76”- Tiller is offset to the right hand side of the machine
Tills Forward or Backwards
- For Skid-Steers
- For Skid-Steers
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model # Tilling Width Overall Width # of Tines Weight List PriceHST 52 52” 68.00” 28 500 lbs $4,799.00HST 68 68” 79.00” 36 590 lbs $4,995.00HST 76 76” 87.00” 40 630 lbs $5,180.00
Includes hoses and Flat Face couplers
Model # Width Weight Land Plane Add ScarifierMLP 72 72” 675 lbs $1,830.00 $1,205.00MLP 78 78” 710 lbs $1,915.00 $1,250.00MLP 84 84” 745 lbs $1,935.00 $1,295.00MLP 90 90” 780 lbs $1,970.00 $1,350.00
Land Plane - With Mesh- Sizes available 72”, 78”and 84” widths
Model # Width Weight List PriceHLP 72 72” 530 lbs $1,570.00HLP 78 78” 570 lbs $1,665.00HLP 84 84” 610 lbs $1,770.00
Pg. 22
Features: - Available Sizes 63”, 75” and 87” Sweeping Widths - Replaceable Polypropylene Bristles - Hydraulic direct drive - Adjustable arbor controls bristle pressure to the surface helping to extend bristle life- The sweeper is perfect to clean parking lots, warehouses, side walks and other job sites - Optional Gutter brooms- Optional water kit for dust control - Optional Poly /Wire Bristles
Pick-Up Brooms for Skid-Steers
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
72 inch Pick-Up Broomshown with the optional gutter broom
Model # Description Sweeping Width
Brush Diameter
Hyd. FlowRange Weight List Price
HPB 60 60” Pick-up Broom 63.00” 26” 15-35 gpm 979 lbs $5,630.00HPB 72 72” Pick-up Broom 75.00” 26” 15-35 gpm 1175 lbs $5,880.00HPB 84 84” Pick-up Broom 87.00” 26” 15-35 gpm 1374 lbs $6,235.00
*Skid-Steer model includes the Flat Face couplers
Gutter Broom Option - Factory option or field installedHPB-1-001 Includes gutter brush, Motor, Hoses and Wiring Kit $1,999.00
Bristle Options - Brooms come standard with all poly waffers
HPB-2-001 Half Poly and Half Wire Bristles “ price in lieu of all poly ” $105.00
Water KitWK-001 Water kit with nozzles and hoses $1,050.00
Replacement Waffer refill kitsHPB-P-060 Waffer kit for a 60” pick-up Broom ( 26” diameter ALL POLY waffers) $750.00HPB-P-072 Waffer kit for a 72” pick-up Broom ( 26” diameter ALL POLY waffers) $848.00HPB-P-084 Waffer kit for a 84” pick-up Broom ( 26” diameter ALL POLY waffers) $945.00HPB-PW-060 Waffer kit for a 60” pick-up Broom ( 26” diameter Half POLY/HALF WIRE waffers) $815.00HPB-PW-072 Waffer kit for a 72” pick-up Broom ( 26” diameter Half POLY/HALF WIRE waffers) $921.00HPB-PW-084 Waffer kit for a 84” pick-up Broom ( 26” diameter Half POLY/HALF WIRE waffers) $1,032.00
- For Skid-Steers
Model # Description Sweeping Width
Brush Diameter
Hyd. FlowRange Weight List Price
HPB 60 60” Pick-up Broom 63.00” 26” 15-35 gpm 979 lbs $5,630.00HPB 72 72” Pick-up Broom 75.00” 26” 15-35 gpm 1175 lbs $5,880.00HPB 84 84” Pick-up Broom 87.00” 26” 15-35 gpm 1374 lbs $6,235.00
*Skid-Steer model includes the Flat Face couplers
Gutter Broom Option - Factory option or field installedHPB-1-001 Includes gutter brush, Motor, Hoses and Wiring Kit $1,999.00
Bristle Options - Brooms come standard with all poly waffers
HPB-2-001 Half Poly and Half Wire Bristles “ price in lieu of all poly ” $105.00
Water KitWK-001 Water kit with nozzles and hoses $1,050.00
Replacement Waffer refill kitsHPB-P-060 Waffer kit for a 60” pick-up Broom ( 26” diameter ALL POLY waffers) $750.00HPB-P-072 Waffer kit for a 72” pick-up Broom ( 26” diameter ALL POLY waffers) $848.00HPB-P-084 Waffer kit for a 84” pick-up Broom ( 26” diameter ALL POLY waffers) $945.00HPB-PW-060 Waffer kit for a 60” pick-up Broom ( 26” diameter Half POLY/HALF WIRE waffers) $815.00HPB-PW-072 Waffer kit for a 72” pick-up Broom ( 26” diameter Half POLY/HALF WIRE waffers) $921.00HPB-PW-084 Waffer kit for a 84” pick-up Broom ( 26” diameter Half POLY/HALF WIRE waffers) $1,032.00
Power Angle Brooms for Skid-Steers- Easy to use built in leveling system- 32 inch diameter brushes- 30 degree Manual or Hydraulic Angle- Bristles come in all poly or poly/wire combination - Powder Coat Paint
- Hydraulic motor is set inside the broom for protection- Keep the dust down with an optional water kit- Storage stands keep the bristles off the ground - Simple, straight forward and built Haugen Heavy
Pg. 23All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model # Description Angled Width
Brush Diameter
Hyd. FlowRange Weight List Price
HAB 60-M 60” Angle Broom - Manual angle 53.75” 32” 15-35 gpm 950 lbs $4,915.00HAB 60-H 60” Angle Broom - Hydrualic angle 53.75” 32” 15-35 gpm 990 lbs $6,490.00HAB 72-M 72” Angle Broom - Manual angle 63.50” 32” 15-35 gpm 1025 lbs $5,080.00HAB 72-H 72” Angle Broom - Hydrualic angle 63.50” 32” 15-35 gpm 1050 lbs $6,520.00HAB 84-M 84” Angle Broom - Manual angle 74.25” 32” 15-35 gpm 1100 lbs $5,490.00HAB 84-H 84” Angle Broom - Hydrualic angle 74.25” 32” 15-35 gpm 1150 lbs $6,780.00
*Skid-Steer model include the Flat Face couplers* Hydraulic angle comes with a standard wiring harness. Electric connectors are available call for pricing
Bristle Options - Brooms come standard with all poly waffers
HAB-2-001 Half Poly and Half Wire Bristles “ price in lieu of all poly ” $130.00
Water KitWK-001 Water kit with nozzles and hoses $1,050.00
Replacement Waffer refill kitsHAB-P-060 Waffer kit for a 60” Angle Broom ( 32” diameter ALL POLY waffers) $761.00HAB-P-072 Waffer kit for a 72” Angle Broom ( 32” diameter ALL POLY waffers) $850.00HAB-P-084 Waffer kit for a 84” Angle Broom ( 32” diameter ALL POLY waffers) $933.00HAB-PW-060 Waffer kit for a 60” Angle Broom ( 32” diameter Half POLY/HALF WIRE waffers) $809.00HAB-PW-072 Waffer kit for a 72” Angle Broom ( 32” diameter Half POLY/HALF WIRE waffers) $915.00HAB-PW-084 Waffer kit for a 84” Angle Broom ( 32” diameter Half POLY/HALF WIRE waffers) $999.00
Pg. 24 All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
- Trip Moldboard- Hyd. angle 30 Degree right or left- Oscillation +/- 5 Degrees- Reversible Cutting Edge 3/8” x 6” 1060 material- Greaseable pins and oscillation points- Skid shoes easily adjustable and rotate for longer wear - 2 Hydraulic Cylinders size 1½” x 10”- Poly Cutting Edges available- Available Sizes 72”, 84”, 96” and 108” Widths
- Trip back Cutting Edge- Hyd. angle 30 Degree right or left- Oscillation +/- 6 Degrees- Reversible Cutting Edge 1/2” x 6” 1060 material- Greaseable pins and oscillation points- Skid shoes easily adjustable and rotate for longer wear - 2 Hydraulic Cylinders size 1½” x 10”- Poly Cutting Edges available- Available Sizes 84”, 96” and 108” Widths
Skid-Steer Snow Blades
Trip BackCutting Edge
Skid-Steer Snow Blades
Model # Straight Width
Angled Width
Moldboard Height Weight List Price
HSB 72 72” 58” 28” 575 bs $3,325.00HSB 84 84” 70” 28” 600 lbs $3,405.00HSB 96 96” 82” 28” 625 lbs $3,470.00HSB 108 108” 94” 28” 675 lbs $3,545.00
Model # Straight Width
Angled Width
Moldboard Height Weight List Price
HSBT 84 84” 70” 28” 760 lbs $3,900.00HSBT 96 96” 82” 28” 810 lbs $4,190.00HSBT 108 108” 94” 28” 860 lbs $4,468.00
OptionsModel Description List PriceHSB-SW Side Wing Kit ( includes 2 wings and storage bars ) 416.00HSB-CG Curb Guards ( includes Right & Left Curb guards ) 219.00HSB-CR Cross Over Relief Valve ( recommended on large machines ) 298.00
The Snow Pusher equipped with the Pull Back option is a great tool for cleaning close to doors and buildings.
Great visibility!!
Full Trip Blade
- Trip back Cutting Edge- Hyd. angle 30 Degree right or left- Oscillation +/- 6 Degrees- Reversible Cutting Edge 1/2” x 6” 1060 material- Greaseable pins and oscillation points- Skid shoes easily adjustable and rotate for longer wear - 2 Hydraulic Cylinders size 1½” x 10”- Poly Cutting Edges available- Available Sizes 84”, 96” and 108” Widths
Pg. 25
- 30 inches tall and 38 inches deep- Skid-Shoes are made of AR-400- Heavy Duty 3/8” Side Plates- Powder Coat finish- Optional Pull Back
Skid-Steer Snow Pushers
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
- The rubber edge is 1.50” x 10” and it is adjustable and reversible. The edge can be adjusted by itself or by adjusting the Skid Shoe
Rubber Cutting Edge
- The Steel Edge is a 1/2” x 6” reversible cutting edge. This is adjusted by raising or lowering the Skid Shoe. This makes it a fast and easy adjustment.
Steel Cutting Edge
The Snow Pusher equipped with the Pull Back option is a great tool for cleaning close to doors and buildings.
Great visibility!!
Full Trip Blade
Model # Description Cutting Edge Height / Depth List Price
HSP-84-RUB 84” Skid-Steer Snow Pusher Rubber 30” / 38” $3,250.00HSP-96-RUB 96” Skid-Steer Snow Pusher Rubber 30 / 38” $3,490.00HSP-120-RUB 120” Skid-Steer Snow Pusher Rubber 30 / 38” $4,099.00HSP-84-STL 84” Skid-Steer Snow Pusher Steel 30” / 38” $2,795.00HSP-96-STL 96” Skid-Steer Snow Pusher Steel 30” / 38” $2,995.00HSP-120-STL 120” Skid-Steer Snow Pusher Steel 30 / 38” $3,420.00
Optional Pull BackModel Description List PriceHP-84-STL 84” Pull Back with Steel Edge $599.00HP-96-STL 96” Pull Back with Steel Edge $675.00HP-120-STL 120”” Pull Back with Steel Edge $850.00
Post Drivers
Pg. 26
- Drive wood or steel posts with easy - Plumb Bob chain, Depth Gauge, and Post Puller chain to pull unwanted posts - Tools available Dome Head, Flat Head, Concrete Chisel and Spike tool - Hoses and Couplers Included - Frame thickness 3/4”
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model # Blows per minuteAvg. Foot lbs
Tool Diameter
Max Post Diameter
Weight List Price
PD-1600 (500-900) / (877 Ft lbs) 2.7” 7.125” 1150 lbs $7,095.00PD-1850 (400-800) / (945 Ft lbs) 3.0” 8.250” 1325 lbs $8,495.00PD-1450 (400-700) na 2.5” or 4.5” 300 lbs $4,320.00
- For Skid-Steers
Post Driver Options
Post Driver ToolsTools for a Model PD-1600
Model # Description List PricePD-0005 Dome Head Tool 7.125” $690.00PD-0006 Flat head tool 7.125” $690.00PD-0007 Concrete Chisel Tool $515.00PD-0008 Spike Tool $475.00
Comes standard with a Dome Head Tool
Model # Description List PricePD-0001 Tilt option for model 1600 and 1850 $3,245.00PD-0002 Auger Drive with 4 inch bit $3,150.00
- Tilt and Auger options can be added anytime
- Models 1600 & 1850 come standard with a Dome Head Tool. - Model 1450 choose from 2.5” or 4.5”
Tools for a Model PD-1850
Model # Description List PricePD-0009 Dome Head Tool 8.25” $755.00PD-0010 Flat head tool 8.125” $750.00PD-0011 Concrete Chisel Tool $555.00PD-0012 Spike Tool $515.00
- For Skid-Steers
- Models 1600 & 1850 come standard with a Dome Head Tool. - Model 1450 choose from 2.5” or 4.5”
Adaptors & Extensions -------------- Mounts --------------Skidsteers, Excavators, Backhoes, & Buckets
Planetary Auger Systems
Model EP 6
MODEL EP 15
Model EP 10
$1,571.00
$1,396.00 $1,499.00
Maximum Auger Diameter 36”Hydraulic Flow 15-30 GPMMaximum Hydraulic Pressure 3000PSIMaximum Hydraulic Back Pressure 1500 PSIGearbox Ratio: 3.86:1
SPEEDGPM RPM 15 49 18 59 20 65 24 78 30 98
SPEEDGPM RPM
6 368 4810 6012 7315 91
SPEEDGPM RPM
10 4812 5814 6816 7720 97
TORQUE PSI Ft.-lbs2000 18742500 23423000 2811
TORQUE PSI FT.-lbs
2000 12702500 15873000 1904
TORQUE PSI FT.-lbs
2000 10142500 12673000 1520
H10180138
H10182140
Pg. 27
EP Series
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
2” Hex part # 10181 2 9/16” RD part # 20181Approx. Ship Weight (lbs) 139
2” Hex part # 10182 2 9/16” RD part # 20182Approx. Ship Weight (lbs) 140
2” Hex part # 101802 9/16” RD part # 20180
Approx. Ship Weight (lbs) 138Maximum Auger Diameter 24”Hydraulic Flow 6-15 GPMMaximum Hydraulic Pressure 3000PSIMaximum Hydraulic Back Pressure 1500 PSIGearbox Ratio: 3.86:1
Maximum Auger Diameter 30”Hydraulic Flow 10-20 GPMMaximum Hydraulic Pressure 3000PSIMaximum Hydraulic Back Pressure 1500 PSIGearbox Ratio: 3.86:1
MODEL EP 20 $1,694.00
Maximum Auger Diameter 36”Hydraulic Flow 20-35 GPMMaximum Hydraulic Pressure 3000PSIMaximum Hydraulic Back Pressure 1500 PSIGearbox Ratio: 3.86:1
SPEEDGPM RPM 20 50 26 65 30 75 32 80 35 87
TORQUE PSI Ft.-lbs2000 24652500 30813000 3697
2” Hex part # 20001 2 9/16” RD part # 20184Approx. Ship Weight (lbs) 140
Pg. 28
Heavy Duty Planetary Auger Drives
Hose Kits
- Models 1025, 1530, & 2035 (Larger models are available call for pricing)
- Available in Hex or Round shaft
- 5-year warranty on the Drive unit
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Maximum Auger Diameter 30”Hydraulic Flow 10-25 GPMMaximum Hydraulic Pressure 3000PSIMaximum Hydraulic Back Pressure 1500 PSIGearbox Ratio: 4.08:1
2 9/16” Rd. part # 100102” Hex part # 10011Approx. Ship Weight (lbs) 154
Model 1025
SPEEDGPM RPM 10 39 14 55 18 70 20 78 25 98
TORQUE PSI Ft.-lbs2000 15692500 19623000 2354
$1,956.00
Maximum Auger Diameter 36”Hydraulic Flow 15-30 GPMMaximum Hydraulic Pressure 3000PSIMaximum Hydraulic Back Pressure 1500 PSIGearbox Ratio: 4.08:1
2 9/16” Rd. part # 100152” Hex part # 10016Approx. Ship Weight (lbs) 157
Model 1530
SPEEDGPM RPM 15 45 20 60 25 75 30 90
TORQUE PSI Ft.-lbs2000 20452500 25573000 3068
$2,096.00
Maximum Auger Diameter 36”Hydraulic Flow 20-35 GPMMaximum Hydraulic Pressure 3000PSIMaximum Hydraulic Back Pressure 1500 PSIGearbox Ratio: 4.08:1
2 9/16” Rd. part # 100202” Hex part # 10021Approx. Ship Weight (lbs) 160
Model 2035
SPEEDGPM RPM 20 47 25 59 30 71 35 82
TORQUE PSI Ft.-lbs2000 26052500 32583000 3907
$2,307.00
Model Desription Weight List Price10047 Cross Port Relief Valve
( Required for pressures exceeding 3000 PSI)7 lbs $345.00
Hoses are 96” Long with abrasion sleeves3/4” hoses required for GPM of 20 or more
10050 1/2” HOSE KIT with Flat Face Couplers 14 lbs $213.0010051 3/4” HOSE KIT with Flat Face Couplers 19 lbs $295.0010043 1/2” HOSE KIT (includes fittings not Couplers) 9 lbs $140.0010044 3/4” HOSE KIT ( includes fittings not Couplers) 14 lbs $222.00
Auger Bits
Hose Kits
- Models 1025, 1530, & 2035 (Larger models are available call for pricing)
Pg. 29All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Skid-Steer Quick AttachModel Fit List Price10488 ( EP Series) $415.0010499 Models 1025,
1030, 2035$415.00
Add-on MountsModel Mount type List Price10248 Bolt-on Bucket $260.0021354 Weld mount kit $299.00
Mounting Kit includes Knuckle
Mounting Kit includes Knuckle and cradle. The mount attaches the drive unit to skid-steer with the standard SAE quick couplers
Quick Attach Mounting KitsModel Makes &
Models WT List Price
10172 Cat 420D & 420E(pin grabber)
75 $668.00
10173 JCB 208S, 803, 8018 40 $572.00
10174 JD 790 ELC 172 $1,067.00
10175 JD 135C RTS 82 $658.00
20200 JD/35D Mini Ex (wedge) 81 $428.00
20201 JD 50D Mini Ex (wedge) 80 $428.00
20042 Kamatsu PC50MR-2 50 $428.00
20210 Yanmar VIO40/45/50/55 50 $569.00
10176 Yanmar VIO27 & VIO35 ( quick coupler)
45 $579.00
10177 Yanmar VIO40, VIO45, VIO50 & VIO55 ( quick coupler)
50 $579.00
*20007 Kubota KX161-3 & U45 75 $428.00*20008 Kubota C39/45, KX040-
3/71-3/91-3/121-3, U3575 $428.00
*20026 Kubota KX057 & U45 75 $428.00
*20037 Kubota U25 75 $428.00
*20075 Kubota KX141-3 & U15 75 $428.00
20202 Bobcat X-Change 55 $479.00
20258 Takeuchi with TAG style quick couplers TBO 35/135/138/175/180/235/240/280/285/290
43 $740.00
* USA Models only
PN BucketPin Dia.
WT ListPrice
10201 25 mm 42 $265.00
10201 1 inch 42 $265.00
10202 30 mm 42 $265.00
10203 1-1/4 inch 42 $265.00
10204 35 mm 42 $265.00
10204 1 3/8 inch 42 $265.00
10205 1 1/2 inch 42 $265.00
10206 40 mm 42 $265.00
10298 1 5/8 inch 42 $265.0010207 1 3/4 inch 42 $265.0010208 45 mm 42 $265.00
10209 50 mm 42 $265.00
10210 2 inch 42 $265.00
Small Backhoe & Mini-ExcavatorLess Dipperstick pin.For dippersticks widths from 3 1/2” to 8”Bucket pin diameters listed below
TLB (Backhoe) & ExcavatorLess Dipperstick pin.For dippersticks widths up to 13”
PN BucketPin Dia.
WT ListPrice
10296 1 5/8 inch 49 $400.00
10231 1 3/4 inch 49 $400.00
10481 45 mm 51 $400.00
10232 50 mm 51 $400.00
10233 55 mm 48 $400.00
Welded Mount with fixed width
50 $505.00Many other mount available call for pricing
Pg. 30 All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Fabricated AugersLight to Moderate Ground Conditions
DIA. List Price
NO of teeth
Appox Weight
2” HexPN
2 9/16” RD. PN.
2” RD.PN
4” $232.00 0 42 10600 10601 106026” $248.00 2 44 10603 10604 106058” $357.00 2 76 10606 10607 106089” $370.00 3 85 10609 10610 1061110” $408.00 3 100 10612 10613 1061412” $422.00 4 113 10615 10616 10617
15” $584.00 5 132 10618 10619 10620
16” $604.00 5 136 10621 10622 10623
18” $681.00 6 168 10624 10625 10626
20” $843.00 6 182 10627 10628 10629
24” $876.00 8 210 10630 10631 1063230” $1,122.00 9 278 10633 10634 1063536” $1,427.00 11 372 10636 10637 10638
• Fabricated Boring Head• Hardened Bolt-on Teeth - Std. Incl.
- Gage Teeth in Outside Positions - Wisdom Teeth in Inside Positions
• Hardened Fishtail Point.• Heavy Duty Double Flighting• 2” Hex, 2 9/16” Rd., and 2” Rd.
Collars availavble.• 4’ Standard Length - 3’,5’,and 6’
Lengths are available
“Fab”Auger Bits
• Fabricated Boring Head• Hardened Bolt-on Teeth - Std. Incl.
- Gage Teeth in Outside Positions - Wisdom Teeth in Inside Positions
• Hardened Fishtail Point.• Heavy Duty Double Flighting• 2” Hex, 2 9/16” Rd., and 2” Rd.
Collars availavble.• 4’ Standard Length.
• Cast Steel Boring Head• Hardened Bolt-on Teeth - Std. Incl.
- Gage Teeth in Outside Positions - Chisel Teeth in Inside Positions
• Hardened Fishtail Point.• Heavy Duty Double Flighting• 2” Hex, 2 9/16” Rd., and 2” Rd.
Collars available.• 4’ Standard Length - 3’,5’,and 6’ Lengths
are available
“Tree”Auger Bits
“Cast”Auger Bits
Tree AugersTree and Shrub Planting
DIA. List Price
NO of teeth
Appox Weight
2” HexPN
2 9/16” RD. PN.
2” RD.PN
18”-9” $637.00 7 129 10639 10640 1064124”-12” $844.00 10 186 10642 10643 1064430”-15” $1,051.00 11 230 10645 10646 1064736”-18” $1,263.00 13 305 10648 10649 10650
Cast Head AugersDifficult Ground Conditions
DIA. List Price
NO of teeth
Appox Weight
2” HexPN
2 9/16” RD. PN.
2” RD.PN
6” $376.00 2 48 10657 10658 106598” $540.00 4 83 10660 10661 106629” $584.00 4 89 10663 10664 1066510” $604.00 4 102 10666 10667 1066812” $623.00 4 117 10669 10670 10671
15” $784.00 6 139 10672 10673 10674
16” $841.00 6 148 10675 10676 10677
18” $924.00 6 168 10678 10679 10680
20” $1,287.00 6 231 10681 10682 10683
24” $1,498.00 8 272 10684 10685 1068630” $1,695.00 10 310 10687 10688 1068936” $1,924.00 12 376 10690 10691 1069242” $2,759.00 16 460 10693 10694 1069548” $3,216.00 18 550 10696 10697 10698
Fishtail Point Point for 4” Auger Gage Tooth Wisdom Tooth Chisel ToothDirt PN 10331 - $28.00 PN 10333 - $52.00 PN 10340 - $4.50 PN 10337 - $4.50 PN 10342 - $4.50Hardfaced PN 10332 - $61.00 PN 10334 - $90.00 PN 10341 - $9.55 PN 10338 - $79.55 PN 10343 - $10.50Carbide PN 10335 - $148.00 PN 10336 - $167.00 PN 10339 - $26.10 PN 10344 - $19.50
“Auger Teeth
• Fabricated Boring Head• Hardened Bolt-on Teeth - Std. Incl.
- Gage Teeth in Outside Positions - Wisdom Teeth in Inside Positions
• Hardened Fishtail Point.• Heavy Duty Double Flighting• 2” Hex, 2 9/16” Rd., and 2” Rd.
Collars availavble.• 4’ Standard Length.
Pg. 31All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Bullet Rock AugersRock, Aspahlt, and Frozen Ground
DIA. List Price
NO of teeth
Appox Weight
2” HexPN
2 9/16” RD. PN.
2” RD.PN
4.5” $850.00 4 70 10700 10701 107026” $1,273.00 6 76 10703 10704 107057” $1,311.00 8 80 10706 10707 107088” $1,441.00 8 87 10709 10710 107119” $1,462.00 8 102 10712 10713 1071410” $1,500.00 10 105 10715 10716 10717
12” $1,644.00 12 134 10718 10719 10720
15” $1,890.00 15 171 10740 10741 10742
18” $2,072.00 18 208 10727 10728 10729
24” $2,469.00 22 291 10730 10731 1073230” $2,729.00 24 340 10733 10734 1073536” $3,092.00 30 395 10736 10737 10738
Bullet Rock PointPN 10758List Price = $370.00
Bullet Rock ToothPN 10759List Price = $19.50
Wobble AugersDirtless Diggings Solution
DIA. List Price
Appox Weight
2” HexPN
2 9/16” RD. PN.
2” RD.PN
4” $314.00 70 10700 10701 107026” $397.00 76 10703 10704 107059” $606.00 80 10706 10707 10708
• No loss Dirt at the bottom of the hole
• No dirt to remove around the top of the hole
• Compact hole and ready for concrete
Variable Length Extensions Fixed Length Extensions
Fixed length auger extensions extend the auger’s digging depth by the length of the extension
Variable length auger extensions store inside the column of 10” diameter or larger auger bits. Extension incre-ments are every 6” on 12” - 24” auger extensions and every 12” on 48” - 72” extensions.
Length Shaft size PN Weight List Price
24” Long Variable 2” Hex 10900 32 $217.0048” Long Variable 2” Hex 10901 56 $299.0072” Long Variable 2” Hex 10902 84 $389.00
12” Long Variable 2 9/16” Rd. 10903 22 $159.0024” Long Variable 2 9/16” Rd. 10904 32 $222.0048” Long Variable 2 9/16” Rd. 10905 56 $308.00
72” Long Variable 2 9/16” Rd. 10906 84 $409.00
Length Shaft size PN Weight List Price
12” Long Fixed 2” Hex 10910 20 $157.0024” Long Fixed 2” Hex 10911 32 $191.0048” Long Fixed 2” Hex 10912 56 $268.0072” Long Fixed 2” Hex 10913 84 $351.00
12” Long Fixed 2 9/16” Rd. 10914 22 $157.0024” Long Fixed 2 9/16” Rd. 10915 32 $191.0048” Long Fixed 2 9/16” Rd. 10916 56 $268.00
72” Long Fixed 2 9/16” Rd. 10917 84 $370.00
Part # Drive Unit Auger Collar List Price
10921 2” Hex To 2 9/16” Rd. $216.0010922 2” Hex To 2” Rd. $199.0010923 2 9/16” Rd. To 2” Hex $131.0010924 2 9/16” Rd. To 2” Rd. $138.0010925 2 9/16” Rd. To 2” Hex $118.0010926 2 9/16” Rd. To 2 9/16” Rd. $131.00
Adapters
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
The industry standard. Operates with hydraulic flows between 10 and 15 GPM. The trencher is available in 2 to 4 ft. digging depths and 6- to 12-in. trench widths.
50 percent more powerful than the HXR-14. Operates between 16 and 20 GPM . The trencher is available in 2- to 5-ft. digging depths and 6- to 12-in. trench widths.
1. Match the trencher model with your machines GPM 4. Choose an optional Trench Cleaner 2. Choose a mount and side shift options 5. Pick the desired chain type , depth, and width3. Hose kit
This basic, economical trencher operates with hydraulic flows be-tween 8 and 20 GPM. The Model HXR-7 works very well with the walk-behind mini-loaders.
Almost 70 percent more powerful than the HXR-14. Operates with hydraulic flows between 19 and 25 GPM. The trencher is available in 2- to 5-ft. digging depths and 6- to 12-in. trench widths.
For loaders with larger hydraulic systems. Designed for hydrau-lic systems between 25 and 40+ GPM. The trencher is available in 2- to 5-ft. digging depths and 6- to 12-in. trench widths.
HXR-7 HXR-14 HXR 21
HXR-25 HXR-35
Pricing a Trencher
Pg. 32 All prices and specifications subject to change without notice. (Printed 01-15-2019)
Model Description List PriceH57-uni Universal Steer-Steer Mount with Manual Side Shift $420.00H57-uniHyd Universal Steer-Steer Mount with Hydraulic Side Shift $1,350.00H57-uniF Universal Steer-Steer Mount ( Fixed no side shift) $140.00
Trencher Mount and side shift
Model Description List PriceHKX-100 1/2” Hose Kit with Flat Face couplers ( rated to 25 gpm ) $190.00
Additional Charge for High Flow Hose Kits. Call for details
Hose Kits
Trencher Cleaner - OptionalModel Description List PriceHTC Trench Cleaner to fit Haugen Trenchers $320.00
Rock & Frost ABFRecommended for frost and rocky conditions, rock & frost teeth only, 6 & 8-inch trench widths.
Single StandardRecommended for loose, damp soil conditions. Half the tooth stations as the double standard digging chain, cupped teeth only.
Double Standard ABFRecommended for harder drier soil, roughly twice the number of teeth as single standard, cupped teeth only.
1/2 Rock & Frost ABF Recommended for harder soil and rocky conditions, alternating cupped and rock & frost teeth, 6 & 8-inchtrench widths.
TerminatorRecommended for hard, dry digging conditions. 5 and 6 inch trench widths are available.
Chain Style
Expanded Double Standard 8, 10, & 12-inch widths, cupped teeth only.
Pg. 33All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Digging Depth & Width XR 7 XR 14 XR 21 XR 25 XR 3524x4 Single Std. 3,650.0024x6 Single Std. 3,810.00 4,370.00 4,680.00 4,770.00 5,880.0024x8 Single Std. 3,890.00 4,565.00 4,940.00 5,02000 6,095.0024x10 Single Std. 4,645.00 5,020.00 5,095.00 6,165.0024x12 Single Std. 4,695.00 5,070.00 5,150.00 6,205.0036x4 Single Std. 3,815.0036x6 Single Std. 3,975.00 4,540.00 4,870.00 4,950.00 6,035.0036x8 Single Std. 4,750.00 5,120.00 5,200.00 6,250.0036x10 Single Std. 4,825.00 5,200.00 5,270.00 6,315.0036x12 Single Std. 4,630.00 5,245.00 5,335.00 6,365.0042x6 Single Std. 4,660.00 5,050.00 5,125.00 6,195.0042x8 Single Std. 5,295.00 5,375.00 6,415.0048x6 Single Std. 4,720.00 5,190.00 5,270.00 6,310.0048x8 Single Std. 5,445.00 5,525.00 6,530.0060x6 Single Std 5,680.00 5,760.00 6,735.0024x4 Double Std. ABF 3,780.0024x6 Double Std. ABF 4,010.00 4,515.00 4,825.00 4,905.00 5,995.0024x8 Double Std. ABF 4,110.00 4,825.00 5,075.00 5,160.00 6,270.0024x10 Double Std. ABF 4,925.00 5,160.00 5,235.00 6,285.0024x12 Double Std. ABF 5,030.00 5,205.00 5,290.00 6,320.0030x4 Double Std. ABF 3,970.0030x6 Double Std. ABF 4,160.0036x4 Double Std. ABF 3,995.0036x6 Double Std. ABF 4,255.00 4,740.00 5,070.00 5,155.00 6,215.0036x8 Double Std. ABF 5,030.00 5,320.00 5,405.00 6,425.0036x10 Double Std. ABF 5,155.00 5,440.00 5,480.00 6,495.0036x12 Double Std. ABF 5,270.00 5,450.00 5,535.00 6,540.0042x6 Double Std. ABF 4,860.00 5,265.00 5,345.00 6,380.0042x8 Double Std. ABF 5,510.00 5,605.00 6,600.0048x6 Double Std. ABF 4,965.00 5,410.00 5,485.00 6,495.0048x8 Double Std. ABF 5,665.00 5,745.00 6,725.0060x6 Double Std. ABF 5,895.00 5,985.00 6,935.0024x6 1/2 Rock & Frost 4,920.00 5,230.00 5,300.00 6,295.0024x8 1/2 Rock & Frost 5,390.00 5,475.00 6,500.0036x6 1/2 Rock & Frost 5,340.00 5,720.00 5,795.00 6,790.0036x8 1/2 Rock & Frost 5,880.00 5,955.00 6,925.0042x6 1/2 Rock & Frost 5,540.00 5,970.00 6,055.00 7,020.0042x8 1/2 Rock & Frost 6,140.00 6,230.00 7,155.0048x6 1/2 Rock & Frost 5,725.00 6,170.00 6,260.00 7,180.0048x8 1/2 Rock & Frost 6,340.00 6,425.00 7,325.0060x6 1/2 Rock & Frost 7,740.0024x6 Full Rock & Frost 5,390.00 5,820.00 5,905.00 6,875.0024x8 Full Rock & Frost 5,895.00 5,980.00 6,940.0036x5 Full Rock & Frost 5,880.00 6,275.00 6,345.00 7,265.0036x6 Full Rock & Frost 5,895.00 6,310.00 6,400.00 7,305.0036x8 Full Rock & Frost 6,390.00 6,470.00 7,365.0042x5 Full Rock & Frost 6,150.00 6,661.00 6,695.00 7,560.0042x6 Full Rock & Frost 6,170.00 6,645.00 6,720.00 7,585.0042x8 Full Rock & Frost 6,720.00 6,810.00 7,660.0048x5 Full Rock & Frost 6,440.00 6,870.00 6,955.00 7,780.0048x6 Full Rock & Frost 6,445.00 6,885.00 6,985.00 7,795.0048x8 Full Rock & Frost 6,970.00 7,055.00 7,875.0024x4 Terminator 4,315.0024x6 Terminator 4,610.00 5,525.00 5,825.00 5,910.00 6,875.0036x4 Terminator 4,945.0036x5 Terminator 5,850.00 6,140.00 6,230.00 7,145.0036x6 Terminator 5,850.00 6,140.00 6,230.00 7,145.0042x6 Terminator 6,130.00 6,715.00 6,805.00 7,650.0048x5 Terminator 6,505.00 6,975.00 7,065.00 7,875.0048x6 Terminator 6,505.00 6,975.00 7,065.00 7,875.00
Pg. 34 All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model Cutting Width
Cutting Depth
Minimum Motor Size Fan Size Weight List Price
550 66 inches 25 inches 4.9 cu. Ft. 17 inches 690 lbs $6,625.00600L 74 inches 27 inches 6.2 cu. Ft. 19 inches 742 lbs $7,235.00700 84 inches 38 inches 9.9 cu. Ft 21 inches 1190 lbs $7,809.00
Hydraulic Motor - ( Must choose one )
Part # Description Recommended GPM List Price320-1-0090 4.0 CU. IN/REV HYD. Drive Kit 10-13 GPM Included320-1-0100 4.9 CU. IN/REV HYD. Drive Kit 13-16 GPM Included
320-1-0101 6.2 CU. IN/REV HYD. Drive Kit 16-20 GPM Included320-1-0102 8.0 CU. IN/REV HYD. Drive Kit 20-24 GPM Included320-1-0114 9.9 CU. IN/REV HYD. Drive Kit 24-31 GPM $445.00320-1-0115 11.9 CU. IN/REV HYD. Drive Kit 31-40 GPM $545.00
Chute Rotation Options ( Must choose one )
Part # Chute Rotation Options List Price320-1-0106
320-2-1131320-2-1132
Hydraulic chute and deflector Requires one hydraulic circuit. Includes hydraulic valve block, hydraulic chute motor, hydraulic deflector cylinder, Electric wiring kit and re-mote control box installed in the cab. Includes 2 (5) foot hoses and Flat Face CouplersOptional 8 pin wire harnessOptional 14 pin wire harness
$2,250.00
$240.00$240.00
320-1-0107 Electric Chute Rotation and Manual Adjust Deflector. Includes the electric motor, wirnig kits, and Hoses and couplers. *8 or 14 pin wiire harnesses are not available
$1,197.00
Skid-Steer Mount4 Blade Fan, bolt-on replaceable cutting edge, 5/16” flighting with 14” auger on the 550 and 600L, 18” auger with heavy duty 4” tube on the 700, Replaceable skid shoes. # 60 roller chain.
Snow Blowers
Model Cutting Width
Cutting Depth
Flow Requirement Weight List
PriceSBH 78 78 inches 27 inches 11-40 gpm 650 lbs $9,525.00
320-2-1131320-2-1132
Optional 8 pin wire harnessOptional 14 pin wire harness
$275.00$275.00
HydroMax
Pg. 35All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model Cutting Width
Cutting Depth
RecommendedHorsepower Fan Size Weight List Price
550 66 inches 25 inches 25-50 HP 17 inches 690 lbs $6,625.00600L 74 inches 27 inches 40-75 HP 19 inches 742 lbs $7,235.00600 74 inches 38 inches 50-90 HP 21 inches 1130 lbs $7,350.00700 84 inches 38 inches 75-125 HP 21 inches 1190 lbs $7,809.00
Chute Rotation Options - ( Must choose one )
Part # Description List Price320-1-0112 Hydraulic Chute and Deflector - Requires 2 hydraulic circuits. Includes Chute hy-
draulic motor, Deflector cylinder and 2-7ft (CM) hoses with Pioneer couplers.$650.00
320-1-0113 Hydrualic Chute and Manual adjust deflector - Requires 1 Hydraulic circuit. Includes Chute Hydraulic motor & 1-7f(cm) hose with pioneer couplers
$432.00
320-1-0116 Electric Chute and Manual adjust Deflector - Includes 12 volt Electric motor and electrical hookups to the tractor
$598.00
Three Point Snow Blowers540 PRM Category 1 & 2
Model Cutting Width
Cutting Depth
RecommendedHorsepower Fan Size Weight List Price
800 96 inches 44 inches 90 -150 HP 34” x 12” 1830 lbs $13,180.00900 108 inches 44 inches 125-200 HP 34” x 12” 1930 lbs $13,700.001000 120 inches 44 inches 125-200 HP 34” x 12” 2300 lbs $14,250.00
Hydraulic Chute and Deflector are Standard
Part # Description List Price320-1-0141 1000 PTO Drive Kit 1- 3/8” DIA, 21 Spline Included320-1-0142 1000 PTO Drive Kit 1- 3/4” DIA, 20 Spline Included
Three Point Snow Blowers1000 PRM Category 2 & 3
Pg. 36
TACH-ALL Quick Attach for Tractor Loaders
- Makes Tractor loaders compatible with universal mount Skid-Steer Attachments
Heavy-Duty Model
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Yanmar / Cub Cadet / WoodsModel Fit Loader Model List Price.QA-CC1 Cub Cadet 476 & Woods 1009 $895.00
QA-CC2 Cub Cadet 417 & Woods 165 $923.00
QA-CC3 Cub Cadet 833 $943.00
QA-YA1 Cub Cadet Yanmar CL 300 ( 1 1/4” pins) $893.00QA-YA2 Cub Cadet Yanmar CL 300 ( 1” pins) $893.00QA_YA3 Yanmar YFL-1575 $1,059.00QA_YA4 Yanmar YL-300 Pin Type $1,049.00
QA_YA5 Yanmar 210 4-Pin Type $952.00
Bush HogModel Fit Loader Model List Price.QA-BH1 Bush Hog 2240, 2245, 2246 & 2247 $1,043.00
QA-BH2 Bush Hog 2425, 2400, 2440, 2440QT & 2445 $1,044.00QA-BH3 Bush Hog 2840, 2845, 3425, & 3450 $1,885.00QA-BH4 Bush Hog M300, M346, M446 & M546 $1,640.00
John DeereModel Fit Loader Model List Price.QA-ALO John Deere Global Carrier Only (JD QA Conversion Plate) $1,355.00
QA-JD1 John Deere 80 Pin-Type & 440 Pin Type $947.00
QA-JD2John Deere 300, 300X, 300CX, 305, 400X, 400CX, 419, 420, 430, 440QA, 460, D160, H120, H130, H160, H165 & H180 ( JD Conversion Plate)
$949.00
QA-JD3 John Deere 510, 512, 520, 521, 522, 540, 541, & 542 ( JD Conversion Plate) $1,123.00
QA-JD4 John Deere 145, 146, 148 & 158 Pin Type $1,590.00QA-JD5 John Deere 70 & 70A Pin Type (Includes Pins) $1,056.00
QA-JD6 * John Deere 620, 640, 720, 721, 725, 726, 740, 741, & 746 (JD conversion plate) $1,811.00
* Requires JD Latch kit # BW15457 or ATI Corporation’s Kit $454.00
QA-JD7 John Deere 245, 260, & 265 Tractor Loader ( JD conversion Plate) $1,610.00
QA-JD8 John Deere 840 (JD Conversion Plate) $1,905.00QA-JD9 John Deere 48 Pin Type $1,860.00QA-JD10 John Deere 100 & 175 Pin Type $1,628.00QA-JD11 John Deere 75 Pin-Type $949.00QA-JD12 John Deere 244J & 304J (JD QA Conversion Plate) $2,106.00QA-JD13 John Deere 240 & 245 (Direct Pin) Tractor Loader $2,041.00QA-JD14 John Deere 35, 36, 36A & 47 Pin type $1,639.00
Great BendModel Fit Loader Model List Price.QA-GB1 Great Bend 240, 260, $ 280 $990.00
QA-GB2 Great Bend 330 $996.00
QA-GB3 Great Bend 440 Pin Type $1,124.00
QA-GB5 Great Bend 570 Pin Type $1,715.00
KiotiModel Fit Loader Model List Price.QA-KM1 Kioti KL1450 & KL1470 $910.00
QA-KM2 Kioti KL120 & KL130 $941.00
QA-KM3 Kioti KL1231 $975.00
QA-KM4 Kioti KL2510 $1,024.00
KubotaModel Fit Loader Model List Price.
QA-KU1
Kubota LA401, LA402, LA452, LA480, LA481, LA482, LA680, LA681, LA682, LB402, LB552, & LB702(Kubota BF500, BF550, LA450, LA500, & LA650 Requires 4 of Kubota # 75545-58710 )
$947.00
QA-KU4 Kubota TL720 $1,018.00
PK-KU4 Pin Kit for QA-KU4 & QA-KU9 ( Optional ) $104.00
QA-KU5Kubota LA950A, LA1001, LA1002 & LA1150A ( Kubota BF800, BF900, BF1100, LA950, LA1100 & LA1150 Requires 4 of Kubota #75567-58710)
$993.00
QA-KU6 Kubota TL420 & TL421 $967.00QA-KU7 Kubota LA1251 Pin-Type $1,125.00QA-KU8 Kubota TL1150 & LA1162 $1,327.00QA-KU9 Kubota LA852 $978.00QA-KU10 Kubota M1000 $1,033.00QA-KU11 Kubota LA463 & LA513 $987.00QA-KU12 Kubota LA723 $999.00QA-KU13 Kubota LA853 $1,078.00
QA-KU14 Kubota LA1301, LA1601 & LA1251 w/Kubota QA ( Conversion Plate ) $1,742.00
QA-KU15 Kubota LA403 $986.00QA-KU16 Kubota LA703 $967.00QA-KU17 Kubota LA434, LA504, & LA534 $1,006.00QA-KU18 Kubota LA1153, LA1353 Pin Type, LA1150 $ LA1403 $1,679.00QA-KX080 Kubota KX080-3 w/Kubota QA $1,850.00QA-KX121 Kubota KX121-3, KX91-3 & U35 w/Kubota QA $1,734.00
QA-KX161 Kubota KX161-3 Mini Excavator & U45 w/Kubota QA (Conversion Plate) $1,734.00
QA-U55 Kubota U55 & KXO57-4 w/Kubota QA $1,886.00
Massey Ferguson / AGCO / ChallengerModel Fit Loader Model List Price.QA-MF1 Massey Ferguson L100, 1246, 1466, AGCO SL46,
Challenger LM30, TYM TL100 & TL200 $967.00
QA-MF2 Massey Ferguson 232, 236, 832, 838, 932, 1032, 1040, 1050, AGCO 656, 680 & Challenger ML40 $1,058.00
QA-MF3 Massey Ferguson 1244, 1464, 1520, AGCO SL44 & Challenger ML20 & L90 $955.00
QA-MF4 Massey Ferguson L200, L210, DL130, DL250, DL260, 1055, 1530 & AGCO SL48A $1,601.00
QA-MF5 Massey Ferguson 1036, 1038, 1048, 1056, AGCO 780, 782, 784, 880 & 884 $1,719.00
QA-MF6 Massey Ferguson 1525, DL120, AGCO SL46A $1,172.00
QA-AC1 Allis Chalmers 400, 450, 460 & 500 $1,557.00
QA-FO20 Massey Ferguson DL95, L100E, New Holland 235 TL, & Alo Quicke 140 $938.00
Pg. 37
TACH-ALL Quick Attach for Tractor Loaders
SLOPE-TACH for Skid-Steer Loaders- Slopes attachments up to 17 degrees in either direction.- Cut grades, ditches or swales with a Skid-Steer.- Dual cylinders provide smooth operation and greater tilting force.
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
KiotiModel Fit Loader Model List Price.QA-KM1 Kioti KL1450 & KL1470 $910.00
QA-KM2 Kioti KL120 & KL130 $941.00
QA-KM3 Kioti KL1231 $975.00
QA-KM4 Kioti KL2510 $1.024.00
New Holland / Case IHModel Fit Loader Model List Price.QA-ALO New Holland 810TL, 830TL & 840TL
Case IH LX720, LX730, LX740 & LX750 (Euro-Style QA) $1,355.00
QA-FO1 New Holland 7108, 7308 & Case IH L130, 110TL $962.00
QA-FO2 New Holland 2109, 620TL, 7109, 7209, 7210, 7309, 7310 & 7410 $1,162.00
QA-FO3New Holland 14LA, 15LA, 16LA, 17LA, 18LA, 250TL, 260TL & 270TL Case IH L160, LX114, LX116 & LX118
$1,229.00
QA-FO4 Ford 770, 770A & 770B $975.00
QA-FO5 Ford 345C & 345D $1,593.00
QA-FO6 Ford 445C, 445D, 545C & 545D $1,598.00
QA-FO7 Ford 712, 720, 725, 730 & 735 Loaders $1,587.00
QA-FO8 Ford 740 Loader $1,610.00
QA-FO9 Ford 771, Kubota 1500, Schwartz 1200HD, 1350 & 1450 $1.058.00
QA-FO10 Ford 776A, 776B, 777B, 777D & 777E $1,646.00
QA-FO11 Ford 745 (Direct Pin) $1,610.00
QA-FO12 Ford 772, Schwartz 1300 & 1400 $1,528.00
QA-FO13 New Holland 7614 (TV140) ( QA Conversion Plate) $1,846.00
QA-FO14 Ford 445, 445A, 545 & 545A (4-Bar Linkage) $1,625.00
QA-FO15 Ford 744 loader $1,643.00
QA-FO16 Ford 776F ( 1-1/4” Pin Diameter) $1,663.00
QA-FO17 Ford 32LA & 33LA $1,650.00
QA-FO18 New Holland 32LC, 52LC, CaseIH LX232 & LX252 $1,650.00
QA-FO19 New Holland 32LA, 33LA & 52LA (4-Bar Linkage) $1,650.00
QA-FO20 New Holland 235TL, ALO Quicke 140 & Massey Ferguson DL95 & L100E $938.00
QA-FO21 Ford 7411, 7412, 7412HD, 7413 & 7511 Pin Type $1,645.00
QA-FO22 Ford 445, 445A & 545A Direct Pin $1,587.00
QA-CA1 Case IH 2250 & 2255 $1,082.00
QA-CA2 Case IH 2050 $999.00
QA-CA3 Case IH 2000 $1,176.00
QA-CA4 Case IH 10QA & L108 (Pins Included) $1,087.00
QA-CA5 Case IH 1850 & 2200 $1,559.00QA-CA6 Case IH 510, 520 & L300 Pin-Type $1,528.00QA-CA7 Case 56L, 60L, 66L & 74L $1,559.00QA-CA8 Case 54L $1,518.00QA-CA9 Case 96L $1,559.00QA-CA10 Case IH 2355 & 2455 $1,715.00
QA-CA11 Case IH L400, L450, L500, L550, L600, L650, L700 & L750New Holland LX156, LX162, & LX172 (QA Conversion Plate) $1,598.00
QA-QU1Case IH L720, L725, L730,, L735, L745, L755 & L770New Holland 810TL, 815TL, 820TL, 825TL, 835TL, 840TL, 845TL 850TL & 860TL
$1,505.00
MISCModel Fit Loader Model List Price.QA-ALO Alo/Quicke Euro/John Deere Global Quick Attach,
Conversion Plate $1,355.00
QA-BC1 Bobcat 7TL $1,078.00
QA-HA1 Hardy 25, 35, 40ST, 40DL, 50ST & 50DL $1,150.00
QA-HA2 Hardy 60ST, 60DL, 70ST, 70DL, 90DL, 120ST, 120DL 130ST & 130DL $1,622.00
QA-HD Blank Frame, Heavy Duty w / o mounting Brackets $1,158.00
QA-ML2 Mahindra ML205 & 26L $953.00
QA-WD3 Woods Dual 3100 & 3150 $1,649.00QA-WD4 Woods Dual 215 Pin-Type $1,711.00
QA-QU2 Quicke Q710, Q720, Q730, Q740, Q750, Q760, Q910, Q920, Q930, Q940, & Q950 $1,505.00
Mini Skid-SteersModel Fit Loader Model List Price.QA-CTC Compact Tool Carrier Quick Attach conversion plate for
Toro, Ditch Witch & Boxer $990.00
Model Description Weight List Price.QA-ST2 Slope Tach universal Skid-Steer mount 415 lbs $4,180.00
EURO-TACH
Convert your Euro coupler to a Skid-Steer mount or
many other tractor mounts
EURO-TACHModel Fit Loader Model List Price.ET-UN1 Universal Skid-Steer Mount Conversion Plate $1,082.00
Call for other mounts
Pg. 38
Compact Tractor Dirt Buckets
Optional Grapple
Compact Tractor Rod Bucket
Optional Grapple
Bolt-on Grapples For Compact Tractors
Model Pictured HCBOG-C
Measure to check your buckets Compatibility - The A measurement is the grapple reach.- The B measurement is the Bucket height.
All prices and specifications subject to change without notice. (Printed 10-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
A.__
B.__
---------------------------
Model Grapple Reach Average Grapple opening
Grapple Width Weight List Price
HGK 48-73 12” 12” over bucket height 30” 137 lbs $1,623.00HCBOG 24” 22” over bucket height 49.5” 175 lbs $1,330.00
Model Bucket Width Bucket Depth Bucket Height Weight List PriceHCDB 60 60” 27” 22” 345 lbs $966.00HCDB 66 66” 27” 22” 375 lbs $1,005.00HCDB 72 72” 27” 22” 405 lbs $1,035.00HCDB 84 84” 27” 22” 440 lbs $1,145.00
Model Grapple Opening Grapple Width Weight List PriceHCBOG 45.5” 49.5” 175 lbs $1,330.00
Model Bucket Width Bucket Depth Bucket Height Weight List PriceHCRB 60 60” 27” 23.5” 320 lbs $1,140.00
Model Grapple Opening Grapple Width Weight List PriceHCBOG 45.5” 49.5” 175 lbs $1,330.00
B.__
Shown in its vertical cutting
position(Optional Rotation)
- Cuts up to a 12” tree- Two cutting positions to maximize versatility- High back rest to protect the operator- Industrial 5” x 12” cylinder- Requires 18-30 gpm
Tree Shear
Pg. 39
This industrial grade brush cutter is designed for the serious user. Cut 3” trees without hesitation or mow a field without plugging up. Ultra-Heavy Duty construction
- Stump Jumper - 1/4” reinforced deck - Hoses and Couplers Included - Ultra Rugged Construction
Brush Mowers
- For Skid-Steers
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model # Blades Width Weight List PriceHBME 60 2 60” 1250 lbs $6,200.00HBME 72 2 72” 1450 lbs $6,950.00
Model # Rotation Shearing Capacity Weight List Price
HTSF-12 Fixed 12 inches 870 lbs $5,355.00HTS-12 Manual Rotation 12 inches 870 lbs $6,450.00HTSH-12 Hydraulic Rotation 12 inches 890 lbs $8,250.00
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Carpet Poles - Carpet poles for Skid-Steer Loaders- Available in 2.50”, and 3” diameter- Heavy Duty Skid-Steer Plate- Built-in roll back
Fertilizer Buckets - Large capacity Fertilizer Buckets for articulating loaders with Skid-Steer mounts.- Heavy Duty 3/8” thick quick attach plates- 1/2” x 3” wear bars- High carbon side stiffners- 3/4” x 6” Cutting Edge predrilled for bolt-on edges
Model Description Bucket Height
Overall Depth
Struck Capacity
Heaped Capacity List Price
HFB 60 60” Fertilizer Bucket 38” 39” 0.83 cu. yd. 1.10 cu. yd. $2,260.00
HFB 66 66” Fertilizer Bucket 38” 39” 0.99 cu. yd. 1.24 cu. yd. $2,350.00
HFB 72 72” Fertilizer Bucket 38” 39” 1.07 cu. yd. 1.39 cu. yd. $2,450.00HFB 84 84” Fertilizer Bucket 38” 39” 1.22 cu. yd. 1.58 cu. yd. $2,695.00HFB 102 102” Fertilizer Bucket 38” 39” 1.45 cu. yd. 1.81 cu. yd. $3,070.00
Optional Bolt-on Edges - 3/4 x 8” Double Bevel holes 8” on centerTBOE 60 60” Bolt-on Cutting edge $290.00TBOE 66 66” Bolt-on Cutting edge $320.00TBOE 72 72” Bolt-on Cutting edge $345.00TBOE 84 84” Bolt-on Cutting edge $399.00TBOE 102 102” Bolt-on Cutting Edge $499.00
“These models are designed specifically for the Wacker Articulating loaders”
Model Pole Diameter
Pole Length
Pole Material
Pole Tip
1/2 Pole Length
Total Cap(PLF) List Price
MCP 72-25 SKD 2.50 inches 6 feet 1144 SR 1500 lbs 3000 lbs 500 lbs $1,425.00
MCP 144-25 SKD 2.50 inches 12 feet 1144 SR 700 lbs 1400 lbs 110.lbs $1,495.00
MCP 72-30 SKD 3 inches 6 feet 1144 SR 2600 lbs 5000 lbs 860 lbs $1,765.00MCP 144-30 SKD 3 inches 12 feet 1144 SR 1200 lbs 2400 lbs 200 lbs $1,815.00
All prices and specifications subject to change without notice. (Printed 01-15-2019)Pg. 40
Pg. 41
Fertilizer Buckets “This model is designed specifically for the Cat 906, 907, 908 Articulating loaders and John
Deere 244 loaders”
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model Description Bucket Height
Overall Depth
Struck Capacity
Heaped Capacity List Price
HWL-FB 72 72” High Capacity Fertilizer Bucket 40” 53” 2.10 cu. yd. 2.40 cu. yd. $2,899.00
HWL-FB 84 84” High Capacity Fertilizer Bucket 40” 53” 2.50 cu. yd. 2.80 cu. yd. $3,099.00
HWL-FB 96 96” High Capacity Fertilizer Bucket 40” 53” 2.80 cu. yd. 3.10 cu. yd. $3,295.00HWL-FB 102 102” High Capacity Fertilizer Bucket 40” 53” 2.95 cu. yd. 3.25 cu. yd. $3,540.00HWL-FB-108 108 High Capacity Fertilizer Bucket 40” 53” 3.10 cu. yd. 3.40 cu. yd. $3,700.00HWL-FB 120 120” High Capacity Fertilizer Bucket 40” 53” 3.25 cu. yd. 3.55 cu. yd. $3,860.00
Optional Bolt-on Edges - 3/4 x 8” Double Bevel holes 8” on centerTBOE 72 72” Bolt-on Cutting edge $345.00TBOE 84 84” Bolt-on Cutting edge $399.00TBOE 96 96” Bolt-on Citting edge $458.00TBOE 102 102” Bolt-on Cutting edge $499.00
TBOE 108 108” Bolt-on Cutting Edge $580.00
TBOE 120 120” Bolt-on Cutting Edge $650.00
Optional Bolt-on GrappleHGR-FB Dual Cylinder indepentent Grapples - Bolts on the Bucket $2,890.00
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Parts Pricing
Convert your attachments to the industry standard Skid-Steer quick attach system
Pg. 42
3-Point Adaptor - Adapts your Skid-Steer to accept 3-Point Attachments- Works on Category 1 and 2
For Skid-Steers
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Available with a window or solid with welding holes
- Add a Euro mount to any Haugen Skid-Steer attachment- 1 piece Euro Quick attach Weld-on plates
Window
Solid
Model Description Weight List PriceMUP 1/4” Quick Attach plate with window 62 lbs $217.00MUPS 1/4” Quick Attach plate solid no holes 70 lbs $229.00MHUP 5/16” Quick Attach plate with window 95 lbs $270.00MHUPS 5/16” Quick Attach plate solid no holes 102 lbs $280.00
All weld on plates are not painted
Model Desription Weight List PriceM3PA Three point adaptor 155 lbs $595.00
Euro Quick Attach Plates
Model Description Weight List PriceMGE-02 Add on the any Haugen Skidsteer
Attachments 58 lbs $90.00
MGE-01 Weld on Plates (2 piece) 70 lbs $225.00MGE-03 Weld on plate (1 piece) 95 lbs $275.00MGE-04 Euro Plate Series 2 ( 1 piece) 115 lbs $560.00
- Add a Euro mount to any Haugen Skid-Steer attachment- 1 piece Euro Quick attach Weld-on plates
Model Desription Weight List PriceM3PA Three point adaptor 155 lbs $595.00
Wide Frame Pallet Forks- Available in class 2 and class 3 set ups- Carriage bars made from high yield Vanadium Steel- Choose different lengths and capacity Fork Tines
Pg. 43
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Tractor Loaders and Small Wheel Loaders with Skid-Steer Quick Attach
Model Description Frame Class Fork Tine List PriceMFR-48-C2 48” Wide Frame Class 2 1.75” x 4 x 48” $2,150.00
MFR-60-C2 60” Wide Frame Class 2 1.75” x 4 x 48” $2,250.00MFR-72-C2 72” Wide Frame Class 2 1.75” x 4 x 48” $2,350.00MFR-78-C2 78” Wide Frame Class 2 1.75” x 4 x 48” $2.550.00MFR-48-C3 48” Wide Frame Class 3 2” x 5” x 48” $3,750.00MFR-60-C3 60” Wide Frame Class 3 2” x 5” x 48” $3,850.00MFR-72-C3 72” Wide Frame Class 3 2” x 5” x 48” $3,950.00MFR-78-C3 78” Wide Frame Class 3 2” x 5” x 48” $4,150.00
Skid-Steer models require a backrest MFR-BR Skid-Steer Back Rest $475.00
Replacement Class 2 Fork Tines Model # Fork Length Fork Size Weight Lift Capacity List PriceMFT 42-5 42” 1.50” x 4” 150 lbs 5000 lbs $415.00MFT 48-5 48” 1.50” x 4” 170 lbs 5000 lbs $435.00MFT 48-6 48” 1.75” x 4” 220 lbs 6000 lbs $510.00MFT 60-6 60” 1.75” x 4” 240 lbs 6000 lbs $695.00MFT 72-6 72” 1.75” x 4” 275 lbs 6000 lbs $725.00
Pg. 44 All prices and specifications subject to change without notice. (Printed 01-15-2019)
Hook over Bucket ForksMade to fit Tractor Loaders, Tractor Loader Backhoes, and Wheel Loaders
Custom Shaft Style Forks available ------ Call for quotes
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Model Tine SizeTxWxL
Back Height
Bucket Opening
Tine Spread
Lift Capacity
# of Brackets
Shaft Size
List Price
H15-42 1 x 3 x 42 24” up to 24” up to 54” 1500 lbs 3 1” $696.00H35-42 1.50 x 3 x 42 48” up to 42” up to 55” 3500 lbs 3 2” $1,050.00
H35-48 1.50 x 3 x 48 48” up to 42” up to 55” 3500 lbs 3 2“ $1,046.00H45-42 1.50 x 4 x 42 48” up to 42” up to 72” 4500 lbs 4 2” $1,110.00H45-48 1.50 x 4 x 48 48” up to 42” up to 72” 4500 lbs 4 2” $1,130.00H60-48S 1.75 x 4 x 48 48” up to 42” up to 72” 6000 lbs 4 2” $1,350.00H60-48 1.75 x 4 x 48 55” up to 51” up to 72” 6000 lbs 4 2” $1,390.00H80-48S 2 x 4 x 48 48” up to 42” up to 72” 8000 lbs 4 2” $1,549.00H80-48 2 x 4 x 48 66” up to 60” up to 72” 8000 lbs 4 2” $1,660.00H100-48 2 x 5 x 48 74” up to 69” up to 72” 10000 lbs 5 2” $2,172.00H100-72 2 x 5 x 72 74” up to 69” up to 72” 10000 lbs 5 2” $2,570.00H180-60 2.50 x 6 x 60 74” up to 69” up to 72” 18000 lbs 5 2” $3,150.00H280-72 2.50 x 8 x 72 85” up to 77” up to 96” 28000 lbs 5 3” $7,410.00
Stocking and/or High volume Dealers can receive 30% on all ordersCall for details
Pg. 45
To Order Call 1-877-580-6218(No Machines -- Talk with a knowledgeable sales staff without delay)
Email Purchase Orders to: [email protected] Purchase Orders to: 1-701-347-4830
All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Dealer Discount Structure For:
Skid-Steer Attachments and
Tractor Attachments
Quantity Order DiscountsQuantity Discounts
1 unit 25% 2-4 units 27%
5 or more units 30%
Dealer Discount structures are different for our Telehandler and Forklift Attachments. Before quoting those items please note the different discount structure.
The discount structures are listed in detail in the back of each book.
Stocking and/or High volume Dealers can receive 30% on all ordersCall for details
Telehandler And Forklift AttachmentsQuantity Discount
1 unit 30%2-4 units 33%
5 or more units 35%
Marv Haugen Enterprises warrants it’s products , under normal use and maintenance, to be free from defects in material and workmanship for a period of one year from the purchase date from an authorized Haugen Dealer. The limited warranty is extended only to the original purchaser of Haugen Products
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
Warranty Statement
1. During the applicable warranty peroid, Haugen at it’s option , will repair or replace any part determined by Haugen to be defective. Such repair or replacement shall take place at Haugen’s factory or a location designated by Haugen. Under no circumstances shall Haugen be obligated for the cost of any repair or replacement by anyone other than Haugen without its express written consent.
2. Parts may not be returned without the express written authorization from Haugen.3. Some purchased components including but not limited to hooks, cylinders, and hydraulic motors are subject to inspection and warranty of the respective manufactures.
4. This warranty is void if any attempt is made to make field repairs. Make sure to leave the product is original failed condition.
5. To make a claim under this warranty first contact your authorized Haugen dealer. The Haugen dealer shall complete the warranty claim form and obtain written authorization from Haugen to return parts. All warranty claims must include detailed information regarding make and model of the vehicle on which the Haugen product was mounted, hours of use, description of events that led up to the failure, and any other information helpful in reviewing this claim. All warranty returns must be prepaid. Shipments arriving at our factory on a freight collect basis will be refused by our recieving department. The freight charges will be credited if the parts are determined by haugen to be defective, and the associated freight costs in returning those parts will be prepaid by Haugen.
6. Products or parts thereof which, as determined by Haugen’s examination, show wear from normal use, been improperly operated, damaged by accident or negligence, field repaired, altered or modified are not considered defective in material or workmanship and are not covvered by this warranty. This warranty does not obligate Haugen to bear any cost of labor for field repair, replacement, testing, or adjustment nor damaged caused by accident, abuse, misuse, or environmental elements.
7. Any parts or labor required to repair or replace parts not covered under this warranty will be charged to the customer. Parts repaired or replaced by Haugen are then covered by this warranty only for the remainder of the original warranty as if such parts were original parts.
8. Haugen reserves the right to change its specifications and designs at any time.
This warranty is exclusive and in lieu of all other express warranties, if any including implied warranties of merchantability and fitness for a particular purpose. It shall not extend beyond the duration of the expressed warranty provided herein and the remedy for violations of any implied warranty shall be limited to repair or replacement of the defective part pursuant to the terms contained herein. No employee, dealer, salesman,or representative is authorized to change this warranty in any way or grant any other warranty. Haugen shall not be liable for any consequential, incidental, or punitive damages, losses or expenses, including those resulting from or caused by any defects.Pg. 46
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]
5. To make a claim under this warranty first contact your authorized Haugen dealer. The Haugen dealer shall complete the warranty claim form and obtain written authorization from Haugen to return parts. All warranty claims must include detailed information regarding make and model of the vehicle on which the Haugen product was mounted, hours of use, description of events that led up to the failure, and any other information helpful in reviewing this claim. All warranty returns must be prepaid. Shipments arriving at our factory on a freight collect basis will be refused by our recieving department. The freight charges will be credited if the parts are determined by haugen to be defective, and the associated freight costs in returning those parts will be prepaid by Haugen.
Notes:
Pg. 47All prices and specifications subject to change without notice. (Printed 01-15-2019)
Marv Haugen Enterprises Inc.1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218Phone: 701-347-4827 Fax: 701-347-4830
Website: www.haugenattachments.comEmail: [email protected]