+ All Categories
Home > Devices & Hardware > SmartGuard Clear Cover for Electrical Devices

SmartGuard Clear Cover for Electrical Devices

Date post: 13-Apr-2017
Category:
Upload: rick-wiggins
View: 247 times
Download: 0 times
Share this document with a friend
7
SmartGuard ® Made in the USA SmartGuard’s sturdy PRE-FAB LINE offers steel-like performance while saving 50-75% in material cost over metal alternatives. Multigang and combination covers save even more time, using less screws to install. Clear material allows easy identification of device orientation and color. No more stickers or markings required. Proven in use by nationally recognized companies, these covers are fully warranted against any device damage caused by standard of the industry drywall installation and finishing. These covers are tough! Pre-Fab and Device Covers Temporary Safety Covers Mudring Covers Octagon Box Covers Pipe Caps 4 Square Box Enclosures SmartGuardCovers.com Click to Email us or call 360.598.1907 22287 Stottlemeyer Road NE Poulsbo, WA 98370 For more info SmartGuard Pre-Fab DeviceGuards Steel Like Performance Sheetrock Routers will not cut Multigang and Combo Covers Fully Warrantied Clear material, easy ID of Devices Recyclable Save on Labor and Material Cost with Clear Cover for Electrical Devices
Transcript
Page 1: SmartGuard Clear Cover for Electrical Devices

SmartGuard ®

Made in the USA

SmartGuard’s sturdy PRE-FAB LINE offers steel-like performance while saving 50-75% in material cost over metal alternatives. Multigang and combination covers save even more time, using less screws to install. Clear material allows easy identification of device orientation and color. No more stickers or markings required. Proven in use by nationally recognized companies, these covers are fully warranted against any device damage caused by standard of the industry drywall installation and finishing.

These covers are tough!

Pre-Fab andDevice Covers

Temporary SafetyCovers

Mudring Covers

OctagonBox Covers

Pipe Caps

4 SquareBox Enclosures

SmartGuardCovers.com

Click to Email usor call360.598.190722287 Stottlemeyer Road NEPoulsbo, WA 98370

For more info

SmartGuard Pre-Fab DeviceGuards• Steel Like Performance • Sheetrock Routers will not cut• Multigang and Combo Covers • Fully Warrantied • Clear material, easy ID of Devices • Recyclable

Save on Labor

and Material Cost with

Clear Cover for Electrical Devices

Page 2: SmartGuard Clear Cover for Electrical Devices

Made in the USADCP-1 1 Gang Duplex Cover

DCP-3 3 Gang Duplex Cover

DCP-4T 4 Gang Toggle Cover

DCP-1T 1 Gang Toggle Cover

DCP-2D 2 Gang GFCI/Decorator Cover

DCP-4D 4 Gang GFCI/Decorator Cover

DCP-2 2 Gang Duplex Cover

DCP-3T 3 Gang Toggle Cover

DCP-4 4 Gang Duplex Cover

DCP-1D 1 Gang GFCI/Decorator Cover

DCP-2T 2 Gang Toggle Cover

DCP-3D 3 Gang GFCI/Decorator Cover

DCP-DT1 2 Gang GFCI/Toggle Switch Combo

DEVICE GUARDS for Pre Fab offer steel like performance while saving substantial savings in Labor and Material costs. Multi gang and combination covers save even more time, using fewer screws to install than conventional single gang covers. Clear material allows easy identification of device orientation and color, plus eliminating the need for markings or stickers. These covers are fully warranted against any device damage caused by standard of the industry drywall installation and finishing. These covers are Tough!

• Clear material provides easy view of device color and orientation

• Reduce Labor and Material costs• Multigang and combination applications• Steel-like performance• Sheet rock routers will not cut through covers• Used by nationally recognized companies• Fully warrantied against device damage

• Recyclable and proudly made in the USA

Pre-Fab Device Covers for GFCI/Decorator, Duplex and Toggle Switches

•ULSTANDARD514C (NON-CONDUCTIVE AND FLAME RATED)•CERTIFIEDASTMSTANDARD D1790&D638 (IMPACT & TENSILE STRENGTH)

PREFABBENEFITSARECLEAR.Our Products Meet:

PART # DESCRIPTION

22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]

These covers are TOUGH!

SmartGuard ®

Clear Cover for Electrical Devices

Page 3: SmartGuard Clear Cover for Electrical Devices

22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]

SmartGuard ®

Clear Cover for Electrical Devices

SAFETY COVERS for BREAKER BOXES and PANELS satisfy OSHA requirements and meet related ANSI codes.

Clear Temporary Safety Covers for Breaker Boxes and Panels are the best choice for effective holding power and easy view of panel breakers, conduit status and over-all viewing of panel condition. Made from strong durable PVC, these covers are not only puncture

values as well.

• Clear PVC allows covers to stay in place for easy viewing of panel condition

• Strong dielectric properties keep workers safe•• 14” and 20” kits available – adjustable to all sizes

of openings• Strong holding power – covers stay in place and

won’t fall off• Economical pricing – recyclable• OSHA approved – meets related ANSI code

requirements• Convenient low volt covers available

• Recyclable and made in the USA

Recently used at Spokane Falls Com-munity College (53 panel covers), the Electrical Contractor gave their highest recommendation for this product.

Our Products Now Meet:• UL STANDARD 514C

(DIELECTRIC STRENGTH & FLAMMABILITY)

• CERTIFIED ASTM STANDARD D1790 & D638 (IMPACT & TENSILE STRENGTH)

NEW RATING!

Made in the USA

Page 4: SmartGuard Clear Cover for Electrical Devices

22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]

SmartGuard ®

Clear Cover for Electrical Devices

COMMERCIAL MUDRING COVERS provide convenient protection for wiring and plugtail applications.

Commercial MudRing Covers

• Covers keep drywall tools and hands from contacting live wire. Simply remove the cover and get on with a faster and cleaner trim stage.

• Easy protection

• Install at rough-in, easy view of wiring

• Inspection with covers in place

• Keep boxes clean throughout the construction process

• Recyclable and economical

• Made in the USA

Made in the USA

MR1 1 Gang Mud Ring Cover

MR2 2 Gang Mud Ring Cover

MR4 4 Gang Mud Ring Cover

MR3 3 Gang Mud Ring Cover

MR0 3” Round Mud Ring Cover

• UL STANDARD 514C (DIELECTRIC STRENGTH & FLAMMABILITY)

• CERTIFIED ASTM STANDARD D1790 & D638 (IMPACT & TENSILE STRENGTH)

THE BENEFITS ARE CLEAR.

PART # DESCRIPTION

Page 5: SmartGuard Clear Cover for Electrical Devices

Octagon Concrete Box Cover

SGCBOSmartGuard Octagon Concrete Box Cover

Part Octagon Concrete Box Cover

Dimension 4 x 4 x .5

Application Seals out concrete from bottom of octagon box

Installation Method Insert flange side out into opening

Removal Method Pull cover straight out or collapse inward and remove

Mil/Thickness 15 mil

Item Weight .2 oz.

SmartGuard’s NEW OCTAGON CONCRETE BOX COVER for parking garages, post tension slabs and concrete walls.

The Benefits are clear.• Quicker and easier than duct tape

• Seals out concrete products

• Easy snap in fit

• Allows box to sit flat to plywood form

• Strong PVC material

• Economical

• Recyclable and Made in the USA

SmartGuard’s NEWEST release of a handy cover

for sealing the bottom of your concrete box and

eliminating the need for time consuming use of duct

tape. This cover install in seconds, completely seals

out concrete intrusion and allows the box to sit flatter

against plywood forms.

SGCBO

22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]

SmartGuard ®

Clear Cover for Electrical Devices

Page 6: SmartGuard Clear Cover for Electrical Devices

22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]

SmartGuard ®

Clear Cover for Electrical Devices

SmartGuard’s NEWEST release of Yellow Caps are the quickest way to seal PVC Pipe ends, bell ends, couplings

need for the time consuming use of duct tape or expensive cone type solutions.

seconds, com pletely sealing out dirt and concrete products - Bright yellow color easily lets you see Yellow Caps in place – Economical and Recyclable - all our SmartGuard products are proudly made in the USA!!

• Convenient sizes include 3/4“ through 6”

• Save Time, Yellow caps are quicker and easier than Duct TAPE

• Save money over expensive alternatives• Bright yellow color makes caps easily visible• Seals out dirt and concrete products• Made from strong PVC material• Recyclable and economical• Made in the USA

SmartGuard’s NEW YellowCapsYellowCapsSmartGuardSmartGuard

ddddS dS dS dS dS dS dS dS dS dS dS dS dS dS dS dS dS rS rS rrm rm rm rmartGuarS tG dSmartGuardSmartGuardSmartGuardS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GGGGGGGGGSmartGua ddSmartGua dSmartGua dSmartGua dSmartGua dSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuardSmartGuarSmartGuarSmartGuarSmartGuarSmartGuarSmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuarmartGuar

NEW

Made in the USA

Page 7: SmartGuard Clear Cover for Electrical Devices

22287 Stottlemeyer Road NE | Poulsbo, WA 98370 | phone 360.598.1907 | [email protected]

SmartGuard ®

Clear Cover for Electrical DevicesFour Square Box Enclosure

SG4SQESmartGuard Four Square Box Enclosure

Part Four Square Box Enclosure

Dimension 4.125 x 4.125 x 2.25

Application Seals electrical boxes from masonry products and air movement

Installation Method Place cover over back of box and close lid over mudring, snap interlock at four sides

Removal Method Unsnap interlock at four sides, and open lid from over mudring and remove

Mil/Thickness 15 mil

Item Weight .4 oz.

SmartGuard introduces its NEW LINE of FOUR SQUARE BOX ENCLOSURES designed to help streamline and reduce labor and material costs in masonry applications, provide sound proofing and eliminate air drafts.

The Benefits are clear.• One piece box enclosure and lid installs in seconds

• Seal electrical box from masonry products

• Eliminates cold air drafts and unwanted air

movement between spaces

• Economical pricing

• Available masonry bracket securely holds face

of mudring flush with masonry blocks during

construction

• Recyclable and Made in the USA

Normally in a masonry application the boxes arewrapped with duct tape to seal out masonry products.That time consuming task is now replaced witheasy to use fully sealed SmartGuard FOUR SQUAREENCLOSURES. Simply install over box, close lid overmudring, cut for knock outs and you’re done. Very simpleand quick. This same cover is also used to completelyseal out air movement and drafts at interior or exteriorwalls. Great reviews from an established assembly shopon their recent purchase of 4,000 SmartGuard masonryenclosures. Time savings were HUGE!

SG4SQE


Recommended