In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001:2000 standards.
SOILMEC distributes machinery and structures all over the world, supported by SOILMEC subsidiary companies and representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]
G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t
CERTIFIED QUALITY SYSTEM
SM-20LATTICE BOOM CRAWLER CRANE
01/2
005-
1500
-D/F
-Cils
-Il D
igita
le
LATTICE BOOM CRAWLER CRANE
A new model
SM-20 SM-20 SM-20SM-20
Crawler mounted crane designed to meet features and standards of lifting units adding characteristics of the cranes for foundations jobs. Thanks to reduced time of set-up and new design it is ideal for small-medium size jobs sites.Its dimensions allow an easy transport and reduced set-up time.
Main features- Multi element lattice boom.- Fast boom hoist by a single hydraulic piston.- Extendable undercarriage.- Cummins QSB 5.9 diesel engine (240 HP).- Controlled descent or free fall type winches.- Confortable operator’s cab.- Mechanical and hydraulic fittings for casing oscillator.- Self-lifting counterweight.- Tracks removable (optional)- Wide range of optional.
Notes
1 - The rated loads are based on machine at firm level ground and without travelling.
2 - The rated loads are in metric tons valid for 360° degree swing.
3 - The rated loads are calculated to comply DIN 15018, DIN 15019 and do not exceed 75% of tipping load.
4 - The rated loads include the weight of all lifting attachments.
5 - Crawlers must be extended at max track gauge during operations.
6 - The users derate or limit the lifted loads to allow for adverse conditions such as: soft or uneven ground, out of level, wind, side loads, pendulum action, jerking or sudden stopping of load, inexperience of personnel, and possible travelling with a load.
7 - The max line pull for crane operation is only approximate. It must be referred to used rope with end terminations, in accordance to CEE directive.
8 - Lifting chart values must be applied in complete optimum boom assembly and head with plastic sheaves.
LATTICE BOOM CRAWLER CRANE
Winch 84 kN Crane SM20 (without Jib)
Boom 9m 12m 15m 18m 21m
Radius(m)
Capacity(t)
Boom Length (m)
LineParts
Boom Length (m)
2,73,03,23,53,74,04,24,54,85,05,56,06,57,07,58,08,59,09,510,010,511,011,511,812,012,513,013,514,014,515,015,516,016,517,017,518,018,519,019,520,020,3
21,4521,4520,2018,4017,1515,5514,5513,2012,1011,4010,058,857,907,056,305,655,154,65
------------------------
--
20,1518,3517,1015,5514,5013,2012,0511,4010,058,857,907,056,305,655,154,654,303,953,653,353,102,95
------------------
----
16,1015,5014,4513,1511,9511,359,908,807,856,956,255,655,154,654,303,953,653,353,102,952,902,702,502,252,101,951,90
-----------
------
14,3513,0511,8511,209,808,657,706,856,155,555,104,604,253,903,553,303,052,952,802,602,352,202,051,901,751,601,501,401,301,20
------
--------
11,7511,109,658,557,606,756,055,405,004,554,153,803,503,202,952,752,702,502,302,101,951,801,651,551,401,301,201,101,000,950,850,750,700,65
4 4 2 2 2
9 12 15 18 21
Winch 40 kN Crane SM20 (without Jib)
Boom 9m 12m 15m 18m 21m
Radius(m)
Capacity(t)
Boom Length (m)
LineParts
Boom Length (m)
2,93,03,54,04,24,55,06,56,06,57,07,58,08,28,59,09,49,510,010,511,011,512,012,212,513,013,514,014,515,015,516,016,517,017,517,918,018,519,019,520,020,5
8,158,158,158,158,158,158,158,158,158,007,106,405,805,555,254,754,40
-------------------------
--
8,158,158,158,158,158,158,157,957,106,405,805,305,254,754,404,404,053,753,453,202,952,85
------------------
---
8,158,158,158,158,158,157,907,056,355,705,255,254,754,404,404,053,703,453,202,952,852,752,552,352,152,001,85
------------
-----
8,158,158,158,157,806,906,205,605,155,104,704,404,303,953,653,353,102,902,802,652,502,252,101,951,801,701,551,401,301,251,15
------
------
8,158,158,157,656,806,105,505,055,054,604,304,203,853,553,253,002,802,702,602,352,152,001,851,701,601,451,351,251,151,101,051,000,900,800,750,65
1 1 1 1 1
9 12 15 18 21
kg 3500main counterweight
service counterweight (3 elements)kg 460 each
kg 1005 kg 1130
* No safety ratio for crane
CUMMINS QSB5.9155 (116) @ 2200 rpm
6 - in lineturbocharged
279 (30)proportional
LFF1848422
LW848422
25503-0
Extending gauge - Coaxial beams60037104510
1900 (3100)2500 (3700)
2,2
325025503150
B x H 780 x 700
23,826,5255
Make and modelRated Power SAE J 1995CylindersPower supply
Hydraulic SystemMax flowControls
Winches free fallModelLine pullRope diameter
Winches controlled descent ModelLine pullRope diameter
TurretMax widthRotation speed
UndercarriageTypeShoes widthCenter of wheelsMax track lengthTrack gauge retracted (track gauge extended)Retracted tracks width (extended tracks width)Max travelling speed
General FeaturesTailswingMax transport widthMax transport height
BoomTubular boom
WeightsBase machineIn working conditionsTransport configuration with counterweightCounterweightThe shown weights may vary in different outfittings
BHP (kW)n°
l/min (MPa)
kNmm
kNmm
mmrpm
mmmmmmmmmmkm/h
mmmmmm
mm
tttt
Engine
WORKING RADIUS DIMENSIONS & WEIGHTS
4500 4500
60003000
700x
780
700x
780
8824
3142
kg 525 kg 318
kg ~ 25.000
2500
1270
1136
615
90
548408
2500
3700
3100
600
314
1900
1300
2500
5491
2241 3250
4510
3710
2919
2205
935
Working Radius (mm)
24000
23000
22000
21000
20000
19000
18000
17000
16000
15000
14000
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
2400
0
2300
0
2200
0
2100
0
2000
0
1900
0
1800
0
1700
0
1600
0
1500
0
1400
0
1300
0
1200
0
1100
0
1000
0
9000
8000
7000
6000
5000
4000
3000
2000
1000
Hei
ght (
mm
)
9m
70°
60°
50°
40°
30°
20°
12m
15m
18m
21mboom
2500
LATTICE BOOM CRAWLER CRANE
A new model
SM-20 SM-20 SM-20SM-20
Crawler mounted crane designed to meet features and standards of lifting units adding characteristics of the cranes for foundations jobs. Thanks to reduced time of set-up and new design it is ideal for small-medium size jobs sites.Its dimensions allow an easy transport and reduced set-up time.
Main features- Multi element lattice boom.- Fast boom hoist by a single hydraulic piston.- Extendable undercarriage.- Cummins QSB 5.9 diesel engine (240 HP).- Controlled descent or free fall type winches.- Confortable operator’s cab.- Mechanical and hydraulic fittings for casing oscillator.- Self-lifting counterweight.- Tracks removable (optional)- Wide range of optional.
Notes
1 - The rated loads are based on machine at firm level ground and without travelling.
2 - The rated loads are in metric tons valid for 360° degree swing.
3 - The rated loads are calculated to comply DIN 15018, DIN 15019 and do not exceed 75% of tipping load.
4 - The rated loads include the weight of all lifting attachments.
5 - Crawlers must be extended at max track gauge during operations.
6 - The users derate or limit the lifted loads to allow for adverse conditions such as: soft or uneven ground, out of level, wind, side loads, pendulum action, jerking or sudden stopping of load, inexperience of personnel, and possible travelling with a load.
7 - The max line pull for crane operation is only approximate. It must be referred to used rope with end terminations, in accordance to CEE directive.
8 - Lifting chart values must be applied in complete optimum boom assembly and head with plastic sheaves.
LATTICE BOOM CRAWLER CRANE
Winch 84 kN Crane SM20 (without Jib)
Boom 9m 12m 15m 18m 21m
Radius(m)
Capacity(t)
Boom Length (m)
LineParts
Boom Length (m)
2,73,03,23,53,74,04,24,54,85,05,56,06,57,07,58,08,59,09,510,010,511,011,511,812,012,513,013,514,014,515,015,516,016,517,017,518,018,519,019,520,020,3
21,4521,4520,2018,4017,1515,5514,5513,2012,1011,4010,058,857,907,056,305,655,154,65
------------------------
--
20,1518,3517,1015,5514,5013,2012,0511,4010,058,857,907,056,305,655,154,654,303,953,653,353,102,95
------------------
----
16,1015,5014,4513,1511,9511,359,908,807,856,956,255,655,154,654,303,953,653,353,102,952,902,702,502,252,101,951,90
-----------
------
14,3513,0511,8511,209,808,657,706,856,155,555,104,604,253,903,553,303,052,952,802,602,352,202,051,901,751,601,501,401,301,20
------
--------
11,7511,109,658,557,606,756,055,405,004,554,153,803,503,202,952,752,702,502,302,101,951,801,651,551,401,301,201,101,000,950,850,750,700,65
4 4 2 2 2
9 12 15 18 21
Winch 40 kN Crane SM20 (without Jib)
Boom 9m 12m 15m 18m 21m
Radius(m)
Capacity(t)
Boom Length (m)
LineParts
Boom Length (m)
2,93,03,54,04,24,55,06,56,06,57,07,58,08,28,59,09,49,510,010,511,011,512,012,212,513,013,514,014,515,015,516,016,517,017,517,918,018,519,019,520,020,5
8,158,158,158,158,158,158,158,158,158,007,106,405,805,555,254,754,40
-------------------------
--
8,158,158,158,158,158,158,157,957,106,405,805,305,254,754,404,404,053,753,453,202,952,85
------------------
---
8,158,158,158,158,158,157,907,056,355,705,255,254,754,404,404,053,703,453,202,952,852,752,552,352,152,001,85
------------
-----
8,158,158,158,157,806,906,205,605,155,104,704,404,303,953,653,353,102,902,802,652,502,252,101,951,801,701,551,401,301,251,15
------
------
8,158,158,157,656,806,105,505,055,054,604,304,203,853,553,253,002,802,702,602,352,152,001,851,701,601,451,351,251,151,101,051,000,900,800,750,65
1 1 1 1 1
9 12 15 18 21
kg 3500main counterweight
service counterweight (3 elements)kg 460 each
kg 1005 kg 1130
* No safety ratio for crane
CUMMINS QSB5.9155 (116) @ 2200 rpm
6 - in lineturbocharged
279 (30)proportional
LFF1848422
LW848422
25503-0
Extending gauge - Coaxial beams60037104510
1900 (3100)2500 (3700)
2,2
325025503150
B x H 780 x 700
23,826,5255
Make and modelRated Power SAE J 1995CylindersPower supply
Hydraulic SystemMax flowControls
Winches free fallModelLine pullRope diameter
Winches controlled descent ModelLine pullRope diameter
TurretMax widthRotation speed
UndercarriageTypeShoes widthCenter of wheelsMax track lengthTrack gauge retracted (track gauge extended)Retracted tracks width (extended tracks width)Max travelling speed
General FeaturesTailswingMax transport widthMax transport height
BoomTubular boom
WeightsBase machineIn working conditionsTransport configuration with counterweightCounterweightThe shown weights may vary in different outfittings
BHP (kW)n°
l/min (MPa)
kNmm
kNmm
mmrpm
mmmmmmmmmmkm/h
mmmmmm
mm
tttt
Engine
WORKING RADIUS DIMENSIONS & WEIGHTS
4500 4500
60003000
700x
780
700x
780
8824
3142
kg 525 kg 318
kg ~ 25.000
2500
1270
1136
615
90
548408
2500
3700
3100
600
314
1900
1300
2500
5491
2241 3250
4510
3710
2919
2205
935
Working Radius (mm)
24000
23000
22000
21000
20000
19000
18000
17000
16000
15000
14000
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
2400
0
2300
0
2200
0
2100
0
2000
0
1900
0
1800
0
1700
0
1600
0
1500
0
1400
0
1300
0
1200
0
1100
0
1000
0
9000
8000
7000
6000
5000
4000
3000
2000
1000
Hei
ght (
mm
)
9m
70°
60°
50°
40°
30°
20°
12m
15m
18m
21mboom
2500
LATTICE BOOM CRAWLER CRANE
A new model
SM-20 SM-20 SM-20SM-20
Crawler mounted crane designed to meet features and standards of lifting units adding characteristics of the cranes for foundations jobs. Thanks to reduced time of set-up and new design it is ideal for small-medium size jobs sites.Its dimensions allow an easy transport and reduced set-up time.
Main features- Multi element lattice boom.- Fast boom hoist by a single hydraulic piston.- Extendable undercarriage.- Cummins QSB 5.9 diesel engine (240 HP).- Controlled descent or free fall type winches.- Confortable operator’s cab.- Mechanical and hydraulic fittings for casing oscillator.- Self-lifting counterweight.- Tracks removable (optional)- Wide range of optional.
Notes
1 - The rated loads are based on machine at firm level ground and without travelling.
2 - The rated loads are in metric tons valid for 360° degree swing.
3 - The rated loads are calculated to comply DIN 15018, DIN 15019 and do not exceed 75% of tipping load.
4 - The rated loads include the weight of all lifting attachments.
5 - Crawlers must be extended at max track gauge during operations.
6 - The users derate or limit the lifted loads to allow for adverse conditions such as: soft or uneven ground, out of level, wind, side loads, pendulum action, jerking or sudden stopping of load, inexperience of personnel, and possible travelling with a load.
7 - The max line pull for crane operation is only approximate. It must be referred to used rope with end terminations, in accordance to CEE directive.
8 - Lifting chart values must be applied in complete optimum boom assembly and head with plastic sheaves.
LATTICE BOOM CRAWLER CRANE
Winch 84 kN Crane SM20 (without Jib)
Boom 9m 12m 15m 18m 21m
Radius(m)
Capacity(t)
Boom Length (m)
LineParts
Boom Length (m)
2,73,03,23,53,74,04,24,54,85,05,56,06,57,07,58,08,59,09,510,010,511,011,511,812,012,513,013,514,014,515,015,516,016,517,017,518,018,519,019,520,020,3
21,4521,4520,2018,4017,1515,5514,5513,2012,1011,4010,058,857,907,056,305,655,154,65
------------------------
--
20,1518,3517,1015,5514,5013,2012,0511,4010,058,857,907,056,305,655,154,654,303,953,653,353,102,95
------------------
----
16,1015,5014,4513,1511,9511,359,908,807,856,956,255,655,154,654,303,953,653,353,102,952,902,702,502,252,101,951,90
-----------
------
14,3513,0511,8511,209,808,657,706,856,155,555,104,604,253,903,553,303,052,952,802,602,352,202,051,901,751,601,501,401,301,20
------
--------
11,7511,109,658,557,606,756,055,405,004,554,153,803,503,202,952,752,702,502,302,101,951,801,651,551,401,301,201,101,000,950,850,750,700,65
4 4 2 2 2
9 12 15 18 21
Winch 40 kN Crane SM20 (without Jib)
Boom 9m 12m 15m 18m 21m
Radius(m)
Capacity(t)
Boom Length (m)
LineParts
Boom Length (m)
2,93,03,54,04,24,55,06,56,06,57,07,58,08,28,59,09,49,510,010,511,011,512,012,212,513,013,514,014,515,015,516,016,517,017,517,918,018,519,019,520,020,5
8,158,158,158,158,158,158,158,158,158,007,106,405,805,555,254,754,40
-------------------------
--
8,158,158,158,158,158,158,157,957,106,405,805,305,254,754,404,404,053,753,453,202,952,85
------------------
---
8,158,158,158,158,158,157,907,056,355,705,255,254,754,404,404,053,703,453,202,952,852,752,552,352,152,001,85
------------
-----
8,158,158,158,157,806,906,205,605,155,104,704,404,303,953,653,353,102,902,802,652,502,252,101,951,801,701,551,401,301,251,15
------
------
8,158,158,157,656,806,105,505,055,054,604,304,203,853,553,253,002,802,702,602,352,152,001,851,701,601,451,351,251,151,101,051,000,900,800,750,65
1 1 1 1 1
9 12 15 18 21
kg 3500main counterweight
service counterweight (3 elements)kg 460 each
kg 1005 kg 1130
* No safety ratio for crane
CUMMINS QSB5.9155 (116) @ 2200 rpm
6 - in lineturbocharged
279 (30)proportional
LFF1848422
LW848422
25503-0
Extending gauge - Coaxial beams60037104510
1900 (3100)2500 (3700)
2,2
325025503150
B x H 780 x 700
23,826,5255
Make and modelRated Power SAE J 1995CylindersPower supply
Hydraulic SystemMax flowControls
Winches free fallModelLine pullRope diameter
Winches controlled descent ModelLine pullRope diameter
TurretMax widthRotation speed
UndercarriageTypeShoes widthCenter of wheelsMax track lengthTrack gauge retracted (track gauge extended)Retracted tracks width (extended tracks width)Max travelling speed
General FeaturesTailswingMax transport widthMax transport height
BoomTubular boom
WeightsBase machineIn working conditionsTransport configuration with counterweightCounterweightThe shown weights may vary in different outfittings
BHP (kW)n°
l/min (MPa)
kNmm
kNmm
mmrpm
mmmmmmmmmmkm/h
mmmmmm
mm
tttt
Engine
WORKING RADIUS DIMENSIONS & WEIGHTS
4500 4500
60003000
700x
780
700x
780
8824
3142
kg 525 kg 318
kg ~ 25.000
2500
1270
1136
615
90
548408
2500
3700
3100
600
314
1900
1300
2500
5491
2241 3250
4510
3710
2919
2205
935
Working Radius (mm)
24000
23000
22000
21000
20000
19000
18000
17000
16000
15000
14000
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
2400
0
2300
0
2200
0
2100
0
2000
0
1900
0
1800
0
1700
0
1600
0
1500
0
1400
0
1300
0
1200
0
1100
0
1000
0
9000
8000
7000
6000
5000
4000
3000
2000
1000
Hei
ght (
mm
)
9m
70°
60°
50°
40°
30°
20°
12m
15m
18m
21mboom
2500
LATTICE BOOM CRAWLER CRANE
A new model
SM-20 SM-20 SM-20SM-20
Crawler mounted crane designed to meet features and standards of lifting units adding characteristics of the cranes for foundations jobs. Thanks to reduced time of set-up and new design it is ideal for small-medium size jobs sites.Its dimensions allow an easy transport and reduced set-up time.
Main features- Multi element lattice boom.- Fast boom hoist by a single hydraulic piston.- Extendable undercarriage.- Cummins QSB 5.9 diesel engine (240 HP).- Controlled descent or free fall type winches.- Confortable operator’s cab.- Mechanical and hydraulic fittings for casing oscillator.- Self-lifting counterweight.- Tracks removable (optional)- Wide range of optional.
Notes
1 - The rated loads are based on machine at firm level ground and without travelling.
2 - The rated loads are in metric tons valid for 360° degree swing.
3 - The rated loads are calculated to comply DIN 15018, DIN 15019 and do not exceed 75% of tipping load.
4 - The rated loads include the weight of all lifting attachments.
5 - Crawlers must be extended at max track gauge during operations.
6 - The users derate or limit the lifted loads to allow for adverse conditions such as: soft or uneven ground, out of level, wind, side loads, pendulum action, jerking or sudden stopping of load, inexperience of personnel, and possible travelling with a load.
7 - The max line pull for crane operation is only approximate. It must be referred to used rope with end terminations, in accordance to CEE directive.
8 - Lifting chart values must be applied in complete optimum boom assembly and head with plastic sheaves.
LATTICE BOOM CRAWLER CRANE
Winch 84 kN Crane SM20 (without Jib)
Boom 9m 12m 15m 18m 21m
Radius(m)
Capacity(t)
Boom Length (m)
LineParts
Boom Length (m)
2,73,03,23,53,74,04,24,54,85,05,56,06,57,07,58,08,59,09,510,010,511,011,511,812,012,513,013,514,014,515,015,516,016,517,017,518,018,519,019,520,020,3
21,4521,4520,2018,4017,1515,5514,5513,2012,1011,4010,058,857,907,056,305,655,154,65
------------------------
--
20,1518,3517,1015,5514,5013,2012,0511,4010,058,857,907,056,305,655,154,654,303,953,653,353,102,95
------------------
----
16,1015,5014,4513,1511,9511,359,908,807,856,956,255,655,154,654,303,953,653,353,102,952,902,702,502,252,101,951,90
-----------
------
14,3513,0511,8511,209,808,657,706,856,155,555,104,604,253,903,553,303,052,952,802,602,352,202,051,901,751,601,501,401,301,20
------
--------
11,7511,109,658,557,606,756,055,405,004,554,153,803,503,202,952,752,702,502,302,101,951,801,651,551,401,301,201,101,000,950,850,750,700,65
4 4 2 2 2
9 12 15 18 21
Winch 40 kN Crane SM20 (without Jib)
Boom 9m 12m 15m 18m 21m
Radius(m)
Capacity(t)
Boom Length (m)
LineParts
Boom Length (m)
2,93,03,54,04,24,55,06,56,06,57,07,58,08,28,59,09,49,510,010,511,011,512,012,212,513,013,514,014,515,015,516,016,517,017,517,918,018,519,019,520,020,5
8,158,158,158,158,158,158,158,158,158,007,106,405,805,555,254,754,40
-------------------------
--
8,158,158,158,158,158,158,157,957,106,405,805,305,254,754,404,404,053,753,453,202,952,85
------------------
---
8,158,158,158,158,158,157,907,056,355,705,255,254,754,404,404,053,703,453,202,952,852,752,552,352,152,001,85
------------
-----
8,158,158,158,157,806,906,205,605,155,104,704,404,303,953,653,353,102,902,802,652,502,252,101,951,801,701,551,401,301,251,15
------
------
8,158,158,157,656,806,105,505,055,054,604,304,203,853,553,253,002,802,702,602,352,152,001,851,701,601,451,351,251,151,101,051,000,900,800,750,65
1 1 1 1 1
9 12 15 18 21
kg 3500main counterweight
service counterweight (3 elements)kg 460 each
kg 1005 kg 1130
* No safety ratio for crane
CUMMINS QSB5.9155 (116) @ 2200 rpm
6 - in lineturbocharged
279 (30)proportional
LFF1848422
LW848422
25503-0
Extending gauge - Coaxial beams60037104510
1900 (3100)2500 (3700)
2,2
325025503150
B x H 780 x 700
23,826,5255
Make and modelRated Power SAE J 1995CylindersPower supply
Hydraulic SystemMax flowControls
Winches free fallModelLine pullRope diameter
Winches controlled descent ModelLine pullRope diameter
TurretMax widthRotation speed
UndercarriageTypeShoes widthCenter of wheelsMax track lengthTrack gauge retracted (track gauge extended)Retracted tracks width (extended tracks width)Max travelling speed
General FeaturesTailswingMax transport widthMax transport height
BoomTubular boom
WeightsBase machineIn working conditionsTransport configuration with counterweightCounterweightThe shown weights may vary in different outfittings
BHP (kW)n°
l/min (MPa)
kNmm
kNmm
mmrpm
mmmmmmmmmmkm/h
mmmmmm
mm
tttt
Engine
WORKING RADIUS DIMENSIONS & WEIGHTS
4500 4500
60003000
700x
780
700x
780
8824
3142
kg 525 kg 318
kg ~ 25.000
2500
1270
1136
615
90
548408
2500
3700
3100
600
314
1900
1300
2500
5491
2241 3250
4510
3710
2919
2205
935
Working Radius (mm)
24000
23000
22000
21000
20000
19000
18000
17000
16000
15000
14000
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
2400
0
2300
0
2200
0
2100
0
2000
0
1900
0
1800
0
1700
0
1600
0
1500
0
1400
0
1300
0
1200
0
1100
0
1000
0
9000
8000
7000
6000
5000
4000
3000
2000
1000
Hei
ght (
mm
)
9m
70°
60°
50°
40°
30°
20°
12m
15m
18m
21mboom
2500
In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001:2000 standards.
SOILMEC distributes machinery and structures all over the world, supported by SOILMEC subsidiary companies and representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]
G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t
CERTIFIED QUALITY SYSTEM
SM-20LATTICE BOOM CRAWLER CRANE
01/2
005-
1500
-D/F
-Cils
-Il D
igita
le
In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001:2000 standards.
SOILMEC distributes machinery and structures all over the world, supported by SOILMEC subsidiary companies and representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]
G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t
CERTIFIED QUALITY SYSTEM
SM-20LATTICE BOOM CRAWLER CRANE
01/2
005-
1500
-D/F
-Cils
-Il D
igita
le
In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001:2000 standards.
SOILMEC distributes machinery and structures all over the world, supported by SOILMEC subsidiary companies and representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]
G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t
CERTIFIED QUALITY SYSTEM
SM-20LATTICE BOOM CRAWLER CRANE
01/2
005-
1500
-D/F
-Cils
-Il D
igita
le