SolidSeal™ Duct Plug is a two-part, high-expansion foam duct
sealant. It keeps gas, water and vermin out of the duct. SolidSeal™
Duct Plug expands and hardens to a closed cell, rigid structure. This
permanent, but removable, seal blocks both water and gas under moderate
pressure.
www.polywater.com
SolidSeal™ Duct Plug
• Easy to use and apply
• Precise application, no mess, no waste
• Reduce safety hazard from animal waste, pests and vermin
• Innovative form-fitting plugs
• Complies with TIA standard 758-B to seal out gas, water, and vermin
• Expands, cures and seals even when water is present
• Tolerates cable movement and environmental extremes
• Compatible with ducts and cables
• Re-enterable—can be removed
www.polywater.com
Important Notice: The statements here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use.
American Polywater expressly disclaims any implied warranties and conditions of merchant-ability and fitness for a particular purpose. American Polywater’s only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury, or direct, indirect, or consequential damages resulting from product’s use, regardless of the legal theory asserted. For industrial use only. 1-800-328-9384
1-651-430-2270fax [email protected] (e-mail)
LIT-SSFLYER/(5-13)/GH/5-13Copyright ©2012 American Polywater Corporation. All Rights Reserved.
SolidSeal™ Duct Plug comes in a multi-use cartridge. The foam wets and adheres to metals, plastics, and
concrete, and can seal ducts of different sizes. It will conform around complex cable fill configurations. A kit
contains everything required to install a number of duct blocks. See chart.
Application tool available.
Two versatile sizes are available—50 ml for smaller ducts (2” or less), and 250 ml for big jobs (2” or more).
50 ml cartridge—used for small ducts
Duct Size # of seals per SDP-KIT1
3/4” 20
1” 10
11/4” 6
11/2” 5
2” 2
Cat # Description Units/case
SDP-KIT1 1 50 ml cartridge 1 ea
3 static mixing nozzles 6 foam plugging disks 1 foam damming strip 1 pair disposable gloves
Instruction sheet
SDP-KIT1G Same as above with 1 ea Tool-50-11 included
SDP-KITB6 (6) SDP-KIT1’s – Sold 6 kits/cs 6/cs
SDP-KITB6G (6) SDP-KIT1’s With Tool-50-11 6/cs
TOOL-50-11 Dispensing Tool for 50 ml dual cartridge 1 ea
250 ml cartridge—used for large ducts
Duct Size # of seals per SDP-250KIT1
2” 5
3” 3
4” 2
Cat # Description Units/case
SDP-250KIT1 1 250 ml cartridge 1 ea 5 static mixing nozzles 4 foam damming strips 5 pair disposable gloves 5 TC-1 Cleaning Wipes 1 Positioning Rod Instruction sheet
SDP-250KITB6 Same as above - Sold 6 kits/cs 6/cs
TOOL-250 High-Ratio Caulk Style Tool 1 ea