of 66
7/16/2019 Sony Ericsson W595 Disassembly
1/66
Working Instruction, Mechanical
State: Preliminary Rev 11
Working Instruct ion, MechanicalApplicable for W595
CONTENTS
1 Int roduct ion .............................................................................. 31.1 Equipment ................................................................................. 51.2 General cautions ...................................................................... 61.3 Adhes ives ................................................................................. 6
2 Disassembly ............................................................................. 72.1 Overview ................................................................................... 7
2.1.1 Battery Cover and Battery ..................................................... 82.1.2 Deco Plate ............................................................................. 92.1.3 Front Cover Assy ................................................................. 102.1.4 Main Keyboard .................................................................... 112.1.5 Rear Cover .......................................................................... 122.1.6 Top and Bottom Cap ........................................................... 142.1.7 Earspeaker, Display and PBA Navigation ........................... 152.1.8 Frame Assy ......................................................................... 192.1.9 Hinge ................................................................................... 20
3 Replacements ......................................................................... 213.1 Battery Cover and Battery ..................................................... 223.2 Deco Plate ............................................................................... 223.3 Front Cover Assy ................................................................... 223.4 Main Keyboard ........................................................................ 223.5 Rear Cover .............................................................................. 223.6 Top and Bottom Cap .............................................................. 223.7 Earspeaker, Display and PBA Navigation ............................ 223.8 Frame Assy ............................................................................. 233.9 Hinge ....................................................................................... 233.10Camera Assy ........................................................................... 243.11Co-Brand ................................................................................. 263.12Dust Gasket Hinge ................................................................. 273.13Gasket Camera ....................................................................... 273.14Gasket Hinge .......................................................................... 283.15Gasket Microphone ................................................................ 283.16Gasket Speaker Bottom ......................................................... 293.17Gasket Speaker Top ............................................................... 29
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
2/66
Working Instruction,Mechanical
State: Preliminary Rev 11
Company Internal Sony Ericsson Mobile Communications AB
2(66)
3.18Half to Half FPC ...................................................................... 303.19Keyboard Navigation ............................................................. 323.20Light Guide Navi Keyboard ................................................... 333.21Light Guide Main Keyboard ................................................... 343.22Loudspeaker 11x15 ................................................................ 353.23Loudspeaker 9x18 .................................................................. 363.24Main Window .......................................................................... 373.25PBA Main Keyboard FPC ....................................................... 383.26Tape Main Keyboard LED ...................................................... 403.27Tape Navigation LED ............................................................. 413.28Tape Navigation LED middle - version 1 .............................. 423.29Tape Navigation LED middle - version 2 .............................. 423.30Tape for Deco Plate ................................................................ 433.31Volume Key ............................................................................. 433.32Walkman Key .......................................................................... 443.33Walkman Sticker ..................................................................... 443.34Liquid Indicator ...................................................................... 453.35Core Unit Label ....................................................................... 463.36Boarder Swap - Replacement ................................................ 473.37Boarder Swap - Change Label .............................................. 483.38Boarder Swap - Customize of Software ............................... 48
4 Reassembly ............................................................................ 494.1 Overview ................................................................................. 50
4.1.1 Hinge ................................................................................... 514.1.2 Frame Assy ......................................................................... 524.1.3 Earspeaker, Display and PBA Navigation ........................... 534.1.4 Top and Bottom Cap ........................................................... 584.1.5 Rear Cover .......................................................................... 594.1.6 Main Keyboard .................................................................... 614.1.7 Front Cover Assy ................................................................. 624.1.8
Deco Plate ........................................................................... 64
4.1.9 Battery Cover and Battery ................................................... 65
5 Revision History ..................................................................... 66
7/16/2019 Sony Ericsson W595 Disassembly
3/66
Working Instruction,Mechanical
State: Preliminary Rev 11 3(66)
1 Introduction
W595
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
4/66
Working Instruction,Mechanical
State: Preliminary Rev 11 4(66)
W595s
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
5/66
Working Instruction,Mechanical
State: Preliminary Rev 11 5(66)
1.1 Equipment
SPECIAL TOOLS
NTZ 112 459 Torque screwdriver (or equivalent)
1222-3513 Bits (PH00)
NTZ 112 302/2 Front opening tool
NTZ 112 521 Flex film assembly tool
NTZ 112 590 Guitar pick
STANDARD TOOLS
Standard tools have to be locally purchased
Dentist hook
ESD tweezers
OTHER EQUIPMENT
ESD wristband
ESD gloves
LABEL EQUIPMENT
The following special equipment is required when replacingor installing a new label:
Hot air flow solder station
Zebra printer connected to computer
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
6/66
Working Instruction,Mechanical
State: Preliminary Rev 11 6(66)
1.2 General cautionsThe following cautions are considered to be generic for all phone models and will not be repeated inthe Disassembly, Replacements and Reassembly sections:
SWITCH OFF THE PHONE AND REMOVE ANY MEMORY STICK BEFORE THE START OF THE DISASSEMBLY!
KEEP ALL CONTACT SURFACES CLEAN!
BE CAREFUL WHEN USING TOOLS LIKE THE DENTIST HOOK , TWEEZERS, OPENING TOOLS, GUITAR PICKETC. TO AVOID SCRATCHES OR DAMAGES TO THE EXTERIOR AND INTERIOR PARTS OF THE PHONE!
BE CAREFUL NOT TO DAMAGE ANY CONTACT SPRINGS!
REMEMBER TO REMOVE THE PROTECTION FOILS ON NEW PARTS SUCH AS THE FRONT COVER AND LCD!
NEVER TOUCH THE DISPLAY GLASS!
USE AIR BLOW EQUIPMENT TO KEEP THE FRONT WINDOW AND DISPLAY MODULE DUST FREE !
1.3 AdhesivesUse a dentist hook and/or the tweezers to remove old adhesives.Clean the surface with isopropyl alcohol before attaching new adhesives.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
7/66
Working Instruction,Mechanical
State: Preliminary Rev 11 7(66)
2 Disassembly
When you are going to replace a part being listed in Replacements, the instruction of that section
usually begins by directing you to this Disassembly section with a specification of the instructionsyou have to carry out in order to disassemble the phone as far as needed before returning toReplacements for the actual replacement.
Start
DISASSEMBLY REASSEMBLY
Contentspage
REPLACEMENTS
Done
2.1 OverviewThe disassembly is done in the following order:
1. Battery Cover and Battery
2. Deco Plate
3. Front Cover Assy
4. Main Keyboard
5. Rear Cover
6. Top and Bottom Cap
7. Earspeaker
8. Display
9. PBA Navigation
10. Frame Assy
11. Main PBA
12. Hinge
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
8/66
Working Instruction,Mechanical
State: Preliminary Rev 11 8(66)
2.1.1 Battery Cover and Battery
Remove the Battery Cover.
Remove the Battery.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
9/66
Working Instruction,Mechanical
State: Preliminary Rev 11 9(66)
2.1.2 Deco Plate
Release the Deco Plate with a guitar pick.
Remove the Deco Plate.
Do NOT reuse the Deco Plate.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
10/66
Working Instruction,Mechanical
State: Preliminary Rev 11 10(66)
2.1.3 Front Cover Assy
Remove the two screws (PH00).
Use a guitar pick and slide along the side to release thesnap hooks.
Slide along the other side.
Remove the Front Cover.
Do not reuse the Front Cover and Main Window if thephone is produced before W918.
For further information see SI 17199-78713.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
11/66
Working Instruction,Mechanical
State: Preliminary Rev 11 11(66)
2.1.4 Main Keyboard
Release the Main Keyboard with a guitar pick.
Be careful with the Light Guide underneath.
Remove the Main Keyboard.
Do NOT reuse the Main Keyboard.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
12/66
Working Instruction,Mechanical
State: Preliminary Rev 11 12(66)
2.1.5 Rear Cover
Remove the two bottom screws (PH00).
Remove the two top screws (PH00).
Release the snap hooks along both sides with a frontopening tool.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
13/66
Working Instruction,Mechanical
State: Preliminary Rev 11 13(66)
Rear Covercontinue
Release the hook with a guitar pick.
Release the Rear Cover from the core unit.
Be careful with the hook.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
14/66
Working Instruction,Mechanical
State: Preliminary Rev 11 14(66)
2.1.6 Top and Bottom Cap
Remove the Bottom Cap.
Unsnap the hooks on the Top cap.
Remove the Top Cap.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
15/66
Working Instruction,Mechanical
State: Preliminary Rev 11 15(66)
2.1.7 Earspeaker, Display and PBA Navigation
Remove the screw (PH00).
Release the Earspeaker with a guitar pick.
Slide along the Earspeaker fllex.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
16/66
Working Instruction,Mechanical
State: Preliminary Rev 11 16(66)
Earspeaker, Display and PBA Navigation continue
Release the PBA Navigation.
Turn over the PBA Navigation to reach the connectors.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
17/66
Working Instruction,Mechanical
State: Preliminary Rev 11 17(66)
Earspeaker, Display and PBA Navigation continue
Open the connector carefully.
Remove the flex.
Remove the Earspeaker, Display and PBA Navigation.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
18/66
Working Instruction,Mechanical
State: Preliminary Rev 11 18(66)
Earspeaker, Display and PBA Navigation continue
Open the Earspeaker connector carefully.
Remove the Earspeaker flex.
Open the Display connector carefully.
Remove the Display flex.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
19/66
Working Instruction,Mechanical
State: Preliminary Rev 11 19(66)
2.1.8 Frame Assy
Slide carefully along the side button flex with a guitar pick torelease it from the hooks.
Remove the two screws (PH00).
Remove the Frame Assy.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
20/66
Working Instruction,Mechanical
State: Preliminary Rev 11 20(66)
2.1.9 Hinge
Remove the two screws (PH00).
Lift up the Main PBA.
Open the connector carefully.
Remove the Main PBA Keyboard FPC and the Main PBA.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
21/66
Working Instruction,Mechanical
State: Preliminary Rev 11 21(66)
3 Replacements
Search for the part to be replaced on the Contents page and go to that instruction to be found in this
Replacements section.The instruction usually begins by directing you to the Disassembly section with a specification of theinstructions you have to carry out in order to disassemble the phone as far as needed before theactual replacement.
Go back to this Replacements section and carry out the instruction.
The instruction usually ends by directing you to the Reassembly section with a specification of theinstructions you have to carry out in order to reassemble the phone.
Start
DISASSEMBLY REASSEMBLY
Contentspage
REPLACEMENTS
Done
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
22/66
Working Instruction,Mechanical
State: Preliminary Rev 11 22(66)
3.1 Battery Cover and BatteryFollow the 2.1.1 Disassembly instructions
Prepare the new Battery Cover.
Follow the 4.1.9 Reassembly instructions
3.2 Deco PlateFollow the 2.1.1 2.1.2 Disassembly instructions
Prepare the new Deco Plate.
Follow the 4.1.8 4.1.9 Reassembly instructions
3.3 Front Cover AssyFollow the 2.1.1 2.1.3 Disassembly instructions
Prepare the new Front Cover Assy.
Follow the 4.1.7 4.1.9 Reassembly instructions
3.4 Main KeyboardFollow the 2.1.1 2.1.4 Disassembly instructions
Prepare the new Main Keyboard.
Follow the 4.1.6 4.1.9 Reassembly instructions
3.5 Rear CoverFollow the 2.1.1 2.1.5 Disassembly instructions
Prepare the new Rear Cover.
Follow the 4.1.5 4.1.9 Reassembly instructions
3.6 Top and Bottom CapFollow the 2.1.1 2.1.6 Disassembly instructions
Prepare the new Top or/and Bottom Cap.
Follow the 4.1.4 4.1.9 Reassembly instructions
3.7 Earspeaker, Display and PBA NavigationFollow the 2.1.1 2.1.3 and 2.1.7 Disassembly instructions
Prepare the new Earspeaker, Display or/and PBA Navigation.
Follow the 4.1.3 and 4.1.7 4.1.9 Reassembly instructions
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
23/66
Working Instruction,Mechanical
State: Preliminary Rev 11
Company Internal Sony Ericsson Mobile Communications AB
23(66)
3.8 Frame AssyFollow the 2.1.1 2.1.8 Disassembly instructions
Prepare the new Frame Assy.
Follow the 4.1.2 4.1.9 Reassembly instructions
3.9 HingeFollow the 2.1.1 2.1.9 Disassembly instructions
Prepare the new Hinge.
Follow the 4.1.1 4.1.9 Reassembly instructions
7/16/2019 Sony Ericsson W595 Disassembly
24/66
Working Instruction,Mechanical
State: Preliminary Rev 11 24(66)
3.10 Camera Assy
REMOVAL
Follow the 2.1.1 2.1.9 Disassembly instructions.
Lift the Shield Camera Can Lid with a dentist hook.
Remove the Shield Camera Can Lid.
Open the connector carefully.
Remove the Camera.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
25/66
Working Instruction,Mechanical
State: Preliminary Rev 11 25(66)
Camera Assy continue
INSTALLATION
Replace the new Camera flex.
Close the connector gently.
Mount the Shield Camera Can Lid.
Press to attach.
Follow the 4.1.1 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
26/66
Working Instruction,Mechanical
State: Preliminary Rev 11 26(66)
3.11 Co-Brand
REMOVAL
Follow the 2.1.1 Disassembly instructions.
Remove the Co-Brand with a dentist hook.
INSTALLATION
Mount a new Co-Brand.
Press to attach.
Follow the 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
27/66
Working Instruction,Mechanical
State: Preliminary Rev 11 27(66)
3.12 Dust Gasket Hinge
REMOVAL
Follow the 2.1.1 2.1.9 Disassembly instructions.
Remove the Dust Gasket Hinge.
Clean the Rear Cover with isopropyl alcohol.
INSTALLATION
Mount a new Dust Gasket Hinge. Press to attach.
Follow the 4.1.1 4.1.9 Reassembly instructions.
3.13 Gasket Camera
REMOVAL
Follow the 2.1.1 2.1.5 Disassembly instructions.
Remove the Gasket Camera.
Clean the Rear Cover with isopropyl alcohol.
INSTALLATION
Mount a new Gasket Camera. Press to attach.
Follow the 4.1.5 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
28/66
Working Instruction,Mechanical
State: Preliminary Rev 11 28(66)
3.14 Gasket Hinge
REMOVAL
Follow the 2.1.1 2.1.9 Disassembly instructions.
Remove the Gasket Hinge.
Clean the Rear Cover with isopropyl alcohol.
INSTALLATION
Mount a new Gasket Hinge. Press to attach.
Follow the 4.1.1 4.1.9 Reassembly instructions.
3.15 Gasket Microphone
REMOVAL
Follow the 2.1.1 2.1.9 Disassembly instructions.
Remove the Gasket Microphone.
INSTALLATION
Mount a new Gasket Microphone.
Follow the 4.1.1 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
29/66
Working Instruction,Mechanical
State: Preliminary Rev 11 29(66)
3.16 Gasket Speaker Bottom
REMOVAL
Follow the 2.1.1 2.1.6 and 2.1.8 Disassembly instructions.
Remove the Gasket Speaker Bottom.
Clean the Frame Assy with isopropyl alcohol.
INSTALLATION
Mount a new Gasket Speaker Bottom with a par oftweezers. Press with your finger to attach.
Follow the 4.1.2 and 4.1.4 4.1.9 Reassembly instructions.
3.17 Gasket Speaker Top
REMOVAL
Follow the 2.1.1 2.1.5 Disassembly instructions.
Remove the Gasket Speaker Top.
Clean the Rear Cover with isopropyl alcohol.
INSTALLATION
Mount a new Gasket Speaker Top.
Follow the 4.1.5 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
30/66
Working Instruction,Mechanical
State: Preliminary Rev 11 30(66)
3.18 Half to Half FPC
REMOVAL
Follow the 2.1.1 2.1.9 Disassembly instructions.
Lift up the Half to Half FPC from the Shield Can Lid with apar of tweezers.
Open the connector carefully.
Remove the Half to Half FPC.
Remove the HtH Adhesive with a dentist hook.
Clean the Shield Can Lid with isopropyl alcohol.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
31/66
Working Instruction,Mechanical
State: Preliminary Rev 11 31(66)
Half to Half FPC continue
INSTALLATION
Replace a new HtH Adhesive.
Install the Half to Half FPC in the connector.
Close the connector gently.
Mount the Half to Half FPC to the HtH Adhesive.
Press to attach.
Follow the 4.1.1 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
32/66
Working Instruction,Mechanical
State: Preliminary Rev 11 32(66)
3.19 Keyboard Navigation
REMOVAL
Follow the 2.1.1 2.1.3 Disassembly instructions.
Remove the Keyboard Navigation.
INSTALLATION
Mount a new Keyboard Navigation.
Follow the 4.1.7 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
33/66
Working Instruction,Mechanical
State: Preliminary Rev 11 33(66)
3.20 Light Guide Navi Keyboard
REMOVAL
Follow the 2.1.1 2.1.3 Disassembly instructions andthe 3.26 Replacements instructions.
Remove the Light Guide Navi Keyboard with a guitar pick.
INSTALLATION
Mount a new Light Guide Navi Keyboard.
Press to attach.
Follow the 3.26 Replacements instructions andthe 4.1.7 - 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
34/66
Working Instruction,Mechanical
State: Preliminary Rev 11 34(66)
3.21 Light Guide Main Keyboard
REMOVAL
Follow the 2.1.1 2.1.4 Disassembly instructions andthe 3.27 or 3.28 Replacements instructions.
Remove the Light Guide Main Keyboard with a par oftweezers.
INSTALLATION
Mount a new Light Guide Main Keyboard.
Press to attach.
Follow the 3.27 or 3.28 Replacements instructions andthe 4.1.6 - 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
35/66
Working Instruction,Mechanical
State: Preliminary Rev 11 35(66)
3.22 Loudspeaker 11x15
REMOVAL
Follow the 2.1.1 2.1.8 Disassembly instructions.
Remove the Loudspeaker 11x15 with a dentist hook.
Remove the Adhesive Speaker Bottom with a dentist hook.
Clean the pit in the Frame Assy with isopropyl alcohol.
INSTALLATION
Mount a new Adhesive Speaker Bottom.
Mount a new Loudspeaker 11x15.
Notice that the pin on the Loudspeaker should be in theright direction. Press to attach.
Follow the 4.1.2 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
36/66
Working Instruction,Mechanical
State: Preliminary Rev 11 36(66)
3.23 Loudspeaker 9x18
REMOVAL
Follow the 2.1.1 2.1.8 Disassembly instructions.
Remove the Loudspeaker 9x18 with a dentist hook.
INSTALLATION
Mount a new Loudspeaker 9x18.
Notice that the pin on the Loudspeaker should be in theright direction
Press to attach.
Follow the 4.1.2 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
37/66
Working Instruction,Mechanical
State: Preliminary Rev 11 37(66)
3.24 Main Window
REMOVAL
Follow the 2.1.1 2.1.3 Disassembly instructions.
Remove the Main Window from the Front Cover.
INSTALLATION
Mount a new Main Window.
Press to attach.
Remove the Protection Tape.
Follow the 4.1.7 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
38/66
Working Instruction,Mechanical
State: Preliminary Rev 11 38(66)
3.25 PBA Main Keyboard FPC
REMOVAL
Follow the 2.1.1 2.1.9 Disassembly instructions.
Release the tongue from the backside of the Hinge.
Push it through the Hinge.
Remove the PBA Main Keyboard FPC.
Remove the old Conductive adhesive.
There will be a new Conductive adhesive on the newPBA Main Keyboard FPC.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
39/66
Working Instruction,Mechanical
State: Preliminary Rev 11 39(66)
PBA Main Keyboard FPC continue
Remove the Adhesive Main Keyboard with a par oftweezers. Clean with isopropyl alcohol.
INSTALLATION
Mount a new Adhesive Main Keyboard with a par oftweezers.
Push the right tongue through the Hinge.
Push the left tongue through the Hinge.
Mount the new PBA Main Keyboard FPC on the Hinge.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
40/66
Working Instruction,Mechanical
State: Preliminary Rev 11 40(66)
PBA Main Keyboard FPC continue
Mount the tongue.
Press to attach.
Follow the 3.21 Replacements instructions andthe 4.1.1 - 4.1.9 Reassembly instructions.
3.26 Tape Main Keyboard LED
REMOVAL
Follow the 2.1.1 2.1.4 Disassembly instructions.
Remove the Tape.
INSTALLATION
Mount a new Tape and press with your finger to attach.
Follow the 4.1.5 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
41/66
Working Instruction,Mechanical
State: Preliminary Rev 11 41(66)
3.27 Tape Navigation LED
REMOVAL
Follow the 2.1.1 2.1.3 Disassembly instructions.
Remove the Tape.
INSTALLATION
Mount a new Tape and press with your finger to attach.
Follow the 4.1.7 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
42/66
Working Instruction,Mechanical
State: Preliminary Rev 11 42(66)
3.28 Tape Navigation LED middle - version 1
REMOVAL
Follow the 2.1.1 2.1.3 Disassembly instructions.
Remove the Tape.
INSTALLATION
Mount a new Tape and press with your finger to attach.
Follow the 4.1.7 4.1.9 Reassembly instructions.
3.29 Tape Navigation LED middle - version 2
REMOVAL
Follow the 2.1.1 2.1.3 Disassembly instructions.
Remove the Tape.
INSTALLATION
Mount a new Tape and press with your finger to attach.
Follow the 4.1.7 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
43/66
Working Instruction,Mechanical
State: Preliminary Rev 11 43(66)
3.30 Tape for Deco Plate
REMOVAL
Remove the Tape for Deco Plate.
INSTALLATION
Mount a new Tape for Deco Plate.
3.31 Volume Key
REMOVAL
Follow the 2.1.1 2.1.5 Disassembly instructions.
Remove the Volume Key.
INSTALLATION
Mount a new Volume Key.
Follow the 4.1.5 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
44/66
Working Instruction,Mechanical
State: Preliminary Rev 11 44(66)
3.32 Walkman Key
REMOVAL
Follow the 2.1.1 2.1.5 Disassembly instructions.
Remove the Walkman Key.
INSTALLATION
Mount a new Walkman Key.
Follow the 4.1.5 4.1.9 Reassembly instructions.
3.33 Walkman Sticker
REMOVAL
Remove the Walkman Sticker.
INSTALLATION
Mount a new Sticker and press with your finger to attach.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
45/66
Working Instruction,Mechanical
State: Preliminary Rev 11 45(66)
3.34 Liquid Indicator
INSPECTION
There is a Liquid Indicator located at the arrow.
REMOVAL
Follow the 2.1.1 2.1.8 Disassembly instructions.
Remove the old Liquid Indicator with a dentist hook.
INSTALLATION
Use a pair of tweezers to mount a new Liquid Indicatoron the Frame Assy.
Follow the 4.1.2 - 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
46/66
Working Instruction,Mechanical
State: Preliminary Rev 11 46(66)
3.35 Core Unit Label
Follow the 2.1.1 Disassembly instructions.
Read the old label and/or write the information into theLabel make program before removal.
Note the position of the label before removal.
Heat up the label by using hot air, if needed.
Carefully remove the label without causing scratches.
If there still are residues, clean the surface with isopropylalcohol.
Check that the proper label format is loaded in the Zebraprinter.
Write a new label by using the program Label make andcheck that the printing is OK.
Take the new label and place it onto the frame as in theadjacent picture.
ONE LABEL ONLY IS ALLOWED!
Follow the 4.1.9 Reassembly instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
47/66
Working Instruction,Mechanical
State: Preliminary Rev 11 47(66)
3.36 Boarder Swap - Replacement
REMOVAL
Follow the 2.1.1 2.1.9 Disassembly instructions andthe 3.10 and 3.15 Replacements instructions.
REPLACE
Replace with a swap board.
INSTALLATION
Follow the 4.1.1 - 4.1.9 Reassembly instructions andthe 3.10 and 3.15 Replacements instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
48/66
Working Instruction,Mechanical
State: Preliminary Rev 11 48(66)
3.37 Boarder Swap - Change Label
CHANGE LABEL
Follow the instructions in the Generic Repair Manual Build swap for change of label.
.
3.38 Boarder Swap - Customize of Software
CUSTOMIZE OF SOFTWARE
Follow the instructions in the Generic Repair Manual Build swap for customization of the software.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
49/66
Working Instruction,Mechanical
State: Preliminary Rev 11 49(66)
4 Reassembly
After replacing a part being listed in Replacements, the instruction of that section usually ends by
directing you to this Reassembly section with a specification of the instructions you have to carryout in order to reassemble the phone.
Start
DISASSEMBLY REASSEMBLY
Contentspage
REPLACEMENTS
Done
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
50/66
Working Instruction,Mechanical
State: Preliminary Rev 11
Company Internal Sony Ericsson Mobile Communications AB
50(66)
4.1 OverviewThe disassembly is done in the following order:
1. Hinge2. Main PBA
3. Frame Assy
4. PBA Navigation
5. Display
6. Earspeaker
7. Top and Bottom Cap
8. Rear Cover
9. Main Keyboard
10. Front Cover Assy
11. Deco Plate
12. Battery Cover and Battery
7/16/2019 Sony Ericsson W595 Disassembly
51/66
Working Instruction,Mechanical
State: Preliminary Rev 11 51(66)
4.1.1 Hinge
Install the Main PBA Keyboard FPC in the connector.
Close the connector gently.
Install the Half to Half FPC through the Hinge.
Install two new Screws Ph 1.6 x 3.0 with a torquescrewdriver at 12 Ncm (PH00 bit).
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
52/66
Working Instruction,Mechanical
State: Preliminary Rev 11 52(66)
4.1.2 Frame Assy
Mount the Frame Assy.
Press to attach.
Install two new Screws Ph 1.2 x 3.4 with a torquescrewdriver at 12 Ncm (PH00 bit).
If the PBA Main Keyboard FPC is reused - Clean theSidekey flex with isopropyl alcohol to remove the oldadhesive.
Mount a new Adhesive Sidekey FPC.
Mount the Sidekey flex with a par of tweezers.
Notice the hooks.
Press to attach.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
53/66
Working Instruction,Mechanical
State: Preliminary Rev 11 53(66)
4.1.3 Earspeaker, Display and PBA Navigation
If the Earspeaker is reused - Clean the Earspeaker flexwith isopropyl alcohol to remove the old adhesive.
Mount a new Adhesive Earsp FPC Top and a new AdhesiveEarsp FPC Bottom.
If the Earspeaker is reused - remove the AdhesiveEarspeaker.
If the Earspeaker is reused - mount a newAdhesiveEarspeaker.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
54/66
Working Instruction,Mechanical
State: Preliminary Rev 11 54(66)
Earspeaker, Display and PBA Navigation continue
Install the Display flex in the connector.
Close the connector gently.
Install the Earspeaker flex in the connector.
Close the connector gently.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
55/66
Working Instruction,Mechanical
State: Preliminary Rev 11 55(66)
Earspeaker, Display and PBA Navigation continue
Remove the old Adhesive Navigation PBA and clean withisopropyl alcohol.
Mount a new Adhesive Navigation PBA.
Slide the Display under the hooks.
Turn over the PBA Navigation and install the Half to HalfFPC in the connector.
Close the connector.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
56/66
Working Instruction,Mechanical
State: Preliminary Rev 11 56(66)
Earspeaker, Display and PBA Navigation continue
Slide the PBA Navigation under the hook.
Press the PBA Navigation to attach.
Press the Earspeaker flex to attach.
Press the Earspeaker to attach.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
57/66
Working Instruction,Mechanical
State: Preliminary Rev 11 57(66)
Earspeaker, Display and PBA Navigation continue
Install a new Screw Ph 1.4 x 1.6 with a torque screwdriverat 12 Ncm (PH00 bit).
Replace the Light Guide Navi Keyboard if it is damagedor loose.
Follow the 3.9.11 Replacements instructions.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
58/66
Working Instruction,Mechanical
State: Preliminary Rev 11 58(66)
4.1.4 Top and Bottom Cap
Mount the Top Cap. Notice the two hooks.
Mount the Bottom Cap.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
59/66
Working Instruction,Mechanical
State: Preliminary Rev 11 59(66)
4.1.5 Rear Cover
Start by this hook when the Rear Cover is mounted.
Bend to mount the Rear Cover by the System connector.
Notice the hook.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
60/66
Working Instruction,Mechanical
State: Preliminary Rev 11 60(66)
Rear Covercontinue
Install two new Screws Ph 1.6 x 6.5 with a torquescrewdriver at 15 Ncm (PH00 bit) in the top.
Install two new Screws Ph 1.6 x 6.5 with a torquescrewdriver at 15 Ncm (PH00 bit) in the bottom.
Replace the Light Guide Main Keyboard if it is damagedor loose.
Follow the 3.9.12 Replacements instructions.
Press along both sides to attach the snap hooks.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
61/66
Working Instruction,Mechanical
State: Preliminary Rev 11 61(66)
4.1.6 Main Keyboard
Mount a newMain Keyboard. Start by the Microphone.
Align the Main Keyboard along the Bottom Cap.
Press to attach.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
62/66
Working Instruction,Mechanical
State: Preliminary Rev 11 62(66)
4.1.7 Front Cover Assy
Take a new Front Cover and Main Window ifthe phone isproduced before W918.
For further information see SI 17199-78713.
Follow 3.9.15 Replacements instructions for the MainWindow.
The Main Window Gasket is brittle. Replace the MainWindow if Main Window Gasket is damaged.
Follow the 3.9.15 Replacements instructions.
Align the Front Cover. Start with the hooks in the lower part.
Press the Front Cover with your fingers.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
63/66
Working Instruction,Mechanical
State: Preliminary Rev 11 63(66)
Front Covercontinue
Install two new Screws Ph 1.4 x 2.1 with a torquescrewdriver at 15 Ncm (PH00 bit).
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
64/66
Working Instruction,Mechanical
State: Preliminary Rev 11 64(66)
4.1.8 Deco Plate
Mount a newDeco Plate. Be careful with the two hooks onthe Deco Plate.
Press to attach.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
65/66
Working Instruction,Mechanical
State: Preliminary Rev 11 65(66)
4.1.9 Battery Cover and Battery
Mount the Battery.
Mount the Battery Cover.
Press to attach.
Company Internal Sony Ericsson Mobile Communications AB
7/16/2019 Sony Ericsson W595 Disassembly
66/66
Working Instruction,Mechanical
5 Revision History
Rev. Date Changes / Comments
1 2008-09-26 First release
2 2008-10-09 Added instr for 1210-0722
3 2008-10-28 Added a picture for reassembling of the Battery cover.
4 2008-11-13 Changed part number NTZ112459
5 2009-01-29 Added tool 1222-3513
6 2009-03-24 Added instruction for Tape Navigation LED middle version 2and Walkman Sticker
7 2009-05-02 Changed description for the two Loudspeakers
8 2009-05-29 Added instruction for the Front Cover
9 2009-07-09 Added chapter 3.35 -3.37 regarding Board Swap
10 2009-07-10 Updated chapter 3.35
11 2009-08-09 Added Tape for Deco Plate