Date post: | 06-Apr-2016 |
Category: |
Documents |
Upload: | construction-equipment-guide |
View: | 272 times |
Download: | 15 times |
Robins & Morton photoAbout 650,000 cu. yds.(496,960 cu m) of dirtwill be moved, in total.
By Jack Elliott Jr.ASSOCIATED PRESS
JACKSON, Miss. (AP) Mention highwaysafety and people have all sorts of ideas of whatthat means. To the Highway Patrol, it suggests expanding
the ranks of state troopers. For the MississippiDepartment of Transportation, its a well-main-tained road system. For Mothers Against DrunkDriving, getting intoxicated drivers off the roadsis the highest priority. And there are thoseagainst texting, tweeting or talking on cell-phones. However, if you ask Senate Transportation
Committee Chairman Willie Simmons and
Failing BridgesProve a PrimaryPublic Concern
With an emotional blessing of the land, participants broke ground on a150,000 sq. ft. (13,935 sq m) Cherokee Indian Hospital and clinical spacethats now under construction. A site known as the Long Blanket Tract was
selected for the new facility in Cherokee, N.C., which is being built adjacent to the current hospi-tal. Our entire community is excited about a new hospital, said Jody Bradley, public relations offi-
cer of Cherokee Indian Hospital. Along with the promise of a new facility comes new jobs, newservices and new opportunities for our community. Cherokee Hospital is historically a place whereyou can see family and friends you havent seen in a while. Its a social gathering place for many.We want to make it a place to come when youre well, to walk, to get a massage, to be healthy, notjust a place to come when youre sick. We hope to change the perception of health and hospitals
Excitement Builds for NewCherokee Indian Hospital
Ditch Witch Moves to
Knoxville8
Ring Power Hosts Demo
Day, Open House22
Focus 4 Transforms
Machinery16
Inside
see CHEROKEE page 82
The Nations Best Read Construction Newspaper Founded 1957.
$3.00
Happy Thanksgiving!!!
November 26, 2014 Vol. XXVI No.24 470 Maryland Drive Ft. Washington, PA 19034 215-885-2900 Toll Free 800-523-2200 Fax 215-885-2910
www.constructionequipmentguide.com
On Nov. 13, Associated EquipmentDistributors (AED) joined 375 industry tradeassociations and chambers from 50 states tovoice strong concerns with the U.S.Environmental Protection Agency (EPA) andthe U.S. Army Corps of Engineers flawed pro-posed rule to dramatically expand the scope offederal authority over water and land uses acrossthe country. The association called for the pro-posal to be withdrawn on both legal and busi-ness grounds.The administrations efforts to redefine
waters of the United States have been a com-plete failure, said Brian McGuire, AEDs pres-ident and CEO. The EPAs claim that it isreducing the total waters under its control is notjust inaccurate, it is patently false. If the new def-
AED to EPA:Sink Waters ofU.S. Proposal
SoutheastEdition
see WATER page 36
see BRIDGES page 80
By Cindy RileyCEG CORRESPONDENT
Table of Contents ................4
Paving Section..............42-52
Trailers Section ............57-75
Parts Section ................76-77
Business Calendar ............77
Auction Section..........98-105
Advertisers Index ............106
Page 2 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
Corporate704-494-8100
Asheville828-687-0620
Greenville252-754-5280
Columbia803-791-0740
North Charleston843-414-1120
TENNESSEEKnoxville
865-525-1845
Chattanooga423-308-7940
GEORGIASavannah912-964-8079
NORTH CAROLINA SOUTH CAROLINA
Call ASC Construction Equipment for Doosan Portable Power Sales, Service, Parts or Rentals.
Portable Power
WWW.ASCVOLVO.COM
Charlotte704-596-8283
Raleigh919-661-8710
Piedmont864-704-1060
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 3
Excavators-Crawler2013 KOMATSU PC360 LC-10, 900 Hrs ..............................$278,0002011 VOLVO EC210CL, 3693 Hrs ..........................................$138,9002013 VOLVO EC220D, 2354 Hrs ..............................................$144,500(3) 2013 VOLVO EC220DL, 1565-1973 Hrs ..$145,750-$150,0002008 VOLVO EC240CL, 7100 Hrs ............................................$93,5002011 VOLVO EC240CL, 3047 Hrs ..........................................$150,0002012 VOLVO EC250D LR, 2236 Hrs ......................................$189,0002011 VOLVO EC250DL, 3400 Hrs ............................................$161,2502013 VOLVO EC250DL, 2281 Hrs............................................$170,500(2) 2011 VOLVO EC340DL, 3594-4554 Hrs ..$177,800-$184,000(6) 2012 VOLVO EC340DL, 2000-3900 Hrs ..$181,000-$214,500(3) 2013 VOLVO EC340DL, 1681-2765 Hrs ..$211,250-$220,0002013 VOLVO EC380DL, 3102 Hrs ..........................................$222,0002011 VOLVO EC460C LC, 5719 Hrs ......................................$250,000(2) 2012 VOLVO EC480DL, 2668-2720 Hrs $291,500-$328,0002013 VOLVO EC480DL, 2783 Hrs ..........................................$324,500
Excavators-Wheel(2) 2011 VOLVO EW180C, 2946-3273 Hrs ....$161,200-$166,7002012 VOLVO EW180D, 1785 Hrs ............................................$194,500
Motor Graders2011 VOLVO G946B, 1837 Hrs ................................................$211,200
Off-Highway Trucks2011 VOLVO A25F, 4300 Hrs ....................................................$242,000(3) 2012 VOLVO A25F, 2900-3121 Hrs ..........$283,500-$305,750(4) 2013 VOLVO A25F, 1704-1984 Hrs ..........$286,000-$305,0002005 VOLVO A30D ........................................................................$165,0002008 VOLVO A30E, 7600 Hrs....................................................$170,500
2011 VOLVO A30E, 3409 Hrs....................................................$283,500(10) 2012 VOLVO A30F, 2541-3969 Hrs........$300,000-$328,000(3) 2013 VOLVO A30F, 1954-2964 Hrs ..........$324,500-$330,0002014 VOLVO A30F, 1790 Hrs ....................................................$328,6002012 VOLVO A35F, 2652 Hrs ....................................................$388,3002010 VOLVO A40E, 3875 Hrs ..................................................$339,200(10) 2011 VOLVO A40F, 3720-6615 Hrs ........$319,000-$383,000(17) 2012 VOLVO A40F, 2512-5758 Hrs ........$324,500-$447,000(4) 2013 VOLVO A40F, 2688-4368 Hrs ..........$388,300-$402,800(3) 2013 VOLVO A40F FS, 1875-2738 Hrs ....$455,800-$494,750
Water Equipment - Truck2006 VOLVO A30D, 7500 Hrs ..................................................$255,750
Wheel Loaders2010 VOLVO L110F, 5350 Hrs ..................................................$155,6002011 VOLVO L110F, 6883 Hrs ..................................................$143,000(2) 2012 VOLVO L110G, 1651-4397 Hrs ......$200,000-$242,000(6) 2013 VOLVO L110G, 1743-3481 Hrs ......$209,000-$234,0002009 VOLVO L150F, 7338 Hrs ..................................................$183,400(2) 2010 VOLVO L150F, 11436-13235 Hrs ....$133,400-$133,500(2) 2012 VOLVO L150G, 2869-2891 Hrs ......$267,000-$305,7502011 VOLVO L180G, 5216 Hrs ................................................$278,0002013 VOLVO L180G, 3619 Hrs ................................................$334,0002013 VOLVO L220G, 1486 Hrs ................................................$413,400(2) 2012 VOLVO L250G, 2425-3392 Hrs ......$355,000-$399,0002013 VOLVO L60G, 1583 Hrs ....................................................$144,0002012 VOLVO L70G, 1851 Hrs ....................................................$151,250(2) 2013 VOLVO L70G, 2823-3109 Hrs..........................$147,000 Ea.(4) 2012 VOLVO L90G, 1627-3219 Hrs ..........$183,333-$194,500(10) 2013 VOLVO L90G, 1598-4582 Hrs........$156,000-$192,500
2013 VOLVO EC340DL, 1897 Hrs ..$220,0002012 VOLVO L150G, 2869 Hrs ..$305,750 2011 VOLVO A40F, 4600 Hrs......$333,900
A40 Finance leasing available for 24 months with payments as low as $7,900 per month. Call Doug Wilson for details.
Full inventory at: www.ascvolvo.com
VOLVO USED EQUIPMENT
ASC ConstructionEquipment USA, Inc.
North CarolinaCharlotteRaleighAshevilleGreenville
South CarolinaColumbiaNorth CharlestonPiedmont
GeorgiaBufordForest ParkSavannah
East TennesseeKnoxvilleChattanoogaLaVergne
North DakotaBismarckFargoMinotWilliston
Contact your local dealer:
Doug [email protected]
Billy [email protected]
Page 4 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted 2014, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, let-ters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subjectto Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarilyreflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsiblefor clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisementsare not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effortis taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
---
SPECIAL SECTION57 TRAILERSBe sure to check out this special section! Keep up to date with the latest information on trailers.
FEATURES8 DITCH WITCH RELOCATES TO NEW KNOXVILLE, TENN., LOCATIONThe company offers a full line of Ditch Witch products, attachments and parts forsale, as well as sales and service. The group serves middle and eastern Tennessee,as well as nine counties in southwestern Virginia.
14 WETHERINGTON TRACTOR PURCHASES FIVE KOBELCO SK350SWetherington Tractor Service purchased one of five limited edition Kobelco SK350excavators from GS Equipment, featuring imagery from each branch of the armedforces. Profits from these excavators are donated to the Wounded Warrior Project,a non-profit organization supporting injured veterans and their families.
16 FOCUS 4 INTENT ON MAKING OLDER IRON LOOKAS GOOD AS NEWFocus 4 still does all of the painting and service work for Ritchie Bros., but it alsohas begun to expand its non-auction painting, with an aim toward being a hub forlocal construction firms to bring their equipment in for painting.
22 RING POWER HOSTS DEMO DAY, POWERGENERATION OPEN HOUSE IN ORLANDOHundreds of visitors were in attendance at Ring Powers Orlando Demo Day andPower Generation Systems open house. The one-day event placed an emphasis onequipment demonstrations, the companys Power Generation Systems division andshowcasing services that Ring Power has to offer.
28 EQUIPMENT ABOUNDS AT LINDER OKTOBERFESTEVENTS IN FLA., S.C.Oompah music, German food and equipment displays greeted visitors to LinderIndustrial Machinerys annual Oktoberfest celebration. This year, the events wereheld at the new branch facility in Orlando, Fla., and Columbia, S.C.
34 ARTBA ANNOUNCES 2014, 15 OFFICERSThe American Road & Transportation Builders Association (ARTBA) announced theelection of its 2014-2015 officers during the associations national convention,held Sept. 7 to 9, in Rancho Palos Verdes, Calif.
72 FELLING TRAILERS CELEBRATES 40 YEARS WITHWEEKEND OF EVENTSTo celebrate its 40th anniversary, a community open house with lunch was held onOct. 24. On Oct. 25, the Statewide Tour of Manufacturing and an employee/familyopen house were held.
76 RITCHIE ANNOUNCES FLORIDA FEBRUARY 2015AUCTION DATESThe auctioneer announced its premier global auction will be held in Orlando, Fla.,on Feb. 16 to 20, 2015.
80 PIRTEK IN CHARLOTTE, N.C., HELPS TO PRESERVE APIECE OF LOCAL HISTORYThe PIRTEK Center received a request from the city of Charlotte to re-hose a 1948bulldozer for display at the Charlotte Aviation Museum located next to theCharlotte Douglas International Airport.
105 IRONPLANET ACQUIRES FIRMSIronPlanet has acquired Kruse Energy and Equipment Auctioneers LLC, a leader inoilfield equipment auctions, extending its presence in the oilfield industry. Termswere not disclosed.
EQUIPMENT42 WIRTGEN W 220 Cold Milling Machine
44 BOMAG BW100AD-4 Roller
48 ROADTEC RX-100e Utility Milling Machine
DEPARTMENTS77 BUSINESS CALENDAR
96 CLASSIFIEDS
98 COMING AUCTIONS
SOUTHEAST EDITIONCirculated Throughout Alabama Arkansas Florida Georgia Louisiana
Mississippi North Carolina South Carolina Tennessee Virginia Puerto Rico Virgin Islands
Founder, Publisher & CEO Edwin M. McKeon Sr.Southeast Publisher Richard C. McKeon
Editor In Chief Craig Mongeau Associate Editor Christine Wolkin
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900Toll Free 800/523-2200
Fax 215/885-2910
Web site www.constructionequipmentguide.comEditorial e-mail [email protected]
Advertising e-mail [email protected]
For advertising rates Contact Richard C. McKeon North & South Carolina Tennessee Virginia704/553-8888
Toll Free 800/288-4234 Fax 704/553-8899
e-mail [email protected]
Kent HogeboomNational Sales Manager315/866-1423
Toll Free 800/988-1203Fax 315/866-1379
e-mail [email protected]
Contact Rich Olivier Alabama Arkansas Georgia Mississippi Tennessee Florida Panhandle770/443-3174
Toll Free 800/409-1479Fax 770/443-3176
e-mail [email protected]
Contact Jim Van Natta Florida Virgin Islands Puerto Rico
407/365-5720Toll Free 800/344-3026
Fax 407/366-3192e-mail [email protected]
Contact Dale Agnew Louisiana
Toll Free 877/877-4997 Fax 972/719-2611
e-mail [email protected]
Mobile LinkedIn Facebook Twitter YouTube
To read these stories and many more, visit www.constructionequipmentguide.com
IN THIS ISSUE148 22
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 5
URVUDH\HHUKWVWDPR..RHYLWDYRQQLFDIIDHZQHKZQHK7''. HXVWDPR..R.'..R UVLXVWDPR.
UHL7ZHQQRVUXRKPR..RHNLOVPDUJRUSXV*GHWDUJHWQLHKWQLURWFGQXRIHYH::HVUH]RGXOFQLVOHGRPURWDYDDYF[HYDDYF[HVWLURIGHQZRQHU
7VHQLKFDPLUHL7URL/HUHKZ(5$&XVWDPIRWVXVZROODWDDWKW63*DHOEPLQHERWPHKWG&3&3JQLGXWRV\OWKJLUGQDVURWDY
LIHQHED\OQLDWUUWHFVWDDWK7OSPRFVPURIUHSUHGQRUSVHNDWWLHGDUJHQLIHY\OELGHUFQLGQDHOLJD:&3GQD&3VWLQXWQHOOHF[HHU\HK
VXRWWHWQLHFLYUUYHV\UU\DWQHPLOHYHOZHQDRW\WLYLWFXGREQRHPRKWDHOLWDVUJQLQUXWGHWUUWDWVRVODH::H:GQD+GLYDDY'GLDV
WVULIHKWURIVODYUUYHWDDWLFHUSSDH::HOHVERMOODPVGQDJLEURIIRXVWDPR..RRWJVXRUHPXQHYDDYKH::H
LVHU3GLYDDY'
5ER%
WQHGLGQD+
UHWKJL5
URWDDWUHS2VHQL6\UU\UD+
OOHZR3]WLU)
QLUHSX65ER%
WQHGQHWUHWKJL5
WQHGQHWQLUHSX6OOHZR3]WLU)
Page 6 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
SOLID PERFORMANCE MADE SIMPLE.SOLID PERFORMANCE MADE SIMPLE.
Introducing SDLG wheel loaders where simplicity and reliability come standard. Get the performance features you need, and none that you dont. Theyre easy to operate, easy to maintain, and a perfect fi t for your day-to-day jobs. Best of all, theyre backed by a local dealer network, so youll have a partner thats with you for the long haul.
Stop by your local SDLG dealer to see how incredible simplicity can be. Visit us online at sdlgna.com.
CORPORATE: 704.494.8100
Georgia North Carolina South Carolina Tennesse
Buford678.318.9500
Asheville828.687.0620
Charleston843.414.1120
Chattanooga423.308.7940
Forest Park770.319.0074
Charlotte704.596.8283
Columbia803.791.0740
Knoxville865.525.1845
Savannah912.964.8079
Greenville252.754.5280
Piedmont864.704.1060
Raleigh919.661.8710
TAMPA8418 Palm River RoadTampa, FL 33619813-630-0077
Fax: 813-630-2233
ORLANDO9601 Boggy Creek RoadOrlando, FL 32824-8728
407-850-9614Fax: 407-850-0823
JACKSONVILLE8750 Philips Hwy
Jacksonville, FL 32256904-737-6000
Fax: 904-737-1260
FORT MYERS5151 Dr. Martin Luther King, Jr.
Blvd.Ft. Myers, FL 33905239-481-8554
Fax: 239-481-3302
DAVIE5210 Reese RoadDavie, FL 33314954-581-4744
Fax: 954-583-0318
MIAMI (Export Parts Facility)6144 NW 74th Ave.Miami, FL 33166-3710
305-477-2442Fax: 305-477-3383
LAKE CITY539 SW Arrowhead TerraceLake City, FL 32024386-758-7444
Fax: 386-758-7744
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 7
TAMPA8418 Palm River RoadTampa, FL 33619813-630-0077Fax: 813-630-2233
ORLANDO9601 Boggy Creek RoadOrlando, FL 32824-8728407-850-9614Fax: 407-850-0823
JACKSONVILLE8750 Philips HwyJacksonville, FL 32256904-737-6000Fax: 904-737-1260
FORT MYERS5151 Dr. Martin Luther King, Jr.Blvd.Ft. Myers, FL 33905239-481-8554Fax: 239-481-3302
DAVIE5210 Reese RoadDavie, FL 33314954-581-4744Fax: 954-583-0318
MIAMI(Export Parts Facility)6144 NW 74th Ave.Miami, FL 33166-3710305-477-2442Fax: 305-477-3383
LAKE CITY539 SW Arrowhead TerraceLake City, FL 32024386-758-7444Fax: 386-758-7744
Page 8 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
Ditch Witch Relocates to New Knoxville, Tenn., LocationBy Brenda RuggieroCEG CORRESPONDENT
Ditch Witch of Tennessee recently relocated inthe Knoxville area to 10732 Dutchtown Road. Thisis in addition to its La Vergne (Nashville) location.The company offers a full line of Ditch Witch prod-ucts, attachments and parts for sale, as well as salesand service. The group serves middle and easternTennessee, as well as nine counties in southwesternVirginia.In addition to Ditch Witch, product lines repre-
sented include HammerHead moles and air ham-mers, Baroid drilling fluids and Cam Superline trail-ers. In the Nashville/Middle, Tenn., area they repre-sent Kubota Construction Equipmentproducts as well, including excavators,wheel loaders, backhoe loaders, trackloaders and skid steer loaders.Ray Romano is the owner and CEO.
He took over the Ditch Witch ofTennessee business about four years agowhen he returned to Tennessee after 10years of traveling and living overseas. Thetwo businesses had been in operationsince the 1960s.I was looking for something more
local upon returning from Australia,Romano said. After networking a bit andfinding out that there was a dealershipopportunity with Ditch Witch, it becameclear that it would be a good fit for me.Although my background and experiencewas with Cat dealers and Caterpillar, bothmanufacturers represent value, quality,productivity and durability in their respec-tive products, as well as have great brandrecognition.Romano said that Ditch Witch is an interesting family
owned success story that has grown to be innovative withwhat is now a worldwide brand. However, manufacturinghas remained in the United States, in Perry, Okla.When Romano originally acquired the businesses, he
leased the Topside Road/Blount County facility from theprevious owner. While it was well known to older cus-tomers, it was not in a convenient location for Knoxvillegrowth areas or in the normal travel area to attract new cus-tomers. This new location is in a much higher traffic and growth
area of Knoxville, and much more convenient for customersright off the Lovell Road exit on I-40, Romano said.Romano fully renovated the 6,000 sq. ft. (557.4 sq m)
facility, which is located on 1.2 acres. There are currentlyfive employees, with plans to add two to three more. RoyRolen is the service manager, and he has two service tech-nicians. Trent Sullivan is the parts counter sales person, andDean Terry is the sales representative.The company deals with utility horizontal directional
drilling contractors, rental houses, utility companies, munic-ipalities, construction companies, hardscape and landscapecontractors, plumbing contractors and electrical contractors,among others.Whether its electric, gas, water, sewer, TV cable or
Internet service, everyone wants it underground, Romanosaid. Underground is not new for water, sewer and gas, but
its only been in the last 20 years or so that residential sub-divisions have gone underground completely in the streetsand to each house. Also, with the tremendous demand forcable TV and faster broadband Internet service, there aremiles of cable to be placed underground in suburban andrural areas.The demand for hardscapes and irrigation also has
increased the need for small trenching and/or plowingequipment. With the latest directional drilling equipmentyou can drill through most any underground conditions,including rock. There is a busy network of utilities under-ground already so locating existing pipes, cables, etc. is acritical issue now before digging, trenching or drilling anynew holes underground. There are a lot of old pipes andcable that need replacement so the need for undergroundequipment is here to stay for a while.Romano said he plans to expand the business in the areas
of rock drilling and rental, which will require the addition ofanother service technician and sales representative in 2015.According to Romano, he got his start in the parts depart-
ment of Milton CAT in New Hampshire in 1975. After 15years of sales and sales management experience there, hetook sales, rental and used equipment responsibility for HOPenn Machinery, the dealer in the southern region of NewYork.In 1995 when Cat was looking to establish a worldwide
used equipment organization for dealers they called on
Romano to start up Caterpillar Redistribution Services Inc.,a wholly owned subsidiary in Nashville, Tenn. In 1999, heassisted the venture capital start-up IronPlanet online equip-ment auctions before getting the call in 2000 to CEOWesTrac, the Cat dealer in Sydney Australia.During his time in Sydney, Romano also was asked to
manage the development of WesTrac China, its new territo-ry in Beijing and northeast China. In 2008, as part ofWesTracs long term rental strategy, Romano was asked tobe interim CEO of Coates Hire, the largest rental companyin Australia, which WesTrac acquired with the CarlyleGroup.In his new venture, Romano has not left his zeal for the
industry behind, and continues to strive for excellence.We encourage customers to visit our new facility, and in
particular our well stocked parts lobby, for their needs,Romano said. We provide solutions to the best of our abil-ity and with urgency. I want customers to leave with nodoubt in their mind that when they need something or havea problem, we are their preferred supplier. Customers dontwant to feel that they have to check or shop around, theywant to trust that you will do the best you can for them everytime.For more information, visit www.ditchwitchtn.com. (This story also can be found on Construction
Equipment Guides Web site at www.constructionequip-mentguide.com.) CEG
Duane Oelrich works on a DitchWitch JT20 horizontal drill. DitchWitch of Tennessee can service up tonine machines in the service area.
Dean Terry stands withthis Ditch Witch RT30.
(L-R) are Roy Rolen, service manager; Duane Oelrich, serv-ice technician; and Trent Sullivan, parts.
The new facility is conveniently locatedoff I-40 at Lovell Road exit 374 inKnoxville.
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 9
Our dealers recognize a perfect pairing when they see it. They see our single-line focus and dedication to innovation and excellence. They see how well Link-Belt excavators by LBX and Kawasaki wheel loaders by KCMA pair to work a job site in no time. Its time you took a look. Check with your local dealer today.
Main Office:1023 S. 50th Street Tampa, FL
866-586-8956
Fort Lauderdale(Pompano Beach)
954-327-8808
Fort Myers293-334-6063
Orlando407-859-9160
Jacksonville904-268-4400
Page 10 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
ascvolvo.com
GEORGIABuford678.318.9500Forest Park770.319.0074Savannah912.964.8079
SOUTH CAROLINACharleston843.414.1120Columbia803.791.0740Piedmont864.704.1060
NORTH CAROLINAAsheville828.687.0620Charlotte704.596.8283Greenville252.754.5280Raleigh919.661.8710
TENNESSEEChattanooga423.308.7940Knoxville865.525.1845
NORTH DAKOTABismarck701.250.4882Fargo701.271.2360Minot701.839.4020Williston701.570.5309
You work hard every day. At ASC, we know how important your job is, and we want to make sure that your machines are efficient, reliable and productive, so that you can get your job done right. Our Volvo articulated haulers are here to give you the capability to tackle every job and the performance to help you reap greater profits.
You learned long ago theresNo substitute for power and performance.
Smart Works.
1:46 PM
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 11
Page 12 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
866/342-7665
For more information call:
TopconHaul Truck HT-30
t 4 YEAR WARRANTYtSMART DESIGNtRIDICULOUSLY TOUGHtLIGHT WEIGHTtLOCKABLEtTIE DOWN SLOTtRECESSED LATCHES
ask us about:
Not your ordinary cooler!
NOW AVAILABLEAT BENCHMARK
A best-selling ice chest with one-piece, roto-molded construction for extreme toughness and durability.
Constructed of food-grade, UV resistant kayak plastic and DryIce compatible.
Get Outfitted for any job!Outtter 5054 Quart Capacity
Ideal Can Capacity: 46 cans + IceMax Can Capacity: 56 cans
Weight: 25 lbsIce Retention: 5 to 14 Days4 year No Fuss Warranty
all purpose (hunting, shing, tailgating, camping)
can be carried by 1 personbay boat casting platform
WRXJKGXUDEOHVWD\VFROGIRUGD\VPDQ\VL]HVWRFKRRVHIURP
X-63iTopcon
t T DESIGNARSMOUSLRIDICUL
t AWWARREAR Y 4
T DESIGNOUGHY TUSLLY T
YANTARR
t OUSLRIDICULt LIGHT WEIGHTt ABLEOCKLt TIE DOWN SLt RECESSED LA
OUGHY TUSLLY TLIGHT WEIGHT
ABLETOTIE DOWN SLCHEST LA AT
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 13
HOT USED / RENTAL FLEET SPECIALS2006 Cat D6R III XL, 6700 Hrs, Cab, AC, SU Blade, Good UC ....................................................................................................................$129,0002013 Laymor SM400 Sweeper, Enclosed Vista Cab with A/C, 8 Ft. Broom, 74HP Kubota ..........................................................................$46,9002010 Terex TA300, 3300 Hrs, 6x6, Cummins Tier 3, Good Tires, Warranty ................................................................................................$167,5002007 Volvo EC210LC Excavator, 4840 Hrs, A/C, Heat, Radio, Wide Pads, 48 Bkt, Hyd Thumb unit#2155 ................................................$83,5002006 Volvo A25D, 6600 hours, Rebuilt Transmission, AC, Heat, unit#7009 ..............................................................................................$119,000
Call Will Blackerby 336-357-5005
www.mayequip.com
Lexington, NC(866) 629-3784
Columbia, SC(803) 409-0460
May Heavy EquipmentYour Authorized Distributor
Ask about 0% Financing
RENTALS SALES PARTS SERVICEHYUNDAI
Reliability backedby the best industrywarranty, Hyundai,Moving You Further.Choose Hyundai for your next job.
TEREX
Terex ArcticTrucks Powerful& ProductiveTerex Gen 9trucks are built for productive
hauling, with bodycapacities that arematched to their outstanding powerand braking abili-ties. Terex Gen 9 trucks are a powerful and
productive choicefor any job site.
www.mayequip.comColumbia, SC (803) 409-0460
www.mayequip.comLexington, NC (866) 629-3784
BOMAG
300 HP Class Best maneuverability in its class Four fully steerable tracks Hydraulic side plates Low operating cost Folding conveyor standard
BM1300/30MILLING MACHINE
Page 14 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
RingPowerCrane.comNE W & USED SALES t RENTALS t PARTS t SERVICE
8&1&3'03."//6"-$3"/& */41&$5*0/4 t 8:64&%$3"/&4
Now Offering Tadano Mantis Cranes in Florida & North Carolina!Tele-Boom Crawler Cranes Up to 130 Tons, Height to 236
FLORIDASt. Augustine904.737.7730
Pompano Beach954.971.9440
Tampa/Orlando407.855.6195
Miami (Intl Sales)305.477.8717
OTHER LOCATIONS:NORTH CAROLINA 704.795.3636GEORGIA 770.774.7300
SOUTH CAROLINALadson843.818.1954
Wetherington Tractor Purchases Five Kobelco SK350sWetherington Tractor Service purchased one
of five limited edition Kobelco SK350 excavatorsfrom GS Equipment, featuring imagery from eachbranch of the armed forces. Profits from these exca-vators are donated to the Wounded Warrior Project,a non-profit organization supporting injured veter-ans and their families.Weve used Kobelco equipment for several
years, said Kimball Wetherington, chief operatingofficer of Wetherington Tractor Service. In the pastwe had a SK350 excavator, and when the timecame that we needed a larger machine again, theKobelco Wounded Warrior SK350 caught my eye.We like the lifting capacity of Kobelco excavatorssince were using them to set large material. Wewere already familiar with the machine, so thatswhat we purchased.GS Equipment is the reason we chose Kobelco
equipment. You can buy the best machine, but if thedealership doesnt respond when theres an issue, itdoesnt do you any good. We like the machine, butthe reason we bought it goes back to our relation-ship with GS Equipment. If something goes wrong,
they get you back up and working quickly.For more information, visit
www.gsequipment.net or www.wetheringtontrac-torservice.com.
(This story also can be found on ConstructionEquipment Guides Web site at www.construc-tionequipmentguide.com.) CEG
Wetherington Tractor Service purchased one of five limited edition Kobelco SK350 excavatorsfrom GS Equipment, featuring imagery from each branch of the armed forces.
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 15
www.accranes.com
Please call us for your parts, boom and attachment needs!
ATLANTIC COAST CRANES & MACHINERY, INC.10429 Success Street, Ashland, Virginia 23005
(804) 798-8840 / Fax: (804) 798-9505Wally Jones - [email protected] / Dennis Samuel - [email protected] / Dee Carter - [email protected]
Visit our website www.accranes.com, for more information
2011 Grove GMK5275-275 Ton All TerrainCrane, 223 Boom, 72 Jib, Mercedes, 20.5 tires,
3,768 hrs...Please Call
2000 American HC80-80 Ton CrawlerCrane, 140 Boom, 2 Winches, IS&T, Block,
Ball....Please Call
2012 Liebherr LTM1220-275 Ton AllTerrain Crane, 197 Boom, 95 Jib, Dolly Prepped,
10x6x10, 1,430 hrs...Please Call
2008 Grove GMK7550-550 Ton All TerrainCrane, 197 Boom, 240 Luffing, 230 Fixed, 2
Hoist, Mercedes, 4,983 hrs...Please Call
2011 Grove GMK6350L-350 US Ton AllTerrain Crane, 263 Boom, Jib, Mercedes Engines,
Americanized, 3,100 hours...Please Call
1980 American 5299-50 Ton CrawlerCrane, 120 Boom, Cummins, Aux. Hoist, Main Hoist
w/ PLL, air controls...Please Call
Crane UndercarriageParts Specialist
at Tremendous Savings for all Makes & ModelsTerex-American, HC Crawlers, 500/700/900 Series, Manitowoc
2250, 4100, etc., Link Belt & KobelcoAftermarket Undercarriage Parts (High Quality, Low Price!)
for late model & older Crawler CranesPlease call Wally Jones (804) 798-8840,
[email protected] for prices!
OEM
Quality, Low
Price!
Page 16 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
Focus 4 Intent on Making Older Iron Look as Good as NewBy Eric OlsonCEG CORRESPONDENT
Randy Fitts offers an extensive menu of equipment serv-ice work at his company, but it is the painting done by hiscrew he wants local contractors to know about.Making construction equipment look brand new again is
the specialty of Focus 4 Inc., a service company locatedsouthwest of Orlando, Fla., just off Interstate 4.The firm is in a 50,000 sq. ft. (4,645 sq m) facility at the
Ritchie Bros. Auctioneers site, where Focus 4 was foundedin 2008 to be a service company that supported the large auc-tion outfit.
Focus 4 still does all of the painting and service work forRitchie Bros., but it also has begun to expand its non-auctionpainting, with an aim toward being a hub for local construc-tion firms to bring their equipment in for painting. Focus 4 is attractive to local contractors because of its
convenient location in central Florida right off I-4, Fittssaid. Our sense of urgency is unparalleled to any other firmin the industry. We understand deadlines because of the auc-tion business that we service. We know the longer themachine is in our shop the more downtime the customerexperiences.Fitts said that his company does all of its painting
within two 100 by 30 ft. (30.5 by 9.1 m) painting bays
at its facility. His crews use the latest high volume low pres-sure (HVLP) spray guns that apply low emission and lowvolatile organic compound VOC paint.Additionally, in keeping with its intention to be as envi-
ronmentally friendly as possible, Focus 4s wash racksprocess and recycle all the water used at its four-bay pressurewashing facility. Here they clean, detail and polish trucks,trailers and equipment.The companys painting operation can do both standard
and custom jobs and because the size of its paint shop canhandle numerous amounts of large equipment, Fitts said.
Focus 4 does all of the painting and service work for Ritchie Bros., but it also hasbegun to expand its non-auction painting, with an aim toward being a hub for localconstruction firms to bring their equipment in for painting.
Making construction equipment look brand new again is the specialty of Focus 4Inc., a service company located southwest of Orlando, Fla., just off Interstate 4.
Focus 4 Inc. does all of its painting within two 100 by 30 ft. (30.5 by9.1 m) painting bays at its facility.
Focus 4s wash racksprocess and recycle allthe water used at itsfour-bay pressurewashing facility.
see FOCUS page 54
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 17
606 S. R. 16 East, Green Cove Springs, FL 32043
904-284-9670 Fax: 904-358-8706Call Neil Corrado: 888-370-9336 or 904-284-9670 Cell: 904-571-9270 Email: [email protected]
www.mobromarine.com
MOBRO MARINE, INC.
Mobro MarineMeeting your Marine Needs Since 1962
SPECIAL SALE: Kobelco CK850G
150 ft boom, 2 drums, free fall both drums, block and ball
Call Neil Corrado 904.571.9270
Page 18 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
ACT Construction Equipment5425 Equipment DriveCharlotte, NC 28262
Charlotte5425 Equipment Dr.Charlotte, NC 28262(910) 254-3525
Winston-Salem355 Business Park Dr.
Winston-Salem, NC 27107(336) 397-5000
Wilmington3001 Boundary St.
Wilmington, NC 28405(910) 254-3525
Used Machine Deals:Excavators
2013 SV100-1693 Hours - $78,200
Tracked Loaders2013 T210
482 Hours - $37,900
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 19
Miami305-821-2273
Fort Myers239-690-0661
Tampa813-341-4646
West Palm Beach561-296-9710
Orlando407-888-0024
Jacksonville904-516-5380
Jacksonville
Now6 Florida
Locations
Over 59 Years of Experience"Now
providing service &selling parts in theJacksonville area"
904-516-5380
Page 20 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
WWW.CLEVELANDBROTHERS.COM USED EQUIPMENT - 855.545.0267 ext. 1
2004 CAT D5N LGP TRACK-TYPE TRACTOR, ID#UT14209, EROPS, A/C, PAT BLADE, UC @ 10629HRS, 30 SHOES 29-32%, BUSHINGS 32-36%NOT TURNED, LINKS 58-70%, IDLERS 24%,ROLLERS 57% AVG, CARRIERS 83/88% ..$58,000
2006 CAT 904B COMPACT WHEEL LOADER, ID# UP14158, EROPS, A/C, HYDRAULIC QUICKCOUPLER, BUCKET, TIRES @ 2186 HRS., RIGHTTIRES 57%, LEFT TIRES 71%....................$45,000
2007 CAT 325DL HYD EXCAVATOR, ID# UP13755,CAB, A/C, 1 PC. BOOM, 10 6 LONG STICK, HYD.QUICK COUPLER, BKT., AUX HYD, PLUMBED FORHAMMER USE, TRAVEL STRAIGHT PEDAL, COLDWEATHER START, RUBBER BUMPER, UC @ 7259HRS., 32" SHOES 63%, BUSHINGS 24-30% NOTTURNED, LINKS 55%, INTERNAL TRACKS 95%,SEGMENTS 40%, IDLERS 99%..................$115,000
2011 CAT 304D CR MINI HYD EXCAVATOR, ID# UT14241, TIER III ENGINE, CAB, A/C, AUXHYD, HYD. THUMB, PLUMBED FOR HAMMERUSE ..............................................................$41,000
2006 CAT D7R XR W TRACK-TYPE TRACTOR,ID# UP12290, CAB, A/C, ANGLE BLADE, WINCH,SWEEPS, AIR SEAT SUSPENSION, UC @ 5,587HRS., SHOES @ 64%, BUSHINGS 84%, LINKS84%, SEGMENTS 65%, CARRIERS 82%....................................................................................$235,000
2005 CAT 928GZ WHEEL LOADER, ID# UT13585,EROPS, A/C, WHEEL STEERING, HYD. SINGLESTICK CONTROL, GP BUCKET, FOAM FILLEDTIRES ..........................................................$95,500
2011 CAT 312DL HYDRAULIC EXCAVATOR, ID#UT13453, CAB, AIR CONDITIONING, HYDRAULICCOUPLER, BUCKET, STEEL BUMPER....$115,000
2011 CAT 416E BACKHOE LOADER, ID# 100486,EROPS, A/C, 4WD, RIDE CONTROL, AUX. HYD.SGP GRONT BKT., E-STICK, REAR BUCKET, STA-BILIZER PADS, TIRES@2040 HRS., RF 50%, LF80%, RR 30%, LR 50%................................$79,000
2008 CAT 330DL HYD. EXCAVATOR, ID#UT13679, CAB, A/C, AUX. HYD, BKT, UC @ 11286HRS, 31.5 TG SHOES 84%, 79-99% NOTTURNED, LINKS 44-58%, IDLERS 82%, ROLLERS58-72% AVG, CARRIER ROLLERS 74-92%$136,500
2012 CAT 242B SKID STEER LOADER, ID#UP13672, OROPS, 1-SPEED, COUNTERWEIGHT,STANDARD FLOW, SELF-LEVELING, ENGINEBLOCK HEATER, DEMAND FAN, CAT TIRES @369 HRS 85% ..............................................$30,500
2003 CAT D6N XL TRACK-TYPE TRACTOR, ID#UT13882, EROPS, A/C, DIFF STEERING, PATFOLDABLE BLADE, SINGLE TILT, GRADE CON-TROL READY, DRAWBAR, STANDARD SALT UC@ 12762 HRS, 22 SHOES 89%, LINKS 83-88%,BUSHINGS 99% NOT TURNED, SEGMENTS 85%,IDLERS 56-88% ..........................................$74,500
1997 CAT 14H MOTOR GRADER, ID# UP12196,EROPS, A/C, ENGINE HEATER, MULTI SHANKRIPPER, SNOW PROTECTION, PUSH BLOCK,20.5R25 TIRES @ 11379HRS, FRONTS 58-66%,REARS 46-58%..........................................$184,000
2004 CAT 972G WHEEL LOADER, ID# UP13990,EROPS, A/C, RIDE CONTROL, WHEEL STEER-ING, REAR VISION CAMERA, FUSION COUPLER,GP BUCKET, PAYLOAD MONITORING SYSTEM,26.5R25 TIRES @ 10,431 HRS: 81-85%......................................................................................$155,500
1993 KOMATSU PC40 MINI HYD EXCAVATOR, ID# UT14097, CAB, 1PC SWING BOOM, LONGSTICK, BKT, MECHANICAL THUMB, 15 SHOES ........................................................................$24,200
2011 CAT 299C MULTI-TERRAIN LOADER, ID# UP13534, TIER III ENGINE, EROPS, AIR CONDITIONING, HEATER, 2-SPEED TRAVEL,STANDARD FLOW, MANUAL QUICK COUPLER,BUCKET, 18IN SHOES 60% @ 950HRS ....$62,000
2005 CAT 740 ARTICULATED TRUCK, ID#UP13430, CAB, A/C, 6X6, RETARDER, TIRES @6803 HRS., RF 69%, LF 32%, RR1 17%, RR253%, LR1 67%, LR2 3% ............................$227,500
1999 CAT 773D OFF HIGHWAY TRUCK, ID#UP12192, CAB, A/C, DUAL SLOPE BODY, LINER,TRACTION CONTROL, RETARDER, TITAN24.00R35 TIRES @ 17247HRS, FRONTS 82%,REARS 75% ..............................................$299,500
2010 CAT 740 ARTIC EJECTOR TRUCK, ID#UP13553, CAB, A/C, 6X6, RETARDER, PRE-LUBESYSTEM, OVERSIZE BED WITH ROCK EJEC-TOR, 29.5R25 TIRES @ 11035HRS, RF 75%, LF65%, RR1 RECAP 50%, RR2 65%, LR1 RECAP50%, LR2 RECAP 40%..............................$236,500
2011 CAT 420E ST BACKHOE LOADER, ID#UT13610, TIER III C4.4 ENGINE, EROPS, A/C,4X4, STANDARD LOADER, EXTENDABLE STICK,REAR BUCKET, GP FRONT BUCKET W/BOCE,AUX. HYDRAULICS, FIRESTONE TIRES @ 959HRS, FRONTS 43/50%, REARS 70/67% ....$81,000
2008 CASE 445 SKID STEER LOADER, ID# UT14268, CAB, 2-SPEED TRAVEL, QUICKCOUPLER, BUCKET, CAT TIRES 99% @ 1615HRS..............................................................$25,000
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 21
WWW.CLEVELANDBROTHERS.COMUSED PARTS - 855.545.0267 ext. 2
CATERPILLAR 120M2, Hitch, #3377511/51815CATERPILLAR 16, Final Drive, #4D7950/43906CATERPILLAR 16, Transmissions, #9M8300/42387CATERPILLAR 216, 216B, 226, 226B, 228, 232, 242, 246, 247,252, 256, 257, 262, 267, 268, 272, 277, 287, Bucket, GP,
#2856095/32284CATERPILLAR 304CR, 304.5, 305CR, Bucket, GP,
#2277268/53007CATERPILLAR 304CR, 304.5, 305CR, Bucket, GP,
#3031340/53009CATERPILLAR 311, SWIVEL, #4I7603/54757CATERPILLAR 311, 312, Booms, #5I3412/54544CATERPILLAR 313D, 318BL, 318BLN, 318CL, 318CLN, 319DL,
319DLN, 320D, 320D GC, 320DLRR, 320EL, 323DL,323DLN, 323EL, 324DL, 324DLN, 326DL, 329DL, 345DL,Track Groups
CATERPILLAR 314, Blade, #3387943/51608CATERPILLAR 315, 315B, 315C, Bucket, GP, #C315-48/53200CATERPILLAR 315D, Final Drive, #3500452/47695CATERPILLAR 320, Final Drive, #7Y1571/37840CATERPILLAR 320, 321, 322C, 325C, 330C, Bucket, GP,
#1325052/54432CATERPILLAR 322C, 325C, 330C, Bkt, GP, #1282935/54431CATERPILLAR 322CL, 322CLN, 322L, 325, 325C, 325CL,
325D, 325DL, 329D, 329DL, 329DLN, 329E, 329EL,329ELN, 336DL, 345C LC, Track Groups
CATERPILLAR 325C CR, 325C LCR, 328D LCR, 330B, 330BL,330BLN, 330C, 330CL, 330CLN, 330D, 330DL, 330L,330LN, 336D, 336DL, 336EL, 336ELN, Track Groups
CATERPILLAR 330C, Bucket, GP, #3029013/32549CATERPILLAR 345, 345A, 345B, 345B II, 345BL II, 345BL IIVG,
345BL II LR, 345BL LC II, 345BL LR, 345BL ME, 345BL ME II, 345BL UHD, 345CL, 345CL ME, 345CL UHD, 345CL VG, 345CL WVG, 345DL, 345DL ME, 345DL VG,345L, 349DL, 349EL, Track, Steel, #3012287/52976
CATERPILLAR 345B, Engine, #1382001/37356CATERPILLAR 345B, Final Drive, #1362847CATERPILLAR 345C, Bucket, GP, #2516921/51580CATERPILLAR 365B, Bucket, GP, #1754487/49221CATERPILLAR 365BL, Final Drive,#1362956/39647CATERPILLAR 375, 375L, Cab, Other, #1082517/33834CATERPILLAR 375, 375L, 5080, Final Drive, #7Y0884/38294PETERBILT 379, 379EXHD, Truck Components - Engine,
#1802283CATERPILLAR 416C, 416D, 416E, 420C, 420D, 420E, 426C,
Bucket, GP, #1345869/30959CATERPILLAR 416C, 426C, Bucket, GP, #1345865/51492CATERPILLAR 416C, 426C, Bucket, GP, #1366912/51493CATERPILLAR 416E, Bucket, GP, #2511786/51592CATERPILLAR 420D, Bucket, GP, #1181984/52140CATERPILLAR 420F, Bucket, GP, #3377388/51594CATERPILLAR 430E, Booms, #3172486/2935CATERPILLAR 769D, Engine, #1230206/32272CATERPILLAR 773B, Torque Converters, #6T4674/42945CATERPILLAR 773D, Engine, #1314877/40903CATERPILLAR 824C, Differential, #4V1073/31078CATERPILLAR 824C, Differential, #3V4030/31079CATERPILLAR 824C, Transmissions, #3P6809/33473
CATERPILLAR 836, Cab, EROPS, #1293276/2846CATERPILLAR 836G, Engine, #1411778/44901CATERPILLAR 836G, Blade, #1474413/45507CATERPILLAR 836G, Cab, EROPS, #1793710/45412CATERPILLAR 836G, Torque Converters, #1457109/52159CATERPILLAR 928HZ, 930H, Axle, #2571712/49702CATERPILLAR 930G, 938G, Transmissions, #2348866/32134CATERPILLAR 930H, Arm, #2357301/49703CATERPILLAR 950G, 950H, 962G, 962H, 962K, Axle,
#3589581/52959CATERPILLAR 950G, 962G, IT62G, Axle, #1383122/35701CATERPILLAR 950G, 962G, IT62G, Axle, #1383121/35700CATERPILLAR 951C, Transmissions, #2P2040/2963CATERPILLAR 953C, Arm, #8G4021/31702CATERPILLAR 962G, Engine, #1168671/34551CATERPILLAR 962G, Counterweight, #2318853/36042CATERPILLAR 970F, Torque Converters, #1463329/43970CATERPILLAR 973, Equalizer Bars, #3W2208/572CATERPILLAR 973C, Equalizer Bars, #3W8424/31118CATERPILLAR 980C, Arm, #9V6026/3062CATERPILLAR 980C, Cab, EROPS, #8V8914/28500CATERPILLAR 980G, Cab, EROPS, #1097922/47687CATERPILLAR 980G Final Drive, #1605585/8037CATERPILLAR 980G, 980G II, Axle, #1725385/34669CATERPILLAR 980G, 980G II, Counterweight, #1146030/28593CATERPILLAR 980G, 980H, Bkt, Light Material, #1952647/46925CATERPILLAR 980H, Axle, #2327558/34667CATERPILLAR 988B, Torque Converters, #3P8074/51651CATERPILLAR 988B, Transmissions, #9W0782/32318CATERPILLAR 988F, 988F I, Final Drive, #4E2664/43974CATERPILLAR 988G, Cab, EROPS, #1289664/29291CATERPILLAR 988G, 988H, Booms, #2550042/51861CATERPILLAR 988G, 988H, Booms, #2486341/48691CATERPILLAR 988H, Engine, #2256065/52485CATERPILLAR 988H, Cab, EROPS, #2289530/54101CATERPILLAR 988H, Final Drive, #1920822CATERPILLAR 988H, Final Drive, #1920822CATERPILLAR 988H, Torque Converters, #1285303/52676CATERPILLAR 988H, Torque Converters, #1285303/52676CATERPILLAR 992C, 992D, Cab, EROPS, #2V5075/46948CATERPILLAR 992C, 992D, Differential, #1V5944/56923CATERPILLAR 992C, 992D, 690B, Cab, EROPS,
#9V5306/30599CATERPILLAR AP-1000E, AP-1055E, SCREED,
#2518303/53371CATERPILLAR D10, Cab, EROPS, #3T8106/36149CATERPILLAR D10, D10L, Transmissions, #3P7556/31378CATERPILLAR D10L, D10, Torque Converters, #6P6412/31183CATERPILLAR D10R, Equalizer Bars, #2223676CATERPILLAR D10R, MAIN FRAME, #1157395/44976CATERPILLAR D10R, Torque Converters, #1102769/35220CATERPILLAR D10T, Counterweight, #2235568/39840CATERPILLAR D10T, Equalizer Bars, #2223682/54606CATERPILLAR D11, D11N, Torque Converters, #3T9677CATERPILLAR D11, D11N, Track Frame, #6Y2686/54865CATERPILLAR D11, D11N, Track Frame, #6Y2687/54866CATERPILLAR D11N, Engine, #8N9602/49456CATERPILLAR D11N, Equalizer Bars, #2072683
CATERPILLAR D11N, Final Drive, #9W3649CATERPILLAR D11N, Track Frame, #6Y2686 & 6Y2687CATERPILLAR D11R, Equalizer Bars, #2072684CATERPILLAR D11R, Torque Converters, #1210030/47691CATERPILLAR D11R, D11T, Final Drive, #3242343/46124CATERPILLAR D350E, Engine, #1274527/39865CATERPILLAR D350E, Axle, #1290384/40556CATERPILLAR D350E, Axle, #1290385/40557CATERPILLAR D350E, Cab, EROPS, #7U4400/40232CATERPILLAR D350E, Final Drive, #1281048/40688CATERPILLAR D5B, D5B LGP, D5S, D6D, Cylinder, Boom/Lift,
#7J8302/3097CATERPILLAR D5H, Winch, #08929/51595CATERPILLAR D5M, D5M LGP, D5N, Blade, Angle,
#2096089/32261CATERPILLAR D6, D6T, D7, Winch, #2796427/48648CATERPILLAR D6, D6T, D7, Winch, #3710956/51602CATERPILLAR D6,D6T, D7, Winch, #2796427/50943CATERPILLAR D6,D6T, D7, Winch, #3710956/51604CATERPILLAR D6N LGP, Blade, Angle, #2236304/38985CATERPILLAR D6N LGP, Equalizer Bars, #8E0743/40210CATERPILLAR D6N LGP, Torque Converters, #1880502/44386CATERPILLAR D6R, Equalizer Bars, #2012078/31951CATERPILLAR D6R, Equalizer Bars, #2012078/31951CATERPILLAR D6R, Equalizer Bars, #2012078/38992CATERPILLAR D6R, Transmissions, #2192622/52974CATERPILLAR D6R LGP, BRAKE & PLANETARY GRP,
#8E5273/38926CATERPILLAR D6T, Blade, Angle, #3787908/50335CATERPILLAR D6T, Counterweight, #1175695/54092CATERPILLAR D6T, Counterweight, #1Q4324CATERPILLAR D6T XL, Blade, Angle, #3787908/48647CATERPILLAR D7H, Equalizer Bars, #1414690/28344CATERPILLAR D8, D8L, D9N, Torque Converters, #9P4890CATERPILLAR D8H, Torque Converters, #1M3808/36611CATERPILLAR D8H, Transmissions, #5M7987/36604CATERPILLAR D8H, Winch, #31E3778/37027CATERPILLAR D8H, Winch, #31E1067/36601CATERPILLAR D8N, D8R, D8T, Blade, SU, #7T5312/53124CATERPILLAR D8N, D8R, D8T, Blade, SU, #7T5925/48189CATERPILLAR D8R, Torque Converters, #1613304/47690CATERPILLAR D8R, Transmissions, #2192624/47692CATERPILLAR D8R, D8T, Blade, #D8TCB/54790CATERPILLAR D9L, Blade, U, #9J7420/42578CATERPILLAR D9N, Blade, SU, #7T5384/47147CATERPILLAR D9N, D10N, D11N, Cab, EROPS,
#8E1085/48556CATERPILLAR D9R, D10R, D11R, Cab, EROPS,
#1118549/50331CATERPILLAR TH83, Engine, #1182942/49559VOLVO WG42T, Truck Components - Engine, #6I2642/59558GRADALL XL3300, MAIN HYD PUMP, #80333097/52673
836G Cab1793710, Stk# 45412
D6T Track Show Sys 12349705, Stk# 50328
988H Engine GRTO2256065, Stk# 52485
D10R Rebuilt Torque Convertor1102769, Stk# 35220
Page 22 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
see DEMO page 90
Ring Power Hosts Demo Day, PowerGeneration Open House in Orlando
Guests inspect this Cat 980M.
(L-R): Tony Grosso, Ring Power, gives a tour toLarry Sangster, Jeremy Griffith, Daune Griffithand Josh Griffith, all of Wal-Rose Inc.
Guests enjoy a barbecuelunch.
Clay Price, Genie, takes visitors up 180ft. in the air.
A demo day special included this Cat 308E,a Towmaster T-24 trailer and a Yeti cooler.
Gary Ritchie, SCS, checks outthis Genie 180 ft. (54.9 m)reach machine.
The Weiler road widener draws attention from attendees.
Hundreds of visitors were in atten-dance at Ring Powers OrlandoDemo Day and Power GenerationSystems open house. The one-day eventplaced an emphasis on equipment demon-strations, the companys Power GenerationSystems division and showcasing servicesthat Ring Power has to offer.
Exhibits of various Ring Power divi-sions as well as equipment from some of itssuppliers included Rosco, LeeBoy, Weiler,Grove, Towmaster Trailers and Genie per-sonnel lifts. Attendees had the opportunityto operate various pieces of equipment inthe demonstration area and participate inoperator events with a Cat mini-excavatorand a Cat track loader. One of the mostpopular equipment demonstrations was theGenie personnel lift, which took visitors180 ft. (54.9 m) in the air.
The event also featured a barbecuelunch, door prizes and tours of RingPowers Orlando facility.
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 23
Page 24 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
Flint Equipment Companywith 17 full-service branch locations in Alabama, Georgia and South Carolina
Office: 404-691-9445Contact: Justin Murray [email protected]
Your John Deere Dealer Serving Our Customers for 45 Yearswww.flintequipco.com
2007 Hitachi ZX240LC3, Stk F563335, S/N FF01V1Q021296, 4920 Hrs, Cab w/AC,Med. Arm, Standard Boom..........$107,000
2012 John Deere 624K, Stk F567445, S/N1DW624KPTBD640585, 1649 Hrs, Cabw/AC, Quick Coupler ..................$142,000
2006 John Deere 700J LT, Stk F567320,S/N T0700JX127395, 3626 Hrs, Cab w/AC,Lever Steer, Long Track ................$75,000
2006 Hitachi ZX650LC3, Stk F567597, S/NFF01J9Q020076, 6552 Hrs, Cab w/AC,Long Track, Counter Wt Removal$218,000
2013 John Deere 544K, Stk F569882, S/N1DW544KZPCE649811, 527 Hrs, Cabw/AC, 3 Spool, Aux Hydraulics ..$172,000
2010 John Deere 450DLC, Stk F556899,S/N FF450DX913885, 3466 Hrs, Cabw/AC, Med. Arm, Long Track ......$221,000
2007 John Deere 850J LT, Stk F567323,S/N T0850JX134226, 4254 Hrs, Cab w/AC,Lever Steer, Long Track, Hydrostatic Trans....................................................$137,000
2009 Hitachi ZX210F-3, Stk F567855, S/NFF00BHF210003, 6889 Hrs, Cab w/AC,Cab Riser, Wide Track ................$165,000
J.H. Williams Oil Co., Inc. has been in the fuel business for over 70years. With bulk facilities and truck fleets headquartered in bothTampa and Bradenton, Fl. We offer a competitive advantage when itcomes to price and location. Also, because we are a family ownedcompany (in its 4th generation) we offer exceptional customerservice. You will always speak to a live person when you call toplace an order, and you will have a sales person who personallytakes care of your account. Your needs are our needs!
Whether you are committed to a short term construction project inour area, or you are in need of an ongoing supply of commercialfuel, your satisfaction is our numberone goal. With six quality brands:Shell, Chevron, Texaco, Citgo,Marathon, and Sunoco, as well asa variety of unbranded supplyoptions, we have something foreveryone.
Please visit our website atwww.jhwoil.com to learn more.
Are You in Need of a Fuel Supplier?
Serving Central FloridaGive us a call so we can start building a relationship today!
J.H. Williams I.V.(813) 601-6388
Larry McGary(941) 720-3843
We have the ability to monitor your fuel using Automatic Tank Gauges. This technology ensures accurate and timely deliveries.
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 25
Demolition & Recycling
2006 Volvo EC460BLC and GenesisGXP660R 2006 Volvo EC460BLC with 9,500 hours,equipped with a Genesis GXP660R Mobile Shear w/360 rotation. Only 800 hours on a NEW ENGINE, only500 hours use on shear since a complete Genesisfactory rebuild, 2500 hours on NEW hydraulic pump..........................................................Call for Price.
2009 Cat M318D MH with Grapple 6735 Hrs,Hydraulic Elevating Cab, FOPS Cab Guarding, Heat& A/C, 36 MH Front w/Drop Nose Stick, AutomaticGreasing System, Cat GSH15B 5 Tine (3/4 yd3)Grapple w/360 degree rotation, Outriggers x4, andDual Solid Tires, Checked through Cat Dealer Shop,1000 Hour Cat Service Completed and Work Ready.Fob Summerville, SC ......................Call for Price.
2002 Komatsu PC450LC-6 UHD 5,650 original hours,25 meter/82 ft 3 Piece Ultra High Reach DemolitionArrangement + Standard Digging front w/ HD Bucket, Bothfronts fully plumbed for Rotating Shear or ConcreteProcessor, FOPS Cab Guarding, Heat & A/C, Video CameraSystem, Variable Gauge U/C @ 75%+ remaining. Very goodall-around condition and appearance. Can go straight towork!!! ............................................................................................................................................................Call for Price.
2006 Cat 330DL with Labounty MSD2500R5450 Hrs, Auxiliary Hydraulics, Cab Guard, Heat& A/C, Good U/C, Equipped w/a Factory RebuiltLabounty MSD2500R Mobile Shear w/360 Rotation & Factory Warranty, Checked throughthe Shop, Serviced and 100% Work Ready. Fobour Yard in Summerville, SC ..........................................................................Call for Price.
2008 Deere 240DLC and GenesisGMS400R 2008 Deere 240DLC with 6,100hrs, equipped w/ Genesis GMS400R MobileShear w/ 360 rotation & XP upper jaw, CabGuard, Heat & A/C, and excellent U/C.Approximately 2000 hours total use on shearsince complete Genesis factory rebuild..........................................................Call for Price.
QUALITY USED DEMOLITION & RECYCLING EQUIPMENT
WE HAVE ATTACHMENTS FOR YOUR EVERY NEED
1050 Drop Off Drive Summerville, SC 29483 (843) 873-8333 after hours: (843) [email protected]
KUHNEQUIPMENT.COM
2006 Cat M322C MH with Grapple11,201 Hrs, Hydraulic Elevating Cab, Heat &A/C, MH Front w/20 Long Stick, 12.5 kw Generator System, Outriggers x4, and DualSolid Tires, Equipped w/HGT (1 yd3) 5 Tine Orange Peel Grapple w/360 rotation, VeryClean Machine that was Cat Dealer MaintainedSince New, Checked through Shop, Cat 1000Hour Service Completed, and 100% WorkReady. Fob Summerville, SC Call for Price.
2006 Hitachi ZX270LC-3 with 6600 Hrs,Cab w/Heat & A/C, Cab Guarding, Very GoodU/C and Equipped w/ LaBounty MSD2000RSaber Series Mobile Shear w/360 Rotation.Less than 250 Hour Use Since Complete Rebuild of Shear and All Components. ThroughShop and Work Ready. ........................................................Available for Sale or Rent.
Shears Pulverizers Processors Grapples Generator Sets
SOLDSOLD
Page 26 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
> > >
AN E.P.I.C. GENERATION
EFFICIENT
POWERFUL
INTELLIGENT
COMFORTABLE
DEALER IMPRINT AREA
DEALER IMPRINT AREA
DEALER IMPRINT AREA
SCOTT-GALLAHER INC.www.scott-gallaher.com8071 Lee Hwy. Troutville, VA 24175540-992-4560
SalesService
PartsRentals
ZZZHIFLHQF\VKRULQJFRP
Steel Trench Shields
Floridas COMPLETE Factory-Direct Rental Resource
Slide Rail System Build-A-Box
TE Factor
ACTOR FFACTORY-DIRECT Sales & Rentalas COMPLEFlorid
Rental Resource Largest selection of USA-made trench
shielding and shoring equipment. Custom shields built to your specs. JQLUHHQLJQ(FLFHS6HWL6
y-Direct
ACTORY-DIRECT Sales & RentalTE Factor
Largest selection of USA-made trench shielding and shoring equipment.Custom shields built to your specs.
ACTORY-DIRECT Sales & Rental
JQLUHHQLJQ(FLFHS6HWL6 RU3\FQHLFII(PRUIWUUWRSSX6
Special Operations Shoring Division. raining.Safety Trench TOSHAA T
VQRLWFXGSpecial Operations Shoring Division.
raining.
rench ShieldsT Steel
MIAMI(954) 332-7700
MTA(813) 248-2495
\FQHLFIIHZZZ
Build-A-Box
PAM(813) 248-2495
ORLANDO(407) 854-9949
PRFJQLURKV\
Slide Rail System
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 27
Page 28 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
Equipment Abounds at Linder Oktoberfest Events in Fla., S.C.
Equipment on display at the Oktoberfest event.
(L-R) are Joe Miller of Miller BrothersGiant Tire; Andy Agoos; and Johnny Bassof Swell Construction.
Paul Shevlin (L) of Geith goes over some of theproduct offerings with Adam Dilg of Vallencourt.
(L-R): Randy Thomas of Linder talks with SteveFuist and Steven Pepper, both of RIPA, and RussellPercy of Wirtgen.
The event featured a demo of a Kleemannscreening machine.
Oompah music, German foodand equipment displays greet-ed visitors to Linder IndustrialMachinerys annual Oktoberfest cele-bration. This year, the events wereheld at the new branch facility inOrlando, Fla., and Columbia, S.C. Large tents were set up for
Linders suppliers to showcase theirequipment. Outdoor exhibits includ-ed Komatsu equipment; Wirtgensmilling machines, pavers, com-paction equipment and crushingequipment; Etnyre distributors; andAtlas material handling excavators.A demonstration also was held of aKleemann screening machine.The event also provided an oppor-
tunity for manufacturers to explainthe benefits of working with Linder.KoneCranes recently entered into anagreement with Linder. Our parent company,
KoneCranes is known for the over-head crane business, said PhilStevens, KoneCranes. We haveabout 60 percent of the U.S. marketfor that product, so now we are devel-oping the lift truck division in theNorth American market. Overallglobally, we are actually number twoin the overall size of the business. Wewill probably build somewhere in theregion of 750 units this year. Linderis currently renting, leasing, and sell-ing KoneCranes lift trucks rangingfrom 15 to 80 ton capacity.Stevens said the support Linder
provides is a significant factor in theirbusiness relationship. Its a proper relationship based on
the fact that they have invested instock, so we can take machines outfor demo and that means a lot. Theyhave also invested heavily in the sup-port side of things because withoutthe support of the machines that canlet you down in a big way in thisindustry. The support system is some-thing Linder invested well into aswell. I am more than pleased with theway things are going and the direc-
tion we are going into and we expectto grow the business into some otherareas as well expanding along withthem as they expand their businesstoo. We have kept some areas openfor that expansion to happen as well.Fil Filipov, owner of Atlas Crane,
also took time out from theOktoberfest to discuss his company,and how it has benefited by workingwith Linder. Atlas is a German company. It has
three large manufacturing facilities inGermany. Around 500 people workfor the company. We are producingarticulated cranes and excavatorsfrom 14-ton up to 80-ton with rail-road version of it, material handlerswith wheeled excavators as well ascrawlers.Atlas has been around since 1919,
1918 in Germany, said Filipov. Itsvery reliable brand. We are wellknown in the market. My business ismainly Germany and the Euro zone,so now we are expanding into theUnited States.Filipov believes Linder will help
his company expand. Linder will mainly be handling
the material handling equipment.Atlas has a full line of attachments,buckets and everything else that oneneeds for the machine.We are establishing a very
good relationship with Linder,said Filipov. They are a superorganization. We obviouslyhave to fight for our marketshare in the United States andwe are establishing U.S.required machines, as we allknow the U.S. market requiresdifferent safety and differentconfigured machines, so we arereally working very well withthem.Linders new 22,000 sq. ft.
(2,043.9 sq m) Orlando facility,located at 23 Taft Vineland Rd.,sits on five acres and includes a
Guests enjoy the oompah band.
see OKTOBERFEST page 40
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 29
Mon-Fri7:30-5:00
Sat8-12
JACKSONVILLE LOCATION103 BRYAN STREET
JACKSONVILLE, FL 32202
904-354-5746
FAX: 904-355-1891
POLK CITY LOCATION600 N. COMMONWEALTH AVE.
POLK CITY, FL 33868
863-984-6262
FAX: 863-984-6363
RENTALS, SALES, SERVICE, PARTS, COMPRESSORS, GENERATORS, LIGHT TOWERS, ABRASIVE BLASTING EQUIPMENT, DUST COLLECTORS, AIR DRYERS, DEHUMIDIFIERS, MANLIFTS
1997 JCB 215E Series 3, 4x4, 4&1 Bucket,Heat & Air ..........................................$24,800
Case 855D Crawler/Loader, 4&1 Bucket,Undercarriage 50% ............................$23,500
1999 Chevrolet 3500 HD Service Body w/Crane............................................................$9,995
Page 30 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
PAVE WITH PRIDEThe F1000 paver low deck, full visibility and exceptional accuracy for a high-quality mat worth bragging about.
Please contact your local Atlas Copco distributor. www.atlascopco.us
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 31
T O U G H W O R L D . T O U G H E Q U I P M E N T.www.liugongna.com
Rugged terrain, extreme climates, remote locations.
LiuGong machines are developed to excel in the
toughest conditions which makes them your true
reputation builders.
WE NOT ONLY GO TO EXTREMES, ITS
WHERE WE DO OUR BEST WORK.
W T O EXTREMES, E
W E N O T E X XT R E
T O N LY G
E M E S LY G LY G
Y G GOITS
LiuGong machines ar
eme climates, rRugged terrain, extr
e developed to excel in the LiuGong machines ar
emote locations. eme climates, r
T O EXTREMES, E
O e developed to excel in the emote locations. O
E XT T R E
W H E O U R B E BE OUR
E M E S ,
R E W E E S T W OEST WO
, ,
ITS E DO O R K . ORK.
.liugongna.comwwwT O U G H W O R L D . T O U G H E Q U I P M E N T
.eputation buildersr
toughest conditions which makes them your true
LiuGong machines ar
.liugongna.comT O U G H W O R L D . T O U G H E Q U I P M E N T
toughest conditions which makes them your true
e developed to excel in the LiuGong machines ar
.T O U G H W O R L D . T O U G H E Q U I P M E N T
toughest conditions which makes them your true
e developed to excel in the OUR
BEST WORK.OUR
BEST WORK.
BEST WORK.
Page 32 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
2003 John Deere 450H, 2077 Hrs ....................$32,900
Case 586 Forklift, 4WD ............................................$18,000
2003 Daewoo G25, Whse F/L5k Lb, 2650 Hrs..........$14,900
600S JLG Man Lift ....$40,200
2003 Coleman 150 KWGenerator ..................$24,500
2006 JLG G6-23A All TerrainForklift........................$32,500
2003 Lull 644E-42, 5440 Hrs....................................$28,800
2005 Ford F-650 Box DumpTruck, 5-6 Yards, 34,000Miles ..........................$33,800
2003 Takeuchi TB-016 MiniExcavator, 1627 Hrs ..$13,200
2003 JLG 860SJ, 4481 Hrs ......................................$75,900
2006 Freightliner, 400,000Miles ..........................$38,000
2003 Takeuchi B-125 MiniExcavator, 2600 Hrs ..$16,995
Richbourgs Used Specials
1500 Lucas St.Florence, SC 29501
www.richbourgsrentals.com
Marty Squires843-496-9703
SOLDSOLD
H&E EquipmentServiceswww.he-equipment.comARLittle Rock501-568-7867800-632-0577Springdale479-927-1672888-200-6343LAAlexandria318-443-7173800-249-8485 Baton Rouge225-356-6113800-872-1305 Bossier City318-746-5272800-643-2844 Broussard337-837-9600877-463-9914 Kenner504-467-5906800-203-1869 Sulphur337-528-2661800-258-1614
Linder IndustrialMachinerywww.linderco.comFLFt. Myers239-337-1313Jacksonville904-786-6710Ocala352-629-7585Orlando407-849-6560Pembroke Pines954-433-2800Plant City813-754-2727West Palm Beach561-863-0570NCArden828-681-5172Charlotte704-376-7554Greenville252-695-6200Greensboro336-665-0110Raleigh919-851-2030Wilmington910-254-2031
SCGreer864-877-8962North Charleston843-552-0095West Columbia803-794-6150
Lyle Machinery Co.www.lylemachinery.comMSColumbus662-243-2152Hattiesburg601-296-7556Jackson601-939-4000Magnolia601-783-2111Saucier228-832-7575
Power Equipmentwww.powerequipco.comMSSaltillo662-869-0283TNChattanooga423-894-1870Kingsport423-349-6111Knoxville865-577-5563LaVergne615-213-0900Memphis901-346-9800
Every Komatsu Tier 4 construction machine comes standardwith Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:
Lower your cost of ownership Increase equipment uptime and reliability Protect the value of your Tier 4 capital investment
Its just part of our Program designed to deliver complete service and support solutions to Komatsu customers.
To learn more about Komatsu CAREcontact your Komatsu distributor or scanthis QR code with your smart phone.
GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
SOUTHEAST KOMATSU DISTRIBUTORS
T M
s
W
8
8
8
H
W
8
8
W
8
B M
P
2
I
F
8
A
8
O
Bomag Americas Inc. announcedplans for product manufacturing tran-sitions to its new North Americanheadquarters in Ridgeway, S.C. InAugust 2015 Bomag will begin transi-tioning its Cedarapids asphalt pavingand CMI reclamation/stabilizationequipment production from the currentOklahoma City, Okla., facility.
Our strategy provides a NorthAmerican epicenter for operations inSouth Carolina and positions us forsustained growth and competitivenessin our markets, said Walter Link,president of Bomag Americas Inc.This is a very exciting era in the evo-lution of Bomag and the FAYATgroup.
Rob Mueckler, vice president ofsales of Bomag Americas, said, Theinfrastructure advantages will con-tribute to new processes and expandsupport and service to our paving androad building customers. Cedarapidsand CMI are both well respectedbrands in the industry, and we look for-ward to continuing to provide this
equipment to our customers.Equipment manufacturing transition
from Oklahoma City to Ridgeway isexpected to be completed by October2015. For the paving equipment line,this transition includes the CedarapidsCR300, CR400, CR500 and CR600Series pavers, CR662RM RoadMixmaterial transfer vehicle, MS Series ofmaterial transfer devices and Fastach
and Stretch screeds. On the asphaltrehabilitation side of the business, thetransition includes CMIReclaimer/Stabilizers.
For more information, call 309/853-3571 or visit www.bomag.com/us.
(This story also can be found onConstruction Equipment Guides Website at www.constructionequipment-guide.com.)
Bomag Makes Additional Investmentin Its New Facility in Ridgeway, S.C.
In August 2015, Bomag will begin transitioning its Cedarapids asphaltpaving and CMI reclamation/stabilization equipment production fromthe current Oklahoma City, Okla., facility.
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 33
Komatsu CARE for Komatsu Tier 4 Interim models is a new, complimentary maintenance program designed to lower your cost of ownership and improve your bottom line. It provides factory-scheduled maintenance on the machines for the first three years or 2,000 hours, whichever comes first. This includes up to two exchange Komatsu Diesel Particulate Filters. Be sure to contact your Komatsu distributor for all the details.
Once again, Komatsu leads the industry. No other construction equipment manufacturer offers a complimentary maintenance program like this.
Its what youve come to expect from the service experts at Komatsu.
www.komatsuamerica.com
.komatsuamerica.comwww
.komatsuamerica.com
T M
.komatsuamerica.com/komatsu-carwww
e .komatsuamerica.com/komatsu-car
Rish Equipment Companywww.rish.comMDFrostburg301-689-2211VABealton540-439-0668Chesapeake757-485-2100Chester804-748-6411Coeburn276-395-6901 Salem540-380-2090Staunton540-887-8291WVBeckley304-255-4111Bluefield304-327-5124Bridgeport304-842-3511Logan304-752-9313St. Albaus304-755-3311
Tractor & EquipmentCompanywww.tractor-equipment.comALAlabaster205-621-2489Anniston256-831-2440Birmingham205-591-2131Decatur256-355-0305800-321-6865Dothan334-678-1832Mobile251-457-8991800-233-7213Montgomery334-288-6580800-832-9563Tuscaloosa 205-752-0621Tuscumbia251-275-4159FLPanama City850-763-4654Pensacola 850-505-0550GAAlbany229-435-0982800-733-0962Augusta706-798-7777800-659-3090Calhoun706-879-6200800-827-3072Columbus706-562-1801877-307-6439Forest Park404-366-0693Hoschton706-654-9850888-334-9850Kennesaw678-354-5533Macon478-745-6891Savannah912-330-7500800-827-1405
Page 34 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
Visit www.sealsaver.comfor more information or contact us at
1-800-683-5189
Exclusively manufactured by:
Fluid ControlServices, Inc.
1155 Allgood Road Suite 15Marietta, GA 30062
1-800-683-5189Fax: 770-509-5832
SEAL SAVER has proven effective inConstruction, Mining, Waste Management,Quarries, Refineries, Marinas, Recycling,Wood Products Processing, Steel Mills
and Hot Slag Industries.
SatisfactionGuaranteed!
SEAL SAVER PROTECTIVECYLINDER COVER
KOMATSUD65EX-15
STOP the never ending cycle of cylinder repairs.
Made inthe USA
The SEAL SAVER WILL:Protect cylinders from the elements
Eliminate dings and dents from fallingdebris Reduce particle contamination of hydraulic systems Prevent pitting
due to chemical washes Extend the lifeof cylinder seals Eliminate rod scoring
SPECIALTRUCK SALE
Nextran Truck CenterCall Mike Graber
800-347-6225 Cell: 904-813-4512 Fax: 904-354-3807
Isuzu 2005 Used Gas NPR, 8900 Miles!!! 12 Flatbed with Hoist,Reese Hitch and Fifth Wheel Hitch! Like New!
Isuzu NPR-HD with Aluminum Dump Body, Over 6000 lbs ofPayload!
2015 Mack Dumps In Stock! Tandems and Tri-Axles Isuzu NPR-HD with Tool Body, 2 in Stock, Gas and Diesel
The American Road & Transportation BuildersAssociation (ARTBA) announced the election of its 2014-2015 officers during the associations national convention,held Sept. 7 to 9, in Rancho Palos Verdes, Calif. Theyinclude:
Chairman:Nick Ivanoff, president and CEO, Ammann& Whitney, New York, N.Y.
Senior Vice Chairman: David S. Zachry, president andCEO, Zachry Construction Corporation, San Antonio, Texas
First Vice Chairman: Bob Alger, president and CEO,The Lane Construction Corporation, Cheshire, Conn.
Northeastern Region Vice Chairman:Dave Gehr, sen-ior vice president, Parsons Brinckerhoff, Herndon, Va.
Southern Region Vice Chairman: Tom Elmore, presi-dent, Eutaw Construction Company, Aberdeen, Miss.
Central Region Vice Chairman: Kathi Holst, presi-dent, Roadway Construction and Maintenance Services,Warrenville, Ill.
Western Region Vice Chairman: Steve McGough,chief operating officer, HCSS, Sugarland, Texas
Vice Chairman At-Large: Ward Nye, president andCEO of Martin Marietta Materials, Raleigh, N.C.
Vice Chairman At-Large: Scott L. Cassels, president,Kiewit Infrastructure Group Inc., and executive vice presi-dent, Kiewit Corporation, Omaha, Neb. Vice Chairman At-Large: Paul Acito, vice president
and general manager, Traffic Safety & Security Division,3M, St. Paul, Minn. Vice Chairman At-Large: Melissa Tooley, director,
University Transportation Center for Mobility, TexasTransportation Institute at Texas A&M University in CollegeStation
Vice Chairman At-Large: John Kulka, consultant, HRIInc., State College, Pa.
Vice Chairman At-Large: Mike Donnino, senior vicepresident, Granite Construction Company, Lewisville, Texas Secretary: Pete Ruane, president and CEO, ARTBA,
Washington, D.C. Treasurer: Tom Hill, president and CEO, Summit
Materials LLC, Denver, Colo.(This story also can be found on Construction Equipment
Guides Web site at www.constructionequipmentguide.com.)
ARTBA Announces2014, 15 Officers
Keep Up With All the
Industry News, Subscribe to
ConstructionEquipment
Guide Today!Toll Free
800/523-2200
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 35
Page 36 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
All Equipment is subject to availability and is located at our Marine Facility Located in Brunswick Ga and other
locations throughout Florida.
Crane Trestle System for Sale/RentSteel Crane Trestle System (38 width x 40 span length, 10 spans available)Heavy duty structural steel substructure (pile cap and trusses) designed to work with 36diameter supporting pipe pile and 12x5x20 timber crane mat decking. Pipe pile and cranemats can be supplied separately upon request. This system is designed to support large crawler cranes (up to 300 ton capacity) or excava-tors requiring a temporary work platform over land or water.System is available for rent or purchase. System components are easily shipped via standard
trucking. Barge load out/delivery is also available fromour Marine Facility located in Brunswick, GA on theEast River.Substructure design drawings can be provided as part ofthe system. Turnkey supply and installation can also beoffered depending on location.
Equipment / Marine Facility for Rent or Charter
25x14 T/screw 15 helm (Lil Rita) w/sleeping quarters 20KW Genset setup w/ anchorwinch for dredge tender
25x12 T/screw 10 helm (Lil Lola), w/ anchor winchfor dredge tender
(6) 60x12x4 Sectional barges w/spuds Crawler Cranes from 50 150 ton. (3) CAT324 DLR Long Reach Excavators 300 of Commercial Dock available for lease Crane & Barge loading services available
SAVE TIME SAVE MONEY SAVE LABOR SAVE OIL
No tools required No expensive
hardware needed No more rags
stuffed into hoses No more messy
plastic caps The ultimate
contamination control tool One hand installation Eliminate hydraulic
oil spills & clean up Quick installation
& ease of usage Safe for personnel
& environment Industry acclaimed 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
Proposed Expansion of EPA Authority Carries Consequences inition moves forward, the EPA wouldreclassify ditches and other landscape fea-tures that occasionally carry water as tribu-taries to navigable waterways as if ariverboat is going to plot a course through apuddle in your front yard. It would make theagency the nations chief land manager able to regulate development, farming, min-ing and other activity in large swaths of thecountry.The EPA has repeatedly dismissed the
concerns of small businesses, declaring thatthe dramatic expansion of the waters defi-nition will have no negative economicimpact. This assessment cannot be correct.Increased regulation equals greater costs upand down the supply chain. As the suppliersof critical equipment for the construction,mining, farming and other heavy industries,our members understand that increased costsresult in fewer projects, smaller revenue anda dismal outlook.The proposed expansion of EPA authority
carries a variety of consequences for indus-try: The rule would make most ditches into
tributaries. Routine maintenance activitiesin ditches and on-site ponds and impound-ments could trigger permits that can cost$100,000 or more. These permitting requirements would
likely trigger additional environmentalreviews that would add years to project com-pletion time and often require costly restora-tion/mitigation projects. The proposal would likely also result in
more stringent storm water managementrequirements, which would affect retailers,companies with large parking lots, big boxstores, etc.Beyond the negative business impacts of
the proposed rule, AEDs comments high-light that in drafting it the agency failed tofollow existing law on numerous counts.The result is bad for business, useless inservice of the environment and ignorant oflegislative, judicial and regulatory mandates.Not only is the proposal wrong, it is illegal.For more information, visit www.aed-
net.org.(This story also can be found on
Construction Equipment Guides Web site atwww.constructionequipmentguide.com.)
WATER from page 1
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 37
Handle More.Liebherr has been precision-engineering efficient technologies for decades, and our LH 40 material handler is no exception. It features an energy recovery cylinder that reduces fuel consumption by up to 25 percent and promotes faster cycles for greater handling capacity. And our handlers are industry-proven to deliver long life. We know material handling and we have a long history of developing specialized attachments, booms and sticks for this industry.
We havent compromised on anything; why should you?
liebherr.com
LOUISIANA
Heavy Machines Inc. www.heavymachinesinc.com
SORRENTO(225) 675-6867 (866) 716-9307
MARYLAND
Liebherr Equipment Source www.liebherrequipmentsource.com
BALTIMORE(410) 379-3994(866) 760-3101
NORTH CAROLINA
Liebherr Equipment Source www.liebherrequipmentsource.com
RALEIGH (919) 329-0080(866) 362-0970
RECO Equipment Inc. www.recoequip.com
CHARLOTTE(704) 399-7555
TENNESSEE
Heavy Machines Inc. www.heavymachinesinc.com
MEMPHIS(901) 260-2310 (800) 432-8902
VIRGINIA
Liebherr Equipment Source www.liebherrequipmentsource.com
MANASSAS(703) 392-0111(800) 838-7534
NEWPORT NEWS(757) 926-5124(855) 474-7925
Atlantic Equipment & Supply www.aeandsupply.com
HAMPTON(757) 827- 4778(800)-325-0461
Page 38 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
T THE MUST T-A A NT F TTEND EVENT FOR TTEND EVENT FOR
K AND BE CK INDUST
BA& THE IN
RIZED AUTHORI T THE MUST T-A A
THAN EV ETTER T OP SUP O
ENT D & THE INDUSTRYS T
EQUIPME NT F TTEND EVE
CK AND BETTER THAN EVER! OP SUPPLIERS IS
AUTHORIZED EQUIPMENT DEALERS TTEND EVENT FOR
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 39
Page 40 November 26, 2014 www.constructionequipmentguide.com CONSTRUCTION EQUIPMENT GUIDE
Guests Check Out Linders New Branch Facility in Orlando at Event
This year, the event was held at its new branch facility in Orlando, Fla.
Fil Filipov (L), owner and chairman of Atlas Crane, & Bagger, andBrahim Stitou, managing director stand in front of one of theirmachines.
(L-R): John Sharp of Hubbard construction talkswith Steve Ricke and J. Johnson, both of Wirtgen.
(L-R): Rick Sweet (L) and Ian Gianetti (R),both of Hubbard Construction, talk with AlCasey, Wirtgens Rhino division.
Hank Bolding of Linder and event staff pass outdoor prizes.
Justin Barlanti (L), Linder KoneCranes specialist, and Phil Stevens,north region director, KoneCranes, talk about their partnership.
The German food was a big hit with guests.
service area with six bays. Two overheadcranes service each bay. The facility alsoincludes a 3,000 sq. ft. (278.7 sq m) trackshop, a full hydraulic shop with cylinderpress, a state of the art wash bay, morethan 5,000 sq. ft. (464.5 sq m) of partsstorage and office space.
We are very pleased to see the reac-
tion of the customers to the new facilityand the services we are able to provide,said John Coughlin, president of LinderIndustrial Machinery Company. Thecomplete track shop, cylinder press forhydraulic cylinder repair work, completewash and recycling capability, the over-head cranes are all the features of a mod-ern facility that lend themselves to meet-ing our customers needs. This facility
gives us the ability to go above andbeyond what the customers expectationsare with our factory-trained technicians.The state-of-the-art tooling and facilityallow us to be in a very aggressive posi-tion from this point forward.
(This story also can be found onConstruction Equipment Guides Website at www.constructionequipment-guide.com.) CEG
Attendees visit the Allied booth.
OKTOBERFEST from page 28
CONSTRUCTION EQUIPMENT GUIDE www.constructionequipmentguide.com November 26, 2014 Page 41
*-
,"
J79;;HI7BJ?MJ>=?B;
B?>M:?B7L
I7BI;?BFFKI;B
JI
The new W 220 cold millingmachine from Wirtgen AmericaInc. rounds out the lineup of high-performance large cold mills fromWirtgen Group, providing thecapabilities of Wirtgens largestmachine in a lighter-weightmachine that can be readily trans-ported.The W 220 provides the milling
width and depth of the heavier W250i Wirtgens biggest andmost powerful mill but with alower weight that enables it tomore easily meet legal weight loadlimits. The W 220 like the W250i will mill up to 14 in. (35.5cm) deep, at a nominal millingwidth of 87 in. (221 cm). Its powerplant provides 766 hp, with anoperating weight of 80,160 lb.(136,360 kg). The W 220 can pro-duce up to 900 tons (816 t) perhour of reclaimed asphalt pave-ment (RAP).The Wirtgen W 220 can remove
asphalt layers more than 1 ft. (.3 m)deep and tough portland cementconcrete pavements as well at ahigh advance rate. Three differentmilling drum speeds can be adjust-ed from the operators platform:high speed for large-scale millingof thin lifts, medium for standardsurface courses and low speed foroptimized fuel consumption andlow cutting tool wear.While the W 220 comes with a
standard 87 in. milling drum width,via the optional FCS Light system,a 98-in. (249 cm) drum can be fit-ted. FCS Light also permits easyexchange of drums with standardtool spacing with those of wider ortighter tool spacings. The standard milling width of
the W 220 can be extended withadditional milling drum units forworking widths of 8.2 ft. (2.50 m),10.2 ft. (3.10 m), 11.5 ft. (3.50 m),12.5 ft. (3.80 m), up to a maximum14.4 ft. (4.40 m).In addition to removing com-
plete pavement sections in a singlepass, the W 220 permits individuallayers to be removed very econom-ically. The intelligent WIDRIVEmachine management system andthe three selectable milling drumspeeds keep operating costs verylow for a cold milling machine inthis performance class. The W 220 operating platform
provides the operator with an opti-mal work environment, whichspeeds productivity and providesan abundance of operating infor-mation. Part of this intuitive oper-ating environment a multifunc-tional control display operatesas a practical information hub. Itcan be swung to the left or right ofthe operator together with theLevel Pro control panel and dis-
plays operating status and servic-ing data in an easily comprehensi-ble way.The control display provides
user-friendly diagnostic optionswith clear graphics for identifyingthe source of any problem. Anotherhandy function is the logging ofjob data: at the end of the day, thelog can show how many truckshave been loaded and the overalltonnage achieved.The new W 220s parallel-to-
surface (PTS) system automatical-ly aligns the cold mill parallel tothe road surface. The systemensures simple, accurate operationof the machine in demanding pro-filing jobs. PTS also assists theoperator with positioning themachine in the milled cut to initiate
the milling process. In automaticmode, the system takes care of allthe steps that the operator wouldotherwise need to select manuallyone after another; the need for rep-etitious manual correction is elimi-nated.The operator activates the inte-
gral Level Pro control system atthe flick of a switch, and all fourcrawler track units of the largemilling machine are loweredsimultaneously at high speed.When the milling drum unit reach-es the surface to be milled, the low-ering speed is reduced and themilling drum slowly penetrates thematerial down to the set depth. Theautomatic process helps to preventexcessive cutting tool wear or eventool failure when commencing the
milling operation.The same applies when the W
220 is aligned transverse to thedirection of travel. In many cases,cold milling machines need toovercome significant differences inheight when being moved into orout of the milled cut. The integrat-ed four-fold, full-floating axle bal-ances out all four track units quick-ly and reliably to reduce themachines lateral inclination to aminimum. This lends a highdegree of stability to the largemilling machine, according to themanufacturer.The W 220s intelligent speed
control (ISC) system ensures max-imum traction.