Specification GraDe SeaLeD DownLiGhtS - Kenall Manufacturing

Sealed Specification Grade Downlight Luminaires

DL

Specification GraDe SeaLeD DownLiGhtS For Demanding/High Performance Applications

high abuse healthcare cleanroom/containment transportation

2

The Kenall product shown on this page is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

www. kenall.com P: 800-4-Kenall Email: [email protected] 1020 Lakeside Drive Gurnee, Illinois 60031

Table of Contents

Why Kenall? 2

Typical Downlight Applications 3

Kenall's Sealed Downlight Family 4

What's New: 4" Downlights 5

Sealed Regressed Lens Downlight Series 6-9

Application Comparison: Regressed vs Flush 10-11

Sealed Flush Lens Downlight Series 12-15

Complementary Products 16-17

Product Selection Tables 18-20

Listings and Certifications 21

Kenall Quality Assurance & Warranty Information 22

Additional Product Literature 23

Why Kenall for Sealed Downlights

Kenall is pleased to announce the exciting expansion of our popular specification grade sealed downlight series to include 4" round and square regressed sealed lens downlights. The series features architectural aesthetics and durable, sealed construction.

With performance standards that include ingress protection and NSF2 listings, these sealed downlights are impervious to dirt and bugs and built to withstand rigorous cleaning protocols. They offer a low power, energy efficient LED source, without sacrificing the optical performance of existing specification grade fixtures. Their adherence to the strict MIL STD 461F means that they can be used safely around the perimeter of surgical and MRI imaging suites, without interfering with sensitive electronic equipment.

From highly corrosive transportation environments to healthcare applications that require a sealed plenum, if your project calls for specification grade, sealed downlights, you can rely on Kenall for exceptional performance.

3



Millenium™ High Abuse Kenall's Millenium downlight series offers an architecturally inspired, flush lens family of downlights suitable for a wide variety of unsupervised settings and high abuse applications, with features that include ingress protection listings and our exclusive Peace of Mind Guarantee®.

Luxtran™ Transportation Ideal for transportation applications such as platform and general area lighting, Kenall’s Luxtran downlight series offers features that include 18-gauge type 304 stainless steel trim and high impact lensing options.

typical applicationsWe're confident you'll find Kenall's dynamic family of downlights versatile enough for specification in traditional market segments, as well as a viable alternative for other specification grade downlight applications.

MedMaster™ Healthcare Kenall's MedMaster flush and regressed lens downlights, ideal for surgical and MRI suites, offer MIL-STD-461F certification, providing protection from electromagnetic interference (EMI) or susceptibility to magnetic pulses.

SimpleSeal™ Sealed Enclosure The SimpleSeal flush lens downlight family has been specifically designed for cleanrooms and laboratories, as well as other environmentally demanding, technology-based applications, with features that include IP65 ingress protection, NSF2 cleanability and a MIL-STD-461F option for EMI protection.

4



Millenium Edge™ Downlights (MR13FF Series) The Millenium Edge is ideal for retrofit applications and is available in 13- and 17- inch dimensions, offering:

• 3" Low profile or 6" deep profile surface mount options• Semi-recessed housing option, ideal whenever larger apertures are desired• The ability to retrofit over older downlight installations• Kenall's exclusive Peace of Mind Guarantee®

MedMaster Envela® Downlights (ME11 Series)The MedMaster Envela 1'× 1' complements the direct / indirect style of the MedMaster Envela linear series, offering:

• Thematic design consistency when other linear products are specified• IP64 and NSF2 listed for maximum protection against contamination and

ease of cleanability• Patented, fully sealed and gasketed for infection control • Tool-less design for ease of installation and maintenance

Millenium Edge Series 100 Watt (LED)*

* Various lamp options available. Consult product specification sheet for details.

MedMaster Envela Series 26 Watt (LED)*

4" Round Regressed Lens

20 Watt LED 50 Watt MR16

LED

4" Square Regressed Lens

20 Watt LED 50 Watt MR16

LED


Various lamp options available See pages 18-20

LED



Kenall's Sealed Downlight familyKenall's new 4" round and square downlights complete this architectural family and serve as a welcome addition to the popular 6" and 8" apertures. Kenall's downlight series offers the associated benefits of longer lamp life, reduced maintenance and an environmentally friendly, sustainable energy source. The enhanced LED offering further punctuates the series' cost and energy savings.

Sealed Regressed Lens – Nominal 4", 6" and 8" Apertures

Sealed Flush Lens – Nominal 6" and 8" Apertures

8" Round Flush Lens


6" Round Flush Lens


LED

LED

LED

5



4" Sealed regressed round and Square Kenall is pleased to announce the expansion of our downlight family with the addition of our new 4" round and square sealed regressed downlight luminaires. The 4" additions complete the family and provide a new aesthetic with a square aperture offering. Their tighter beam spread in an LED or MR16 lamp is ideal to highlight task areas, as a chart light, or over a nurses' station.

New! 4" Round Sealed Regressed Lens

New! 4" Square Sealed Regressed Lens

LED Housing Shown

20 Watt LED (1058 delivered lumens @ 4000K)

50 Watt MR16

LED

LED Housing Shown

20 Watt LED (1058 delivered lumens @ 4000K)

50 Watt MR16

LED

new!

6



Sealed Regressed Lens Downlight Series

• 4"(Round & Square) , 6"and 8"(Round) apertures with aesthetic regressed lens and a variety of trim options

• Available in a variety of lamp types and wattages, including dimmable LED

• Marine-grade, diecast aluminum heatsink (LED)• SureShield™ mesh filter reduces radiated emissions and enables

MIL STD 461F for MRI and surgical suites• Compact fluorescent housing is 18-gauge die-formed steel • Trim is marine grade, diecast aluminium

Sealed regressed Lens Downlight Series The regressed lens downlight series delivers a traditional architectural style and photometric distribution appropriate for general area lighting, such as administrative areas and corridors, yet is sealed for specialty applications like patient rooms, nursing stations and surgical suites. It delivers soothing, low glare light and is available in a variety of lamp sources, including dimmable LED.

LED housing shown

Surgical Suites MRI Rooms General Area

LED 461FMilitary Standard

Air Force/Navy Fixed

IP64

Recommended Applications

CCEAApproved

IC Rated

High Abuse

C

Consult specification sheets at www.kenall.com for listing details.

7



Sealed regressed Lens Downlight Series Kenall's regressed downlights have been specifically designed for use in the most environmentally demanding applications. Due to their rich feature set, our sealed regressed downlights are backed by certifications from independent testing labs to ensure product performance and durability.

Compact Fluorescent Housing4" LED Square Housing

LED Housing Shown

4

2

3

6

1 Fully gasketed, sealed regressed lens and optical chamber. Spun aluminum reflector with specular, low iridescent anodized finish.

6 Tool-less access with hidden spring clips for easy relamping and maintenance.

3 Intelligent thermal design boasts integrated heat sink to extend LED life.

5 Adjustable mounting frame for precise luminaire positioning, strength and durability.

2 Marine-grade, die cast aluminum trim ring available in a variety of finishes.

4 LED Driver offers flexible dimming capabilities ranging from 5%-100%.

1

5

8



Sealed regressed Lens Downlight Series

Housing Styles

LED Horizontal Compact Fluorescent IC Rated

6" Round with Clear Semi-Specular

Reflector

8" Round with Antimicrobial

Low-Gloss White Reflector

Trim Rings and ReflectorsAll Kenall sealed regressed downlights are offered with a standard clear specular low-iridescent reflector and with optional clear semi-specular or low gloss white antimicrobial finishes. Trim rings constructed of cold rolled steel, aluminum or stainless steel materials. Consult individual specification sheets for additional trim ring and reflector options and finishes.

4" Round with Clear Semi-Specular

Reflector

4" Square with Clear Semi-Specular

Reflector

Catalog Number Example For Regressed Downlight Luminaires The following chart demonstrates catalog number logic for a surgical suite regressed downlight. Please refer to the lamp charts on pages 18-20 for a comprehensive listing of sealed regressed lens downlight offerings.

Example: M2RDL4L-20L30K-120-SCC-ALG-T-FS

Model M2RDL4L 4" Round M2RSDL4L 4" Square

Lamp Type 20L30K 20 Watt LED 3000K, 80CRI 20L30KH 20 Watt LED 3000K, 90CRI 20L35K 20 Watt LED 3500K, 80CRI 20L40K 20 Watt LED 4000K, 80CRI

Trim/Reflector FinishLamp Type Voltage

Driver Type

Lens Type

Voltage120 120 Volts277 277 Volts347 347 Volts

Driver Type SCC Standard Constant Current DCC 0-10V Dimming Constant Current

Trim/Reflector FinishALG Flat White Antimicrobial GW Gloss WhiteCSS Clear Semi-Specular

Lens TypeT .125" Clear AcrylicG .125” Clear Polycarbonate8 .188 Tempered Glass

Options

OptionsFS Fuse & HolderCCEA CCEA/Chicago PlenumIP64 Wet Locations - Covered Ceiling and IP64 rating

Model

M2RDL4L

9



Delivered Lumens

photometrics

Sealed Regressed Lens DownlightSealed regressed lens downlights are most frequently used when designers prefer low glare luminaires to keep the ceiling visually quiet. With typical spacing criteria between 1.0 and 1.2, these regressed lens downlights provide significant room illumination without overwhelming the occupant's visual space.

Distance In Units Of Mounting Height 1/2 Maximum Candela Trace Shown As Red Line

Polar Distribution Plot 4"Diameter LED Regressed Lens MRDL4L-20L40K [20 Watt, 4,000K]

697

349

1046

2

1

1394

Iso-footcandle Plot Measured at 10' mounting height

2 1 0

1

0

1 .1

.2.5

5

10

12

LED Light Output Ratings Kenall's regressed lens downlights are available in a variety of LED engines, color temperatures and configurations. The performance matrix below summarizes the output for each of these configurations in “delivered lumens”, which is the preferred reporting method of the Department of Energy’s Lighting Facts program. Delivered lumens measures the true light output leaving the luminaire after considering all of the thermal, optical and electrical losses that are present in every luminaire. For comparative purposes, always demand ratings in delivered lumens.

Maximum Candela = 1394.337 Located At Horizontal Angle = 0, Vertical Angle = 0 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.) 2 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.)

Application Product FamilyNominal Aperture

Dimension Shape LED

Engine Drive

Current Input Watts

Min CRI 3000K 3500K 4000K 3000K

@ 90 CRI

Estimated L70 LED Life

(Hours)

General Purpose

MRDL4L 4" Round 20L 700 mA 22W 80 987 1058 1058 800 100,000

MRSDL4L 4" Square 20L 700 mA 22W 80 987 1058 1058 800 100,000

MRDL6L 6" Round 26L 350 mA 30W 80 1559 — 1660 — 120,000

MRDL6ICL (IC Rated) 6" Round 26L 350 mA 30W 80 1559 — 1660 — 120,000

Surgical

M2RDL4L 4" Round 20L 700 mA 22W 80 987 1058 1058 800 100,000

M2RSDL4L 4" Square 20L 700 mA 22W 80 987 1058 1058 800 100,000

M2RDL6L 6" Round 26L 350 mA 30W 80 1559 — 1660 — 120,000

MRI

MRIRDL4L 4" Round 14L 350 mA 18W 80 916 965 965 800 130,000

MRIRSDL4L 4" Square 14L 350 mA 18W 80 916 965 965 800 130,000

MRIRDL6 6" Round 24L 350 mA 30W 80 1290 — 1380 — 120,000

High Abuse HRDL6ICL (IC Rated) 6" Round 26L 350 mA 30W 80 1559 — 1660 — 120,000

Distance In Units Of Mounting Height 1/2 Maximum Candela Trace Shown As Red Line

Polar Distribution Plot 6"Diameter LED Regressed Lens MRDL6L-26L40K [26 Watt, 4,000K]

1620

810

405

1215

2

1


2 1 0

1

0

1

.1

.2.5

510

12

Maximum Candela = 1620.289 Located At Horizontal Angle = 0, Vertical Angle = 15 1 - Vertical Plane Through Horizontal Angles (45 - 225) 2 - Horizontal Cone Through Vertical Angle (15)

10



Sample application: patient roomIn this example, both regressed and flush lens sealed downlights are used for different reasons. The regressed lens is utilized within the general patient room area due to its low brightness and ability to provide a visually 'quiet' ceiling. Additionally, sealed downlights are needed for infection control, to prevent the flow of airborne contaminants into the room. In general areas such as this, where intermediate spacing criteria is required, regressed lens downlights can be used to achieve the residential look and feel so desirable in today’s patient room.

11



Sample application: restroomThe flush lens downlight, on the other hand, is ideal for restroom applications due to its ability to effectively light vertical surfaces. Sealed downlights also provide ingress protection against water and humidity, particularly important in restroom and shower applications.

Flush Lens Downlight (Above)The flush lens downlight is typically used for specialty applications, providing:• High vertical illuminance• Wide angle distribution • Sealed and IP65 listed to prevent the ingress of water and humidity• Protection of reflector—minimizing dust and dirt buildup

Regressed Lens Downlights (Left) The regressed lens downlight is typically used for general area ambient illumination, providing:• Low glare• Conical distribution• Traditional design aesthetic• Tool-less access for ease of installation and maintenance

12



Consult specification sheets at www.kenall.com for listing details.

Sealed Flush Lens Downlight Series

• 6"and 8" Round apertures with flush lens for cleanability

• Available in a variety of lamp types and wattages, including dimmable LED

• Fully sealed and enclosed aluminum housing

• Choice of diecast aluminium, cold rolled steel or stainless steel trim; or standard antimicrobial trim finish for healthcare applications

• Wall Wash option available

Sealed flush Lens Downlight SeriesKenall's flush lens downlights are rugged, with design features like one-piece housings, diecast trim rings with Torx® fasteners and heavy-duty polycarbonate or glass lens options, enabling them to be installed in unsupervised high abuse or transportation settings. Additionally, they are sealed and designed to prevent contaminants from entering the fixtures, can be easily cleaned and can withstand rigorous cleaning protocols, making them equally suitable for cleanroom or healthcare applications.

TransportationCleanroom or Containment Areas

IP65 FN ISO 5Class 100K230LED

CCCEAApproved

IC Rated 461F

Military Standard


Surgical Suites MRI Rooms General Area

High Abuse

Recommended Applications

13



Sealed flush Lens Downlight SeriesKenall's sealed flush lens downlight features a completely sealed, enclosed housing and a fully gasketed, overlapping trim ring. With features that include non-ferrous construction, seam-welded aluminum housings, sealed lenses, and a variety of antimicrobial finishes, these fixtures have been designed to provide the highest level of protection from contaminants while withstanding the most rigorous cleaning protocols.

4

4

2

2

5

5

3

3

1

1

6

6

Fully sealed and enclosed housing featuring seam welded corners.

One-piece, 60° beveled edge trim ring constructed of cold rolled steel, stainless steel or diecast aluminum withstands harsh cleaning protocols and enables ease of cleanability.

Smooth exterior flush lens in acrylic, polycarbonate or tempered glass for an easy-to-clean surface that offers an environmental seal.

Adjustable mounting brackets provide precise luminaire positioning and flexibility for ease of installation.

Captive stainless steel flat head fasteners, or tamper-resistant Torx® fasteners secure trim ring to housing.

Flush lens and aluminum reflector with low iridescent anodized finish provides consistent photometric performance.

LED Housing Shown

14



Sealed flush Lens Downlight Series

Housing Styles

Vertical Lamp Orientation LED Horizontal Lamp Orientation

Trim Rings and ReflectorsAll Kenall sealed flush lens downlights are offered with a standard clear specular low-iridescent reflector and with optional clear semi-specular or champagne gold low-iridescent finishes. Trim rings constructed of cold rolled steel, aluminum or stainless steel materials. Consult individual specification sheets for additional trim ring and reflector options and finishes.

6" Round with Black, White or Brushed Stainless Steel Trim Ring

8" Round with Black, White or Brushed Stainless Steel Trim Ring

Catalog Number Example For Sealed Flush Lens Downlight Luminaires The following chart demonstrates catalog number logic for a surgical suite flush lens downlight. Please refer to the lamp charts on pages 18-20 for a comprehensive listing of sealed flush lens downlight offerings, options and accessories.

Example: M2DL6VL2-30L30K-120-2FW-T-FS

Lamp Type 30L30K 30 Watt 3000K LED30L40K 30 Watt 4000K LED

TrimDCFW Die-Cast Aluminum Flat White (Antimicrobial Finish)DCFB Die-Cast Aluminum Flat Black (Antimicrobial Finish)2FW 18-Ga CRS Flat White (STD) (Antimicrobial finish)2FB 18-Ga CRS Flat Black (Antimicrobial finish)PAFW .050" Aluminum Flat White (Antimicrobial finish)PAFB .050" Aluminum Flat Black (Antimicrobial finish)5BR 18-Ga Type 304 SS Brushed5FW 18-Ga Type 304 SS Flat White (Antimicrobial finish)5FB 18-Ga Type 304 SS Flat Black (Antimicrobial finish)2FCC 18-Ga CRS Custom Color (Consult Factory)5FCC 18-Ga Type 304 SS Custom Color (Consult Factory)PACC Painted Aluminum Custom Color (Consult Factory)

Lens TypeLamp Type Voltage OptionTrimModel

M2DL6VL2

Lens TypeT .125" Clear High Impact AcrylicG .125" Clear Polycarbonate

OptionFS Fuse & Holder

Voltage120 120 Volts277 277 Volts

15



Delivered Lumens

photometrics

Sealed Flush Lens Downlight Sealed flush lens downlights are available with either vertical or horizontal lamping. Horizontal lamping typically provides a wider distribution of light than their regressed counterparts. Vertical lamping produces either narrow or wide distributions in a symmetrical pattern, making it appropriate for a wide range of applications.

Distance In Units Of Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve

Distance In Units Of Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve

Maximum Candela = 650 Located At Horizontal Angle = 0, Vertical Angle = 0 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.) 2 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.)

Maximum Candela = 1768 Located At Horizontal Angle = 180, Vertical Angle = 12.5 1 - Vertical Plane Through Horizontal Angles (90 - 270) 2 - Horizontal Cone Through Vertical Angle (0)

Polar Distribution Plot 6" Diameter LED Flush Lens CDL6VL2 [30 Watt, 4,000K]

325

163

488

2

1

650

Polar Distribution Plot 6" Diameter Compact Fluorescent

Horizontal Flush Lens CDL8HF2-42P2 [(2) 42 Watt CFL]

884

442

1326

2

1

1768


2 3 4 1 0 3

2

1

0

1

2

3

2.75

1.75

2.25 3.75

.1

.2

.51

25


2 3 4 1 0 3

2

1

0

1

2

3

2.75

1.75

2.25 3.75

.1

.2

.51

2510

LED Light Output Ratings Kenall's 6" round, sealed flushed lens downlights are available in a variety of LED engines, color temperatures and configurations. The performance matrix below summarizes the output for each of these configurations in “delivered lumens”, which is the preferred reporting method of the Department of Energy’s Lighting Facts program. Delivered lumens measures the true light output leaving the luminaire after considering all of the thermal, optical and electrical losses that are present in every luminaire. For comparative purposes, always demand ratings in delivered lumens.

ApplicationsProduct

Family

Nominal Aperture

Dimension Shape LED

Engine Drive

Current Input Watts

Min CRI 3000K 3500K 4000K 3000K

@ 90 CRI

Estimated L70 LED Life

(Hours)

General Purpose MDL6VL2 6" Round 30L 700 mA 30W 80 1200 — 1285 — 60,000

Surgical M2DL6VL2 6" Round 30L 700 mA 30W 80 1200 — 1285 — 60,000

MRI MRIDL6VL2 6" Round 30L 700 mA 30W 80 1200 — 1285 — 60,000

Transportation TDL6VL2 6" Round 30L 700 mA 30W 80 1200 — 1285 — 60,000

Cleanroom CDL6VL2 6" Round 30L 700 mA 30W 80 1200 — 1285 — 60,000

High Abuse HADL6VL2 6" Round 30L 700 mA 30W 80 1200 — 1285 — 60,000

16



complementary products MedMaster envela® SeriesThe sealed MedMaster Envela® Series (ME11) provides smooth, ambient illumination from its high performance LED or compact fluorescent source. This unique design eliminates the glare and reflections that are commonly found in traditional lensed units, making it particularly ideal for general illumination. Additionally, its tool-less design enables easy maintenance, yet the luminaire is IP64 listed for maximum protection against contaminants, and is sealed for cleanability.

MedMaster Envela ME11 Series • 1'×1' Dimension• Available in dimmable 24-watt LED (3000K or 4000K) or compact fluorescent• Lens options: Frosted DR extruded acrylic or clear DR extruded acrylic with internal perforation• One-piece seam-welded housing• NSF2 Listed• UL certified IP64 per IEC60598

Fully gasketed, sealed optical chamber with impact resistant DR Acrylic lens

One-piece, seam-welded housing construction for strength and durability

Tool-less access makes relamping and maintenance quick and easy

LEDIP64

17



complementary products Millenium edge™ SeriesKenall’s Millenium Edge™ Series (MR13FF) is a flat lens version of the popular Millenium™ Round Series, offering a Dark Sky compliant option for soffit, low ceiling or corridor applications. The luminaire complements Kenall's other Millenium series fixtures to provide thematic design consistency and quality throughout a facility. Millenium Edge will look great for years to come whether installed indoors or out. Also ideal for retrofit installations, Millenium Edge can be used to cover up existing downlight openings, replacing a dated look with a transformed design aesthetic.

Low Profile Surface Semi-Recessed Deep Profile

Millenium Edge Series• Available in two dimensions: 13" or 17" diameter• LED: 20, 40, 50, 100 watt• Up to 26W CFL, 70W HID• Low, deep, or semi-recessed housing styles• One-piece injection molded pearlescent polycarbonate lens• IESNA-designated full cutoff• UL certified IP64 per IEC60598

LEDIP64

Edge’s flat lens is ideal for soffit mounted applications and interior low ceilings. The low profile saves space and clears obstructions. Edge’s stylized lip makes it a particularly ideal choice for downlight retrofits.

Housing Styles

18



product Selection table by Market Segment

Healthcare Downlights

ModelNominal Aperture Shape Height Lamps Orientation Lamp Qty Lamping

Patient Room/General Area– Regressed LensMRDL4L/MRSDL4L 4" Round/Square 5.5" LED — — 20W

MRDL6L 6" Round 6.5" LED — — 26W

MRDL6ICL (IC Rated) 6" Round 7.25" LED — — 26W

MRDL4/ MRSDL4 4" Round/Square 4.75" MR16 Vertical 1 50W

MRDL6 6" Round 7.25" CFL Horizontal 1 18Q, 26Q, 18P, 32P

MRDL6IC (IC Rated) 6" Round 8.25" CFL Horizontal 1 18Q, 26Q, 18P, 26P

MRDL8 8" Round 7.25" CFL Horizontal 1-2 18Q, 26Q, 18P, 26P, 32P, (1) 42P

MRDL8IC (IC Rated) 8" Round 8.25" CFL Horizontal 1-2 18Q, 26Q, 18P, 26P, (1) 32P

Patient Room/General Area – Flush LensMDL6VL2 6" Round 7.25" LED — — 30W

MDL6VF 6" Round 10.75" CFL Vertical 1 18Q, 26Q, 18P, 26P, 32P

MDL8VF 8" Round 12.75" CFL Vertical 1 18Q, 26Q, 18P, 26P, 32P, 42P

MDL8HF 8" Round 8.25" CFL Horizontal 1 18Q, 26Q, 18P, 26P, 32P, 42P

MDL6HF 6" Round 6.25" CFL Horizontal 1-2 13Q, 18Q, 26Q, (1) 18P, (1) 26P, (1) 32P, (1) 42P

MDL6VI 6" Round 10.75" Inc Vertical 1 75W, 100W, 150W

MDL6HI 6" Round 5.25" Inc Horizontal 1 100W, 150W

MDL8VI 8" Round 12.75" Inc Vertical 1 75W, 100W, 200W, 250W

MDL8HI 8" Round 7.25" Inc Horizontal 1 100W, 200W

Surgical Suite – Regressed LensM2RDL4L/ M2RSDL4L 4" Round/Square 6.0" LED — — 20W

M2RDL6L 6" Round 6.50" LED — — 26W

M2RDL6 6" Round 7.25" CFL Horizontal 1 18Q, 26Q, 18P, 26P, 32P

M2RDL8 8" Round 7.25" CFL Horizontal 1-2 18Q, 26Q, 18P, 26P, 32P, (1) 42P

Surgical Suite – Flush LensM2DL6VL2 6" Round 7.25" LED — — 30W

M2DL6VF 6" Round 10.75" CFL Vertical 1 13Q, 18Q, 26Q, 18P, 26P, 32P, 42P

M2DL6HF 6" Round 6.25" CFL Horizontal 1-2 13Q, 18Q, 26Q, (1) 18P, (1) 26P, (1) 32P, (1) 42P

M2DL8VF 8" Round 12.75" CFL Vertical 1 18Q, 26Q, 18P, 26P, 32P, 42P

M2DL8HF 8" Round 8.25" CFL Horizontal 1-2 18Q, 26Q, 18P, 26P, (1) 32P, (1) 42P

M2DL6VI 6" Round 10.75" Inc Vertical 1 75W, 100W, 150W

M2DL6HI 6" Round 5.25" Inc Horizontal 1 100W, 150W

M2DL8VI 8" Round 12.75" Inc Vertical 1 75W, 100W, 200W, 250W

M2DL8HI 8" Round 7.25" Inc Horizontal 1 100W, 200W

MRI/Imaging Suites – Regressed LensMRIRDL4L/ MRIRSDL4L 4" Round/Square 5.25" LED — — 14W

MRIRDL6 6" Round 6.50" LED — — 24W

MRI/Imaging Suites – Flush LensMRIDL6HI 6" Round 5.25" Inc Horizontal 1 75W, 100W, 150W

MRIDL8VI 8" Round 12.75" Inc Vertical 1 75W, 100W, 200W, 250W

MRIDL8HI 8" Round 7.25" Inc Horizontal 1 75W, 100W, 200W

19




Sealed Enclosure Downlights


Cleanroom – Flush LensCDL6VL2 6" Round 7.25" LED — — 30W

CDL6VF 6" Round 10.75" CFL Vertical 1 13Q, 18Q, 26Q, 18P, 26P, 32P, 42P

CDL6HF 6" Round 6.25" CFL Horizontal 1-2 13Q, 18Q, 26Q, (1) 18P, (1) 26P, (1) 32P, (1) 42P

CDL6VM 6" Round 10.75" MH Vertical 1 39W T6, 50W, 70W, 70W T6

CDL6HM 6" Round 5.25" MH Horizontal 1 50W, 70W

CDL6VI 6" Round 10.75" Inc Vertical 1 75W, 100W, 150W

CDL6HI 6" Round 5.25" Inc Horizontal 1 100W, 150W

CDL8VF 8" Round 12.75" CFL Vertical 1 18Q, 26Q, 18P, 26P, 32P, 42P

CDL8HF 8" Round 8.25" CFL Horizontal 1-2 18Q, 26Q, 18P, 26P, (1) 32P, (1) 42P

CDL8VM 8" Round 12.75" MH Vertical 1 50W, 70W, 100W

CDL8HM 8" Round 7.25" MH Horizontal 1 50W, 100W

CDL8VI 8" Round 12.75" Inc Vertical 1 75W, 100W, 200W 250W

CDL8HI 8" Round 7.25" Inc Horizontal 1 100W, 200W

20




High Abuse Downlights


Regressed LensHRDL6ICL (IC Rated) 6" Round 8.25" LED — — 26W

HRDL6 6" Round 8.50" CFL Horizontal 1 18Q, 26Q, 18P, 26P, 32P

HRDL6IC (IC Rated) 6" Round 8.75" CFL Horizontal 1 18Q, 26Q, 18P, 26P

HRDL8 8" Round 8.50" CFL Horizontal 1-2 18Q, 26Q, 18P, 26P, 32P, (1) 42P

HRDL8IC (IC Rated) 8" Round 8.75" CFL Horizontal 1-2 18Q, 26Q, (1) 32P

Flush LensHADL6VL2 6" Round 7.25" LED — — 30W

HADL6VF 6" Round 10.75" CFL Vertical 1 13Q, 18Q, 26Q, 18P, 26P, 32P

HADL6HF 6" Round 6.25" CFL Horizontal 1-2 13Q, 18Q, 26Q, (1)18P, (1)26P, (1) 32P, (1) 42P

HADL6VM 6" Round 10.75" MH Vertical 1 39W T6, 50W, 70W, 70W T6

HADL6HM 6" Round 5.25" MH Horizontal 1 50W, 70W

HADL6VI 6" Round 10.75" Inc Vertical 1 75W, 100W, 150W

HADL6HI 6" Round 5.25" Inc Horizontal 1 100W, 150W

HADL8VF 8" Round 12.75" CFL Vertical — 18Q, 26Q, 18P, 26P, 32P, 42P

HADL8HF 8" Round 8.25" CFL Horizontal 1-2 18Q, 26Q, 18P, 26P, (1) 32P, (1) 42P

HADL8VM 8" Round 12.75" MH Vertical 1 50W, 70W, 100W

HADL8HM 8" Round 7.25" MH Horizontal 1 50W, 100

HADL8VI 8" Round 12.75" Inc Vertical 1 75W, 100W, 200W, 250W

HADL8HI 8" Round 7.25" Inc Horizontal 1 100W, 200W

Transportation Downlights


Platforms/Terminals/Tunnels – Flush LensTDL6VL2 6" Round 7.25" LED — — 30W

TDL6VF 6" Round 10.75" CFL Vertical 1 13Q, 18Q, 26Q, 18P, 26P, 32P

TDL6HF 6" Round 6.25" CFL Horizontal 1-2 13Q, 18Q, 26Q, (1) 18P, (1) 26P, (1) 32P

TDL6VM 6" Round 10.75" MH Vertical 1 50W, 70W, 70W T6

TDL6HM 6" Round 6.25" MH Horizontal 1 50W, 70W

TDL6VI 6" Round 10.75" Inc Vertical 1 75W, 100W, 150W

TDL6HI 6" Round 5.25" Inc Horizontal 1 100W, 150W

TDL8VF 8" Round 12.75" CFL Vertical 1 18Q, 26Q, 18P, 26P, 32P, 42P

TDL8HF 8" Round 8.25" CFL Horizontal 1-2 18Q, 26Q, 18P, 26P, (1) 32P, (1) 42P

TDL8VM 8" Round 12.75" MH Vertical 1 50W, 70W, 70W T6, 100W

TDL8HM 8" Round 8.25" MH Horizontal 1 50W, 70W, 100W

TDL8VI 8" Round 12.75" Inc Vertical 1 75W, 100W, 200W, 250W

TDL8HI 8" Round 7.25" Inc Horizontal 1 100W, 200W

21



Listings and certificationsMulti-use downlights must satisfy a large number of demanding lighting and environmental requirements. Applicable downlight listings are shown below. Please refer to specific listings within each section of this guide to determine appropriate product listings.

UL/CUL Listed—The UL symbol signifies that Underwriter’s Laboratory (UL) has determined that a manufacturer has demonstrated the ability to produce a product complying with UL's requirements with respect to specific risk, performance under specific conditions, compliance with regulatory codes and specified standards, or any other conditions as determined by UL.

ETL— A product bearing the ETL Listed Mark is determined to have met the minimum requirements of prescribed product safety standards as certified by a Nationally Recognized Testing Laboratory (NTL). The mark also indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to periodic follow-up inspections to verify continued conformance.

IP64— UL Certified IP64 per IEC 60598 ensures that the enclosure is dust-tight and protected against splashing water without any harmful effects.

IP65 — UL Certified IP65 per IEC 60598 ensures that the enclosure is dust-tight and protected against jet streams of water from any direction without any harmful effects.

NSF2— An NSF2 Listing denotes that the luminaire has been evaluated for corrosion resistance, cleanability and the ability of exposed material to withstand normal wear. This supports the infection control standards established by healthcare facilities as it indicates that the luminaire is easy to sanitize.

MIL STD 461F— Military Standards testing measurements cover both radiated and conducted electromagnetic emissions in addition to maximum allowable amounts of emitted energy based on both frequency range and field strength. Luminaires meeting MIL STD 461F pose the lowest possible likelihood of causing EMI-related issues.

CCEA Approved—The City of Chicago Environmental Air (CCEA) rating ensures that the luminaire is inherently airtight. Wiring and/or branch circuit terminations are sealed off and gasketed from the plenum air space. This listing ensures that the luminaire is sealed to limit air flow from the room side to the plenum.

IC RATED — An IC rated fixture must, by definition, “be approved for zero clearance insulation cover by a nationally recognized OSHA testing laboratory”, such as Underwriters Laboratory (UL). ”IC” is short for Insulation Contact, which means that any housing that bears this rating can make direct contact with ceiling insulation.

Food Zones — Construction suitable for Food Zone/Non-Food Contact. All exposed sheet metal will be painted CRS, painted aluminum or anodized aluminum. Paint must meet U.S. Code of Federal Regulations, Title 21 to be used in this application. Fasteners will be stainless steel and removable without the use of a tool and the outer exposed lens must be an FDA approved Food Grade polycarbonate material.

ADA Compliant —Although ADA is not specific to lighting, it does impact fixture design by creating standards for wall sconce projection space and hanging light clearance. Section 4.4 of the ADA states that ”objects projecting from walls with their leading edges between 27" and 80" above the finished floor shall protrude no more than 4" into walks, halls, corridors, passageways or aisles.”

ISO 5— Suitable for ISO 5, Class 100 Rated Rooms (FED-STD 209E). Measures the number of particles equal to or greater than 0.5 mm in one cubic foot of air. The measurement must not exceed specified particle limits in order for the space to be considered a controlled ‘clean room’ environment.

K230—The K230 performance standard determines a fixture’s ability to restrict the passage or penetration of contaminants when subjected to a prescribed pressure level in either positively or negatively pressurized environments.

IDA Approved (International Dark-Sky Association) — Educational,environmental 501(c)(3) nonprofit dedicated to protecting and preserving the nighttime environment and our heritage of dark skies through quality outdoor lighting.

RoHS Compliant — The RoHS directive aims to restrict certain dangerous substances commonly used in electronic and electronic equipment, including Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE).

CLTC Affiliate Partnership—The California Lighting Technology Center (CLTC) is dedicated to developing, designing and promoting high-performance, energy-efficient lighting and daylighting technologies. Affiliate partners provide a vital source of funding for the Center's many important activities, and supports CLTC's collaborative approach to producing innovative, energy-saving products and practices.

Kenall’s High Abuse luminaires are designed and built to take exceptional physical punishment. When installed according to our instructions, Kenall will repair or replace any unit rendered inoperable due to physical abuse for the life of the product installation.

ISO 5Class 100

IC Rated

ADA

IP65

IP64

CCEAApproved

K230

C

461FMilitary Standard


FN

22



ISO 17025 (ILAC) Approved Lab

Kenall's photometric laboratory is ISO/ IEC 17025 accredited, providing the credentials to obtain timely Department of Energy Lighting Facts® listings, Design Lights Consortium approvals, and EPA recognition for ENERGY STAR. Inclusion in the list of approved testing labs greatly enhances Kenall's ability to provide more comprehensive energy efficiency testing with the benefit of shortened lead times. Kenall Sophistication in Testing Whether testing a luminaire’s photometry or its ability to protect against the ingress of dust or water, Kenall is equipped with a state-of-the-art certified safety laboratory, providing the following testing capabilities:

• Certified for safety testing by Underwriters Laboratory and Intertek Testing Laboratories for Incandescent, Fluorescent and HID Luminaires (UL 1598), LED Luminaires (UL 8750) Hazardous Locations (UL 844, Class I Div II, and Emergency Lighting (UL 924)• Ingress Protection testing (Dust and Water chambers)• Highly Accelerated Stress Screening (-50°C to 150°C Environmental Chamber)• 25°C and 40°C thermal testing rooms• LM-79 photometric laboratory including a Type C goniophotometer as well as a 2-meter integrating sphere with spectroradiometer

Committed to LED Technology LED sources present an ideal solution for a variety of lighting applications. Low energy consumption and high efficacy, in concert with an extended lamp life and low heat output, create an ideal source. The substantial lamp life of an LED also reduces its maintenance requirements, which limits the potential risk of damage during routine maintenance. In addition, LED sources emit very little EMI or RFI emissions, contain no toxic mercury and emit no harmful UV or infrared radiation, creating a truly green source. Its modular design facilitates product upgrades, reducing the material that ends up in landfills, further increasing its sustainability.

LED Product WarrantyIn addition to the standard product warranty, Kenall warrants LED lamps and internal power regulation components for a period of five years from the date of the invoice against defects in materials and workmanship that result in a fixture lumen depreciation of 30% or greater. Lumen depreciation is compared to the published lumen output of the product on the date of manufacture per IESNA LM-79-08 reporting procedures. Normal accumulation of particulates on the optical surfaces shall not be factored into the lumen depreciation.

Scansafe Guarantee®

Kenall will repair or replace any MRI LED product, for a period of one year, when installed according to our instructions, that fails to perform to applicable MRI room interference and susceptibility standards.

In addition, Kenall will repair or replace only LED products that fail to provide 70% of rated light output for five years from its date of installation.

Kenall Quality assurance

23



additional Kenall product Literature

Visit the Kenall website to view our comprehensive selection of lighting products Look to www.kenall.com for product details, specification sheets, photometric data and Revit® files for our innovative luminaires. Whether your project calls for illuminating healthcare facilities, transportation platforms, institutional buildings or any number of commercial lighting projects, Kenall has the design expertise, performance standards and product quality to meet the needs of any application.

LED Lighting for Mri iMaging suitEs

SimpleSeal™ Cleanroom and ContainmentMRI Imaging Suites

EnviroPro™ Food Processing Millenium™ High Abuse

MedMaster™ Healthcare

Luxtran™ Transportation

1020 Lakeside Drive Gurnee, illinois 60031 847-360-8200 faX 847-360-1781 www.kenall.com

©2012 Kenall Mfg. ̄̄co. all rights reserved. L10045-103112

Date post:	09-Feb-2022
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

Specification GraDe SeaLeD DownLiGhtS - Kenall Manufacturing

Documents