SPYP INT ECLYPSE BF-8 M8 HD-7C6 2N1 v1.5. SPYP INT THANK YOU FOR CHOOSING A SPYPOINTPRODUCT. This...

SURVEILLANCE CAMERA | ADVENTURE SERIES

P INTSPY INTPSPY

Adventureseries · série

expedition series · série

summit pro series · série

smart series · série

TINY series · série

LIVE series · série

USER MANUAL

Models :BF-6 ECLYPSEBF-8 M8HD-7 C62N1

v1.5

P INTSPY INTPSPY

THANK YOU FOR CHOOSING A SPYPOINT PRODUCT.

This manual will guide you through all the features of your device so that you will get optimal use out of your SPYPOINT product.

Our priority is to provide outstanding customer service. If you need support for your product, please contact the SPYPOINT technical service or visit our website.

CONTACT

1-888-779-7646

[email protected]

www.spypoint.com

ABOUT US

GG Telecom’s mission is to offer products that are easy to use, innovative, affordable and of exceptional quality. Our SPYPOINT products are mainly used for hunting and

residential/commercial surveillance. They are distributed and shipped all over the world and the market never stops growing. Prosperous and respected, GG Telecom is a company that constantly keeps abreast of new technologies and listens to its customers to deliver cutting-edge products with practical solutions that improve hunting and outdoor activities.

JOIN THE SPYPOINT COMMUNITY

facebook.com/spypoint youtube.com/spypointtrailcam twitter.com/SpypointCamera vimeo.com/spypointxcelcam



CAMERAS WITH CELLULAR TRANSMISSION• If you need information or would like to subscribe to mySPYPOINT service, go to www.myspypoint.com.• For the latest version of the activation procedure, go to support.spypoint.com/activation.

http://www.spypoint.com

http://facebook.com/spypoint

http://twitter.com/spypointcamera

http://youtube.com/spypointtrailcam

http://www.myspypoint.com

http://support.spypoint.com/activation/

3

Package contents ......................................................................... 4

Components ................................................................................. 5

Power ........................................................................................... 7

Memory card ............................................................................... 9

Flash unit (2N1) ............................................................................ 9

"BUSY" DEL .................................................................................. 9

Settings .......................................................................................10

Distance ......................................................................................12

Sound recording (BF-8, HD-7, ECLYPSE, M8) ...................................13

File transfer to a computer ..........................................................14

Troubleshooting ..........................................................................15

Error messages............................................................................15

Available accessories ...................................................................16

SpecificationsBF-6 .............................................................................................18BF-8 .............................................................................................19HD-7 ............................................................................................202N1 ..............................................................................................21ECLYPSE ........................................................................................22M8 ...............................................................................................23C6 ................................................................................................24

Regulation2N1 ..............................................................................................25BF-6, BF-8, HD-7, ECLYPSE, M8 ........................................................26

Table of contents

Limited warranty2N1 ..............................................................................................27BF-6, BF-8, HD-7, ECLYPSE, M8, C6 ..................................................28

Repair service2N1 ..............................................................................................27BF-6, BF-8, HD-7, ECLYPSE, M8, C6 ..................................................28

4

Package contents

Audio-video cable (BF-8, HD-7, ECLYPSE,

M8)

Infrared unit(2N1)

Flash unit(2N1)

USBcable

Installation strap

SPYPOINTCamera

Video cable (BF-6, 2N1, C6)

Quick start guide

CompoNENTES

KompoNENTEN

Starten

1

2

3

4

56

7 8

15

12

13

11

14

10

19

18

17

16

9

1praxistip! Trennen Sie einen gewünschten Abschnitt dieser Anleitung ab und platzieren Sie diesen im Kameragehäuse.

CompoSANTS

Quick start guidev1.2

models: BF-6/S-BF-6BF-8/S-BF-8HD-72N1ECLYPSEM8

P INTSPY INTPSPY

Surveillance cameraAdventure series

Adventure series Série aventureAbenteuer-Serieserie de aventuraserie di avventura

Expedition seriesSérie ExpéditionExpedition SerieSeries expediciónSerie spedizione

Pro seriesSérie proPro-SerieSerie proSerie pro

Smart seriesSérie Smart Smart serieSmart serieSmart serie

Live seriesSérie LiveLive-SerieSeries LiveSerie Live

Tiny seriesSérie TinyTiny-SerieSerie TinySerie Tiny

Get started

Settings

Error messages

1

2

3

4 Complete instructions www.spypoint.com

CompoNENTS

Get started

1

2

3

4

56

7 8

15

12

13

11

14

10

19

18

17

16

9

1Useful! Detach a section and insert it into the sleeve provided for this purpose within the housing for the camera.

1 Photo lens Image sensor and infrared filter.

2 Invisible black LEDs or Infrared LEDs (depend-ing on the camera)

Night lighting to obtain black and white photos and videos.

3 Test light (located at the top right for models with 35 LEDs)

Flashes in SET/TEST mode when there is detection and flashes 60 seconds in PHOTO/VIDEO mode to allow the user to leave with-out being photographed or recorded.

4 Fresnel lens Located ahead of the motion sensor, it makes it more sensitive and allows to expand the detection area.

5 12V power jack

This camera can be powered from an external 12-volt DC input such as a 12V battery or a 12V adapter, sold separately.

6 Tripod mount Fixation for a standard ¼-20” tripod mount.

7 Microphone(if applicable)

To record sound, lift the rubber cap and turn it slightly to completely clear the microphone receiver.

8 Solar panel jack(if applicable)

Allows the user to connect a solar panel (SP-12V) to maintain the charge of the lithium battery pack (LIT-09/LIT-C-8), sold separately.

9 35 black LEDs and Flash (if applicable)

Interchangeable units (see FLASH UNIT INSTALLATION section for more details)

10 Battery switch

Allows the user to select the power source according to the type of batteries used.

11 Configuration screen

To see battery level, date, number of recorded files, error messages and settings options.

12 BUSY LED Lights up when the camera is recording.

13 Switch panel Buttons to set the camera.

14 ON/OFF Allows the user to turn on/off the camera.

15 Battery case Insert 6 alkaline or lithium AA batteries or a rechargeable lithium battery pack (LIT-09/ LIT-C-8, sold separately).

16 TV OUT To view photos/videos directly on TV.

17 USB port To transfer or view photos/videos to a computer.

18 SD card slot An SD card is required to record videos/ photos. The camera is compatible with SD/SDHC memory card, up to 32 GB capacity (not included).

19 DISTANCE dial

Allows the user to adjust the distance of detection and the sensitivity of the detector. See DISTANCE section for more details.

bATTErY iNSTALLATioN

We recommend the use of new batteries to ensure a maximum performance of the camera. Rechargeable AA batteries are not

recommended.

6 alkaline AA batteries Lithium battery packLIT-09/LIT-C-8

Switch position (depending on the power source)

Power source Switch position

• 6 AA• 12V• 12V + 6 AA

ALK

• LIT-09*• 12V + LIT-09*• Solar panel + LIT-09*(for cameras compatible with solar panel)

LIT-09 or RECH(depending on the camera)

* Rechargeable lithium battery pack, sold separately (LIT-09) or with a charger (LIT-C-8).

mEmorY CArD iNSTALLATioN

Insert an SD/SDHC memory card (up to 32 GB capacity) in the card slot. The card is inserted correctly when a click is heard.

Before inserting or removing a memory card, always turn off the camera to prevent loss or damage of the pictures already recorded.

FLASh UNiT iNSTALLATioN (if applicable)

Install the Flash unit to obtain color pictures by day and night.

It is not possible to take videos at night with the Flash unit.

Guide de démarrage rapide

v1.2

modèles: BF-6/S-BF-6BF-8/S-BF-8HD-72N1ECLYPSEM8

P INTSPY INTPSPY

Caméra de surveillance Série Adventure







Pour commencer

Programmation

Messages d’erreur

1

2

3

4 Instructions complètes www.spypoint.com

Pour commencer

1

2

3

4

56

7 8

15

12

13

11

14

10

19

18

17

16

9

1pratique! Détacher une section et l'insérer dans la pochette prévue à cet effet à l’intérieur du boîtier de la caméra.

1 Lentille photo Capteur d’image et filtre infrarouge

2 DEL noires invisibles ou DEL infrarouges (selon la caméra)

Éclairage de nuit pour obtenir des photos et vidéos en noir et blanc.

3 Lumière de test (située en haut à droite pour les modèles à 35 LED)

Clignote en mode SET/TEST lors d’une détection et clignote 60 secondes en mode PHOTO/VIDÉO pour permettre à l’utilisateur de quitter les lieux sans être photographié ou filmé.

4 Lentille fresnel Située devant le détecteur de mouvement, elle rend celui-ci plus sensible et permet d’élargir la zone de détection.

5 Prise 12V La caméra peut être alimentée au moyen d’une source externe de 12V telle qu’une batterie 12V ou un adaptateur 12V, vendus séparément.

6 Support pour trépied

Fixation pour trépied standard de ¼-20”.

7 Microphone(si applicable)

Pour enregistrer le son, soulever le capuchon et le tourner légèrement pour que le trou du microphone soit complètement dégagé.

8 Prise pour panneau solaire(si applicable)

Permet de brancher un panneau solaire (SP-12V) qui maintient la charge du bloc pile lithium (LIT-09/LIT-C-8), vendus séparément.

9 35 DEL noires et Flash (si applicable)

Modules interchangeables (voir section INSTALLATION DU mODULE FLASH pour plus de détails)

10 Commutateur Permet de sélectionner la source d’alimentation selon le type de piles utilisées.

11 Écran de configuration

Permet de voir le niveau des piles, la date, le nombre de fichiers enregistrés, les messages d’erreur et les options de programmation.

12 Lumière BUSY S’allume lorsque la caméra enregistre un fichier.

13 Boutons de réglage

Boutons pour programmer la caméra.

14 ON/OFF Permet d’allumer ou d’éteindre la caméra.

15 Compartiment à piles

Insérer 6 piles AA alcalines ou lithium ou un bloc pile lithium rechargeable (LIT-09/LIT-C-8, vendus séparément).

16 Sortie TV OUT Pour visionner les photos/vidéos directement sur un téléviseur.

17 Port USB Pour transférer ou visionner les photos/vidéos à un ordinateur.

18 Fente pour carte SD

Carte SD nécessaire pour enregistrer des vidéos/photos. La caméra accepte les cartes mémoires de type SD/SDHC jusqu’à une capacité de 32Go (non-incluse).

19 Roulette DISTANCE

Permet d’ajuster la distance de détection et la sensibilité du détecteur. Voir section DISTANCE pour plus de détails.

iNSTALLATioN DES piLES

Nous recommandons l’utilisation de piles neuves afin d’assurer un rendement maximal de la caméra. Les piles AA rechargeables

sont déconseillées.

6 piles AA alcalines Bloc pile lithiumLIT-09/LIT-C-8

Position du commutateur (selon la source d’alimentation)

Source d'alimentation Position du commutateur

• 6 AA• 12V• 12V + 6 AA

ALK

• LIT-09*• 12V + LIT-09*• Panneau solaire + LIT-09*(pour caméra compatible avec un panneau solaire)

LIT-09 ou RECH(selon le modèle de caméra)

*Bloc pile lithium rechargeable, vendu séparément (LIT-09) ou avec un chargeur (LIT-C-8).

iNSTALLATioN DE LA CArTE mémoirE

Insérer une carte mémoire de type SD/SDHC (jusqu’à une capacité de 32Go) dans la fente pour carte SD. La carte est correctement insérée lorsqu’un clic se fait entendre.

Avant d’insérer ou de retirer une carte mémoire, toujours mettre la

caméra à OFF pour éviter que les images présentes sur la carte soient supprimées ou endommagées.

iNSTALLATioN DU moDULE FLASh (si applicable)

Installer le module Flash pour obtenir des photos couleur de jour comme de nuit.

Il n’est pas possible de prendre des vidéos de nuit avec le module Flash.

Schnellstartanleitungv1.2

modelle: BF-6/S-BF-6BF-8/S-BF-8HD-72N1ECLYPSEM8

P INTSPY INTPSPY

ÜberwachungskameraAdventure-Serie







Starten

Einstellungen

Fehlermeldungen

1

2

3

4 Vollständige Instruktionenwww.spypoint.comwww.spypoint.info

1 Fotolinse Bildsensor und Infrarot-Filter.

2 Unsichtbare schwarze LEDs oder Infrarot-LEDs (anhängig von der Kamera)

Nachtbeleuchtung für Schwarz/weiß Fotos und Videos.

3 Test-LED (befindet sich oben rechts bei modellen mit 35 LEDs)

Blinkt im SET/TEST Modus, wenn die Kamera eine Bewegung erfasst hat. Im PHOTO/ VIDEO modus blinkt die LED 60 Sekunden, um dem Anwender zu ermöglichen sich zu entfernen, ohne fotografiert zu werden.

4 Fresnel-Linse Erweitert den Erfassungsbereich des Bewe-gungsmelders und erhöht die Empfindlichkeit der Kamera.

5 12V-Anschluss Diese Kamera kann über den externen 12-Vold-DC-Eingang betrieben werden, z.B. mit einer 12V Batterie oder einem 12V Adapter (separat erhältlich).

6 Stativgewinde Befestigung für einen Standart ¼-20”- Gewindeeinsatz.

7 Mikrofon (falls zutreffend)

Für Tonaufnahmen, heben Sie die Gummia-beckung an und drehen diese zur Seite, damit das Mikrofon frei liegt.

8 Solarpanel-Eingang (falls zutreffend)

Ermöglicht ein Solarpanel (SP-12V) anzus-chließen, um die Ladung des Lithium-Akku-Pack (LIT-09/LIT-C-8) aufrechtzuerhalten (separate erhältlich).

9 35 Black-LEDs und Lichtblitz (falls zutreffend)

Austauschbare Module (siehe Blitzlicht-Modul Installation Abschnitt, für weitere Details).

10 Batteries-chalter

Wählen Sie die Energiequelle, bezüglich der verwendeten Art von Batterien.

11 Konfigurations-Bildschirm

Zeigt den Akkuladezustand, Datum, Anzahl der aufgenommenen Dateien, Fehlermeldun-gen und Einstellungsmöglichkeiten an.

12 BUSY-LED Leuchtet auf, wenn die Kamera aufnimmt.

13 Bedienschalt-fläche

Tasten zum bedienen der Kamera.

14 ON/OFF Ermöglicht das Ein/Ausschalten der Kamera

15 Batteriefach Verwenden Sie 6 Alkaline oder Lithium AA-Batterien (LR6) oder einen wiederauflad-baren Lithium-Akku-Pack (LIT-09/LIT-C-8, separate erhältlich).

16 TV-Ausgang Um Fotos/Videos direkt auf einem Fernseher zu sehen.

17 USB-Anschluss

Um Fotos/Videos auf Ihren Computer zu übertragen.

18 SD-Kartens-teckplatz

Für Foto/Video-Aufnahmen wird eine SD-Karte benötigt. Die Kamera ist kompatibel mit SD/SDHC Speicherkarten, bis zu 32GB (nicht enthalten).

19 DISTANCE RAD

Regelt die Weite der Erfassung und die Empfin-dlichkeit des Bewegungsmelders.Im DISTANZ-Abschnitt finden Sie weitere Informationen.

EiNSETZEN DEr bATTEriEN

Wir empfehlen, neue Batterien zu verwenden, um die maximale Leistung aus Ihrer Kamera herauszuholen. Weiterhin wird die

Verwendung von wiederaufladbaren AA-Batterien nicht empfohlen.

6 Alkaline AA-Batterien Lithium-Akku-PackLIT-09/LIT-C-8

Schalterstellung abhängig (von der Energiequelle)

Energiequelle Schalterstellung

• 6 AA• 12V• 12V + 6 AA

ALK

• LIT-09*• 12V + LIT-09*• Solarpanel + LIT-09*(für Kameras kompatibel mit dem Solarpanel)

LIT-09 oder RECH(anhängig von der Kamera)

* Wiederaufladbarer Lithium-Akku-Pack (LIT-09) oder mit Ladegerät (LIT-C-8), separat erhältlich.

SpEiChErKArTEN iNSTALLATioN

Legen Sie eine SD/ SDHC (bis zu 32GB) in den Kartenschlitz. Wenn ein klicken zu hören ist, wurde die Karte korrekt eingelegt.

Vor dem Einsetzen oder Entfernen einer Speicherkarte, schalten Sie die Kamera

immer vorher aus, um einen Verlust oder eine Beschädigung von den bereits vorhandenen Aufnahmen zu verhindern.

bLiTZLiChT-moDUL iNSTALLATioN (falls zutreffend)

Installieren Sie das Blitzlicht-Modul, um bei Tag und Nacht Farbaufnahmen zu erhalten.

Es ist nicht möglich mit dem Blitzlicht- Modul Videos in der Nacht aufzunehmen.

manuale d’istruzione per avvio veloce

v1.2

modelli: BF-6/S-BF-6BF-8/S-BF-8HD-72N1ECLYPSEM8

P INTSPY INTPSPY

Telecamera per sorveglianzaAdventure series







Avvio

Impostazioni

Messaggi d’errore

1

2

3

4 Istruzioni completewww.spypoint.comwww.spypoint.info

CompoNENTi

Avvio

1

2

3

4

56

7 8

15

12

13

11

14

10

19

18

17

16

9

1Consiglio pratico! Staccate la parte desiderata di queste istruzioni ed applicatela all’interno della carcassa della telecamera.

1 Lente fotografica

Sensore d’immagine e filtro infrarossi.

2 LED neri invisibili o LED infrarossi (in base alla telecamera)

Illuminazione notturna per immagini e video in bianco/nero

3 LED test (si trova in alto a destra nelle telecam-era con 35 LED)

Lampeggia nella modalità SET/TEST, se la telecamera rileva un movimento. Nella modalità Photo/Video il LED lampeggia 60 secondi, per permettere all’utilizzatore di allontanarsi senza essere ripreso.

4 Lente Fresnel Ampia l’area di sorveglianza del sensore di movimento ed aumenta la sensibilità della telecamera.

5 Attacco 12V Questa telecamera può essere alimentata dall’entrata esterna 12-V-DC, ad esempio con batteria 12V o adattatore 12V (ottenibile separatamente).

6 Filettatura per treppiede

Possibilità di fissaggio con filettatura standard ¼-20”.

7 Microfono (se corrisponde)

Per riprese audio, alzate la protezione in gomma e ruotatela sul lato per liberare il microfono.

8 Entrata pannello solare (se corrisponde)

Permette di attaccare un pannello solare (SP-12V), per mantenere la carica del pacco batteria al lithio (LIT-09/LIT-C-8) (ottenibile separatamente).

9 35 Black-LED e Flash (se cor-risponde)

Moduli sostituibili (vedasi parte relative a modulo flash per ulteriori dettagli)

10 Interruttore batteria

Selezionate la fonte d’energia riferita al tipo di batteria.

11 Schermata di configurazione

Indica lo stato di carica delle batterie, data, numero di file registrati, messaggi d’errore e modalità d’impostazione.

12 BUSY-LED Si accende, quando la telecamera riprende.

13 Telecomando Tasti per impostare la telecamera.

14 ON/OFF Interruttore per accensione/spegnimento della telecamera

15 Vano batterie Utilizzate 6 batterie alcaline oppure al litio AA (LR6) oppure un pacco batteria ricaricabile al li-tio (LIT-09/LIT-C-8, ottenibile separatamente).

16 Uscita TV Per visualizzare foto/video direttamente nel televisore.

17 Presa USB Per inviare foto/video sul suo computer.

18 Lettore SD Per registrazioni foto/video si necessita di scheda SD. La telecamera è compatibile con SD/SDHC fino a 32 GB (non compresa).

19 RUOTA DISTANCE

Regola l’area di rilevazione e la sensibilità del rilevatore di movimento. Nella parte DISTANZA trovate ulteriori informazioni.

iNSErimENTo DELLE bATTEriE

Consigliamo di utilizzare batterie nuove, per avere il Massimo della telecamera. Inoltre si sconsiglia l’uso di batterie ricaricabili.

6 pile alcaline AA Pacco pile LithioLIT-09/LIT-C-8

Posizione interruttore (dipendente dalla fonte d’energia)

Fonte d’energia Posizione interrutore

• 6 AA• 12V• 12V + 6 AA

ALK

• LIT-09*• 12V + LIT-09*• Pannello solare + LIT-09*(per telecamere compatibili con pannelli solari)

LIT-09 o RECH(in base alla telecamera)

* Pacco batteria ricaricabile al litio (LIT-09) o con caricabatteria (LIT-C-8), ottenibili separatamente.

iNSTALLAZioNE SChEDE mEmoriA

Inserisca una scheda memoria SD/ SDHC (fino a 32GB) nell’apposita fessura. Se è udibile un click la scheda è stata inserita correttamente.

Prima di inserire o di togliere una scheda memoria, spegnete sempre la telecamera, per evitare il danneggiamento o la perdita di dati registrati.

iNSTALLAZioNE moDULo FLASh (se corrisponde)

Installate il modulo flash per avere immagini a colori sia di notte che di giorno.

Non è possibile registrare video di notte con il modulo flash.

manual de inicio rápidov1.2

modelos: BF-6/S-BF-6BF-8/S-BF-8HD-72N1ECLYPSEM8

P INTSPY INTPSPY

Cámara de vigilanciaAdventure series







Para empezar

Ajustes

Mensajes de error

1

2

3

4 Instrucciones completaswww.spypoint.comwww.spypoint.info

Para empezar

1

2

3

4

56

7 8

15

12

13

11

14

10

19

18

17

16

9

1¡Consejo práctico! recorte el fragmento deseado de este manual y guárdelo en el bolsillo de la carcasa destinado para ello.

1 Lentes fotográficas

Sensor de imágenes y filtro de infrarrojos.

2 LED invisibles de color negro o Luz de prueba(dependiendo de la cámara)

Iluminación nocturna para fotos y vídeos en blanco y negro.

3 Luz de prueba(colocada en el extremo superior derecho en los modelos con 35 LEDs)

Parpadea en el modo SET/TEST cuando la cámara ha detectado un movimiento. En el modo PHOTO/VIDEO la luz LED parpadea durante 60 segundos para permitir al usuario retirarse sin ser fotografiado.

4 Lente Fresnel Permite ampliar el área de detección del sen-sor de movimiento y aumentar la sensibilidad de la cámara.

5 Conexión 12V Esta cámara puede ser alimentada por la en-trada externa de 12 voltios DC, por ejemplo con baterías de 12V o un adaptador de 12V (disponible por separado).

6 Trípode Fijación para un inserto roscado estándar de ¼-20”.

7 Micrófono(si está disponible)

Para realizar grabaciones de audio levante la funda de plástico y dele la vuelta ligeramente para dejar el micrófono libre.

8 Entrada del panel solar(si está disponible)

Permite instalar un panel solar (SP-12V), para mantener la carga de la batería de litio (LIT-09/LIT-C-8) (disponible por separado).

9 LEDs 35 negras y Flash (si está disponible)

Módulos intercambiables (véase la sección módulo de flash para más detalles)

10 Interruptor de la batería

Seleccione la fuente de energía dependiendo del tipo de baterías empleadas.

11 Pantalla de configuración

Muestra el estado de la batería, la fecha, el número de archivos almacenados, los men-sajes de error y las opciones de ajustes.

12 BUSY-LED Se ilumina cuando la cámara graba.

13 Botones de ajustes

Botones para utilizar la cámara.

14 ON/OFF Permite apagar y encender la cámara.

15 Comparti-mento de las pilas

Utilice 6 pilas alcalinas o de litio AA (LR6) o una batería de litio recargable (LIT-09/ LIT-C-8, disponibles por separado).

16 Salida de TV Para poder visualizar fotos y vídeos directa-mente en la televisión.

17 Conexión USB Para poder transferir fotos y vídeos a su ordenador.

18 Ranura de la tarjeta SD

Para realizar grabaciones de vídeo o foto-grafías es necesaria una tarjeta SD. La cámara es compatible con tarjetas de memo-ria SD/SDHC de hasta 32GB (no incluidas).

19 RUEDA DE DISTANCE

Permite ajustar la distancia de detección y la sensibilidad del detector. Véase la sección DISTANCE para más información.

CoLoCACiÓN DE LAS bATErÍAS

Le recomendamos emplear nuevas pilas para obtener los mejores resultados de su cámara. Además, no se recomienda el uso de baterías AA recargables.

6 pilas alcalinas AA Una batería de litioLIT-09/LIT-C-8

Posición del interruptor (en función de la fuente de energía

Fuente de energía Posición del interruptor

• 6 AA• 12V• 12V + 6 AA

ALK

• LIT-09*• 12V + LIT-09*• Panel solar + LIT-09*(para cámaras compatibles con panel solar)

LIT-09 o RECH(dependiendo de la cámara)

* Batería de litio recargable (LIT-09) o mediante cargador (LIT-C-8), disponibles por separado.

CoLoCACiÓN DE LA TArJETA DE mEmoriA

Inserte una tarjeta de memoria SD/SDHC (de hasta 32GB) en la ranura para tarjetas. Cuando oiga clic esto significará que la tarjeta ha sido correctamente colocada.

Antes de insertar o retirar la tarjeta de memoria, apague la cámara para prevenir

que las imágenes ya tomadas sean dañadas o borradas.

CoLoCACiÓN DEL FLASh (si está disponible)

Instale el módulo de flash, para poder hacer fotografías a color de noche y de día.

No es posible grabar vídeos con el módulo de flash por la noche.

5

Components

Photo lens Invisible LEDs or Infrared LEDs (HD-7)

Test light (located at the top right for models with 35 LEDs)

Light sensor Fresnel lens

1

2

3

4

5

12V power jack Tripod mount Microphone (BF-8, HD-7, ECLYPSE, M8)

Solar panel jack (BF-8, HD-7, ECLYPSE, M8, C6)

35 invisibles LEDs and Flash (2N1)

8910

11

12

TV OUT USB port SD card slot DISTANCE dial

20

21

22

23

Access to the time battery Battery switch Configuration screen BUSY Led Switch panel ON/OFF Battery case

13

14

15

16

17

18

19

Slot for installation strap Cable lock hole

6

7

8 910

11

12

23

22

21

201

2

3

5

419

16

17

15

18

14

13

6

7

6

1 Photo lens Image sensor and infrared filter.2 Invisible LEDs or

Infrared LEDs (HD-7)Night lighting to obtain black and white photos and videos.

3 Test light (located at the top right for models with 35 LEDs)

Flashes in SET/TEST mode when there is detection and flashes 60 seconds in PHOTO/VIDEO mode to allow the user to leave with-out being photographed or recorded.

4 Light sensor Allows the lighting of the LEDs panel at night.5 Fresnel lens Expands the detection area and increases the

sensitivity of the camera’s motion sensor.6 Slot for installation

strapAllows the user to install the camera using the installation strap included (p.10).

7 Cable lock hole Allows the user to install a CL-6FT cable lock,sold separately (p.17).

8 12V power jack This camera can be powered from an external 12-volt DC input such as a 12V battery or a 12V adapter, each sold separately (p.16).

9 Tripod mount Standard ¼-20" tripod mount.10 Microphone

(BF-8, HD-7, ECLYPSE, M8)

Record sound in video mode (p.13).

11 Solar panel jack(BF-8, HD-7, ECLYPSE, M8, C6)

Allows the user to connect a solar panel (SP-12V) to maintain the charge of the lithium battery pack (LIT-09/LIT-C-8), sold separately (p.16).

12 35 invisible LEDs and Flash (2N1)

Interchangeable units (p.9).

Components

13 Access to the time battery

Battery that keeps the time and date in memory (p.8).

14 Battery switch Allows the user to select the power source ac-cording to the type of batteries used (p.7).

15 Configuration screen To see battery level, date, number of record-ed files, error messages and settings options (p.10).

16 BUSY LED Lights up when the camera is recording (p.9).

17 Switch panel Buttons to set the camera (p.10).18 ON/OFF Allows the user to turn on/off the camera.19 Battery case Case for AA batteries or a rechargeable

lithium battery pack (p.7).20 TV OUT Allows the user to view or delete photos/

videos directly on TV (p.11).21 USB port To transfer photos/videos to a computer

(p.14)22 SD card slot An SD card is required to record photos/

videos (p.9).23 DISTANCE dial Allows the user to adjust the distance of

detection and the sensitivity of the detector (p.12).

7

PowerThe battery level is shown on the LCD screen. When a single line remains, the camera will continue to take photos but we strongly recommend to change the AA batteries or charge the lithium battery pack before they are empty (see figure below). If a video is being recorded and the batteries level reaches 0%, the camera saves the file before shutting down.

AA BATTERIESThis camera requires 6 AA batteries (1.5V). The use of alkaline or lithium batteries is strongly recommended. During the installation of the AA batteries, slide the battery switch to ALK (i.e. alkaline). Insert the batteries as indicated inside the battery case. Battery polarity must be followed.

Please note that the voltage of rechargeable AA batteries (1.2V) is insufficient to power the SPYPOINT camera. We also recommend the

use of new batteries to ensure maximum performance of the camera.

LITHIUM BATTERY PACKThis SPYPOINT camera can be powered by a rechargeable lithium battery pack LIT-09/LIT-C-8 (sold separately, p.16). This type of battery is less affected by cold temperatures and lasts up to 3 times longer than an alka-line batteries. During the installation of the lithium battery, slide the battery switch to LIT-09 or RECH (depending on the camera).

EXTERNAL (12V)This camera can also be powered by an external 12-volt DC input such as a 12-volt battery (KIT-12V, BATT-12V or KIT6V/12V) or a 12-volt adap-ter (AD-12V), sold separately (p.16). During the installation of a 12-volt connection, slide the battery switch to ALK (the AA batteries can remain safely inside the camera). If combined with a lithium battery pack, slide the battery switch to LIT-09 or RECH (depending on the camera). For the 12V available accessories, see p.16.

SOLAR PANEL (BF-8, HD-7, ECLYPSE, M8, C6)This camera also offers the possibility to connect a solar panel (SP-12V sold separately, p.16) to maintain the charge of the lithium battery pack (sold separately, p.16). While installing the rechargeable lithium battery pack, slide the battery switch to LIT-09 or RECH (depending on the camera) to activate the charging system of the solar panel.

Battery switch position (depending on the power source)

Power source Battery switch position• 6AA• 12V• 12V + 6AA

ALK

• LIT-09*• 12V + LIT-09*• Solar panel + LIT-09*(for cameras compatible with solar panel)

LIT-09 or RECH(depending on the camera)

* Rechargeable lithium battery pack, sold separately (LIT-09) or with a charger (LIT-C-8).

6 alkaline AA batteries

Lithium battery packLIT-09/LIT-C-8

8

PowerTIME BATTERYThe camera has a CR2032 lithium button battery which saves the time and date. To replace the battery:

1. Turn off the camera and remove it from the housing.2. Using a flat screwdriver, push the tab to the right.

3. While pushing the tab, remove the compartment of the camera.

4. Replace the battery, the polarity must be respected (side + facing up).

9

Memory card/ Flash unit/ "BUSY" LEDMEMORY CARDA memory card is required to record photos and videos. The camera is compatible with SD/SDHC memory cards, up to 32 GB capacity. (sold separately, p.16).

When the camera is ON and no memory card is used, the screen displays "CArd" meaning to insert one. When the SD card is full, the screen displays "FUL".

Here is a table of the approximate number of photos and length of videos that can be recorded with different memory card capacities. Many photo and video resolutions are noted, see those corresponding to the camera.

4 GB 8 GB 16 GB 32 GBPhoto3 MP 4100 8200 16400 328004 MP 3800 7600 15200 304005 MP 3400 6800 13600 273006 MP 3200 6300 12600 253007 MP 2700 5500 10900 218008 MP 2400 4800 9500 1900010 MP 1900 3800 7600 1520012 MP 1600 3200 6300 12600Video320 x 240 4 h 8 h 16 h 32 h640 x 480 2h10 4h10 8h20 16h401280 x 720 40 min 1h20 2h40 5h20

INSERTING THE MEMORY CARDInsert an SD/SDHC memory card (up to 32 GB capacity) in the card slot. The card is inserted correctly when a click is heard.

Before inserting or removing a memory card, always turn off the camera to prevent loss or

damage of the photos already recorded.

REMOVING THE MEMORY CARDLightly press the memory card into the camera once to pop it out of the slot and remove it.

FLASH UNIT (2N1)

Install the Flash unit to obtain color photos by day and night.

It is not possible to take videos at night with the Flash unit.

"BUSY" DELThe "BUSY" light, located to the right of the screen lights up when the camera records a file.

10

Settings

A: Photo quality (High/ Low)B: Number of recorded filesC: Date/Time (MM/DD/YY, hh:mm)D: Temperature (Celcius/Farenheit)(BF-6, BF-8, HD-7, M8, C6)

1. Turn OFF the camera.2. Set the switch MODE to SET/TEST.3. Turn ON the camera. 4. Press MENU/OK. An "H" will flash on the screen to indicate that the camera is in High Resolution. Use the DOWN button if you want to reduce the resolution to "L".5. Press MENU/OK to set the date and time (mm/dd/yy, hh/mm). Use UP and DOWN to change the blinking digit.6. If applicable, press MENU/OK to go to the next option. Choose "F" or "C" to display the temperature in Fahrenheit (°F) or Celsius (°C).7. Once finished, press MENU/OK and turn OFF the system to save the changes.

MODEPHOTOAllows the user to take photos. When the PHOTO mode is selected, the test light in front of the camera will flash for 60 seconds to allow the user to leave the area without being photographed.

VIDEOAllows the user to take videos. When the VIDEO mode is selected, the test light in front of the camera (see above) will flash for 60 seconds to allow the user to leave the area without being recorded.

SET-TESTAllows the user to test the detection system of the camera. When the SET/TEST mode is selected, no photo or video is recorded. Pass in front of the camera from left to right. When the camera detects a motion, the test light blinks to indicate that the camera would normally have saved a photo or video. If the system does not detect the movement, increase the detection distance using the DISTANCE wheel or realign the system differently.

INSTALLATION WITH THE SUPPLIED STRAP

Recommended installation height: about 3 feet above the ground.Do not place the camera facing the sun.

Note: When the photo resolution is set to "L", the video resolution is automatically set to 320 x 240 or 640 x 480 (HD-7) and if the photo reso-lution is set to "H", the video resolution is automatically set to 640 x 480 or 1280 x 720 (HD-7).

1. Insérez l’extrémité de la courroie dans la fente qui se trouve au dos du mécanisme.

2. Insérez la courroie dans la fente sous le levier et faites-la ressortir en arrière.

3. Créer une tension sur la courroie en la tirant vers la droite, puis rabattez vers la gauche le levier pour maintenir la position.

A

D

B

C

1 2 3

4

1

11

Here are the different moon phases that can be printed on photos. (BF-6, BF-8, HD-7, 2N1, M8, C6)

New moon: Waxing Crescent: First Quarter: Waxing Gibbous: Full moon: Waning Gibbous: Last Quarter: Waning crescent:

DELAYAllows the user to choose the time interval between each detection before the camera records the next photo or video.

Additional setting: It is possible to decrease the delay between detections to 10 seconds (instead of 1 minute) by using the following procedure. Note that the battery life will be affected.

1. Turn OFF the camera.2. Press and hold the UP button, turn the camera on. "10_S" appears on the screen meaning the 1 minute delay has been replaced by a 10 second delay. 3. To reset the camera to 1 minute delay, follow the same procedure. "1_M" appears on the screen (see figure below).

MULTI-SHOTTakes up to 4 consecutive shots at each detection, with a 10 second delay between each photo. For the cameras with a Flash unit, the delay between each photo will be 15 seconds. This option allows the user to get up 4 photos from different angles when the camera is in PHOTO mode.

VIDEO LENGTHAllows the user to select the duration of the recording when the camera is set in VIDEO mode.

VIEWAllows the user to view or delete recorded photos and videos directly on a television.

1. Turn OFF the camera.2. Set the switch MODE to VIEW. 3. Connect the yellow end of the RCA cable (supplied) into the VIDEO IN of the TV and the other end into the TV OUT of the camera.

4. Turn ON the camera and the last recorded photo or video will appear. To change the photo or the video, use the UP or DOWN button.

Here are the options available by pressing MENU/OK:

View Date/Time: Allows the user to view the date and time printed on the photo.

Protect: Allows the user to protect a photo or video to prevent it from being deleted by selecting "Erase All".

Erase one: Allows the user to erase the photo or the video seen on the screen from the memory card.

Erase all:Allows the user to erase all stored photos and videos, with the exception of protected photos and videos from the memory card.

Format: Allows the user to erase the entire contents of the memory card, including the protected files.

Language: Allows the user to change the display language.

Exit: Allows the user to exit the menu to return to theviewing screen.

Settings

10_5

10 s delay 1 min delay

2

3

4

RCA

12

DISTANCETurn the DISTANCE dial to the right to increase the detection distance and the sensitivity of the detector.

The camera is equipped with a detector sensitive to infrared. The system will only detect a heat source in motion. The greater the mass of heat, the more sensitive the system is. The range of detection is between 5 and 65 feet. The best way to adjust the distance is to set the camera to SET/TEST mode. Make sure to have the least amount of objects possible in front of the camera during positioning. This will prevent photos being taken by the camera when oriented towards the sun at the same time an object moves in front of the camera (e.g. a branch).

Here is a table of approximate detection distances and width of the detection area according to the DISTANCE dial setting. The data can be affected by the size of the subject and the outside temperature. Note that this data is for illustrative purposes only.

Value on dial Sensitivity

Detection distance

(ft)

Width of the detection area (ft)

MIN.

Gradually increases

5-30 32

430-50 15

6

850-65 30

MAX.

Settings

CAMERA

3

15

30

13

Sound recording (BF-8, HD-7, ECLYPSE, M8)

The SPYPOINT camera offers the possibility to record sound in VIDEO mode. When the VIDEO mode is selected, the camera automatically re-cords the sound. Under the camera, you will find a rubber cap with the inscription MIC. If the user does not want to record the sound, the rubber cap needs to stay in place. If sound recording is required, the user must lift the rubber cap and turn it slightly so that the microphone receiver is completely cleared (See figure below).

14

File transfer to a computerTo transfer photos/videos to a computer:

1. Turn OFF the camera.2. Connect the USB cable (supplied) from the camera to a computer

3. The computer will detect the camera and install the driver automatically.4. Click on "My Computer" and select "Removable Disk". 5. Then click on "DCIM" and "100DSCIM" to find all recorded photos and videos.6. Drag or save the files to the desired location.

Taking the memory card out (sold separately, p.16) of the camera and inserting it into the computer slot will achieve the same results.

Note: Videos in .MP4 format require the use of a compatible video playersoftware such as VLC, Windows Media Player or QuickTime.

USB

15

Troubleshooting/ Error messagesTROUBLESHOOTING

Problem Possible solutionsImpossible to turn on the camera

• Verify if there are batteries in the camera.• Verify if the batteries are correctly installed (p.7)• Verify if the battery switch position is positioned according to the power source (p.7).• Install the latest update (available on www.spypoint.com under SUPPORT section).• Replace alkaline batteries or recharge the lithium battery pack.

The screen of thecamera turns off

• The camera may be set to PHOTO or VIDEO mode and the screen turns off after a period of 60 seconds in order to preserve battery life. • To return to the screen, turn off the camera and turn it on again.

The camera does not respond

• Remove the batteries and reinstall them (p.7).• Replace alkaline batteries or recharge the lithium battery pack.

The camera works, but is losing its time and date settings

• The time battery must be replaced (p.8).

Impossible to take photos/videos

• Verify if there are batteries in the camera.• Replace alkaline batteries or recharge the lithium battery pack.• Memory card is full.• Verify if the camera is turned on.

No person/animal on photos

• Sunrise or sunset can trigger the sensor. Camera must be re-orientated.• At night, the motion detector may detect beyond the range of the IR illumination. Reduce distance setting (p.12).• Small animals may trigger the unit. Reduce distance setting (p.12) and/or raise height of camera.• Motion detector may detect animals through foliage.• If a person or animal moves quickly, it may move out of the camera’s field of view before the photo is taken. Move the camera further back or redirect the camera.• Make sure the mounting post or tree is stable and does not move.

Red light in front of the camera blinks

• MODE switch is in SET/TEST.• MODE switch is in PHOTO or VIDEO. The red light in front of the camera flashes for 60 seconds to allow the user to leave without being photographed or recorded.

The photos/videos do not appear on the television

• Verify if the camera is correctly connected to the television using the RCA cable (p.11).• Verify if the memory card contains photos/videos.

The computer does not recognize the camera

• Verify if the camera is properly connected to the computer using the USB cable (p.14).

The computer can’t play videos

• The .MP4 video format requires the use of a video player software compatible such as VLC, Windows Media Player or QuickTime.

ERROR MESSAGES

There is no memory card in the camera, insert a card.

The memory card is full, delete the files or use a new memory card.

http://support.spypoint.com/EN/

16

Available accessoriesTo obtain more information on the available accessories, go to www.spypoint.com. Here are the main accessories available:

POWER

12-volt Adaptor #AD-12V, AC adaptor (6V to 12V). Powers the camera from an elec-trical outlet.

Rechargeable 6V-12V battery, charger & housing kit #KIT6V-12V, Universal kit with two 6V rechargeable batteries (2.8Ah), with 6V (5.6Ah) and 12V (2.8Ah) output configuration and AC charger. Water resistant ABS plastic case, 12 ft power cable and strap included. Camo pattern. Compatible with all SPYPOINT pro-ducts equipped with a 12V power jack.

12V DC Power cable#CB-12FT, 12 ft power cable with alligator clips at one end to connect a 12V battery to a camera.

Spare power cable#PW-12FT, Spare 12 ft power cable, to connect the camera to the KIT-12V.

Rechargeable 12V battery, charger & housing kit#KIT-12V, 12-volt 7.0Ah rechar-geable battery with a water resis-tant ABS plastic case, AC charger, 12 ft power cable (#PW-12FT) and carrying strap included. Compa-tible with all SPYPOINT products equipped with a 12V power jack.

Solar panel (BF-8, HD-7, ECLYPSE, M8, C6)#SP-12V, Solar panel with adjus-table steel mounting kit. Maintains the charge of the lithium battery pack directly into compatible de-vices. Can also be combined with any 12-volt battery. 9 ft power cable.

Rechargeable 12V battery & charger set#BATT-12V, 12-volt 7.0Ah rechar-geable battery and AC charger to power the camera.

Lithium battery pack#LIT-09, Additional rechargeable lithium battery pack fits most SPYPOINT products.

Lithium battery pack & charger#LIT-C-8, Rechargeable lithium battery pack and AC charger with charge indicator light. Fits most SPYPOINT products.

MEMORY CARD

SD Memory card 8GB#SD-8GB, SDHC memory card 8 GB, High speed Class 6.

17

Available accessories

INSTALLATION AND SECURITY

Steel security box#SB-91, Steel box to secure the camera against theft. It also prtects it from breakage caused by bears or other animals. Fits all SPYPOINT 5.1" W x 6.9" H x 2.6" D cameras (except TINY, LIVE, SMART and SUMMIT PRO series). Also available in black.

Cable lock#CL-6FT, 6 ft cable lock fits all SPYPOINT cameras.

Camera mount#MA-360, Adjustable mounting arm, fits all cameras that have a standard ¼-20” tripod mount. It can rotate 360° and tilt approx +/-90°. Also available in black.

Tripod #TP-CAM, SPYPOINT Lightweight tripod, in black aluminum, with a unique anchor system and a re-movable quick release plate. Max. height: 4.9 ft (1.5 m), min. height: 1.7 ft (0.5 m), max. load weight: 11 lbs (5 kg). Fits most SPYPOINT products.

INFRARED BOOSTER

IR-Booster#IRB-W, 100 LED wireless infra-red module that allows the user to amplify the strength of the infra-red lights for clearer night shots.

Invisible LEDs IR-Booster#IRB-W-B, 100 invisible LEDs (completely invisible to the naked eye) wireless infrared module that allows the user to amplify the infrared lights at night for clearer shots. Compatible with REMOS technology. When used with REMOS compatible cameras, the transmitter is not necessary.

18

Specifications (BF-6)

Photo recording

Photo resolution 3 MP, 6 MPFile format JPGMulti-shot mode Up to 4 photos per detectionStamp (only on photos) Date, time, temperature (°C/°F) and

moon phaseCapture mode Color by day, black and white by nightVideo recordingVideo resolution 320 x 240, 640 x 480File format AVISequence length Adjustable from 10 to 90 sCapture mode Color by day, black and white by nightMemory storageSupport •Internal memory : none

•External memory : SD/SDHC card (up to 32 GB)

ViewingTV output Composite video (PAL/NTSC)Computer output USB 2.0Power sourceAccessories sold separately, p.16Alkaline or lithium batteries 6 x AALithium battery pack Rechargeable battery pack

(LIT-09/LIT-C-8)External (12V jack) 12V battery (KIT6V-12V, KIT-12V, BATT-

12V) or 12V adapter (AD-12V)Detection systemMotion sensor PIRDetection angle 30°Detection range Adjustable from 5 to 65 ftDelay between each detection Adjustable from 1 to 15 min

*Additional 10 s setting

Night time illumination systemLEDs 35 LEDsType Invisible LEDsExposure Automatic infrared level adjustmentOptical field of view50°Dimensions5.1” W x 6.9” H x 2.6” DRecommendationsOperating temperature (-4 °F to +122 °F) (-20 °C to + 50 °C) Storage temperature (-22 °F to +167 °F) (-30 °C to + 75 °C)

19

Specifications (BF-8)

Photo recording


moon phaseCapture mode Color by day, black and white by nightVideo recordingVideo resolution 320 x 240, 640 x 480File format AVISequence length Adjustable from 10 to 90 sCapture mode Color by day, black and white by night

AudioSound recording (Automatically recorded in video mode)

Mono

Memory storageSupport •Internal memory : none

•External memory : SD/SDHC card (up to 32 GB)


(LIT-09/LIT-C-8)External (12V jack) 12V battery (KIT6V-12V, KIT-12V,

BATT-12V) or 12V adapter (AD-12V)Solar panel Solar panel (SP-12V) combined with

rechargeable battery pack (LIT-09/LIT-C-8)

Detection systemMotion sensor PIRDetection angle 30°Detection range Adjustable from 5 to 65 ftDelay between each detection Adjustable from 1 to 15 min

*Additional 10 s settingNight time illumination systemLEDs 46 LEDsType Invisible LEDsExposure Automatic infrared level adjustmentOptical field of view50°Dimensions5.1” W x 6.9” H x 2.6” DRecommendationsOperating temperature (-4 °F to +122 °F) (-20 °C to + 50 °C) Storage temperature (-22 °F to +167 °F) (-30 °C to + 75 °C)

20

Specifications (HD-7)

Photo recording


moon phaseCapture mode Color by day, black and white by nightVideo recordingVideo resolution 640 x 480, 1280 x 720 (HD 720p)File format AVISequence length Adjustable from 10 to 90 sCapture mode Color by day, black and white by nightAudioSound recording (Automatically recorded in video mode)

Mono

Memory storageSupport • Internal memory : none

• External memory : SD/SDHC card (up to 32 GB)





Detection systemMotion sensor PIR on the camera Detection angle 30°Detection range Adjustable from 5 to 65 ftDelay between each detection Adjustable from 1 to 15 min

*Additional 10 s settingNight time illumination systemLEDs 46 LEDsType Infrared LEDsExposure Automatic infrared level adjustmentOptical field of view50°Dimensions5.1” W x 6.9” H x 2.6” DRecommendationsOperating temperature (-4 °F to +122 °F) (-20 °C to + 50 °C) Storage temperature (-22 °F to +167 °F) (-30 °C to + 75 °C)

21

Specifications (2N1)

Photo recording

Photo resolution 3 MP, 5 MPFile format JPGMulti-shot mode Up to 4 photos per detectionStamp (only on photos) Date, time and moon phaseCapture mode Color by day and night (with flash)

Black and white by night (with IR)Video recordingNote: It is recommended to use the IR unit when the camera is set to VIDEO mode.Video resolution 320 x 240, 640 x 480File format AVISequence length Adjustable from 10 to 90 sCapture mode Color by day, black and white by night

(with IR)*Video available at night with the IR unit only





BATT-12V) or 12V adapter (AD-12V)


*Additional 10 s settingNight time illumination systemLEDs 35 LEDsType Invisible LEDsFlash Flash unit

Exposure Automatic infrared level adjustmentOptical field of view50°Dimensions5.1” W x 6.9” H x 2.6” DRecommendationsOperating temperature (-4 °F to +122 °F) (-20 °C to + 50 °C) Storage temperature (-22 °F to +167 °F) (-30 °C to + 75 °C)

22

Specifications (ECLYPSE)

Photo recording

Photo resolution 3 MP, 5 MPFile format JPGMulti-shot mode Up to 4 photos per detectionStamp (only on photos) Date, timeCapture mode Color by day, black and white by nightVideo recordingVideo resolution 320 x 240, 640 x 480 File format AVISequence length Adjustable from 10 to 90 sCapture mode Color by day, black and white by night


Mono


• External memory : SD/SDHC card (up to 32GB)






*Additional 10 s settingNight time illumination systemLEDs 35 LEDsType Invisible LEDsExposure Automatic infrared level adjustmentOptical field of view50°Dimensions5.1” W x 6.9” H x 2.6” DRecommendationsOperating temperature (-4 °F to +122 °F) (-20 °C to + 50 °C) Storage temperature (-22 °F to +167 °F) (-30 °C to + 75 °C)

23

Specifications (M8)

Photo recording


moon phaseCapture mode Color by day, black and white by nightVideo recordingVideo resolution 320 x 240, 640 x 480File format AVISequence length Adjustable from 10 to 90 sCapture mode Color by day, black and white by night


Mono








*Additional 10 s settingNight time illumination systemLEDs 46 LEDsType Invisible LEDsExposure Automatic infrared level adjustmentOptical field of view50°Dimensions5.1” W x 6.9” H x 2.6” DColorSpecial hunting camouflage pattern officially licensed LOST CAMO®

RecommendationsOperating temperature (-4 °F to +122 °F) (-20 °C to + 50 °C) Storage temperature (-22 °F to +167 °F) (-30 °C to + 75 °C)

24

Specifications (C6)

Photo recording


moon phaseCapture mode Color by day, black and white by nightVideo recordingVideo resolution 320 x 240, 640 x 480File format AVISequence length Adjustable from 10 to 90 sCapture mode Color by day, black and white by nightMemory storageSupport • Internal memory : none



(LIT-09/LIT-C-8)External (12V jack) 12V battery (KIT6V-12V, KIT-12V, BATT-

12V) or 12V adapter (AD-12V)Solar panel Solar panel (SP-12V) combined with



*Additional 10 s setting

Night time illumination systemLEDs 46 LEDsType Invisible LEDsExposure Automatic infrared level adjustmentOptical field of view50°Dimensions5.1” W x 6.9” H x 2.6” DOperating temperature (-4 °F to +122 °F) (-20 °C to + 50 °C) Storage temperature (-22 °F to +167 °F) (-30 °C to + 75 °C)

25

RegulationFCC REGULATIONSFCC Part l5

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal

Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequen-cy energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC rules. Opera-tion is subject to the following two conditions: (1) this device may not cau-se harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Hereby, GG Telecom declares that this camera is in compliance with the essential requirements and other relevant provisions of Directive

99/5/EC. The user can obtain a copy of the Declaration of Conformity by e-mail at [email protected].

26

RegulationFCC REGULATIONSFCC Part l5

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal

Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequen-cy energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC rules. Opera-tion is subject to the following two conditions: (1) this device may not cau-se harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Hereby, GG Telecom declares that this camera is in compliance with the essential requirements and other relevant provisions of Directive

2004/108/EC. The user can obtain a copy of the Declaration of Conformity by e-mail at [email protected].

27

Limited warranty and repair (2N1 only)This SPYPOINT product designed by GG Telecom, is covered by a one (1) year warranty for 2N1 cameras purchased before 2014; two (2) years war-ranty for 2N1 cameras purchased from 2014. This Material and Workman-ship warranty applies from the original date of purchase. The sales receipt is your proof of purchase and must be presented if warranty service is needed. This warranty will be honored in the country of purchase only.

This warranty does not cover any GG Telecom product which has been subjected to misuse, neglect and accidents or has been improperly used or maintained. In addition, this warranty is not applicable for all products purchased online from an unauthorized dealer. Any modification or tam-pering of the product will affect its operation, performance, durability and voids this warranty.

INSTRUCTIONS FOR REPAIR SERVICEGG Telecom will repair the product without charge or replace it at its discre-tion with an equivalent product, if it has a manufacturing defect covered by the warranty described previously. We will pay the shipping costs only for the return of the products covered by the warranty. The shipping costs for an item sent to us will be assumed by the costumer.

Repairs for damages not covered by the warranty will be subject to a reasonable charge. The customer will pay all shipping costs.

1. BEFORE sending a product for repair, please contact our technical support team at 1-888-779-7646 or [email protected]. Clearly describe the problem and give a phone number where we can reach you. It happens regularly that some problems can be solved over the phone. 2. If a product needs to be sent, an RMA number will be given to the customer (Return Merchandise Authorization). 3. Prepare a package for GG Telecom and include the original receipt or a copy. 4. Write the RMA number on the outside of the package and send it to:

CANADA United States GG Telecom GG Telecom 120 J.Aurèle-Roux 555 VT route 78 Victoriaville, QC Swanton, Vermont G6T 0N5 05488

IMPORTANT: Under no circumstances will GG Telecom accept returned products without a Return Material Authorization number (RMA). It is essential to contact us before making a return.

The customer is liable for loss or damage to the product that may occur during the transport to GG Telecom. We recommend you to use a traceable method of shipping to ensure your protection.

WWW.SPYPOINT.COM

28

Limited warranty and repairThis SPYPOINT product designed by GG Telecom, is covered by a one (1) year warranty on material and workmanship starting from the original date of purchase. The sales receipt is your proof of purchase and must be presented if warranty service is needed. This warranty will be honored in the country of purchase only.

This warranty does not cover any GG Telecom product which has been subjected to misuse, neglect and accidents or has been improperly used or maintained. In addition, this warranty is not applicable for all products purchased online from an unauthorized dealer. Any modification or tam-pering of the product will affect its operation, performance, durability and voids this warranty.

INSTRUCTIONS FOR REPAIR SERVICEGG Telecom will repair the product without charge or replace it at its discre-tion with an equivalent product, if it has a manufacturing defect covered by the warranty described previously. We will pay the shipping costs only for the return of the products covered by the warranty. The shipping costs for an item sent to us will be assumed by the customer.

Repairs for damages not covered by the warranty will be subject to a reasonable charge. The customer will pay all shipping costs.

1. BEFORE sending a product for repair, please contact our technical support team at 1-888-779-7646 or [email protected]. Clearly describe the problem and give a phone number where we can reach you. It happens regularly that some problems can be solved over the phone. 2. If a product needs to be sent, an RMA number will be given to the customer (Return Merchandise Authorization). 3. Prepare a package for GG Telecom and include the original receipt or a copy. 4. Write the RMA number on the outside of the package and send it to:

CANADA United States GG Telecom GG Telecom 120 J.Aurèle-Roux 555 VT route 78 Victoriaville, QC Swanton, Vermont G6T 0N5 05488

IMPORTANT: Under no circumstances will GG Telecom accept returned products without a Return Material Authorization number (RMA). It is essential to contact us before making a return.

The customer is liable for loss or damage to the product that may occur during the transport to GG Telecom. We recommend you to use a traceable method of shipping to ensure your protection.

WWW.SPYPOINT.COM

Date post:	26-May-2018
Category:	Documents
Upload:	dokien
View:	213 times
Download:	0 times

SPYP INT ECLYPSE BF-8 M8 HD-7C6 2N1 v1.5. SPYP INT THANK YOU FOR CHOOSING A SPYPOINTPRODUCT. This...

Documents