A (mm) B (mm)

5’3” x 4’3” 1295

5’3” x 6’3” 1910

5’3” x 8’3” 2530

5’3” x 10’4” 3150

5’3” x 12’4” 3770

1606

R A N G E

Please note that this is a brand new instruction manual. If you find any mistakes or you think anything needs improving then please email me at; james@thegreenhousepeople.co.uk or phone 01782 388811

Thank you for purchasing your new Simplicity greenhouse. We recommend you familiarise yourself with the instructions and read all safety information before you commence assembly. This instruction manual is also available online at www.greenhousepeople.co.uk in our technical help section should you need to reprint it. Should you require any additional advice you can always call us on 01782 388811.

Safety WarningGlass and aluminium can potentially cause injury. Please ensure you wear protective goggles, gloves, headgear and suitable footwear when assembling and glazing the building. Please remember that glass is fragile and should be handled with extreme care. Always clear up and dispose of any breakages immediately. Do not assemble the greenhouse in high winds. For safety reasons and ease of assembly, we recommend that this greenhouse is assembled by a minimum of two people.

Site PreparationWhen selecting a site for your greenhouse, it is vital that you choose as flat and level an area as possible. A concrete or slabbed base will provide the most solid foundation for your greenhouse. IMPORTANT: Do not fix your building down until the building is fully assembled, including glazing.Avoid placing your greenhouse under trees or in other vulnerable locations. To minimise the risk of wind damage, try to select as sheltered a site as possible, e.g. beside a hedgerow or garden fence.

Additional ConsiderationsPlease bear in mind that assembling your greenhouse can be time consuming. You may need to spread the construction over two or more days. We recommend that you avoid leaving the building partially glazed. If you ever have to leave your greenhouse half assembled and not anchored down, weigh it down with slabs or bags of sand to stop the wind moving it. You will find it helpful to prepare a large, clean and clear area in which to work in. A garage floor or flat lawn area is ideal.If you have arranged for someone to install your greenhouse for you, please check that all components are included. Most parts are numbered and can be identified by a stamp or removable label. Alternatively, the components can be identified by lengths detailed in the packing list (see diagram below). Anchoring down your greenhouse should be the final stage of construction (including glazing).Once installed your greenhouse requires little maintenance, but to maintain the smooth running of your door(s) WD40 or similar can be applied to the door wheels and lower door guides.

GuaranteeYour new Simplicity greenhouse is guaranteed for 10 years against faulty manufacture of the framework. This does not include glazing, moving parts, accidental damage or wind damage.

610mm

121

121

A (mm) B (mm)

5’3” x 4’3” 1295

5’3” x 6’3” 1910

5’3” x 8’3” 2530

5’3” x 10’4” 3150

5’3” x 12’4” 3770

1606

OPTION 1: base on grass

OPTION 2: base on slabs

OPTION 3: base on concrete

OPTION 4: no base on brick

176 1526 1

174 1527 4

PartNo.

Section Size (mm)

54

56

58

510

512

PageRef

5HE

21 1585 2

47 1504 2 4 6 8 10

4

121 612 1 1 2 3 4

123 612 1 1 2 3 4

124 610 2 2 4 6 8

1 1 2 3 4

2 2 4 6 8

6 6 12 18 24

2 2 4 6 8

PartNo.

Section Size (mm)

54

56

58

510

512

PageRef

170

1836

2

171 2

173 1548 1

761504

2

772

181 460 2

182 460 2

172 1548 1

175 1526 1

179916

2

1802

1 3720 2

5 3100 2

17 2480 2

25 1860 2

55 1240 2

3 3720 2

8 3100 2

14 2480 2

27 1860 2

58 1240 2 2 3720 1

6 3100 1

12 2480 1

26 1860 1

57 1240 1

178 927 2 4 6 8 10

177 1049 2 4

85 /

93

628 /

636

1

1 2 3 4

2

4

53 1284 1

M4

M6

PartNo.

Section Size (mm)

54

56

58

510

512

PageRef

110 120 135 150 160

48m

57m

69m

78m

87m

4000 1

140 170 200 240 275

75 90 105 120 135

105 120 130 145 155

1

5HE

10mm

4

46 1605 3

64 1605 1

4

4

131 304 8

129 299 2

M6

M6

M6

2

Part No mm Quantity

58 1240 2

47 1504 2

55 1240 2

21 1585 2

M6 6

M6 6

4’

Part No mm Quantity

8 3100 2

47 1504 8

5 3100 2

21 1585 4

M6 20

M6 20

Part No mm Quantity

14 2480 2

47 1504 6

17 2480 2

21 1585 4

M6 16

M6 16

Part No mm Quantity

27 1860 2

47 1504 4

25 1860 2

21 1585 4

M6 12

M6 12

Part No mm Quantity

3 3720 2

47 1504 10

1 3720 2

21 1585 4

M6 24

M6 24

6’

8’

10’

12’

58

55

27

25

14

17

8

5

3

1

X 2

X 2

X 2

X 2

X 2

47

21

21

47

47

Part No mm Quantity

76 1504 1

77 1504 1

170 1836 1

171 1836 1

173 1548 1

Part No mm Quantity

174 1527 2

179 916 1

180 916 1

181 460 2

182 460 2

22 22 M6

2 1

173

174

170 / 171 173

76 / 77

173

170 171174

76 77

181

182

179 180

182

181

174

+

179 180

179 / 180

76 / 77

181

174

181

174

182

170 / 171

Part No mm Quantity

76 1504 1

77 1504 1

170 1836 1

171 1836 1

172 1548 1

Part No mm Quantity

174 1527 2

175 1526 1

176 1526 1

179 916 1

180 916 1

30 30 M6

2 1

76 / 77172

174

170 / 171 172

172

170 171174

76 77

179 180

176

175

174

170 / 171

179 / 180

175

179 180

176

174

175

179 / 180

76 / 77

176

174

This bar is currently riveted to the door track assembly (53). Please ignore at this stage. Part 53 fitted in section 10.

Packed with base!

18mm

7mm

If you have a metal base and you live in a windy location then you should drill and fix the frame to the base using 10mm nuts and bolts. Drill centrally between two vertical glazing bars for neatness (it is not essential to drill every section). Make sure the bolt head does NOT interfere with the line of the glass. Cills should be drilled 18mm from the inside vertical face to avoid the front glass face. Do NOT anchor the structure to the ground until the end!

6’ Part No mm Quantity

26 1860 1

178 927 4

93 636 1

177 1049 4 14

1

1 22

3

3 4

4

4’ Part No mm Quantity

57 1240 1

178 927 2

85 119 1

177 1049 2 7 1

177178

177

21

8’ Part No mm Quantity

12 2480 1

178 927 6

93 636 2

177 1049 4 20

12’ Part No mm Quantity

2 3720 1

178 927 10

93 636 4

177 1049 4 32

10’ Part No mm Quantity

6 3100 1

178 927 8

93 636 3

177 1049 4 28

X 2

M4 X 4

85 / 93?

124

121

121

124

610 x 610

M6 10mm X 2

X 2

X 4

M4 X 2

M4 X 2

X 4

X 1

1220mm

Part No mm Quantity

121 612 1

123 612 1

124 610 2

123

610 x 610

Part No mm Quantity

46 1605 3

64 1605 1

Part No mm Quantity

129 299 2

131 304 8

M6 32

32 M6

131

X 4

X 4

X 4

131

131

129

X 2

129

46

6446

46131

131

131

4 m

6.4 m

FLUFF

129

131

131

46

46

46 64

J

C C

GJ

M

G

D

L

M

D

L

Size (mm) 4’ 6’ 8’ 10’ 12’

S 610 X 1500 5 7 9 11 13

R 610 x 940 3 5 6 7 8

A 610 x 610 1 1 2 3 4

U 610 x 345 1 1 2 3 4

C 457 x 1197 4

E 298 x 610 4

F 298 x 205 2

610mm 5

RR

S S S S S S

R

RA

A

UU

CC

P

JJ

F

E

E

F

E

E

P610

205

415 G610

547338

J 633

319

457

S M 610 x 904

D 610 x 153

L 573 x 100

1

1

5

AA A

A A AB

B

P

JJ

F

E

E

F

E

E

BB B

B B B

BB B

B B B

A A A A A A

UU U U U U

BB

Size (mm) 4’ 6’ 8’ 10’ 12’

A 610 X 610 10 14 18 22 26

B 610 X 457 17 21 25 29 33

U 610 X 345 4 6 8 10 12

E 298 x 610 4

F 298 x 205 2

X 457 X 305 4

P610

205

414J

340

26457

Q610

195

404

D 610 x 153 1

L 573 x 100 5

B

A B

B

D

L

D

L

J

B B

B

QJ

B B

A

A

X X

XX

Two brackets are supplied to help support each end of the door track ‘53’ when the doors are in the open position. A hole is pre-punched into the rear face of ‘53’ at each end.

You can also drill a 6mm hole in each of the front roof corner bars if you wish. The holes position is determined by the height at which you have set your doors, attach the bracket to ‘53 firstly and then drill through the other bracket hole.

53

173

53 1284 1

Carefully remove 2 nuts from door rear and attach door stop/handles (see diagrams below). Re attach the nuts!

Attach upper door track 53 to the two bolts left ready in section 2 with nuts (position 53 vertically and push it through the central section between the two glaze bars. Twist 53 so that the slots in the mounting bar are facing upwards). Slide doors into upper track (53) and lower track (173), adjust the height of 53 until the door is running smoothly leaving enough room for the pane of glass above.

SAND

O7mm

No 10 x 2”

Please note you will have to drill and screw through your metal base and into your solid foundation at an angle from outside the building.

Here’s how you can earn £25 and have your new greenhouse feature in our next brochure…. We are always interested to hear how you went on assembling your simplicity greenhouse, and we are particularly interested to see photos of the finished article.We like to see where you’ve put it, how you’re using it and how it looks in your garden. Often we glean ideas from this which we can pass on to other gardeners as useful tips.

It is always nice if we can include ‘real’ greenhouse photos in the brochure, so if you send us a photo of your greenhouse to us and it is good enough to get into our next brochure, we will send you a £25 reward.

Please send your photos to: Photo competition Simplicity Greenhouses Blythe Park Cresswell Stoke-on-TrentStaffsST11 9RD 01782 398600

O r b e t te r s t i l l , e m a i l u s o n sales@simplicitygreenhouses.co.uk

Please write on the reverse of photos your name and address and if you would like them back, please write ‘please return’ on them too

We wish you all the best with your new green-house, and we look forward to seeing your photos in the near future!

To help waterproof the building it is a good idea to use a transparent all-weather silicone inside and outside of the building where there are any gaps. Also the top of the vents can be siliconed.

Vent top corner siliconed along with bar capping.

Inside eave area siliconed.

Outside eave area siliconed with bar capping.

Leave cap to allow water to drain.

No

mm

4’6’

8’10

’12

’

137

202

237

201

337

202

531

002

631

001

831

002

1224

801

1424

802

1724

802

2115

852

44

44

2518

602

2618

601

2718

602

4616

053

33

33

4715

042

46

810

5312

841

11

11

5512

402

5712

401

5812

402

6416

051

11

11

7615

042

22

22

7715

042

22

22

8562

81

No

mm

4’6’

8’10

’12

’

9363

61

23

4

121

612

11

23

4

123

612

11

23

4

124

610

22

46

8

129

299

22

22

2

131

304

88

88

8

170

1836

22

22

2

171

1836

22

22

2

172

1548

11

11

1

173

1548

11

11

1

174

1527

44

44

4

175

1526

11

11

1

176

1526

11

11

1

177

1049

24

44

4

178

927

24

68

10

179

916

22

22

2

180

916

22

22

2

181

460

22

22

2

182

460

22

22

2

11

23

4

4m1

11

11

44

56

6

1 sm

alls

pac

k fo

r rel

evan

t bui

ldin

g